google-cloud-dlp 0.14.0 → 1.1.2

data/lib/google/cloud/dlp/v2/dlp_service_client_config.json

@@ -1,176 +0,0 @@
-{
-  "interfaces": {
-    "google.privacy.dlp.v2.DlpService": {
-      "retry_codes": {
-        "idempotent": [
-          "DEADLINE_EXCEEDED",
-          "UNAVAILABLE"
-        ],
-        "non_idempotent": []
-      },
-      "retry_params": {
-        "default": {
-          "initial_retry_delay_millis": 100,
-          "retry_delay_multiplier": 1.3,
-          "max_retry_delay_millis": 60000,
-          "initial_rpc_timeout_millis": 20000,
-          "rpc_timeout_multiplier": 1.0,
-          "max_rpc_timeout_millis": 20000,
-          "total_timeout_millis": 600000
-        }
-      },
-      "methods": {
-        "InspectContent": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "RedactImage": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "DeidentifyContent": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "ReidentifyContent": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "ListInfoTypes": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "CreateInspectTemplate": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "UpdateInspectTemplate": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "GetInspectTemplate": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "ListInspectTemplates": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "DeleteInspectTemplate": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "CreateDeidentifyTemplate": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "UpdateDeidentifyTemplate": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "GetDeidentifyTemplate": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "ListDeidentifyTemplates": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "DeleteDeidentifyTemplate": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "CreateDlpJob": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "ListDlpJobs": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "GetDlpJob": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "DeleteDlpJob": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "CancelDlpJob": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "ListJobTriggers": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "GetJobTrigger": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "DeleteJobTrigger": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "UpdateJobTrigger": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "CreateJobTrigger": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "CreateStoredInfoType": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "UpdateStoredInfoType": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "GetStoredInfoType": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "ListStoredInfoTypes": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "DeleteStoredInfoType": {
-          "timeout_millis": 300000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        }
-      }
-    }
-  }
-}

data/lib/google/cloud/dlp/v2/doc/google/privacy/dlp/v2/dlp.rb

@@ -1,2925 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Privacy
-    module Dlp
-      module V2
-        # List of exclude infoTypes.
-        # @!attribute [rw] info_types
-        #   @return [Array<Google::Privacy::Dlp::V2::InfoType>]
-        #     InfoType list in ExclusionRule rule drops a finding when it overlaps or
-        #     contained within with a finding of an infoType from this list. For
-        #     example, for `InspectionRuleSet.info_types` containing "PHONE_NUMBER"` and
-        #     `exclusion_rule` containing `exclude_info_types.info_types` with
-        #     "EMAIL_ADDRESS" the phone number findings are dropped if they overlap
-        #     with EMAIL_ADDRESS finding.
-        #     That leads to "555-222-2222@example.org" to generate only a single
-        #     finding, namely email address.
-        class ExcludeInfoTypes; end
-
-        # The rule that specifies conditions when findings of infoTypes specified in
-        # `InspectionRuleSet` are removed from results.
-        # @!attribute [rw] dictionary
-        #   @return [Google::Privacy::Dlp::V2::CustomInfoType::Dictionary]
-        #     Dictionary which defines the rule.
-        # @!attribute [rw] regex
-        #   @return [Google::Privacy::Dlp::V2::CustomInfoType::Regex]
-        #     Regular expression which defines the rule.
-        # @!attribute [rw] exclude_info_types
-        #   @return [Google::Privacy::Dlp::V2::ExcludeInfoTypes]
-        #     Set of infoTypes for which findings would affect this rule.
-        # @!attribute [rw] matching_type
-        #   @return [Google::Privacy::Dlp::V2::MatchingType]
-        #     How the rule is applied, see MatchingType documentation for details.
-        class ExclusionRule; end
-
-        # A single inspection rule to be applied to infoTypes, specified in
-        # `InspectionRuleSet`.
-        # @!attribute [rw] hotword_rule
-        #   @return [Google::Privacy::Dlp::V2::CustomInfoType::DetectionRule::HotwordRule]
-        #     Hotword-based detection rule.
-        # @!attribute [rw] exclusion_rule
-        #   @return [Google::Privacy::Dlp::V2::ExclusionRule]
-        #     Exclusion rule.
-        class InspectionRule; end
-
-        # Rule set for modifying a set of infoTypes to alter behavior under certain
-        # circumstances, depending on the specific details of the rules within the set.
-        # @!attribute [rw] info_types
-        #   @return [Array<Google::Privacy::Dlp::V2::InfoType>]
-        #     List of infoTypes this rule set is applied to.
-        # @!attribute [rw] rules
-        #   @return [Array<Google::Privacy::Dlp::V2::InspectionRule>]
-        #     Set of rules to be applied to infoTypes. The rules are applied in order.
-        class InspectionRuleSet; end
-
-        # Configuration description of the scanning process.
-        # When used with redactContent only info_types and min_likelihood are currently
-        # used.
-        # @!attribute [rw] info_types
-        #   @return [Array<Google::Privacy::Dlp::V2::InfoType>]
-        #     Restricts what info_types to look for. The values must correspond to
-        #     InfoType values returned by ListInfoTypes or listed at
-        #     https://cloud.google.com/dlp/docs/infotypes-reference.
