gosu 0.8.0.pre3 → 0.8.0.pre4

data/dependencies/libvorbis/lib/window.h

@@ -1,26 +0,0 @@
-/********************************************************************
- *                                                                  *
- * THIS FILE IS PART OF THE OggVorbis SOFTWARE CODEC SOURCE CODE.   *
- * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS     *
- * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE *
- * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING.       *
- *                                                                  *
- * THE OggVorbis SOURCE CODE IS (C) COPYRIGHT 1994-2007             *
- * by the Xiph.Org Foundation http://www.xiph.org/                  *
- *                                                                  *
- ********************************************************************
-
- function: window functions
- last mod: $Id: window.h 13293 2007-07-24 00:09:47Z xiphmont $
-
- ********************************************************************/
-
-#ifndef _V_WINDOW_
-#define _V_WINDOW_
-
-extern float *_vorbis_window_get(int n);
-extern void _vorbis_apply_window(float *d,int *winno,long *blocksizes,
-                          int lW,int W,int nW);
-
-
-#endif

data/dependencies/ogg_vorbis.license

@@ -1,28 +0,0 @@
-May contain `ogg', `vorbis' libraries (c) 2002-2008 Xiph.org Foundation
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-
-- Redistributions of source code must retain the above copyright
-notice, this list of conditions and the following disclaimer.
-
-- Redistributions in binary form must reproduce the above copyright
-notice, this list of conditions and the following disclaimer in the
-documentation and/or other materials provided with the distribution.
-
-- Neither the name of the Xiph.org Foundation nor the names of its
-contributors may be used to endorse or promote products derived from
-this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION
-OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

data/reference/gosu.rb

@@ -1,1284 +0,0 @@
-##
-# The first component of the version.
-GOSU_MAJOR_VERSION = :a_fixnum
-
-##
-# The second component of the version.
-GOSU_MINOR_VERSION = :a_fixnum
-
-##
-# The third component of the version.
-GOSU_POINT_VERSION = :a_fixnum
-
-##
-# A version string of the form "0.1.2" or "0.1.2.3".
-GOSU_VERSION = "#{GOSU_MAJOR_VERSION}.#{GOSU_MINOR_VERSION}.#{GOSU_POINT_VERSION}"
-
-##
-# A long block of legal copy that your game is obliged to display somewhere.
-GOSU_COPYRIGHT_NOTICE = :a_string
-
-module Gosu
-  Kb0 = :implementation_defined
-  Kb1 = :implementation_defined
-  Kb2 = :implementation_defined
-  Kb3 = :implementation_defined
-  Kb4 = :implementation_defined
-  Kb5 = :implementation_defined
-  Kb6 = :implementation_defined
-  Kb7 = :implementation_defined
-  Kb8 = :implementation_defined
-  Kb9 = :implementation_defined
-  KbA = :implementation_defined
-  KbB = :implementation_defined
-  KbC = :implementation_defined
-  KbD = :implementation_defined
-  KbE = :implementation_defined
-  KbF = :implementation_defined
-  KbG = :implementation_defined
-  KbH = :implementation_defined
-  KbI = :implementation_defined
-  KbJ = :implementation_defined
-  KbK = :implementation_defined
-  KbL = :implementation_defined
-  KbM = :implementation_defined
-  KbN = :implementation_defined
-  KbO = :implementation_defined
-  KbP = :implementation_defined
-  KbQ = :implementation_defined
-  KbR = :implementation_defined
-  KbS = :implementation_defined
-  KbT = :implementation_defined
-  KbU = :implementation_defined
-  KbV = :implementation_defined
-  KbW = :implementation_defined
-  KbX = :implementation_defined
-  KbY = :implementation_defined
-  KbZ = :implementation_defined
-  KbBackspace = :implementation_defined
-  KbDelete = :implementation_defined
-  KbDown = :implementation_defined
-  KbEnd = :implementation_defined
-  
-  ##
-  # This is the key on the numpad.
-  KbEnter = :implementation_defined
-  
-  KbEscape = :implementation_defined
-  KbF1 = :implementation_defined
-  KbF10 = :implementation_defined
-  KbF11 = :implementation_defined
-  KbF12 = :implementation_defined
-  KbF2 = :implementation_defined
-  KbF3 = :implementation_defined
-  KbF4 = :implementation_defined
-  KbF5 = :implementation_defined
-  KbF6 = :implementation_defined
-  KbF7 = :implementation_defined
-  KbF8 = :implementation_defined
-  KbF9 = :implementation_defined
-  KbHome = :implementation_defined
-  KbInsert = :implementation_defined
-  KbLeft = :implementation_defined
-  KbLeftAlt = :implementation_defined
-  KbLeftControl = :implementation_defined
-  KbLeftShift = :implementation_defined
-  KbNumpad0 = :implementation_defined
-  KbNumpad1 = :implementation_defined
-  KbNumpad2 = :implementation_defined
-  KbNumpad3 = :implementation_defined
-  KbNumpad4 = :implementation_defined
-  KbNumpad5 = :implementation_defined
-  KbNumpad6 = :implementation_defined
-  KbNumpad7 = :implementation_defined
-  KbNumpad8 = :implementation_defined
-  KbNumpad9 = :implementation_defined
-  KbNumpadAdd = :implementation_defined
-  KbNumpadDivide = :implementation_defined
-  KbNumpadMultiply = :implementation_defined
-  KbNumpadSubtract = :implementation_defined
-  KbPageDown = :implementation_defined
-  KbPageUp = :implementation_defined
-  
-  ##
-  # This is the key above the right shift key.
