google-cloud-monitoring 0.38.0 → 1.2.0

data/lib/google/cloud/monitoring/v3/doc/google/monitoring/v3/alert_service.rb

@@ -1,138 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Monitoring
-    module V3
-      # The protocol for the `CreateAlertPolicy` request.
-      # @!attribute [rw] name
-      #   @return [String]
-      #     Required. The project in which to create the alerting policy. The format is:
-      #
-      #         projects/[PROJECT_ID_OR_NUMBER]
-      #
-      #     Note that this field names the parent container in which the alerting
-      #     policy will be written, not the name of the created policy. The alerting
-      #     policy that is returned will have a name that contains a normalized
-      #     representation of this name as a prefix but adds a suffix of the form
-      #     `/alertPolicies/[ALERT_POLICY_ID]`, identifying the policy in the
-      #     container.
-      # @!attribute [rw] alert_policy
-      #   @return [Google::Monitoring::V3::AlertPolicy]
-      #     Required. The requested alerting policy. You should omit the `name` field in this
-      #     policy. The name will be returned in the new policy, including
-      #     a new `[ALERT_POLICY_ID]` value.
-      class CreateAlertPolicyRequest; end
-
-      # The protocol for the `GetAlertPolicy` request.
-      # @!attribute [rw] name
-      #   @return [String]
-      #     Required. The alerting policy to retrieve. The format is:
-      #
-      #         projects/[PROJECT_ID_OR_NUMBER]/alertPolicies/[ALERT_POLICY_ID]
-      class GetAlertPolicyRequest; end
-
-      # The protocol for the `ListAlertPolicies` request.
-      # @!attribute [rw] name
-      #   @return [String]
-      #     Required. The project whose alert policies are to be listed. The format is:
-      #
-      #         projects/[PROJECT_ID_OR_NUMBER]
-      #
-      #     Note that this field names the parent container in which the alerting
-      #     policies to be listed are stored. To retrieve a single alerting policy
-      #     by name, use the
-      #     {Google::Monitoring::V3::AlertPolicyService::GetAlertPolicy GetAlertPolicy}
-      #     operation, instead.
-      # @!attribute [rw] filter
-      #   @return [String]
-      #     If provided, this field specifies the criteria that must be met by
-      #     alert policies to be included in the response.
-      #
-      #     For more details, see [sorting and
-      #     filtering](https://cloud.google.com/monitoring/api/v3/sorting-and-filtering).
-      # @!attribute [rw] order_by
-      #   @return [String]
-      #     A comma-separated list of fields by which to sort the result. Supports
-      #     the same set of field references as the `filter` field. Entries can be
-      #     prefixed with a minus sign to sort by the field in descending order.
-      #
-      #     For more details, see [sorting and
-      #     filtering](https://cloud.google.com/monitoring/api/v3/sorting-and-filtering).
-      # @!attribute [rw] page_size
-      #   @return [Integer]
-      #     The maximum number of results to return in a single response.
-      # @!attribute [rw] page_token
-      #   @return [String]
-      #     If this field is not empty then it must contain the `nextPageToken` value
-      #     returned by a previous call to this method.  Using this field causes the
-      #     method to return more results from the previous method call.
-      class ListAlertPoliciesRequest; end
-
-      # The protocol for the `ListAlertPolicies` response.
-      # @!attribute [rw] alert_policies
-      #   @return [Array<Google::Monitoring::V3::AlertPolicy>]
-      #     The returned alert policies.
-      # @!attribute [rw] next_page_token
-      #   @return [String]
-      #     If there might be more results than were returned, then this field is set
-      #     to a non-empty value. To see the additional results,
-      #     use that value as `page_token` in the next call to this method.
-      class ListAlertPoliciesResponse; end
-
-      # The protocol for the `UpdateAlertPolicy` request.
-      # @!attribute [rw] update_mask
-      #   @return [Google::Protobuf::FieldMask]
-      #     Optional. A list of alerting policy field names. If this field is not
-      #     empty, each listed field in the existing alerting policy is set to the
-      #     value of the corresponding field in the supplied policy (`alert_policy`),
-      #     or to the field's default value if the field is not in the supplied
-      #     alerting policy.  Fields not listed retain their previous value.
-      #
-      #     Examples of valid field masks include `display_name`, `documentation`,
-      #     `documentation.content`, `documentation.mime_type`, `user_labels`,
-      #     `user_label.nameofkey`, `enabled`, `conditions`, `combiner`, etc.
