google-cloud-tasks 1.5.1 → 2.1.3

data/lib/google/cloud/tasks/v2/doc/google/cloud/tasks/v2/target.rb

@@ -1,414 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Cloud
-    module Tasks
-      module V2
-        # HTTP request.
-        #
-        # The task will be pushed to the worker as an HTTP request. If the worker
-        # or the redirected worker acknowledges the task by returning a successful HTTP
-        # response code ([`200` - `299`]), the task will be removed from the queue. If
-        # any other HTTP response code is returned or no response is received, the
-        # task will be retried according to the following:
-        #
-        # * User-specified throttling: {Google::Cloud::Tasks::V2::Queue#retry_config retry configuration},
-        #   {Google::Cloud::Tasks::V2::Queue#rate_limits rate limits}, and the {Google::Cloud::Tasks::V2::Queue#state queue's state}.
-        #
-        # * System throttling: To prevent the worker from overloading, Cloud Tasks may
-        #   temporarily reduce the queue's effective rate. User-specified settings
-        #   will not be changed.
-        #
-        #  System throttling happens because:
-        #
-        # * Cloud Tasks backs off on all errors. Normally the backoff specified in
-        #   {Google::Cloud::Tasks::V2::Queue#rate_limits rate limits} will be used. But if the worker returns
-        #   `429` (Too Many Requests), `503` (Service Unavailable), or the rate of
-        #   errors is high, Cloud Tasks will use a higher backoff rate. The retry
-        #   specified in the `Retry-After` HTTP response header is considered.
-        #
-        #   * To prevent traffic spikes and to smooth sudden increases in traffic,
-        #     dispatches ramp up slowly when the queue is newly created or idle and
-        #     if large numbers of tasks suddenly become available to dispatch (due to
-        #     spikes in create task rates, the queue being unpaused, or many tasks
-        #     that are scheduled at the same time).
-        # @!attribute [rw] url
-        #   @return [String]
-        #     Required. The full url path that the request will be sent to.
-        #
-        #     This string must begin with either "http://" or "https://". Some examples
-        #     are: `http://acme.com` and `https://acme.com/sales:8080`. Cloud Tasks will
-        #     encode some characters for safety and compatibility. The maximum allowed
-        #     URL length is 2083 characters after encoding.
-        #
-        #     The `Location` header response from a redirect response [`300` - `399`]
-        #     may be followed. The redirect is not counted as a separate attempt.
-        # @!attribute [rw] http_method
-        #   @return [Google::Cloud::Tasks::V2::HttpMethod]
-        #     The HTTP method to use for the request. The default is POST.
-        # @!attribute [rw] headers
-        #   @return [Hash{String => String}]
-        #     HTTP request headers.
-        #
-        #     This map contains the header field names and values.
-        #     Headers can be set when the
-        #     {Google::Cloud::Tasks::V2beta3::CloudTasks::CreateTask task is created}.
-        #
-        #     These headers represent a subset of the headers that will accompany the
-        #     task's HTTP request. Some HTTP request headers will be ignored or replaced.
-        #
-        #     A partial list of headers that will be ignored or replaced is:
-        #
-        #     * Host: This will be computed by Cloud Tasks and derived from
-        #       {Google::Cloud::Tasks::V2::HttpRequest#url HttpRequest#url}.
-        #     * Content-Length: This will be computed by Cloud Tasks.
-        #     * User-Agent: This will be set to `"Google-Cloud-Tasks"`.
-        #     * X-Google-*: Google use only.
-        #     * X-AppEngine-*: Google use only.
-        #
-        #     `Content-Type` won't be set by Cloud Tasks. You can explicitly set
-        #     `Content-Type` to a media type when the
-        #      {Google::Cloud::Tasks::V2beta3::CloudTasks::CreateTask task is created}.
-        #      For example, `Content-Type` can be set to `"application/octet-stream"` or
-        #      `"application/json"`.
