googlecloud 0.0.4 → 0.0.6

data/packages/gsutil/boto/docs/source/ref/sts.rst

@@ -0,0 +1,25 @@
+.. ref-sts
+
+===
+STS
+===
+
+boto.sts
+--------
+
+.. automodule:: boto.sts
+   :members:   
+   :undoc-members:
+
+.. autoclass:: boto.sts.STSConnection
+   :members:
+   :undoc-members:
+
+boto.sts.credentials
+--------------------
+
+.. automodule:: boto.sts.credentials
+   :members:   
+   :undoc-members:
+   
+

data/packages/gsutil/boto/docs/source/ref/swf.rst

@@ -0,0 +1,22 @@
+.. ref-swf
+
+===
+SWF
+===
+
+boto.swf
+--------
+
+.. automodule:: boto.swf
+   :members:   
+   :undoc-members:
+
+boto.swf.layer1
+--------------------
+
+.. automodule:: boto.swf.layer1
+   :members:
+   :undoc-members:
+
+
+

data/packages/gsutil/boto/docs/source/ref/vpc.rst

@@ -0,0 +1,54 @@
+.. _ref-vpc:
+
+====
+VPC
+====
+
+boto.vpc
+--------
+
+.. automodule:: boto.vpc
+   :members:   
+   :undoc-members:
+
+boto.vpc.customergateway
+------------------------
+
+.. automodule:: boto.vpc.customergateway
+   :members:   
+   :undoc-members:
+
+boto.vpc.dhcpoptions
+--------------------
+
+.. automodule:: boto.vpc.dhcpoptions
+   :members:   
+   :undoc-members:
+
+boto.vpc.subnet
+---------------
+
+.. automodule:: boto.vpc.subnet
+   :members:   
+   :undoc-members:
+
+boto.vpc.vpc
+------------
+
+.. automodule:: boto.vpc.vpc
+   :members:   
+   :undoc-members:
+
+boto.vpc.vpnconnection
+----------------------
+
+.. automodule:: boto.vpc.vpnconnection
+   :members:   
+   :undoc-members:
+
+boto.vpc.vpngateway
+-------------------
+
+.. automodule:: boto.vpc.vpngateway
+   :members:   
+   :undoc-members:

