google-cloud-pubsub 1.10.0 → 2.0.0

data/lib/google/cloud/pubsub/v1/publisher_client_config.json

@@ -1,120 +0,0 @@
-{
-  "interfaces": {
-    "google.pubsub.v1.Publisher": {
-      "retry_codes": {
-        "idempotent": [
-          "ABORTED",
-          "UNAVAILABLE",
-          "UNKNOWN"
-        ],
-        "non_idempotent2": [],
-        "non_idempotent": [
-          "UNAVAILABLE"
-        ],
-        "idempotent2": [
-          "DEADLINE_EXCEEDED",
-          "UNAVAILABLE"
-        ],
-        "none": [],
-        "publish": [
-          "ABORTED",
-          "CANCELLED",
-          "DEADLINE_EXCEEDED",
-          "INTERNAL",
-          "RESOURCE_EXHAUSTED",
-          "UNAVAILABLE",
-          "UNKNOWN"
-        ]
-      },
-      "retry_params": {
-        "default": {
-          "initial_retry_delay_millis": 100,
-          "retry_delay_multiplier": 1.3,
-          "max_retry_delay_millis": 60000,
-          "initial_rpc_timeout_millis": 60000,
-          "rpc_timeout_multiplier": 1.0,
-          "max_rpc_timeout_millis": 60000,
-          "total_timeout_millis": 600000
-        },
-        "messaging": {
-          "initial_retry_delay_millis": 100,
-          "retry_delay_multiplier": 1.3,
-          "max_retry_delay_millis": 60000,
-          "initial_rpc_timeout_millis": 5000,
-          "rpc_timeout_multiplier": 1.3,
-          "max_rpc_timeout_millis": 60000,
-          "total_timeout_millis": 60000
-        }
-      },
-      "methods": {
-        "CreateTopic": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "UpdateTopic": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "Publish": {
-          "timeout_millis": 20000,
-          "retry_codes_name": "publish",
-          "retry_params_name": "messaging",
-          "bundling": {
-            "element_count_threshold": 100,
-            "element_count_limit": 1000,
-            "request_byte_threshold": 1048576,
-            "request_byte_limit": 10485760,
-            "delay_threshold_millis": 10
-          }
-        },
-        "GetTopic": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "ListTopics": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "ListTopicSubscriptions": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "ListTopicSnapshots": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent2",
-          "retry_params_name": "default"
-        },
-        "DeleteTopic": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "SetIamPolicy": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "GetIamPolicy": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "TestIamPermissions": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "DetachSubscription": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent2",
-          "retry_params_name": "default"
-        }
-      }
-    }
-  }
-}

data/lib/google/cloud/pubsub/v1/subscriber_client.rb

@@ -1,1466 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# EDITING INSTRUCTIONS
-# This file was generated from the file
-# https://github.com/googleapis/googleapis/blob/master/google/pubsub/v1/pubsub.proto,
-# and updates to that file get reflected here through a refresh process.
-# For the short term, the refresh process will only be runnable by Google
-# engineers.
-
-
-require "json"
-require "pathname"
-
-require "google/gax"
-
-require "google/iam/v1/iam_policy_pb"
-require "google/pubsub/v1/pubsub_pb"
-require "google/cloud/pubsub/v1/credentials"
-require "google/cloud/pubsub/version"
-
-module Google
-  module Cloud
-    module PubSub
-      module V1
-        # The service that an application uses to manipulate subscriptions and to
-        # consume messages from a subscription via the `Pull` method or by
-        # establishing a bi-directional stream using the `StreamingPull` method.
-        #
-        # @!attribute [r] iam_policy_stub
-        #   @return [Google::Iam::V1::IAMPolicy::Stub]
-        # @!attribute [r] subscriber_stub
-        #   @return [Google::Cloud::PubSub::V1::Subscriber::Stub]
-        class SubscriberClient
-          # @private
-          attr_reader :iam_policy_stub, :subscriber_stub
-
-          # The default address of the service.
-          SERVICE_ADDRESS = "pubsub.googleapis.com".freeze
-
-          # The default port of the service.
-          DEFAULT_SERVICE_PORT = 443
-
-          # The default set of gRPC interceptors.
-          GRPC_INTERCEPTORS = []
-
-          DEFAULT_TIMEOUT = 30
-
-          PAGE_DESCRIPTORS = {
-            "list_subscriptions" => Google::Gax::PageDescriptor.new(
-              "page_token",
-              "next_page_token",
-              "subscriptions"),
-            "list_snapshots" => Google::Gax::PageDescriptor.new(
-              "page_token",
-              "next_page_token",
-              "snapshots")
-          }.freeze
-
-          private_constant :PAGE_DESCRIPTORS
-
-          # The scopes needed to make gRPC calls to all of the methods defined in
-          # this service.
-          ALL_SCOPES = [
-            "https://www.googleapis.com/auth/cloud-platform",
-            "https://www.googleapis.com/auth/pubsub"
-          ].freeze
-
-
-          PROJECT_PATH_TEMPLATE = Google::Gax::PathTemplate.new(
-            "projects/{project}"
-          )
-
-          private_constant :PROJECT_PATH_TEMPLATE
-
-          SNAPSHOT_PATH_TEMPLATE = Google::Gax::PathTemplate.new(
-            "projects/{project}/snapshots/{snapshot}"
-          )
-
-          private_constant :SNAPSHOT_PATH_TEMPLATE
-
-          SUBSCRIPTION_PATH_TEMPLATE = Google::Gax::PathTemplate.new(
-            "projects/{project}/subscriptions/{subscription}"
-          )
-
-          private_constant :SUBSCRIPTION_PATH_TEMPLATE
-
-          TOPIC_PATH_TEMPLATE = Google::Gax::PathTemplate.new(
-            "projects/{project}/topics/{topic}"
-          )
-
-          private_constant :TOPIC_PATH_TEMPLATE
-
-          # Returns a fully-qualified project resource name string.
-          # @param project [String]
-          # @return [String]
-          def self.project_path project
-            PROJECT_PATH_TEMPLATE.render(
-              :"project" => project
-            )
-          end
-
-          # Returns a fully-qualified snapshot resource name string.
-          # @param project [String]
-          # @param snapshot [String]
-          # @return [String]
-          def self.snapshot_path project, snapshot
-            SNAPSHOT_PATH_TEMPLATE.render(
-              :"project" => project,
-              :"snapshot" => snapshot
-            )
-          end
-
-          # Returns a fully-qualified subscription resource name string.
-          # @param project [String]
-          # @param subscription [String]
-          # @return [String]
-          def self.subscription_path project, subscription
-            SUBSCRIPTION_PATH_TEMPLATE.render(
-              :"project" => project,
-              :"subscription" => subscription
-            )
-          end
-
-          # Returns a fully-qualified topic resource name string.