-        #
-        #     When no InfoTypes or CustomInfoTypes are specified in a request, the
-        #     system may automatically choose what detectors to run. By default this may
-        #     be all types, but may change over time as detectors are updated.
-        #
-        #     If you need precise control and predictability as to what detectors are
-        #     run you should specify specific InfoTypes listed in the reference,
-        #     otherwise a default list will be used, which may change over time.
-        # @!attribute [rw] min_likelihood
-        #   @return [Google::Privacy::Dlp::V2::Likelihood]
-        #     Only returns findings equal or above this threshold. The default is
-        #     POSSIBLE.
-        #     See https://cloud.google.com/dlp/docs/likelihood to learn more.
-        # @!attribute [rw] limits
-        #   @return [Google::Privacy::Dlp::V2::InspectConfig::FindingLimits]
-        #     Configuration to control the number of findings returned.
-        # @!attribute [rw] include_quote
-        #   @return [true, false]
-        #     When true, a contextual quote from the data that triggered a finding is
-        #     included in the response; see Finding.quote.
-        # @!attribute [rw] exclude_info_types
-        #   @return [true, false]
-        #     When true, excludes type information of the findings.
-        # @!attribute [rw] custom_info_types
-        #   @return [Array<Google::Privacy::Dlp::V2::CustomInfoType>]
-        #     CustomInfoTypes provided by the user. See
-        #     https://cloud.google.com/dlp/docs/creating-custom-infotypes to learn more.
-        # @!attribute [rw] content_options
-        #   @return [Array<Google::Privacy::Dlp::V2::ContentOption>]
-        #     List of options defining data content to scan.
-        #     If empty, text, images, and other content will be included.
-        # @!attribute [rw] rule_set
-        #   @return [Array<Google::Privacy::Dlp::V2::InspectionRuleSet>]
-        #     Set of rules to apply to the findings for this InspectConfig.
-        #     Exclusion rules, contained in the set are executed in the end, other
-        #     rules are executed in the order they are specified for each info type.
-        class InspectConfig
-          # Configuration to control the number of findings returned.
-          # @!attribute [rw] max_findings_per_item
-          #   @return [Integer]
-          #     Max number of findings that will be returned for each item scanned.
-          #     When set within `InspectDataSourceRequest`,
-          #     the maximum returned is 2000 regardless if this is set higher.
-          #     When set within `InspectContentRequest`, this field is ignored.
-          # @!attribute [rw] max_findings_per_request
-          #   @return [Integer]
-          #     Max number of findings that will be returned per request/job.
-          #     When set within `InspectContentRequest`, the maximum returned is 2000
-          #     regardless if this is set higher.
-          # @!attribute [rw] max_findings_per_info_type
-          #   @return [Array<Google::Privacy::Dlp::V2::InspectConfig::FindingLimits::InfoTypeLimit>]
-          #     Configuration of findings limit given for specified infoTypes.
-          class FindingLimits
-            # Max findings configuration per infoType, per content item or long
-            # running DlpJob.
-            # @!attribute [rw] info_type
-            #   @return [Google::Privacy::Dlp::V2::InfoType]
-            #     Type of information the findings limit applies to. Only one limit per
-            #     info_type should be provided. If InfoTypeLimit does not have an
-            #     info_type, the DLP API applies the limit against all info_types that
-            #     are found but not specified in another InfoTypeLimit.
-            # @!attribute [rw] max_findings
-            #   @return [Integer]
-            #     Max findings limit for the given infoType.
-            class InfoTypeLimit; end
-          end
-        end
-
-        # Container for bytes to inspect or redact.
-        # @!attribute [rw] type
-        #   @return [Google::Privacy::Dlp::V2::ByteContentItem::BytesType]
-        #     The type of data stored in the bytes string. Default will be TEXT_UTF8.
-        # @!attribute [rw] data
-        #   @return [String]
-        #     Content data to inspect or redact.
-        class ByteContentItem
-          # The type of data being sent to in data.
-          module BytesType
-            # Unused
-            BYTES_TYPE_UNSPECIFIED = 0
-
-            # Any image type.
-            IMAGE = 6
-
-            # jpeg
-            IMAGE_JPEG = 1
-
-            # bmp
-            IMAGE_BMP = 2
-
-            # png
-            IMAGE_PNG = 3
-
-            # svg
-            IMAGE_SVG = 4
-
-            # plain text
-            TEXT_UTF8 = 5
-
-            # avro
-            AVRO = 11
-          end
-        end
-
-        # Container structure for the content to inspect.
-        # @!attribute [rw] value
-        #   @return [String]
-        #     String data to inspect or redact.
-        # @!attribute [rw] table
-        #   @return [Google::Privacy::Dlp::V2::Table]
-        #     Structured content for inspection. See
-        #     https://cloud.google.com/dlp/docs/inspecting-text#inspecting_a_table to
-        #     learn more.
-        # @!attribute [rw] byte_item
-        #   @return [Google::Privacy::Dlp::V2::ByteContentItem]
-        #     Content data to inspect or redact. Replaces `type` and `data`.
-        class ContentItem; end
-
-        # Structured content to inspect. Up to 50,000 `Value`s per request allowed.
