graphql_devise 0.1.1

data/spec/dummy/config/initializers/devise.rb

@@ -0,0 +1,213 @@
+# frozen_string_literal: true
+
+# Use this hook to configure devise mailer, warden hooks and so forth.
+# Many of these configuration options can be set straight in your model.
+Devise.setup do |config|
+  # The secret key used by Devise. Devise uses this key to generate
+  # random tokens. Changing this key will render invalid all existing
+  # confirmation, reset password and unlock tokens in the database.
+  # Devise will use the `secret_key_base` as its `secret_key`
+  # by default. You can change it below and use your own secret key.
+  config.secret_key = 'a467ba2b5402838f5ffeb01167cac97af056f041cde2bba89b2ec4b29631ba2911b959ca60fa167303e8794bf58b1ea91323c78875eaa33308a44ccb4deef5e1'
+
+  # ==> Controller configuration
+  # Configure the parent class to the devise controllers.
+  # config.parent_controller = 'DeviseController'
+
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in Devise::Mailer,
+  # note that it will be overwritten if you use your own mailer class
+  # with default "from" parameter.
+  config.mailer_sender = 'please-change-me-at-config-initializers-devise@example.com'
+
+  # Configure the class responsible to send e-mails.
+  # config.mailer = 'Devise::Mailer'
+
+  # Configure the parent class responsible to send e-mails.
+  # config.parent_mailer = 'ActionMailer::Base'
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require 'devise/orm/active_record'
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating a user. The default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating a user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # You can also supply a hash where the value is a boolean determining whether
+  # or not authentication should be aborted when the value is not present.
+  config.authentication_keys = [:email]
+
+  # Configure parameters from the request object used for authentication. Each entry
+  # given should be a request method and it will automatically be passed to the
+  # find_for_authentication method and considered in your model lookup. For instance,
+  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
+  # The same considerations mentioned for authentication_keys also apply to request_keys.
+  # config.request_keys = []
+
+  # Configure which authentication keys should be case-insensitive.
+  # These keys will be downcased upon creating or modifying a user and when used
+  # to authenticate or find a user. Default is :email.
+  config.case_insensitive_keys = [:email]
+
+  # Configure which authentication keys should have whitespace stripped.
+  # These keys will have whitespace before and after removed upon creating or
+  # modifying a user and when used to authenticate or find a user. Default is :email.
+  config.strip_whitespace_keys = [:email]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # It can be set to an array that will enable params authentication only for the
+  # given strategies, for example, `config.params_authenticatable = [:database]` will
+  # enable it only for database (email + password) authentication.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Auth is enabled. False by default.
+  # It can be set to an array that will enable http authentication only for the
+  # given strategies, for example, `config.http_authenticatable = [:database]` will
+  # enable it only for database authentication. The supported strategies are:
+  # :database      = Support basic authentication with authentication key + password
+  # config.http_authenticatable = false
+
+  # If 401 status code should be returned for AJAX requests. True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication. 'Application' by default.
+  # config.http_authentication_realm = 'Application'
+
+  # It will change confirmation, password recovery and other workflows
+  # to behave the same regardless if the e-mail provided was right or wrong.
+  # Does not affect registerable.
+  # config.paranoid = true
+
+  # By default Devise will store the user in session. You can skip storage for
+  # particular strategies by setting this option.
+  # Notice that if you are skipping storage for all authentication paths, you
+  # may want to disable generating routes to Devise's sessions controller by
+  # passing skip: :sessions to `devise_for` in your config/routes.rb
+  config.skip_session_storage = [:http_auth]
+
+  # By default, Devise cleans up the CSRF token on authentication to
+  # avoid CSRF token fixation attacks. This means that, when using AJAX
+  # requests for sign in and sign up, you need to get a new CSRF token
+  # from the server. You can disable this option at your own risk.
+  # config.clean_up_csrf_token_on_authentication = true
+
+  # When false, Devise will not attempt to reload routes on eager load.
+  # This can reduce the time taken to boot the app but if your application
+  # requires the Devise mappings to be loaded during boot time the application
+  # won't boot properly.
+  # config.reload_routes = true
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 11. If
+  # using other algorithms, it sets how many times you want the password to be hashed.
+  #
+  # Limiting the stretches to just one in testing will increase the performance of
+  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
+  # a value less than 10 in other environments. Note that, for bcrypt (the default
+  # algorithm), the cost increases exponentially with the number of stretches (e.g.
+  # a value of 20 is already extremely slow: approx. 60 seconds for 1 calculation).
+  config.stretches = Rails.env.test? ? 1 : 11
+
+  # Set up a pepper to generate the hashed password.
+  # config.pepper = 'ced2d580bc6502ee4c7c70eb54499e72c04430932a791b1ec4694f7ebecafec05f487517c2f7337a4757e67bcc74fa957d23d89b1ea61cfb48a8ebe31c8dade1'
+
+  # Send a notification to the original email when the user's email is changed.
+  # config.send_email_changed_notification = false
+
+  # Send a notification email when the user's password is changed.
+  # config.send_password_change_notification = false
+
+  # ==> Configuration for :confirmable
+  # A period that the user is allowed to access the website even without
+  # confirming their account. For instance, if set to 2.days, the user will be
+  # able to access the website for two days without confirming their account,
+  # access will be blocked just in the third day. Default is 0.days, meaning
+  # the user cannot access the website without confirming their account.
+  # config.allow_unconfirmed_access_for = 2.days
+
+  # A period that the user is allowed to confirm their account before their
+  # token becomes invalid. For example, if set to 3.days, the user can confirm
+  # their account within 3 days after the mail was sent, but on the fourth day
+  # their account can't be confirmed with the token any more.
+  # Default is nil, meaning there is no restriction on how long a user can take
+  # before confirming their account.
+  # config.confirm_within = 3.days
+
+  # If true, requires any email changes to be confirmed (exactly the same way as
+  # initial account confirmation) to be applied. Requires additional unconfirmed_email
+  # db field (see migrations). Until confirmed, new email is stored in
+  # unconfirmed_email column, and copied to email column on successful confirmation.
+  config.reconfirmable = true
+
+  # Defines which key will be used when confirming an account
+  # config.confirmation_keys = [:email]
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  # config.remember_for = 2.weeks
+
+  # Invalidates all the remember me tokens when the user signs out.
+  config.expire_all_remember_me_on_sign_out = true
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # Options to be passed to the created cookie. For instance, you can set
+  # secure: true in order to force SSL only cookies.
+  # config.rememberable_options = {}
+
+  # ==> Configuration for :validatable
+  # Range for password length.
+  config.password_length = 6..128
+
+  # Email regex used to validate email formats. It simply asserts that
+  # one (and only one) @ exists in the given string. This is mainly
+  # to give user feedback and not to assert the e-mail validity.
+  config.email_regexp = /\A[^@\s]+@[^@\s]+\z/
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again. Default is 30 minutes.
+  # config.timeout_in = 30.minutes
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which key will be used when locking and unlocking an account
+  config.unlock_keys = [:email]
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  config.unlock_in = 1.hour
+
+  # Warn on the last attempt before the account is locked.
+  # config.last_attempt_warning = true
+
+  # ==> Configuration for :recoverable
+  #
+  # Defines which key will be used when recovering the password for an account
+  # config.reset_password_keys = [:email]
+
+  # Time interval you can reset your password with a reset password key.
+  # Don't put a too small interval or your users won't have the time to
+  # change their passwords.
+  config.reset_password_within = 6.hours
+end