data/packages/gsutil/boto/docs/source/s3_tut.rst

@@ -0,0 +1,450 @@
+.. _s3_tut:
+
+======================================
+An Introduction to boto's S3 interface
+======================================
+
+This tutorial focuses on the boto interface to the Simple Storage Service
+from Amazon Web Services.  This tutorial assumes that you have already
+downloaded and installed boto.
+
+Creating a Connection
+---------------------
+The first step in accessing S3 is to create a connection to the service.
+There are two ways to do this in boto.  The first is:
+
+>>> from boto.s3.connection import S3Connection
+>>> conn = S3Connection('<aws access key>', '<aws secret key>')
+
+At this point the variable conn will point to an S3Connection object.  In
+this example, the AWS access key and AWS secret key are passed in to the
+method explicitely.  Alternatively, you can set the environment variables:
+
+* `AWS_ACCESS_KEY_ID` - Your AWS Access Key ID
+* `AWS_SECRET_ACCESS_KEY` - Your AWS Secret Access Key
+
+and then call the constructor without any arguments, like this:
+
+>>> conn = S3Connection()
+
+There is also a shortcut function in the boto package, called connect_s3
+that may provide a slightly easier means of creating a connection::
+
+    >>> import boto
+    >>> conn = boto.connect_s3()
+
+In either case, conn will point to an S3Connection object which we will
+use throughout the remainder of this tutorial.
+
+Creating a Bucket
+-----------------
+
+Once you have a connection established with S3, you will probably want to
+create a bucket.  A bucket is a container used to store key/value pairs
+in S3.  A bucket can hold an unlimited amount of data so you could potentially
+have just one bucket in S3 for all of your information.  Or, you could create
+separate buckets for different types of data.  You can figure all of that out
+later, first let's just create a bucket.  That can be accomplished like this::
+
+    >>> bucket = conn.create_bucket('mybucket')
+    Traceback (most recent call last):
+      File "<stdin>", line 1, in ?
+      File "boto/connection.py", line 285, in create_bucket
+        raise S3CreateError(response.status, response.reason)
+    boto.exception.S3CreateError: S3Error[409]: Conflict
+
+Whoa.  What happended there?  Well, the thing you have to know about
+buckets is that they are kind of like domain names.  It's one flat name
+space that everyone who uses S3 shares.  So, someone has already create
+a bucket called "mybucket" in S3 and that means no one else can grab that
+bucket name.  So, you have to come up with a name that hasn't been taken yet.
+For example, something that uses a unique string as a prefix.  Your
+AWS_ACCESS_KEY (NOT YOUR SECRET KEY!) could work but I'll leave it to
+your imagination to come up with something.  I'll just assume that you
+found an acceptable name.
+
+The create_bucket method will create the requested bucket if it does not
+exist or will return the existing bucket if it does exist.
+
+Creating a Bucket In Another Location
+-------------------------------------
+
+The example above assumes that you want to create a bucket in the
+standard US region.  However, it is possible to create buckets in
+other locations.  To do so, first import the Location object from the
+boto.s3.connection module, like this::
+
+    >>> from boto.s3.connection import Location
+    >>> print '\n'.join(i for i in dir(Location) if i[0].isupper())
+    APNortheast
+    APSoutheast
+    APSoutheast2
+    DEFAULT
+    EU
+    SAEast
+    USWest
+    USWest2
+
+As you can see, the Location object defines a number of possible locations.  By
+default, the location is the empty string which is interpreted as the US
+Classic Region, the original S3 region.  However, by specifying another
+location at the time the bucket is created, you can instruct S3 to create the
+bucket in that location.  For example::
+
+    >>> conn.create_bucket('mybucket', location=Location.EU)
+
+will create the bucket in the EU region (assuming the name is available).
+
+Storing Data
+----------------
+
+Once you have a bucket, presumably you will want to store some data
+in it.  S3 doesn't care what kind of information you store in your objects
+or what format you use to store it.  All you need is a key that is unique
+within your bucket.
+
+The Key object is used in boto to keep track of data stored in S3.  To store
+new data in S3, start by creating a new Key object::
+
+    >>> from boto.s3.key import Key
+    >>> k = Key(bucket)
+    >>> k.key = 'foobar'
+    >>> k.set_contents_from_string('This is a test of S3')
+
+The net effect of these statements is to create a new object in S3 with a
+key of "foobar" and a value of "This is a test of S3".  To validate that
+this worked, quit out of the interpreter and start it up again.  Then::
+
+    >>> import boto
+    >>> c = boto.connect_s3()
+    >>> b = c.create_bucket('mybucket') # substitute your bucket name here
+    >>> from boto.s3.key import Key
+    >>> k = Key(b)
+    >>> k.key = 'foobar'
+    >>> k.get_contents_as_string()
+    'This is a test of S3'
+
+So, we can definitely store and retrieve strings.  A more interesting
+example may be to store the contents of a local file in S3 and then retrieve
+the contents to another local file.
+
+::
+
+    >>> k = Key(b)
+    >>> k.key = 'myfile'
+    >>> k.set_contents_from_filename('foo.jpg')
+    >>> k.get_contents_to_filename('bar.jpg')
+
+There are a couple of things to note about this.  When you send data to
+S3 from a file or filename, boto will attempt to determine the correct
+mime type for that file and send it as a Content-Type header.  The boto
+package uses the standard mimetypes package in Python to do the mime type