-        #
-        #     Headers which can have multiple values (according to RFC2616) can be
-        #     specified using comma-separated values.
-        #
-        #     The size of the headers must be less than 80KB.
-        # @!attribute [rw] body
-        #   @return [String]
-        #     HTTP request body.
-        #
-        #     A request body is allowed only if the
-        #     {Google::Cloud::Tasks::V2::HttpRequest#http_method HTTP method} is POST, PUT, or PATCH. It is an
-        #     error to set body on a task with an incompatible {Google::Cloud::Tasks::V2::HttpMethod HttpMethod}.
-        # @!attribute [rw] oauth_token
-        #   @return [Google::Cloud::Tasks::V2::OAuthToken]
-        #     If specified, an
-        #     [OAuth token](https://developers.google.com/identity/protocols/OAuth2)
-        #     will be generated and attached as an `Authorization` header in the HTTP
-        #     request.
-        #
-        #     This type of authorization should generally only be used when calling
-        #     Google APIs hosted on *.googleapis.com.
-        # @!attribute [rw] oidc_token
-        #   @return [Google::Cloud::Tasks::V2::OidcToken]
-        #     If specified, an
-        #     [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect)
-        #     token will be generated and attached as an `Authorization` header in the
-        #     HTTP request.
-        #
-        #     This type of authorization can be used for many scenarios, including
-        #     calling Cloud Run, or endpoints where you intend to validate the token
-        #     yourself.
-        class HttpRequest; end
-
-        # App Engine HTTP request.
-        #
-        # The message defines the HTTP request that is sent to an App Engine app when
-        # the task is dispatched.
-        #
-        # Using {Google::Cloud::Tasks::V2::AppEngineHttpRequest AppEngineHttpRequest} requires
-        # [`appengine.applications.get`](https://cloud.google.com/appengine/docs/admin-api/access-control)
-        # Google IAM permission for the project
-        # and the following scope:
-        #
-        # `https://www.googleapis.com/auth/cloud-platform`
-        #
-        # The task will be delivered to the App Engine app which belongs to the same
-        # project as the queue. For more information, see
-        # [How Requests are
-        # Routed](https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed)
-        # and how routing is affected by
-        # [dispatch
-        # files](https://cloud.google.com/appengine/docs/python/config/dispatchref).
-        # Traffic is encrypted during transport and never leaves Google datacenters.
-        # Because this traffic is carried over a communication mechanism internal to
-        # Google, you cannot explicitly set the protocol (for example, HTTP or HTTPS).
-        # The request to the handler, however, will appear to have used the HTTP
-        # protocol.
-        #
-        # The {Google::Cloud::Tasks::V2::AppEngineRouting AppEngineRouting} used to construct the URL that the task is
-        # delivered to can be set at the queue-level or task-level:
-        #
-        # * If [app_engine_routing_override is set on the
-        #   queue][Queue.app_engine_routing_override], this value is used for all
-        #   tasks in the queue, no matter what the setting is for the [task-level
-        #   app_engine_routing][AppEngineHttpRequest.app_engine_routing].
-        #
-        #
-        # The `url` that the task will be sent to is:
-        #
-        # * `url =` {Google::Cloud::Tasks::V2::AppEngineRouting#host host} `+`
-        #   {Google::Cloud::Tasks::V2::AppEngineHttpRequest#relative_uri relative_uri}
-        #
-        # Tasks can be dispatched to secure app handlers, unsecure app handlers, and
-        # URIs restricted with
-        # [`login:
-        # admin`](https://cloud.google.com/appengine/docs/standard/python/config/appref).
-        # Because tasks are not run as any user, they cannot be dispatched to URIs
-        # restricted with
-        # [`login:
-        # required`](https://cloud.google.com/appengine/docs/standard/python/config/appref)
-        # Task dispatches also do not follow redirects.
