google-cloud-dlp 0.3.0 → 0.4.0

data/lib/google/cloud/dlp/v2beta1/dlp_service_client_config.json

@@ -1,66 +0,0 @@
-{
-  "interfaces": {
-    "google.privacy.dlp.v2beta1.DlpService": {
-      "retry_codes": {
-        "idempotent": [
-          "DEADLINE_EXCEEDED",
-          "UNAVAILABLE"
-        ],
-        "non_idempotent": []
-      },
-      "retry_params": {
-        "default": {
-          "initial_retry_delay_millis": 100,
-          "retry_delay_multiplier": 1.3,
-          "max_retry_delay_millis": 60000,
-          "initial_rpc_timeout_millis": 20000,
-          "rpc_timeout_multiplier": 1.0,
-          "max_rpc_timeout_millis": 20000,
-          "total_timeout_millis": 600000
-        }
-      },
-      "methods": {
-        "InspectContent": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "RedactContent": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "DeidentifyContent": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "AnalyzeDataSourceRisk": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "CreateInspectOperation": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "ListInspectFindings": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "ListInfoTypes": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "ListRootCategories": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        }
-      }
-    }
-  }
-}

data/lib/google/cloud/dlp/v2beta1/doc/google/privacy/dlp/v2beta1/dlp.rb

@@ -1,1241 +0,0 @@
-# Copyright 2017 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-module Google
-  module Privacy
-    module Dlp
-      ##
-      # # DLP API Contents
-      #
-      # | Class | Description |
-      # | ----- | ----------- |
-      # | [DlpServiceClient][] | The Google Data Loss Prevention API provides methods for detection of privacy-sensitive fragments in text, images, and Google Cloud Platform storage repositories. |
-      # | [Data Types][] | Data types for Google::Cloud::Dlp::V2beta1 |
-      #
-      # [DlpServiceClient]: https://googlecloudplatform.github.io/google-cloud-ruby/#/docs/google-cloud-dlp/latest/google/privacy/dlp/v2beta1/dlpserviceclient
-      # [Data Types]: https://googlecloudplatform.github.io/google-cloud-ruby/#/docs/google-cloud-dlp/latest/google/privacy/dlp/v2beta1/datatypes
-      #
-      module V2beta1
-        # Configuration description of the scanning process.
-        # When used with redactContent only info_types and min_likelihood are currently
-        # used.
-        # @!attribute [rw] info_types
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::InfoType>]
-        #     Restricts what info_types to look for. The values must correspond to
-        #     InfoType values returned by ListInfoTypes or found in documentation.
-        #     Empty info_types runs all enabled detectors.
-        # @!attribute [rw] min_likelihood
-        #   @return [Google::Privacy::Dlp::V2beta1::Likelihood]
-        #     Only returns findings equal or above this threshold.
-        # @!attribute [rw] max_findings
-        #   @return [Integer]
-        #     Limits the number of findings per content item or long running operation.
-        # @!attribute [rw] include_quote
-        #   @return [true, false]
-        #     When true, a contextual quote from the data that triggered a finding is
-        #     included in the response; see Finding.quote.
-        # @!attribute [rw] exclude_types
-        #   @return [true, false]
-        #     When true, excludes type information of the findings.
-        # @!attribute [rw] info_type_limits
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::InspectConfig::InfoTypeLimit>]
-        #     Configuration of findings limit given for specified info types.
-        # @!attribute [rw] custom_info_types
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::CustomInfoType>]
-        #     Custom info types provided by the user.
-        class InspectConfig
-          # Max findings configuration per info type, per content item or long running
-          # operation.
-          # @!attribute [rw] info_type
-          #   @return [Google::Privacy::Dlp::V2beta1::InfoType]
-          #     Type of information the findings limit applies to. Only one limit per
-          #     info_type should be provided. If InfoTypeLimit does not have an
-          #     info_type, the DLP API applies the limit against all info_types that are
-          #     found but not specified in another InfoTypeLimit.
-          # @!attribute [rw] max_findings
-          #   @return [Integer]
-          #     Max findings limit for the given infoType.
-          class InfoTypeLimit; end
-        end
-
-        # Additional configuration for inspect long running operations.
-        # @!attribute [rw] max_item_findings
-        #   @return [Integer]
-        #     Max number of findings per file, Datastore entity, or database row.
-        class OperationConfig; end
-
-        # Container structure for the content to inspect.
-        # @!attribute [rw] type
-        #   @return [String]
-        #     Type of the content, as defined in Content-Type HTTP header.
-        #     Supported types are: all "text" types, octet streams, PNG images,
-        #     JPEG images.
-        # @!attribute [rw] data
-        #   @return [String]
-        #     Content data to inspect or redact.
-        # @!attribute [rw] value
-        #   @return [String]
-        #     String data to inspect or redact.
-        # @!attribute [rw] table
-        #   @return [Google::Privacy::Dlp::V2beta1::Table]
-        #     Structured content for inspection.
-        class ContentItem; end
-
-        # Structured content to inspect. Up to 50,000 +Value+s per request allowed.
-        # @!attribute [rw] headers
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::FieldId>]
-        # @!attribute [rw] rows
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::Table::Row>]
-        class Table
-          # @!attribute [rw] values
-          #   @return [Array<Google::Privacy::Dlp::V2beta1::Value>]
-          class Row; end
-        end
-
-        # All the findings for a single scanned item.
-        # @!attribute [rw] findings
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::Finding>]
-        #     List of findings for an item.
-        # @!attribute [rw] findings_truncated
-        #   @return [true, false]
-        #     If true, then this item might have more findings than were returned,
-        #     and the findings returned are an arbitrary subset of all findings.
-        #     The findings list might be truncated because the input items were too
-        #     large, or because the server reached the maximum amount of resources
-        #     allowed for a single API call. For best results, divide the input into
-        #     smaller batches.
-        class InspectResult; end
-
-        # Container structure describing a single finding within a string or image.
-        # @!attribute [rw] quote
-        #   @return [String]
-        #     The specific string that may be potentially sensitive info.
-        # @!attribute [rw] info_type
-        #   @return [Google::Privacy::Dlp::V2beta1::InfoType]
-        #     The specific type of info the string might be.
-        # @!attribute [rw] likelihood
-        #   @return [Google::Privacy::Dlp::V2beta1::Likelihood]
-        #     Estimate of how likely it is that the info_type is correct.
-        # @!attribute [rw] location
-        #   @return [Google::Privacy::Dlp::V2beta1::Location]
-        #     Location of the info found.
-        # @!attribute [rw] create_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Timestamp when finding was detected.
-        class Finding; end
-
-        # Specifies the location of a finding within its source item.
-        # @!attribute [rw] byte_range
-        #   @return [Google::Privacy::Dlp::V2beta1::Range]
-        #     Zero-based byte offsets within a content item.
-        # @!attribute [rw] codepoint_range
-        #   @return [Google::Privacy::Dlp::V2beta1::Range]
-        #     Character offsets within a content item, included when content type
-        #     is a text. Default charset assumed to be UTF-8.