-        # See https://cloud.google.com/dlp/docs/inspecting-text#inspecting_a_table to
-        # learn more.
-        # @!attribute [rw] headers
-        #   @return [Array<Google::Privacy::Dlp::V2::FieldId>]
-        #     Headers of the table.
-        # @!attribute [rw] rows
-        #   @return [Array<Google::Privacy::Dlp::V2::Table::Row>]
-        #     Rows of the table.
-        class Table
-          # Values of the row.
-          # @!attribute [rw] values
-          #   @return [Array<Google::Privacy::Dlp::V2::Value>]
-          #     Individual cells.
-          class Row; end
-        end
-
-        # All the findings for a single scanned item.
-        # @!attribute [rw] findings
-        #   @return [Array<Google::Privacy::Dlp::V2::Finding>]
-        #     List of findings for an item.
-        # @!attribute [rw] findings_truncated
-        #   @return [true, false]
-        #     If true, then this item might have more findings than were returned,
-        #     and the findings returned are an arbitrary subset of all findings.
-        #     The findings list might be truncated because the input items were too
-        #     large, or because the server reached the maximum amount of resources
-        #     allowed for a single API call. For best results, divide the input into
-        #     smaller batches.
-        class InspectResult; end
-
-        # Represents a piece of potentially sensitive content.
-        # @!attribute [rw] quote
-        #   @return [String]
-        #     The content that was found. Even if the content is not textual, it
-        #     may be converted to a textual representation here.
-        #     Provided if `include_quote` is true and the finding is
-        #     less than or equal to 4096 bytes long. If the finding exceeds 4096 bytes
-        #     in length, the quote may be omitted.
-        # @!attribute [rw] info_type
-        #   @return [Google::Privacy::Dlp::V2::InfoType]
-        #     The type of content that might have been found.
-        #     Provided if `excluded_types` is false.
-        # @!attribute [rw] likelihood
-        #   @return [Google::Privacy::Dlp::V2::Likelihood]
-        #     Confidence of how likely it is that the `info_type` is correct.
-        # @!attribute [rw] location
-        #   @return [Google::Privacy::Dlp::V2::Location]
-        #     Where the content was found.
-        # @!attribute [rw] create_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Timestamp when finding was detected.
-        # @!attribute [rw] quote_info
-        #   @return [Google::Privacy::Dlp::V2::QuoteInfo]
-        #     Contains data parsed from quotes. Only populated if include_quote was set
-        #     to true and a supported infoType was requested. Currently supported
-        #     infoTypes: DATE, DATE_OF_BIRTH and TIME.
-        class Finding; end
-
-        # Specifies the location of the finding.
-        # @!attribute [rw] byte_range
-        #   @return [Google::Privacy::Dlp::V2::Range]
-        #     Zero-based byte offsets delimiting the finding.
-        #     These are relative to the finding's containing element.
-        #     Note that when the content is not textual, this references
-        #     the UTF-8 encoded textual representation of the content.
-        #     Omitted if content is an image.
-        # @!attribute [rw] codepoint_range
-        #   @return [Google::Privacy::Dlp::V2::Range]
-        #     Unicode character offsets delimiting the finding.
-        #     These are relative to the finding's containing element.
-        #     Provided when the content is text.
-        # @!attribute [rw] content_locations
-        #   @return [Array<Google::Privacy::Dlp::V2::ContentLocation>]
-        #     List of nested objects pointing to the precise location of the finding
-        #     within the file or record.
-        class Location; end
-
-        # Findings container location data.
-        # @!attribute [rw] container_name
-        #   @return [String]
-        #     Name of the container where the finding is located.
-        #     The top level name is the source file name or table name. Names of some
-        #     common storage containers are formatted as follows:
-        #
-        #     * BigQuery tables:  `{project_id}:{dataset_id}.{table_id}`
-        #     * Cloud Storage files: `gs://{bucket}/{path}`
-        #     * Datastore namespace: \\{namespace}
-        #
-        #     Nested names could be absent if the embedded object has no string
-        #     identifier (for an example an image contained within a document).
-        # @!attribute [rw] record_location
-        #   @return [Google::Privacy::Dlp::V2::RecordLocation]
-        #     Location within a row or record of a database table.
-        # @!attribute [rw] image_location
-        #   @return [Google::Privacy::Dlp::V2::ImageLocation]
-        #     Location within an image's pixels.
-        # @!attribute [rw] document_location
-        #   @return [Google::Privacy::Dlp::V2::DocumentLocation]
-        #     Location data for document files.
-        # @!attribute [rw] container_timestamp
-        #   @return [Google::Protobuf::Timestamp]
-        #     Findings container modification timestamp, if applicable.
-        #     For Google Cloud Storage contains last file modification timestamp.
-        #     For BigQuery table contains last_modified_time property.
-        #     For Datastore - not populated.
-        # @!attribute [rw] container_version
-        #   @return [String]
-        #     Findings container version, if available
-        #     ("generation" for Google Cloud Storage).
-        class ContentLocation; end
-
-        # Location of a finding within a document.
-        # @!attribute [rw] file_offset
-        #   @return [Integer]
-        #     Offset of the line, from the beginning of the file, where the finding
-        #     is located.