-        #
-        # The task attempt has succeeded if the app's request handler returns an HTTP
-        # response code in the range [`200` - `299`]. The task attempt has failed if
-        # the app's handler returns a non-2xx response code or Cloud Tasks does
-        # not receive response before the {Google::Cloud::Tasks::V2::Task#dispatch_deadline deadline}. Failed
-        # tasks will be retried according to the
-        # {Google::Cloud::Tasks::V2::Queue#retry_config retry configuration}. `503` (Service Unavailable) is
-        # considered an App Engine system error instead of an application error and
-        # will cause Cloud Tasks' traffic congestion control to temporarily throttle
-        # the queue's dispatches. Unlike other types of task targets, a `429` (Too Many
-        # Requests) response from an app handler does not cause traffic congestion
-        # control to throttle the queue.
-        # @!attribute [rw] http_method
-        #   @return [Google::Cloud::Tasks::V2::HttpMethod]
-        #     The HTTP method to use for the request. The default is POST.
-        #
-        #     The app's request handler for the task's target URL must be able to handle
-        #     HTTP requests with this http_method, otherwise the task attempt will fail
-        #     with error code 405 (Method Not Allowed). See
-        #     [Writing a push task request
-        #     handler](https://cloud.google.com/appengine/docs/java/taskqueue/push/creating-handlers#writing_a_push_task_request_handler)
-        #     and the documentation for the request handlers in the language your app is
-        #     written in e.g.
-        #     [Python Request
-        #     Handler](https://cloud.google.com/appengine/docs/python/tools/webapp/requesthandlerclass).
-        # @!attribute [rw] app_engine_routing
-        #   @return [Google::Cloud::Tasks::V2::AppEngineRouting]
-        #     Task-level setting for App Engine routing.
-        #
-        #     * If [app_engine_routing_override is set on the
-        #       queue][Queue.app_engine_routing_override], this value is used for all
-        #       tasks in the queue, no matter what the setting is for the [task-level
-        #       app_engine_routing][AppEngineHttpRequest.app_engine_routing].
-        # @!attribute [rw] relative_uri
-        #   @return [String]
-        #     The relative URI.
-        #
-        #     The relative URI must begin with "/" and must be a valid HTTP relative URI.
-        #     It can contain a path and query string arguments.
-        #     If the relative URI is empty, then the root path "/" will be used.
-        #     No spaces are allowed, and the maximum length allowed is 2083 characters.
-        # @!attribute [rw] headers
-        #   @return [Hash{String => String}]
-        #     HTTP request headers.
-        #
-        #     This map contains the header field names and values.
-        #     Headers can be set when the
-        #     {Google::Cloud::Tasks::V2::CloudTasks::CreateTask task is created}.
-        #     Repeated headers are not supported but a header value can contain commas.
-        #
-        #     Cloud Tasks sets some headers to default values:
-        #
-        #     * `User-Agent`: By default, this header is
-        #       `"AppEngine-Google; (+http://code.google.com/appengine)"`.
-        #       This header can be modified, but Cloud Tasks will append
-        #       `"AppEngine-Google; (+http://code.google.com/appengine)"` to the
-        #       modified `User-Agent`.
-        #
-        #     If the task has a {Google::Cloud::Tasks::V2::AppEngineHttpRequest#body body}, Cloud
-        #     Tasks sets the following headers:
-        #
-        #     * `Content-Type`: By default, the `Content-Type` header is set to
-        #       `"application/octet-stream"`. The default can be overridden by explicitly
-        #       setting `Content-Type` to a particular media type when the
-        #       {Google::Cloud::Tasks::V2::CloudTasks::CreateTask task is created}.
-        #       For example, `Content-Type` can be set to `"application/json"`.
-        #     * `Content-Length`: This is computed by Cloud Tasks. This value is
-        #       output only.   It cannot be changed.