-        # @!attribute [rw] image_boxes
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::ImageLocation>]
-        #     Location within an image's pixels.
-        # @!attribute [rw] record_key
-        #   @return [Google::Privacy::Dlp::V2beta1::RecordKey]
-        #     Key of the finding.
-        # @!attribute [rw] field_id
-        #   @return [Google::Privacy::Dlp::V2beta1::FieldId]
-        #     Field id of the field containing the finding.
-        # @!attribute [rw] table_location
-        #   @return [Google::Privacy::Dlp::V2beta1::TableLocation]
-        #     Location within a +ContentItem.Table+.
-        class Location; end
-
-        # Location of a finding within a +ContentItem.Table+.
-        # @!attribute [rw] row_index
-        #   @return [Integer]
-        #     The zero-based index of the row where the finding is located.
-        class TableLocation; end
-
-        # Generic half-open interval [start, end)
-        # @!attribute [rw] start
-        #   @return [Integer]
-        #     Index of the first character of the range (inclusive).
-        # @!attribute [rw] end
-        #   @return [Integer]
-        #     Index of the last character of the range (exclusive).
-        class Range; end
-
-        # Bounding box encompassing detected text within an image.
-        # @!attribute [rw] top
-        #   @return [Integer]
-        #     Top coordinate of the bounding box. (0,0) is upper left.
-        # @!attribute [rw] left
-        #   @return [Integer]
-        #     Left coordinate of the bounding box. (0,0) is upper left.
-        # @!attribute [rw] width
-        #   @return [Integer]
-        #     Width of the bounding box in pixels.
-        # @!attribute [rw] height
-        #   @return [Integer]
-        #     Height of the bounding box in pixels.
-        class ImageLocation; end
-
-        # Request to search for potentially sensitive info in a list of items
-        # and replace it with a default or provided content.
-        # @!attribute [rw] inspect_config
-        #   @return [Google::Privacy::Dlp::V2beta1::InspectConfig]
-        #     Configuration for the inspector.
-        # @!attribute [rw] items
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::ContentItem>]
-        #     The list of items to inspect. Up to 100 are allowed per request.
-        # @!attribute [rw] replace_configs
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::RedactContentRequest::ReplaceConfig>]
-        #     The strings to replace findings text findings with. Must specify at least
-        #     one of these or one ImageRedactionConfig if redacting images.
-        # @!attribute [rw] image_redaction_configs
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::RedactContentRequest::ImageRedactionConfig>]
-        #     The configuration for specifying what content to redact from images.
-        class RedactContentRequest
-          # @!attribute [rw] info_type
-          #   @return [Google::Privacy::Dlp::V2beta1::InfoType]
-          #     Type of information to replace. Only one ReplaceConfig per info_type
-          #     should be provided. If ReplaceConfig does not have an info_type, the DLP
-          #     API matches it against all info_types that are found but not specified in
-          #     another ReplaceConfig.
-          # @!attribute [rw] replace_with
-          #   @return [String]
-          #     Content replacing sensitive information of given type. Max 256 chars.
-          class ReplaceConfig; end
-
-          # Configuration for determining how redaction of images should occur.
-          # @!attribute [rw] info_type
-          #   @return [Google::Privacy::Dlp::V2beta1::InfoType]
-          #     Only one per info_type should be provided per request. If not
-          #     specified, and redact_all_text is false, the DLP API will redact all
-          #     text that it matches against all info_types that are found, but not
-          #     specified in another ImageRedactionConfig.
-          # @!attribute [rw] redact_all_text
-          #   @return [true, false]
-          #     If true, all text found in the image, regardless whether it matches an
-          #     info_type, is redacted.
-          # @!attribute [rw] redaction_color
-          #   @return [Google::Privacy::Dlp::V2beta1::Color]
-          #     The color to use when redacting content from an image. If not specified,
-          #     the default is black.
-          class ImageRedactionConfig; end
-        end
-
-        # Represents a color in the RGB color space.
-        # @!attribute [rw] red
-        #   @return [Float]
-        #     The amount of red in the color as a value in the interval [0, 1].
-        # @!attribute [rw] green
-        #   @return [Float]
-        #     The amount of green in the color as a value in the interval [0, 1].
-        # @!attribute [rw] blue
-        #   @return [Float]
-        #     The amount of blue in the color as a value in the interval [0, 1].
-        class Color; end
-
-        # Results of redacting a list of items.
-        # @!attribute [rw] items
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::ContentItem>]
-        #     The redacted content.
-        class RedactContentResponse; end
-
-        # Request to de-identify a list of items.
-        # @!attribute [rw] deidentify_config
-        #   @return [Google::Privacy::Dlp::V2beta1::DeidentifyConfig]
-        #     Configuration for the de-identification of the list of content items.
-        # @!attribute [rw] inspect_config
-        #   @return [Google::Privacy::Dlp::V2beta1::InspectConfig]
-        #     Configuration for the inspector.
-        # @!attribute [rw] items
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::ContentItem>]
-        #     The list of items to inspect. Up to 100 are allowed per request.
-        #     All items will be treated as text/*.
-        class DeidentifyContentRequest; end
-
-        # Results of de-identifying a list of items.
-        # @!attribute [rw] items
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::ContentItem>]
-        # @!attribute [rw] summaries
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::DeidentificationSummary>]
-        #     A review of the transformations that took place for each item.
-        class DeidentifyContentResponse; end
-
-        # Request to search for potentially sensitive info in a list of items.
-        # @!attribute [rw] inspect_config
-        #   @return [Google::Privacy::Dlp::V2beta1::InspectConfig]
-        #     Configuration for the inspector.
-        # @!attribute [rw] items
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::ContentItem>]
-        #     The list of items to inspect. Items in a single request are
-        #     considered "related" unless inspect_config.independent_inputs is true.
-        #     Up to 100 are allowed per request.
-        class InspectContentRequest; end
-
-        # Results of inspecting a list of items.
-        # @!attribute [rw] results
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::InspectResult>]
-        #     Each content_item from the request has a result in this list, in the
-        #     same order as the request.
-        class InspectContentResponse; end
-
-        # Request for scheduling a scan of a data subset from a Google Platform data
-        # repository.
-        # @!attribute [rw] inspect_config
-        #   @return [Google::Privacy::Dlp::V2beta1::InspectConfig]
-        #     Configuration for the inspector.
-        # @!attribute [rw] storage_config
-        #   @return [Google::Privacy::Dlp::V2beta1::StorageConfig]
-        #     Specification of the data set to process.
-        # @!attribute [rw] output_config
-        #   @return [Google::Privacy::Dlp::V2beta1::OutputStorageConfig]
-        #     Optional location to store findings.
-        # @!attribute [rw] operation_config
-        #   @return [Google::Privacy::Dlp::V2beta1::OperationConfig]
-        #     Additional configuration settings for long running operations.
