google-cloud-monitoring 0.37.1 → 1.0.2

data/lib/google/cloud/monitoring/v3/doc/google/monitoring/v3/uptime_service.rb

@@ -1,136 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Monitoring
-    module V3
-      # The protocol for the `ListUptimeCheckConfigs` request.
-      # @!attribute [rw] parent
-      #   @return [String]
-      #     Required. The project whose Uptime check configurations are listed. The format is:
-      #
-      #         projects/[PROJECT_ID_OR_NUMBER]
-      # @!attribute [rw] page_size
-      #   @return [Integer]
-      #     The maximum number of results to return in a single response. The server
-      #     may further constrain the maximum number of results returned in a single
-      #     page. If the page_size is <=0, the server will decide the number of results
-      #     to be returned.
-      # @!attribute [rw] page_token
-      #   @return [String]
-      #     If this field is not empty then it must contain the `nextPageToken` value
-      #     returned by a previous call to this method.  Using this field causes the
-      #     method to return more results from the previous method call.
-      class ListUptimeCheckConfigsRequest; end
-
-      # The protocol for the `ListUptimeCheckConfigs` response.
-      # @!attribute [rw] uptime_check_configs
-      #   @return [Array<Google::Monitoring::V3::UptimeCheckConfig>]
-      #     The returned Uptime check configurations.
-      # @!attribute [rw] next_page_token
-      #   @return [String]
-      #     This field represents the pagination token to retrieve the next page of
-      #     results. If the value is empty, it means no further results for the
-      #     request. To retrieve the next page of results, the value of the
-      #     next_page_token is passed to the subsequent List method call (in the
-      #     request message's page_token field).
-      # @!attribute [rw] total_size
-      #   @return [Integer]
-      #     The total number of Uptime check configurations for the project,
-      #     irrespective of any pagination.
-      class ListUptimeCheckConfigsResponse; end
-
-      # The protocol for the `GetUptimeCheckConfig` request.
-      # @!attribute [rw] name
-      #   @return [String]
-      #     Required. The Uptime check configuration to retrieve. The format is:
-      #
-      #         projects/[PROJECT_ID_OR_NUMBER]/uptimeCheckConfigs/[UPTIME_CHECK_ID]
-      class GetUptimeCheckConfigRequest; end
-
-      # The protocol for the `CreateUptimeCheckConfig` request.
-      # @!attribute [rw] parent
-      #   @return [String]
-      #     Required. The project in which to create the Uptime check. The format is:
-      #
-      #         projects/[PROJECT_ID_OR_NUMBER]
-      # @!attribute [rw] uptime_check_config
-      #   @return [Google::Monitoring::V3::UptimeCheckConfig]
-      #     Required. The new Uptime check configuration.
-      class CreateUptimeCheckConfigRequest; end
-
-      # The protocol for the `UpdateUptimeCheckConfig` request.
-      # @!attribute [rw] update_mask
-      #   @return [Google::Protobuf::FieldMask]
-      #     Optional. If present, only the listed fields in the current Uptime check
-      #     configuration are updated with values from the new configuration. If this
-      #     field is empty, then the current configuration is completely replaced with
-      #     the new configuration.
-      # @!attribute [rw] uptime_check_config
-      #   @return [Google::Monitoring::V3::UptimeCheckConfig]
-      #     Required. If an `updateMask` has been specified, this field gives
-      #     the values for the set of fields mentioned in the `updateMask`. If an
-      #     `updateMask` has not been given, this Uptime check configuration replaces
-      #     the current configuration. If a field is mentioned in `updateMask` but
-      #     the corresonding field is omitted in this partial Uptime check
-      #     configuration, it has the effect of deleting/clearing the field from the
-      #     configuration on the server.
-      #
-      #     The following fields can be updated: `display_name`,
-      #     `http_check`, `tcp_check`, `timeout`, `content_matchers`, and
-      #     `selected_regions`.
-      class UpdateUptimeCheckConfigRequest; end
-
-      # The protocol for the `DeleteUptimeCheckConfig` request.
-      # @!attribute [rw] name
-      #   @return [String]
-      #     Required. The Uptime check configuration to delete. The format is:
-      #
-      #         projects/[PROJECT_ID_OR_NUMBER]/uptimeCheckConfigs/[UPTIME_CHECK_ID]
-      class DeleteUptimeCheckConfigRequest; end
-
-      # The protocol for the `ListUptimeCheckIps` request.
-      # @!attribute [rw] page_size
-      #   @return [Integer]
-      #     The maximum number of results to return in a single response. The server
-      #     may further constrain the maximum number of results returned in a single
-      #     page. If the page_size is <=0, the server will decide the number of results
-      #     to be returned.
-      #     NOTE: this field is not yet implemented
-      # @!attribute [rw] page_token
-      #   @return [String]
-      #     If this field is not empty then it must contain the `nextPageToken` value
-      #     returned by a previous call to this method.  Using this field causes the
-      #     method to return more results from the previous method call.
-      #     NOTE: this field is not yet implemented
-      class ListUptimeCheckIpsRequest; end
-
-      # The protocol for the `ListUptimeCheckIps` response.
-      # @!attribute [rw] uptime_check_ips
-      #   @return [Array<Google::Monitoring::V3::UptimeCheckIp>]
-      #     The returned list of IP addresses (including region and location) that the
-      #     checkers run from.
-      # @!attribute [rw] next_page_token
-      #   @return [String]
-      #     This field represents the pagination token to retrieve the next page of
-      #     results. If the value is empty, it means no further results for the
-      #     request. To retrieve the next page of results, the value of the
-      #     next_page_token is passed to the subsequent List method call (in the
-      #     request message's page_token field).
-      #     NOTE: this field is not yet implemented
-      class ListUptimeCheckIpsResponse; end
-    end
-  end
-end