-        #
-        #     The headers below cannot be set or overridden:
-        #
-        #     * `Host`
-        #     * `X-Google-*`
-        #     * `X-AppEngine-*`
-        #
-        #     In addition, Cloud Tasks sets some headers when the task is dispatched,
-        #     such as headers containing information about the task; see
-        #     [request
-        #     headers](https://cloud.google.com/tasks/docs/creating-appengine-handlers#reading_request_headers).
-        #     These headers are set only when the task is dispatched, so they are not
-        #     visible when the task is returned in a Cloud Tasks response.
-        #
-        #     Although there is no specific limit for the maximum number of headers or
-        #     the size, there is a limit on the maximum size of the {Google::Cloud::Tasks::V2::Task Task}. For more
-        #     information, see the {Google::Cloud::Tasks::V2::CloudTasks::CreateTask CreateTask} documentation.
-        # @!attribute [rw] body
-        #   @return [String]
-        #     HTTP request body.
-        #
-        #     A request body is allowed only if the HTTP method is POST or PUT. It is
-        #     an error to set a body on a task with an incompatible {Google::Cloud::Tasks::V2::HttpMethod HttpMethod}.
-        class AppEngineHttpRequest; end
-
-        # App Engine Routing.
-        #
-        # Defines routing characteristics specific to App Engine - service, version,
-        # and instance.
-        #
-        # For more information about services, versions, and instances see
-        # [An Overview of App
-        # Engine](https://cloud.google.com/appengine/docs/python/an-overview-of-app-engine),
-        # [Microservices Architecture on Google App
-        # Engine](https://cloud.google.com/appengine/docs/python/microservices-on-app-engine),
-        # [App Engine Standard request
-        # routing](https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed),
-        # and [App Engine Flex request
-        # routing](https://cloud.google.com/appengine/docs/flexible/python/how-requests-are-routed).
-        #
-        # Using {Google::Cloud::Tasks::V2::AppEngineRouting AppEngineRouting} requires
-        # [`appengine.applications.get`](https://cloud.google.com/appengine/docs/admin-api/access-control)
-        # Google IAM permission for the project
-        # and the following scope:
-        #
-        # `https://www.googleapis.com/auth/cloud-platform`
-        # @!attribute [rw] service
-        #   @return [String]
-        #     App service.
-        #
-        #     By default, the task is sent to the service which is the default
-        #     service when the task is attempted.
-        #
-        #     For some queues or tasks which were created using the App Engine
-        #     Task Queue API, {Google::Cloud::Tasks::V2::AppEngineRouting#host host} is not parsable
-        #     into {Google::Cloud::Tasks::V2::AppEngineRouting#service service},
-        #     {Google::Cloud::Tasks::V2::AppEngineRouting#version version}, and
-        #     {Google::Cloud::Tasks::V2::AppEngineRouting#instance instance}. For example, some tasks
-        #     which were created using the App Engine SDK use a custom domain
-        #     name; custom domains are not parsed by Cloud Tasks. If
-        #     {Google::Cloud::Tasks::V2::AppEngineRouting#host host} is not parsable, then
-        #     {Google::Cloud::Tasks::V2::AppEngineRouting#service service},
-        #     {Google::Cloud::Tasks::V2::AppEngineRouting#version version}, and
-        #     {Google::Cloud::Tasks::V2::AppEngineRouting#instance instance} are the empty string.
-        # @!attribute [rw] version
-        #   @return [String]
-        #     App version.
-        #
-        #     By default, the task is sent to the version which is the default
-        #     version when the task is attempted.
-        #
-        #     For some queues or tasks which were created using the App Engine
-        #     Task Queue API, {Google::Cloud::Tasks::V2::AppEngineRouting#host host} is not parsable
-        #     into {Google::Cloud::Tasks::V2::AppEngineRouting#service service},
-        #     {Google::Cloud::Tasks::V2::AppEngineRouting#version version}, and
-        #     {Google::Cloud::Tasks::V2::AppEngineRouting#instance instance}. For example, some tasks
-        #     which were created using the App Engine SDK use a custom domain
-        #     name; custom domains are not parsed by Cloud Tasks. If
-        #     {Google::Cloud::Tasks::V2::AppEngineRouting#host host} is not parsable, then
-        #     {Google::Cloud::Tasks::V2::AppEngineRouting#service service},
-        #     {Google::Cloud::Tasks::V2::AppEngineRouting#version version}, and
-        #     {Google::Cloud::Tasks::V2::AppEngineRouting#instance instance} are the empty string.
