google-cloud-gke_multi_cloud-v1 0.6.0 → 0.8.0

data/lib/google/cloud/gke_multi_cloud/v1/attached_clusters/rest/operations.rb

@@ -0,0 +1,895 @@
+# frozen_string_literal: true
+
+# Copyright 2023 Google LLC
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Auto-generated by gapic-generator-ruby. DO NOT EDIT!
+
+require "gapic/operation"
+
+module Google
+  module Cloud
+    module GkeMultiCloud
+      module V1
+        module AttachedClusters
+          module Rest
+            # Service that implements Longrunning Operations API.
+            class Operations
+              # @private
+              DEFAULT_ENDPOINT_TEMPLATE = "gkemulticloud.$UNIVERSE_DOMAIN$"
+
+              # @private
+              attr_reader :operations_stub
+
+              ##
+              # Configuration for the AttachedClusters Operations API.
+              #
+              # @yield [config] Configure the Operations client.
+              # @yieldparam config [Operations::Configuration]
+              #
+              # @return [Operations::Configuration]
+              #
+              def self.configure
+                @configure ||= Operations::Configuration.new
+                yield @configure if block_given?
+                @configure
+              end
+
+              ##
+              # Configure the AttachedClusters Operations instance.
+              #
+              # The configuration is set to the derived mode, meaning that values can be changed,
+              # but structural changes (adding new fields, etc.) are not allowed. Structural changes
+              # should be made on {Operations.configure}.
+              #
+              # @yield [config] Configure the Operations client.
+              # @yieldparam config [Operations::Configuration]
+              #
+              # @return [Operations::Configuration]
+              #
+              def configure
+                yield @config if block_given?
+                @config
+              end
+
+              ##
+              # The effective universe domain
+              #
+              # @return [String]
+              #
+              def universe_domain
+                @operations_stub.universe_domain
+              end
+
+              ##
+              # Create a new Operations client object.
+              #
+              # @yield [config] Configure the Client client.
+              # @yieldparam config [Operations::Configuration]
+              #
+              def initialize
+                # Create the configuration object
+                @config = Configuration.new Operations.configure
+
+                # Yield the configuration if needed
+                yield @config if block_given?
+
+                # Create credentials
+                credentials = @config.credentials
+                credentials ||= Credentials.default scope: @config.scope
+                if credentials.is_a?(::String) || credentials.is_a?(::Hash)
+                  credentials = Credentials.new credentials, scope: @config.scope
+                end
+
+                @quota_project_id = @config.quota_project
+                @quota_project_id ||= credentials.quota_project_id if credentials.respond_to? :quota_project_id
+
+                @operations_stub = OperationsServiceStub.new(
+                  endpoint: @config.endpoint,
+                  endpoint_template: DEFAULT_ENDPOINT_TEMPLATE,
+                  universe_domain: @config.universe_domain,
+                  credentials: credentials
+                )
+
+                # Used by an LRO wrapper for some methods of this service
+                @operations_client = self
+              end
+
+              # Service calls
+
+              ##
+              # Lists operations that match the specified filter in the request. If the
+              # server doesn't support this method, it returns `UNIMPLEMENTED`.
+              #
+              # NOTE: the `name` binding allows API services to override the binding
+              # to use different resource name schemes, such as `users/*/operations`. To
+              # override the binding, API services can add a binding such as
+              # `"/v1/{name=users/*}/operations"` to their service configuration.
+              # For backwards compatibility, the default name includes the operations
+              # collection id, however overriding users must ensure the name binding
+              # is the parent resource, without the operations collection id.
+              #
+              # @overload list_operations(request, options = nil)
+              #   Pass arguments to `list_operations` via a request object, either of type
+              #   {::Google::Longrunning::ListOperationsRequest} or an equivalent Hash.
+              #
+              #   @param request [::Google::Longrunning::ListOperationsRequest, ::Hash]
+              #     A request object representing the call parameters. Required. To specify no
+              #     parameters, or to keep all the default parameter values, pass an empty Hash.
+              #   @param options [::Gapic::CallOptions, ::Hash]
+              #     Overrides the default settings for this call, e.g, timeout, retries etc. Optional.
+              #
+              # @overload list_operations(name: nil, filter: nil, page_size: nil, page_token: nil)
+              #   Pass arguments to `list_operations` via keyword arguments. Note that at
+              #   least one keyword argument is required. To specify no parameters, or to keep all
+              #   the default parameter values, pass an empty Hash as a request object (see above).
+              #
+              #   @param name [::String]
+              #     The name of the operation's parent resource.
+              #   @param filter [::String]
+              #     The standard list filter.