data/lib/google/cloud/monitoring/v3/doc/google/protobuf/any.rb

@@ -1,131 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Protobuf
-    # `Any` contains an arbitrary serialized protocol buffer message along with a
-    # URL that describes the type of the serialized message.
-    #
-    # Protobuf library provides support to pack/unpack Any values in the form
-    # of utility functions or additional generated methods of the Any type.
-    #
-    # Example 1: Pack and unpack a message in C++.
-    #
-    #     Foo foo = ...;
-    #     Any any;
-    #     any.PackFrom(foo);
-    #     ...
-    #     if (any.UnpackTo(&foo)) {
-    #       ...
-    #     }
-    #
-    # Example 2: Pack and unpack a message in Java.
-    #
-    #     Foo foo = ...;
-    #     Any any = Any.pack(foo);
-    #     ...
-    #     if (any.is(Foo.class)) {
-    #       foo = any.unpack(Foo.class);
-    #     }
-    #
-    #  Example 3: Pack and unpack a message in Python.
-    #
-    #     foo = Foo(...)
-    #     any = Any()
-    #     any.Pack(foo)
-    #     ...
-    #     if any.Is(Foo.DESCRIPTOR):
-    #       any.Unpack(foo)
-    #       ...
-    #
-    #  Example 4: Pack and unpack a message in Go
-    #
-    #      foo := &pb.Foo{...}
-    #      any, err := ptypes.MarshalAny(foo)
-    #      ...
-    #      foo := &pb.Foo{}
-    #      if err := ptypes.UnmarshalAny(any, foo); err != nil {
-    #        ...
-    #      }
-    #
-    # The pack methods provided by protobuf library will by default use
-    # 'type.googleapis.com/full.type.name' as the type URL and the unpack
-    # methods only use the fully qualified type name after the last '/'
-    # in the type URL, for example "foo.bar.com/x/y.z" will yield type
-    # name "y.z".
-    #
-    #
-    # = JSON
-    #
-    # The JSON representation of an `Any` value uses the regular
-    # representation of the deserialized, embedded message, with an
-    # additional field `@type` which contains the type URL. Example:
-    #
-    #     package google.profile;
-    #     message Person {
-    #       string first_name = 1;
-    #       string last_name = 2;
-    #     }
-    #
-    #     {
-    #       "@type": "type.googleapis.com/google.profile.Person",
-    #       "firstName": <string>,
-    #       "lastName": <string>
-    #     }
-    #
-    # If the embedded message type is well-known and has a custom JSON
-    # representation, that representation will be embedded adding a field
-    # `value` which holds the custom JSON in addition to the `@type`
-    # field. Example (for message {Google::Protobuf::Duration}):
-    #
-    #     {
-    #       "@type": "type.googleapis.com/google.protobuf.Duration",
-    #       "value": "1.212s"
-    #     }
-    # @!attribute [rw] type_url
-    #   @return [String]
-    #     A URL/resource name that uniquely identifies the type of the serialized
-    #     protocol buffer message. This string must contain at least
-    #     one "/" character. The last segment of the URL's path must represent
-    #     the fully qualified name of the type (as in
-    #     `path/google.protobuf.Duration`). The name should be in a canonical form
-    #     (e.g., leading "." is not accepted).
-    #
-    #     In practice, teams usually precompile into the binary all types that they
-    #     expect it to use in the context of Any. However, for URLs which use the
-    #     scheme `http`, `https`, or no scheme, one can optionally set up a type
-    #     server that maps type URLs to message definitions as follows:
-    #
-    #     * If no scheme is provided, `https` is assumed.
-    #     * An HTTP GET on the URL must yield a {Google::Protobuf::Type}
-    #       value in binary format, or produce an error.
-    #     * Applications are allowed to cache lookup results based on the
-    #       URL, or have them precompiled into a binary to avoid any
-    #       lookup. Therefore, binary compatibility needs to be preserved
-    #       on changes to types. (Use versioned type names to manage
-    #       breaking changes.)
-    #
-    #     Note: this functionality is not currently available in the official
-    #     protobuf release, and it is not used for type URLs beginning with
-    #     type.googleapis.com.
-    #
-    #     Schemes other than `http`, `https` (or the empty scheme) might be
-    #     used with implementation specific semantics.
-    # @!attribute [rw] value
-    #   @return [String]
-    #     Must be a valid serialized protocol buffer of the above specified type.
-    class Any; end
-  end
-end

