google-cloud-monitoring 0.38.0 → 1.0.0

data/lib/google/cloud/monitoring/dashboard/v1/dashboards_service_client_config.json

@@ -1,51 +0,0 @@
-{
-  "interfaces": {
-    "google.monitoring.dashboard.v1.DashboardsService": {
-      "retry_codes": {
-        "idempotent": [
-          "DEADLINE_EXCEEDED",
-          "UNAVAILABLE"
-        ],
-        "non_idempotent": []
-      },
-      "retry_params": {
-        "default": {
-          "initial_retry_delay_millis": 100,
-          "retry_delay_multiplier": 1.3,
-          "max_retry_delay_millis": 60000,
-          "initial_rpc_timeout_millis": 20000,
-          "rpc_timeout_multiplier": 1.0,
-          "max_rpc_timeout_millis": 20000,
-          "total_timeout_millis": 600000
-        }
-      },
-      "methods": {
-        "CreateDashboard": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "ListDashboards": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "GetDashboard": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "DeleteDashboard": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "UpdateDashboard": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        }
-      }
-    }
-  }
-}

data/lib/google/cloud/monitoring/dashboard/v1/doc/google/monitoring/dashboard/v1/common.rb

@@ -1,394 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Monitoring
-    module Dashboard
-      module V1
-        # Describes how to combine multiple time series to provide different views of
-        # the data.  Aggregation consists of an alignment step on individual time
-        # series (`alignment_period` and `per_series_aligner`) followed by an optional
-        # reduction step of the data across the aligned time series
-        # (`cross_series_reducer` and `group_by_fields`).  For more details, see
-        # [Aggregation](https://cloud.google.com/monitoring/api/learn_more#aggregation).
-        # @!attribute [rw] alignment_period
-        #   @return [Google::Protobuf::Duration]
-        #     The alignment period for per-{TimeSeries time series}
-        #     alignment. If present, `alignmentPeriod` must be at least 60
-        #     seconds.  After per-time series alignment, each time series will
-        #     contain data points only on the period boundaries. If
-        #     `perSeriesAligner` is not specified or equals `ALIGN_NONE`, then
-        #     this field is ignored. If `perSeriesAligner` is specified and
-        #     does not equal `ALIGN_NONE`, then this field must be defined;
-        #     otherwise an error is returned.
-        # @!attribute [rw] per_series_aligner
-        #   @return [Google::Monitoring::Dashboard::V1::Aggregation::Aligner]
-        #     The approach to be used to align individual time series. Not all
-        #     alignment functions may be applied to all time series, depending
-        #     on the metric type and value type of the original time
-        #     series. Alignment may change the metric type or the value type of
-        #     the time series.
-        #
-        #     Time series data must be aligned in order to perform cross-time
-        #     series reduction. If `crossSeriesReducer` is specified, then
-        #     `perSeriesAligner` must be specified and not equal `ALIGN_NONE`
-        #     and `alignmentPeriod` must be specified; otherwise, an error is
-        #     returned.
-        # @!attribute [rw] cross_series_reducer
-        #   @return [Google::Monitoring::Dashboard::V1::Aggregation::Reducer]
-        #     The approach to be used to combine time series. Not all reducer
-        #     functions may be applied to all time series, depending on the
-        #     metric type and the value type of the original time
-        #     series. Reduction may change the metric type of value type of the
-        #     time series.
-        #
-        #     Time series data must be aligned in order to perform cross-time
-        #     series reduction. If `crossSeriesReducer` is specified, then
-        #     `perSeriesAligner` must be specified and not equal `ALIGN_NONE`
-        #     and `alignmentPeriod` must be specified; otherwise, an error is
-        #     returned.