-        class DocumentLocation; end
-
-        # Location of a finding within a row or record.
-        # @!attribute [rw] record_key
-        #   @return [Google::Privacy::Dlp::V2::RecordKey]
-        #     Key of the finding.
-        # @!attribute [rw] field_id
-        #   @return [Google::Privacy::Dlp::V2::FieldId]
-        #     Field id of the field containing the finding.
-        # @!attribute [rw] table_location
-        #   @return [Google::Privacy::Dlp::V2::TableLocation]
-        #     Location within a `ContentItem.Table`.
-        class RecordLocation; end
-
-        # Location of a finding within a table.
-        # @!attribute [rw] row_index
-        #   @return [Integer]
-        #     The zero-based index of the row where the finding is located.
-        class TableLocation; end
-
-        # Generic half-open interval [start, end)
-        # @!attribute [rw] start
-        #   @return [Integer]
-        #     Index of the first character of the range (inclusive).
-        # @!attribute [rw] end
-        #   @return [Integer]
-        #     Index of the last character of the range (exclusive).
-        class Range; end
-
-        # Location of the finding within an image.
-        # @!attribute [rw] bounding_boxes
-        #   @return [Array<Google::Privacy::Dlp::V2::BoundingBox>]
-        #     Bounding boxes locating the pixels within the image containing the finding.
-        class ImageLocation; end
-
-        # Bounding box encompassing detected text within an image.
-        # @!attribute [rw] top
-        #   @return [Integer]
-        #     Top coordinate of the bounding box. (0,0) is upper left.
-        # @!attribute [rw] left
-        #   @return [Integer]
-        #     Left coordinate of the bounding box. (0,0) is upper left.
-        # @!attribute [rw] width
-        #   @return [Integer]
-        #     Width of the bounding box in pixels.
-        # @!attribute [rw] height
-        #   @return [Integer]
-        #     Height of the bounding box in pixels.
-        class BoundingBox; end
-
-        # Request to search for potentially sensitive info in an image and redact it
-        # by covering it with a colored rectangle.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     The parent resource name, for example projects/my-project-id.
-        # @!attribute [rw] location_id
-        #   @return [String]
-        #     The geographic location to process the request. Reserved for future
-        #     extensions.
-        # @!attribute [rw] inspect_config
-        #   @return [Google::Privacy::Dlp::V2::InspectConfig]
-        #     Configuration for the inspector.
-        # @!attribute [rw] image_redaction_configs
-        #   @return [Array<Google::Privacy::Dlp::V2::RedactImageRequest::ImageRedactionConfig>]
-        #     The configuration for specifying what content to redact from images.
-        # @!attribute [rw] include_findings
-        #   @return [true, false]
-        #     Whether the response should include findings along with the redacted
-        #     image.
-        # @!attribute [rw] byte_item
-        #   @return [Google::Privacy::Dlp::V2::ByteContentItem]
-        #     The content must be PNG, JPEG, SVG or BMP.
-        class RedactImageRequest
-          # Configuration for determining how redaction of images should occur.
-          # @!attribute [rw] info_type
-          #   @return [Google::Privacy::Dlp::V2::InfoType]
-          #     Only one per info_type should be provided per request. If not
-          #     specified, and redact_all_text is false, the DLP API will redact all
-          #     text that it matches against all info_types that are found, but not
-          #     specified in another ImageRedactionConfig.
-          # @!attribute [rw] redact_all_text
-          #   @return [true, false]
-          #     If true, all text found in the image, regardless whether it matches an
-          #     info_type, is redacted. Only one should be provided.
-          # @!attribute [rw] redaction_color
-          #   @return [Google::Privacy::Dlp::V2::Color]
-          #     The color to use when redacting content from an image. If not specified,
-          #     the default is black.
-          class ImageRedactionConfig; end
-        end
-
-        # Represents a color in the RGB color space.
-        # @!attribute [rw] red
-        #   @return [Float]
-        #     The amount of red in the color as a value in the interval [0, 1].
-        # @!attribute [rw] green
-        #   @return [Float]
-        #     The amount of green in the color as a value in the interval [0, 1].
-        # @!attribute [rw] blue
-        #   @return [Float]
-        #     The amount of blue in the color as a value in the interval [0, 1].
-        class Color; end
-
-        # Results of redacting an image.
-        # @!attribute [rw] redacted_image
-        #   @return [String]
-        #     The redacted image. The type will be the same as the original image.
-        # @!attribute [rw] extracted_text
-        #   @return [String]
-        #     If an image was being inspected and the InspectConfig's include_quote was
-        #     set to true, then this field will include all text, if any, that was found
-        #     in the image.
-        # @!attribute [rw] inspect_result
-        #   @return [Google::Privacy::Dlp::V2::InspectResult]
-        #     The findings. Populated when include_findings in the request is true.
-        class RedactImageResponse; end
-
-        # Request to de-identify a list of items.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     The parent resource name, for example projects/my-project-id.
-        # @!attribute [rw] deidentify_config
-        #   @return [Google::Privacy::Dlp::V2::DeidentifyConfig]
-        #     Configuration for the de-identification of the content item.
-        #     Items specified here will override the template referenced by the
-        #     deidentify_template_name argument.