data/spec/dummy/config/initializers/devise_token_auth.rb

@@ -0,0 +1,55 @@
+# frozen_string_literal: true
+
+DeviseTokenAuth.setup do |config|
+  # By default the authorization headers will change after each request. The
+  # client is responsible for keeping track of the changing tokens. Change
+  # this to false to prevent the Authorization header from changing after
+  # each request.
+  # config.change_headers_on_each_request = true
+
+  # By default, users will need to re-authenticate after 2 weeks. This setting
+  # determines how long tokens will remain valid after they are issued.
+  # config.token_lifespan = 2.weeks
+
+  # Limiting the token_cost to just 4 in testing will increase the performance of
+  # your test suite dramatically. The possible cost value is within range from 4
+  # to 31. It is recommended to not use a value more than 10 in other environments.
+  # config.token_cost = Rails.env.test? ? 4 : 10
+
+  # Sets the max number of concurrent devices per user, which is 10 by default.
+  # After this limit is reached, the oldest tokens will be removed.
+  # config.max_number_of_devices = 10
+
+  # Sometimes it's necessary to make several requests to the API at the same
+  # time. In this case, each request in the batch will need to share the same
+  # auth token. This setting determines how far apart the requests can be while
+  # still using the same auth token.
+  # config.batch_request_buffer_throttle = 5.seconds
+
+  # This route will be the prefix for all oauth2 redirect callbacks. For
+  # example, using the default '/omniauth', the github oauth2 provider will
+  # redirect successful authentications to '/omniauth/github/callback'
+  # config.omniauth_prefix = "/omniauth"
+
+  # By default sending current password is not needed for the password update.
+  # Uncomment to enforce current_password param to be checked before all
+  # attribute updates. Set it to :password if you want it to be checked only if
+  # password is updated.
+  # config.check_current_password_before_update = :attributes
+
+  # By default we will use callbacks for single omniauth.
+  # It depends on fields like email, provider and uid.
+  # config.default_callbacks = true
+
+  # Makes it possible to change the headers names
+  # config.headers_names = {:'access-token' => 'access-token',
+  #                        :'client' => 'client',
+  #                        :'expiry' => 'expiry',
+  #                        :'uid' => 'uid',
+  #                        :'token-type' => 'token-type' }
+
+  # By default, only Bearer Token authentication is implemented out of the box.
+  # If, however, you wish to integrate with legacy Devise authentication, you can
+  # do so by enabling this flag. NOTE: This feature is highly experimental!
+  # config.enable_standard_devise_support = false
+end