-        # @!attribute [rw] group_by_fields
-        #   @return [Array<String>]
-        #     The set of fields to preserve when `crossSeriesReducer` is
-        #     specified. The `groupByFields` determine how the time series are
-        #     partitioned into subsets prior to applying the aggregation
-        #     function. Each subset contains time series that have the same
-        #     value for each of the grouping fields. Each individual time
-        #     series is a member of exactly one subset. The
-        #     `crossSeriesReducer` is applied to each subset of time series.
-        #     It is not possible to reduce across different resource types, so
-        #     this field implicitly contains `resource.type`.  Fields not
-        #     specified in `groupByFields` are aggregated away.  If
-        #     `groupByFields` is not specified and all the time series have
-        #     the same resource type, then the time series are aggregated into
-        #     a single output time series. If `crossSeriesReducer` is not
-        #     defined, this field is ignored.
-        class Aggregation
-          # The Aligner describes how to bring the data points in a single
-          # time series into temporal alignment.
-          module Aligner
-            # No alignment. Raw data is returned. Not valid if cross-time
-            # series reduction is requested. The value type of the result is
-            # the same as the value type of the input.
-            ALIGN_NONE = 0
-
-            # Align and convert to delta metric type. This alignment is valid
-            # for cumulative metrics and delta metrics. Aligning an existing
-            # delta metric to a delta metric requires that the alignment
-            # period be increased. The value type of the result is the same
-            # as the value type of the input.
-            #
-            # One can think of this aligner as a rate but without time units; that
-            # is, the output is conceptually (second_point - first_point).
-            ALIGN_DELTA = 1
-
-            # Align and convert to a rate. This alignment is valid for
-            # cumulative metrics and delta metrics with numeric values. The output is a
-            # gauge metric with value type
-            # {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}.
-            #
-            # One can think of this aligner as conceptually providing the slope of
-            # the line that passes through the value at the start and end of the
-            # window. In other words, this is conceptually ((y1 - y0)/(t1 - t0)),
-            # and the output unit is one that has a "/time" dimension.
-            #
-            # If, by rate, you are looking for percentage change, see the
-            # `ALIGN_PERCENT_CHANGE` aligner option.
-            ALIGN_RATE = 2
-
-            # Align by interpolating between adjacent points around the
-            # period boundary. This alignment is valid for gauge
-            # metrics with numeric values. The value type of the result is the same
-            # as the value type of the input.
-            ALIGN_INTERPOLATE = 3
-
-            # Align by shifting the oldest data point before the period
-            # boundary to the boundary. This alignment is valid for gauge
-            # metrics. The value type of the result is the same as the
-            # value type of the input.
-            ALIGN_NEXT_OLDER = 4
-
-            # Align time series via aggregation. The resulting data point in
-            # the alignment period is the minimum of all data points in the
-            # period. This alignment is valid for gauge and delta metrics with numeric
-            # values. The value type of the result is the same as the value
-            # type of the input.
-            ALIGN_MIN = 10
-
-            # Align time series via aggregation. The resulting data point in
-            # the alignment period is the maximum of all data points in the
-            # period. This alignment is valid for gauge and delta metrics with numeric
-            # values. The value type of the result is the same as the value
-            # type of the input.
-            ALIGN_MAX = 11
-
-            # Align time series via aggregation. The resulting data point in
-            # the alignment period is the average or arithmetic mean of all
-            # data points in the period. This alignment is valid for gauge and delta
-            # metrics with numeric values. The value type of the output is
-            # {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}.
-            ALIGN_MEAN = 12
-
-            # Align time series via aggregation. The resulting data point in
-            # the alignment period is the count of all data points in the
-            # period. This alignment is valid for gauge and delta metrics with numeric
-            # or Boolean values. The value type of the output is
-            # {Google::Api::MetricDescriptor::ValueType::INT64 INT64}.
-            ALIGN_COUNT = 13
-
-            # Align time series via aggregation. The resulting data point in
-            # the alignment period is the sum of all data points in the
-            # period. This alignment is valid for gauge and delta metrics with numeric
-            # and distribution values. The value type of the output is the
-            # same as the value type of the input.