+              #   @param page_size [::Integer]
+              #     The standard list page size.
+              #   @param page_token [::String]
+              #     The standard list page token.
+              # @yield [result, operation] Access the result along with the TransportOperation object
+              # @yieldparam result [::Gapic::Operation]
+              # @yieldparam operation [::Gapic::Rest::TransportOperation]
+              #
+              # @return [::Gapic::Operation]
+              #
+              # @raise [::Google::Cloud::Error] if the REST call is aborted.
+              #
+              # @example Basic example
+              #   require "google/longrunning"
+              #
+              #   # Create a client object. The client can be reused for multiple calls.
+              #   client = Google::Longrunning::Operations::Rest::Client.new
+              #
+              #   # Create a request. To set request fields, pass in keyword arguments.
+              #   request = Google::Longrunning::ListOperationsRequest.new
+              #
+              #   # Call the list_operations method.
+              #   result = client.list_operations request
+              #
+              #   # The returned object is of type Gapic::PagedEnumerable. You can iterate
+              #   # over elements, and API calls will be issued to fetch pages as needed.
+              #   result.each do |item|
+              #     # Each element is of type ::Google::Longrunning::Operation.
+              #     p item
+              #   end
+              #
+              def list_operations request, options = nil
+                raise ::ArgumentError, "request must be provided" if request.nil?
+
+                request = ::Gapic::Protobuf.coerce request, to: ::Google::Longrunning::ListOperationsRequest
+
+                # Converts hash and nil to an options object
+                options = ::Gapic::CallOptions.new(**options.to_h) if options.respond_to? :to_h
+
+                # Customize the options with defaults
+                call_metadata = @config.rpcs.list_operations.metadata.to_h
+
+                # Set x-goog-api-client and x-goog-user-project headers
+                call_metadata[:"x-goog-api-client"] ||= ::Gapic::Headers.x_goog_api_client \
+                  lib_name: @config.lib_name, lib_version: @config.lib_version,
+                  gapic_version: ::Google::Cloud::GkeMultiCloud::V1::VERSION,
+                  transports_version_send: [:rest]
+
+                call_metadata[:"x-goog-user-project"] = @quota_project_id if @quota_project_id
+
+                options.apply_defaults timeout:      @config.rpcs.list_operations.timeout,
+                                       metadata:     call_metadata,
+                                       retry_policy: @config.rpcs.list_operations.retry_policy
+
+                options.apply_defaults timeout:      @config.timeout,
+                                       metadata:     @config.metadata,
+                                       retry_policy: @config.retry_policy
+
+                @operations_stub.list_operations request, options do |result, operation|
+                  result = ::Gapic::Rest::PagedEnumerable.new @operations_stub, :list_operations, "operations", request, result, options
+                  yield result, operation if block_given?
+                  return result
+                end
+              rescue ::Gapic::Rest::Error => e
+                raise ::Google::Cloud::Error.from_error(e)
+              end
+
+              ##
+              # Gets the latest state of a long-running operation.  Clients can use this
+              # method to poll the operation result at intervals as recommended by the API
+              # service.
+              #
+              # @overload get_operation(request, options = nil)
+              #   Pass arguments to `get_operation` via a request object, either of type
+              #   {::Google::Longrunning::GetOperationRequest} or an equivalent Hash.
+              #
+              #   @param request [::Google::Longrunning::GetOperationRequest, ::Hash]
+              #     A request object representing the call parameters. Required. To specify no
+              #     parameters, or to keep all the default parameter values, pass an empty Hash.
+              #   @param options [::Gapic::CallOptions, ::Hash]
+              #     Overrides the default settings for this call, e.g, timeout, retries etc. Optional.
+              #
+              # @overload get_operation(name: nil)
+              #   Pass arguments to `get_operation` via keyword arguments. Note that at
+              #   least one keyword argument is required. To specify no parameters, or to keep all
+              #   the default parameter values, pass an empty Hash as a request object (see above).
+              #
+              #   @param name [::String]
+              #     The name of the operation resource.
+              # @yield [result, operation] Access the result along with the TransportOperation object
+              # @yieldparam result [::Gapic::Operation]
+              # @yieldparam operation [::Gapic::Rest::TransportOperation]
+              #
+              # @return [::Gapic::Operation]
+              #
+              # @raise [::Google::Cloud::Error] if the REST call is aborted.
+              #
+              # @example Basic example
+              #   require "google/longrunning"
+              #
+              #   # Create a client object. The client can be reused for multiple calls.
+              #   client = Google::Longrunning::Operations::Rest::Client.new
+              #
+              #   # Create a request. To set request fields, pass in keyword arguments.