-        # @!attribute [rw] inspect_config
-        #   @return [Google::Privacy::Dlp::V2::InspectConfig]
-        #     Configuration for the inspector.
-        #     Items specified here will override the template referenced by the
-        #     inspect_template_name argument.
-        # @!attribute [rw] item
-        #   @return [Google::Privacy::Dlp::V2::ContentItem]
-        #     The item to de-identify. Will be treated as text.
-        # @!attribute [rw] inspect_template_name
-        #   @return [String]
-        #     Template to use. Any configuration directly specified in
-        #     inspect_config will override those set in the template. Singular fields
-        #     that are set in this request will replace their corresponding fields in the
-        #     template. Repeated fields are appended. Singular sub-messages and groups
-        #     are recursively merged.
-        # @!attribute [rw] deidentify_template_name
-        #   @return [String]
-        #     Template to use. Any configuration directly specified in
-        #     deidentify_config will override those set in the template. Singular fields
-        #     that are set in this request will replace their corresponding fields in the
-        #     template. Repeated fields are appended. Singular sub-messages and groups
-        #     are recursively merged.
-        # @!attribute [rw] location_id
-        #   @return [String]
-        #     The geographic location to process de-identification. Reserved for future
-        #     extensions.
-        class DeidentifyContentRequest; end
-
-        # Results of de-identifying a ContentItem.
-        # @!attribute [rw] item
-        #   @return [Google::Privacy::Dlp::V2::ContentItem]
-        #     The de-identified item.
-        # @!attribute [rw] overview
-        #   @return [Google::Privacy::Dlp::V2::TransformationOverview]
-        #     An overview of the changes that were made on the `item`.
-        class DeidentifyContentResponse; end
-
-        # Request to re-identify an item.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. The parent resource name.
-        # @!attribute [rw] reidentify_config
-        #   @return [Google::Privacy::Dlp::V2::DeidentifyConfig]
-        #     Configuration for the re-identification of the content item.
-        #     This field shares the same proto message type that is used for
-        #     de-identification, however its usage here is for the reversal of the
-        #     previous de-identification. Re-identification is performed by examining
-        #     the transformations used to de-identify the items and executing the
-        #     reverse. This requires that only reversible transformations
-        #     be provided here. The reversible transformations are:
-        #
-        #     * `CryptoDeterministicConfig`
-        #       * `CryptoReplaceFfxFpeConfig`
-        # @!attribute [rw] inspect_config
-        #   @return [Google::Privacy::Dlp::V2::InspectConfig]
-        #     Configuration for the inspector.
-        # @!attribute [rw] item
-        #   @return [Google::Privacy::Dlp::V2::ContentItem]
-        #     The item to re-identify. Will be treated as text.
-        # @!attribute [rw] inspect_template_name
-        #   @return [String]
-        #     Template to use. Any configuration directly specified in
-        #     `inspect_config` will override those set in the template. Singular fields
-        #     that are set in this request will replace their corresponding fields in the
-        #     template. Repeated fields are appended. Singular sub-messages and groups
-        #     are recursively merged.
-        # @!attribute [rw] reidentify_template_name
-        #   @return [String]
-        #     Template to use. References an instance of `DeidentifyTemplate`.
-        #     Any configuration directly specified in `reidentify_config` or
-        #     `inspect_config` will override those set in the template. Singular fields
-        #     that are set in this request will replace their corresponding fields in the
-        #     template. Repeated fields are appended. Singular sub-messages and groups
-        #     are recursively merged.
-        # @!attribute [rw] location_id
-        #   @return [String]
-        #     The geographic location to process content reidentification.  Reserved for
-        #     future extensions.
-        class ReidentifyContentRequest; end
-
-        # Results of re-identifying a item.
-        # @!attribute [rw] item
-        #   @return [Google::Privacy::Dlp::V2::ContentItem]
-        #     The re-identified item.
-        # @!attribute [rw] overview
-        #   @return [Google::Privacy::Dlp::V2::TransformationOverview]
-        #     An overview of the changes that were made to the `item`.
-        class ReidentifyContentResponse; end
-
-        # Request to search for potentially sensitive info in a ContentItem.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     The parent resource name, for example projects/my-project-id.
-        # @!attribute [rw] inspect_config
-        #   @return [Google::Privacy::Dlp::V2::InspectConfig]
-        #     Configuration for the inspector. What specified here will override
-        #     the template referenced by the inspect_template_name argument.
-        # @!attribute [rw] item
-        #   @return [Google::Privacy::Dlp::V2::ContentItem]
-        #     The item to inspect.
-        # @!attribute [rw] inspect_template_name
-        #   @return [String]
-        #     Template to use. Any configuration directly specified in
-        #     inspect_config will override those set in the template. Singular fields
-        #     that are set in this request will replace their corresponding fields in the
-        #     template. Repeated fields are appended. Singular sub-messages and groups
-        #     are recursively merged.
-        # @!attribute [rw] location_id
-        #   @return [String]
-        #     The geographic location to process content inspection. Reserved for future
-        #     extensions.
-        class InspectContentRequest; end
-
-        # Results of inspecting an item.
-        # @!attribute [rw] result
-        #   @return [Google::Privacy::Dlp::V2::InspectResult]
-        #     The findings.