data/lib/google/cloud/monitoring/v3/doc/google/protobuf/duration.rb

@@ -1,91 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Protobuf
-    # A Duration represents a signed, fixed-length span of time represented
-    # as a count of seconds and fractions of seconds at nanosecond
-    # resolution. It is independent of any calendar and concepts like "day"
-    # or "month". It is related to Timestamp in that the difference between
-    # two Timestamp values is a Duration and it can be added or subtracted
-    # from a Timestamp. Range is approximately +-10,000 years.
-    #
-    # = Examples
-    #
-    # Example 1: Compute Duration from two Timestamps in pseudo code.
-    #
-    #     Timestamp start = ...;
-    #     Timestamp end = ...;
-    #     Duration duration = ...;
-    #
-    #     duration.seconds = end.seconds - start.seconds;
-    #     duration.nanos = end.nanos - start.nanos;
-    #
-    #     if (duration.seconds < 0 && duration.nanos > 0) {
-    #       duration.seconds += 1;
-    #       duration.nanos -= 1000000000;
-    #     } else if (durations.seconds > 0 && duration.nanos < 0) {
-    #       duration.seconds -= 1;
-    #       duration.nanos += 1000000000;
-    #     }
-    #
-    # Example 2: Compute Timestamp from Timestamp + Duration in pseudo code.
-    #
-    #     Timestamp start = ...;
-    #     Duration duration = ...;
-    #     Timestamp end = ...;
-    #
-    #     end.seconds = start.seconds + duration.seconds;
-    #     end.nanos = start.nanos + duration.nanos;
-    #
-    #     if (end.nanos < 0) {
-    #       end.seconds -= 1;
-    #       end.nanos += 1000000000;
-    #     } else if (end.nanos >= 1000000000) {
-    #       end.seconds += 1;
-    #       end.nanos -= 1000000000;
-    #     }
-    #
-    # Example 3: Compute Duration from datetime.timedelta in Python.
-    #
-    #     td = datetime.timedelta(days=3, minutes=10)
-    #     duration = Duration()
-    #     duration.FromTimedelta(td)
-    #
-    # = JSON Mapping
-    #
-    # In JSON format, the Duration type is encoded as a string rather than an
-    # object, where the string ends in the suffix "s" (indicating seconds) and
-    # is preceded by the number of seconds, with nanoseconds expressed as
-    # fractional seconds. For example, 3 seconds with 0 nanoseconds should be
-    # encoded in JSON format as "3s", while 3 seconds and 1 nanosecond should
-    # be expressed in JSON format as "3.000000001s", and 3 seconds and 1
-    # microsecond should be expressed in JSON format as "3.000001s".
-    # @!attribute [rw] seconds
-    #   @return [Integer]
-    #     Signed seconds of the span of time. Must be from -315,576,000,000
-    #     to +315,576,000,000 inclusive. Note: these bounds are computed from:
-    #     60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
-    # @!attribute [rw] nanos
-    #   @return [Integer]
-    #     Signed fractions of a second at nanosecond resolution of the span
-    #     of time. Durations less than one second are represented with a 0
-    #     `seconds` field and a positive or negative `nanos` field. For durations
-    #     of one second or more, a non-zero value for the `nanos` field must be
-    #     of the same sign as the `seconds` field. Must be from -999,999,999
-    #     to +999,999,999 inclusive.
-    class Duration; end
-  end
-end

