google-cloud-trace 0.38.2 → 0.41.1

data/lib/google/cloud/trace/v2/doc/google/devtools/cloudtrace/v2/tracing.rb

@@ -1,33 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Devtools
-    module Cloudtrace
-      module V2
-        # The request message for the `BatchWriteSpans` method.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. The name of the project where the spans belong. The format is
-        #     `projects/[PROJECT_ID]`.
-        # @!attribute [rw] spans
-        #   @return [Array<Google::Devtools::Cloudtrace::V2::Span>]
-        #     Required. A list of new spans. The span names must not match existing
-        #     spans, or the results are undefined.
-        class BatchWriteSpansRequest; end
-      end
-    end
-  end
-end

data/lib/google/cloud/trace/v2/doc/google/protobuf/any.rb

@@ -1,131 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Protobuf
-    # `Any` contains an arbitrary serialized protocol buffer message along with a
-    # URL that describes the type of the serialized message.
-    #
-    # Protobuf library provides support to pack/unpack Any values in the form
-    # of utility functions or additional generated methods of the Any type.
-    #
-    # Example 1: Pack and unpack a message in C++.
-    #
-    #     Foo foo = ...;
-    #     Any any;
-    #     any.PackFrom(foo);
-    #     ...
-    #     if (any.UnpackTo(&foo)) {
-    #       ...
-    #     }
-    #
-    # Example 2: Pack and unpack a message in Java.
-    #
-    #     Foo foo = ...;
-    #     Any any = Any.pack(foo);
-    #     ...
-    #     if (any.is(Foo.class)) {
-    #       foo = any.unpack(Foo.class);
-    #     }
-    #
-    #  Example 3: Pack and unpack a message in Python.
-    #
-    #     foo = Foo(...)
-    #     any = Any()
-    #     any.Pack(foo)
-    #     ...
-    #     if any.Is(Foo.DESCRIPTOR):
-    #       any.Unpack(foo)
-    #       ...
-    #
-    #  Example 4: Pack and unpack a message in Go
-    #
-    #      foo := &pb.Foo{...}
-    #      any, err := ptypes.MarshalAny(foo)
-    #      ...
-    #      foo := &pb.Foo{}
-    #      if err := ptypes.UnmarshalAny(any, foo); err != nil {
-    #        ...
-    #      }
-    #
-    # The pack methods provided by protobuf library will by default use
-    # 'type.googleapis.com/full.type.name' as the type URL and the unpack
-    # methods only use the fully qualified type name after the last '/'
-    # in the type URL, for example "foo.bar.com/x/y.z" will yield type
-    # name "y.z".
-    #
-    #
-    # = JSON
-    #
-    # The JSON representation of an `Any` value uses the regular
-    # representation of the deserialized, embedded message, with an
-    # additional field `@type` which contains the type URL. Example:
-    #
-    #     package google.profile;
-    #     message Person {
-    #       string first_name = 1;
-    #       string last_name = 2;
-    #     }
-    #
-    #     {
-    #       "@type": "type.googleapis.com/google.profile.Person",
-    #       "firstName": <string>,
-    #       "lastName": <string>
-    #     }
-    #
-    # If the embedded message type is well-known and has a custom JSON
-    # representation, that representation will be embedded adding a field
-    # `value` which holds the custom JSON in addition to the `@type`
-    # field. Example (for message {Google::Protobuf::Duration}):
-    #
-    #     {
-    #       "@type": "type.googleapis.com/google.protobuf.Duration",
-    #       "value": "1.212s"
-    #     }
-    # @!attribute [rw] type_url
-    #   @return [String]
-    #     A URL/resource name that uniquely identifies the type of the serialized
-    #     protocol buffer message. This string must contain at least
-    #     one "/" character. The last segment of the URL's path must represent
-    #     the fully qualified name of the type (as in
-    #     `path/google.protobuf.Duration`). The name should be in a canonical form
-    #     (e.g., leading "." is not accepted).
-    #
-    #     In practice, teams usually precompile into the binary all types that they
-    #     expect it to use in the context of Any. However, for URLs which use the
-    #     scheme `http`, `https`, or no scheme, one can optionally set up a type
-    #     server that maps type URLs to message definitions as follows:
-    #
-    #     * If no scheme is provided, `https` is assumed.
-    #     * An HTTP GET on the URL must yield a {Google::Protobuf::Type}
-    #       value in binary format, or produce an error.
-    #     * Applications are allowed to cache lookup results based on the
-    #       URL, or have them precompiled into a binary to avoid any
-    #       lookup. Therefore, binary compatibility needs to be preserved
-    #       on changes to types. (Use versioned type names to manage
-    #       breaking changes.)
-    #
-    #     Note: this functionality is not currently available in the official
-    #     protobuf release, and it is not used for type URLs beginning with
-    #     type.googleapis.com.
-    #
-    #     Schemes other than `http`, `https` (or the empty scheme) might be
-    #     used with implementation specific semantics.
-    # @!attribute [rw] value
-    #   @return [String]
-    #     Must be a valid serialized protocol buffer of the above specified type.
-    class Any; end
-  end
-end