-        class CreateInspectOperationRequest; end
-
-        # Cloud repository for storing output.
-        # @!attribute [rw] table
-        #   @return [Google::Privacy::Dlp::V2beta1::BigQueryTable]
-        #     Store findings in a new table in the dataset.
-        # @!attribute [rw] storage_path
-        #   @return [Google::Privacy::Dlp::V2beta1::CloudStoragePath]
-        #     The path to a Google Cloud Storage location to store output.
-        #     The bucket must already exist and
-        #     the Google APIs service account for DLP must have write permission to
-        #     write to the given bucket.
-        #     Results are split over multiple csv files with each file name matching
-        #     the pattern "[operation_id]_[count].csv", for example
-        #     +3094877188788974909_1.csv+. The +operation_id+ matches the
-        #     identifier for the Operation, and the +count+ is a counter used for
-        #     tracking the number of files written.
-        #
-        #     The CSV file(s) contain the following columns regardless of storage type
-        #     scanned:
-        #     * id
-        #     * info_type
-        #     * likelihood
-        #     * byte size of finding
-        #     * quote
-        #     * timestamp
-        #
-        #     For Cloud Storage the next columns are:
-        #
-        #     * file_path
-        #     * start_offset
-        #
-        #     For Cloud Datastore the next columns are:
-        #
-        #     * project_id
-        #     * namespace_id
-        #     * path
-        #     * column_name
-        #     * offset
-        #
-        #     For BigQuery the next columns are:
-        #
-        #     * row_number
-        #     * project_id
-        #     * dataset_id
-        #     * table_id
-        class OutputStorageConfig; end
-
-        # Statistics regarding a specific InfoType.
-        # @!attribute [rw] info_type
-        #   @return [Google::Privacy::Dlp::V2beta1::InfoType]
-        #     The type of finding this stat is for.
-        # @!attribute [rw] count
-        #   @return [Integer]
-        #     Number of findings for this info type.
-        class InfoTypeStatistics; end
-
-        # Metadata returned within GetOperation for an inspect request.
-        # @!attribute [rw] processed_bytes
-        #   @return [Integer]
-        #     Total size in bytes that were processed.
-        # @!attribute [rw] total_estimated_bytes
-        #   @return [Integer]
-        #     Estimate of the number of bytes to process.
-        # @!attribute [rw] info_type_stats
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::InfoTypeStatistics>]
-        # @!attribute [rw] create_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     The time which this request was started.
-        # @!attribute [rw] request_inspect_config
-        #   @return [Google::Privacy::Dlp::V2beta1::InspectConfig]
-        #     The inspect config used to create the Operation.
-        # @!attribute [rw] request_storage_config
-        #   @return [Google::Privacy::Dlp::V2beta1::StorageConfig]
-        #     The storage config used to create the Operation.
-        # @!attribute [rw] request_output_config
-        #   @return [Google::Privacy::Dlp::V2beta1::OutputStorageConfig]
-        #     Optional location to store findings.
-        class InspectOperationMetadata; end
-
-        # The operational data.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     The server-assigned name, which is only unique within the same service that
-        #     originally returns it. If you use the default HTTP mapping, the
-        #     +name+ should have the format of +inspect/results/{id}+.
-        class InspectOperationResult; end
-
-        # Request for the list of results in a given inspect operation.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Identifier of the results set returned as metadata of
-        #     the longrunning operation created by a call to InspectDataSource.
-        #     Should be in the format of +inspect/results/{id}+.
-        # @!attribute [rw] page_size
-        #   @return [Integer]
-        #     Maximum number of results to return.
-        #     If 0, the implementation selects a reasonable value.
-        # @!attribute [rw] page_token
-        #   @return [String]
-        #     The value returned by the last +ListInspectFindingsResponse+; indicates
-        #     that this is a continuation of a prior +ListInspectFindings+ call, and that
-        #     the system should return the next page of data.
-        # @!attribute [rw] filter
-        #   @return [String]
-        #     Restricts findings to items that match. Supports info_type and likelihood.
-        #
-        #     Examples:
-        #
-        #     * info_type=EMAIL_ADDRESS
-        #     * info_type=PHONE_NUMBER,EMAIL_ADDRESS
-        #     * likelihood=VERY_LIKELY
-        #     * likelihood=VERY_LIKELY,LIKELY
-        #     * info_type=EMAIL_ADDRESS,likelihood=VERY_LIKELY,LIKELY
-        class ListInspectFindingsRequest; end
-
-        # Response to the ListInspectFindings request.
-        # @!attribute [rw] result
-        #   @return [Google::Privacy::Dlp::V2beta1::InspectResult]
-        #     The results.
-        # @!attribute [rw] next_page_token
-        #   @return [String]
-        #     If not empty, indicates that there may be more results that match the
-        #     request; this value should be passed in a new +ListInspectFindingsRequest+.
-        class ListInspectFindingsResponse; end
-
-        # Description of the information type (infoType).
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Internal name of the infoType.
-        # @!attribute [rw] display_name
-        #   @return [String]
-        #     Human readable form of the infoType name.
-        # @!attribute [rw] categories
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::CategoryDescription>]
-        #     List of categories this infoType belongs to.
-        class InfoTypeDescription; end
-
-        # Request for the list of info types belonging to a given category,
-        # or all supported info types if no category is specified.
-        # @!attribute [rw] category
-        #   @return [String]
-        #     Category name as returned by ListRootCategories.
-        # @!attribute [rw] language_code
-        #   @return [String]
-        #     Optional BCP-47 language code for localized info type friendly
-        #     names. If omitted, or if localized strings are not available,
-        #     en-US strings will be returned.
-        class ListInfoTypesRequest; end
-
-        # Response to the ListInfoTypes request.
-        # @!attribute [rw] info_types
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::InfoTypeDescription>]
-        #     Set of sensitive info types belonging to a category.
-        class ListInfoTypesResponse; end
-
-        # Info Type Category description.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Internal name of the category.
-        # @!attribute [rw] display_name
-        #   @return [String]
-        #     Human readable form of the category name.
-        class CategoryDescription; end
-
-        # Request for root categories of Info Types supported by the API.
-        # Example values might include "FINANCE", "HEALTH", "FAST", "DEFAULT".
-        # @!attribute [rw] language_code
-        #   @return [String]
-        #     Optional language code for localized friendly category names.
-        #     If omitted or if localized strings are not available,
-        #     en-US strings will be returned.
-        class ListRootCategoriesRequest; end
-
-        # Response for ListRootCategories request.
-        # @!attribute [rw] categories
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::CategoryDescription>]
-        #     List of all into type categories supported by the API.
-        class ListRootCategoriesResponse; end
-
-        # Request for creating a risk analysis operation.
-        # @!attribute [rw] privacy_metric
-        #   @return [Google::Privacy::Dlp::V2beta1::PrivacyMetric]
-        #     Privacy metric to compute.