data/lib/google/cloud/monitoring/v3/doc/google/protobuf/empty.rb

@@ -1,29 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Protobuf
-    # A generic empty message that you can re-use to avoid defining duplicated
-    # empty messages in your APIs. A typical example is to use it as the request
-    # or the response type of an API method. For instance:
-    #
-    #     service Foo {
-    #       rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty);
-    #     }
-    #
-    # The JSON representation for `Empty` is empty JSON object `{}`.
-    class Empty; end
-  end
-end

data/lib/google/cloud/monitoring/v3/doc/google/protobuf/field_mask.rb

@@ -1,222 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Protobuf
-    # `FieldMask` represents a set of symbolic field paths, for example:
-    #
-    #     paths: "f.a"
-    #     paths: "f.b.d"
-    #
-    # Here `f` represents a field in some root message, `a` and `b`
-    # fields in the message found in `f`, and `d` a field found in the
-    # message in `f.b`.
-    #
-    # Field masks are used to specify a subset of fields that should be
-    # returned by a get operation or modified by an update operation.
-    # Field masks also have a custom JSON encoding (see below).
-    #
-    # = Field Masks in Projections
-    #
-    # When used in the context of a projection, a response message or
-    # sub-message is filtered by the API to only contain those fields as
-    # specified in the mask. For example, if the mask in the previous
-    # example is applied to a response message as follows:
-    #
-    #     f {
-    #       a : 22
-    #       b {
-    #         d : 1
-    #         x : 2
-    #       }
-    #       y : 13
-    #     }
-    #     z: 8
-    #
-    # The result will not contain specific values for fields x,y and z
-    # (their value will be set to the default, and omitted in proto text
-    # output):
-    #
-    #
-    #     f {
-    #       a : 22
-    #       b {
-    #         d : 1
-    #       }
-    #     }
-    #
-    # A repeated field is not allowed except at the last position of a
-    # paths string.
-    #
-    # If a FieldMask object is not present in a get operation, the
-    # operation applies to all fields (as if a FieldMask of all fields
-    # had been specified).
-    #
-    # Note that a field mask does not necessarily apply to the
-    # top-level response message. In case of a REST get operation, the
-    # field mask applies directly to the response, but in case of a REST
-    # list operation, the mask instead applies to each individual message
-    # in the returned resource list. In case of a REST custom method,
-    # other definitions may be used. Where the mask applies will be
-    # clearly documented together with its declaration in the API.  In
-    # any case, the effect on the returned resource/resources is required
-    # behavior for APIs.
-    #
-    # = Field Masks in Update Operations
-    #
-    # A field mask in update operations specifies which fields of the
-    # targeted resource are going to be updated. The API is required
-    # to only change the values of the fields as specified in the mask
-    # and leave the others untouched. If a resource is passed in to
-    # describe the updated values, the API ignores the values of all
-    # fields not covered by the mask.
-    #
-    # If a repeated field is specified for an update operation, new values will
-    # be appended to the existing repeated field in the target resource. Note that
-    # a repeated field is only allowed in the last position of a `paths` string.
-    #
-    # If a sub-message is specified in the last position of the field mask for an
-    # update operation, then new value will be merged into the existing sub-message
-    # in the target resource.
-    #
-    # For example, given the target message:
-    #
