google-cloud-security_center 0.8.0 → 1.1.1

data/lib/google/cloud/security_center/v1/doc/google/cloud/securitycenter/v1/finding.rb

@@ -1,97 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Cloud
-    module Securitycenter
-      module V1
-        # Cloud Security Command Center (Cloud SCC) finding.
-        #
-        # A finding is a record of assessment data like security, risk, health, or
-        # privacy, that is ingested into Cloud SCC for presentation, notification,
-        # analysis, policy testing, and enforcement. For example, a
-        # cross-site scripting (XSS) vulnerability in an App Engine application is a
-        # finding.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     The relative resource name of this finding. See:
-        #     https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        #     Example:
-        #     "organizations/{organization_id}/sources/{source_id}/findings/{finding_id}"
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     The relative resource name of the source the finding belongs to. See:
-        #     https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        #     This field is immutable after creation time.
-        #     For example:
-        #     "organizations/{organization_id}/sources/{source_id}"
-        # @!attribute [rw] resource_name
-        #   @return [String]
-        #     For findings on Google Cloud Platform (GCP) resources, the full resource
-        #     name of the GCP resource this finding is for. See:
-        #     https://cloud.google.com/apis/design/resource_names#full_resource_name
-        #     When the finding is for a non-GCP resource, the resourceName can be a
-        #     customer or partner defined string.
-        #     This field is immutable after creation time.
-        # @!attribute [rw] state
-        #   @return [Google::Cloud::SecurityCenter::V1::Finding::State]
-        #     The state of the finding.
-        # @!attribute [rw] category
-        #   @return [String]
-        #     The additional taxonomy group within findings from a given source.
-        #     This field is immutable after creation time.
-        #     Example: "XSS_FLASH_INJECTION"
-        # @!attribute [rw] external_uri
-        #   @return [String]
-        #     The URI that, if available, points to a web page outside of Cloud SCC
-        #     where additional information about the finding can be found. This field is
-        #     guaranteed to be either empty or a well formed URL.
-        # @!attribute [rw] source_properties
-        #   @return [Hash{String => Google::Protobuf::Value}]
-        #     Source specific properties. These properties are managed by the source
-        #     that writes the finding. The key names in the source_properties map must be
-        #     between 1 and 255 characters, and must start with a letter and contain
-        #     alphanumeric characters or underscores only.
-        # @!attribute [rw] security_marks
-        #   @return [Google::Cloud::SecurityCenter::V1::SecurityMarks]
-        #     Output only. User specified security marks. These marks are entirely
-        #     managed by the user and come from the SecurityMarks resource that belongs
-        #     to the finding.
-        # @!attribute [rw] event_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     The time at which the event took place. For example, if the finding
-        #     represents an open firewall it would capture the time the detector believes
-        #     the firewall became open. The accuracy is determined by the detector.
-        # @!attribute [rw] create_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     The time at which the finding was created in Cloud SCC.
-        class Finding
-          # The state of the finding.
-          module State
-            # Unspecified state.
-            STATE_UNSPECIFIED = 0
-
-            # The finding requires attention and has not been addressed yet.
-            ACTIVE = 1
-
-            # The finding has been fixed, triaged as a non-issue or otherwise addressed
-            # and is no longer active.
-            INACTIVE = 2
-          end
-        end
-      end
-    end
-  end
-end

data/lib/google/cloud/security_center/v1/doc/google/cloud/securitycenter/v1/notification_config.rb

@@ -1,75 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Cloud
-    module Securitycenter
-      module V1
-        # Cloud Security Command Center (Cloud SCC) notification configs.
-        #
-        # A notification config is a Cloud SCC resource that contains the configuration
-        # to send notifications for create/update events of findings, assets and etc.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     The relative resource name of this notification config. See:
-        #     https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        #     Example:
-        #     "organizations/{organization_id}/notificationConfigs/notify_public_bucket".
-        # @!attribute [rw] description
-        #   @return [String]
-        #     The description of the notification config (max of 1024 characters).
-        # @!attribute [rw] pubsub_topic
-        #   @return [String]
-        #     The PubSub topic to send notifications to. Its format is
-        #     "projects/[project_id]/topics/[topic]".
-        # @!attribute [rw] service_account
-        #   @return [String]
-        #     Output only. The service account that needs "pubsub.topics.publish"
-        #     permission to publish to the PubSub topic.
-        # @!attribute [rw] streaming_config
-        #   @return [Google::Cloud::SecurityCenter::V1::NotificationConfig::StreamingConfig]
-        #     The config for triggering streaming-based notifications.
-        class NotificationConfig
-          # The config for streaming-based notifications, which send each event as soon
-          # as it is detected.
-          # @!attribute [rw] filter
-          #   @return [String]
-          #     Expression that defines the filter to apply across create/update events
-          #     of assets or findings as specified by the event type. The expression is a
-          #     list of zero or more restrictions combined via logical operators `AND`
-          #     and `OR`. Parentheses are supported, and `OR` has higher precedence than
-          #     `AND`.
-          #
-          #     Restrictions have the form `<field> <operator> <value>` and may have a
-          #     `-` character in front of them to indicate negation. The fields map to
-          #     those defined in the corresponding resource.
-          #
-          #     The supported operators are:
-          #
-          #     * `=` for all value types.
-          #     * `>`, `<`, `>=`, `<=` for integer values.
-          #     * `:`, meaning substring matching, for strings.
-          #
-          #     The supported value types are:
-          #
-          #     * string literals in quotes.
-          #     * integer literals without quotes.
-          #     * boolean literals `true` and `false` without quotes.