-      #
-      #     If this field is empty, then the supplied alerting policy replaces the
-      #     existing policy. It is the same as deleting the existing policy and
-      #     adding the supplied policy, except for the following:
-      #
-      #     * The new policy will have the same `[ALERT_POLICY_ID]` as the former
-      #       policy. This gives you continuity with the former policy in your
-      #       notifications and incidents.
-      #     * Conditions in the new policy will keep their former `[CONDITION_ID]` if
-      #       the supplied condition includes the `name` field with that
-      #       `[CONDITION_ID]`. If the supplied condition omits the `name` field,
-      #       then a new `[CONDITION_ID]` is created.
-      # @!attribute [rw] alert_policy
-      #   @return [Google::Monitoring::V3::AlertPolicy]
-      #     Required. The updated alerting policy or the updated values for the
-      #     fields listed in `update_mask`.
-      #     If `update_mask` is not empty, any fields in this policy that are
-      #     not in `update_mask` are ignored.
-      class UpdateAlertPolicyRequest; end
-
-      # The protocol for the `DeleteAlertPolicy` request.
-      # @!attribute [rw] name
-      #   @return [String]
-      #     Required. The alerting policy to delete. The format is:
-      #
-      #         projects/[PROJECT_ID_OR_NUMBER]/alertPolicies/[ALERT_POLICY_ID]
-      #
-      #     For more information, see {Google::Monitoring::V3::AlertPolicy AlertPolicy}.
-      class DeleteAlertPolicyRequest; end
-    end
-  end
-end

data/lib/google/cloud/monitoring/v3/doc/google/monitoring/v3/common.rb

@@ -1,449 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Monitoring
-    module V3
-      # A single strongly-typed value.
-      # @!attribute [rw] bool_value
-      #   @return [true, false]
-      #     A Boolean value: `true` or `false`.
-      # @!attribute [rw] int64_value
-      #   @return [Integer]
-      #     A 64-bit integer. Its range is approximately &plusmn;9.2x10<sup>18</sup>.
-      # @!attribute [rw] double_value
-      #   @return [Float]
-      #     A 64-bit double-precision floating-point number. Its magnitude
-      #     is approximately &plusmn;10<sup>&plusmn;300</sup> and it has 16
-      #     significant digits of precision.
-      # @!attribute [rw] string_value
-      #   @return [String]
-      #     A variable-length string value.
-      # @!attribute [rw] distribution_value
-      #   @return [Google::Api::Distribution]
-      #     A distribution value.
-      class TypedValue; end
-
-      # A closed time interval. It extends from the start time to the end time, and includes both: `[startTime, endTime]`. Valid time intervals depend on the [`MetricKind`](https://cloud.google.com/monitoring/api/ref_v3/rest/v3/projects.metricDescriptors#MetricKind) of the metric value. In no case can the end time be earlier than the start time.
-      #
-      # * For a `GAUGE` metric, the `startTime` value is technically optional; if
-      #   no value is specified, the start time defaults to the value of the
-      #   end time, and the interval represents a single point in time. If both
-      #   start and end times are specified, they must be identical. Such an
-      #   interval is valid only for `GAUGE` metrics, which are point-in-time
-      #   measurements.
-      #
-      # * For `DELTA` and `CUMULATIVE` metrics, the start time must be earlier
-      #   than the end time.
-      #
-      # * In all cases, the start time of the next interval must be
-      #   at least a millisecond after the end time of the previous interval.
-      #   Because the interval is closed, if the start time of a new interval
-      #   is the same as the end time of the previous interval, data written
-      #   at the new start time could overwrite data written at the previous
-      #   end time.
-      # @!attribute [rw] end_time
-      #   @return [Google::Protobuf::Timestamp]
-      #     Required. The end of the time interval.
-      # @!attribute [rw] start_time
-      #   @return [Google::Protobuf::Timestamp]
-      #     Optional. The beginning of the time interval.  The default value
-      #     for the start time is the end time. The start time must not be
-      #     later than the end time.
-      class TimeInterval; end
-
-      # Describes how to combine multiple time series to provide a different view of
-      # the data.  Aggregation of time series is done in two steps. First, each time
-      # series in the set is _aligned_ to the same time interval boundaries, then the
-      # set of time series is optionally _reduced_ in number.
-      #
-      # Alignment consists of applying the `per_series_aligner` operation
-      # to each time series after its data has been divided into regular
-      # `alignment_period` time intervals. This process takes _all_ of the data
-      # points in an alignment period, applies a mathematical transformation such as
-      # averaging, minimum, maximum, delta, etc., and converts them into a single
-      # data point per period.