-  KbReturn = :implementation_defined
-  
-  KbRight = :implementation_defined
-  KbRightAlt = :implementation_defined
-  KbRightControl = :implementation_defined
-  KbRightShift = :implementation_defined
-  KbSpace = :implementation_defined
-  KbTab = :implementation_defined
-  KbUp = :implementation_defined
-  KbBacktick = :implementation_defined
-  KbMinus = :implementation_defined
-  KbEqual = :implementation_defined
-  KbBracketLeft = :implementation_defined
-  KbBracketRight = :implementation_defined
-  KbBackslash = :implementation_defined
-  KbSemicolon = :implementation_defined
-  KbApostrophe = :implementation_defined
-  KbComma = :implementation_defined
-  KbPeriod = :implementation_defined
-  KbSlash = :implementation_defined
-  
-  MsLeft = :implementation_defined
-  MsMiddle = :implementation_defined
-  MsRight = :implementation_defined
-  MsWheelDown = :implementation_defined
-  MsWheelUp = :implementation_defined
-  MsOther0 = :implementation_defined
-  MsOther1 = :implementation_defined
-  MsOther2 = :implementation_defined
-  MsOther3 = :implementation_defined
-  MsOther4 = :implementation_defined
-  MsOther5 = :implementation_defined
-  MsOther6 = :implementation_defined
-  MsOther7 = :implementation_defined
-  
-  GpButton0 = :implementation_defined
-  GpButton1 = :implementation_defined
-  GpButton10 = :implementation_defined
-  GpButton11 = :implementation_defined
-  GpButton12 = :implementation_defined
-  GpButton13 = :implementation_defined
-  GpButton14 = :implementation_defined
-  GpButton15 = :implementation_defined
-  GpButton2 = :implementation_defined
-  GpButton3 = :implementation_defined
-  GpButton4 = :implementation_defined
-  GpButton5 = :implementation_defined
-  GpButton6 = :implementation_defined
-  GpButton7 = :implementation_defined
-  GpButton8 = :implementation_defined
-  GpButton9 = :implementation_defined
-  GpDown = :implementation_defined
-  GpLeft = :implementation_defined
-  GpRight = :implementation_defined
-  GpUp = :implementation_defined
-  Gp0Button0 = :implementation_defined
-  Gp0Button1 = :implementation_defined
-  Gp0Button10 = :implementation_defined
-  Gp0Button11 = :implementation_defined
-  Gp0Button12 = :implementation_defined
-  Gp0Button13 = :implementation_defined
-  Gp0Button14 = :implementation_defined
-  Gp0Button15 = :implementation_defined
-  Gp0Button2 = :implementation_defined
-  Gp0Button3 = :implementation_defined
-  Gp0Button4 = :implementation_defined
-  Gp0Button5 = :implementation_defined
-  Gp0Button6 = :implementation_defined
-  Gp0Button7 = :implementation_defined
-  Gp0Button8 = :implementation_defined
-  Gp0Button9 = :implementation_defined
-  Gp0Down = :implementation_defined
-  Gp0Left = :implementation_defined
-  Gp0Right = :implementation_defined
-  Gp0Up = :implementation_defined
-  Gp1Button0 = :implementation_defined
-  Gp1Button1 = :implementation_defined
-  Gp1Button10 = :implementation_defined
-  Gp1Button11 = :implementation_defined
-  Gp1Button12 = :implementation_defined
-  Gp1Button13 = :implementation_defined
-  Gp1Button14 = :implementation_defined
-  Gp1Button15 = :implementation_defined
-  Gp1Button2 = :implementation_defined
-  Gp1Button3 = :implementation_defined
-  Gp1Button4 = :implementation_defined
-  Gp1Button5 = :implementation_defined
-  Gp1Button6 = :implementation_defined
-  Gp1Button7 = :implementation_defined
-  Gp1Button8 = :implementation_defined
-  Gp1Button9 = :implementation_defined
-  Gp1Down = :implementation_defined
-  Gp1Left = :implementation_defined
-  Gp1Right = :implementation_defined
-  Gp1Up = :implementation_defined
-  Gp2Button0 = :implementation_defined
-  Gp2Button1 = :implementation_defined
-  Gp2Button10 = :implementation_defined
-  Gp2Button11 = :implementation_defined
-  Gp2Button12 = :implementation_defined
-  Gp2Button13 = :implementation_defined
-  Gp2Button14 = :implementation_defined
-  Gp2Button15 = :implementation_defined
-  Gp2Button2 = :implementation_defined
-  Gp2Button3 = :implementation_defined
-  Gp2Button4 = :implementation_defined
-  Gp2Button5 = :implementation_defined
-  Gp2Button6 = :implementation_defined
-  Gp2Button7 = :implementation_defined
-  Gp2Button8 = :implementation_defined
-  Gp2Button9 = :implementation_defined
-  Gp2Down = :implementation_defined
-  Gp2Left = :implementation_defined
-  Gp2Right = :implementation_defined
-  Gp2Up = :implementation_defined
-  Gp3Button0 = :implementation_defined
-  Gp3Button1 = :implementation_defined
-  Gp3Button10 = :implementation_defined
-  Gp3Button11 = :implementation_defined
-  Gp3Button12 = :implementation_defined
-  Gp3Button13 = :implementation_defined
-  Gp3Button14 = :implementation_defined
-  Gp3Button15 = :implementation_defined
-  Gp3Button2 = :implementation_defined
-  Gp3Button3 = :implementation_defined
-  Gp3Button4 = :implementation_defined
-  Gp3Button5 = :implementation_defined
-  Gp3Button6 = :implementation_defined
-  Gp3Button7 = :implementation_defined
-  Gp3Button8 = :implementation_defined
-  Gp3Button9 = :implementation_defined
-  Gp3Down = :implementation_defined
-  Gp3Left = :implementation_defined
-  Gp3Right = :implementation_defined
-  Gp3Up = :implementation_defined
-  
-  ##
-  # Represents an ARGB color value with 8 bits for each channel. Colors can be used interchangeably with integer literals of the form 0xAARRGGBB in all Gosu APIs.
-  class Color
-    ##
-    # @return [Fixnum] the color's alpha channel.
-    attr_accessor :alpha
-    
-    ##
-    # @return [Fixnum] the color's red channel.
-    attr_accessor :red
-    
-    ##
-    # @return [Fixnum] the color's green channel.
-    attr_accessor :green
-    
-    ##
-    # @return [Fixnum] the color's blue channel.
-    attr_accessor :blue
-    
-    ##
-    # @return [Fixnum] the color's hue in the range (0...360).
-    attr_accessor :hue
-    
-    ##
-    # @return [Float] the color's saturation in the range (0..1).
-    attr_accessor :saturation
-    
-    ##
-    # @return [Float] the color's value in the range (0..1).
-    attr_accessor :value
-    
-    # @!group Creating colors.
-    
-    ##
-    # @overload initialize(argb)
-    #   @param argb [Fixnum] an integer of the form 0xAARRGGBB.
-    # 
-    # @overload initialize(a, r, g, b)
-    #   @param a [Fixnum] the color's alpha channel in the range (0..255).