-            ALIGN_SUM = 14
-
-            # Align time series via aggregation. The resulting data point in
-            # the alignment period is the standard deviation of all data
-            # points in the period. This alignment is valid for gauge and delta metrics
-            # with numeric values. The value type of the output is
-            # {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}.
-            ALIGN_STDDEV = 15
-
-            # Align time series via aggregation. The resulting data point in
-            # the alignment period is the count of True-valued data points in the
-            # period. This alignment is valid for gauge metrics with
-            # Boolean values. The value type of the output is
-            # {Google::Api::MetricDescriptor::ValueType::INT64 INT64}.
-            ALIGN_COUNT_TRUE = 16
-
-            # Align time series via aggregation. The resulting data point in
-            # the alignment period is the count of False-valued data points in the
-            # period. This alignment is valid for gauge metrics with
-            # Boolean values. The value type of the output is
-            # {Google::Api::MetricDescriptor::ValueType::INT64 INT64}.
-            ALIGN_COUNT_FALSE = 24
-
-            # Align time series via aggregation. The resulting data point in
-            # the alignment period is the fraction of True-valued data points in the
-            # period. This alignment is valid for gauge metrics with Boolean values.
-            # The output value is in the range [0, 1] and has value type
-            # {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}.
-            ALIGN_FRACTION_TRUE = 17
-
-            # Align time series via aggregation. The resulting data point in
-            # the alignment period is the 99th percentile of all data
-            # points in the period. This alignment is valid for gauge and delta metrics
-            # with distribution values. The output is a gauge metric with value type
-            # {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}.
-            ALIGN_PERCENTILE_99 = 18
-
-            # Align time series via aggregation. The resulting data point in
-            # the alignment period is the 95th percentile of all data
-            # points in the period. This alignment is valid for gauge and delta metrics
-            # with distribution values. The output is a gauge metric with value type
-            # {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}.
-            ALIGN_PERCENTILE_95 = 19
-
-            # Align time series via aggregation. The resulting data point in
-            # the alignment period is the 50th percentile of all data
-            # points in the period. This alignment is valid for gauge and delta metrics
-            # with distribution values. The output is a gauge metric with value type
-            # {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}.
-            ALIGN_PERCENTILE_50 = 20
-
-            # Align time series via aggregation. The resulting data point in
-            # the alignment period is the 5th percentile of all data
-            # points in the period. This alignment is valid for gauge and delta metrics
-            # with distribution values. The output is a gauge metric with value type
-            # {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}.
-            ALIGN_PERCENTILE_05 = 21
-
-            # Align and convert to a percentage change. This alignment is valid for
-            # gauge and delta metrics with numeric values. This alignment conceptually
-            # computes the equivalent of "((current - previous)/previous)*100"
-            # where previous value is determined based on the alignmentPeriod.
-            # In the event that previous is 0 the calculated value is infinity with the
-            # exception that if both (current - previous) and previous are 0 the
-            # calculated value is 0.
-            # A 10 minute moving mean is computed at each point of the time window
-            # prior to the above calculation to smooth the metric and prevent false
-            # positives from very short lived spikes.
-            # Only applicable for data that is >= 0. Any values < 0 are treated as
-            # no data. While delta metrics are accepted by this alignment special care
-            # should be taken that the values for the metric will always be positive.
-            # The output is a gauge metric with value type
-            # {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}.
-            ALIGN_PERCENT_CHANGE = 23
-          end
-
-          # A Reducer describes how to aggregate data points from multiple
-          # time series into a single time series.
-          module Reducer
-            # No cross-time series reduction. The output of the aligner is
-            # returned.
-            REDUCE_NONE = 0
-
-            # Reduce by computing the mean across time series for each
-            # alignment period. This reducer is valid for delta and
-            # gauge metrics with numeric or distribution values. The value type of the
-            # output is {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}.
