google-cloud-tasks 0.2.4 → 0.2.5

data/lib/google/cloud/tasks/v2beta3/doc/google/protobuf/duration.rb

@@ -0,0 +1,91 @@
+# Copyright 2018 Google LLC
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+module Google
+  module Protobuf
+    # A Duration represents a signed, fixed-length span of time represented
+    # as a count of seconds and fractions of seconds at nanosecond
+    # resolution. It is independent of any calendar and concepts like "day"
+    # or "month". It is related to Timestamp in that the difference between
+    # two Timestamp values is a Duration and it can be added or subtracted
+    # from a Timestamp. Range is approximately +-10,000 years.
+    #
+    # = Examples
+    #
+    # Example 1: Compute Duration from two Timestamps in pseudo code.
+    #
+    #     Timestamp start = ...;
+    #     Timestamp end = ...;
+    #     Duration duration = ...;
+    #
+    #     duration.seconds = end.seconds - start.seconds;
+    #     duration.nanos = end.nanos - start.nanos;
+    #
+    #     if (duration.seconds < 0 && duration.nanos > 0) {
+    #       duration.seconds += 1;
+    #       duration.nanos -= 1000000000;
+    #     } else if (durations.seconds > 0 && duration.nanos < 0) {
+    #       duration.seconds -= 1;
+    #       duration.nanos += 1000000000;
+    #     }
+    #
+    # Example 2: Compute Timestamp from Timestamp + Duration in pseudo code.
+    #
+    #     Timestamp start = ...;
+    #     Duration duration = ...;
+    #     Timestamp end = ...;
+    #
+    #     end.seconds = start.seconds + duration.seconds;
+    #     end.nanos = start.nanos + duration.nanos;
+    #
+    #     if (end.nanos < 0) {
+    #       end.seconds -= 1;
+    #       end.nanos += 1000000000;
+    #     } else if (end.nanos >= 1000000000) {
+    #       end.seconds += 1;
+    #       end.nanos -= 1000000000;
+    #     }
+    #
+    # Example 3: Compute Duration from datetime.timedelta in Python.
+    #
+    #     td = datetime.timedelta(days=3, minutes=10)
+    #     duration = Duration()
+    #     duration.FromTimedelta(td)
+    #
+    # = JSON Mapping
+    #
+    # In JSON format, the Duration type is encoded as a string rather than an
+    # object, where the string ends in the suffix "s" (indicating seconds) and
+    # is preceded by the number of seconds, with nanoseconds expressed as
+    # fractional seconds. For example, 3 seconds with 0 nanoseconds should be
+    # encoded in JSON format as "3s", while 3 seconds and 1 nanosecond should
+    # be expressed in JSON format as "3.000000001s", and 3 seconds and 1
+    # microsecond should be expressed in JSON format as "3.000001s".
+    # @!attribute [rw] seconds
+    #   @return [Integer]
+    #     Signed seconds of the span of time. Must be from -315,576,000,000
+    #     to +315,576,000,000 inclusive. Note: these bounds are computed from:
+    #     60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
+    # @!attribute [rw] nanos
+    #   @return [Integer]
+    #     Signed fractions of a second at nanosecond resolution of the span
+    #     of time. Durations less than one second are represented with a 0
+    #     `seconds` field and a positive or negative `nanos` field. For durations
+    #     of one second or more, a non-zero value for the `nanos` field must be
+    #     of the same sign as the `seconds` field. Must be from -999,999,999
+    #     to +999,999,999 inclusive.
+    class Duration; end
+  end
+end

data/lib/google/cloud/tasks/v2beta3/doc/google/protobuf/empty.rb

@@ -0,0 +1,29 @@
+# Copyright 2018 Google LLC
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+module Google
+  module Protobuf
+    # A generic empty message that you can re-use to avoid defining duplicated
+    # empty messages in your APIs. A typical example is to use it as the request
+    # or the response type of an API method. For instance:
+    #
+    #     service Foo {
+    #       rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty);
+    #     }
+    #
+    # The JSON representation for `Empty` is empty JSON object `{}`.
+    class Empty; end
+  end
+end