-          # @param project [String]
-          # @param topic [String]
-          # @return [String]
-          def self.topic_path project, topic
-            TOPIC_PATH_TEMPLATE.render(
-              :"project" => project,
-              :"topic" => topic
-            )
-          end
-
-          # @param credentials [Google::Auth::Credentials, String, Hash, GRPC::Core::Channel, GRPC::Core::ChannelCredentials, Proc]
-          #   Provides the means for authenticating requests made by the client. This parameter can
-          #   be many types.
-          #   A `Google::Auth::Credentials` uses a the properties of its represented keyfile for
-          #   authenticating requests made by this client.
-          #   A `String` will be treated as the path to the keyfile to be used for the construction of
-          #   credentials for this client.
-          #   A `Hash` will be treated as the contents of a keyfile to be used for the construction of
-          #   credentials for this client.
-          #   A `GRPC::Core::Channel` will be used to make calls through.
-          #   A `GRPC::Core::ChannelCredentials` for the setting up the RPC client. The channel credentials
-          #   should already be composed with a `GRPC::Core::CallCredentials` object.
-          #   A `Proc` will be used as an updater_proc for the Grpc channel. The proc transforms the
-          #   metadata for requests, generally, to give OAuth credentials.
-          # @param scopes [Array<String>]
-          #   The OAuth scopes for this service. This parameter is ignored if
-          #   an updater_proc is supplied.
-          # @param client_config [Hash]
-          #   A Hash for call options for each method. See
-          #   Google::Gax#construct_settings for the structure of
-          #   this data. Falls back to the default config if not specified
-          #   or the specified config is missing data points.
-          # @param timeout [Numeric]
-          #   The default timeout, in seconds, for calls made through this client.
-          # @param metadata [Hash]
-          #   Default metadata to be sent with each request. This can be overridden on a per call basis.
-          # @param service_address [String]
-          #   Override for the service hostname, or `nil` to leave as the default.
-          # @param service_port [Integer]
-          #   Override for the service port, or `nil` to leave as the default.
-          # @param exception_transformer [Proc]
-          #   An optional proc that intercepts any exceptions raised during an API call to inject
-          #   custom error handling.
-          def initialize \
-              credentials: nil,
-              scopes: ALL_SCOPES,
-              client_config: {},
-              timeout: DEFAULT_TIMEOUT,
-              metadata: nil,
-              service_address: nil,
-              service_port: nil,
-              exception_transformer: nil,
-              lib_name: nil,
-              lib_version: ""
-            # These require statements are intentionally placed here to initialize
-            # the gRPC module only when it's required.
-            # See https://github.com/googleapis/toolkit/issues/446
-            require "google/gax/grpc"
-            require "google/iam/v1/iam_policy_services_pb"
-            require "google/pubsub/v1/pubsub_services_pb"
-
-            credentials ||= Google::Cloud::PubSub::V1::Credentials.default
-
-            if credentials.is_a?(String) || credentials.is_a?(Hash)
-              updater_proc = Google::Cloud::PubSub::V1::Credentials.new(credentials).updater_proc
-            end
-            if credentials.is_a?(GRPC::Core::Channel)
-              channel = credentials
-            end
-            if credentials.is_a?(GRPC::Core::ChannelCredentials)
-              chan_creds = credentials
-            end
-            if credentials.is_a?(Proc)
-              updater_proc = credentials
-            end
-            if credentials.is_a?(Google::Auth::Credentials)
-              updater_proc = credentials.updater_proc
-            end
-
-            package_version = Google::Cloud::PubSub::VERSION
-
-            google_api_client = "gl-ruby/#{RUBY_VERSION}"
-            google_api_client << " #{lib_name}/#{lib_version}" if lib_name
-            google_api_client << " gapic/#{package_version} gax/#{Google::Gax::VERSION}"
-            google_api_client << " grpc/#{GRPC::VERSION}"
-            google_api_client.freeze
-
-            headers = { :"x-goog-api-client" => google_api_client }
-            if credentials.respond_to?(:quota_project_id) && credentials.quota_project_id
-              headers[:"x-goog-user-project"] = credentials.quota_project_id
-            end
-            headers.merge!(metadata) unless metadata.nil?
-            client_config_file = Pathname.new(__dir__).join(
-              "subscriber_client_config.json"
-            )
-            defaults = client_config_file.open do |f|
-              Google::Gax.construct_settings(
-                "google.pubsub.v1.Subscriber",
-                JSON.parse(f.read),
-                client_config,
-                Google::Gax::Grpc::STATUS_CODE_NAMES,
-                timeout,
-                page_descriptors: PAGE_DESCRIPTORS,
-                errors: Google::Gax::Grpc::API_ERRORS,
-                metadata: headers
-              )
-            end
-
-            # Allow overriding the service path/port in subclasses.