-          class StreamingConfig; end
-        end
-      end
-    end
-  end
-end

data/lib/google/cloud/security_center/v1/doc/google/cloud/securitycenter/v1/organization_settings.rb

@@ -1,72 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Cloud
-    module Securitycenter
-      module V1
-        # User specified settings that are attached to the Cloud Security Command
-        # Center (Cloud SCC) organization.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     The relative resource name of the settings. See:
-        #     https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        #     Example:
-        #     "organizations/{organization_id}/organizationSettings".
-        # @!attribute [rw] enable_asset_discovery
-        #   @return [true, false]
-        #     A flag that indicates if Asset Discovery should be enabled. If the flag is
-        #     set to `true`, then discovery of assets will occur. If it is set to `false,
-        #     all historical assets will remain, but discovery of future assets will not
-        #     occur.
-        # @!attribute [rw] asset_discovery_config
-        #   @return [Google::Cloud::SecurityCenter::V1::OrganizationSettings::AssetDiscoveryConfig]
-        #     The configuration used for Asset Discovery runs.
-        class OrganizationSettings
-          # The configuration used for Asset Discovery runs.
-          # @!attribute [rw] project_ids
-          #   @return [Array<String>]
-          #     The project ids to use for filtering asset discovery.
-          # @!attribute [rw] inclusion_mode
-          #   @return [Google::Cloud::SecurityCenter::V1::OrganizationSettings::AssetDiscoveryConfig::InclusionMode]
-          #     The mode to use for filtering asset discovery.
-          class AssetDiscoveryConfig
-            # The mode of inclusion when running Asset Discovery.
-            # Asset discovery can be limited by explicitly identifying projects to be
-            # included or excluded. If INCLUDE_ONLY is set, then only those projects
-            # within the organization and their children are discovered during asset
-            # discovery. If EXCLUDE is set, then projects that don't match those
-            # projects are discovered during asset discovery. If neither are set, then
-            # all projects within the organization are discovered during asset
-            # discovery.
-            module InclusionMode
-              # Unspecified. Setting the mode with this value will disable
-              # inclusion/exclusion filtering for Asset Discovery.
-              INCLUSION_MODE_UNSPECIFIED = 0
-
-              # Asset Discovery will capture only the resources within the projects
-              # specified. All other resources will be ignored.
-              INCLUDE_ONLY = 1
-
-              # Asset Discovery will ignore all resources under the projects specified.
-              # All other resources will be retrieved.
-              EXCLUDE = 2
-            end
-          end
-        end
-      end
-    end
-  end
-end

data/lib/google/cloud/security_center/v1/doc/google/cloud/securitycenter/v1/security_marks.rb

@@ -1,45 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Cloud
-    module Securitycenter
-      module V1
-        # User specified security marks that are attached to the parent Cloud Security
-        # Command Center (Cloud SCC) resource. Security marks are scoped within a Cloud
-        # SCC organization -- they can be modified and viewed by all users who have
-        # proper permissions on the organization.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     The relative resource name of the SecurityMarks. See:
-        #     https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        #     Examples:
-        #     "organizations/{organization_id}/assets/{asset_id}/securityMarks"
-        #     "organizations/{organization_id}/sources/{source_id}/findings/{finding_id}/securityMarks".
-        # @!attribute [rw] marks
-        #   @return [Hash{String => String}]
-        #     Mutable user specified security marks belonging to the parent resource.
-        #     Constraints are as follows:
-        #
-        #     * Keys and values are treated as case insensitive
-        #       * Keys must be between 1 - 256 characters (inclusive)
-        #       * Keys must be letters, numbers, underscores, or dashes
-        #       * Values have leading and trailing whitespace trimmed, remaining
-        #         characters must be between 1 - 4096 characters (inclusive)
-        class SecurityMarks; end
-      end
-    end
-  end
-end

data/lib/google/cloud/security_center/v1/doc/google/cloud/securitycenter/v1/securitycenter_service.rb

@@ -1,912 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Cloud
-    module Securitycenter
-      module V1
-        # Request message for creating a finding.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. Resource name of the new finding's parent. Its format should be
-        #     "organizations/[organization_id]/sources/[source_id]".
-        # @!attribute [rw] finding_id
-        #   @return [String]
-        #     Required. Unique identifier provided by the client within the parent scope.
-        #     It must be alphanumeric and less than or equal to 32 characters and
-        #     greater than 0 characters in length.
-        # @!attribute [rw] finding
-        #   @return [Google::Cloud::SecurityCenter::V1::Finding]
-        #     Required. The Finding being created. The name and security_marks will be
-        #     ignored as they are both output only fields on this resource.
-        class CreateFindingRequest; end
-
-        # Request message for creating a notification config.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. Resource name of the new notification config's parent. Its format
-        #     is "organizations/[organization_id]".
-        # @!attribute [rw] config_id
-        #   @return [String]
-        #     Required.
-        #     Unique identifier provided by the client within the parent scope.
-        #     It must be between 1 and 128 characters, and contains alphanumeric
-        #     characters, underscores or hyphens only.
-        # @!attribute [rw] notification_config
-        #   @return [Google::Cloud::SecurityCenter::V1::NotificationConfig]
-        #     Required. The notification config being created. The name and the service
-        #     account will be ignored as they are both output only fields on this
-        #     resource.
-        class CreateNotificationConfigRequest; end
-
-        # Request message for creating a source.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. Resource name of the new source's parent. Its format should be
-        #     "organizations/[organization_id]".
-        # @!attribute [rw] source
-        #   @return [Google::Cloud::SecurityCenter::V1::Source]
-        #     Required. The Source being created, only the display_name and description
-        #     will be used. All other fields will be ignored.
-        class CreateSourceRequest; end
-
-        # Request message for deleting a notification config.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Name of the notification config to delete. Its format is
-        #     "organizations/[organization_id]/notificationConfigs/[config_id]".