-        # @!attribute [rw] source_table
-        #   @return [Google::Privacy::Dlp::V2beta1::BigQueryTable]
-        #     Input dataset to compute metrics over.
-        class AnalyzeDataSourceRiskRequest; end
-
-        # Privacy metric to compute for reidentification risk analysis.
-        # @!attribute [rw] numerical_stats_config
-        #   @return [Google::Privacy::Dlp::V2beta1::PrivacyMetric::NumericalStatsConfig]
-        # @!attribute [rw] categorical_stats_config
-        #   @return [Google::Privacy::Dlp::V2beta1::PrivacyMetric::CategoricalStatsConfig]
-        # @!attribute [rw] k_anonymity_config
-        #   @return [Google::Privacy::Dlp::V2beta1::PrivacyMetric::KAnonymityConfig]
-        # @!attribute [rw] l_diversity_config
-        #   @return [Google::Privacy::Dlp::V2beta1::PrivacyMetric::LDiversityConfig]
-        class PrivacyMetric
-          # Compute numerical stats over an individual column, including
-          # min, max, and quantiles.
-          # @!attribute [rw] field
-          #   @return [Google::Privacy::Dlp::V2beta1::FieldId]
-          #     Field to compute numerical stats on. Supported types are
-          #     integer, float, date, datetime, timestamp, time.
-          class NumericalStatsConfig; end
-
-          # Compute numerical stats over an individual column, including
-          # number of distinct values and value count distribution.
-          # @!attribute [rw] field
-          #   @return [Google::Privacy::Dlp::V2beta1::FieldId]
-          #     Field to compute categorical stats on. All column types are
-          #     supported except for arrays and structs. However, it may be more
-          #     informative to use NumericalStats when the field type is supported,
-          #     depending on the data.
-          class CategoricalStatsConfig; end
-
-          # k-anonymity metric, used for analysis of reidentification risk.
-          # @!attribute [rw] quasi_ids
-          #   @return [Array<Google::Privacy::Dlp::V2beta1::FieldId>]
-          #     Set of fields to compute k-anonymity over. When multiple fields are
-          #     specified, they are considered a single composite key. Structs and
-          #     repeated data types are not supported; however, nested fields are
-          #     supported so long as they are not structs themselves or nested within
-          #     a repeated field.
-          # @!attribute [rw] entity_id
-          #   @return [Google::Privacy::Dlp::V2beta1::EntityId]
-          #     Optional message indicating that each distinct +EntityId+ should not
-          #     contribute to the k-anonymity count more than once per equivalence class.
-          class KAnonymityConfig; end
-
-          # l-diversity metric, used for analysis of reidentification risk.
-          # @!attribute [rw] quasi_ids
-          #   @return [Array<Google::Privacy::Dlp::V2beta1::FieldId>]
-          #     Set of quasi-identifiers indicating how equivalence classes are
-          #     defined for the l-diversity computation. When multiple fields are
-          #     specified, they are considered a single composite key.
-          # @!attribute [rw] sensitive_attribute
-          #   @return [Google::Privacy::Dlp::V2beta1::FieldId]
-          #     Sensitive field for computing the l-value.
-          class LDiversityConfig; end
-        end
-
-        # Metadata returned within the
-        # [+riskAnalysis.operations.get+](https://cloud.google.com/dlp/docs/reference/rest/v2beta1/riskAnalysis.operations/get)
-        # for risk analysis.
-        # @!attribute [rw] create_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     The time which this request was started.
-        # @!attribute [rw] requested_privacy_metric
-        #   @return [Google::Privacy::Dlp::V2beta1::PrivacyMetric]
-        #     Privacy metric to compute.
-        # @!attribute [rw] requested_source_table
-        #   @return [Google::Privacy::Dlp::V2beta1::BigQueryTable]
-        #     Input dataset to compute metrics over.
-        class RiskAnalysisOperationMetadata; end
-
-        # Result of a risk analysis
-        # [+Operation+](https://cloud.google.com/dlp/docs/reference/rest/v2beta1/inspect.operations)
-        # request.
-        # @!attribute [rw] numerical_stats_result
-        #   @return [Google::Privacy::Dlp::V2beta1::RiskAnalysisOperationResult::NumericalStatsResult]
-        # @!attribute [rw] categorical_stats_result
-        #   @return [Google::Privacy::Dlp::V2beta1::RiskAnalysisOperationResult::CategoricalStatsResult]
-        # @!attribute [rw] k_anonymity_result
-        #   @return [Google::Privacy::Dlp::V2beta1::RiskAnalysisOperationResult::KAnonymityResult]
-        # @!attribute [rw] l_diversity_result
-        #   @return [Google::Privacy::Dlp::V2beta1::RiskAnalysisOperationResult::LDiversityResult]
-        class RiskAnalysisOperationResult
-          # Result of the numerical stats computation.
-          # @!attribute [rw] min_value
-          #   @return [Google::Privacy::Dlp::V2beta1::Value]
-          #     Minimum value appearing in the column.
-          # @!attribute [rw] max_value
-          #   @return [Google::Privacy::Dlp::V2beta1::Value]
-          #     Maximum value appearing in the column.
-          # @!attribute [rw] quantile_values
-          #   @return [Array<Google::Privacy::Dlp::V2beta1::Value>]
-          #     List of 99 values that partition the set of field values into 100 equal
-          #     sized buckets.
-          class NumericalStatsResult; end
-
-          # Result of the categorical stats computation.
-          # @!attribute [rw] value_frequency_histogram_buckets
-          #   @return [Array<Google::Privacy::Dlp::V2beta1::RiskAnalysisOperationResult::CategoricalStatsResult::CategoricalStatsHistogramBucket>]
-          #     Histogram of value frequencies in the column.
-          class CategoricalStatsResult
-            # Histogram bucket of value frequencies in the column.
-            # @!attribute [rw] value_frequency_lower_bound
-            #   @return [Integer]
-            #     Lower bound on the value frequency of the values in this bucket.
-            # @!attribute [rw] value_frequency_upper_bound
-            #   @return [Integer]
-            #     Upper bound on the value frequency of the values in this bucket.
-            # @!attribute [rw] bucket_size
-            #   @return [Integer]
-            #     Total number of records in this bucket.
-            # @!attribute [rw] bucket_values
-            #   @return [Array<Google::Privacy::Dlp::V2beta1::ValueFrequency>]
-            #     Sample of value frequencies in this bucket. The total number of
-            #     values returned per bucket is capped at 20.
-            class CategoricalStatsHistogramBucket; end
-          end
-
-          # Result of the k-anonymity computation.
-          # @!attribute [rw] equivalence_class_histogram_buckets
-          #   @return [Array<Google::Privacy::Dlp::V2beta1::RiskAnalysisOperationResult::KAnonymityResult::KAnonymityHistogramBucket>]
-          #     Histogram of k-anonymity equivalence classes.
-          class KAnonymityResult
-            # The set of columns' values that share the same k-anonymity value.