-            REDUCE_MEAN = 1
-
-            # Reduce by computing the minimum across time series for each
-            # alignment period. This reducer is valid for delta and
-            # gauge metrics with numeric values. The value type of the output
-            # is the same as the value type of the input.
-            REDUCE_MIN = 2
-
-            # Reduce by computing the maximum across time series for each
-            # alignment period. This reducer is valid for delta and
-            # gauge metrics with numeric values. The value type of the output
-            # is the same as the value type of the input.
-            REDUCE_MAX = 3
-
-            # Reduce by computing the sum across time series for each
-            # alignment period. This reducer is valid for delta and
-            # gauge metrics with numeric and distribution values. The value type of
-            # the output is the same as the value type of the input.
-            REDUCE_SUM = 4
-
-            # Reduce by computing the standard deviation across time series
-            # for each alignment period. This reducer is valid for delta
-            # and gauge metrics with numeric or distribution values. The value type of
-            # the output is {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}.
-            REDUCE_STDDEV = 5
-
-            # Reduce by computing the count of data points across time series
-            # for each alignment period. This reducer is valid for delta
-            # and gauge metrics of numeric, Boolean, distribution, and string value
-            # type. The value type of the output is
-            # {Google::Api::MetricDescriptor::ValueType::INT64 INT64}.
-            REDUCE_COUNT = 6
-
-            # Reduce by computing the count of True-valued data points across time
-            # series for each alignment period. This reducer is valid for delta
-            # and gauge metrics of Boolean value type. The value type of
-            # the output is {Google::Api::MetricDescriptor::ValueType::INT64 INT64}.
-            REDUCE_COUNT_TRUE = 7
-
-            # Reduce by computing the count of False-valued data points across time
-            # series for each alignment period. This reducer is valid for delta
-            # and gauge metrics of Boolean value type. The value type of
-            # the output is {Google::Api::MetricDescriptor::ValueType::INT64 INT64}.
-            REDUCE_COUNT_FALSE = 15
-
-            # Reduce by computing the fraction of True-valued data points across time
-            # series for each alignment period. This reducer is valid for delta
-            # and gauge metrics of Boolean value type. The output value is in the
-            # range [0, 1] and has value type
-            # {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}.
-            REDUCE_FRACTION_TRUE = 8
-
-            # Reduce by computing 99th percentile of data points across time series
-            # for each alignment period. This reducer is valid for gauge and delta
-            # metrics of numeric and distribution type. The value of the output is
-            # {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}
-            REDUCE_PERCENTILE_99 = 9
-
-            # Reduce by computing 95th percentile of data points across time series
-            # for each alignment period. This reducer is valid for gauge and delta
-            # metrics of numeric and distribution type. The value of the output is
-            # {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}
-            REDUCE_PERCENTILE_95 = 10
-
-            # Reduce by computing 50th percentile of data points across time series
-            # for each alignment period. This reducer is valid for gauge and delta
-            # metrics of numeric and distribution type. The value of the output is
-            # {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}
-            REDUCE_PERCENTILE_50 = 11
-
-            # Reduce by computing 5th percentile of data points across time series
-            # for each alignment period. This reducer is valid for gauge and delta
-            # metrics of numeric and distribution type. The value of the output is
-            # {Google::Api::MetricDescriptor::ValueType::DOUBLE DOUBLE}
-            REDUCE_PERCENTILE_05 = 12
-          end
-        end
-
-        # Describes a ranking-based time series filter. Each input time series is
-        # ranked with an aligner. The filter lets through up to `num_time_series` time
-        # series, selecting them based on the relative ranking.
-        # @!attribute [rw] ranking_method
-        #   @return [Google::Monitoring::Dashboard::V1::PickTimeSeriesFilter::Method]
-        #     `rankingMethod` is applied to each time series independently to produce the
-        #     value which will be used to compare the time series to other time series.