data/lib/google/cloud/tasks/v2beta3/doc/google/protobuf/field_mask.rb

@@ -0,0 +1,230 @@
+# Copyright 2018 Google LLC
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+module Google
+  module Protobuf
+    # `FieldMask` represents a set of symbolic field paths, for example:
+    #
+    #     paths: "f.a"
+    #     paths: "f.b.d"
+    #
+    # Here `f` represents a field in some root message, `a` and `b`
+    # fields in the message found in `f`, and `d` a field found in the
+    # message in `f.b`.
+    #
+    # Field masks are used to specify a subset of fields that should be
+    # returned by a get operation or modified by an update operation.
+    # Field masks also have a custom JSON encoding (see below).
+    #
+    # = Field Masks in Projections
+    #
+    # When used in the context of a projection, a response message or
+    # sub-message is filtered by the API to only contain those fields as
+    # specified in the mask. For example, if the mask in the previous
+    # example is applied to a response message as follows:
+    #
+    #     f {
+    #       a : 22
+    #       b {
+    #         d : 1
+    #         x : 2
+    #       }
+    #       y : 13
+    #     }
+    #     z: 8
+    #
+    # The result will not contain specific values for fields x,y and z
+    # (their value will be set to the default, and omitted in proto text
+    # output):
+    #
+    #
+    #     f {
+    #       a : 22
+    #       b {
+    #         d : 1
+    #       }
+    #     }
+    #
+    # A repeated field is not allowed except at the last position of a
+    # paths string.
+    #
+    # If a FieldMask object is not present in a get operation, the
+    # operation applies to all fields (as if a FieldMask of all fields
+    # had been specified).
+    #
+    # Note that a field mask does not necessarily apply to the
+    # top-level response message. In case of a REST get operation, the
+    # field mask applies directly to the response, but in case of a REST
+    # list operation, the mask instead applies to each individual message
+    # in the returned resource list. In case of a REST custom method,
+    # other definitions may be used. Where the mask applies will be
+    # clearly documented together with its declaration in the API.  In
+    # any case, the effect on the returned resource/resources is required
+    # behavior for APIs.
+    #
+    # = Field Masks in Update Operations
+    #
+    # A field mask in update operations specifies which fields of the
+    # targeted resource are going to be updated. The API is required
+    # to only change the values of the fields as specified in the mask
+    # and leave the others untouched. If a resource is passed in to
+    # describe the updated values, the API ignores the values of all
+    # fields not covered by the mask.
+    #
+    # If a repeated field is specified for an update operation, the existing
+    # repeated values in the target resource will be overwritten by the new values.
+    # Note that a repeated field is only allowed in the last position of a `paths`
+    # string.
+    #
+    # If a sub-message is specified in the last position of the field mask for an
+    # update operation, then the existing sub-message in the target resource is
+    # overwritten. Given the target message:
+    #
+    #     f {
+    #       b {
+    #         d : 1
+    #         x : 2
+    #       }
+    #       c : 1
+    #     }
+    #
+    # And an update message:
+    #
+    #     f {
+    #       b {
+    #         d : 10
+    #       }
+    #     }
+    #
+    # then if the field mask is:
+    #
+    #  paths: "f.b"