-    #   @param r [Fixnum] the color's red channel in the range (0..255).
-    #   @param g [Fixnum] the color's green channel in the range (0..255).
-    #   @param b [Fixnum] the color's blue channel in the range (0..255).
-    # 
-    # @see from_hsv
-    # @see from_ahsv
-    # @see rgba
-    # @see argb
-    def initialize(*args); end
-    
-    ##
-    # @return (see #initialize)
-    # 
-    # @overload rgba(rgba)
-    #   @param argb [Fixnum] an integer of the form 0xRRGGBBAA.
-    # 
-    # @overload rgba(r, g, b, a)
-    #   @param r [Fixnum] the color's red channel in the range (0..255).
-    #   @param g [Fixnum] the color's green channel in the range (0..255).
-    #   @param b [Fixnum] the color's blue channel in the range (0..255).
-    #   @param a [Fixnum] the color's alpha channel in the range (0..255).
-    # 
-    # @see #initialize
-    # @see argb
-    def self.rgba(*args); end
-    
-    # This method is equivalent to calling `Color.new`, but the name makes the parameter order explicit.
-    # 
-    # @return (see #initialize)
-    # @overload argb(argb)
-    # @overload argb(a, r, g, b)
-    # 
-    # @see #initialize
-    # @see rgba
-    def self.argb(*args); end
-    
-    # Converts an HSV triplet to an opaque color.
-    # 
-    # @return [Color] a color corresponding to the HSV triplet.
-    # @param h [Fixnum] the color's hue in the range (0..360).
-    # @param s [Float] the color's saturation in the range (0..1).
-    # @param v [Float] the color's value in the range (0..1).
-    # 
-    # @see from_ahsv
-    def self.from_hsv(h, s, v); end
-    
-    # Converts an HSV triplet to a color with the alpha channel set to a given value.
-    # 
-    # @return (see from_hsv)
-    # @param a [Fixnum] the color's opacity in the range (0..255).
-    # @param (see from_hsv)
-    # 
-    # @see from_hsv
-    def self.from_ahsv(a, h, s, v); end
-    
-    # @!endgroup
-    
-    # Returns a 32-bit representation of the color suitable for use with OpenGL calls. This color is stored in a fixed order in memory and its integer value may vary depending on your system's byte order.
-    # 
-    # @return [Fixnum] a 32-bit OpenGL color.
-    def gl; end
-    
-    ##
-    # @return [Color] a copy of the color.
-    def dup; end
-    
-    NONE    = Gosu::Color.argb(0x00000000)
-    BLACK   = Gosu::Color.argb(0xff000000)
-    GRAY    = Gosu::Color.argb(0xff808080)
-    WHITE   = Gosu::Color.argb(0xffffffff)
-    AQUA    = Gosu::Color.argb(0xff00ffff)
-    RED     = Gosu::Color.argb(0xffff0000)
-    GREEN   = Gosu::Color.argb(0xff00ff00)
-    BLUE    = Gosu::Color.argb(0xff0000ff)
-    YELLOW  = Gosu::Color.argb(0xffffff00)
-    FUCHSIA = Gosu::Color.argb(0xffff00ff)
-    CYAN    = Gosu::Color.argb(0xff00ffff)
-  end
-  
-  ##
-  # A font can be used to draw text on a Window object very flexibly.
-  # Fonts are ideal for small texts that change regularly. For large,
-  # static texts you should use {Gosu::Image#from_text}.
-  class Font
-    ##
-    # The font's name. This may be the name of a system font or a filename.
-    # 
-    # @return [String] the font's name.
-    attr_reader :name
-    
-    ##
-    # @return [Fixnum] The font's height in pixels.
-    attr_reader :height
-    
-    ##
-    # Load a font from the system fonts or a file.
-    # 
-    # @param window [Gosu::Window]
-    # @param font_name [String] the name of a system font, or a path to a TrueType Font (TTF) file. A path must contain at least one '/' character to distinguish it from a system font.
-    # @param height [Fixnum] the height of the font, in pixels.
-    def initialize(window, font_name, height); end
-    
-    ##
-    # Overrides the image for a character.
-    # 
-    # @note For any given character, this method MUST NOT be called more than once, and MUST NOT be called if a string containing the character has already been drawn.
-    # 
-    # @return [void]
-    # @param character [String] the character to replace.
-    # @param image [Image] the image to use for the character.
-    def []=(character, image); end
-    
-    # @!group Drawing text
-    
-    ##
-    # Draws a single line of text with its top left corner at (x, y).
-    # 
-    # @return [void]
-    # @param text [String]
-    # @param x [Number] the X coordinate
-    # @param y [Number] the Y coordinate
-    # @param z [Number] the Z-order.
-    # @param factor_x [Float] the horizontal scaling factor.
-    # @param factor_y [Float] the vertical scaling factor.
-    # @param color [Color, Fixnum]
-    # @param mode [:default, :additive] the blending mode to use.
-    # 
-    # @see #draw_rel
-    # @see Gosu::Image.from_text
-    # @see file:reference/Drawing_with_Colors.md Drawing with Colors
-    # @see file:reference/Z-Ordering.md
-    def draw(text, x, y, z, factor_x=1, factor_y=1, color=0xffffffff, mode=:default); end
-    
-    ##
-    # Draws a single line of text relative to (x, y).
-    # 
-    # The text is aligned to the drawing location according to the `rel_x` and `rel_y` parameters: a value of 0.0 corresponds to top and left, while 1.0 corresponds to bottom and right. A value of 0.5 naturally corresponds to the center of the text.
-    # 
-    # All real numbers are valid alignment values and will be interpolated (or extrapolated) accordingly.
-    # 
-    # @return [void]
-    # @param rel_x [Float] the horizontal alignment.
-    # @param rel_y [Float] the vertical alignment.
-    # @param (see #draw)
-    # 
-    # @see #draw
-    # @see file:reference/Drawing_with_Colors.md Drawing with Colors
-    # @see file:reference/Z-Ordering.md
-    def draw_rel(text, x, y, z, rel_x, rel_y, factor_x=1, factor_y=1, color=0xffffffff, mode=:default); end
-    
-    ##
-    # @deprecated Use {#draw} in conjunction with {Window#rotate} instead.