-            # @!attribute [rw] quasi_ids_values
-            #   @return [Array<Google::Privacy::Dlp::V2beta1::Value>]
-            #     Set of values defining the equivalence class. One value per
-            #     quasi-identifier column in the original KAnonymity metric message.
-            #     The order is always the same as the original request.
-            # @!attribute [rw] equivalence_class_size
-            #   @return [Integer]
-            #     Size of the equivalence class, for example number of rows with the
-            #     above set of values.
-            class KAnonymityEquivalenceClass; end
-
-            # Histogram bucket of equivalence class sizes in the table.
-            # @!attribute [rw] equivalence_class_size_lower_bound
-            #   @return [Integer]
-            #     Lower bound on the size of the equivalence classes in this bucket.
-            # @!attribute [rw] equivalence_class_size_upper_bound
-            #   @return [Integer]
-            #     Upper bound on the size of the equivalence classes in this bucket.
-            # @!attribute [rw] bucket_size
-            #   @return [Integer]
-            #     Total number of records in this bucket.
-            # @!attribute [rw] bucket_values
-            #   @return [Array<Google::Privacy::Dlp::V2beta1::RiskAnalysisOperationResult::KAnonymityResult::KAnonymityEquivalenceClass>]
-            #     Sample of equivalence classes in this bucket. The total number of
-            #     classes returned per bucket is capped at 20.
-            class KAnonymityHistogramBucket; end
-          end
-
-          # Result of the l-diversity computation.
-          # @!attribute [rw] sensitive_value_frequency_histogram_buckets
-          #   @return [Array<Google::Privacy::Dlp::V2beta1::RiskAnalysisOperationResult::LDiversityResult::LDiversityHistogramBucket>]
-          #     Histogram of l-diversity equivalence class sensitive value frequencies.
-          class LDiversityResult
-            # The set of columns' values that share the same l-diversity value.
-            # @!attribute [rw] quasi_ids_values
-            #   @return [Array<Google::Privacy::Dlp::V2beta1::Value>]
-            #     Quasi-identifier values defining the k-anonymity equivalence
-            #     class. The order is always the same as the original request.
-            # @!attribute [rw] equivalence_class_size
-            #   @return [Integer]
-            #     Size of the k-anonymity equivalence class.
-            # @!attribute [rw] num_distinct_sensitive_values
-            #   @return [Integer]
-            #     Number of distinct sensitive values in this equivalence class.
-            # @!attribute [rw] top_sensitive_values
-            #   @return [Array<Google::Privacy::Dlp::V2beta1::ValueFrequency>]
-            #     Estimated frequencies of top sensitive values.
-            class LDiversityEquivalenceClass; end
-
-            # Histogram bucket of sensitive value frequencies in the table.
-            # @!attribute [rw] sensitive_value_frequency_lower_bound
-            #   @return [Integer]
-            #     Lower bound on the sensitive value frequencies of the equivalence
-            #     classes in this bucket.
-            # @!attribute [rw] sensitive_value_frequency_upper_bound
-            #   @return [Integer]
-            #     Upper bound on the sensitive value frequencies of the equivalence
-            #     classes in this bucket.
-            # @!attribute [rw] bucket_size
-            #   @return [Integer]
-            #     Total number of records in this bucket.
-            # @!attribute [rw] bucket_values
-            #   @return [Array<Google::Privacy::Dlp::V2beta1::RiskAnalysisOperationResult::LDiversityResult::LDiversityEquivalenceClass>]
-            #     Sample of equivalence classes in this bucket. The total number of
-            #     classes returned per bucket is capped at 20.
-            class LDiversityHistogramBucket; end
-          end
-        end
-
-        # A value of a field, including its frequency.
-        # @!attribute [rw] value
-        #   @return [Google::Privacy::Dlp::V2beta1::Value]
-        #     A value contained in the field in question.
-        # @!attribute [rw] count
-        #   @return [Integer]
-        #     How many times the value is contained in the field.
-        class ValueFrequency; end
-
-        # Set of primitive values supported by the system.
-        # @!attribute [rw] integer_value
-        #   @return [Integer]
-        # @!attribute [rw] float_value
-        #   @return [Float]
-        # @!attribute [rw] string_value
-        #   @return [String]
-        # @!attribute [rw] boolean_value
-        #   @return [true, false]
-        # @!attribute [rw] timestamp_value
-        #   @return [Google::Protobuf::Timestamp]
-        # @!attribute [rw] time_value
-        #   @return [Google::Type::TimeOfDay]
-        # @!attribute [rw] date_value
-        #   @return [Google::Type::Date]
-        class Value; end
-
-        # The configuration that controls how the data will change.
-        # @!attribute [rw] info_type_transformations
-        #   @return [Google::Privacy::Dlp::V2beta1::InfoTypeTransformations]
-        #     Treat the dataset as free-form text and apply the same free text
-        #     transformation everywhere.
-        # @!attribute [rw] record_transformations
-        #   @return [Google::Privacy::Dlp::V2beta1::RecordTransformations]
-        #     Treat the dataset as structured. Transformations can be applied to
-        #     specific locations within structured datasets, such as transforming
-        #     a column within a table.
-        class DeidentifyConfig; end
-
-        # A rule for transforming a value.
-        # @!attribute [rw] replace_config
-        #   @return [Google::Privacy::Dlp::V2beta1::ReplaceValueConfig]
-        # @!attribute [rw] redact_config
-        #   @return [Google::Privacy::Dlp::V2beta1::RedactConfig]
-        # @!attribute [rw] character_mask_config
-        #   @return [Google::Privacy::Dlp::V2beta1::CharacterMaskConfig]
-        # @!attribute [rw] crypto_replace_ffx_fpe_config
-        #   @return [Google::Privacy::Dlp::V2beta1::CryptoReplaceFfxFpeConfig]
-        # @!attribute [rw] fixed_size_bucketing_config
-        #   @return [Google::Privacy::Dlp::V2beta1::FixedSizeBucketingConfig]
-        # @!attribute [rw] bucketing_config
-        #   @return [Google::Privacy::Dlp::V2beta1::BucketingConfig]
-        # @!attribute [rw] replace_with_info_type_config
-        #   @return [Google::Privacy::Dlp::V2beta1::ReplaceWithInfoTypeConfig]
-        # @!attribute [rw] time_part_config
-        #   @return [Google::Privacy::Dlp::V2beta1::TimePartConfig]
-        # @!attribute [rw] crypto_hash_config
-        #   @return [Google::Privacy::Dlp::V2beta1::CryptoHashConfig]
-        class PrimitiveTransformation; end
-
-        # For use with +Date+, +Timestamp+, and +TimeOfDay+, extract or preserve a
-        # portion of the value.