-        class DeleteNotificationConfigRequest; end
-
-        # Request message for getting a notification config.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Name of the notification config to get. Its format is
-        #     "organizations/[organization_id]/notificationConfigs/[config_id]".
-        class GetNotificationConfigRequest; end
-
-        # Request message for getting organization settings.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Name of the organization to get organization settings for. Its
-        #     format is "organizations/[organization_id]/organizationSettings".
-        class GetOrganizationSettingsRequest; end
-
-        # Request message for getting a source.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Relative resource name of the source. Its format is
-        #     "organizations/[organization_id]/source/[source_id]".
-        class GetSourceRequest; end
-
-        # Request message for grouping by assets.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. Name of the organization to groupBy. Its format is
-        #     "organizations/[organization_id]".
-        # @!attribute [rw] filter
-        #   @return [String]
-        #     Expression that defines the filter to apply across assets.
-        #     The expression is a list of zero or more restrictions combined via logical
-        #     operators `AND` and `OR`.
-        #     Parentheses are supported, and `OR` has higher precedence than `AND`.
-        #
-        #     Restrictions have the form `<field> <operator> <value>` and may have a `-`
-        #     character in front of them to indicate negation. The fields map to those
-        #     defined in the Asset resource. Examples include:
-        #
-        #     * name
-        #     * security_center_properties.resource_name
-        #     * resource_properties.a_property
-        #     * security_marks.marks.marka
-        #
-        #     The supported operators are:
-        #
-        #     * `=` for all value types.
-        #     * `>`, `<`, `>=`, `<=` for integer values.
-        #     * `:`, meaning substring matching, for strings.
-        #
-        #     The supported value types are:
-        #
-        #     * string literals in quotes.
-        #     * integer literals without quotes.
-        #     * boolean literals `true` and `false` without quotes.
-        #
-        #     The following field and operator combinations are supported:
-        #
-        #     * name: `=`
-        #     * update_time: `=`, `>`, `<`, `>=`, `<=`
-        #
-        #       Usage: This should be milliseconds since epoch or an RFC3339 string.
-        #       Examples:
-        #       "update_time = \"2019-06-10T16:07:18-07:00\""
-        #       "update_time = 1560208038000"
-        #
-        #     * create_time: `=`, `>`, `<`, `>=`, `<=`
-        #
-        #       Usage: This should be milliseconds since epoch or an RFC3339 string.
-        #       Examples:
-        #       "create_time = \"2019-06-10T16:07:18-07:00\""
-        #       "create_time = 1560208038000"
-        #
-        #     * iam_policy.policy_blob: `=`, `:`
-        #     * resource_properties: `=`, `:`, `>`, `<`, `>=`, `<=`
-        #     * security_marks.marks: `=`, `:`
-        #     * security_center_properties.resource_name: `=`, `:`
-        #     * security_center_properties.resource_display_name: `=`, `:`
-        #     * security_center_properties.resource_type: `=`, `:`
-        #     * security_center_properties.resource_parent: `=`, `:`
-        #     * security_center_properties.resource_parent_display_name: `=`, `:`
-        #     * security_center_properties.resource_project: `=`, `:`
-        #     * security_center_properties.resource_project_display_name: `=`, `:`
-        #     * security_center_properties.resource_owners: `=`, `:`
-        #
-        #     For example, `resource_properties.size = 100` is a valid filter string.
-        # @!attribute [rw] group_by
-        #   @return [String]
-        #     Required. Expression that defines what assets fields to use for grouping.
-        #     The string value should follow SQL syntax: comma separated list of fields.
-        #     For example:
-        #     "security_center_properties.resource_project,security_center_properties.project".
-        #
-        #     The following fields are supported when compare_duration is not set:
-        #
-        #     * security_center_properties.resource_project
-        #     * security_center_properties.resource_project_display_name
-        #     * security_center_properties.resource_type
-        #     * security_center_properties.resource_parent
-        #     * security_center_properties.resource_parent_display_name
-        #
-        #     The following fields are supported when compare_duration is set:
-        #
-        #     * security_center_properties.resource_type
-        #     * security_center_properties.resource_project_display_name
-        #     * security_center_properties.resource_parent_display_name
-        # @!attribute [rw] compare_duration
-        #   @return [Google::Protobuf::Duration]
-        #     When compare_duration is set, the GroupResult's "state_change" property is
-        #     updated to indicate whether the asset was added, removed, or remained
-        #     present during the compare_duration period of time that precedes the
-        #     read_time. This is the time between (read_time - compare_duration) and
-        #     read_time.
-        #
-        #     The state change value is derived based on the presence of the asset at the
-        #     two points in time. Intermediate state changes between the two times don't
-        #     affect the result. For example, the results aren't affected if the asset is
-        #     removed and re-created again.
-        #
-        #     Possible "state_change" values when compare_duration is specified:
-        #
-        #     * "ADDED":   indicates that the asset was not present at the start of
-        #       compare_duration, but present at reference_time.
-        #     * "REMOVED": indicates that the asset was present at the start of
-        #       compare_duration, but not present at reference_time.
-        #     * "ACTIVE":  indicates that the asset was present at both the
-        #       start and the end of the time period defined by
-        #       compare_duration and reference_time.
-        #
-        #     If compare_duration is not specified, then the only possible state_change
-        #     is "UNUSED", which will be the state_change set for all assets present at
-        #     read_time.
-        #
-        #     If this field is set then `state_change` must be a specified field in
-        #     `group_by`.
-        # @!attribute [rw] read_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Time used as a reference point when filtering assets. The filter is limited
-        #     to assets existing at the supplied time and their values are those at that
-        #     specific time. Absence of this field will default to the API's version of
-        #     NOW.