-            service_path = service_address || self.class::SERVICE_ADDRESS
-            port = service_port || self.class::DEFAULT_SERVICE_PORT
-            interceptors = self.class::GRPC_INTERCEPTORS
-            @iam_policy_stub = Google::Gax::Grpc.create_stub(
-              service_path,
-              port,
-              chan_creds: chan_creds,
-              channel: channel,
-              updater_proc: updater_proc,
-              scopes: scopes,
-              interceptors: interceptors,
-              &Google::Iam::V1::IAMPolicy::Stub.method(:new)
-            )
-            @subscriber_stub = Google::Gax::Grpc.create_stub(
-              service_path,
-              port,
-              chan_creds: chan_creds,
-              channel: channel,
-              updater_proc: updater_proc,
-              scopes: scopes,
-              interceptors: interceptors,
-              &Google::Cloud::PubSub::V1::Subscriber::Stub.method(:new)
-            )
-
-            @create_subscription = Google::Gax.create_api_call(
-              @subscriber_stub.method(:create_subscription),
-              defaults["create_subscription"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'name' => request.name}
-              end
-            )
-            @get_subscription = Google::Gax.create_api_call(
-              @subscriber_stub.method(:get_subscription),
-              defaults["get_subscription"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'subscription' => request.subscription}
-              end
-            )
-            @update_subscription = Google::Gax.create_api_call(
-              @subscriber_stub.method(:update_subscription),
-              defaults["update_subscription"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'subscription.name' => request.subscription.name}
-              end
-            )
-            @list_subscriptions = Google::Gax.create_api_call(
-              @subscriber_stub.method(:list_subscriptions),
-              defaults["list_subscriptions"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'project' => request.project}
-              end
-            )
-            @delete_subscription = Google::Gax.create_api_call(
-              @subscriber_stub.method(:delete_subscription),
-              defaults["delete_subscription"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'subscription' => request.subscription}
-              end
-            )
-            @get_snapshot = Google::Gax.create_api_call(
-              @subscriber_stub.method(:get_snapshot),
-              defaults["get_snapshot"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'snapshot' => request.snapshot}
-              end
-            )
-            @modify_ack_deadline = Google::Gax.create_api_call(
-              @subscriber_stub.method(:modify_ack_deadline),
-              defaults["modify_ack_deadline"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'subscription' => request.subscription}
-              end
-            )
-            @acknowledge = Google::Gax.create_api_call(
-              @subscriber_stub.method(:acknowledge),
-              defaults["acknowledge"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'subscription' => request.subscription}
-              end
-            )
-            @pull = Google::Gax.create_api_call(
-              @subscriber_stub.method(:pull),
-              defaults["pull"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'subscription' => request.subscription}
-              end
-            )
-            @streaming_pull = Google::Gax.create_api_call(
-              @subscriber_stub.method(:streaming_pull),
-              defaults["streaming_pull"],
-              exception_transformer: exception_transformer
-            )
-            @modify_push_config = Google::Gax.create_api_call(
-              @subscriber_stub.method(:modify_push_config),
-              defaults["modify_push_config"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'subscription' => request.subscription}
-              end
-            )
-            @list_snapshots = Google::Gax.create_api_call(
-              @subscriber_stub.method(:list_snapshots),
-              defaults["list_snapshots"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'project' => request.project}
-              end
-            )
-            @create_snapshot = Google::Gax.create_api_call(
-              @subscriber_stub.method(:create_snapshot),
-              defaults["create_snapshot"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'name' => request.name}
-              end
-            )
-            @update_snapshot = Google::Gax.create_api_call(
-              @subscriber_stub.method(:update_snapshot),
-              defaults["update_snapshot"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'snapshot.name' => request.snapshot.name}
-              end
-            )
-            @delete_snapshot = Google::Gax.create_api_call(
-              @subscriber_stub.method(:delete_snapshot),
-              defaults["delete_snapshot"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'snapshot' => request.snapshot}
-              end
-            )
-            @seek = Google::Gax.create_api_call(
-              @subscriber_stub.method(:seek),
-              defaults["seek"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'subscription' => request.subscription}
-              end
-            )
-            @set_iam_policy = Google::Gax.create_api_call(
-              @iam_policy_stub.method(:set_iam_policy),
-              defaults["set_iam_policy"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'resource' => request.resource}
-              end
-            )
-            @get_iam_policy = Google::Gax.create_api_call(
-              @iam_policy_stub.method(:get_iam_policy),
-              defaults["get_iam_policy"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'resource' => request.resource}
-              end
-            )
-            @test_iam_permissions = Google::Gax.create_api_call(
-              @iam_policy_stub.method(:test_iam_permissions),
-              defaults["test_iam_permissions"],
-              exception_transformer: exception_transformer,
-              params_extractor: proc do |request|
-                {'resource' => request.resource}
-              end
-            )
-          end
-
-          # Service calls
-
-          # Creates a subscription to a given topic. See the
-          # <a href="https://cloud.google.com/pubsub/docs/admin#resource_names">
-          # resource name rules</a>.
-          # If the subscription already exists, returns `ALREADY_EXISTS`.
-          # If the corresponding topic doesn't exist, returns `NOT_FOUND`.
-          #
-          # If the name is not provided in the request, the server will assign a random
-          # name for this subscription on the same project as the topic, conforming
-          # to the
-          # [resource name
-          # format](https://cloud.google.com/pubsub/docs/admin#resource_names). The
-          # generated name is populated in the returned Subscription object. Note that
-          # for REST API requests, you must specify a name in the request.
-          #
-          # @param name [String]
-          #   Required. The name of the subscription. It must have the format
-          #   `"projects/{project}/subscriptions/{subscription}"`. `{subscription}` must
-          #   start with a letter, and contain only letters (`[A-Za-z]`), numbers
-          #   (`[0-9]`), dashes (`-`), underscores (`_`), periods (`.`), tildes (`~`),
-          #   plus (`+`) or percent signs (`%`). It must be between 3 and 255 characters
-          #   in length, and it must not start with `"goog"`.
-          # @param topic [String]
-          #   Required. The name of the topic from which this subscription is receiving
-          #   messages. Format is `projects/{project}/topics/{topic}`. The value of this
-          #   field will be `_deleted-topic_` if the topic has been deleted.
-          # @param push_config [Google::Cloud::PubSub::V1::PushConfig | Hash]
-          #   If push delivery is used with this subscription, this field is
-          #   used to configure it. An empty `pushConfig` signifies that the subscriber
-          #   will pull and ack messages using API methods.
-          #   A hash of the same form as `Google::Cloud::PubSub::V1::PushConfig`
-          #   can also be provided.
-          # @param ack_deadline_seconds [Integer]
-          #   The approximate amount of time (on a best-effort basis) Pub/Sub waits for
-          #   the subscriber to acknowledge receipt before resending the message. In the
-          #   interval after the message is delivered and before it is acknowledged, it
-          #   is considered to be <i>outstanding</i>. During that time period, the
-          #   message will not be redelivered (on a best-effort basis).
-          #
-          #   For pull subscriptions, this value is used as the initial value for the ack
-          #   deadline. To override this value for a given message, call
-          #   `ModifyAckDeadline` with the corresponding `ack_id` if using
-          #   non-streaming pull or send the `ack_id` in a
-          #   `StreamingModifyAckDeadlineRequest` if using streaming pull.
-          #   The minimum custom deadline you can specify is 10 seconds.
-          #   The maximum custom deadline you can specify is 600 seconds (10 minutes).
-          #   If this parameter is 0, a default value of 10 seconds is used.
-          #
-          #   For push delivery, this value is also used to set the request timeout for
-          #   the call to the push endpoint.
-          #
-          #   If the subscriber never acknowledges the message, the Pub/Sub
-          #   system will eventually redeliver the message.
-          # @param retain_acked_messages [true, false]
-          #   Indicates whether to retain acknowledged messages. If true, then
-          #   messages are not expunged from the subscription's backlog, even if they are
-          #   acknowledged, until they fall out of the `message_retention_duration`
-          #   window. This must be true if you would like to
-          #   <a
-          #   href="https://cloud.google.com/pubsub/docs/replay-overview#seek_to_a_time">
-          #   Seek to a timestamp</a>.
-          # @param message_retention_duration [Google::Protobuf::Duration | Hash]
-          #   How long to retain unacknowledged messages in the subscription's backlog,
-          #   from the moment a message is published.
-          #   If `retain_acked_messages` is true, then this also configures the retention
-          #   of acknowledged messages, and thus configures how far back in time a `Seek`
-          #   can be done. Defaults to 7 days. Cannot be more than 7 days or less than 10
-          #   minutes.