data/lib/google/cloud/trace/v2/doc/google/protobuf/empty.rb

@@ -1,29 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Protobuf
-    # A generic empty message that you can re-use to avoid defining duplicated
-    # empty messages in your APIs. A typical example is to use it as the request
-    # or the response type of an API method. For instance:
-    #
-    #     service Foo {
-    #       rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty);
-    #     }
-    #
-    # The JSON representation for `Empty` is empty JSON object `{}`.
-    class Empty; end
-  end
-end

data/lib/google/cloud/trace/v2/doc/google/protobuf/timestamp.rb

@@ -1,113 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Protobuf
-    # A Timestamp represents a point in time independent of any time zone or local
-    # calendar, encoded as a count of seconds and fractions of seconds at
-    # nanosecond resolution. The count is relative to an epoch at UTC midnight on
-    # January 1, 1970, in the proleptic Gregorian calendar which extends the
-    # Gregorian calendar backwards to year one.
-    #
-    # All minutes are 60 seconds long. Leap seconds are "smeared" so that no leap
-    # second table is needed for interpretation, using a [24-hour linear
-    # smear](https://developers.google.com/time/smear).
-    #
-    # The range is from 0001-01-01T00:00:00Z to 9999-12-31T23:59:59.999999999Z. By
-    # restricting to that range, we ensure that we can convert to and from [RFC
-    # 3339](https://www.ietf.org/rfc/rfc3339.txt) date strings.
-    #
-    # = Examples
-    #
-    # Example 1: Compute Timestamp from POSIX `time()`.
-    #
-    #     Timestamp timestamp;
-    #     timestamp.set_seconds(time(NULL));
-    #     timestamp.set_nanos(0);
-    #
-    # Example 2: Compute Timestamp from POSIX `gettimeofday()`.
-    #
-    #     struct timeval tv;
-    #     gettimeofday(&tv, NULL);
-    #
-    #     Timestamp timestamp;
-    #     timestamp.set_seconds(tv.tv_sec);
-    #     timestamp.set_nanos(tv.tv_usec * 1000);
-    #
-    # Example 3: Compute Timestamp from Win32 `GetSystemTimeAsFileTime()`.
-    #
-    #     FILETIME ft;
-    #     GetSystemTimeAsFileTime(&ft);
-    #     UINT64 ticks = (((UINT64)ft.dwHighDateTime) << 32) | ft.dwLowDateTime;
-    #
-    #     // A Windows tick is 100 nanoseconds. Windows epoch 1601-01-01T00:00:00Z
-    #     // is 11644473600 seconds before Unix epoch 1970-01-01T00:00:00Z.
-    #     Timestamp timestamp;
-    #     timestamp.set_seconds((INT64) ((ticks / 10000000) - 11644473600LL));
-    #     timestamp.set_nanos((INT32) ((ticks % 10000000) * 100));
-    #
-    # Example 4: Compute Timestamp from Java `System.currentTimeMillis()`.
-    #
-    #     long millis = System.currentTimeMillis();
-    #
-    #     Timestamp timestamp = Timestamp.newBuilder().setSeconds(millis / 1000)
-    #         .setNanos((int) ((millis % 1000) * 1000000)).build();
-    #
-    #
-    # Example 5: Compute Timestamp from current time in Python.