-    #     f {
-    #       b {
-    #         d: 1
-    #         x: 2
-    #       }
-    #       c: [1]
-    #     }
-    #
-    # And an update message:
-    #
-    #     f {
-    #       b {
-    #         d: 10
-    #       }
-    #       c: [2]
-    #     }
-    #
-    # then if the field mask is:
-    #
-    #  paths: ["f.b", "f.c"]
-    #
-    # then the result will be:
-    #
-    #     f {
-    #       b {
-    #         d: 10
-    #         x: 2
-    #       }
-    #       c: [1, 2]
-    #     }
-    #
-    # An implementation may provide options to override this default behavior for
-    # repeated and message fields.
-    #
-    # In order to reset a field's value to the default, the field must
-    # be in the mask and set to the default value in the provided resource.
-    # Hence, in order to reset all fields of a resource, provide a default
-    # instance of the resource and set all fields in the mask, or do
-    # not provide a mask as described below.
-    #
-    # If a field mask is not present on update, the operation applies to
-    # all fields (as if a field mask of all fields has been specified).
-    # Note that in the presence of schema evolution, this may mean that
-    # fields the client does not know and has therefore not filled into
-    # the request will be reset to their default. If this is unwanted
-    # behavior, a specific service may require a client to always specify
-    # a field mask, producing an error if not.
-    #
-    # As with get operations, the location of the resource which
-    # describes the updated values in the request message depends on the
-    # operation kind. In any case, the effect of the field mask is
-    # required to be honored by the API.
-    #
-    # == Considerations for HTTP REST
-    #
-    # The HTTP kind of an update operation which uses a field mask must
-    # be set to PATCH instead of PUT in order to satisfy HTTP semantics
-    # (PUT must only be used for full updates).
-    #
-    # = JSON Encoding of Field Masks
-    #
-    # In JSON, a field mask is encoded as a single string where paths are
-    # separated by a comma. Fields name in each path are converted
-    # to/from lower-camel naming conventions.
-    #
-    # As an example, consider the following message declarations:
-    #
-    #     message Profile {
-    #       User user = 1;
-    #       Photo photo = 2;
-    #     }
-    #     message User {
-    #       string display_name = 1;
-    #       string address = 2;
-    #     }
-    #
-    # In proto a field mask for `Profile` may look as such:
-    #
-    #     mask {
-    #       paths: "user.display_name"
-    #       paths: "photo"
-    #     }
-    #
-    # In JSON, the same mask is represented as below:
-    #
-    #     {
-    #       mask: "user.displayName,photo"
-    #     }
-    #
-    # = Field Masks and Oneof Fields
-    #
-    # Field masks treat fields in oneofs just as regular fields. Consider the
-    # following message:
-    #
-    #     message SampleMessage {
-    #       oneof test_oneof {
-    #         string name = 4;
-    #         SubMessage sub_message = 9;
-    #       }
-    #     }
-    #
-    # The field mask can be:
-    #
-    #     mask {
-    #       paths: "name"
-    #     }
-    #
-    # Or:
-    #
-    #     mask {
-    #       paths: "sub_message"
-    #     }
-    #
-    # Note that oneof type names ("test_oneof" in this case) cannot be used in
-    # paths.
-    #
-    # == Field Mask Verification
-    #
-    # The implementation of any API method which has a FieldMask type field in the
-    # request should verify the included field paths, and return an
-    # `INVALID_ARGUMENT` error if any path is duplicated or unmappable.
-    # @!attribute [rw] paths
-    #   @return [Array<String>]
-    #     The set of field mask paths.
-    class FieldMask; end
-  end
-end