-    # 
-    # @see #draw
-    # @see Gosu::Window#rotate
-    def draw_rot(text, x, y, z, angle, factor_x=1, factor_y=1, color=0xffffffff, mode=:default); end
-    
-    # @!endgroup
-    
-    ##
-    # Returns the width of a single line of text, in pixels, if it were drawn.
-    # 
-    # @return [Fixnum] the width of the text, in pixels.
-    # @param text [String]
-    def text_width(text, factor_x=1); end
-  end
-  
-  ##
-  # Provides functionality for drawing rectangular images.
-  class Image
-    ##
-    # @return [Fixnum] the image's width, in pixels.
-    attr_reader :width
-    
-    ##
-    # @return [Fixnum] the image's height, in pixels.
-    attr_reader :height
-    
-    # @!group Creating and loading images
-    
-    ##
-    # Loads an image from a file or an RMagick image.
-    # 
-    # @note For Windows Bitmap (BMP) images, magenta (FF00FF, often called "magic pink" in this context) is treated as a chroma key and all pixels of that color are automatically rendered fully transparent.
-    #
-    # @param window [Window]
-    # @param source [String, Magick::Image] the filename or RMagick image to load from.
-    # @param tileable [true, false]
-    # @param left [Fixnum]
-    # @param top [Fixnum]
-    # @param width [Fixnum]
-    # @param height [Fixnum]
-    # 
-    # @overload initialize(window, source, tileable)
-    # @overload initialize(window, source, tileable, left, top, width, height)
-    #   Loads a rectangular slice of the image.
-    #   
-    #   If you need to load multiple tiles from a texture atlas, {load_tiles} is almost always a better choice.
-    #   
-    # 
-    # @see load_tiles
-    # @see from_text
-    # @see file:reference/Tileability.md
-    def initialize(window, source, tileable, left, top, width, height); end
-    
-    ##
-    # Creates a reusable image from one or more lines of text.
-    #
-    # The text is always rendered in white. To draw it in a different color, use the `color` parameter of {#draw}, et al.
-    # 
-    # @overload from_text(window, text, font_name, font_height)
-    # @overload from_text(window, text, font_name, font_height, line_spacing, width, align)
-    # 
-    # @return [Gosu::Image]
-    # @param window [Gosu::Window]
-    # @param text [String]
-    # @param font_name [String] the name of a system font, or a path to a TrueType Font (TTF) file. A path must contain at least one '/' character to distinguish it from a system font.
-    # @param font_height [Fixnum] the height of the font, in pixels.
-    # @param line_spacing [Fixnum] the vertical spacing beteen lines.
-    # @param width [Fixnum] the width of the image, in pixels. Long lines will be automatically wrapped around to avoid overflow, but overlong words will be truncated.
-    # @param align [:left, :right, :center, :justify] the text alignment.
-    # 
-    # @see Gosu::Font
-    def self.from_text(window, text, font_name, font_height, line_spacing, width, align); end
-    
-    ##
-    # Loads an image from a file or an RMagick image, then divides the image into an array of equal-sized tiles.
-    # 
-    # @note For Windows Bitmap (BMP) images, magenta (FF00FF, often called "magic pink" in this context) is treated as a chroma key and all pixels of that color are automatically rendered fully transparent.
-    #
-    # @return [Array<Gosu::Image>]
-    # @param window [Window]
-    # @param source [String, Magick::Image]
-    # @param tile_width [Fixnum] If positive, this is the width of the individual tiles; if negative, the image is divided into -tile_width columns.
-    # @param tile_height [Fixnum] If positive, this is the height of the individual tiles; if negative, the image is divided into -tile_height rows.
-    # @param tileable [true, false]
-    # 
-    # @see file:reference/Tileability.md
-    def self.load_tiles(window, source, tile_width, tile_height, tileable); end
-    
-    # @!endgroup
-    
-    # @!group Drawing an image
-    
-    ##
-    # Draws the image with its top left corner at (x, y).
-    # 
-    # @return [void]
-    # @param x [Float] the X coordinate.
-    # @param y [Float] the X coordinate.
-    # @param z [Float] the Z-order.
-    # @param factor_x [Float] the horizontal scaling factor.
-    # @param factor_y [Float] the vertical scaling factor.
-    # @param color [Gosu::Color, Integer]
-    # @param mode [:default, :additive] the blending mode to use.
-    # 
-    # @see #draw_rot
-    # @see #draw_as_quad
-    # @see file:reference/Drawing_with_Colors.md Drawing with Colors
-    # @see file:reference/Z-Ordering.md
-    def draw(x, y, z, factor_x=1, factor_y=1, color=0xffffffff, mode=:default); end
-    
-    ##
-    # Draws the image rotated, with its rotational center at (x, y).
-    # 
-    # @return [void]
-    # @param angle [Float]
-    # @param center_x [Float] the relative horizontal rotation origin.
-    # @param center_y [Float] the relative vertical rotation origin.
-    # @param (see #draw)
-    # 
-    # @see #draw
-    # @see file:reference/Drawing_with_Colors.md Drawing with Colors
-    # @see file:reference/Z-Ordering.md
-    def draw_rot(x, y, z, angle, center_x=0.5, center_y=0.5, factor_x=1, factor_y=1, color=0xffffffff, mode=:default); end
-    
-    ##
-    # Draws the image as an arbitrary quad. This method can be used for advanced non-rectangular drawing techniques, e.g., faking perspective or isometric projection.
-    # 
-    # @return [void]
-    # @param (see Gosu::Window#draw_quad)
-    # 
-    # @see #draw
-    # @see Gosu::Window#draw_quad
-    # @see file:reference/Drawing_with_Colors.md Drawing with Colors
-    # @see file:reference/Order_of_Corners.md Order of Corners
-    # @see file:reference/Z-Ordering.md
-    def draw_as_quad(x1, y1, c1, x2, y2, c2, x3, y3, c3, x4, y4, c4, z, mode=:default); end
-    
-    # @!endgroup
-    
-    ##
-    # Returns an object that holds information about the underlying OpenGL texture and UV coordinates of the image.
-    # 
-    # @note Some images may be too large to fit on a single texture; this method returns nil in those cases.
-    # 
-    # @return [Gosu::GLTexInfo?] information about the underlying OpenGL texture.