-    #
-    #     timestamp = Timestamp()
-    #     timestamp.GetCurrentTime()
-    #
-    # = JSON Mapping
-    #
-    # In JSON format, the Timestamp type is encoded as a string in the
-    # [RFC 3339](https://www.ietf.org/rfc/rfc3339.txt) format. That is, the
-    # format is "\\{year}-\\{month}-\\{day}T\\{hour}:\\{min}:\\{sec}[.\\{frac_sec}]Z"
-    # where \\{year} is always expressed using four digits while \\{month}, \\{day},
-    # \\{hour}, \\{min}, and \\{sec} are zero-padded to two digits each. The fractional
-    # seconds, which can go up to 9 digits (i.e. up to 1 nanosecond resolution),
-    # are optional. The "Z" suffix indicates the timezone ("UTC"); the timezone
-    # is required. A proto3 JSON serializer should always use UTC (as indicated by
-    # "Z") when printing the Timestamp type and a proto3 JSON parser should be
-    # able to accept both UTC and other timezones (as indicated by an offset).
-    #
-    # For example, "2017-01-15T01:30:15.01Z" encodes 15.01 seconds past
-    # 01:30 UTC on January 15, 2017.
-    #
-    # In JavaScript, one can convert a Date object to this format using the
-    # standard
-    # [toISOString()](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Date/toISOString)
-    # method. In Python, a standard `datetime.datetime` object can be converted
-    # to this format using
-    # [`strftime`](https://docs.python.org/2/library/time.html#time.strftime) with
-    # the time format spec '%Y-%m-%dT%H:%M:%S.%fZ'. Likewise, in Java, one can use
-    # the Joda Time's [`ISODateTimeFormat.dateTime()`](
-    # http://www.joda.org/joda-time/apidocs/org/joda/time/format/ISODateTimeFormat.html#dateTime%2D%2D
-    # ) to obtain a formatter capable of generating timestamps in this format.
-    # @!attribute [rw] seconds
-    #   @return [Integer]
-    #     Represents seconds of UTC time since Unix epoch
-    #     1970-01-01T00:00:00Z. Must be from 0001-01-01T00:00:00Z to
-    #     9999-12-31T23:59:59Z inclusive.
-    # @!attribute [rw] nanos
-    #   @return [Integer]
-    #     Non-negative fractions of a second at nanosecond resolution. Negative
-    #     second values with fractions must still have non-negative nanos values
-    #     that count forward in time. Must be from 0 to 999,999,999
-    #     inclusive.
-    class Timestamp; end
-  end
-end

data/lib/google/cloud/trace/v2/doc/google/protobuf/wrappers.rb

@@ -1,34 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Protobuf
-    # Wrapper message for `int32`.
-    #
-    # The JSON representation for `Int32Value` is JSON number.
-    # @!attribute [rw] value
-    #   @return [Integer]
-    #     The int32 value.
-    class Int32Value; end
-
-    # Wrapper message for `bool`.
-    #
-    # The JSON representation for `BoolValue` is JSON `true` and `false`.
-    # @!attribute [rw] value
-    #   @return [true, false]
-    #     The bool value.
-    class BoolValue; end
-  end
-end