-        # @!attribute [rw] page_token
-        #   @return [String]
-        #     The value returned by the last `GroupAssetsResponse`; indicates
-        #     that this is a continuation of a prior `GroupAssets` call, and that the
-        #     system should return the next page of data.
-        # @!attribute [rw] page_size
-        #   @return [Integer]
-        #     The maximum number of results to return in a single response. Default is
-        #     10, minimum is 1, maximum is 1000.
-        class GroupAssetsRequest; end
-
-        # Response message for grouping by assets.
-        # @!attribute [rw] group_by_results
-        #   @return [Array<Google::Cloud::SecurityCenter::V1::GroupResult>]
-        #     Group results. There exists an element for each existing unique
-        #     combination of property/values. The element contains a count for the number
-        #     of times those specific property/values appear.
-        # @!attribute [rw] read_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Time used for executing the groupBy request.
-        # @!attribute [rw] next_page_token
-        #   @return [String]
-        #     Token to retrieve the next page of results, or empty if there are no more
-        #     results.
-        # @!attribute [rw] total_size
-        #   @return [Integer]
-        #     The total number of results matching the query.
-        class GroupAssetsResponse; end
-
-        # Request message for grouping by findings.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. Name of the source to groupBy. Its format is
-        #     "organizations/[organization_id]/sources/[source_id]". To groupBy across
-        #     all sources provide a source_id of `-`. For example:
-        #     organizations/{organization_id}/sources/-
-        # @!attribute [rw] filter
-        #   @return [String]
-        #     Expression that defines the filter to apply across findings.
-        #     The expression is a list of one or more restrictions combined via logical
-        #     operators `AND` and `OR`.
-        #     Parentheses are supported, and `OR` has higher precedence than `AND`.
-        #
-        #     Restrictions have the form `<field> <operator> <value>` and may have a `-`
-        #     character in front of them to indicate negation. Examples include:
-        #
-        #     * name
-        #       * source_properties.a_property
-        #     * security_marks.marks.marka
-        #
-        #     The supported operators are:
-        #
-        #     * `=` for all value types.
-        #     * `>`, `<`, `>=`, `<=` for integer values.
-        #     * `:`, meaning substring matching, for strings.
-        #
-        #     The supported value types are:
-        #
-        #     * string literals in quotes.
-        #     * integer literals without quotes.
-        #     * boolean literals `true` and `false` without quotes.
-        #
-        #     The following field and operator combinations are supported:
-        #
-        #     * name: `=`
-        #     * parent: `=`, `:`
-        #     * resource_name: `=`, `:`
-        #     * state: `=`, `:`
-        #     * category: `=`, `:`
-        #     * external_uri: `=`, `:`
-        #     * event_time: `=`, `>`, `<`, `>=`, `<=`
-        #
-        #       Usage: This should be milliseconds since epoch or an RFC3339 string.
-        #       Examples:
-        #       "event_time = \"2019-06-10T16:07:18-07:00\""
-        #       "event_time = 1560208038000"
-        #
-        #     * security_marks.marks: `=`, `:`
-        #     * source_properties: `=`, `:`, `>`, `<`, `>=`, `<=`
-        #
-        #     For example, `source_properties.size = 100` is a valid filter string.
-        # @!attribute [rw] group_by
-        #   @return [String]
-        #     Required. Expression that defines what assets fields to use for grouping
-        #     (including `state_change`). The string value should follow SQL syntax:
-        #     comma separated list of fields. For example: "parent,resource_name".
-        #
-        #     The following fields are supported:
-        #
-        #     * resource_name
-        #     * category
-        #     * state
-        #     * parent
-        #
-        #     The following fields are supported when compare_duration is set:
-        #
-        #     * state_change
-        # @!attribute [rw] read_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Time used as a reference point when filtering findings. The filter is
-        #     limited to findings existing at the supplied time and their values are
-        #     those at that specific time. Absence of this field will default to the
-        #     API's version of NOW.
-        # @!attribute [rw] compare_duration
-        #   @return [Google::Protobuf::Duration]
-        #     When compare_duration is set, the GroupResult's "state_change" attribute is
-        #     updated to indicate whether the finding had its state changed, the
-        #     finding's state remained unchanged, or if the finding was added during the
-        #     compare_duration period of time that precedes the read_time. This is the
-        #     time between (read_time - compare_duration) and read_time.
-        #
-        #     The state_change value is derived based on the presence and state of the
-        #     finding at the two points in time. Intermediate state changes between the
-        #     two times don't affect the result. For example, the results aren't affected
-        #     if the finding is made inactive and then active again.
-        #
-        #     Possible "state_change" values when compare_duration is specified:
-        #
-        #     * "CHANGED":   indicates that the finding was present and matched the given
-        #       filter at the start of compare_duration, but changed its
-        #       state at read_time.
-        #     * "UNCHANGED": indicates that the finding was present and matched the given
-        #       filter at the start of compare_duration and did not change
-        #       state at read_time.
-        #     * "ADDED":     indicates that the finding did not match the given filter or
-        #       was not present at the start of compare_duration, but was
-        #       present at read_time.
-        #     * "REMOVED":   indicates that the finding was present and matched the
-        #       filter at the start of compare_duration, but did not match
-        #       the filter at read_time.
-        #
-        #     If compare_duration is not specified, then the only possible state_change
-        #     is "UNUSED",  which will be the state_change set for all findings present
-        #     at read_time.
-        #
-        #     If this field is set then `state_change` must be a specified field in
-        #     `group_by`.
-        # @!attribute [rw] page_token
-        #   @return [String]
-        #     The value returned by the last `GroupFindingsResponse`; indicates
-        #     that this is a continuation of a prior `GroupFindings` call, and
-        #     that the system should return the next page of data.