-        # @!attribute [rw] instance
-        #   @return [String]
-        #     App instance.
-        #
-        #     By default, the task is sent to an instance which is available when
-        #     the task is attempted.
-        #
-        #     Requests can only be sent to a specific instance if
-        #     [manual scaling is used in App Engine
-        #     Standard](https://cloud.google.com/appengine/docs/python/an-overview-of-app-engine?hl=en_US#scaling_types_and_instance_classes).
-        #     App Engine Flex does not support instances. For more information, see
-        #     [App Engine Standard request
-        #     routing](https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed)
-        #     and [App Engine Flex request
-        #     routing](https://cloud.google.com/appengine/docs/flexible/python/how-requests-are-routed).
-        # @!attribute [rw] host
-        #   @return [String]
-        #     Output only. The host that the task is sent to.
-        #
-        #     The host is constructed from the domain name of the app associated with
-        #     the queue's project ID (for example <app-id>.appspot.com), and the
-        #     {Google::Cloud::Tasks::V2::AppEngineRouting#service service}, {Google::Cloud::Tasks::V2::AppEngineRouting#version version},
-        #     and {Google::Cloud::Tasks::V2::AppEngineRouting#instance instance}. Tasks which were created using
-        #     the App Engine SDK might have a custom domain name.
-        #
-        #     For more information, see
-        #     [How Requests are
-        #     Routed](https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed).
-        class AppEngineRouting; end
-
-        # Contains information needed for generating an
-        # [OAuth token](https://developers.google.com/identity/protocols/OAuth2).
-        # This type of authorization should generally only be used when calling Google
-        # APIs hosted on *.googleapis.com.
-        # @!attribute [rw] service_account_email
-        #   @return [String]
-        #     [Service account email](https://cloud.google.com/iam/docs/service-accounts)
-        #     to be used for generating OAuth token.
-        #     The service account must be within the same project as the queue. The
-        #     caller must have iam.serviceAccounts.actAs permission for the service
-        #     account.
-        # @!attribute [rw] scope
-        #   @return [String]
-        #     OAuth scope to be used for generating OAuth access token.
-        #     If not specified, "https://www.googleapis.com/auth/cloud-platform"
-        #     will be used.
-        class OAuthToken; end
-
-        # Contains information needed for generating an
-        # [OpenID Connect
-        # token](https://developers.google.com/identity/protocols/OpenIDConnect).
-        # This type of authorization can be used for many scenarios, including
-        # calling Cloud Run, or endpoints where you intend to validate the token
-        # yourself.
-        # @!attribute [rw] service_account_email
-        #   @return [String]
-        #     [Service account email](https://cloud.google.com/iam/docs/service-accounts)
-        #     to be used for generating OIDC token.
-        #     The service account must be within the same project as the queue. The
-        #     caller must have iam.serviceAccounts.actAs permission for the service
-        #     account.
-        # @!attribute [rw] audience
-        #   @return [String]
-        #     Audience to be used when generating OIDC token. If not specified, the URI
-        #     specified in target will be used.
-        class OidcToken; end
-
-        # The HTTP method used to deliver the task.