data/lib/google/cloud/trace/v2/doc/google/rpc/status.rb

@@ -1,39 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Rpc
-    # The `Status` type defines a logical error model that is suitable for
-    # different programming environments, including REST APIs and RPC APIs. It is
-    # used by [gRPC](https://github.com/grpc). Each `Status` message contains
-    # three pieces of data: error code, error message, and error details.
-    #
-    # You can find out more about this error model and how to work with it in the
-    # [API Design Guide](https://cloud.google.com/apis/design/errors).
-    # @!attribute [rw] code
-    #   @return [Integer]
-    #     The status code, which should be an enum value of {Google::Rpc::Code}.
-    # @!attribute [rw] message
-    #   @return [String]
-    #     A developer-facing error message, which should be in English. Any
-    #     user-facing error message should be localized and sent in the
-    #     {Google::Rpc::Status#details} field, or localized by the client.
-    # @!attribute [rw] details
-    #   @return [Array<Google::Protobuf::Any>]
-    #     A list of messages that carry the error details.  There is a common set of
-    #     message types for APIs to use.
-    class Status; end
-  end
-end

data/lib/google/cloud/trace/v2/trace_service_client.rb

@@ -1,412 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# EDITING INSTRUCTIONS
-# This file was generated from the file
-# https://github.com/googleapis/googleapis/blob/master/google/devtools/cloudtrace/v2/tracing.proto,
-# and updates to that file get reflected here through a refresh process.
-# For the short term, the refresh process will only be runnable by Google
-# engineers.
-
-
-require "json"
-require "pathname"
-
-require "google/gax"
-
-require "google/devtools/cloudtrace/v2/tracing_pb"
-require "google/cloud/trace/v2/credentials"
-require "google/cloud/trace/version"
-
-module Google
-  module Cloud
-    module Trace
-      module V2
-        # This file describes an API for collecting and viewing traces and spans
-        # within a trace.  A Trace is a collection of spans corresponding to a single
-        # operation or set of operations for an application. A span is an individual
-        # timed event which forms a node of the trace tree. A single trace may
-        # contain span(s) from multiple services.
-        #
-        # @!attribute [r] trace_service_stub
-        #   @return [Google::Devtools::Cloudtrace::V2::TraceService::Stub]
-        class TraceServiceClient
-          # @private
-          attr_reader :trace_service_stub
-
-          # The default address of the service.
-          SERVICE_ADDRESS = "cloudtrace.googleapis.com".freeze
-
-          # The default port of the service.
-          DEFAULT_SERVICE_PORT = 443
-
-          # The default set of gRPC interceptors.
-          GRPC_INTERCEPTORS = []
-
-          DEFAULT_TIMEOUT = 30
-
-          # The scopes needed to make gRPC calls to all of the methods defined in
-          # this service.
-          ALL_SCOPES = [
-            "https://www.googleapis.com/auth/cloud-platform",
-            "https://www.googleapis.com/auth/trace.append"
-          ].freeze
-
-
-          PROJECT_PATH_TEMPLATE = Google::Gax::PathTemplate.new(
-            "projects/{project}"
-          )
-
-          private_constant :PROJECT_PATH_TEMPLATE
-
-          SPAN_PATH_TEMPLATE = Google::Gax::PathTemplate.new(
-            "projects/{project}/traces/{trace}/spans/{span}"
-          )
-
-          private_constant :SPAN_PATH_TEMPLATE
-
-          # Returns a fully-qualified project resource name string.
-          # @param project [String]
-          # @return [String]
-          def self.project_path project
-            PROJECT_PATH_TEMPLATE.render(
-              :"project" => project
-            )
-          end
-
-          # Returns a fully-qualified span resource name string.
-          # @param project [String]
-          # @param trace [String]
-          # @param span [String]
-          # @return [String]
-          def self.span_path project, trace, span
-            SPAN_PATH_TEMPLATE.render(
-              :"project" => project,
-              :"trace" => trace,
-              :"span" => span
-            )
-          end
-
-          # @param credentials [Google::Auth::Credentials, String, Hash, GRPC::Core::Channel, GRPC::Core::ChannelCredentials, Proc]
-          #   Provides the means for authenticating requests made by the client. This parameter can
-          #   be many types.
-          #   A `Google::Auth::Credentials` uses a the properties of its represented keyfile for
-          #   authenticating requests made by this client.