-        class InspectContentResponse; end
-
-        # Cloud repository for storing output.
-        # @!attribute [rw] table
-        #   @return [Google::Privacy::Dlp::V2::BigQueryTable]
-        #     Store findings in an existing table or a new table in an existing
-        #     dataset. If table_id is not set a new one will be generated
-        #     for you with the following format:
-        #     dlp_googleapis_yyyy_mm_dd_[dlp_job_id]. Pacific timezone will be used for
-        #     generating the date details.
-        #
-        #     For Inspect, each column in an existing output table must have the same
-        #     name, type, and mode of a field in the `Finding` object.
-        #
-        #     For Risk, an existing output table should be the output of a previous
-        #     Risk analysis job run on the same source table, with the same privacy
-        #     metric and quasi-identifiers. Risk jobs that analyze the same table but
-        #     compute a different privacy metric, or use different sets of
-        #     quasi-identifiers, cannot store their results in the same table.
-        # @!attribute [rw] output_schema
-        #   @return [Google::Privacy::Dlp::V2::OutputStorageConfig::OutputSchema]
-        #     Schema used for writing the findings for Inspect jobs. This field is only
-        #     used for Inspect and must be unspecified for Risk jobs. Columns are derived
-        #     from the `Finding` object. If appending to an existing table, any columns
-        #     from the predefined schema that are missing will be added. No columns in
-        #     the existing table will be deleted.
-        #
-        #     If unspecified, then all available columns will be used for a new table or
-        #     an (existing) table with no schema, and no changes will be made to an
-        #     existing table that has a schema.
-        class OutputStorageConfig
-          # Predefined schemas for storing findings.
-          module OutputSchema
-            # Unused.
-            OUTPUT_SCHEMA_UNSPECIFIED = 0
-
-            # Basic schema including only `info_type`, `quote`, `certainty`, and
-            # `timestamp`.
-            BASIC_COLUMNS = 1
-
-            # Schema tailored to findings from scanning Google Cloud Storage.
-            GCS_COLUMNS = 2
-
-            # Schema tailored to findings from scanning Google Datastore.
-            DATASTORE_COLUMNS = 3
-
-            # Schema tailored to findings from scanning Google BigQuery.
-            BIG_QUERY_COLUMNS = 4
-
-            # Schema containing all columns.
-            ALL_COLUMNS = 5
-          end
-        end
-
-        # Statistics regarding a specific InfoType.
-        # @!attribute [rw] info_type
-        #   @return [Google::Privacy::Dlp::V2::InfoType]
-        #     The type of finding this stat is for.
-        # @!attribute [rw] count
-        #   @return [Integer]
-        #     Number of findings for this infoType.
-        class InfoTypeStats; end
-
-        # The results of an inspect DataSource job.
-        # @!attribute [rw] requested_options
-        #   @return [Google::Privacy::Dlp::V2::InspectDataSourceDetails::RequestedOptions]
-        #     The configuration used for this job.
-        # @!attribute [rw] result
-        #   @return [Google::Privacy::Dlp::V2::InspectDataSourceDetails::Result]
-        #     A summary of the outcome of this inspect job.
-        class InspectDataSourceDetails
-          # Snapshot of the inspection configuration.
-          # @!attribute [rw] snapshot_inspect_template
-          #   @return [Google::Privacy::Dlp::V2::InspectTemplate]
-          #     If run with an InspectTemplate, a snapshot of its state at the time of
-          #     this run.
-          # @!attribute [rw] job_config
-          #   @return [Google::Privacy::Dlp::V2::InspectJobConfig]
-          #     Inspect config.
-          class RequestedOptions; end
-
-          # All result fields mentioned below are updated while the job is processing.
-          # @!attribute [rw] processed_bytes
-          #   @return [Integer]
-          #     Total size in bytes that were processed.
-          # @!attribute [rw] total_estimated_bytes
-          #   @return [Integer]
-          #     Estimate of the number of bytes to process.
-          # @!attribute [rw] info_type_stats
-          #   @return [Array<Google::Privacy::Dlp::V2::InfoTypeStats>]
-          #     Statistics of how many instances of each info type were found during
-          #     inspect job.
-          class Result; end
-        end
-
-        # InfoType description.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Internal name of the infoType.
-        # @!attribute [rw] display_name
-        #   @return [String]
-        #     Human readable form of the infoType name.
-        # @!attribute [rw] supported_by
-        #   @return [Array<Google::Privacy::Dlp::V2::InfoTypeSupportedBy>]
-        #     Which parts of the API supports this InfoType.
-        # @!attribute [rw] description
-        #   @return [String]
-        #     Description of the infotype. Translated when language is provided in the
-        #     request.
-        class InfoTypeDescription; end
-
-        # Request for the list of infoTypes.
-        # @!attribute [rw] language_code
-        #   @return [String]
-        #     BCP-47 language code for localized infoType friendly
-        #     names. If omitted, or if localized strings are not available,
-        #     en-US strings will be returned.
-        # @!attribute [rw] filter
-        #   @return [String]
-        #     filter to only return infoTypes supported by certain parts of the
-        #     API. Defaults to supported_by=INSPECT.
-        # @!attribute [rw] location_id
-        #   @return [String]
-        #     The geographic location to list info types. Reserved for future
-        #     extensions.