+              #   request = Google::Longrunning::GetOperationRequest.new
+              #
+              #   # Call the get_operation method.
+              #   result = client.get_operation request
+              #
+              #   # The returned object is of type Gapic::Operation. You can use it to
+              #   # check the status of an operation, cancel it, or wait for results.
+              #   # Here is how to wait for a response.
+              #   result.wait_until_done! timeout: 60
+              #   if result.response?
+              #     p result.response
+              #   else
+              #     puts "No response received."
+              #   end
+              #
+              def get_operation request, options = nil
+                raise ::ArgumentError, "request must be provided" if request.nil?
+
+                request = ::Gapic::Protobuf.coerce request, to: ::Google::Longrunning::GetOperationRequest
+
+                # Converts hash and nil to an options object
+                options = ::Gapic::CallOptions.new(**options.to_h) if options.respond_to? :to_h
+
+                # Customize the options with defaults
+                call_metadata = @config.rpcs.get_operation.metadata.to_h
+
+                # Set x-goog-api-client and x-goog-user-project headers
+                call_metadata[:"x-goog-api-client"] ||= ::Gapic::Headers.x_goog_api_client \
+                  lib_name: @config.lib_name, lib_version: @config.lib_version,
+                  gapic_version: ::Google::Cloud::GkeMultiCloud::V1::VERSION,
+                  transports_version_send: [:rest]
+
+                call_metadata[:"x-goog-user-project"] = @quota_project_id if @quota_project_id
+
+                options.apply_defaults timeout:      @config.rpcs.get_operation.timeout,
+                                       metadata:     call_metadata,
+                                       retry_policy: @config.rpcs.get_operation.retry_policy
+
+                options.apply_defaults timeout:      @config.timeout,
+                                       metadata:     @config.metadata,
+                                       retry_policy: @config.retry_policy
+
+                @operations_stub.get_operation request, options do |result, operation|
+                  result = ::Gapic::Operation.new result, @operations_client, options: options
+                  yield result, operation if block_given?
+                  return result
+                end
+              rescue ::Gapic::Rest::Error => e
+                raise ::Google::Cloud::Error.from_error(e)
+              end
+
+              ##
+              # Deletes a long-running operation. This method indicates that the client is
+              # no longer interested in the operation result. It does not cancel the
+              # operation. If the server doesn't support this method, it returns
+              # `google.rpc.Code.UNIMPLEMENTED`.
+              #
+              # @overload delete_operation(request, options = nil)
+              #   Pass arguments to `delete_operation` via a request object, either of type
+              #   {::Google::Longrunning::DeleteOperationRequest} or an equivalent Hash.
+              #
+              #   @param request [::Google::Longrunning::DeleteOperationRequest, ::Hash]
+              #     A request object representing the call parameters. Required. To specify no
+              #     parameters, or to keep all the default parameter values, pass an empty Hash.
+              #   @param options [::Gapic::CallOptions, ::Hash]
+              #     Overrides the default settings for this call, e.g, timeout, retries etc. Optional.
+              #
+              # @overload delete_operation(name: nil)
+              #   Pass arguments to `delete_operation` via keyword arguments. Note that at
+              #   least one keyword argument is required. To specify no parameters, or to keep all
+              #   the default parameter values, pass an empty Hash as a request object (see above).
+              #
+              #   @param name [::String]
+              #     The name of the operation resource to be deleted.
+              # @yield [result, operation] Access the result along with the TransportOperation object
+              # @yieldparam result [::Google::Protobuf::Empty]
+              # @yieldparam operation [::Gapic::Rest::TransportOperation]
+              #
+              # @return [::Google::Protobuf::Empty]
+              #
+              # @raise [::Google::Cloud::Error] if the REST call is aborted.
+              #
+              # @example Basic example
+              #   require "google/longrunning"
+              #
+              #   # Create a client object. The client can be reused for multiple calls.
+              #   client = Google::Longrunning::Operations::Rest::Client.new
+              #
+              #   # Create a request. To set request fields, pass in keyword arguments.
+              #   request = Google::Longrunning::DeleteOperationRequest.new
+              #
+              #   # Call the delete_operation method.
+              #   result = client.delete_operation request
+              #
+              #   # The returned object is of type Google::Protobuf::Empty.
+              #   p result
+              #
+              def delete_operation request, options = nil
+                raise ::ArgumentError, "request must be provided" if request.nil?