-    # 
-    # @see Gosu::GLTexInfo
-    # @see file:examples/OpenGLIntegration.rb
-    def gl_tex_info; end
-    
-    ##
-    # Returns the associated texture contents as binary string of packed RGBA values, useful for use with RMagick (Magick::Image.from_blob).
-    # 
-    # @return [String] a binary string of packed RGBA values.
-    def to_blob; end
-    
-    ##
-    # Overwrites part of the image with the contents of another. If the source image is partially out of bounds, it will be clipped to fit.
-    # 
-    # This can be used to e.g. overwrite parts of a landscape.
-    # 
-    # @return [void]
-    # @param source [String, Magick::Image] the filename or RMagick image to load from.
-    # @param x [Fixnum] the X coordinate of the top left corner.
-    # @param y [Fixnum] the Y coordinate of the top left corner.
-    def insert(source, x, y); end
-    
-    ##
-    # Saves the image to a file. The file format is determined from the file extension.
-    # 
-    # Useful for, e.g., pre-rendering text on a development machine where the necessary fonts are known to be available.
-    # 
-    # @return [void]
-    # @param filename [String] the path to save the file under.
-    def save(filename); end
-  end
-  
-  ##
-  # A sample is a short sound that is completely loaded in memory, can be
-  # played multiple times at once and offers very flexible playback
-  # parameters. Use samples for everything that's not music.
-  # 
-  # @see Gosu::Song
-  class Sample
-    ##
-    # Loads a sample from a file.
-    # 
-    # @param window [Gosu::Window]
-    # @param filename [String] the path to load the sample from.
-    def initialize(window, filename); end
-    
-    ##
-    # Plays the sample without panning.
-    # 
-    # Playback speed is limited only by the underlying audio library, and both very large and very small values should work just fine.
-    #
-    # @return [SampleInstance]
-    # @param volume [Float] the playback volume, in the range (0..1), where 0 is completely silent and 1 is full volume.
-    # @param speed [Float] the playback speed.
-    # @param looping [true, false] whether the sample should play in a loop.
-    # 
-    # @see #play_pan
-    def play(volume=1, speed=1, looping=false); end
-    
-    ##
-    # Plays the sample with panning.
-    # 
-    # @note Samples played with this method will not be as loud as those played with {#play}, even if `pan` is 0. This is due to a limitation in the way panning works.
-    #
-    # @return [SampleInstance]
-    # @param pan [Float] the amount of panning. 0 is centered.
-    # @param (see #play)
-    # 
-    # @see #play
-    def play_pan(pan=0, volume=1, speed=1, looping=false); end
-  end
-  
-  ##
-  # An instance of a {Gosu::Sample} playing. Can be used to stop sounds dynamically, or to check if they are finished.
-  # 
-  # It is recommended to throw away sample instances as soon as possible, as holding onto them for a long time can prevent unneeded samples being properly disposed.
-  class SampleInstance
-    attr_writer :volume
-    attr_writer :speed
-    attr_writer :pan
-    
-    ##
-    # Stops playback of this sample instance. After calling this method, the sample instance is useless and can be discarded.
-    # 
-    # Calling `stop` after the sample has finished is harmless and has no effect.
-    # 
-    # @return [void]
-    def stop; end
-    
-    ##
-    # Pauses the sample, to be resumed afterwards.
-    # 
-    # @note The sample will still occupy a playback channel while paused.
-    # 
-    # @return [void]
-    def pause; end
-    
-    ##
-    # Resumes playback of the sample.
-    # 
-    # @return [void]
-    def resume; end
-    
-    ##
-    # @return [true, false] whether the sample is paused.
-    def paused?; end
-    
-    ##
-    # @return [true, false] whether the sample is playing.
-    def playing?; end
-  end
-  
-  ##
-  # Songs are less flexible than samples in that only one can be played at a time, with no panning or speed control.
-  # 
-  # @see Gosu::Sample
-  class Song
-    class <<Song
-      ##
-      # Returns the song currently being played (even if it's paused), or nil if no song is playing.
-      # 
-      # @return [Gosu::Song?] the currently playing song.
-      attr_reader :current_song
-    end
-  
-    ##
-    # @return [Float] the song's playback volume.
-    attr_accessor :volume
-    
-    ##
-    # Loads a song from a file.
-    # 
-    # @param window [Gosu::Window]
-    # @param filename [String] the path to load the song from.
-    def initialize(window, filename); end
-    
-    ##
-    # Starts or resumes playback of the song.
-    # 
-    # If another song is currently playing, it will be stopped and this song will be set as the current song.
-    # 
-    # If `looping` is false, the current song will be set to `nil` when this song finishes.
-    # 
-    # @return [void]
-    # @param looping [true, false] whether the song should play in a loop.
-    def play(looping=false); end
-    
-    ##
-    # Pauses playback of the song. The current song is unchanged.
-    # 
-    # @return [void]
-    def pause; end
-    
-    # Returns true if this song is the current song and playback is paused.
-    # 
-    # @return [true, false] whether the song is paused.
-    def paused?; end
-    
-    ##
-    # Stops playback if this song is the current song. The current song is set to `nil`.
-    # 
-    # @return [void]
-    def stop; end
-    
-    ##
-    # @return [true, false] whether the song is playing.
-    def playing?; end
-  end
-  
-  ##
-  # A TextInput is an invisible object that handles input using the operating system's input manager.
-  #
-  # At its most basic, you only need to set {Gosu::Window#text_input} to an instance of this class. The TextInput will then handle all keyboard input until {Gosu::Window#text_input} is set to `nil`. Any text the user has typed is available through {#text}.
-  #
-  # This class is purely back-end and does not come with a GUI; drawing the input field is up to you, the programmer. The best way to do that is left completely open. TextInput only aims to provide a foundation for you to build your own GUI.
-  # 
-  # @see Gosu::Window#text_input
-  # @see file:examples/TextInput.rb
-  class TextInput
-    ##
-    # @return [String] the text that the user has typed.
-    attr_accessor :text
-    
-    ##
-    # @return [Fixnum] the position of the editing caret.
-    attr_accessor :caret_pos
-    
-    ##
-    # @return [Fixnum] the starting position of the currently selected text.
-    attr_accessor :selection_start
-    
-    ##
-    # This method is an overridable filter that is applied to all newly entered text. This allows for restricting input characters or format, automatic macro or abbreviation expansion and so on.
-    # 
-    # The return value of this method will be inserted at the current caret position.