-          #   A hash of the same form as `Google::Protobuf::Duration`
-          #   can also be provided.
-          # @param labels [Hash{String => String}]
-          #   See <a href="https://cloud.google.com/pubsub/docs/labels"> Creating and
-          #   managing labels</a>.
-          # @param enable_message_ordering [true, false]
-          #   If true, messages published with the same `ordering_key` in `PubsubMessage`
-          #   will be delivered to the subscribers in the order in which they
-          #   are received by the Pub/Sub system. Otherwise, they may be delivered in
-          #   any order.
-          #   <b>EXPERIMENTAL:</b> This feature is part of a closed alpha release. This
-          #   API might be changed in backward-incompatible ways and is not recommended
-          #   for production use. It is not subject to any SLA or deprecation policy.
-          # @param expiration_policy [Google::Cloud::PubSub::V1::ExpirationPolicy | Hash]
-          #   A policy that specifies the conditions for this subscription's expiration.
-          #   A subscription is considered active as long as any connected subscriber is
-          #   successfully consuming messages from the subscription or is issuing
-          #   operations on the subscription. If `expiration_policy` is not set, a
-          #   *default policy* with `ttl` of 31 days will be used. The minimum allowed
-          #   value for `expiration_policy.ttl` is 1 day.
-          #   A hash of the same form as `Google::Cloud::PubSub::V1::ExpirationPolicy`
-          #   can also be provided.
-          # @param filter [String]
-          #   An expression written in the Pub/Sub [filter
-          #   language](https://cloud.google.com/pubsub/docs/filtering). If non-empty,
-          #   then only `PubsubMessage`s whose `attributes` field matches the filter are
-          #   delivered on this subscription. If empty, then no messages are filtered
-          #   out.
-          # @param dead_letter_policy [Google::Cloud::PubSub::V1::DeadLetterPolicy | Hash]
-          #   A policy that specifies the conditions for dead lettering messages in
-          #   this subscription. If dead_letter_policy is not set, dead lettering
-          #   is disabled.
-          #
-          #   The Cloud Pub/Sub service account associated with this subscriptions's
-          #   parent project (i.e.,
-          #   service-\\{project_number}@gcp-sa-pubsub.iam.gserviceaccount.com) must have
-          #   permission to Acknowledge() messages on this subscription.
-          #   A hash of the same form as `Google::Cloud::PubSub::V1::DeadLetterPolicy`
-          #   can also be provided.
-          # @param retry_policy [Google::Cloud::PubSub::V1::RetryPolicy | Hash]
-          #   A policy that specifies how Pub/Sub retries message delivery for this
-          #   subscription.
-          #
-          #   If not set, the default retry policy is applied. This generally implies
-          #   that messages will be retried as soon as possible for healthy subscribers.
-          #   RetryPolicy will be triggered on NACKs or acknowledgement deadline
-          #   exceeded events for a given message.
-          #   A hash of the same form as `Google::Cloud::PubSub::V1::RetryPolicy`
-          #   can also be provided.
-          # @param detached [true, false]
-          #   Indicates whether the subscription is detached from its topic. Detached
-          #   subscriptions don't receive messages from their topic and don't retain any
-          #   backlog. `Pull` and `StreamingPull` requests will return
-          #   FAILED_PRECONDITION. If the subscription is a push subscription, pushes to
-          #   the endpoint will not be made.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result [Google::Cloud::PubSub::V1::Subscription]
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @return [Google::Cloud::PubSub::V1::Subscription]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   formatted_name = Google::Cloud::PubSub::V1::SubscriberClient.subscription_path("[PROJECT]", "[SUBSCRIPTION]")
-          #   formatted_topic = Google::Cloud::PubSub::V1::SubscriberClient.topic_path("[PROJECT]", "[TOPIC]")
-          #   response = subscriber_client.create_subscription(formatted_name, formatted_topic)
-
-          def create_subscription \
-              name,
-              topic,
-              push_config: nil,
-              ack_deadline_seconds: nil,
-              retain_acked_messages: nil,
-              message_retention_duration: nil,
-              labels: nil,
-              enable_message_ordering: nil,
-              expiration_policy: nil,
-              filter: nil,
-              dead_letter_policy: nil,
-              retry_policy: nil,
-              detached: nil,
-              options: nil,
-              &block
-            req = {
-              name: name,
-              topic: topic,
-              push_config: push_config,
-              ack_deadline_seconds: ack_deadline_seconds,
-              retain_acked_messages: retain_acked_messages,
-              message_retention_duration: message_retention_duration,
-              labels: labels,
-              enable_message_ordering: enable_message_ordering,
-              expiration_policy: expiration_policy,
-              filter: filter,
-              dead_letter_policy: dead_letter_policy,
-              retry_policy: retry_policy,
-              detached: detached
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::Subscription)
-            @create_subscription.call(req, options, &block)
-          end
-
-          # Gets the configuration details of a subscription.
-          #
-          # @param subscription [String]
-          #   Required. The name of the subscription to get.
-          #   Format is `projects/{project}/subscriptions/{sub}`.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result [Google::Cloud::PubSub::V1::Subscription]
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @return [Google::Cloud::PubSub::V1::Subscription]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   formatted_subscription = Google::Cloud::PubSub::V1::SubscriberClient.subscription_path("[PROJECT]", "[SUBSCRIPTION]")
-          #   response = subscriber_client.get_subscription(formatted_subscription)
-
-          def get_subscription \
-              subscription,
-              options: nil,
-              &block
-            req = {
-              subscription: subscription
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::GetSubscriptionRequest)
-            @get_subscription.call(req, options, &block)
-          end
-
-          # Updates an existing subscription. Note that certain properties of a
-          # subscription, such as its topic, are not modifiable.
-          #
-          # @param subscription [Google::Cloud::PubSub::V1::Subscription | Hash]
-          #   Required. The updated subscription object.
-          #   A hash of the same form as `Google::Cloud::PubSub::V1::Subscription`
-          #   can also be provided.
-          # @param update_mask [Google::Protobuf::FieldMask | Hash]
-          #   Required. Indicates which fields in the provided subscription to update.
-          #   Must be specified and non-empty.
-          #   A hash of the same form as `Google::Protobuf::FieldMask`
-          #   can also be provided.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result [Google::Cloud::PubSub::V1::Subscription]
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @return [Google::Cloud::PubSub::V1::Subscription]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   ack_deadline_seconds = 42
-          #   subscription = { ack_deadline_seconds: ack_deadline_seconds }
-          #   paths_element = "ack_deadline_seconds"
-          #   paths = [paths_element]
-          #   update_mask = { paths: paths }
-          #   response = subscriber_client.update_subscription(subscription, update_mask)
-
-          def update_subscription \
-              subscription,
-              update_mask,
-              options: nil,
-              &block
-            req = {
-              subscription: subscription,
-              update_mask: update_mask
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::UpdateSubscriptionRequest)
-            @update_subscription.call(req, options, &block)
-          end
-
-          # Lists matching subscriptions.