+
+                request = ::Gapic::Protobuf.coerce request, to: ::Google::Longrunning::DeleteOperationRequest
+
+                # Converts hash and nil to an options object
+                options = ::Gapic::CallOptions.new(**options.to_h) if options.respond_to? :to_h
+
+                # Customize the options with defaults
+                call_metadata = @config.rpcs.delete_operation.metadata.to_h
+
+                # Set x-goog-api-client and x-goog-user-project headers
+                call_metadata[:"x-goog-api-client"] ||= ::Gapic::Headers.x_goog_api_client \
+                  lib_name: @config.lib_name, lib_version: @config.lib_version,
+                  gapic_version: ::Google::Cloud::GkeMultiCloud::V1::VERSION,
+                  transports_version_send: [:rest]
+
+                call_metadata[:"x-goog-user-project"] = @quota_project_id if @quota_project_id
+
+                options.apply_defaults timeout:      @config.rpcs.delete_operation.timeout,
+                                       metadata:     call_metadata,
+                                       retry_policy: @config.rpcs.delete_operation.retry_policy
+
+                options.apply_defaults timeout:      @config.timeout,
+                                       metadata:     @config.metadata,
+                                       retry_policy: @config.retry_policy
+
+                @operations_stub.delete_operation request, options do |result, operation|
+                  yield result, operation if block_given?
+                  return result
+                end
+              rescue ::Gapic::Rest::Error => e
+                raise ::Google::Cloud::Error.from_error(e)
+              end
+
+              ##
+              # Starts asynchronous cancellation on a long-running operation.  The server
+              # makes a best effort to cancel the operation, but success is not
+              # guaranteed.  If the server doesn't support this method, it returns
+              # `google.rpc.Code.UNIMPLEMENTED`.  Clients can use
+              # Operations.GetOperation or
+              # other methods to check whether the cancellation succeeded or whether the
+              # operation completed despite cancellation. On successful cancellation,
+              # the operation is not deleted; instead, it becomes an operation with
+              # an {::Google::Longrunning::Operation#error Operation.error} value with a {::Google::Rpc::Status#code google.rpc.Status.code} of 1,
+              # corresponding to `Code.CANCELLED`.
+              #
+              # @overload cancel_operation(request, options = nil)
+              #   Pass arguments to `cancel_operation` via a request object, either of type
+              #   {::Google::Longrunning::CancelOperationRequest} or an equivalent Hash.
+              #
+              #   @param request [::Google::Longrunning::CancelOperationRequest, ::Hash]
+              #     A request object representing the call parameters. Required. To specify no
+              #     parameters, or to keep all the default parameter values, pass an empty Hash.
+              #   @param options [::Gapic::CallOptions, ::Hash]
+              #     Overrides the default settings for this call, e.g, timeout, retries etc. Optional.
+              #
+              # @overload cancel_operation(name: nil)
+              #   Pass arguments to `cancel_operation` via keyword arguments. Note that at
+              #   least one keyword argument is required. To specify no parameters, or to keep all
+              #   the default parameter values, pass an empty Hash as a request object (see above).
+              #
+              #   @param name [::String]
+              #     The name of the operation resource to be cancelled.
+              # @yield [result, operation] Access the result along with the TransportOperation object
+              # @yieldparam result [::Google::Protobuf::Empty]
+              # @yieldparam operation [::Gapic::Rest::TransportOperation]
+              #
+              # @return [::Google::Protobuf::Empty]
+              #
+              # @raise [::Google::Cloud::Error] if the REST call is aborted.
+              #
+              # @example Basic example
+              #   require "google/longrunning"
+              #
+              #   # Create a client object. The client can be reused for multiple calls.
+              #   client = Google::Longrunning::Operations::Rest::Client.new
+              #
+              #   # Create a request. To set request fields, pass in keyword arguments.
+              #   request = Google::Longrunning::CancelOperationRequest.new
+              #
+              #   # Call the cancel_operation method.
+              #   result = client.cancel_operation request
+              #
+              #   # The returned object is of type Google::Protobuf::Empty.
+              #   p result
+              #
+              def cancel_operation request, options = nil
+                raise ::ArgumentError, "request must be provided" if request.nil?
+
+                request = ::Gapic::Protobuf.coerce request, to: ::Google::Longrunning::CancelOperationRequest
+
+                # Converts hash and nil to an options object
+                options = ::Gapic::CallOptions.new(**options.to_h) if options.respond_to? :to_h
+
+                # Customize the options with defaults
+                call_metadata = @config.rpcs.cancel_operation.metadata.to_h
+
+                # Set x-goog-api-client and x-goog-user-project headers
+                call_metadata[:"x-goog-api-client"] ||= ::Gapic::Headers.x_goog_api_client \
+                  lib_name: @config.lib_name, lib_version: @config.lib_version,
+                  gapic_version: ::Google::Cloud::GkeMultiCloud::V1::VERSION,
+                  transports_version_send: [:rest]
+
+                call_metadata[:"x-goog-user-project"] = @quota_project_id if @quota_project_id
+
+                options.apply_defaults timeout:      @config.rpcs.cancel_operation.timeout,
+                                       metadata:     call_metadata,
+                                       retry_policy: @config.rpcs.cancel_operation.retry_policy
+
+                options.apply_defaults timeout:      @config.timeout,
+                                       metadata:     @config.metadata,
+                                       retry_policy: @config.retry_policy
+
+                @operations_stub.cancel_operation request, options do |result, operation|
+                  yield result, operation if block_given?