-      #
-      # Reduction is when the aligned and transformed time series can optionally be
-      # combined, reducing the number of time series through similar mathematical
-      # transformations. Reduction involves applying a `cross_series_reducer` to
-      # all the time series, optionally sorting the time series into subsets with
-      # `group_by_fields`, and applying the reducer to each subset.
-      #
-      # The raw time series data can contain a huge amount of information from
-      # multiple sources. Alignment and reduction transforms this mass of data into
-      # a more manageable and representative collection of data, for example "the
-      # 95% latency across the average of all tasks in a cluster". This
-      # representative data can be more easily graphed and comprehended, and the
-      # individual time series data is still available for later drilldown. For more
-      # details, see [Filtering and
-      # aggregation](https://cloud.google.com/monitoring/api/v3/aggregation).
-      # @!attribute [rw] alignment_period
-      #   @return [Google::Protobuf::Duration]
-      #     The `alignment_period` specifies a time interval, in seconds, that is used
-      #     to divide the data in all the
-      #     {Google::Monitoring::V3::TimeSeries time series} into consistent blocks of
-      #     time. This will be done before the per-series aligner can be applied to
-      #     the data.
-      #
-      #     The value must be at least 60 seconds. If a per-series aligner other than
-      #     `ALIGN_NONE` is specified, this field is required or an error is returned.
-      #     If no per-series aligner is specified, or the aligner `ALIGN_NONE` is
-      #     specified, then this field is ignored.
-      # @!attribute [rw] per_series_aligner
-      #   @return [Google::Monitoring::V3::Aggregation::Aligner]
-      #     An `Aligner` describes how to bring the data points in a single
-      #     time series into temporal alignment. Except for `ALIGN_NONE`, all
-      #     alignments cause all the data points in an `alignment_period` to be
-      #     mathematically grouped together, resulting in a single data point for
-      #     each `alignment_period` with end timestamp at the end of the period.
-      #
-      #     Not all alignment operations may be applied to all time series. The valid
-      #     choices depend on the `metric_kind` and `value_type` of the original time
-      #     series. Alignment can change the `metric_kind` or the `value_type` of
-      #     the time series.
-      #
-      #     Time series data must be aligned in order to perform cross-time
-      #     series reduction. If `cross_series_reducer` is specified, then
-      #     `per_series_aligner` must be specified and not equal to `ALIGN_NONE`
-      #     and `alignment_period` must be specified; otherwise, an error is
-      #     returned.
-      # @!attribute [rw] cross_series_reducer
-      #   @return [Google::Monitoring::V3::Aggregation::Reducer]
-      #     The reduction operation to be used to combine time series into a single
-      #     time series, where the value of each data point in the resulting series is
-      #     a function of all the already aligned values in the input time series.
-      #
-      #     Not all reducer operations can be applied to all time series. The valid
-      #     choices depend on the `metric_kind` and the `value_type` of the original
-      #     time series. Reduction can yield a time series with a different
-      #     `metric_kind` or `value_type` than the input time series.
-      #
-      #     Time series data must first be aligned (see `per_series_aligner`) in order
-      #     to perform cross-time series reduction. If `cross_series_reducer` is
-      #     specified, then `per_series_aligner` must be specified, and must not be
-      #     `ALIGN_NONE`. An `alignment_period` must also be specified; otherwise, an
-      #     error is returned.
-      # @!attribute [rw] group_by_fields
-      #   @return [Array<String>]
-      #     The set of fields to preserve when `cross_series_reducer` is
-      #     specified. The `group_by_fields` determine how the time series are
-      #     partitioned into subsets prior to applying the aggregation
-      #     operation. Each subset contains time series that have the same
-      #     value for each of the grouping fields. Each individual time
-      #     series is a member of exactly one subset. The
-      #     `cross_series_reducer` is applied to each subset of time series.
-      #     It is not possible to reduce across different resource types, so
-      #     this field implicitly contains `resource.type`.  Fields not
-      #     specified in `group_by_fields` are aggregated away.  If
-      #     `group_by_fields` is not specified and all the time series have
-      #     the same resource type, then the time series are aggregated into
-      #     a single output time series. If `cross_series_reducer` is not
-      #     defined, this field is ignored.
-      class Aggregation
-        # The `Aligner` specifies the operation that will be applied to the data
-        # points in each alignment period in a time series. Except for
-        # `ALIGN_NONE`, which specifies that no operation be applied, each alignment
-        # operation replaces the set of data values in each alignment period with
-        # a single value: the result of applying the operation to the data values.