-        # @!attribute [rw] part_to_extract
-        #   @return [Google::Privacy::Dlp::V2beta1::TimePartConfig::TimePart]
-        class TimePartConfig
-          module TimePart
-            TIME_PART_UNSPECIFIED = 0
-
-            # [000-9999]
-            YEAR = 1
-
-            # [1-12]
-            MONTH = 2
-
-            # [1-31]
-            DAY_OF_MONTH = 3
-
-            # [1-7]
-            DAY_OF_WEEK = 4
-
-            # [1-52]
-            WEEK_OF_YEAR = 5
-
-            # [0-24]
-            HOUR_OF_DAY = 6
-          end
-        end
-
-        # Pseudonymization method that generates surrogates via cryptographic hashing.
-        # Uses SHA-256.
-        # Outputs a 32 byte digest as an uppercase hex string
-        # (for example, 41D1567F7F99F1DC2A5FAB886DEE5BEE).
-        # Currently, only string and integer values can be hashed.
-        # @!attribute [rw] crypto_key
-        #   @return [Google::Privacy::Dlp::V2beta1::CryptoKey]
-        #     The key used by the hash function.
-        class CryptoHashConfig; end
-
-        # Replace each input value with a given +Value+.
-        # @!attribute [rw] new_value
-        #   @return [Google::Privacy::Dlp::V2beta1::Value]
-        #     Value to replace it with.
-        class ReplaceValueConfig; end
-
-        # Replace each matching finding with the name of the info_type.
-        class ReplaceWithInfoTypeConfig; end
-
-        # Redact a given value. For example, if used with an +InfoTypeTransformation+
-        # transforming PHONE_NUMBER, and input 'My phone number is 206-555-0123', the
-        # output would be 'My phone number is '.
-        class RedactConfig; end
-
-        # Characters to skip when doing deidentification of a value. These will be left
-        # alone and skipped.
-        # @!attribute [rw] characters_to_skip
-        #   @return [String]
-        # @!attribute [rw] common_characters_to_ignore
-        #   @return [Google::Privacy::Dlp::V2beta1::CharsToIgnore::CharacterGroup]
-        class CharsToIgnore
-          module CharacterGroup
-            CHARACTER_GROUP_UNSPECIFIED = 0
-
-            # 0-9
-            NUMERIC = 1
-
-            # A-Z
-            ALPHA_UPPER_CASE = 2
-
-            # a-z
-            ALPHA_LOWER_CASE = 3
-
-            # US Punctuation, one of !"#$%&'()*+,-./:;<=>?@[\]^_+{|}~
-            PUNCTUATION = 4
-
-            # Whitespace character, one of [ \t\n\x0B\f\r]
-            WHITESPACE = 5
-          end
-        end
-
-        # Partially mask a string by replacing a given number of characters with a
-        # fixed character. Masking can start from the beginning or end of the string.
-        # This can be used on data of any type (numbers, longs, and so on) and when
-        # de-identifying structured data we'll attempt to preserve the original data's
-        # type. (This allows you to take a long like 123 and modify it to a string like
-        # **3.
-        # @!attribute [rw] masking_character
-        #   @return [String]
-        #     Character to mask the sensitive values&mdash;for example, "*" for an
-        #     alphabetic string such as name, or "0" for a numeric string such as ZIP
-        #     code or credit card number. String must have length 1. If not supplied, we
-        #     will default to "*" for strings, 0 for digits.
-        # @!attribute [rw] number_to_mask
-        #   @return [Integer]
-        #     Number of characters to mask. If not set, all matching chars will be
-        #     masked. Skipped characters do not count towards this tally.
-        # @!attribute [rw] reverse_order
-        #   @return [true, false]
-        #     Mask characters in reverse order. For example, if +masking_character+ is
-        #     '0', number_to_mask is 14, and +reverse_order+ is false, then
-        #     1234-5678-9012-3456 -> 00000000000000-3456
-        #     If +masking_character+ is '*', +number_to_mask+ is 3, and +reverse_order+
-        #     is true, then 12345 -> 12***
-        # @!attribute [rw] characters_to_ignore
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::CharsToIgnore>]
-        #     When masking a string, items in this list will be skipped when replacing.
-        #     For example, if your string is 555-555-5555 and you ask us to skip +-+ and
-        #     mask 5 chars with * we would produce ***-*55-5555.
-        class CharacterMaskConfig; end
-
-        # Buckets values based on fixed size ranges. The
-        # Bucketing transformation can provide all of this functionality,
-        # but requires more configuration. This message is provided as a convenience to
-        # the user for simple bucketing strategies.
-        # The resulting value will be a hyphenated string of
-        # lower_bound-upper_bound.
-        # This can be used on data of type: double, long.
-        # If the bound Value type differs from the type of data
-        # being transformed, we will first attempt converting the type of the data to
-        # be transformed to match the type of the bound before comparing.
-        # @!attribute [rw] lower_bound
-        #   @return [Google::Privacy::Dlp::V2beta1::Value]
-        #     Lower bound value of buckets. All values less than +lower_bound+ are
-        #     grouped together into a single bucket; for example if +lower_bound+ = 10,
-        #     then all values less than 10 are replaced with the value “-10”. [Required].
-        # @!attribute [rw] upper_bound
-        #   @return [Google::Privacy::Dlp::V2beta1::Value]
-        #     Upper bound value of buckets. All values greater than upper_bound are
-        #     grouped together into a single bucket; for example if +upper_bound+ = 89,
-        #     then all values greater than 89 are replaced with the value “89+”.
-        #     [Required].
-        # @!attribute [rw] bucket_size
-        #   @return [Float]
-        #     Size of each bucket (except for minimum and maximum buckets). So if
-        #     +lower_bound+ = 10, +upper_bound+ = 89, and +bucket_size+ = 10, then the
-        #     following buckets would be used: -10, 10-20, 20-30, 30-40, 40-50, 50-60,
-        #     60-70, 70-80, 80-89, 89+. Precision up to 2 decimals works. [Required].
-        class FixedSizeBucketingConfig; end
-
-        # Generalization function that buckets values based on ranges. The ranges and
-        # replacement values are dynamically provided by the user for custom behavior,
-        # such as 1-30 -> LOW 31-65 -> MEDIUM 66-100 -> HIGH
-        # This can be used on
-        # data of type: number, long, string, timestamp.
-        # If the bound +Value+ type differs from the type of data being transformed, we
-        # will first attempt converting the type of the data to be transformed to match
-        # the type of the bound before comparing.
-        # @!attribute [rw] buckets
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::BucketingConfig::Bucket>]
-        class BucketingConfig
-          # Buckets represented as ranges, along with replacement values. Ranges must
-          # be non-overlapping.
-          # @!attribute [rw] min
-          #   @return [Google::Privacy::Dlp::V2beta1::Value]
-          #     Lower bound of the range, inclusive. Type should be the same as max if
-          #     used.
-          # @!attribute [rw] max
-          #   @return [Google::Privacy::Dlp::V2beta1::Value]
-          #     Upper bound of the range, exclusive; type must match min.
-          # @!attribute [rw] replacement_value
-          #   @return [Google::Privacy::Dlp::V2beta1::Value]
-          #     Replacement value for this bucket. If not provided
-          #     the default behavior will be to hyphenate the min-max range.