data/spec/dummy/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

data/spec/dummy/config/initializers/inflections.rb

@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym 'RESTful'
+# end

data/spec/dummy/config/initializers/mime_types.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf

data/spec/dummy/config/initializers/wrap_parameters.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json]
+end
+
+# To enable root element in JSON for ActiveRecord objects.
+# ActiveSupport.on_load(:active_record) do
+#   self.include_root_in_json = true
+# end

data/spec/dummy/config/locales/en.yml

@@ -0,0 +1,33 @@
+# Files in the config/locales directory are used for internationalization
+# and are automatically loaded by Rails. If you want to use locales other
+# than English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t 'hello'
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t('hello') %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# The following keys must be escaped otherwise they will not be retrieved by
+# the default I18n backend:
+#
+# true, false, on, off, yes, no
+#
+# Instead, surround them with single quotes.
+#
+# en:
+#   'true': 'foo'
+#
+# To learn more, please read the Rails Internationalization guide
+# available at http://guides.rubyonrails.org/i18n.html.
+
+en:
+  hello: "Hello world"

data/spec/dummy/config/master.key

@@ -0,0 +1 @@
+46804cd14fb86423326fd402c4b455cf

data/spec/dummy/config/puma.rb

@@ -0,0 +1,34 @@
+# Puma can serve each request in a thread from an internal thread pool.
+# The `threads` method setting takes two numbers: a minimum and maximum.
+# Any libraries that use thread pools should be configured to match
+# the maximum value specified for Puma. Default is set to 5 threads for minimum
+# and maximum; this matches the default thread size of Active Record.
+#
+threads_count = ENV.fetch("RAILS_MAX_THREADS") { 5 }
+threads threads_count, threads_count
+
+# Specifies the `port` that Puma will listen on to receive requests; default is 3000.
+#
+port        ENV.fetch("PORT") { 3000 }
+
+# Specifies the `environment` that Puma will run in.
+#
+environment ENV.fetch("RAILS_ENV") { "development" }
+
+# Specifies the number of `workers` to boot in clustered mode.
+# Workers are forked webserver processes. If using threads and workers together
+# the concurrency of the application would be max `threads` * `workers`.
+# Workers do not work on JRuby or Windows (both of which do not support
+# processes).
+#
+# workers ENV.fetch("WEB_CONCURRENCY") { 2 }
+
+# Use the `preload_app!` method when specifying a `workers` number.
+# This directive tells Puma to first boot the application and load code
+# before forking the application. This takes advantage of Copy On Write
+# process behavior so workers use less memory.
+#
+# preload_app!
+
+# Allow puma to be restarted by `rails restart` command.
+plugin :tmp_restart

data/spec/dummy/config/routes.rb

@@ -0,0 +1,5 @@
+Rails.application.routes.draw do
+  mount_graphql_devise_for 'User', at: 'api/v1', mutations: {
+    login: Mutations::Login
+  }
+end

data/spec/dummy/config/secrets.yml

@@ -0,0 +1,17 @@
+common_env: &common
+  secret_key_base: 'secret_key_here'
+
+development:
+  <<: *common
+
+test:
+  <<: *common
+
+dev:
+  <<: *common
+
+staging:
+  <<: *common
+
+production:
+  <<: *common

data/spec/dummy/config/spring.rb

@@ -0,0 +1,6 @@
+%w[
+  .ruby-version
+  .rbenv-vars
+  tmp/restart.txt
+  tmp/caching-dev.txt
+].each { |path| Spring.watch(path) }

data/spec/dummy/config.ru

@@ -0,0 +1,5 @@
+# This file is used by Rack-based servers to start the application.
+
+require_relative 'config/environment'
+
+run Rails.application