-        # An aligned time series has a single data value at the end of each
-        # `alignment_period`.
-        #
-        # An alignment operation can change the data type of the values, too. For
-        # example, if you apply a counting operation to boolean values, the data
-        # `value_type` in the original time series is `BOOLEAN`, but the `value_type`
-        # in the aligned result is `INT64`.
-        module Aligner
-          # No alignment. Raw data is returned. Not valid if cross-series reduction
-          # is requested. The `value_type` of the result is the same as the
-          # `value_type` of the input.
-          ALIGN_NONE = 0
-
-          # Align and convert to
-          # {Google::Api::MetricDescriptor::MetricKind::DELTA DELTA}.
-          # The output is `delta = y1 - y0`.
-          #
-          # This alignment is valid for
-          # {Google::Api::MetricDescriptor::MetricKind::CUMULATIVE CUMULATIVE} and
-          # `DELTA` metrics. If the selected alignment period results in periods
-          # with no data, then the aligned value for such a period is created by
-          # interpolation. The `value_type`  of the aligned result is the same as
-          # the `value_type` of the input.
-          ALIGN_DELTA = 1
-
-          # Align and convert to a rate. The result is computed as
-          # `rate = (y1 - y0)/(t1 - t0)`, or "delta over time".
-          # Think of this aligner as providing the slope of the line that passes
-          # through the value at the start and at the end of the `alignment_period`.
-          #
-          # This aligner is valid for `CUMULATIVE`
-          # and `DELTA` metrics with numeric values. If the selected alignment
-          # period results in periods with no data, then the aligned value for
-          # such a period is created by interpolation. The output is a `GAUGE`
-          # metric with `value_type` `DOUBLE`.
-          #
-          # If, by "rate", you mean "percentage change", see the
-          # `ALIGN_PERCENT_CHANGE` aligner instead.
-          ALIGN_RATE = 2
-
-          # Align by interpolating between adjacent points around the alignment
-          # period boundary. This aligner is valid for `GAUGE` metrics with
-          # numeric values. The `value_type` of the aligned result is the same as the
-          # `value_type` of the input.
-          ALIGN_INTERPOLATE = 3
-
-          # Align by moving the most recent data point before the end of the
-          # alignment period to the boundary at the end of the alignment
-          # period. This aligner is valid for `GAUGE` metrics. The `value_type` of
-          # the aligned result is the same as the `value_type` of the input.
-          ALIGN_NEXT_OLDER = 4
-
-          # Align the time series by returning the minimum value in each alignment
-          # period. This aligner is valid for `GAUGE` and `DELTA` metrics with
-          # numeric values. The `value_type` of the aligned result is the same as
-          # the `value_type` of the input.
-          ALIGN_MIN = 10
-
-          # Align the time series by returning the maximum value in each alignment
-          # period. This aligner is valid for `GAUGE` and `DELTA` metrics with
-          # numeric values. The `value_type` of the aligned result is the same as
-          # the `value_type` of the input.
-          ALIGN_MAX = 11
-
-          # Align the time series by returning the mean value in each alignment
-          # period. This aligner is valid for `GAUGE` and `DELTA` metrics with
-          # numeric values. The `value_type` of the aligned result is `DOUBLE`.
-          ALIGN_MEAN = 12
-
-          # Align the time series by returning the number of values in each alignment
-          # period. This aligner is valid for `GAUGE` and `DELTA` metrics with
-          # numeric or Boolean values. The `value_type` of the aligned result is
-          # `INT64`.
-          ALIGN_COUNT = 13
-
-          # Align the time series by returning the sum of the values in each
-          # alignment period. This aligner is valid for `GAUGE` and `DELTA`
-          # metrics with numeric and distribution values. The `value_type` of the
-          # aligned result is the same as the `value_type` of the input.
-          ALIGN_SUM = 14
-
-          # Align the time series by returning the standard deviation of the values
-          # in each alignment period. This aligner is valid for `GAUGE` and
-          # `DELTA` metrics with numeric values. The `value_type` of the output is
-          # `DOUBLE`.
-          ALIGN_STDDEV = 15
-
-          # Align the time series by returning the number of `True` values in
-          # each alignment period. This aligner is valid for `GAUGE` metrics with
-          # Boolean values. The `value_type` of the output is `INT64`.