-          class Bucket; end
-        end
-
-        # Replaces an identifier with a surrogate using FPE with the FFX
-        # mode of operation.
-        # The identifier must be representable by the US-ASCII character set.
-        # For a given crypto key and context, the same identifier will be
-        # replaced with the same surrogate.
-        # Identifiers must be at least two characters long.
-        # In the case that the identifier is the empty string, it will be skipped.
-        # @!attribute [rw] crypto_key
-        #   @return [Google::Privacy::Dlp::V2beta1::CryptoKey]
-        #     The key used by the encryption algorithm. [required]
-        # @!attribute [rw] context
-        #   @return [Google::Privacy::Dlp::V2beta1::FieldId]
-        #     A context may be used for higher security since the same
-        #     identifier in two different contexts likely will be given a distinct
-        #     surrogate. The principle is that the likeliness is inversely related
-        #     to the ratio of the number of distinct identifiers per context over the
-        #     number of possible surrogates: As long as this ratio is small, the
-        #     likehood is large.
-        #
-        #     If the context is not set, a default tweak will be used.
-        #     If the context is set but:
-        #
-        #     1. there is no record present when transforming a given value or
-        #     1. the field is not present when transforming a given value,
-        #
-        #     a default tweak will be used.
-        #
-        #     Note that case (1) is expected when an +InfoTypeTransformation+ is
-        #     applied to both structured and non-structured +ContentItem+s.
-        #     Currently, the referenced field may be of value type integer or string.
-        #
-        #     The tweak is constructed as a sequence of bytes in big endian byte order
-        #     such that:
-        #
-        #     * a 64 bit integer is encoded followed by a single byte of value 1
-        #     * a string is encoded in UTF-8 format followed by a single byte of value 2
-        #
-        #     This is also known as the 'tweak', as in tweakable encryption.
-        # @!attribute [rw] common_alphabet
-        #   @return [Google::Privacy::Dlp::V2beta1::CryptoReplaceFfxFpeConfig::FfxCommonNativeAlphabet]
-        # @!attribute [rw] custom_alphabet
-        #   @return [String]
-        #     This is supported by mapping these to the alphanumeric characters
-        #     that the FFX mode natively supports. This happens before/after
-        #     encryption/decryption.
-        #     Each character listed must appear only once.
-        #     Number of characters must be in the range [2, 62].
-        #     This must be encoded as ASCII.
-        #     The order of characters does not matter.
-        # @!attribute [rw] radix
-        #   @return [Integer]
-        #     The native way to select the alphabet. Must be in the range [2, 62].
-        class CryptoReplaceFfxFpeConfig
-          # These are commonly used subsets of the alphabet that the FFX mode
-          # natively supports. In the algorithm, the alphabet is selected using
-          # the "radix". Therefore each corresponds to particular radix.
-          module FfxCommonNativeAlphabet
-            FFX_COMMON_NATIVE_ALPHABET_UNSPECIFIED = 0
-
-            # [0-9] (radix of 10)
-            NUMERIC = 1
-
-            # [0-9A-F] (radix of 16)
-            HEXADECIMAL = 2
-
-            # [0-9A-Z] (radix of 36)
-            UPPER_CASE_ALPHA_NUMERIC = 3
-
-            # [0-9A-Za-z] (radix of 62)
-            ALPHA_NUMERIC = 4
-          end
-        end
-
-        # This is a data encryption key (DEK) (as opposed to
-        # a key encryption key (KEK) stored by KMS).
-        # When using KMS to wrap/unwrap DEKs, be sure to set an appropriate
-        # IAM policy on the KMS CryptoKey (KEK) to ensure an attacker cannot
-        # unwrap the data crypto key.
-        # @!attribute [rw] transient
-        #   @return [Google::Privacy::Dlp::V2beta1::TransientCryptoKey]
-        # @!attribute [rw] unwrapped
-        #   @return [Google::Privacy::Dlp::V2beta1::UnwrappedCryptoKey]
-        # @!attribute [rw] kms_wrapped
-        #   @return [Google::Privacy::Dlp::V2beta1::KmsWrappedCryptoKey]
-        class CryptoKey; end
-
-        # Use this to have a random data crypto key generated.
-        # It will be discarded after the operation/request finishes.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Name of the key. [required]
-        #     This is an arbitrary string used to differentiate different keys.
-        #     A unique key is generated per name: two separate +TransientCryptoKey+
-        #     protos share the same generated key if their names are the same.
-        #     When the data crypto key is generated, this name is not used in any way
-        #     (repeating the api call will result in a different key being generated).
-        class TransientCryptoKey; end
-
-        # Using raw keys is prone to security risks due to accidentally
-        # leaking the key. Choose another type of key if possible.
-        # @!attribute [rw] key
-        #   @return [String]
-        #     The AES 128/192/256 bit key. [required]
-        class UnwrappedCryptoKey; end
-
-        # Include to use an existing data crypto key wrapped by KMS.
-        # Authorization requires the following IAM permissions when sending a request
-        # to perform a crypto transformation using a kms-wrapped crypto key:
-        # dlp.kms.encrypt
-        # @!attribute [rw] wrapped_key
-        #   @return [String]
-        #     The wrapped data crypto key. [required]
-        # @!attribute [rw] crypto_key_name
-        #   @return [String]
-        #     The resource name of the KMS CryptoKey to use for unwrapping. [required]
-        class KmsWrappedCryptoKey; end
-
-        # A type of transformation that will scan unstructured text and
-        # apply various +PrimitiveTransformation+s to each finding, where the
-        # transformation is applied to only values that were identified as a specific
-        # info_type.
-        # @!attribute [rw] transformations
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::InfoTypeTransformations::InfoTypeTransformation>]
-        #     Transformation for each info type. Cannot specify more than one
-        #     for a given info type. [required]
-        class InfoTypeTransformations
-          # A transformation to apply to text that is identified as a specific
-          # info_type.
-          # @!attribute [rw] info_types
-          #   @return [Array<Google::Privacy::Dlp::V2beta1::InfoType>]
-          #     Info types to apply the transformation to. Empty list will match all
-          #     available info types for this transformation.
-          # @!attribute [rw] primitive_transformation
-          #   @return [Google::Privacy::Dlp::V2beta1::PrimitiveTransformation]
-          #     Primitive transformation to apply to the info type. [required]
-          class InfoTypeTransformation; end
-        end
-
-        # The transformation to apply to the field.
-        # @!attribute [rw] fields
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::FieldId>]
-        #     Input field(s) to apply the transformation to. [required]
-        # @!attribute [rw] condition
-        #   @return [Google::Privacy::Dlp::V2beta1::RecordCondition]
-        #     Only apply the transformation if the condition evaluates to true for the
-        #     given +RecordCondition+. The conditions are allowed to reference fields
-        #     that are not used in the actual transformation. [optional]
-        #
-        #     Example Use Cases:
-        #
-        #     * Apply a different bucket transformation to an age column if the zip code
-        #       column for the same record is within a specific range.