-          #   A `String` will be treated as the path to the keyfile to be used for the construction of
-          #   credentials for this client.
-          #   A `Hash` will be treated as the contents of a keyfile to be used for the construction of
-          #   credentials for this client.
-          #   A `GRPC::Core::Channel` will be used to make calls through.
-          #   A `GRPC::Core::ChannelCredentials` for the setting up the RPC client. The channel credentials
-          #   should already be composed with a `GRPC::Core::CallCredentials` object.
-          #   A `Proc` will be used as an updater_proc for the Grpc channel. The proc transforms the
-          #   metadata for requests, generally, to give OAuth credentials.
-          # @param scopes [Array<String>]
-          #   The OAuth scopes for this service. This parameter is ignored if
-          #   an updater_proc is supplied.
-          # @param client_config [Hash]
-          #   A Hash for call options for each method. See
-          #   Google::Gax#construct_settings for the structure of
-          #   this data. Falls back to the default config if not specified
-          #   or the specified config is missing data points.
-          # @param timeout [Numeric]
-          #   The default timeout, in seconds, for calls made through this client.
-          # @param metadata [Hash]
-          #   Default metadata to be sent with each request. This can be overridden on a per call basis.
-          # @param service_address [String]
-          #   Override for the service hostname, or `nil` to leave as the default.
-          # @param service_port [Integer]
-          #   Override for the service port, or `nil` to leave as the default.
-          # @param exception_transformer [Proc]
-          #   An optional proc that intercepts any exceptions raised during an API call to inject
-          #   custom error handling.
-          def initialize \
-              credentials: nil,
-              scopes: ALL_SCOPES,
-              client_config: {},
-              timeout: DEFAULT_TIMEOUT,
-              metadata: nil,
-              service_address: nil,
-              service_port: nil,
-              exception_transformer: nil,
-              lib_name: nil,
-              lib_version: ""
-            # These require statements are intentionally placed here to initialize
-            # the gRPC module only when it's required.
-            # See https://github.com/googleapis/toolkit/issues/446
-            require "google/gax/grpc"
-            require "google/devtools/cloudtrace/v2/tracing_services_pb"
-
-            credentials ||= Google::Cloud::Trace::V2::Credentials.default
-
-            if credentials.is_a?(String) || credentials.is_a?(Hash)
-              updater_proc = Google::Cloud::Trace::V2::Credentials.new(credentials).updater_proc
-            end
-            if credentials.is_a?(GRPC::Core::Channel)
-              channel = credentials
-            end
-            if credentials.is_a?(GRPC::Core::ChannelCredentials)
-              chan_creds = credentials
-            end
-            if credentials.is_a?(Proc)
-              updater_proc = credentials
-            end
-            if credentials.is_a?(Google::Auth::Credentials)
-              updater_proc = credentials.updater_proc
-            end
-
-            package_version = Google::Cloud::Trace::VERSION
-
-            google_api_client = "gl-ruby/#{RUBY_VERSION}"
-            google_api_client << " #{lib_name}/#{lib_version}" if lib_name
-            google_api_client << " gapic/#{package_version} gax/#{Google::Gax::VERSION}"
-            google_api_client << " grpc/#{GRPC::VERSION}"
-            google_api_client.freeze
-
-            headers = { :"x-goog-api-client" => google_api_client }
-            if credentials.respond_to?(:quota_project_id) && credentials.quota_project_id
-              headers[:"x-goog-user-project"] = credentials.quota_project_id
-            end
-            headers.merge!(metadata) unless metadata.nil?
-            client_config_file = Pathname.new(__dir__).join(
-              "trace_service_client_config.json"
-            )
-            defaults = client_config_file.open do |f|
-              Google::Gax.construct_settings(
-                "google.devtools.cloudtrace.v2.TraceService",
-                JSON.parse(f.read),
-                client_config,
-                Google::Gax::Grpc::STATUS_CODE_NAMES,
-                timeout,
-                errors: Google::Gax::Grpc::API_ERRORS,
-                metadata: headers
-              )
-            end
-
-            # Allow overriding the service path/port in subclasses.
-            service_path = service_address || self.class::SERVICE_ADDRESS