+                  return result
+                end
+              rescue ::Gapic::Rest::Error => e
+                raise ::Google::Cloud::Error.from_error(e)
+              end
+
+              ##
+              # Configuration class for the Operations REST API.
+              #
+              # This class represents the configuration for Operations REST,
+              # providing control over timeouts, retry behavior, logging, transport
+              # parameters, and other low-level controls. Certain parameters can also be
+              # applied individually to specific RPCs. See
+              # {::Google::Longrunning::Operations::Rest::Client::Configuration::Rpcs}
+              # for a list of RPCs that can be configured independently.
+              #
+              # Configuration can be applied globally to all clients, or to a single client
+              # on construction.
+              #
+              # @example
+              #
+              #   # Modify the global config, setting the timeout for
+              #   # list_operations to 20 seconds,
+              #   # and all remaining timeouts to 10 seconds.
+              #   ::Google::Longrunning::Operations::Rest::Client.configure do |config|
+              #     config.timeout = 10.0
+              #     config.rpcs.list_operations.timeout = 20.0
+              #   end
+              #
+              #   # Apply the above configuration only to a new client.
+              #   client = ::Google::Longrunning::Operations::Rest::Client.new do |config|
+              #     config.timeout = 10.0
+              #     config.rpcs.list_operations.timeout = 20.0
+              #   end
+              #
+              # @!attribute [rw] endpoint
+              #   A custom service endpoint, as a hostname or hostname:port. The default is
+              #   nil, indicating to use the default endpoint in the current universe domain.
+              #   @return [::String,nil]
+              # @!attribute [rw] credentials
+              #   Credentials to send with calls. You may provide any of the following types:
+              #    *  (`String`) The path to a service account key file in JSON format
+              #    *  (`Hash`) A service account key as a Hash
+              #    *  (`Google::Auth::Credentials`) A googleauth credentials object
+              #       (see the [googleauth docs](https://rubydoc.info/gems/googleauth/Google/Auth/Credentials))
+              #    *  (`Signet::OAuth2::Client`) A signet oauth2 client object
+              #       (see the [signet docs](https://rubydoc.info/gems/signet/Signet/OAuth2/Client))
+              #    *  (`nil`) indicating no credentials
+              #   @return [::Object]
+              # @!attribute [rw] scope
+              #   The OAuth scopes
+              #   @return [::Array<::String>]
+              # @!attribute [rw] lib_name
+              #   The library name as recorded in instrumentation and logging
+              #   @return [::String]
+              # @!attribute [rw] lib_version
+              #   The library version as recorded in instrumentation and logging
+              #   @return [::String]
+              # @!attribute [rw] timeout
+              #   The call timeout in seconds.
+              #   @return [::Numeric]
+              # @!attribute [rw] metadata
+              #   Additional headers to be sent with the call.
+              #   @return [::Hash{::Symbol=>::String}]
+              # @!attribute [rw] retry_policy
+              #   The retry policy. The value is a hash with the following keys:
+              #    *  `:initial_delay` (*type:* `Numeric`) - The initial delay in seconds.
+              #    *  `:max_delay` (*type:* `Numeric`) - The max delay in seconds.
+              #    *  `:multiplier` (*type:* `Numeric`) - The incremental backoff multiplier.
+              #    *  `:retry_codes` (*type:* `Array<String>`) - The error codes that should
+              #       trigger a retry.
+              #   @return [::Hash]
+              # @!attribute [rw] quota_project
+              #   A separate project against which to charge quota.
+              #   @return [::String]
+              # @!attribute [rw] universe_domain
+              #   The universe domain within which to make requests. This determines the
+              #   default endpoint URL. The default value of nil uses the environment
+              #   universe (usually the default "googleapis.com" universe).
+              #   @return [::String,nil]
+              #
+              class Configuration
+                extend ::Gapic::Config
+
+                # @private
+                # The endpoint specific to the default "googleapis.com" universe. Deprecated.