-        # @!attribute [rw] page_size
-        #   @return [Integer]
-        #     The maximum number of results to return in a single response. Default is
-        #     10, minimum is 1, maximum is 1000.
-        class GroupFindingsRequest; end
-
-        # Response message for group by findings.
-        # @!attribute [rw] group_by_results
-        #   @return [Array<Google::Cloud::SecurityCenter::V1::GroupResult>]
-        #     Group results. There exists an element for each existing unique
-        #     combination of property/values. The element contains a count for the number
-        #     of times those specific property/values appear.
-        # @!attribute [rw] read_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Time used for executing the groupBy request.
-        # @!attribute [rw] next_page_token
-        #   @return [String]
-        #     Token to retrieve the next page of results, or empty if there are no more
-        #     results.
-        # @!attribute [rw] total_size
-        #   @return [Integer]
-        #     The total number of results matching the query.
-        class GroupFindingsResponse; end
-
-        # Result containing the properties and count of a groupBy request.
-        # @!attribute [rw] properties
-        #   @return [Hash{String => Google::Protobuf::Value}]
-        #     Properties matching the groupBy fields in the request.
-        # @!attribute [rw] count
-        #   @return [Integer]
-        #     Total count of resources for the given properties.
-        class GroupResult; end
-
-        # Request message for listing notification configs.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. Name of the organization to list notification configs.
-        #     Its format is "organizations/[organization_id]".
-        # @!attribute [rw] page_token
-        #   @return [String]
-        #     The value returned by the last `ListNotificationConfigsResponse`; indicates
-        #     that this is a continuation of a prior `ListNotificationConfigs` call, and
-        #     that the system should return the next page of data.
-        # @!attribute [rw] page_size
-        #   @return [Integer]
-        #     The maximum number of results to return in a single response. Default is
-        #     10, minimum is 1, maximum is 1000.
-        class ListNotificationConfigsRequest; end
-
-        # Response message for listing notification configs.
-        # @!attribute [rw] notification_configs
-        #   @return [Array<Google::Cloud::SecurityCenter::V1::NotificationConfig>]
-        #     Notification configs belonging to the requested parent.
-        # @!attribute [rw] next_page_token
-        #   @return [String]
-        #     Token to retrieve the next page of results, or empty if there are no more
-        #     results.
-        class ListNotificationConfigsResponse; end
-
-        # Request message for listing sources.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. Resource name of the parent of sources to list. Its format should
-        #     be "organizations/[organization_id]".
-        # @!attribute [rw] page_token
-        #   @return [String]
-        #     The value returned by the last `ListSourcesResponse`; indicates
-        #     that this is a continuation of a prior `ListSources` call, and
-        #     that the system should return the next page of data.
-        # @!attribute [rw] page_size
-        #   @return [Integer]
-        #     The maximum number of results to return in a single response. Default is
-        #     10, minimum is 1, maximum is 1000.
-        class ListSourcesRequest; end
-
-        # Response message for listing sources.
-        # @!attribute [rw] sources
-        #   @return [Array<Google::Cloud::SecurityCenter::V1::Source>]
-        #     Sources belonging to the requested parent.
-        # @!attribute [rw] next_page_token
-        #   @return [String]
-        #     Token to retrieve the next page of results, or empty if there are no more
-        #     results.
-        class ListSourcesResponse; end
-
-        # Request message for listing assets.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. Name of the organization assets should belong to. Its format is
-        #     "organizations/[organization_id]".
-        # @!attribute [rw] filter
-        #   @return [String]
-        #     Expression that defines the filter to apply across assets.
-        #     The expression is a list of zero or more restrictions combined via logical
-        #     operators `AND` and `OR`.
-        #     Parentheses are supported, and `OR` has higher precedence than `AND`.
-        #
-        #     Restrictions have the form `<field> <operator> <value>` and may have a `-`
-        #     character in front of them to indicate negation. The fields map to those
-        #     defined in the Asset resource. Examples include:
-        #
-        #     * name
-        #     * security_center_properties.resource_name
-        #     * resource_properties.a_property
-        #     * security_marks.marks.marka
-        #
-        #     The supported operators are:
-        #
-        #     * `=` for all value types.
-        #     * `>`, `<`, `>=`, `<=` for integer values.
-        #     * `:`, meaning substring matching, for strings.
-        #
-        #     The supported value types are:
-        #
-        #     * string literals in quotes.
-        #     * integer literals without quotes.
-        #     * boolean literals `true` and `false` without quotes.
-        #
-        #     The following are the allowed field and operator combinations:
-        #
-        #     * name: `=`
-        #     * update_time: `=`, `>`, `<`, `>=`, `<=`
-        #
-        #       Usage: This should be milliseconds since epoch or an RFC3339 string.
-        #       Examples:
-        #       "update_time = \"2019-06-10T16:07:18-07:00\""
-        #       "update_time = 1560208038000"
-        #
-        #     * create_time: `=`, `>`, `<`, `>=`, `<=`
-        #
-        #       Usage: This should be milliseconds since epoch or an RFC3339 string.
-        #       Examples:
-        #       "create_time = \"2019-06-10T16:07:18-07:00\""
-        #       "create_time = 1560208038000"
-        #
-        #     * iam_policy.policy_blob: `=`, `:`
-        #     * resource_properties: `=`, `:`, `>`, `<`, `>=`, `<=`
-        #     * security_marks.marks: `=`, `:`
-        #     * security_center_properties.resource_name: `=`, `:`
-        #     * security_center_properties.resource_display_name: `=`, `:`
-        #     * security_center_properties.resource_type: `=`, `:`
-        #     * security_center_properties.resource_parent: `=`, `:`
-        #     * security_center_properties.resource_parent_display_name: `=`, `:`
-        #     * security_center_properties.resource_project: `=`, `:`
-        #     * security_center_properties.resource_project_display_name: `=`, `:`
-        #     * security_center_properties.resource_owners: `=`, `:`
-        #
-        #     For example, `resource_properties.size = 100` is a valid filter string.