-          #
-          # @param project [String]
-          #   Required. The name of the project in which to list subscriptions.
-          #   Format is `projects/{project-id}`.
-          # @param page_size [Integer]
-          #   The maximum number of resources contained in the underlying API
-          #   response. If page streaming is performed per-resource, this
-          #   parameter does not affect the return value. If page streaming is
-          #   performed per-page, this determines the maximum number of
-          #   resources in a page.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result [Google::Gax::PagedEnumerable<Google::Cloud::PubSub::V1::Subscription>]
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @return [Google::Gax::PagedEnumerable<Google::Cloud::PubSub::V1::Subscription>]
-          #   An enumerable of Google::Cloud::PubSub::V1::Subscription instances.
-          #   See Google::Gax::PagedEnumerable documentation for other
-          #   operations such as per-page iteration or access to the response
-          #   object.
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   formatted_project = Google::Cloud::PubSub::V1::SubscriberClient.project_path("[PROJECT]")
-          #
-          #   # Iterate over all results.
-          #   subscriber_client.list_subscriptions(formatted_project).each do |element|
-          #     # Process element.
-          #   end
-          #
-          #   # Or iterate over results one page at a time.
-          #   subscriber_client.list_subscriptions(formatted_project).each_page do |page|
-          #     # Process each page at a time.
-          #     page.each do |element|
-          #       # Process element.
-          #     end
-          #   end
-
-          def list_subscriptions \
-              project,
-              page_size: nil,
-              options: nil,
-              &block
-            req = {
-              project: project,
-              page_size: page_size
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::ListSubscriptionsRequest)
-            @list_subscriptions.call(req, options, &block)
-          end
-
-          # Deletes an existing subscription. All messages retained in the subscription
-          # are immediately dropped. Calls to `Pull` after deletion will return
-          # `NOT_FOUND`. After a subscription is deleted, a new one may be created with
-          # the same name, but the new one has no association with the old
-          # subscription or its topic unless the same topic is specified.
-          #
-          # @param subscription [String]
-          #   Required. The subscription to delete.
-          #   Format is `projects/{project}/subscriptions/{sub}`.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result []
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   formatted_subscription = Google::Cloud::PubSub::V1::SubscriberClient.subscription_path("[PROJECT]", "[SUBSCRIPTION]")
-          #   subscriber_client.delete_subscription(formatted_subscription)
-
-          def delete_subscription \
-              subscription,
-              options: nil,
-              &block
-            req = {
-              subscription: subscription
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::DeleteSubscriptionRequest)
-            @delete_subscription.call(req, options, &block)
-            nil
-          end
-
-          # Gets the configuration details of a snapshot. Snapshots are used in
-          # <a href="https://cloud.google.com/pubsub/docs/replay-overview">Seek</a>
-          # operations, which allow you to manage message acknowledgments in bulk. That
-          # is, you can set the acknowledgment state of messages in an existing
-          # subscription to the state captured by a snapshot.
-          #
-          # @param snapshot [String]
-          #   Required. The name of the snapshot to get.
-          #   Format is `projects/{project}/snapshots/{snap}`.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result [Google::Cloud::PubSub::V1::Snapshot]
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @return [Google::Cloud::PubSub::V1::Snapshot]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   formatted_snapshot = Google::Cloud::PubSub::V1::SubscriberClient.snapshot_path("[PROJECT]", "[SNAPSHOT]")
-          #   response = subscriber_client.get_snapshot(formatted_snapshot)
-
-          def get_snapshot \
-              snapshot,
-              options: nil,
-              &block
-            req = {
-              snapshot: snapshot
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::GetSnapshotRequest)
-            @get_snapshot.call(req, options, &block)
-          end
-
-          # Modifies the ack deadline for a specific message. This method is useful
-          # to indicate that more time is needed to process a message by the
-          # subscriber, or to make the message available for redelivery if the
-          # processing was interrupted. Note that this does not modify the
-          # subscription-level `ackDeadlineSeconds` used for subsequent messages.
-          #
-          # @param subscription [String]
-          #   Required. The name of the subscription.
-          #   Format is `projects/{project}/subscriptions/{sub}`.
-          # @param ack_ids [Array<String>]
-          #   Required. List of acknowledgment IDs.
-          # @param ack_deadline_seconds [Integer]
-          #   Required. The new ack deadline with respect to the time this request was
-          #   sent to the Pub/Sub system. For example, if the value is 10, the new ack
-          #   deadline will expire 10 seconds after the `ModifyAckDeadline` call was
-          #   made. Specifying zero might immediately make the message available for
-          #   delivery to another subscriber client. This typically results in an
-          #   increase in the rate of message redeliveries (that is, duplicates).
-          #   The minimum deadline you can specify is 0 seconds.
-          #   The maximum deadline you can specify is 600 seconds (10 minutes).
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result []
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   formatted_subscription = Google::Cloud::PubSub::V1::SubscriberClient.subscription_path("[PROJECT]", "[SUBSCRIPTION]")
-          #
-          #   # TODO: Initialize `ack_ids`:
-          #   ack_ids = []
-          #
-          #   # TODO: Initialize `ack_deadline_seconds`:
-          #   ack_deadline_seconds = 0
-          #   subscriber_client.modify_ack_deadline(formatted_subscription, ack_ids, ack_deadline_seconds)
-
-          def modify_ack_deadline \
-              subscription,
-              ack_ids,
-              ack_deadline_seconds,
-              options: nil,
-              &block
-            req = {
-              subscription: subscription,
-              ack_ids: ack_ids,
-              ack_deadline_seconds: ack_deadline_seconds
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::ModifyAckDeadlineRequest)
-            @modify_ack_deadline.call(req, options, &block)
-            nil
-          end
-
-          # Acknowledges the messages associated with the `ack_ids` in the
-          # `AcknowledgeRequest`. The Pub/Sub system can remove the relevant messages
-          # from the subscription.
-          #
-          # Acknowledging a message whose ack deadline has expired may succeed,
-          # but such a message may be redelivered later. Acknowledging a message more
-          # than once will not result in an error.
-          #
-          # @param subscription [String]
-          #   Required. The subscription whose message is being acknowledged.
-          #   Format is `projects/{project}/subscriptions/{sub}`.