-        class ListInfoTypesRequest; end
-
-        # Response to the ListInfoTypes request.
-        # @!attribute [rw] info_types
-        #   @return [Array<Google::Privacy::Dlp::V2::InfoTypeDescription>]
-        #     Set of sensitive infoTypes.
-        class ListInfoTypesResponse; end
-
-        # Configuration for a risk analysis job. See
-        # https://cloud.google.com/dlp/docs/concepts-risk-analysis to learn more.
-        # @!attribute [rw] privacy_metric
-        #   @return [Google::Privacy::Dlp::V2::PrivacyMetric]
-        #     Privacy metric to compute.
-        # @!attribute [rw] source_table
-        #   @return [Google::Privacy::Dlp::V2::BigQueryTable]
-        #     Input dataset to compute metrics over.
-        # @!attribute [rw] actions
-        #   @return [Array<Google::Privacy::Dlp::V2::Action>]
-        #     Actions to execute at the completion of the job. Are executed in the order
-        #     provided.
-        class RiskAnalysisJobConfig; end
-
-        # A column with a semantic tag attached.
-        # @!attribute [rw] field
-        #   @return [Google::Privacy::Dlp::V2::FieldId]
-        #     Required. Identifies the column.
-        # @!attribute [rw] info_type
-        #   @return [Google::Privacy::Dlp::V2::InfoType]
-        #     A column can be tagged with a InfoType to use the relevant public
-        #     dataset as a statistical model of population, if available. We
-        #     currently support US ZIP codes, region codes, ages and genders.
-        #     To programmatically obtain the list of supported InfoTypes, use
-        #     ListInfoTypes with the supported_by=RISK_ANALYSIS filter.
-        # @!attribute [rw] custom_tag
-        #   @return [String]
-        #     A column can be tagged with a custom tag. In this case, the user must
-        #     indicate an auxiliary table that contains statistical information on
-        #     the possible values of this column (below).
-        # @!attribute [rw] inferred
-        #   @return [Google::Protobuf::Empty]
-        #     If no semantic tag is indicated, we infer the statistical model from
-        #     the distribution of values in the input data
-        class QuasiId; end
-
-        # An auxiliary table containing statistical information on the relative
-        # frequency of different quasi-identifiers values. It has one or several
-        # quasi-identifiers columns, and one column that indicates the relative
-        # frequency of each quasi-identifier tuple.
-        # If a tuple is present in the data but not in the auxiliary table, the
-        # corresponding relative frequency is assumed to be zero (and thus, the
-        # tuple is highly reidentifiable).
-        # @!attribute [rw] table
-        #   @return [Google::Privacy::Dlp::V2::BigQueryTable]
-        #     Required. Auxiliary table location.
-        # @!attribute [rw] quasi_ids
-        #   @return [Array<Google::Privacy::Dlp::V2::StatisticalTable::QuasiIdentifierField>]
-        #     Required. Quasi-identifier columns.
-        # @!attribute [rw] relative_frequency
-        #   @return [Google::Privacy::Dlp::V2::FieldId]
-        #     Required. The relative frequency column must contain a floating-point number
-        #     between 0 and 1 (inclusive). Null values are assumed to be zero.
-        class StatisticalTable
-          # A quasi-identifier column has a custom_tag, used to know which column
-          # in the data corresponds to which column in the statistical model.
-          # @!attribute [rw] field
-          #   @return [Google::Privacy::Dlp::V2::FieldId]
-          #     Identifies the column.
-          # @!attribute [rw] custom_tag
-          #   @return [String]
-          #     A column can be tagged with a custom tag. In this case, the user must
-          #     indicate an auxiliary table that contains statistical information on
-          #     the possible values of this column (below).
-          class QuasiIdentifierField; end
-        end
-
-        # Privacy metric to compute for reidentification risk analysis.
-        # @!attribute [rw] numerical_stats_config
-        #   @return [Google::Privacy::Dlp::V2::PrivacyMetric::NumericalStatsConfig]
-        #     Numerical stats
-        # @!attribute [rw] categorical_stats_config
-        #   @return [Google::Privacy::Dlp::V2::PrivacyMetric::CategoricalStatsConfig]
-        #     Categorical stats
-        # @!attribute [rw] k_anonymity_config
-        #   @return [Google::Privacy::Dlp::V2::PrivacyMetric::KAnonymityConfig]
-        #     K-anonymity
-        # @!attribute [rw] l_diversity_config
-        #   @return [Google::Privacy::Dlp::V2::PrivacyMetric::LDiversityConfig]
-        #     l-diversity
-        # @!attribute [rw] k_map_estimation_config
-        #   @return [Google::Privacy::Dlp::V2::PrivacyMetric::KMapEstimationConfig]
-        #     k-map
-        # @!attribute [rw] delta_presence_estimation_config
-        #   @return [Google::Privacy::Dlp::V2::PrivacyMetric::DeltaPresenceEstimationConfig]
-        #     delta-presence
-        class PrivacyMetric
-          # Compute numerical stats over an individual column, including
-          # min, max, and quantiles.
