googleapis-common-protos-types 1.7.0 → 1.9.0

data/lib/google/type/quaternion_pb.rb

@@ -1,17 +1,34 @@
+# frozen_string_literal: true
 # Generated by the protocol buffer compiler.  DO NOT EDIT!
 # source: google/type/quaternion.proto
 
 require 'google/protobuf'
 
-Google::Protobuf::DescriptorPool.generated_pool.build do
-  add_file("google/type/quaternion.proto", :syntax => :proto3) do
-    add_message "google.type.Quaternion" do
-      optional :x, :double, 1
-      optional :y, :double, 2
-      optional :z, :double, 3
-      optional :w, :double, 4
+
+descriptor_data = "\n\x1cgoogle/type/quaternion.proto\x12\x0bgoogle.type\"8\n\nQuaternion\x12\t\n\x01x\x18\x01 \x01(\x01\x12\t\n\x01y\x18\x02 \x01(\x01\x12\t\n\x01z\x18\x03 \x01(\x01\x12\t\n\x01w\x18\x04 \x01(\x01\x42o\n\x0f\x63om.google.typeB\x0fQuaternionProtoP\x01Z@google.golang.org/genproto/googleapis/type/quaternion;quaternion\xf8\x01\x01\xa2\x02\x03GTPb\x06proto3"
+
+pool = Google::Protobuf::DescriptorPool.generated_pool
+
+begin
+  pool.add_serialized_file(descriptor_data)
+rescue TypeError => e
+  # Compatibility code: will be removed in the next major version.
+  require 'google/protobuf/descriptor_pb'
+  parsed = Google::Protobuf::FileDescriptorProto.decode(descriptor_data)
+  parsed.clear_dependency
+  serialized = parsed.class.encode(parsed)
+  file = pool.add_serialized_file(serialized)
+  warn "Warning: Protobuf detected an import path issue while loading generated file #{__FILE__}"
+  imports = [
+  ]
+  imports.each do |type_name, expected_filename|
+    import_file = pool.lookup(type_name).file_descriptor
+    if import_file.name != expected_filename
+      warn "- #{file.name} imports #{expected_filename}, but that import was loaded as #{import_file.name}"
     end
   end
+  warn "Each proto file must use a consistent fully-qualified name."
+  warn "This will become an error in the next major version."
 end
 