+                DEFAULT_ENDPOINT = "gkemulticloud.googleapis.com"
+
+                config_attr :endpoint,      nil, ::String, nil
+                config_attr :credentials,   nil do |value|
+                  allowed = [::String, ::Hash, ::Proc, ::Symbol, ::Google::Auth::Credentials, ::Signet::OAuth2::Client, nil]
+                  allowed.any? { |klass| klass === value }
+                end
+                config_attr :scope,         nil, ::String, ::Array, nil
+                config_attr :lib_name,      nil, ::String, nil
+                config_attr :lib_version,   nil, ::String, nil
+                config_attr :timeout,       nil, ::Numeric, nil
+                config_attr :metadata,      nil, ::Hash, nil
+                config_attr :retry_policy,  nil, ::Hash, ::Proc, nil
+                config_attr :quota_project, nil, ::String, nil
+                config_attr :universe_domain, nil, ::String, nil
+
+                # @private
+                def initialize parent_config = nil
+                  @parent_config = parent_config unless parent_config.nil?
+
+                  yield self if block_given?
+                end
+
+                ##
+                # Configurations for individual RPCs
+                # @return [Rpcs]
+                #
+                def rpcs
+                  @rpcs ||= begin
+                    parent_rpcs = nil
+                    parent_rpcs = @parent_config.rpcs if defined?(@parent_config) && @parent_config.respond_to?(:rpcs)
+                    Rpcs.new parent_rpcs
+                  end
+                end
+
+                ##
+                # Configuration RPC class for the Operations API.
+                #
+                # Includes fields providing the configuration for each RPC in this service.
+                # Each configuration object is of type `Gapic::Config::Method` and includes
+                # the following configuration fields:
+                #
+                #  *  `timeout` (*type:* `Numeric`) - The call timeout in seconds
+                #  *  `metadata` (*type:* `Hash{Symbol=>String}`) - Additional headers
+                #  *  `retry_policy (*type:* `Hash`) - The retry policy. The policy fields
+                #     include the following keys:
+                #      *  `:initial_delay` (*type:* `Numeric`) - The initial delay in seconds.
+                #      *  `:max_delay` (*type:* `Numeric`) - The max delay in seconds.
+                #      *  `:multiplier` (*type:* `Numeric`) - The incremental backoff multiplier.
+                #      *  `:retry_codes` (*type:* `Array<String>`) - The error codes that should
+                #         trigger a retry.
+                #
+                class Rpcs
+                  ##
+                  # RPC-specific configuration for `list_operations`
+                  # @return [::Gapic::Config::Method]
+                  #
+                  attr_reader :list_operations
+                  ##
+                  # RPC-specific configuration for `get_operation`
+                  # @return [::Gapic::Config::Method]
+                  #
+                  attr_reader :get_operation
+                  ##
+                  # RPC-specific configuration for `delete_operation`
+                  # @return [::Gapic::Config::Method]
+                  #
+                  attr_reader :delete_operation
+                  ##
+                  # RPC-specific configuration for `cancel_operation`
+                  # @return [::Gapic::Config::Method]
+                  #
+                  attr_reader :cancel_operation
+
+                  # @private
+                  def initialize parent_rpcs = nil
+                    list_operations_config = parent_rpcs.list_operations if parent_rpcs.respond_to? :list_operations
+                    @list_operations = ::Gapic::Config::Method.new list_operations_config
+                    get_operation_config = parent_rpcs.get_operation if parent_rpcs.respond_to? :get_operation
+                    @get_operation = ::Gapic::Config::Method.new get_operation_config
+                    delete_operation_config = parent_rpcs.delete_operation if parent_rpcs.respond_to? :delete_operation
+                    @delete_operation = ::Gapic::Config::Method.new delete_operation_config
+                    cancel_operation_config = parent_rpcs.cancel_operation if parent_rpcs.respond_to? :cancel_operation
+                    @cancel_operation = ::Gapic::Config::Method.new cancel_operation_config
+
+                    yield self if block_given?
+                  end
+                end
+              end
+            end
+
+            ##
+            # @private
+            # REST service stub for the Longrunning Operations API.
+            # Service stub contains baseline method implementations
+            # including transcoding, making the REST call, and deserialing the response.
+            class OperationsServiceStub
+              def initialize endpoint:, endpoint_template:, universe_domain:, credentials:
+                # These require statements are intentionally placed here to initialize
+                # the REST modules only when it's required.
+                require "gapic/rest"
+
+                @client_stub = ::Gapic::Rest::ClientStub.new endpoint: endpoint,
+                                                             endpoint_template: endpoint_template,
+                                                             universe_domain: universe_domain,
+                                                             credentials: credentials
+              end
+
+              ##
+              # Baseline implementation for the list_operations REST call
+              #
+              # @param request_pb [::Google::Longrunning::ListOperationsRequest]
+              #   A request object representing the call parameters. Required.