-        # @!attribute [rw] order_by
-        #   @return [String]
-        #     Expression that defines what fields and order to use for sorting. The
-        #     string value should follow SQL syntax: comma separated list of fields. For
-        #     example: "name,resource_properties.a_property". The default sorting order
-        #     is ascending. To specify descending order for a field, a suffix " desc"
-        #     should be appended to the field name. For example: "name
-        #     desc,resource_properties.a_property". Redundant space characters in the
-        #     syntax are insignificant. "name desc,resource_properties.a_property" and "
-        #     name     desc  ,   resource_properties.a_property  " are equivalent.
-        #
-        #     The following fields are supported:
-        #     name
-        #     update_time
-        #     resource_properties
-        #     security_marks.marks
-        #     security_center_properties.resource_name
-        #     security_center_properties.resource_display_name
-        #     security_center_properties.resource_parent
-        #     security_center_properties.resource_parent_display_name
-        #     security_center_properties.resource_project
-        #     security_center_properties.resource_project_display_name
-        #     security_center_properties.resource_type
-        # @!attribute [rw] read_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Time used as a reference point when filtering assets. The filter is limited
-        #     to assets existing at the supplied time and their values are those at that
-        #     specific time. Absence of this field will default to the API's version of
-        #     NOW.
-        # @!attribute [rw] compare_duration
-        #   @return [Google::Protobuf::Duration]
-        #     When compare_duration is set, the ListAssetsResult's "state_change"
-        #     attribute is updated to indicate whether the asset was added, removed, or
-        #     remained present during the compare_duration period of time that precedes
-        #     the read_time. This is the time between (read_time - compare_duration) and
-        #     read_time.
-        #
-        #     The state_change value is derived based on the presence of the asset at the
-        #     two points in time. Intermediate state changes between the two times don't
-        #     affect the result. For example, the results aren't affected if the asset is
-        #     removed and re-created again.
-        #
-        #     Possible "state_change" values when compare_duration is specified:
-        #
-        #     * "ADDED":   indicates that the asset was not present at the start of
-        #       compare_duration, but present at read_time.
-        #     * "REMOVED": indicates that the asset was present at the start of
-        #       compare_duration, but not present at read_time.
-        #     * "ACTIVE":  indicates that the asset was present at both the
-        #       start and the end of the time period defined by
-        #       compare_duration and read_time.
-        #
-        #     If compare_duration is not specified, then the only possible state_change
-        #     is "UNUSED",  which will be the state_change set for all assets present at
-        #     read_time.
-        # @!attribute [rw] field_mask
-        #   @return [Google::Protobuf::FieldMask]
-        #     Optional. A field mask to specify the ListAssetsResult fields to be listed
-        #     in the response. An empty field mask will list all fields.
-        # @!attribute [rw] page_token
-        #   @return [String]
-        #     The value returned by the last `ListAssetsResponse`; indicates
-        #     that this is a continuation of a prior `ListAssets` call, and
-        #     that the system should return the next page of data.
-        # @!attribute [rw] page_size
-        #   @return [Integer]
-        #     The maximum number of results to return in a single response. Default is
-        #     10, minimum is 1, maximum is 1000.
-        class ListAssetsRequest; end
-
-        # Response message for listing assets.
-        # @!attribute [rw] list_assets_results
-        #   @return [Array<Google::Cloud::SecurityCenter::V1::ListAssetsResponse::ListAssetsResult>]
-        #     Assets matching the list request.
-        # @!attribute [rw] read_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Time used for executing the list request.
-        # @!attribute [rw] next_page_token
-        #   @return [String]
-        #     Token to retrieve the next page of results, or empty if there are no more
-        #     results.
-        # @!attribute [rw] total_size
-        #   @return [Integer]
-        #     The total number of assets matching the query.
-        class ListAssetsResponse
-          # Result containing the Asset and its State.
-          # @!attribute [rw] asset
-          #   @return [Google::Cloud::SecurityCenter::V1::Asset]
-          #     Asset matching the search request.
-          # @!attribute [rw] state_change
-          #   @return [Google::Cloud::SecurityCenter::V1::ListAssetsResponse::ListAssetsResult::StateChange]
-          #     State change of the asset between the points in time.
-          class ListAssetsResult
-            # The change in state of the asset.
-            #
-            # When querying across two points in time this describes
-            # the change between the two points: ADDED, REMOVED, or ACTIVE.
-            # If there was no compare_duration supplied in the request the state change
-            # will be: UNUSED
-            module StateChange
-              # State change is unused, this is the canonical default for this enum.
-              UNUSED = 0
-
-              # Asset was added between the points in time.
-              ADDED = 1
-
-              # Asset was removed between the points in time.
-              REMOVED = 2
-
-              # Asset was present at both point(s) in time.
-              ACTIVE = 3
-            end
-          end
-        end
-
-        # Request message for listing findings.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. Name of the source the findings belong to. Its format is
-        #     "organizations/[organization_id]/sources/[source_id]". To list across all
-        #     sources provide a source_id of `-`. For example:
-        #     organizations/{organization_id}/sources/-
-        # @!attribute [rw] filter
-        #   @return [String]
-        #     Expression that defines the filter to apply across findings.
-        #     The expression is a list of one or more restrictions combined via logical
-        #     operators `AND` and `OR`.
-        #     Parentheses are supported, and `OR` has higher precedence than `AND`.