-            port = service_port || self.class::DEFAULT_SERVICE_PORT
-            interceptors = self.class::GRPC_INTERCEPTORS
-            @trace_service_stub = Google::Gax::Grpc.create_stub(
-              service_path,
-              port,
-              chan_creds: chan_creds,
-              channel: channel,
-              updater_proc: updater_proc,
-              scopes: scopes,
-              interceptors: interceptors,
-              &Google::Devtools::Cloudtrace::V2::TraceService::Stub.method(:new)
-            )
-
-            @create_span = Google::Gax.create_api_call(
-              @trace_service_stub.method(:create_span),
-              defaults["create_span"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'name' => request.name}
-              end
-            )
-            @batch_write_spans = Google::Gax.create_api_call(
-              @trace_service_stub.method(:batch_write_spans),
-              defaults["batch_write_spans"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'name' => request.name}
-              end
-            )
-          end
-
-          # Service calls
-
-          # Creates a new span.
-          #
-          # @param name [String]
-          #   The resource name of the span in the following format:
-          #
-          #       projects/[PROJECT_ID]/traces/[TRACE_ID]/spans/[SPAN_ID]
-          #
-          #   [TRACE_ID] is a unique identifier for a trace within a project;
-          #   it is a 32-character hexadecimal encoding of a 16-byte array.
-          #
-          #   [SPAN_ID] is a unique identifier for a span within a trace; it
-          #   is a 16-character hexadecimal encoding of an 8-byte array.
-          # @param span_id [String]
-          #   The [SPAN_ID] portion of the span's resource name.
-          # @param display_name [Google::Devtools::Cloudtrace::V2::TruncatableString | Hash]
-          #   A description of the span's operation (up to 128 bytes).
-          #   Stackdriver Trace displays the description in the
-          #   Google Cloud Platform Console.
-          #   For example, the display name can be a qualified method name or a file name
-          #   and a line number where the operation is called. A best practice is to use
-          #   the same display name within an application and at the same call point.
-          #   This makes it easier to correlate spans in different traces.
-          #   A hash of the same form as `Google::Devtools::Cloudtrace::V2::TruncatableString`
-          #   can also be provided.
-          # @param start_time [Google::Protobuf::Timestamp | Hash]
-          #   The start time of the span. On the client side, this is the time kept by
-          #   the local machine where the span execution starts. On the server side, this
-          #   is the time when the server's application handler starts running.
-          #   A hash of the same form as `Google::Protobuf::Timestamp`
-          #   can also be provided.
-          # @param end_time [Google::Protobuf::Timestamp | Hash]
-          #   The end time of the span. On the client side, this is the time kept by
-          #   the local machine where the span execution ends. On the server side, this
-          #   is the time when the server application handler stops running.
-          #   A hash of the same form as `Google::Protobuf::Timestamp`
-          #   can also be provided.
-          # @param parent_span_id [String]
-          #   The [SPAN_ID] of this span's parent span. If this is a root span,
-          #   then this field must be empty.
-          # @param attributes [Google::Devtools::Cloudtrace::V2::Span::Attributes | Hash]
-          #   A set of attributes on the span. You can have up to 32 attributes per
-          #   span.
-          #   A hash of the same form as `Google::Devtools::Cloudtrace::V2::Span::Attributes`
-          #   can also be provided.
-          # @param stack_trace [Google::Devtools::Cloudtrace::V2::StackTrace | Hash]
-          #   Stack trace captured at the start of the span.
-          #   A hash of the same form as `Google::Devtools::Cloudtrace::V2::StackTrace`
-          #   can also be provided.
-          # @param time_events [Google::Devtools::Cloudtrace::V2::Span::TimeEvents | Hash]
-          #   A set of time events. You can have up to 32 annotations and 128 message
-          #   events per span.
-          #   A hash of the same form as `Google::Devtools::Cloudtrace::V2::Span::TimeEvents`
-          #   can also be provided.
-          # @param links [Google::Devtools::Cloudtrace::V2::Span::Links | Hash]
-          #   Links associated with the span. You can have up to 128 links per Span.
-          #   A hash of the same form as `Google::Devtools::Cloudtrace::V2::Span::Links`