-        module HttpMethod
-          # HTTP method unspecified
-          HTTP_METHOD_UNSPECIFIED = 0
-
-          # HTTP POST
-          POST = 1
-
-          # HTTP GET
-          GET = 2
-
-          # HTTP HEAD
-          HEAD = 3
-
-          # HTTP PUT
-          PUT = 4
-
-          # HTTP DELETE
-          DELETE = 5
-
-          # HTTP PATCH
-          PATCH = 6
-
-          # HTTP OPTIONS
-          OPTIONS = 7
-        end
-      end
-    end
-  end
-end

data/lib/google/cloud/tasks/v2/doc/google/cloud/tasks/v2/task.rb

@@ -1,175 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Cloud
-    module Tasks
-      module V2
-        # A unit of scheduled work.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Optionally caller-specified in {Google::Cloud::Tasks::V2::CloudTasks::CreateTask CreateTask}.
-        #
-        #     The task name.
-        #
-        #     The task name must have the following format:
-        #     `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID`
-        #
-        #     * `PROJECT_ID` can contain letters ([A-Za-z]), numbers ([0-9]),
-        #       hyphens (-), colons (:), or periods (.).
-        #       For more information, see
-        #       [Identifying
-        #       projects](https://cloud.google.com/resource-manager/docs/creating-managing-projects#identifying_projects)
-        #     * `LOCATION_ID` is the canonical ID for the task's location.
-        #       The list of available locations can be obtained by calling
-        #       {Google::Cloud::Location::Locations::ListLocations ListLocations}.
-        #       For more information, see https://cloud.google.com/about/locations/.
-        #     * `QUEUE_ID` can contain letters ([A-Za-z]), numbers ([0-9]), or
-        #       hyphens (-). The maximum length is 100 characters.
-        #     * `TASK_ID` can contain only letters ([A-Za-z]), numbers ([0-9]),
-        #       hyphens (-), or underscores (_). The maximum length is 500 characters.
-        # @!attribute [rw] app_engine_http_request
-        #   @return [Google::Cloud::Tasks::V2::AppEngineHttpRequest]
-        #     HTTP request that is sent to the App Engine app handler.
-        #
-        #     An App Engine task is a task that has {Google::Cloud::Tasks::V2::AppEngineHttpRequest AppEngineHttpRequest} set.
-        # @!attribute [rw] http_request
-        #   @return [Google::Cloud::Tasks::V2::HttpRequest]
-        #     HTTP request that is sent to the worker.
-        #
-        #     An HTTP task is a task that has {Google::Cloud::Tasks::V2::HttpRequest HttpRequest} set.
-        # @!attribute [rw] schedule_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     The time when the task is scheduled to be attempted or retried.
-        #
-        #     `schedule_time` will be truncated to the nearest microsecond.
-        # @!attribute [rw] create_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Output only. The time that the task was created.
-        #
-        #     `create_time` will be truncated to the nearest second.
-        # @!attribute [rw] dispatch_deadline
-        #   @return [Google::Protobuf::Duration]
-        #     The deadline for requests sent to the worker. If the worker does not
-        #     respond by this deadline then the request is cancelled and the attempt
-        #     is marked as a `DEADLINE_EXCEEDED` failure. Cloud Tasks will retry the
-        #     task according to the {Google::Cloud::Tasks::V2::RetryConfig RetryConfig}.
-        #
-        #     Note that when the request is cancelled, Cloud Tasks will stop listing for
-        #     the response, but whether the worker stops processing depends on the
-        #     worker. For example, if the worker is stuck, it may not react to cancelled
-        #     requests.
-        #
-        #     The default and maximum values depend on the type of request:
-        #
-        #     * For {Google::Cloud::Tasks::V2::HttpRequest HTTP tasks}, the default is 10 minutes. The deadline
-        #       must be in the interval [15 seconds, 30 minutes].