+              # @param options [::Gapic::CallOptions]
+              #   Overrides the default settings for this call, e.g, timeout, retries etc. Optional.
+              #
+              # @yield [result, operation] Access the result along with the TransportOperation object
+              # @yieldparam result [::Google::Longrunning::ListOperationsResponse]
+              # @yieldparam operation [::Gapic::Rest::TransportOperation]
+              #
+              # @return [::Google::Longrunning::ListOperationsResponse]
+              #   A result object deserialized from the server's reply
+              def list_operations request_pb, options = nil
+                raise ::ArgumentError, "request must be provided" if request_pb.nil?
+
+                verb, uri, query_string_params, body = OperationsServiceStub.transcode_list_operations_request request_pb
+                query_string_params = if query_string_params.any?
+                                        query_string_params.to_h { |p| p.split "=", 2 }
+                                      else
+                                        {}
+                                      end
+
+                response = @client_stub.make_http_request(
+                  verb,
+                  uri:     uri,
+                  body:    body || "",
+                  params:  query_string_params,
+                  options: options
+                )
+                operation = ::Gapic::Rest::TransportOperation.new response
+                result = ::Google::Longrunning::ListOperationsResponse.decode_json response.body, ignore_unknown_fields: true
+
+                yield result, operation if block_given?
+                result
+              end
+
+              ##
+              # Baseline implementation for the get_operation REST call
+              #
+              # @param request_pb [::Google::Longrunning::GetOperationRequest]
+              #   A request object representing the call parameters. Required.
+              # @param options [::Gapic::CallOptions]
+              #   Overrides the default settings for this call, e.g, timeout, retries etc. Optional.
+              #
+              # @yield [result, operation] Access the result along with the TransportOperation object
+              # @yieldparam result [::Google::Longrunning::Operation]
+              # @yieldparam operation [::Gapic::Rest::TransportOperation]
+              #
+              # @return [::Google::Longrunning::Operation]
+              #   A result object deserialized from the server's reply
+              def get_operation request_pb, options = nil
+                raise ::ArgumentError, "request must be provided" if request_pb.nil?
+
+                verb, uri, query_string_params, body = OperationsServiceStub.transcode_get_operation_request request_pb
+                query_string_params = if query_string_params.any?
+                                        query_string_params.to_h { |p| p.split "=", 2 }
+                                      else
+                                        {}
+                                      end
+
+                response = @client_stub.make_http_request(
+                  verb,
+                  uri:     uri,
+                  body:    body || "",
+                  params:  query_string_params,
+                  options: options
+                )
+                operation = ::Gapic::Rest::TransportOperation.new response
+                result = ::Google::Longrunning::Operation.decode_json response.body, ignore_unknown_fields: true
+
+                yield result, operation if block_given?
+                result
+              end
+
+              ##
+              # Baseline implementation for the delete_operation REST call
+              #
+              # @param request_pb [::Google::Longrunning::DeleteOperationRequest]
+              #   A request object representing the call parameters. Required.
+              # @param options [::Gapic::CallOptions]
+              #   Overrides the default settings for this call, e.g, timeout, retries etc. Optional.
+              #
+              # @yield [result, operation] Access the result along with the TransportOperation object
+              # @yieldparam result [::Google::Protobuf::Empty]
+              # @yieldparam operation [::Gapic::Rest::TransportOperation]
+              #
+              # @return [::Google::Protobuf::Empty]
+              #   A result object deserialized from the server's reply
+              def delete_operation request_pb, options = nil
+                raise ::ArgumentError, "request must be provided" if request_pb.nil?
+
+                verb, uri, query_string_params, body = OperationsServiceStub.transcode_delete_operation_request request_pb
+                query_string_params = if query_string_params.any?
+                                        query_string_params.to_h { |p| p.split "=", 2 }
+                                      else
+                                        {}
+                                      end
+
+                response = @client_stub.make_http_request(
+                  verb,
+                  uri:     uri,
+                  body:    body || "",
+                  params:  query_string_params,
+                  options: options
+                )
+                operation = ::Gapic::Rest::TransportOperation.new response
+                result = ::Google::Protobuf::Empty.decode_json response.body, ignore_unknown_fields: true
+
+                yield result, operation if block_given?
+                result
+              end
+
+              ##
+              # Baseline implementation for the cancel_operation REST call
+              #
+              # @param request_pb [::Google::Longrunning::CancelOperationRequest]
+              #   A request object representing the call parameters. Required.