-        #
-        #     Restrictions have the form `<field> <operator> <value>` and may have a `-`
-        #     character in front of them to indicate negation. Examples include:
-        #
-        #     * name
-        #       * source_properties.a_property
-        #     * security_marks.marks.marka
-        #
-        #     The supported operators are:
-        #
-        #     * `=` for all value types.
-        #     * `>`, `<`, `>=`, `<=` for integer values.
-        #     * `:`, meaning substring matching, for strings.
-        #
-        #     The supported value types are:
-        #
-        #     * string literals in quotes.
-        #     * integer literals without quotes.
-        #     * boolean literals `true` and `false` without quotes.
-        #
-        #     The following field and operator combinations are supported:
-        #
-        #     name: `=`
-        #     parent: `=`, `:`
-        #     resource_name: `=`, `:`
-        #     state: `=`, `:`
-        #     category: `=`, `:`
-        #     external_uri: `=`, `:`
-        #     event_time: `=`, `>`, `<`, `>=`, `<=`
-        #
-        #       Usage: This should be milliseconds since epoch or an RFC3339 string.
-        #       Examples:
-        #         "event_time = \"2019-06-10T16:07:18-07:00\""
-        #         "event_time = 1560208038000"
-        #
-        #     security_marks.marks: `=`, `:`
-        #     source_properties: `=`, `:`, `>`, `<`, `>=`, `<=`
-        #
-        #     For example, `source_properties.size = 100` is a valid filter string.
-        # @!attribute [rw] order_by
-        #   @return [String]
-        #     Expression that defines what fields and order to use for sorting. The
-        #     string value should follow SQL syntax: comma separated list of fields. For
-        #     example: "name,resource_properties.a_property". The default sorting order
-        #     is ascending. To specify descending order for a field, a suffix " desc"
-        #     should be appended to the field name. For example: "name
-        #     desc,source_properties.a_property". Redundant space characters in the
-        #     syntax are insignificant. "name desc,source_properties.a_property" and "
-        #     name     desc  ,   source_properties.a_property  " are equivalent.
-        #
-        #     The following fields are supported:
-        #     name
-        #     parent
-        #     state
-        #     category
-        #     resource_name
-        #     event_time
-        #     source_properties
-        #     security_marks.marks
-        # @!attribute [rw] read_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Time used as a reference point when filtering findings. The filter is
-        #     limited to findings existing at the supplied time and their values are
-        #     those at that specific time. Absence of this field will default to the
-        #     API's version of NOW.
-        # @!attribute [rw] compare_duration
-        #   @return [Google::Protobuf::Duration]
-        #     When compare_duration is set, the ListFindingsResult's "state_change"
-        #     attribute is updated to indicate whether the finding had its state changed,
-        #     the finding's state remained unchanged, or if the finding was added in any
-        #     state during the compare_duration period of time that precedes the
-        #     read_time. This is the time between (read_time - compare_duration) and
-        #     read_time.
-        #
-        #     The state_change value is derived based on the presence and state of the
-        #     finding at the two points in time. Intermediate state changes between the
-        #     two times don't affect the result. For example, the results aren't affected
-        #     if the finding is made inactive and then active again.
-        #
-        #     Possible "state_change" values when compare_duration is specified:
-        #
-        #     * "CHANGED":   indicates that the finding was present and matched the given
-        #       filter at the start of compare_duration, but changed its
-        #       state at read_time.
-        #     * "UNCHANGED": indicates that the finding was present and matched the given
-        #       filter at the start of compare_duration and did not change
-        #       state at read_time.
-        #     * "ADDED":     indicates that the finding did not match the given filter or
-        #       was not present at the start of compare_duration, but was
-        #       present at read_time.
-        #     * "REMOVED":   indicates that the finding was present and matched the
-        #       filter at the start of compare_duration, but did not match
-        #       the filter at read_time.
-        #
-        #     If compare_duration is not specified, then the only possible state_change
-        #     is "UNUSED", which will be the state_change set for all findings present at
-        #     read_time.
-        # @!attribute [rw] field_mask
-        #   @return [Google::Protobuf::FieldMask]
-        #     Optional. A field mask to specify the Finding fields to be listed in the
-        #     response. An empty field mask will list all fields.
-        # @!attribute [rw] page_token
-        #   @return [String]
-        #     The value returned by the last `ListFindingsResponse`; indicates
-        #     that this is a continuation of a prior `ListFindings` call, and
-        #     that the system should return the next page of data.
-        # @!attribute [rw] page_size
-        #   @return [Integer]
-        #     The maximum number of results to return in a single response. Default is
-        #     10, minimum is 1, maximum is 1000.
-        class ListFindingsRequest; end
-
-        # Response message for listing findings.
-        # @!attribute [rw] list_findings_results
-        #   @return [Array<Google::Cloud::SecurityCenter::V1::ListFindingsResponse::ListFindingsResult>]
-        #     Findings matching the list request.
-        # @!attribute [rw] read_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Time used for executing the list request.
-        # @!attribute [rw] next_page_token
-        #   @return [String]
-        #     Token to retrieve the next page of results, or empty if there are no more
-        #     results.
-        # @!attribute [rw] total_size
-        #   @return [Integer]
-        #     The total number of findings matching the query.
-        class ListFindingsResponse
-          # Result containing the Finding and its StateChange.
-          # @!attribute [rw] finding
-          #   @return [Google::Cloud::SecurityCenter::V1::Finding]
-          #     Finding matching the search request.
-          # @!attribute [rw] state_change
-          #   @return [Google::Cloud::SecurityCenter::V1::ListFindingsResponse::ListFindingsResult::StateChange]
-          #     State change of the finding between the points in time.
-          # @!attribute [rw] resource
-          #   @return [Google::Cloud::SecurityCenter::V1::ListFindingsResponse::ListFindingsResult::Resource]
-          #     Output only. Resource that is associated with this finding.