-        #
-        #     * For {Google::Cloud::Tasks::V2::AppEngineHttpRequest App Engine tasks}, 0 indicates that the
-        #       request has the default deadline. The default deadline depends on the
-        #       [scaling
-        #       type](https://cloud.google.com/appengine/docs/standard/go/how-instances-are-managed#instance_scaling)
-        #       of the service: 10 minutes for standard apps with automatic scaling, 24
-        #       hours for standard apps with manual and basic scaling, and 60 minutes for
-        #       flex apps. If the request deadline is set, it must be in the interval [15
-        #       seconds, 24 hours 15 seconds]. Regardless of the task's
-        #       `dispatch_deadline`, the app handler will not run for longer than than
-        #       the service's timeout. We recommend setting the `dispatch_deadline` to
-        #       at most a few seconds more than the app handler's timeout. For more
-        #       information see
-        #       [Timeouts](https://cloud.google.com/tasks/docs/creating-appengine-handlers#timeouts).
-        #
-        #     `dispatch_deadline` will be truncated to the nearest millisecond. The
-        #     deadline is an approximate deadline.
-        # @!attribute [rw] dispatch_count
-        #   @return [Integer]
-        #     Output only. The number of attempts dispatched.
-        #
-        #     This count includes attempts which have been dispatched but haven't
-        #     received a response.
-        # @!attribute [rw] response_count
-        #   @return [Integer]
-        #     Output only. The number of attempts which have received a response.
-        # @!attribute [rw] first_attempt
-        #   @return [Google::Cloud::Tasks::V2::Attempt]
-        #     Output only. The status of the task's first attempt.
-        #
-        #     Only {Google::Cloud::Tasks::V2::Attempt#dispatch_time dispatch_time} will be set.
-        #     The other {Google::Cloud::Tasks::V2::Attempt Attempt} information is not retained by Cloud Tasks.
-        # @!attribute [rw] last_attempt
-        #   @return [Google::Cloud::Tasks::V2::Attempt]
-        #     Output only. The status of the task's last attempt.
-        # @!attribute [rw] view
-        #   @return [Google::Cloud::Tasks::V2::Task::View]
-        #     Output only. The view specifies which subset of the {Google::Cloud::Tasks::V2::Task Task} has
-        #     been returned.
-        class Task
-          # The view specifies a subset of {Google::Cloud::Tasks::V2::Task Task} data.
-          #
-          # When a task is returned in a response, not all
-          # information is retrieved by default because some data, such as
-          # payloads, might be desirable to return only when needed because
-          # of its large size or because of the sensitivity of data that it
-          # contains.
-          module View
-            # Unspecified. Defaults to BASIC.
-            VIEW_UNSPECIFIED = 0
-
-            # The basic view omits fields which can be large or can contain
-            # sensitive data.
-            #
-            # This view does not include the
-            # {Google::Cloud::Tasks::V2::AppEngineHttpRequest#body body in AppEngineHttpRequest}.
-            # Bodies are desirable to return only when needed, because they
-            # can be large and because of the sensitivity of the data that you
-            # choose to store in it.
-            BASIC = 1
-
-            # All information is returned.
-            #
-            # Authorization for {Google::Cloud::Tasks::V2::Task::View::FULL FULL} requires
-            # `cloudtasks.tasks.fullView` [Google IAM](https://cloud.google.com/iam/)
-            # permission on the {Google::Cloud::Tasks::V2::Queue Queue} resource.
-            FULL = 2
-          end
-        end
-
-        # The status of a task attempt.
-        # @!attribute [rw] schedule_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Output only. The time that this attempt was scheduled.
-        #
-        #     `schedule_time` will be truncated to the nearest microsecond.
-        # @!attribute [rw] dispatch_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Output only. The time that this attempt was dispatched.
-        #
-        #     `dispatch_time` will be truncated to the nearest microsecond.
-        # @!attribute [rw] response_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Output only. The time that this attempt response was received.
-        #
-        #     `response_time` will be truncated to the nearest microsecond.
-        # @!attribute [rw] response_status
-        #   @return [Google::Rpc::Status]
-        #     Output only. The response from the worker for this attempt.
-        #
-        #     If `response_time` is unset, then the task has not been attempted or is
-        #     currently running and the `response_status` field is meaningless.
-        class Attempt; end
-      end
-    end
-  end
-end