data/spec/dummy/db/migrate/20190815114303_create_users.rb

@@ -0,0 +1,53 @@
+class CreateUsers < ActiveRecord::Migration[5.2]
+  def change
+    create_table :users do |t|
+      ## Required
+      t.string :provider, null: false, default: 'email'
+      t.string :uid, null: false, default: ''
+
+      ## Database authenticatable
+      t.string :encrypted_password, null: false, default: ''
+
+      ## Recoverable
+      t.string   :reset_password_token
+      t.datetime :reset_password_sent_at
+      t.boolean  :allow_password_change, default: false
+
+      ## Rememberable
+      t.datetime :remember_created_at
+
+      ## Confirmable
+      t.string   :confirmation_token
+      t.datetime :confirmed_at
+      t.datetime :confirmation_sent_at
+      t.string   :unconfirmed_email # Only if using reconfirmable
+
+      ## Lockable
+      t.integer  :failed_attempts, default: 0, null: false # Only if lock strategy is :failed_attempts
+      t.string   :unlock_token # Only if unlock strategy is :email or :both
+      t.datetime :locked_at
+
+      # Trackable
+      t.datetime :current_sign_in_at
+      t.datetime :last_sign_in_at
+      t.string   :last_sign_in_ip
+      t.string   :current_sign_in_ip
+      t.integer  :sign_in_count
+
+      ## User Info
+      t.string :name
+      t.string :email
+
+      ## Tokens
+      t.text :tokens
+
+      t.timestamps
+    end
+
+    add_index :users, :email,                unique: true
+    add_index :users, [:uid, :provider],     unique: true
+    add_index :users, :reset_password_token, unique: true
+    add_index :users, :confirmation_token,   unique: true
+    add_index :users, :unlock_token,         unique: true
+  end
+end

data/spec/dummy/db/migrate/20190824215150_add_auth_available_to_users.rb

@@ -0,0 +1,5 @@
+class AddAuthAvailableToUsers < ActiveRecord::Migration[5.2]
+  def change
+    add_column :users, :auth_available, :boolean, null: false, default: true
+  end
+end

data/spec/dummy/db/schema.rb

@@ -0,0 +1,48 @@
+# This file is auto-generated from the current state of the database. Instead
+# of editing this file, please use the migrations feature of Active Record to
+# incrementally modify your database, and then regenerate this schema definition.
+#
+# Note that this schema.rb definition is the authoritative source for your
+# database schema. If you need to create the application database on another
+# system, you should be using db:schema:load, not running all the migrations
+# from scratch. The latter is a flawed and unsustainable approach (the more migrations
+# you'll amass, the slower it'll run and the greater likelihood for issues).
+#
+# It's strongly recommended that you check this file into your version control system.
+
+ActiveRecord::Schema.define(version: 2019_08_24_215150) do
+
+  create_table "users", force: :cascade do |t|
+    t.string "provider", default: "email", null: false
+    t.string "uid", default: "", null: false
+    t.string "encrypted_password", default: "", null: false
+    t.string "reset_password_token"
+    t.datetime "reset_password_sent_at"
+    t.boolean "allow_password_change", default: false
+    t.datetime "remember_created_at"
+    t.string "confirmation_token"
+    t.datetime "confirmed_at"
+    t.datetime "confirmation_sent_at"
+    t.string "unconfirmed_email"
+    t.integer "failed_attempts", default: 0, null: false
+    t.string "unlock_token"
+    t.datetime "locked_at"
+    t.datetime "current_sign_in_at"
+    t.datetime "last_sign_in_at"
+    t.string "last_sign_in_ip"
+    t.string "current_sign_in_ip"
+    t.integer "sign_in_count"
+    t.string "name"
+    t.string "email"
+    t.text "tokens"
+    t.datetime "created_at", null: false
+    t.datetime "updated_at", null: false
+    t.boolean "auth_available", default: true, null: false
+    t.index ["confirmation_token"], name: "index_users_on_confirmation_token", unique: true
+    t.index ["email"], name: "index_users_on_email", unique: true
+    t.index ["reset_password_token"], name: "index_users_on_reset_password_token", unique: true
+    t.index ["uid", "provider"], name: "index_users_on_uid_and_provider", unique: true
+    t.index ["unlock_token"], name: "index_users_on_unlock_token", unique: true
+  end
+
+end

data/spec/dummy/db/seeds.rb

@@ -0,0 +1,7 @@
+# This file should contain all the record creation needed to seed the database with its default values.
+# The data can then be loaded with the rails db:seed command (or created alongside the database with db:setup).
+#
+# Examples:
+#
+#   movies = Movie.create([{ name: 'Star Wars' }, { name: 'Lord of the Rings' }])
+#   Character.create(name: 'Luke', movie: movies.first)