-    # 
-    # The default implementation returns its argument unchanged.
-    # 
-    # @return [String] the string to be inserted.
-    # @param text_in [String] the text typed by the user.
-    # 
-    # @example Forcing input to all uppercase, alphanumeric characters.
-    #   input = TextInput.new
-    #   def input.filter(text_in)
-    #     text_in.upcase.gsub(/[^A-Z0-9]/, '')
-    #   end
-    def filter text_in
-      text_in
-    end
-  end
-  
-  ##
-  # Main class that serves as the foundation of a standard
-  # Gosu application. Manages initialization of all of Gosu's core components
-  # and provides timing functionality.
-  #
-  # Note that all coordinates, even the mouse position, are in client
-  # coordinates relative to the window. This means that the mouse position
-  # can be negative or larger than the window size.
-  #
-  # @note There should really only be one instance of this class at a time. This may or may not change later, but for right now, having two or more windows and loading samples or songs on both of them will result in an exception.
-  class Window
-    ##
-    # @return [String] the window's caption, usually dispalyed in the title bar.
-    attr_accessor :caption
-    
-    ##
-    # @return [Fixnum] the mouse pointer's window-based X coordinate.
-    attr_accessor :mouse_x
-    
-    ##
-    # @return [Fixnum] the mouse pointer's window-based Y coordinate.
-    attr_accessor :mouse_y
-    
-    ##
-    # The currently active {TextInput}. If not nil, all keyboard input will be handled by this object.
-    # 
-    # @return [TextInput?] the currently active text input.
-    attr_accessor :text_input
-    
-    ##
-    # The window's width, in pixels. This only counts the drawable area and does not include any borders or decorations added by the window manager.
-    # 
-    # @return [Fixnum] the window's width, in pixels.
-    attr_reader :width
-    
-    ##
-    # The window's height, in pixels. This only counts the drawable area and does not include any borders or decorations added by the window manager.
-    # 
-    # @return [Fixnum] the window's height, in pixels.
-    attr_reader :height
-    
-    ##
-    # @return [true, false] whether this is a full-screen window.
-    attr_reader :fullscreen?
-    
-    ##
-    # @return [Float] the interval between calls to {#update}, in milliseconds.
-    attr_reader :update_interval
-    
-    ##
-    # Creates a new window with the requested size.
-    # 
-    # @note The actual window may be smaller if the requested size is too large for the current display resolution; in that case, Gosu will automatically scale all coordinates to transparently emulate a larger window. No need to thank us.
-    # 
-    # @param width [Fixnum] the desired window width.
-    # @param height [Fixnum] the desired window height.
-    # @param fullscreen [true, false] whether to create a full-screen window.
-    # @param update_interval [Float] the interval between calls to {#update}, in milliseconsd. For the default value of 16.666666, the game will attempt to run at approximately 60 FPS, which is ideal on standard 60 Hz TFT screens.
-    def initialize(width, height, fullscreen, update_interval=16.666666); end
-    
-    ##
-    # Enters a modal loop where the Window is visible on screen and receives calls to draw, update etc.
-    # 
-    # @return [void]
-    def show; end
-    
-    ##
-    # Tells the window to end the current run loop as soon as possible. Calling this method will not prevent execution of lines after it.
-    # 
-    # @return [void]
-    def close; end 
-    
-    # @!group Callbacks
-    
-    ##
-    # This method is called once every {#update_interval} milliseconds while the window is being shown. Your application's main logic should go here.
-    # 
-    # @return [void]
-    def update; end
-    
-    ##
-    # This method is called after every update and whenever the OS wants the window to repaint itself. Your application's rendering code should go here.
-    # 
-    # @return [void]
-    # 
-    # @see #needs_redraw?
-    def draw; end
-    
-    ##
-    # This method can be overriden to give the game a chance to opt out of a call to {#draw}; however, the operating system can still force a redraw for any reason.
-    #
-    # @return [true, false] whether the window needs to be redrawn.
-    # 
-    # @see #draw
-    def needs_redraw?; end
-    
-    ##
-    # This method can be overriden to control the visibility of the system cursor over your window, e.g., for level editors or other situations where introducing a custom cursor or hiding the default one is not desired.
-    # 
-    # @return [true, false] whether the system cursor should be shown.
-    def needs_cursor?; end
-    
-    ##
-    # This method is called before {#update} if a button was pressed while the window had focus.
-    # 
-    # @return [void]
-    # @param id [Fixnum] the button's platform-defined id.
-    # 
-    # @see #button_up
-    # @see #button_down?
-    def button_down(id); end
-    
-    ##
-    # This method is called before {#update} if a button was released while the window had focus.
-    # 
-    # @return [void]
-    # @param (see #button_down)
-    # 
-    # @see #button_down
-    # @see #button_down?
-    def button_up(id); end
-    
-    # @!endgroup
-    
-    ##
-    # Returns whether the button `id` is currently pressed. Button states are updated once per tick, so repeated calls during the same tick will always yeild the same result.
-    # 
-    # @return [true, false] whether the button is currently pressed.
-    # @param (see #button_down)
-    # 
-    # @see #button_down
-    # @see #button_up
-    def button_down?(id); end
-    
-    # @!group Drawing primitives
-    
-    ##
-    # Draws a line from one point to another---inconsistently.
-    # 
-    # @note OpenGL lines are not reliable at all and may have a missing pixel at the start or end point. Relying on your machine's behavior can only end in tears. Recommended for debugging purposes only.
-    # 
-    # @return [void]
-    # @param x1 [Float] the X coordinate of the start point.
-    # @param y1 [Float] the Y coordinate of the start point.
-    # @param c1 [Gosu::Color] the color of the start point.
-    # @param x2 [Float] the X coordinate of the end point.
-    # @param y2 [Float] the Y coordinate of the end point.
-    # @param c2 [Gosu::Color] the color of the end point.
-    # @param z [Float] the Z-order.
-    # @param mode [:default, :additive] the blending mode to use.
-    # 
-    # @see #draw_triangle
-    # @see #draw_quad
-    # @see file:reference/Drawing_with_Colors.md Drawing with Colors
-    # @see file:reference/Z-Ordering.md
-    def draw_line(x1, y1, c1, x2, y2, c2, z=0, mode=:default); end
-    
-    ##
-    # Draws a triangle.
-    # 
-    # @return [void]
-    # @param x1 [Float] the X coordinate of the first vertex.