-          # @param ack_ids [Array<String>]
-          #   Required. The acknowledgment ID for the messages being acknowledged that
-          #   was returned by the Pub/Sub system in the `Pull` response. Must not be
-          #   empty.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result []
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   formatted_subscription = Google::Cloud::PubSub::V1::SubscriberClient.subscription_path("[PROJECT]", "[SUBSCRIPTION]")
-          #
-          #   # TODO: Initialize `ack_ids`:
-          #   ack_ids = []
-          #   subscriber_client.acknowledge(formatted_subscription, ack_ids)
-
-          def acknowledge \
-              subscription,
-              ack_ids,
-              options: nil,
-              &block
-            req = {
-              subscription: subscription,
-              ack_ids: ack_ids
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::AcknowledgeRequest)
-            @acknowledge.call(req, options, &block)
-            nil
-          end
-
-          # Pulls messages from the server. The server may return `UNAVAILABLE` if
-          # there are too many concurrent pull requests pending for the given
-          # subscription.
-          #
-          # @param subscription [String]
-          #   Required. The subscription from which messages should be pulled.
-          #   Format is `projects/{project}/subscriptions/{sub}`.
-          # @param max_messages [Integer]
-          #   Required. The maximum number of messages to return for this request. Must
-          #   be a positive integer. The Pub/Sub system may return fewer than the number
-          #   specified.
-          # @param return_immediately [true, false]
-          #   Optional. If this field set to true, the system will respond immediately
-          #   even if it there are no messages available to return in the `Pull`
-          #   response. Otherwise, the system may wait (for a bounded amount of time)
-          #   until at least one message is available, rather than returning no messages.
-          #   Warning: setting this field to `true` is discouraged because it adversely
-          #   impacts the performance of `Pull` operations. We recommend that users do
-          #   not set this field.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result [Google::Cloud::PubSub::V1::PullResponse]
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @return [Google::Cloud::PubSub::V1::PullResponse]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   formatted_subscription = Google::Cloud::PubSub::V1::SubscriberClient.subscription_path("[PROJECT]", "[SUBSCRIPTION]")
-          #
-          #   # TODO: Initialize `max_messages`:
-          #   max_messages = 0
-          #   response = subscriber_client.pull(formatted_subscription, max_messages)
-
-          def pull \
-              subscription,
-              max_messages,
-              return_immediately: nil,
-              options: nil,
-              &block
-            req = {
-              subscription: subscription,
-              max_messages: max_messages,
-              return_immediately: return_immediately
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::PullRequest)
-            @pull.call(req, options, &block)
-          end
-
-          # Establishes a stream with the server, which sends messages down to the
-          # client. The client streams acknowledgements and ack deadline modifications
-          # back to the server. The server will close the stream and return the status
-          # on any error. The server may close the stream with status `UNAVAILABLE` to
-          # reassign server-side resources, in which case, the client should
-          # re-establish the stream. Flow control can be achieved by configuring the
-          # underlying RPC channel.
-          #
-          # @param reqs [Enumerable<Google::Cloud::PubSub::V1::StreamingPullRequest>]
-          #   The input requests.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @return [Enumerable<Google::Cloud::PubSub::V1::StreamingPullResponse>]
-          #   An enumerable of Google::Cloud::PubSub::V1::StreamingPullResponse instances.
-          #
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          #
-          # @note
-          #   EXPERIMENTAL:
-          #     Streaming requests are still undergoing review.
-          #     This method interface might change in the future.
-          #
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   formatted_subscription = Google::Cloud::PubSub::V1::SubscriberClient.subscription_path("[PROJECT]", "[SUBSCRIPTION]")
-          #
-          #   # TODO: Initialize `stream_ack_deadline_seconds`:
-          #   stream_ack_deadline_seconds = 0
-          #   request = { subscription: formatted_subscription, stream_ack_deadline_seconds: stream_ack_deadline_seconds }
-          #   requests = [request]
-          #   subscriber_client.streaming_pull(requests).each do |element|
-          #     # Process element.
-          #   end
-
-          def streaming_pull reqs, options: nil
-            request_protos = reqs.lazy.map do |req|
-              Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::StreamingPullRequest)
-            end
-            @streaming_pull.call(request_protos, options)
-          end
-
-          # Modifies the `PushConfig` for a specified subscription.
-          #
-          # This may be used to change a push subscription to a pull one (signified by
-          # an empty `PushConfig`) or vice versa, or change the endpoint URL and other
-          # attributes of a push subscription. Messages will accumulate for delivery
-          # continuously through the call regardless of changes to the `PushConfig`.
-          #
-          # @param subscription [String]
-          #   Required. The name of the subscription.
-          #   Format is `projects/{project}/subscriptions/{sub}`.
-          # @param push_config [Google::Cloud::PubSub::V1::PushConfig | Hash]
-          #   Required. The push configuration for future deliveries.
-          #
-          #   An empty `pushConfig` indicates that the Pub/Sub system should
-          #   stop pushing messages from the given subscription and allow
-          #   messages to be pulled and acknowledged - effectively pausing
-          #   the subscription if `Pull` or `StreamingPull` is not called.
-          #   A hash of the same form as `Google::Cloud::PubSub::V1::PushConfig`
-          #   can also be provided.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result []
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   formatted_subscription = Google::Cloud::PubSub::V1::SubscriberClient.subscription_path("[PROJECT]", "[SUBSCRIPTION]")
-          #
-          #   # TODO: Initialize `push_config`:
-          #   push_config = {}
-          #   subscriber_client.modify_push_config(formatted_subscription, push_config)
-
-          def modify_push_config \
-              subscription,
-              push_config,
-              options: nil,
-              &block
-            req = {
-              subscription: subscription,
-              push_config: push_config
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::ModifyPushConfigRequest)
-            @modify_push_config.call(req, options, &block)
-            nil
-          end
-
-          # Lists the existing snapshots. Snapshots are used in
-          # <a href="https://cloud.google.com/pubsub/docs/replay-overview">Seek</a>
-          # operations, which allow
-          # you to manage message acknowledgments in bulk. That is, you can set the
-          # acknowledgment state of messages in an existing subscription to the state
-          # captured by a snapshot.
-          #
-          # @param project [String]
-          #   Required. The name of the project in which to list snapshots.
-          #   Format is `projects/{project-id}`.
-          # @param page_size [Integer]
-          #   The maximum number of resources contained in the underlying API
-          #   response. If page streaming is performed per-resource, this
-          #   parameter does not affect the return value. If page streaming is
-          #   performed per-page, this determines the maximum number of
-          #   resources in a page.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result [Google::Gax::PagedEnumerable<Google::Cloud::PubSub::V1::Snapshot>]
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @return [Google::Gax::PagedEnumerable<Google::Cloud::PubSub::V1::Snapshot>]
-          #   An enumerable of Google::Cloud::PubSub::V1::Snapshot instances.
-          #   See Google::Gax::PagedEnumerable documentation for other
-          #   operations such as per-page iteration or access to the response
-          #   object.