+guessing.  The other thing to note is that boto does stream the content
+to and from S3 so you should be able to send and receive large files without
+any problem.
+
+Accessing A Bucket
+------------------
+
+Once a bucket exists, you can access it by getting the bucket. For example::
+
+    >>> mybucket = conn.get_bucket('mybucket') # Substitute in your bucket name
+    >>> mybucket.list()
+    <listing of keys in the bucket)
+
+By default, this method tries to validate the bucket's existence. You can
+override this behavior by passing ``validate=False``.::
+
+    >>> nonexistent = conn.get_bucket('i-dont-exist-at-all', validate=False)
+
+If the bucket does not exist, a ``S3ResponseError`` will commonly be thrown. If
+you'd rather not deal with any exceptions, you can use the ``lookup`` method.::
+
+    >>> nonexistent = conn.lookup('i-dont-exist-at-all')
+    >>> if nonexistent is None:
+    ...     print "No such bucket!"
+    ...
+    No such bucket!
+
+Deleting A Bucket
+-----------------
+
+Removing a bucket can be done using the ``delete_bucket`` method. For example::
+
+    >>> conn.delete_bucket('mybucket') # Substitute in your bucket name
+
+The bucket must be empty of keys or this call will fail & an exception will be
+raised. You can remove a non-empty bucket by doing something like::
+
+    >>> full_bucket = conn.get_bucket('bucket-to-delete')
+    # It's full of keys. Delete them all.
+    >>> for key in full_bucket.list():
+    ...     key.delete()
+    ...
+    # The bucket is empty now. Delete it.
+    >>> conn.delete_bucket('bucket-to-delete')
+
+.. warning::
+
+    This method can cause data loss! Be very careful when using it.
+
+    Additionally, be aware that using the above method for removing all keys
+    and deleting the bucket involves a request for each key. As such, it's not
+    particularly fast & is very chatty.
+
+Listing All Available Buckets
+-----------------------------
+In addition to accessing specific buckets via the create_bucket method
+you can also get a list of all available buckets that you have created.
+
+::
+
+    >>> rs = conn.get_all_buckets()
+
+This returns a ResultSet object (see the SQS Tutorial for more info on
+ResultSet objects).  The ResultSet can be used as a sequence or list type
+object to retrieve Bucket objects.
+
+::
+
+    >>> len(rs)
+    11
+    >>> for b in rs:
+    ... print b.name
+    ...
+    <listing of available buckets>
+    >>> b = rs[0]
+
+Setting / Getting the Access Control List for Buckets and Keys
+--------------------------------------------------------------
+The S3 service provides the ability to control access to buckets and keys
+within s3 via the Access Control List (ACL) associated with each object in
+S3.  There are two ways to set the ACL for an object:
+
+1. Create a custom ACL that grants specific rights to specific users.  At the
+   moment, the users that are specified within grants have to be registered
+   users of Amazon Web Services so this isn't as useful or as general as it
+   could be.
+
+2. Use a "canned" access control policy.  There are four canned policies
+   defined:
+
+   a. private: Owner gets FULL_CONTROL.  No one else has any access rights.
+   b. public-read: Owners gets FULL_CONTROL and the anonymous principal is granted READ access.
+   c. public-read-write: Owner gets FULL_CONTROL and the anonymous principal is granted READ and WRITE access.
+   d. authenticated-read: Owner gets FULL_CONTROL and any principal authenticated as a registered Amazon S3 user is granted READ access.
+
+To set a canned ACL for a bucket, use the set_acl method of the Bucket object.
+The argument passed to this method must be one of the four permissable
+canned policies named in the list CannedACLStrings contained in acl.py.
+For example, to make a bucket readable by anyone:
+
+>>> b.set_acl('public-read')
+
+You can also set the ACL for Key objects, either by passing an additional
+argument to the above method:
+
+>>> b.set_acl('public-read', 'foobar')
+
+where 'foobar' is the key of some object within the bucket b or you can
+call the set_acl method of the Key object:
+
+>>> k.set_acl('public-read')
+
+You can also retrieve the current ACL for a Bucket or Key object using the
+get_acl object.  This method parses the AccessControlPolicy response sent
+by S3 and creates a set of Python objects that represent the ACL.
+
+::
+
+    >>> acp = b.get_acl()
+    >>> acp
+    <boto.acl.Policy instance at 0x2e6940>
+    >>> acp.acl
+    <boto.acl.ACL instance at 0x2e69e0>
+    >>> acp.acl.grants
+    [<boto.acl.Grant instance at 0x2e6a08>]
+    >>> for grant in acp.acl.grants:
+    ...   print grant.permission, grant.display_name, grant.email_address, grant.id
+    ...
+    FULL_CONTROL <boto.user.User instance at 0x2e6a30>
+
+The Python objects representing the ACL can be found in the acl.py module
+of boto.
+
+Both the Bucket object and the Key object also provide shortcut
+methods to simplify the process of granting individuals specific
+access.  For example, if you want to grant an individual user READ
+access to a particular object in S3 you could do the following::
+
+    >>> key = b.lookup('mykeytoshare')
+    >>> key.add_email_grant('READ', 'foo@bar.com')
+
+The email address provided should be the one associated with the users
+AWS account.  There is a similar method called add_user_grant that accepts the
+canonical id of the user rather than the email address.
+
+Setting/Getting Metadata Values on Key Objects
+----------------------------------------------
+S3 allows arbitrary user metadata to be assigned to objects within a bucket.
+To take advantage of this S3 feature, you should use the set_metadata and
+get_metadata methods of the Key object to set and retrieve metadata associated