-        # @!attribute [rw] num_time_series
-        #   @return [Integer]
-        #     How many time series to return.
-        # @!attribute [rw] direction
-        #   @return [Google::Monitoring::Dashboard::V1::PickTimeSeriesFilter::Direction]
-        #     How to use the ranking to select time series that pass through the filter.
-        class PickTimeSeriesFilter
-          # Describes the ranking directions.
-          module Direction
-            # Not allowed in well-formed requests.
-            DIRECTION_UNSPECIFIED = 0
-
-            # Pass the highest ranking inputs.
-            TOP = 1
-
-            # Pass the lowest ranking inputs.
-            BOTTOM = 2
-          end
-
-          # The value reducers that can be applied to a PickTimeSeriesFilter.
-          module Method
-            # Not allowed in well-formed requests.
-            METHOD_UNSPECIFIED = 0
-
-            # Select the mean of all values.
-            METHOD_MEAN = 1
-
-            # Select the maximum value.
-            METHOD_MAX = 2
-
-            # Select the minimum value.
-            METHOD_MIN = 3
-
-            # Compute the sum of all values.
-            METHOD_SUM = 4
-
-            # Select the most recent value.
-            METHOD_LATEST = 5
-          end
-        end
-
-        # A filter that ranks streams based on their statistical relation to other
-        # streams in a request.
-        # @!attribute [rw] ranking_method
-        #   @return [Google::Monitoring::Dashboard::V1::StatisticalTimeSeriesFilter::Method]
-        #     `rankingMethod` is applied to a set of time series, and then the produced
-        #     value for each individual time series is used to compare a given time
-        #     series to others.
-        #     These are methods that cannot be applied stream-by-stream, but rather
-        #     require the full context of a request to evaluate time series.
-        # @!attribute [rw] num_time_series
-        #   @return [Integer]
-        #     How many time series to output.
-        class StatisticalTimeSeriesFilter
-          # The filter methods that can be applied to a stream.
-          module Method
-            # Not allowed in well-formed requests.
-            METHOD_UNSPECIFIED = 0
-
-            # Compute the outlier score of each stream.
-            METHOD_CLUSTER_OUTLIER = 1
-          end
-        end
-      end
-    end
-  end
-end

data/lib/google/cloud/monitoring/dashboard/v1/doc/google/monitoring/dashboard/v1/dashboard.rb

@@ -1,53 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Monitoring
-    module Dashboard
-      module V1
-        # A Google Stackdriver dashboard. Dashboards define the content and layout
-        # of pages in the Stackdriver web application.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     The resource name of the dashboard.
-        # @!attribute [rw] display_name
-        #   @return [String]
-        #     The mutable, human-readable name.
-        # @!attribute [rw] etag
-        #   @return [String]
-        #     `etag` is used for optimistic concurrency control as a way to help
-        #     prevent simultaneous updates of a policy from overwriting each other.
-        #     An `etag` is returned in the response to `GetDashboard`, and
-        #     users are expected to put that etag in the request to `UpdateDashboard` to
-        #     ensure that their change will be applied to the same version of the
-        #     Dashboard configuration. The field should not be passed during
-        #     dashboard creation.
-        # @!attribute [rw] grid_layout
-        #   @return [Google::Monitoring::Dashboard::V1::GridLayout]
-        #     Content is arranged with a basic layout that re-flows a simple list of
-        #     informational elements like widgets or tiles.
-        # @!attribute [rw] row_layout
-        #   @return [Google::Monitoring::Dashboard::V1::RowLayout]
-        #     The content is divided into equally spaced rows and the widgets are
-        #     arranged horizontally.
-        # @!attribute [rw] column_layout
-        #   @return [Google::Monitoring::Dashboard::V1::ColumnLayout]
-        #     The content is divided into equally spaced columns and the widgets are
-        #     arranged vertically.
-        class Dashboard; end
-      end
-    end
-  end
-end