-        #     * Redact a field if the date of birth field is greater than 85.
-        # @!attribute [rw] primitive_transformation
-        #   @return [Google::Privacy::Dlp::V2beta1::PrimitiveTransformation]
-        #     Apply the transformation to the entire field.
-        # @!attribute [rw] info_type_transformations
-        #   @return [Google::Privacy::Dlp::V2beta1::InfoTypeTransformations]
-        #     Treat the contents of the field as free text, and selectively
-        #     transform content that matches an +InfoType+.
-        class FieldTransformation; end
-
-        # A type of transformation that is applied over structured data such as a
-        # table.
-        # @!attribute [rw] field_transformations
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::FieldTransformation>]
-        #     Transform the record by applying various field transformations.
-        # @!attribute [rw] record_suppressions
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::RecordSuppression>]
-        #     Configuration defining which records get suppressed entirely. Records that
-        #     match any suppression rule are omitted from the output [optional].
-        class RecordTransformations; end
-
-        # Configuration to suppress records whose suppression conditions evaluate to
-        # true.
-        # @!attribute [rw] condition
-        #   @return [Google::Privacy::Dlp::V2beta1::RecordCondition]
-        class RecordSuppression; end
-
-        # A condition for determining whether a transformation should be applied to
-        # a field.
-        # @!attribute [rw] expressions
-        #   @return [Google::Privacy::Dlp::V2beta1::RecordCondition::Expressions]
-        class RecordCondition
-          # The field type of +value+ and +field+ do not need to match to be
-          # considered equal, but not all comparisons are possible.
-          #
-          # A +value+ of type:
-          #
-          # * +string+ can be compared against all other types
-          # * +boolean+ can only be compared against other booleans
-          # * +integer+ can be compared against doubles or a string if the string value
-          #   can be parsed as an integer.
-          # * +double+ can be compared against integers or a string if the string can
-          #   be parsed as a double.
-          # * +Timestamp+ can be compared against strings in RFC 3339 date string
-          #   format.
-          # * +TimeOfDay+ can be compared against timestamps and strings in the format
-          #   of 'HH:mm:ss'.
-          #
-          # If we fail to compare do to type mismatch, a warning will be given and
-          # the condition will evaluate to false.
-          # @!attribute [rw] field
-          #   @return [Google::Privacy::Dlp::V2beta1::FieldId]
-          #     Field within the record this condition is evaluated against. [required]
-          # @!attribute [rw] operator
-          #   @return [Google::Privacy::Dlp::V2beta1::RelationalOperator]
-          #     Operator used to compare the field or info type to the value. [required]
-          # @!attribute [rw] value
-          #   @return [Google::Privacy::Dlp::V2beta1::Value]
-          #     Value to compare against. [Required, except for +EXISTS+ tests.]
-          class Condition; end
-
-          # @!attribute [rw] conditions
-          #   @return [Array<Google::Privacy::Dlp::V2beta1::RecordCondition::Condition>]
-          class Conditions; end
-
-          # A collection of expressions
-          # @!attribute [rw] logical_operator
-          #   @return [Google::Privacy::Dlp::V2beta1::RecordCondition::Expressions::LogicalOperator]
-          #     The operator to apply to the result of conditions. Default and currently
-          #     only supported value is +AND+.
-          # @!attribute [rw] conditions
-          #   @return [Google::Privacy::Dlp::V2beta1::RecordCondition::Conditions]
-          class Expressions
-            module LogicalOperator
-              LOGICAL_OPERATOR_UNSPECIFIED = 0
-
-              AND = 1
-            end
-          end
-        end
-
-        # High level summary of deidentification.
-        # @!attribute [rw] transformed_bytes
-        #   @return [Integer]
-        #     Total size in bytes that were transformed in some way.
-        # @!attribute [rw] transformation_summaries
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::TransformationSummary>]
-        #     Transformations applied to the dataset.
-        class DeidentificationSummary; end
-
-        # Summary of a single tranformation.
-        # @!attribute [rw] info_type
-        #   @return [Google::Privacy::Dlp::V2beta1::InfoType]
-        #     Set if the transformation was limited to a specific info_type.
-        # @!attribute [rw] field
-        #   @return [Google::Privacy::Dlp::V2beta1::FieldId]
-        #     Set if the transformation was limited to a specific FieldId.
-        # @!attribute [rw] transformation
-        #   @return [Google::Privacy::Dlp::V2beta1::PrimitiveTransformation]
-        #     The specific transformation these stats apply to.
-        # @!attribute [rw] field_transformations
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::FieldTransformation>]
-        #     The field transformation that was applied. This list will contain
-        #     multiple only in the case of errors.
-        # @!attribute [rw] record_suppress
-        #   @return [Google::Privacy::Dlp::V2beta1::RecordSuppression]
-        #     The specific suppression option these stats apply to.
-        # @!attribute [rw] results
-        #   @return [Array<Google::Privacy::Dlp::V2beta1::TransformationSummary::SummaryResult>]
-        class TransformationSummary
-          # A collection that informs the user the number of times a particular
-          # +TransformationResultCode+ and error details occurred.
-          # @!attribute [rw] count
-          #   @return [Integer]
-          # @!attribute [rw] code
-          #   @return [Google::Privacy::Dlp::V2beta1::TransformationSummary::TransformationResultCode]
-          # @!attribute [rw] details
-          #   @return [String]
-          #     A place for warnings or errors to show up if a transformation didn't
-          #     work as expected.
-          class SummaryResult; end
-
-          # Possible outcomes of transformations.
-          module TransformationResultCode
-            TRANSFORMATION_RESULT_CODE_UNSPECIFIED = 0
-
-            SUCCESS = 1
-
-            ERROR = 2
-          end
-        end
-
-        # Categorization of results based on how likely they are to represent a match,
-        # based on the number of elements they contain which imply a match.
-        module Likelihood
-          # Default value; information with all likelihoods is included.
-          LIKELIHOOD_UNSPECIFIED = 0
-
-          # Few matching elements.
-          VERY_UNLIKELY = 1
-
-          UNLIKELY = 2
-
-          # Some matching elements.
-          POSSIBLE = 3
-
-          LIKELY = 4
-
-          # Many matching elements.
-          VERY_LIKELY = 5
-        end
-
-        # Operators available for comparing the value of fields.
-        module RelationalOperator
-          RELATIONAL_OPERATOR_UNSPECIFIED = 0
-
-          # Equal.
-          EQUAL_TO = 1
-
-          # Not equal to.
-          NOT_EQUAL_TO = 2
-
-          # Greater than.
-          GREATER_THAN = 3
-
-          # Less than.
-          LESS_THAN = 4
-
-          # Greater than or equals.
-          GREATER_THAN_OR_EQUALS = 5
-
-          # Less than or equals.
-          LESS_THAN_OR_EQUALS = 6
-
-          # Exists
-          EXISTS = 7
-        end
-      end
-    end
-  end
-end