+              # @param options [::Gapic::CallOptions]
+              #   Overrides the default settings for this call, e.g, timeout, retries etc. Optional.
+              #
+              # @yield [result, operation] Access the result along with the TransportOperation object
+              # @yieldparam result [::Google::Protobuf::Empty]
+              # @yieldparam operation [::Gapic::Rest::TransportOperation]
+              #
+              # @return [::Google::Protobuf::Empty]
+              #   A result object deserialized from the server's reply
+              def cancel_operation request_pb, options = nil
+                raise ::ArgumentError, "request must be provided" if request_pb.nil?
+
+                verb, uri, query_string_params, body = OperationsServiceStub.transcode_cancel_operation_request request_pb
+                query_string_params = if query_string_params.any?
+                                        query_string_params.to_h { |p| p.split "=", 2 }
+                                      else
+                                        {}
+                                      end
+
+                response = @client_stub.make_http_request(
+                  verb,
+                  uri:     uri,
+                  body:    body || "",
+                  params:  query_string_params,
+                  options: options
+                )
+                operation = ::Gapic::Rest::TransportOperation.new response
+                result = ::Google::Protobuf::Empty.decode_json response.body, ignore_unknown_fields: true
+
+                yield result, operation if block_given?
+                result
+              end
+
+              ##
+              # @private
+              #
+              # GRPC transcoding helper method for the list_operations REST call
+              #
+              # @param request_pb [::Google::Longrunning::ListOperationsRequest]
+              #   A request object representing the call parameters. Required.
+              # @return [Array(String, [String, nil], Hash{String => String})]
+              #   Uri, Body, Query string parameters
+              def self.transcode_list_operations_request request_pb
+                transcoder = Gapic::Rest::GrpcTranscoder.new
+                                                        .with_bindings(
+                                                          uri_method: :get,
+                                                          uri_template: "/v1/{name}/operations",
+                                                          matches: [
+                                                            ["name", %r{^projects/[^/]+/locations/[^/]+/?$}, false]
+                                                          ]
+                                                        )
+                transcoder.transcode request_pb
+              end
+
+              ##
+              # @private
+              #
+              # GRPC transcoding helper method for the get_operation REST call
+              #
+              # @param request_pb [::Google::Longrunning::GetOperationRequest]
+              #   A request object representing the call parameters. Required.
+              # @return [Array(String, [String, nil], Hash{String => String})]
+              #   Uri, Body, Query string parameters
+              def self.transcode_get_operation_request request_pb
+                transcoder = Gapic::Rest::GrpcTranscoder.new
+                                                        .with_bindings(
+                                                          uri_method: :get,
+                                                          uri_template: "/v1/{name}",
+                                                          matches: [
+                                                            ["name", %r{^projects/[^/]+/locations/[^/]+/operations/[^/]+/?$}, false]
+                                                          ]
+                                                        )
+                transcoder.transcode request_pb
+              end
+
+              ##
+              # @private
+              #
+              # GRPC transcoding helper method for the delete_operation REST call
+              #
+              # @param request_pb [::Google::Longrunning::DeleteOperationRequest]
+              #   A request object representing the call parameters. Required.
+              # @return [Array(String, [String, nil], Hash{String => String})]
+              #   Uri, Body, Query string parameters
+              def self.transcode_delete_operation_request request_pb
+                transcoder = Gapic::Rest::GrpcTranscoder.new
+                                                        .with_bindings(
+                                                          uri_method: :delete,
+                                                          uri_template: "/v1/{name}",
+                                                          matches: [
+                                                            ["name", %r{^projects/[^/]+/locations/[^/]+/operations/[^/]+/?$}, false]
+                                                          ]
+                                                        )
+                transcoder.transcode request_pb
+              end
+
+              ##
+              # @private
+              #
+              # GRPC transcoding helper method for the cancel_operation REST call
+              #
+              # @param request_pb [::Google::Longrunning::CancelOperationRequest]
+              #   A request object representing the call parameters. Required.
+              # @return [Array(String, [String, nil], Hash{String => String})]
+              #   Uri, Body, Query string parameters
+              def self.transcode_cancel_operation_request request_pb
+                transcoder = Gapic::Rest::GrpcTranscoder.new
+                                                        .with_bindings(
+                                                          uri_method: :post,
+                                                          uri_template: "/v1/{name}:cancel",
+                                                          body: "*",
+                                                          matches: [
+                                                            ["name", %r{^projects/[^/]+/locations/[^/]+/operations/[^/]+/?$}, false]
+                                                          ]
+                                                        )
+                transcoder.transcode request_pb
+              end
+            end
+          end
+        end
+      end
+    end
+  end
+end