-    # @param y1 [Float] the Y coordinate of the first vertex.
-    # @param c1 [Gosu::Color] the color of the first vertex.
-    # @param x2 [Float] the X coordinate of the second vertex.
-    # @param y2 [Float] the Y coordinate of the second vertex.
-    # @param c2 [Gosu::Color] the color of the second vertex.
-    # @param x3 [Float] the X coordinate of the third vertex.
-    # @param y3 [Float] the Y coordinate of the third vertex.
-    # @param c3 [Gosu::Color] the color of the third vertex.
-    # @param z [Float] the Z-order.
-    # @param mode [:default, :additive] the blending mode to use.
-    #
-    # @see #draw_line
-    # @see #draw_quad
-    # @see file:reference/Drawing_with_Colors.md Drawing with Colors
-    # @see file:reference/Z-Ordering.md
-    def draw_triangle(x1, y1, c1, x2, y2, c2, x3, y3, c3, z=0, mode=:default); end
-    
-    ##
-    # Draws a quad (actually two triangles).
-    # 
-    # @return [void]
-    # @param x1 [Float] the X coordinate of the first vertex.
-    # @param y1 [Float] the Y coordinate of the first vertex.
-    # @param c1 [Gosu::Color] the color of the first vertex.
-    # @param x2 [Float] the X coordinate of the second vertex.
-    # @param y2 [Float] the Y coordinate of the second vertex.
-    # @param c2 [Gosu::Color] the color of the second vertex.
-    # @param x3 [Float] the X coordinate of the third vertex.
-    # @param y3 [Float] the Y coordinate of the third vertex.
-    # @param c3 [Gosu::Color] the color of the third vertex.
-    # @param x4 [Float] the X coordinate of the fourth vertex.
-    # @param y4 [Float] the Y coordinate of the fourth vertex.
-    # @param c4 [Gosu::Color] the color of the fourth vertex.
-    # @param z [Float] the Z-order.
-    # @param mode [:default, :additive] the blending mode to use.
-    #
-    # @see #draw_line
-    # @see #draw_triangle
-    # @see file:reference/Drawing_with_Colors.md Drawing with Colors
-    # @see file:reference/Order_of_Corners.md Order of Corners
-    # @see file:reference/Z-Ordering.md
-    def draw_quad(x1, y1, c1, x2, y2, c2, x3, y3, c3, x4, y4, c4, z=0, mode=:default); end
-    
-    # @!endgroup
-    # @!group Manipulating the drawing context
-    
-    ##
-    # Flushes all drawing operations to OpenGL so that Z-ordering can start anew. This is useful for drawing multiple layers that may not have knowledge of each other's Z-ordering, e.g., drawing a HUD on top of the game world or ensuring that a custom cursor is always drawn above everything else.
-    # 
-    # @return [void]
-    def flush; end
-    
-    ##
-    # Runs the block in a clean OpenGL environment.
-    # 
-    # If a Z-order is given, the block will be scheduled to run between Gosu drawing operations as normal; otherwise, all prior drawing operations will be flushed and the block will be executed immediately.
-    # 
-    # @note Gosu does not provide access to the underlying OpenGL APIs. A gem like ruby-opengl is required to use custom OpenGL drawing code.
-    #
-    # @note Gosu rendering functions MUST NOT be used within the block, and {#gl} MUST be used only within the call tree of {#draw}.
-    # 
-    # @return [void]
-    # @param z [Float] the Z-order.
-    # @yield OpenGL code.
-    # 
-    # @see #draw
-    # @see file:reference/Z-Ordering
-    # @see file:examples/OpenGLIntegration.rb
-    def gl(z=nil); end
-    
-    ##
-    # Masks the drawing area inside the block.
-    # 
-    # @return [void]
-    # @param x [Float] the X coordinate of the top left corner,.
-    # @param y [Float] the Y coordinate of the top left corner.
-    # @param w [Float] the width of the clipping area.
-    # @param h [Float] the height of the clipping area.
-    # @yield rendering code.
-    # 
-    # @see #draw
-    def clip_to(x, y, w, h); end
-    
-    ##
-    # Records all drawing operatons inside the block as a reusable "image". This method can be used to speed rendering of multiple static images, e.g., a fixed tile map.
-    # 
-    # @note Because the returned object is not a true image---it's implemented using vertex buffers and is not backed by a texture---there are restrictions on how it can be used.
-    #
-    # @note The width and height of the returned object will be the same values you passed to {#record}, regardless of the area you draw on. It is important to pass accurate values if you plan on using {Gosu::Image#draw_as_quad} or {Gosu::Image#draw_rot} with the result later.
-    #
-    # @return [Gosu::Image] the recorded drawing operations.
-    # @param width [Float] the width of the recorded image.
-    # @param height [Float] the height of the recorded image.
-    # @yield rendering code.
-    # 
-    # @see #draw
-    # @see Gosu::Image
-    def record(width, height); end
-    
-    ##
-    # Rotates all drawing operatons inside the block.
-    # 
-    # @return [void]
-    # @param angle [Float] the rotation angle.
-    # @param around_x [Float] the X coorinate of the rotation origin.
-    # @param around_y [Float] the Y coordinate of the rotation origin.
-    # @yield rendering code.
-    # 
-    # @see #draw
-    # @see #scale
-    # @see #translate
-    # @see #transform
-    def rotate(angle, around_x=0, around_y=0); end
-    
-    ##
-    # Scales all drawing operations inside the block.
-    # 
-    # @overload scale(factor_x, factor_y = factor_x) { ... }
-    # @overload scale(factor_x, factor_y, around_x, around_y) { ... }
-    # 
-    # @return [void]
-    # @param factor_x [Float] the horizontal scaling factor.
-    # @param factor_y [Float] the vertical scaling factor.
-    # @param around_x [Float] the X coordinate of the scaling origin.
-    # @param around_y [Float] the Y coordinate of the scaling origin.
-    # @yield rendering code.
-    # 
-    # @see #draw
-    # @see #rotate
-    # @see #translate
-    # @see #transform
-    def scale(factor_x, factor_y, around_x, around_y); end
-    
-    ##
-    # Offsets all drawing operations inside the block.
-    # 
-    # @return [void]
-    # @param x [Float] the X offset.
-    # @param y [Float] the Y offset.
-    # @yield rendering code.