+with an S3 object.  For example::
+
+    >>> k = Key(b)
+    >>> k.key = 'has_metadata'
+    >>> k.set_metadata('meta1', 'This is the first metadata value')
+    >>> k.set_metadata('meta2', 'This is the second metadata value')
+    >>> k.set_contents_from_filename('foo.txt')
+
+This code associates two metadata key/value pairs with the Key k.  To retrieve
+those values later::
+
+    >>> k = b.get_key('has_metadata')
+    >>> k.get_metadata('meta1')
+    'This is the first metadata value'
+    >>> k.get_metadata('meta2')
+    'This is the second metadata value'
+    >>>
+
+Setting/Getting/Deleting CORS Configuration on a Bucket
+-------------------------------------------------------
+
+Cross-origin resource sharing (CORS) defines a way for client web
+applications that are loaded in one domain to interact with resources
+in a different domain. With CORS support in Amazon S3, you can build
+rich client-side web applications with Amazon S3 and selectively allow
+cross-origin access to your Amazon S3 resources.
+
+To create a CORS configuration and associate it with a bucket::
+
+    >>> from boto.s3.cors import CORSConfiguration
+    >>> cors_cfg = CORSConfiguration()
+    >>> cors_cfg.add_rule(['PUT', 'POST', 'DELETE'], 'https://www.example.com', allowed_header='*', max_age_seconds=3000, expose_header='x-amz-server-side-encryption')
+    >>> cors_cfg.add_rule('GET', '*')
+
+The above code creates a CORS configuration object with two rules.
+
+* The first rule allows cross-origin PUT, POST, and DELETE requests from
+  the https://www.example.com/ origin.  The rule also allows all headers
+  in preflight OPTIONS request through the Access-Control-Request-Headers
+  header.  In response to any preflight OPTIONS request, Amazon S3 will
+  return any requested headers.
+* The second rule allows cross-origin GET requests from all origins.
+
+To associate this configuration with a bucket::
+
+    >>> import boto
+    >>> c = boto.connect_s3()
+    >>> bucket = c.lookup('mybucket')
+    >>> bucket.set_cors(cors_cfg)
+
+To retrieve the CORS configuration associated with a bucket::
+
+    >>> cors_cfg = bucket.get_cors()
+
+And, finally, to delete all CORS configurations from a bucket::
+
+    >>> bucket.delete_cors()
+
+Transitioning Objects to Glacier
+--------------------------------
+
+You can configure objects in S3 to transition to Glacier after a period of
+time.  This is done using lifecycle policies.  A lifecycle policy can also
+specify that an object should be deleted after a period of time.  Lifecycle
+configurations are assigned to buckets and require these parameters:
+
+* The object prefix that identifies the objects you are targeting.
+* The action you want S3 to perform on the identified objects.
+* The date (or time period) when you want S3 to perform these actions.
+
+For example, given a bucket ``s3-glacier-boto-demo``, we can first retrieve the
+bucket::
+
+    >>> import boto
+    >>> c = boto.connect_s3()
+    >>> bucket = c.get_bucket('s3-glacier-boto-demo')
+
+Then we can create a lifecycle object.  In our example, we want all objects
+under ``logs/*`` to transition to Glacier 30 days after the object is created.
+
+::
+
+    >>> from boto.s3.lifecycle import Lifecycle, Transition, Rule
+    >>> to_glacier = Transition(days=30, storage_class='GLACIER')
+    >>> rule = Rule('ruleid', 'logs/', 'Enabled', transition=to_glacier)
+    >>> lifecycle = Lifecycle()
+    >>> lifecycle.append(rule)
+
+.. note::
+
+  For API docs for the lifecycle objects, see :py:mod:`boto.s3.lifecycle`
+
+We can now configure the bucket with this lifecycle policy::
+
+    >>> bucket.configure_lifecycle(lifecycle)
+True
+
+You can also retrieve the current lifecycle policy for the bucket::
+
+    >>> current = bucket.get_lifecycle_config()
+    >>> print current[0].transition
+    <Transition: in: 30 days, GLACIER>
+
+When an object transitions to Glacier, the storage class will be
+updated.  This can be seen when you **list** the objects in a bucket::
+
+    >>> for key in bucket.list():
+    ...   print key, key.storage_class
+    ...
+    <Key: s3-glacier-boto-demo,logs/testlog1.log> GLACIER
+
+You can also use the prefix argument to the ``bucket.list`` method::
+
+    >>> print list(b.list(prefix='logs/testlog1.log'))[0].storage_class
+    u'GLACIER'
+
+
+Restoring Objects from Glacier
+------------------------------
+
+Once an object has been transitioned to Glacier, you can restore the object
+back to S3.  To do so, you can use the :py:meth:`boto.s3.key.Key.restore`
+method of the key object.
+The ``restore`` method takes an integer that specifies the number of days
+to keep the object in S3.
+
+::
+
+    >>> import boto
+    >>> c = boto.connect_s3()
+    >>> bucket = c.get_bucket('s3-glacier-boto-demo')
+    >>> key = bucket.get_key('logs/testlog1.log')
+    >>> key.restore(days=5)
+
+It takes about 4 hours for a restore operation to make a copy of the archive
+available for you to access.  While the object is being restored, the
+``ongoing_restore`` attribute will be set to ``True``::
+
+
+    >>> key = bucket.get_key('logs/testlog1.log')
+    >>> print key.ongoing_restore
+    True
+
+When the restore is finished, this value will be ``False`` and the expiry
+date of the object will be non ``None``::
+
+    >>> key = bucket.get_key('logs/testlog1.log')
+    >>> print key.ongoing_restore
+    False
+    >>> print key.expiry_date
+    "Fri, 21 Dec 2012 00:00:00 GMT"
+
+
+.. note:: If there is no restore operation either in progress or completed,
+  the ``ongoing_restore`` attribute will be ``None``.
+
+Once the object is restored you can then download the contents::
+
+    >>> key.get_contents_to_filename('testlog1.log')