+    #
+    # then the result will be:
+    #
+    #     f {
+    #       b {
+    #         d : 10
+    #       }
+    #       c : 1
+    #     }
+    #
+    # However, if the update mask was:
+    #
+    #  paths: "f.b.d"
+    #
+    # then the result would be:
+    #
+    #     f {
+    #       b {
+    #         d : 10
+    #         x : 2
+    #       }
+    #       c : 1
+    #     }
+    #
+    # In order to reset a field's value to the default, the field must
+    # be in the mask and set to the default value in the provided resource.
+    # Hence, in order to reset all fields of a resource, provide a default
+    # instance of the resource and set all fields in the mask, or do
+    # not provide a mask as described below.
+    #
+    # If a field mask is not present on update, the operation applies to
+    # all fields (as if a field mask of all fields has been specified).
+    # Note that in the presence of schema evolution, this may mean that
+    # fields the client does not know and has therefore not filled into
+    # the request will be reset to their default. If this is unwanted
+    # behavior, a specific service may require a client to always specify
+    # a field mask, producing an error if not.
+    #
+    # As with get operations, the location of the resource which
+    # describes the updated values in the request message depends on the
+    # operation kind. In any case, the effect of the field mask is
+    # required to be honored by the API.
+    #
+    # == Considerations for HTTP REST
+    #
+    # The HTTP kind of an update operation which uses a field mask must
+    # be set to PATCH instead of PUT in order to satisfy HTTP semantics
+    # (PUT must only be used for full updates).
+    #
+    # = JSON Encoding of Field Masks
+    #
+    # In JSON, a field mask is encoded as a single string where paths are
+    # separated by a comma. Fields name in each path are converted
+    # to/from lower-camel naming conventions.
+    #
+    # As an example, consider the following message declarations:
+    #
+    #     message Profile {
+    #       User user = 1;
+    #       Photo photo = 2;
+    #     }
+    #     message User {
+    #       string display_name = 1;
+    #       string address = 2;
+    #     }
+    #
+    # In proto a field mask for `Profile` may look as such:
+    #
+    #     mask {
+    #       paths: "user.display_name"
+    #       paths: "photo"
+    #     }
+    #
+    # In JSON, the same mask is represented as below:
+    #
+    #     {
+    #       mask: "user.displayName,photo"
+    #     }
+    #
+    # = Field Masks and Oneof Fields
+    #
+    # Field masks treat fields in oneofs just as regular fields. Consider the
+    # following message:
+    #
+    #     message SampleMessage {
+    #       oneof test_oneof {
+    #         string name = 4;
+    #         SubMessage sub_message = 9;
+    #       }
+    #     }
+    #
+    # The field mask can be:
+    #
+    #     mask {
+    #       paths: "name"
+    #     }
+    #
+    # Or:
+    #
+    #     mask {
+    #       paths: "sub_message"
+    #     }
+    #
+    # Note that oneof type names ("test_oneof" in this case) cannot be used in
+    # paths.
+    #
+    # == Field Mask Verification
+    #
+    # The implementation of any API method which has a FieldMask type field in the
+    # request should verify the included field paths, and return an
+    # `INVALID_ARGUMENT` error if any path is duplicated or unmappable.
+    # @!attribute [rw] paths
+    #   @return [Array<String>]
+    #     The set of field mask paths.
+    class FieldMask; end
+  end
+end