-    # 
-    # @see #draw
-    # @see #rotate
-    # @see #scale
-    # @see #transform
-    def translate(x, y); end
-    
-    ##
-    # Applies a free-form matrix transformation to everything drawn in the block.
-    # 
-    # @return [void]
-    # @param m0 [Float]
-    # @param m1 [Float]
-    # @param m2 [Float]
-    # @param m3 [Float]
-    # @param m4 [Float]
-    # @param m5 [Float]
-    # @param m6 [Float]
-    # @param m7 [Float]
-    # @param m8 [Float]
-    # @param m9 [Float]
-    # @param m10 [Float]
-    # @param m11 [Float]
-    # @param m12 [Float]
-    # @param m13 [Float]
-    # @param m14 [Float]
-    # @param m15 [Float]
-    # @yield rendering code.
-    # 
-    # @see #draw
-    # @see #rotate
-    # @see #scale
-    # @see #translate
-    def transform(m0, m1, m2, m3, m4, m5, m6, m7, m8, m9, m10, m11, m12, m13, m14, m15); end
-    
-    # @!endgroup
-    
-    ##
-    # Returns the character a button usually produces, if any.
-    # 
-    # @note For real text input, look at {TextInput} instead.
-    # 
-    # @return [String?] the character the button usually produces.
-    # @param id [Fixnum] the button's platform-defined id.
-    # 
-    # @see char_to_button_id
-    # @see #text_input
-    # @see TextInput
-    def self.button_id_to_char(id); end
-    
-    ##
-    # Returns the button that usually produces a character, if any.
-    # 
-    # @return [Fixnum?] the button that usually produces the character.
-    # @param char [String] the character to query.
-    # 
-    # @see button_id_to_char
-    # @see #text_input
-    # @see TextInput
-    def self.char_to_button_id(char); end
-    
-    ##
-    # @deprecated Use {#mouse_x=} and {#mouse_y=} instead.
-    def set_mouse_position(x, y); end
-  end
-  
-  ##
-  # Holds information about the underlying OpenGL texture and UV coordinates of an image.
-  #
-  # Can be retrieved from some images to use them in OpenGL operations.
-  #
-  # @see Gosu::Image#gl_tex_info
-  # @see file:examples/OpenGLIntegration.rb
-  class GLTexInfo
-    ##
-    # @return [Fixnum] OpenGL texture id
-    attr_reader :tex_name
-    
-    ##
-    # @return [Float] the U coordinate of the left edge of the image.
-    attr_reader :left
-    
-    ##
-    # @return [Float] the U coordinate of the right edge of the image.
-    attr_reader :right
-    
-    ##
-    # @return [Float] the V coordinate of the top edge of the image.
-    attr_reader :top
-    
-    ##
-    # @return [Float] the V coordinate of the bottom edge of the image.
-    attr_reader :bottom
-  end
-
-  class << self
-    ##
-    # @return [Float] a random number in the range (min...max).
-    # @param min [Float] the minimum value, inclusive.
-    # @param max [Float] the maximum value, exclusive.
-    def random(min, max); end
-
-    ##
-    # @return [Float] the X component of a vector of angle theta and magnitude r, or the vertical distance covered by moving r pixels in the direction given by theta.
-    # @param theta [Float]
-    # @param r [Float]
-    def offset_x(theta, r); end
-
-    ##
-    # @return [Float] the Y component of a vector of angle theta and magnitude r, or the vertical distance covered by moving r pixels in the direction given by theta.
-    # @param theta [Float]
-    # @param r [Float]
-    def offset_y(theta, r); end
-
-    ##
-    # @return [Float] the angular distance from (x1, y1) to (x1, y2) in degrees, where 0.0 is up. Returns 0 if both points are equal.
-    # @param x1 [Float]
-    # @param y1 [Float]
-    # @param x2 [Float]
-    # @param y2 [Float]
-    def angle(x1, y1, x2, y2); end
-
-    ##
-    # @return [Float] the shortest angular distance from angle1 to angle2. This can be negative if counter-clockwise rotation would yield a shorter distance.
-    # @param angle1 [Float]
-    # @param angle2 [Float]
-    def angle_diff(angle1, angle2); end
-
-    ##
-    # @return [Float] the distance from (x1, y1) to (x2, y2).
-    # @param x1 [Float]
-    # @param y1 [Float]
-    # @param x2 [Float]
-    # @param y2 [Float]
-    def distance(x1, y1, x2, y2); end
-
-    ##
-    # @note For long-running games, this counter will eventually wrap around to 0 again.
-    # 
-    # @return [Fixnum] the number of milliseconds elapsed.
-    def milliseconds(); end
-
-    ##
-    # @return [Fixnum] the current framerate, in frames per second.
-    def fps(); end
-
-    # @return [String] the name of a neutral font that is available on the current platform.
-    # 
-    # @see Gosu::Font
-    # @see Gosu::Image#from_text
-    def default_font_name(); end
-
-    ##
-    # @return [Fixnum] the width, in pixels, of the user's primary screen.
-    def screen_width(); end
-
-    # @return [Fixnum] the height, in pixels, of the user's primary screen.
-    def screen_height(); end
-
-    ##
-    # Returns the language code for the user's preferred language. Expect return values such as 'en_US', 'de_DE.UTF-8', 'ja', 'zh-Hans', etc. You can rely only on the first two letters being a common language abbreviation.
-    # 
-    # @return [String] the user's preferred language.
-    def language(); end
-  end
-end
-
-##
-# Small additions to Numeric to make it easier to integrate Gosu with
-# libraries that use radians, like Chipmunk.
-class ::Numeric
-  ##
-  # Converts radians to a Gosu-compatible angle using the formula <tt>self * 180.0 / Math::PI + 90</tt>.
-  # 
-  # @return [Float] degrees.
-  def radians_to_gosu(); end
-
-  ##
-  # Converts a Gosu-compatible angle to radians using the formula <tt>(self - 90) * Math::PI / 180.0</tt>.
-  # 
-  # @return [Float] radians.
-  def gosu_to_radians(); end
-  
-  ##
-  # Converts degrees to radians.
-  # 
-  # @return [Float] radians.
-  def degrees_to_radians(); end
-  
-  ##
-  # Converts radians to degrees.
-  # 
-  # @return [Float] degrees.
-  def radians_to_degrees(); end
-end