-          #   can also be provided.
-          # @param status [Google::Rpc::Status | Hash]
-          #   Optional. The final status for this span.
-          #   A hash of the same form as `Google::Rpc::Status`
-          #   can also be provided.
-          # @param same_process_as_parent_span [Google::Protobuf::BoolValue | Hash]
-          #   Optional. Set this parameter to indicate whether this span is in
-          #   the same process as its parent. If you do not set this parameter,
-          #   Stackdriver Trace is unable to take advantage of this helpful
-          #   information.
-          #   A hash of the same form as `Google::Protobuf::BoolValue`
-          #   can also be provided.
-          # @param child_span_count [Google::Protobuf::Int32Value | Hash]
-          #   Optional. The number of child spans that were generated while this span
-          #   was active. If set, allows implementation to detect missing child spans.
-          #   A hash of the same form as `Google::Protobuf::Int32Value`
-          #   can also be provided.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result [Google::Devtools::Cloudtrace::V2::Span]
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @return [Google::Devtools::Cloudtrace::V2::Span]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/trace"
-          #
-          #   trace_client = Google::Cloud::Trace.new(version: :v2)
-          #   formatted_name = Google::Cloud::Trace::V2::TraceServiceClient.span_path("[PROJECT]", "[TRACE]", "[SPAN]")
-          #
-          #   # TODO: Initialize `span_id`:
-          #   span_id = ''
-          #
-          #   # TODO: Initialize `display_name`:
-          #   display_name = {}
-          #
-          #   # TODO: Initialize `start_time`:
-          #   start_time = {}
-          #
-          #   # TODO: Initialize `end_time`:
-          #   end_time = {}
-          #   response = trace_client.create_span(formatted_name, span_id, display_name, start_time, end_time)
-
-          def create_span \
-              name,
-              span_id,
-              display_name,
-              start_time,
-              end_time,
-              parent_span_id: nil,
-              attributes: nil,
-              stack_trace: nil,
-              time_events: nil,
-              links: nil,
-              status: nil,
-              same_process_as_parent_span: nil,
-              child_span_count: nil,
-              options: nil,
-              &block
-            req = {
-              name: name,
-              span_id: span_id,
-              display_name: display_name,
-              start_time: start_time,
-              end_time: end_time,
-              parent_span_id: parent_span_id,
-              attributes: attributes,
-              stack_trace: stack_trace,
-              time_events: time_events,
-              links: links,
-              status: status,
-              same_process_as_parent_span: same_process_as_parent_span,
-              child_span_count: child_span_count
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Devtools::Cloudtrace::V2::Span)
-            @create_span.call(req, options, &block)
-          end
-
-          # Sends new spans to new or existing traces. You cannot update
-          # existing spans.
-          #
-          # @param name [String]
-          #   Required. The name of the project where the spans belong. The format is
-          #   `projects/[PROJECT_ID]`.
-          # @param spans [Array<Google::Devtools::Cloudtrace::V2::Span | Hash>]
-          #   Required. A list of new spans. The span names must not match existing
-          #   spans, or the results are undefined.
-          #   A hash of the same form as `Google::Devtools::Cloudtrace::V2::Span`
-          #   can also be provided.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result []
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/trace"
-          #
-          #   trace_client = Google::Cloud::Trace.new(version: :v2)
-          #   formatted_name = Google::Cloud::Trace::V2::TraceServiceClient.project_path("[PROJECT]")
-          #
-          #   # TODO: Initialize `spans`:
-          #   spans = []
-          #   trace_client.batch_write_spans(formatted_name, spans)
-
-          def batch_write_spans \
-              name,
-              spans,
-              options: nil,
-              &block
-            req = {
-              name: name,
-              spans: spans
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Devtools::Cloudtrace::V2::BatchWriteSpansRequest)
-            @batch_write_spans.call(req, options, &block)
-            nil
-          end
-        end
-      end
-    end
-  end
-end