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   formatted_project = Google::Cloud::PubSub::V1::SubscriberClient.project_path("[PROJECT]")
-          #
-          #   # Iterate over all results.
-          #   subscriber_client.list_snapshots(formatted_project).each do |element|
-          #     # Process element.
-          #   end
-          #
-          #   # Or iterate over results one page at a time.
-          #   subscriber_client.list_snapshots(formatted_project).each_page do |page|
-          #     # Process each page at a time.
-          #     page.each do |element|
-          #       # Process element.
-          #     end
-          #   end
-
-          def list_snapshots \
-              project,
-              page_size: nil,
-              options: nil,
-              &block
-            req = {
-              project: project,
-              page_size: page_size
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::ListSnapshotsRequest)
-            @list_snapshots.call(req, options, &block)
-          end
-
-          # Creates a snapshot from the requested subscription. Snapshots are used in
-          # <a href="https://cloud.google.com/pubsub/docs/replay-overview">Seek</a>
-          # operations, which allow
-          # you to manage message acknowledgments in bulk. That is, you can set the
-          # acknowledgment state of messages in an existing subscription to the state
-          # captured by a snapshot.
-          # <br><br>If the snapshot already exists, returns `ALREADY_EXISTS`.
-          # If the requested subscription doesn't exist, returns `NOT_FOUND`.
-          # If the backlog in the subscription is too old -- and the resulting snapshot
-          # would expire in less than 1 hour -- then `FAILED_PRECONDITION` is returned.
-          # See also the `Snapshot.expire_time` field. If the name is not provided in
-          # the request, the server will assign a random
-          # name for this snapshot on the same project as the subscription, conforming
-          # to the
-          # [resource name
-          # format](https://cloud.google.com/pubsub/docs/admin#resource_names). The
-          # generated name is populated in the returned Snapshot object. Note that for
-          # REST API requests, you must specify a name in the request.
-          #
-          # @param name [String]
-          #   Required. User-provided name for this snapshot. If the name is not provided
-          #   in the request, the server will assign a random name for this snapshot on
-          #   the same project as the subscription. Note that for REST API requests, you
-          #   must specify a name.  See the <a
-          #   href="https://cloud.google.com/pubsub/docs/admin#resource_names"> resource
-          #   name rules</a>. Format is `projects/{project}/snapshots/{snap}`.
-          # @param subscription [String]
-          #   Required. The subscription whose backlog the snapshot retains.
-          #   Specifically, the created snapshot is guaranteed to retain:
-          #    (a) The existing backlog on the subscription. More precisely, this is
-          #        defined as the messages in the subscription's backlog that are
-          #        unacknowledged upon the successful completion of the
-          #        `CreateSnapshot` request; as well as:
-          #    (b) Any messages published to the subscription's topic following the
-          #        successful completion of the CreateSnapshot request.
-          #   Format is `projects/{project}/subscriptions/{sub}`.
-          # @param labels [Hash{String => String}]
-          #   See <a href="https://cloud.google.com/pubsub/docs/labels"> Creating and
-          #   managing labels</a>.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result [Google::Cloud::PubSub::V1::Snapshot]
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @return [Google::Cloud::PubSub::V1::Snapshot]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   formatted_name = Google::Cloud::PubSub::V1::SubscriberClient.snapshot_path("[PROJECT]", "[SNAPSHOT]")
-          #   formatted_subscription = Google::Cloud::PubSub::V1::SubscriberClient.subscription_path("[PROJECT]", "[SUBSCRIPTION]")
-          #   response = subscriber_client.create_snapshot(formatted_name, formatted_subscription)
-
-          def create_snapshot \
-              name,
-              subscription,
-              labels: nil,
-              options: nil,
-              &block
-            req = {
-              name: name,
-              subscription: subscription,
-              labels: labels
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::CreateSnapshotRequest)
-            @create_snapshot.call(req, options, &block)
-          end
-
-          # Updates an existing snapshot. Snapshots are used in
-          # <a href="https://cloud.google.com/pubsub/docs/replay-overview">Seek</a>
-          # operations, which allow
-          # you to manage message acknowledgments in bulk. That is, you can set the
-          # acknowledgment state of messages in an existing subscription to the state
-          # captured by a snapshot.
-          #
-          # @param snapshot [Google::Cloud::PubSub::V1::Snapshot | Hash]
-          #   Required. The updated snapshot object.
-          #   A hash of the same form as `Google::Cloud::PubSub::V1::Snapshot`
-          #   can also be provided.
-          # @param update_mask [Google::Protobuf::FieldMask | Hash]
-          #   Required. Indicates which fields in the provided snapshot to update.
-          #   Must be specified and non-empty.
-          #   A hash of the same form as `Google::Protobuf::FieldMask`
-          #   can also be provided.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result [Google::Cloud::PubSub::V1::Snapshot]
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @return [Google::Cloud::PubSub::V1::Snapshot]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   seconds = 123456
-          #   expire_time = { seconds: seconds }
-          #   snapshot = { expire_time: expire_time }
-          #   paths_element = "expire_time"
-          #   paths = [paths_element]
-          #   update_mask = { paths: paths }
-          #   response = subscriber_client.update_snapshot(snapshot, update_mask)
-
-          def update_snapshot \
-              snapshot,
-              update_mask,
-              options: nil,
-              &block
-            req = {
-              snapshot: snapshot,
-              update_mask: update_mask
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::UpdateSnapshotRequest)
-            @update_snapshot.call(req, options, &block)
-          end
-
-          # Removes an existing snapshot. Snapshots are used in
-          # <a href="https://cloud.google.com/pubsub/docs/replay-overview">Seek</a>
-          # operations, which allow
-          # you to manage message acknowledgments in bulk. That is, you can set the
-          # acknowledgment state of messages in an existing subscription to the state
-          # captured by a snapshot.<br><br>
-          # When the snapshot is deleted, all messages retained in the snapshot
-          # are immediately dropped. After a snapshot is deleted, a new one may be
-          # created with the same name, but the new one has no association with the old
-          # snapshot or its subscription, unless the same subscription is specified.
-          #
-          # @param snapshot [String]
-          #   Required. The name of the snapshot to delete.
-          #   Format is `projects/{project}/snapshots/{snap}`.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result []
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   formatted_snapshot = Google::Cloud::PubSub::V1::SubscriberClient.snapshot_path("[PROJECT]", "[SNAPSHOT]")
-          #   subscriber_client.delete_snapshot(formatted_snapshot)
-
-          def delete_snapshot \
-              snapshot,
-              options: nil,
-              &block
-            req = {
-              snapshot: snapshot
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::DeleteSnapshotRequest)
-            @delete_snapshot.call(req, options, &block)
-            nil
-          end
-
-          # Seeks an existing subscription to a point in time or to a given snapshot,
-          # whichever is provided in the request. Snapshots are used in
-          # <a href="https://cloud.google.com/pubsub/docs/replay-overview">Seek</a>
-          # operations, which allow
-          # you to manage message acknowledgments in bulk. That is, you can set the
-          # acknowledgment state of messages in an existing subscription to the state
-          # captured by a snapshot. Note that both the subscription and the snapshot
-          # must be on the same topic.