-          ALIGN_COUNT_TRUE = 16
-
-          # Align the time series by returning the number of `False` values in
-          # each alignment period. This aligner is valid for `GAUGE` metrics with
-          # Boolean values. The `value_type` of the output is `INT64`.
-          ALIGN_COUNT_FALSE = 24
-
-          # Align the time series by returning the ratio of the number of `True`
-          # values to the total number of values in each alignment period. This
-          # aligner is valid for `GAUGE` metrics with Boolean values. The output
-          # value is in the range [0.0, 1.0] and has `value_type` `DOUBLE`.
-          ALIGN_FRACTION_TRUE = 17
-
-          # Align the time series by using [percentile
-          # aggregation](https://en.wikipedia.org/wiki/Percentile). The resulting
-          # data point in each alignment period is the 99th percentile of all data
-          # points in the period. This aligner is valid for `GAUGE` and `DELTA`
-          # metrics with distribution values. The output is a `GAUGE` metric with
-          # `value_type` `DOUBLE`.
-          ALIGN_PERCENTILE_99 = 18
-
-          # Align the time series by using [percentile
-          # aggregation](https://en.wikipedia.org/wiki/Percentile). The resulting
-          # data point in each alignment period is the 95th percentile of all data
-          # points in the period. This aligner is valid for `GAUGE` and `DELTA`
-          # metrics with distribution values. The output is a `GAUGE` metric with
-          # `value_type` `DOUBLE`.
-          ALIGN_PERCENTILE_95 = 19
-
-          # Align the time series by using [percentile
-          # aggregation](https://en.wikipedia.org/wiki/Percentile). The resulting
-          # data point in each alignment period is the 50th percentile of all data
-          # points in the period. This aligner is valid for `GAUGE` and `DELTA`
-          # metrics with distribution values. The output is a `GAUGE` metric with
-          # `value_type` `DOUBLE`.
-          ALIGN_PERCENTILE_50 = 20
-
-          # Align the time series by using [percentile
-          # aggregation](https://en.wikipedia.org/wiki/Percentile). The resulting
-          # data point in each alignment period is the 5th percentile of all data
-          # points in the period. This aligner is valid for `GAUGE` and `DELTA`
-          # metrics with distribution values. The output is a `GAUGE` metric with
-          # `value_type` `DOUBLE`.
-          ALIGN_PERCENTILE_05 = 21
-
-          # Align and convert to a percentage change. This aligner is valid for
-          # `GAUGE` and `DELTA` metrics with numeric values. This alignment returns
-          # `((current - previous)/previous) * 100`, where the value of `previous` is
-          # determined based on the `alignment_period`.
-          #
-          # If the values of `current` and `previous` are both 0, then the returned
-          # value is 0. If only `previous` is 0, the returned value is infinity.
-          #
-          # A 10-minute moving mean is computed at each point of the alignment period
-          # prior to the above calculation to smooth the metric and prevent false
-          # positives from very short-lived spikes. The moving mean is only
-          # applicable for data whose values are `>= 0`. Any values `< 0` are
-          # treated as a missing datapoint, and are ignored. While `DELTA`
-          # metrics are accepted by this alignment, special care should be taken that
-          # the values for the metric will always be positive. The output is a
-          # `GAUGE` metric with `value_type` `DOUBLE`.
-          ALIGN_PERCENT_CHANGE = 23
-        end
-
-        # A Reducer operation describes how to aggregate data points from multiple
-        # time series into a single time series, where the value of each data point
-        # in the resulting series is a function of all the already aligned values in
-        # the input time series.
-        module Reducer
-          # No cross-time series reduction. The output of the `Aligner` is
-          # returned.
-          REDUCE_NONE = 0
-
-          # Reduce by computing the mean value across time series for each
-          # alignment period. This reducer is valid for
-          # {Google::Api::MetricDescriptor::MetricKind::DELTA DELTA} and
-          # {Google::Api::MetricDescriptor::MetricKind::GAUGE GAUGE} metrics with
-          # numeric or distribution values. The `value_type` of the output is
-          # {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}.
-          REDUCE_MEAN = 1
-
-          # Reduce by computing the minimum value across time series for each
-          # alignment period. This reducer is valid for `DELTA` and `GAUGE` metrics
-          # with numeric values. The `value_type` of the output is the same as the
-          # `value_type` of the input.
-          REDUCE_MIN = 2
-
-          # Reduce by computing the maximum value across time series for each
-          # alignment period. This reducer is valid for `DELTA` and `GAUGE` metrics
-          # with numeric values. The `value_type` of the output is the same as the
-          # `value_type` of the input.