 module Google
@@ -19,3 +36,100 @@ module Google
     Quaternion = ::Google::Protobuf::DescriptorPool.generated_pool.lookup("google.type.Quaternion").msgclass
   end
 end
+
+#### Source proto file: google/type/quaternion.proto ####
+#
+# // Copyright 2021 Google LLC
+# //
+# // Licensed under the Apache License, Version 2.0 (the "License");
+# // you may not use this file except in compliance with the License.
+# // You may obtain a copy of the License at
+# //
+# //     http://www.apache.org/licenses/LICENSE-2.0
+# //
+# // Unless required by applicable law or agreed to in writing, software
+# // distributed under the License is distributed on an "AS IS" BASIS,
+# // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# // See the License for the specific language governing permissions and
+# // limitations under the License.
+#
+# syntax = "proto3";
+#
+# package google.type;
+#
+# option cc_enable_arenas = true;
+# option go_package = "google.golang.org/genproto/googleapis/type/quaternion;quaternion";
+# option java_multiple_files = true;
+# option java_outer_classname = "QuaternionProto";
+# option java_package = "com.google.type";
+# option objc_class_prefix = "GTP";
+#
+# // A quaternion is defined as the quotient of two directed lines in a
+# // three-dimensional space or equivalently as the quotient of two Euclidean
+# // vectors (https://en.wikipedia.org/wiki/Quaternion).
+# //
+# // Quaternions are often used in calculations involving three-dimensional
+# // rotations (https://en.wikipedia.org/wiki/Quaternions_and_spatial_rotation),
+# // as they provide greater mathematical robustness by avoiding the gimbal lock
+# // problems that can be encountered when using Euler angles
+# // (https://en.wikipedia.org/wiki/Gimbal_lock).
+# //
+# // Quaternions are generally represented in this form:
+# //
+# //     w + xi + yj + zk
+# //
+# // where x, y, z, and w are real numbers, and i, j, and k are three imaginary
+# // numbers.
+# //
+# // Our naming choice `(x, y, z, w)` comes from the desire to avoid confusion for
+# // those interested in the geometric properties of the quaternion in the 3D
+# // Cartesian space. Other texts often use alternative names or subscripts, such
+# // as `(a, b, c, d)`, `(1, i, j, k)`, or `(0, 1, 2, 3)`, which are perhaps
+# // better suited for mathematical interpretations.
+# //
+# // To avoid any confusion, as well as to maintain compatibility with a large
+# // number of software libraries, the quaternions represented using the protocol
+# // buffer below *must* follow the Hamilton convention, which defines `ij = k`
+# // (i.e. a right-handed algebra), and therefore:
+# //
+# //     i^2 = j^2 = k^2 = ijk = −1
+# //     ij = −ji = k
+# //     jk = −kj = i
+# //     ki = −ik = j
+# //
+# // Please DO NOT use this to represent quaternions that follow the JPL
+# // convention, or any of the other quaternion flavors out there.
+# //
+# // Definitions:
+# //
+# //   - Quaternion norm (or magnitude): `sqrt(x^2 + y^2 + z^2 + w^2)`.
+# //   - Unit (or normalized) quaternion: a quaternion whose norm is 1.
+# //   - Pure quaternion: a quaternion whose scalar component (`w`) is 0.
+# //   - Rotation quaternion: a unit quaternion used to represent rotation.
+# //   - Orientation quaternion: a unit quaternion used to represent orientation.
+# //
+# // A quaternion can be normalized by dividing it by its norm. The resulting
+# // quaternion maintains the same direction, but has a norm of 1, i.e. it moves
+# // on the unit sphere. This is generally necessary for rotation and orientation
+# // quaternions, to avoid rounding errors:
+# // https://en.wikipedia.org/wiki/Rotation_formalisms_in_three_dimensions
+# //
+# // Note that `(x, y, z, w)` and `(-x, -y, -z, -w)` represent the same rotation,
+# // but normalization would be even more useful, e.g. for comparison purposes, if
+# // it would produce a unique representation. It is thus recommended that `w` be
+# // kept positive, which can be achieved by changing all the signs when `w` is
+# // negative.
+# //
+# message Quaternion {
+#   // The x component.
+#   double x = 1;
+#
+#   // The y component.
+#   double y = 2;
+#
+#   // The z component.
+#   double z = 3;
+#
+#   // The scalar component.
+#   double w = 4;
+# }

data/lib/google/type/timeofday_pb.rb

@@ -1,17 +1,34 @@
+# frozen_string_literal: true
 # Generated by the protocol buffer compiler.  DO NOT EDIT!
 # source: google/type/timeofday.proto
 
 require 'google/protobuf'
 
-Google::Protobuf::DescriptorPool.generated_pool.build do
-  add_file("google/type/timeofday.proto", :syntax => :proto3) do
-    add_message "google.type.TimeOfDay" do
-      optional :hours, :int32, 1
-      optional :minutes, :int32, 2
-      optional :seconds, :int32, 3
-      optional :nanos, :int32, 4
+
+descriptor_data = "\n\x1bgoogle/type/timeofday.proto\x12\x0bgoogle.type\"K\n\tTimeOfDay\x12\r\n\x05hours\x18\x01 \x01(\x05\x12\x0f\n\x07minutes\x18\x02 \x01(\x05\x12\x0f\n\x07seconds\x18\x03 \x01(\x05\x12\r\n\x05nanos\x18\x04 \x01(\x05\x42l\n\x0f\x63om.google.typeB\x0eTimeOfDayProtoP\x01Z>google.golang.org/genproto/googleapis/type/timeofday;timeofday\xf8\x01\x01\xa2\x02\x03GTPb\x06proto3"
+
+pool = Google::Protobuf::DescriptorPool.generated_pool
+
+begin
+  pool.add_serialized_file(descriptor_data)
+rescue TypeError => e
+  # Compatibility code: will be removed in the next major version.
+  require 'google/protobuf/descriptor_pb'
+  parsed = Google::Protobuf::FileDescriptorProto.decode(descriptor_data)
+  parsed.clear_dependency
+  serialized = parsed.class.encode(parsed)
+  file = pool.add_serialized_file(serialized)
+  warn "Warning: Protobuf detected an import path issue while loading generated file #{__FILE__}"
+  imports = [
+  ]
+  imports.each do |type_name, expected_filename|
+    import_file = pool.lookup(type_name).file_descriptor
+    if import_file.name != expected_filename
+      warn "- #{file.name} imports #{expected_filename}, but that import was loaded as #{import_file.name}"
     end
   end
+  warn "Each proto file must use a consistent fully-qualified name."
+  warn "This will become an error in the next major version."
 end
 