-          #
-          # @param subscription [String]
-          #   Required. The subscription to affect.
-          # @param time [Google::Protobuf::Timestamp | Hash]
-          #   The time to seek to.
-          #   Messages retained in the subscription that were published before this
-          #   time are marked as acknowledged, and messages retained in the
-          #   subscription that were published after this time are marked as
-          #   unacknowledged. Note that this operation affects only those messages
-          #   retained in the subscription (configured by the combination of
-          #   `message_retention_duration` and `retain_acked_messages`). For example,
-          #   if `time` corresponds to a point before the message retention
-          #   window (or to a point before the system's notion of the subscription
-          #   creation time), only retained messages will be marked as unacknowledged,
-          #   and already-expunged messages will not be restored.
-          #   A hash of the same form as `Google::Protobuf::Timestamp`
-          #   can also be provided.
-          # @param snapshot [String]
-          #   The snapshot to seek to. The snapshot's topic must be the same as that of
-          #   the provided subscription.
-          #   Format is `projects/{project}/snapshots/{snap}`.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result [Google::Cloud::PubSub::V1::SeekResponse]
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @return [Google::Cloud::PubSub::V1::SeekResponse]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #   formatted_subscription = Google::Cloud::PubSub::V1::SubscriberClient.subscription_path("[PROJECT]", "[SUBSCRIPTION]")
-          #   response = subscriber_client.seek(formatted_subscription)
-
-          def seek \
-              subscription,
-              time: nil,
-              snapshot: nil,
-              options: nil,
-              &block
-            req = {
-              subscription: subscription,
-              time: time,
-              snapshot: snapshot
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Cloud::PubSub::V1::SeekRequest)
-            @seek.call(req, options, &block)
-          end
-
-          # Sets the access control policy on the specified resource. Replaces
-          # any existing policy.
-          #
-          # Can return `NOT_FOUND`, `INVALID_ARGUMENT`, and `PERMISSION_DENIED`
-          # errors.
-          #
-          # @param resource [String]
-          #   REQUIRED: The resource for which the policy is being specified.
-          #   See the operation documentation for the appropriate value for this field.
-          # @param policy [Google::Iam::V1::Policy | Hash]
-          #   REQUIRED: The complete policy to be applied to the `resource`. The size of
-          #   the policy is limited to a few 10s of KB. An empty policy is a
-          #   valid policy but certain Cloud Platform services (such as Projects)
-          #   might reject them.
-          #   A hash of the same form as `Google::Iam::V1::Policy`
-          #   can also be provided.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result [Google::Iam::V1::Policy]
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @return [Google::Iam::V1::Policy]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #
-          #   # TODO: Initialize `resource`:
-          #   resource = ''
-          #
-          #   # TODO: Initialize `policy`:
-          #   policy = {}
-          #   response = subscriber_client.set_iam_policy(resource, policy)
-
-          def set_iam_policy \
-              resource,
-              policy,
-              options: nil,
-              &block
-            req = {
-              resource: resource,
-              policy: policy
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Iam::V1::SetIamPolicyRequest)
-            @set_iam_policy.call(req, options, &block)
-          end
-
-          # Gets the access control policy for a resource. Returns an empty policy
-          # if the resource exists and does not have a policy set.
-          #
-          # @param resource [String]
-          #   REQUIRED: The resource for which the policy is being requested.
-          #   See the operation documentation for the appropriate value for this field.
-          # @param options_ [Google::Iam::V1::GetPolicyOptions | Hash]
-          #   OPTIONAL: A `GetPolicyOptions` object for specifying options to
-          #   `GetIamPolicy`. This field is only used by Cloud IAM.
-          #   A hash of the same form as `Google::Iam::V1::GetPolicyOptions`
-          #   can also be provided.
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result [Google::Iam::V1::Policy]
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @return [Google::Iam::V1::Policy]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #
-          #   # TODO: Initialize `resource`:
-          #   resource = ''
-          #   response = subscriber_client.get_iam_policy(resource)
-
-          def get_iam_policy \
-              resource,
-              options_: nil,
-              options: nil,
-              &block
-            req = {
-              resource: resource,
-              options: options_
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Iam::V1::GetIamPolicyRequest)
-            @get_iam_policy.call(req, options, &block)
-          end
-
-          # Returns permissions that a caller has on the specified resource. If the
-          # resource does not exist, this will return an empty set of
-          # permissions, not a `NOT_FOUND` error.
-          #
-          # Note: This operation is designed to be used for building
-          # permission-aware UIs and command-line tools, not for authorization
-          # checking. This operation may "fail open" without warning.
-          #
-          # @param resource [String]
-          #   REQUIRED: The resource for which the policy detail is being requested.
-          #   See the operation documentation for the appropriate value for this field.
-          # @param permissions [Array<String>]
-          #   The set of permissions to check for the `resource`. Permissions with
-          #   wildcards (such as '*' or 'storage.*') are not allowed. For more
-          #   information see
-          #   [IAM Overview](https://cloud.google.com/iam/docs/overview#permissions).
-          # @param options [Google::Gax::CallOptions]
-          #   Overrides the default settings for this call, e.g, timeout,
-          #   retries, etc.
-          # @yield [result, operation] Access the result along with the RPC operation
-          # @yieldparam result [Google::Iam::V1::TestIamPermissionsResponse]
-          # @yieldparam operation [GRPC::ActiveCall::Operation]
-          # @return [Google::Iam::V1::TestIamPermissionsResponse]
-          # @raise [Google::Gax::GaxError] if the RPC is aborted.
-          # @example
-          #   require "google/cloud/pubsub"
-          #
-          #   subscriber_client = Google::Cloud::PubSub::Subscriber.new(version: :v1)
-          #
-          #   # TODO: Initialize `resource`:
-          #   resource = ''
-          #
-          #   # TODO: Initialize `permissions`:
-          #   permissions = []
-          #   response = subscriber_client.test_iam_permissions(resource, permissions)
-
-          def test_iam_permissions \
-              resource,
-              permissions,
-              options: nil,
-              &block
-            req = {
-              resource: resource,
-              permissions: permissions
-            }.delete_if { |_, v| v.nil? }
-            req = Google::Gax::to_proto(req, Google::Iam::V1::TestIamPermissionsRequest)
-            @test_iam_permissions.call(req, options, &block)
-          end
-        end
-      end
-    end
-
-    Pubsub = PubSub unless const_defined? :Pubsub
-  end
-end