data/lib/google/cloud/tasks/v2beta3/doc/google/protobuf/timestamp.rb

@@ -0,0 +1,109 @@
+# Copyright 2018 Google LLC
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+module Google
+  module Protobuf
+    # A Timestamp represents a point in time independent of any time zone
+    # or calendar, represented as seconds and fractions of seconds at
+    # nanosecond resolution in UTC Epoch time. It is encoded using the
+    # Proleptic Gregorian Calendar which extends the Gregorian calendar
+    # backwards to year one. It is encoded assuming all minutes are 60
+    # seconds long, i.e. leap seconds are "smeared" so that no leap second
+    # table is needed for interpretation. Range is from
+    # 0001-01-01T00:00:00Z to 9999-12-31T23:59:59.999999999Z.
+    # By restricting to that range, we ensure that we can convert to
+    # and from  RFC 3339 date strings.
+    # See [https://www.ietf.org/rfc/rfc3339.txt](https://www.ietf.org/rfc/rfc3339.txt).
+    #
+    # = Examples
+    #
+    # Example 1: Compute Timestamp from POSIX `time()`.
+    #
+    #     Timestamp timestamp;
+    #     timestamp.set_seconds(time(NULL));
+    #     timestamp.set_nanos(0);
+    #
+    # Example 2: Compute Timestamp from POSIX `gettimeofday()`.
+    #
+    #     struct timeval tv;
+    #     gettimeofday(&tv, NULL);
+    #
+    #     Timestamp timestamp;
+    #     timestamp.set_seconds(tv.tv_sec);
+    #     timestamp.set_nanos(tv.tv_usec * 1000);
+    #
+    # Example 3: Compute Timestamp from Win32 `GetSystemTimeAsFileTime()`.
+    #
+    #     FILETIME ft;
+    #     GetSystemTimeAsFileTime(&ft);
+    #     UINT64 ticks = (((UINT64)ft.dwHighDateTime) << 32) | ft.dwLowDateTime;
+    #
+    #     // A Windows tick is 100 nanoseconds. Windows epoch 1601-01-01T00:00:00Z
+    #     // is 11644473600 seconds before Unix epoch 1970-01-01T00:00:00Z.
+    #     Timestamp timestamp;
+    #     timestamp.set_seconds((INT64) ((ticks / 10000000) - 11644473600LL));
+    #     timestamp.set_nanos((INT32) ((ticks % 10000000) * 100));
+    #
+    # Example 4: Compute Timestamp from Java `System.currentTimeMillis()`.
+    #
+    #     long millis = System.currentTimeMillis();
+    #
+    #     Timestamp timestamp = Timestamp.newBuilder().setSeconds(millis / 1000)
+    #         .setNanos((int) ((millis % 1000) * 1000000)).build();
+    #
+    #
+    # Example 5: Compute Timestamp from current time in Python.
+    #
+    #     timestamp = Timestamp()
+    #     timestamp.GetCurrentTime()
+    #
+    # = JSON Mapping
+    #
+    # In JSON format, the Timestamp type is encoded as a string in the
+    # [RFC 3339](https://www.ietf.org/rfc/rfc3339.txt) format. That is, the
+    # format is "\\{year}-\\{month}-\\{day}T\\{hour}:\\{min}:\\{sec}[.\\{frac_sec}]Z"
+    # where \\{year} is always expressed using four digits while \\{month}, \\{day},
+    # \\{hour}, \\{min}, and \\{sec} are zero-padded to two digits each. The fractional
+    # seconds, which can go up to 9 digits (i.e. up to 1 nanosecond resolution),
+    # are optional. The "Z" suffix indicates the timezone ("UTC"); the timezone
+    # is required. A proto3 JSON serializer should always use UTC (as indicated by
+    # "Z") when printing the Timestamp type and a proto3 JSON parser should be
+    # able to accept both UTC and other timezones (as indicated by an offset).
+    #
+    # For example, "2017-01-15T01:30:15.01Z" encodes 15.01 seconds past
+    # 01:30 UTC on January 15, 2017.
+    #
+    # In JavaScript, one can convert a Date object to this format using the
+    # standard [toISOString()](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Date/toISOString]
+    # method. In Python, a standard `datetime.datetime` object can be converted
+    # to this format using [`strftime`](https://docs.python.org/2/library/time.html#time.strftime)
+    # with the time format spec '%Y-%m-%dT%H:%M:%S.%fZ'. Likewise, in Java, one
+    # can use the Joda Time's [`ISODateTimeFormat.dateTime()`](
+    # http://www.joda.org/joda-time/apidocs/org/joda/time/format/ISODateTimeFormat.html#dateTime--
+    # ) to obtain a formatter capable of generating timestamps in this format.
+    # @!attribute [rw] seconds
+    #   @return [Integer]
+    #     Represents seconds of UTC time since Unix epoch
+    #     1970-01-01T00:00:00Z. Must be from 0001-01-01T00:00:00Z to
+    #     9999-12-31T23:59:59Z inclusive.
+    # @!attribute [rw] nanos
+    #   @return [Integer]
+    #     Non-negative fractions of a second at nanosecond resolution. Negative
+    #     second values with fractions must still have non-negative nanos values
+    #     that count forward in time. Must be from 0 to 999,999,999
+    #     inclusive.
+    class Timestamp; end
+  end
+end