 module Google
@@ -19,3 +36,50 @@ module Google
     TimeOfDay = ::Google::Protobuf::DescriptorPool.generated_pool.lookup("google.type.TimeOfDay").msgclass
   end
 end
+
+#### Source proto file: google/type/timeofday.proto ####
+#
+# // Copyright 2021 Google LLC
+# //
+# // Licensed under the Apache License, Version 2.0 (the "License");
+# // you may not use this file except in compliance with the License.
+# // You may obtain a copy of the License at
+# //
+# //     http://www.apache.org/licenses/LICENSE-2.0
+# //
+# // Unless required by applicable law or agreed to in writing, software
+# // distributed under the License is distributed on an "AS IS" BASIS,
+# // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# // See the License for the specific language governing permissions and
+# // limitations under the License.
+#
+# syntax = "proto3";
+#
+# package google.type;
+#
+# option cc_enable_arenas = true;
+# option go_package = "google.golang.org/genproto/googleapis/type/timeofday;timeofday";
+# option java_multiple_files = true;
+# option java_outer_classname = "TimeOfDayProto";
+# option java_package = "com.google.type";
+# option objc_class_prefix = "GTP";
+#
+# // Represents a time of day. The date and time zone are either not significant
+# // or are specified elsewhere. An API may choose to allow leap seconds. Related
+# // types are [google.type.Date][google.type.Date] and
+# // `google.protobuf.Timestamp`.
+# message TimeOfDay {
+#   // Hours of day in 24 hour format. Should be from 0 to 23. An API may choose
+#   // to allow the value "24:00:00" for scenarios like business closing time.
+#   int32 hours = 1;
+#
+#   // Minutes of hour of day. Must be from 0 to 59.
+#   int32 minutes = 2;
+#
+#   // Seconds of minutes of the time. Must normally be from 0 to 59. An API may
+#   // allow the value 60 if it allows leap-seconds.
+#   int32 seconds = 3;
+#
+#   // Fractions of seconds in nanoseconds. Must be from 0 to 999,999,999.
+#   int32 nanos = 4;
+# }

data/lib/googleapis/common/protos/types/version.rb

@@ -17,7 +17,7 @@
 module Google
   module CommonProtos
     module Types
-      VERSION = "1.7.0".freeze
+      VERSION = "1.9.0".freeze
     end
   end
 end

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: googleapis-common-protos-types
 version: !ruby/object:Gem::Version
-  version: 1.7.0
+  version: 1.9.0
 platform: ruby
 authors:
 - Google LLC
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2023-07-17 00:00:00.000000000 Z
+date: 2023-09-20 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: google-protobuf
@@ -16,14 +16,14 @@ dependencies:
     requirements:
     - - "~>"
       - !ruby/object:Gem::Version
-        version: '3.14'
+        version: '3.18'
   type: :runtime
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
     - - "~>"
       - !ruby/object:Gem::Version
-        version: '3.14'
+        version: '3.18'
 description: Common protocol buffer types used by Google APIs
 email:
 - googleapis-packages@google.com
@@ -56,6 +56,7 @@ files:
 - lib/google/api/metric_pb.rb
 - lib/google/api/monitored_resource_pb.rb
 - lib/google/api/monitoring_pb.rb
+- lib/google/api/policy_pb.rb
 - lib/google/api/quota_pb.rb
 - lib/google/api/resource_pb.rb
 - lib/google/api/routing_pb.rb
@@ -110,7 +111,7 @@ required_rubygems_version: !ruby/object:Gem::Requirement
     - !ruby/object:Gem::Version
       version: '0'
 requirements: []
-rubygems_version: 3.4.2
+rubygems_version: 3.4.19
 signing_key: 
 specification_version: 4
 summary: Common protocol buffer types used in Google APIs