-          class ListFindingsResult
-            # Information related to the Google Cloud Platform (GCP) resource that is
-            # associated with this finding.
-            # @!attribute [rw] name
-            #   @return [String]
-            #     The full resource name of the resource. See:
-            #     https://cloud.google.com/apis/design/resource_names#full_resource_name
-            # @!attribute [rw] project_name
-            #   @return [String]
-            #     The full resource name of project that the resource belongs to.
-            # @!attribute [rw] project_display_name
-            #   @return [String]
-            #     The human readable name of project that the resource belongs to.
-            # @!attribute [rw] parent_name
-            #   @return [String]
-            #     The full resource name of resource's parent.
-            # @!attribute [rw] parent_display_name
-            #   @return [String]
-            #     The human readable name of resource's parent.
-            class Resource; end
-
-            # The change in state of the finding.
-            #
-            # When querying across two points in time this describes
-            # the change in the finding between the two points: CHANGED, UNCHANGED,
-            # ADDED, or REMOVED. Findings can not be deleted, so REMOVED implies that
-            # the finding at timestamp does not match the filter specified, but it did
-            # at timestamp - compare_duration. If there was no compare_duration
-            # supplied in the request the state change will be: UNUSED
-            module StateChange
-              # State change is unused, this is the canonical default for this enum.
-              UNUSED = 0
-
-              # The finding has changed state in some way between the points in time
-              # and existed at both points.
-              CHANGED = 1
-
-              # The finding has not changed state between the points in time and
-              # existed at both points.
-              UNCHANGED = 2
-
-              # The finding was created between the points in time.
-              ADDED = 3
-
-              # The finding at timestamp does not match the filter specified, but it
-              # did at timestamp - compare_duration.
-              REMOVED = 4
-            end
-          end
-        end
-
-        # Request message for updating a finding's state.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. The relative resource name of the finding. See:
-        #     https://cloud.google.com/apis/design/resource_names#relative_resource_name
-        #     Example:
-        #     "organizations/{organization_id}/sources/{source_id}/finding/{finding_id}".
-        # @!attribute [rw] state
-        #   @return [Google::Cloud::SecurityCenter::V1::Finding::State]
-        #     Required. The desired State of the finding.
-        # @!attribute [rw] start_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Required. The time at which the updated state takes effect.
-        class SetFindingStateRequest; end
-
-        # Request message for running asset discovery for an organization.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. Name of the organization to run asset discovery for. Its format
-        #     is "organizations/[organization_id]".
-        class RunAssetDiscoveryRequest; end
-
-        # Request message for updating or creating a finding.
-        # @!attribute [rw] finding
-        #   @return [Google::Cloud::SecurityCenter::V1::Finding]
-        #     Required. The finding resource to update or create if it does not already
-        #     exist. parent, security_marks, and update_time will be ignored.
-        #
-        #     In the case of creation, the finding id portion of the name must be
-        #     alphanumeric and less than or equal to 32 characters and greater than 0
-        #     characters in length.
-        # @!attribute [rw] update_mask
-        #   @return [Google::Protobuf::FieldMask]
-        #     The FieldMask to use when updating the finding resource. This field should
-        #     not be specified when creating a finding.
-        #
-        #     When updating a finding, an empty mask is treated as updating all mutable
-        #     fields and replacing source_properties.  Individual source_properties can
-        #     be added/updated by using "source_properties.<property key>" in the field
-        #     mask.
-        class UpdateFindingRequest; end
-
-        # Request message for updating a notification config.
-        # @!attribute [rw] notification_config
-        #   @return [Google::Cloud::SecurityCenter::V1::NotificationConfig]
-        #     Required. The notification config to update.
-        # @!attribute [rw] update_mask
-        #   @return [Google::Protobuf::FieldMask]
-        #     The FieldMask to use when updating the notification config.
-        #
-        #     If empty all mutable fields will be updated.
-        class UpdateNotificationConfigRequest; end
-
-        # Request message for updating an organization's settings.
-        # @!attribute [rw] organization_settings
-        #   @return [Google::Cloud::SecurityCenter::V1::OrganizationSettings]
-        #     Required. The organization settings resource to update.
-        # @!attribute [rw] update_mask
-        #   @return [Google::Protobuf::FieldMask]
-        #     The FieldMask to use when updating the settings resource.
-        #
-        #      If empty all mutable fields will be updated.
-        class UpdateOrganizationSettingsRequest; end
-
-        # Request message for updating a source.
-        # @!attribute [rw] source
-        #   @return [Google::Cloud::SecurityCenter::V1::Source]
-        #     Required. The source resource to update.
-        # @!attribute [rw] update_mask
-        #   @return [Google::Protobuf::FieldMask]
-        #     The FieldMask to use when updating the source resource.
-        #
-        #     If empty all mutable fields will be updated.
-        class UpdateSourceRequest; end
-
-        # Request message for updating a SecurityMarks resource.
-        # @!attribute [rw] security_marks
-        #   @return [Google::Cloud::SecurityCenter::V1::SecurityMarks]
-        #     Required. The security marks resource to update.
-        # @!attribute [rw] update_mask
-        #   @return [Google::Protobuf::FieldMask]
-        #     The FieldMask to use when updating the security marks resource.
-        #
-        #     The field mask must not contain duplicate fields.
-        #     If empty or set to "marks", all marks will be replaced.  Individual
-        #     marks can be updated using "marks.<mark_key>".
-        # @!attribute [rw] start_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     The time at which the updated SecurityMarks take effect.
-        #     If not set uses current server time.  Updates will be applied to the
-        #     SecurityMarks that are active immediately preceding this time.
-        class UpdateSecurityMarksRequest; end
-      end
-    end
-  end
-end