-          REDUCE_MAX = 3
-
-          # Reduce by computing the sum across time series for each
-          # alignment period. This reducer is valid for `DELTA` and `GAUGE` metrics
-          # with numeric and distribution values. The `value_type` of the output is
-          # the same as the `value_type` of the input.
-          REDUCE_SUM = 4
-
-          # Reduce by computing the standard deviation across time series
-          # for each alignment period. This reducer is valid for `DELTA` and
-          # `GAUGE` metrics with numeric or distribution values. The `value_type`
-          # of the output is `DOUBLE`.
-          REDUCE_STDDEV = 5
-
-          # Reduce by computing the number of data points across time series
-          # for each alignment period. This reducer is valid for `DELTA` and
-          # `GAUGE` metrics of numeric, Boolean, distribution, and string
-          # `value_type`. The `value_type` of the output is `INT64`.
-          REDUCE_COUNT = 6
-
-          # Reduce by computing the number of `True`-valued data points across time
-          # series for each alignment period. This reducer is valid for `DELTA` and
-          # `GAUGE` metrics of Boolean `value_type`. The `value_type` of the output
-          # is `INT64`.
-          REDUCE_COUNT_TRUE = 7
-
-          # Reduce by computing the number of `False`-valued data points across time
-          # series for each alignment period. This reducer is valid for `DELTA` and
-          # `GAUGE` metrics of Boolean `value_type`. The `value_type` of the output
-          # is `INT64`.
-          REDUCE_COUNT_FALSE = 15
-
-          # Reduce by computing the ratio of the number of `True`-valued data points
-          # to the total number of data points for each alignment period. This
-          # reducer is valid for `DELTA` and `GAUGE` metrics of Boolean `value_type`.
-          # The output value is in the range [0.0, 1.0] and has `value_type`
-          # `DOUBLE`.
-          REDUCE_FRACTION_TRUE = 8
-
-          # Reduce by computing the [99th
-          # percentile](https://en.wikipedia.org/wiki/Percentile) of data points
-          # across time series for each alignment period. This reducer is valid for
-          # `GAUGE` and `DELTA` metrics of numeric and distribution type. The value
-          # of the output is `DOUBLE`.
-          REDUCE_PERCENTILE_99 = 9
-
-          # Reduce by computing the [95th
-          # percentile](https://en.wikipedia.org/wiki/Percentile) of data points
-          # across time series for each alignment period. This reducer is valid for
-          # `GAUGE` and `DELTA` metrics of numeric and distribution type. The value
-          # of the output is `DOUBLE`.
-          REDUCE_PERCENTILE_95 = 10
-
-          # Reduce by computing the [50th
-          # percentile](https://en.wikipedia.org/wiki/Percentile) of data points
-          # across time series for each alignment period. This reducer is valid for
-          # `GAUGE` and `DELTA` metrics of numeric and distribution type. The value
-          # of the output is `DOUBLE`.
-          REDUCE_PERCENTILE_50 = 11
-
-          # Reduce by computing the [5th
-          # percentile](https://en.wikipedia.org/wiki/Percentile) of data points
-          # across time series for each alignment period. This reducer is valid for
-          # `GAUGE` and `DELTA` metrics of numeric and distribution type. The value
-          # of the output is `DOUBLE`.
-          REDUCE_PERCENTILE_05 = 12
-        end
-      end
-
-      # Specifies an ordering relationship on two arguments, called `left` and
-      # `right`.
-      module ComparisonType
-        # No ordering relationship is specified.
-        COMPARISON_UNSPECIFIED = 0
-
-        # True if the left argument is greater than the right argument.
-        COMPARISON_GT = 1
-
-        # True if the left argument is greater than or equal to the right argument.
-        COMPARISON_GE = 2
-
-        # True if the left argument is less than the right argument.
-        COMPARISON_LT = 3
-
-        # True if the left argument is less than or equal to the right argument.
-        COMPARISON_LE = 4
-
-        # True if the left argument is equal to the right argument.
-        COMPARISON_EQ = 5
-
-        # True if the left argument is not equal to the right argument.
-        COMPARISON_NE = 6
-      end
-
-      # Obsolete.
-      module ServiceTier
-        # Obsolete.
-        SERVICE_TIER_UNSPECIFIED = 0
-
-        # Obsolete.
-        SERVICE_TIER_BASIC = 1
-
-        # Obsolete.
-        SERVICE_TIER_PREMIUM = 2
-      end
-    end
-  end
-end