-          # @!attribute [rw] field
-          #   @return [Google::Privacy::Dlp::V2::FieldId]
-          #     Field to compute numerical stats on. Supported types are
-          #     integer, float, date, datetime, timestamp, time.
-          class NumericalStatsConfig; end
-
-          # Compute numerical stats over an individual column, including
-          # number of distinct values and value count distribution.
-          # @!attribute [rw] field
-          #   @return [Google::Privacy::Dlp::V2::FieldId]
-          #     Field to compute categorical stats on. All column types are
-          #     supported except for arrays and structs. However, it may be more
-          #     informative to use NumericalStats when the field type is supported,
-          #     depending on the data.
-          class CategoricalStatsConfig; end
-
-          # k-anonymity metric, used for analysis of reidentification risk.
-          # @!attribute [rw] quasi_ids
-          #   @return [Array<Google::Privacy::Dlp::V2::FieldId>]
-          #     Set of fields to compute k-anonymity over. When multiple fields are
-          #     specified, they are considered a single composite key. Structs and
-          #     repeated data types are not supported; however, nested fields are
-          #     supported so long as they are not structs themselves or nested within
-          #     a repeated field.
-          # @!attribute [rw] entity_id
-          #   @return [Google::Privacy::Dlp::V2::EntityId]
-          #     Message indicating that multiple rows might be associated to a
-          #     single individual. If the same entity_id is associated to multiple
-          #     quasi-identifier tuples over distinct rows, we consider the entire
-          #     collection of tuples as the composite quasi-identifier. This collection
-          #     is a multiset: the order in which the different tuples appear in the
-          #     dataset is ignored, but their frequency is taken into account.
-          #
-          #     Important note: a maximum of 1000 rows can be associated to a single
-          #     entity ID. If more rows are associated with the same entity ID, some
-          #     might be ignored.
-          class KAnonymityConfig; end
-
-          # l-diversity metric, used for analysis of reidentification risk.
-          # @!attribute [rw] quasi_ids
-          #   @return [Array<Google::Privacy::Dlp::V2::FieldId>]
-          #     Set of quasi-identifiers indicating how equivalence classes are
-          #     defined for the l-diversity computation. When multiple fields are
-          #     specified, they are considered a single composite key.
-          # @!attribute [rw] sensitive_attribute
-          #   @return [Google::Privacy::Dlp::V2::FieldId]
-          #     Sensitive field for computing the l-value.
-          class LDiversityConfig; end
-
-          # Reidentifiability metric. This corresponds to a risk model similar to what
-          # is called "journalist risk" in the literature, except the attack dataset is
-          # statistically modeled instead of being perfectly known. This can be done
-          # using publicly available data (like the US Census), or using a custom
-          # statistical model (indicated as one or several BigQuery tables), or by
-          # extrapolating from the distribution of values in the input dataset.
-          # @!attribute [rw] quasi_ids
-          #   @return [Array<Google::Privacy::Dlp::V2::PrivacyMetric::KMapEstimationConfig::TaggedField>]
-          #     Required. Fields considered to be quasi-identifiers. No two columns can have the
-          #     same tag.
-          # @!attribute [rw] region_code
-          #   @return [String]
-          #     ISO 3166-1 alpha-2 region code to use in the statistical modeling.
-          #     Set if no column is tagged with a region-specific InfoType (like
-          #     US_ZIP_5) or a region code.
-          # @!attribute [rw] auxiliary_tables
-          #   @return [Array<Google::Privacy::Dlp::V2::PrivacyMetric::KMapEstimationConfig::AuxiliaryTable>]
-          #     Several auxiliary tables can be used in the analysis. Each custom_tag
-          #     used to tag a quasi-identifiers column must appear in exactly one column
-          #     of one auxiliary table.
-          class KMapEstimationConfig
-            # A column with a semantic tag attached.
-            # @!attribute [rw] field
-            #   @return [Google::Privacy::Dlp::V2::FieldId]
-            #     Required. Identifies the column.
-            # @!attribute [rw] info_type
-            #   @return [Google::Privacy::Dlp::V2::InfoType]
-            #     A column can be tagged with a InfoType to use the relevant public
-            #     dataset as a statistical model of population, if available. We
-            #     currently support US ZIP codes, region codes, ages and genders.
-            #     To programmatically obtain the list of supported InfoTypes, use
-            #     ListInfoTypes with the supported_by=RISK_ANALYSIS filter.
-            # @!attribute [rw] custom_tag
-            #   @return [String]
-            #     A column can be tagged with a custom tag. In this case, the user must
-            #     indicate an auxiliary table that contains statistical information on
-            #     the possible values of this column (below).
-            # @!attribute [rw] inferred
-            #   @return [Google::Protobuf::Empty]
-            #     If no semantic tag is indicated, we infer the statistical model from
-            #     the distribution of values in the input data
-            class TaggedField; end
-
-            # An auxiliary table contains statistical information on the relative
-            # frequency of different quasi-identifiers values. It has one or several
-            # quasi-identifiers columns, and one column that indicates the relative
-            # frequency of each quasi-identifier tuple.
-            # If a tuple is present in the data but not in the auxiliary table, the
-            # corresponding relative frequency is assumed to be zero (and thus, the
-            # tuple is highly reidentifiable).
-            # @!attribute [rw] table
-            #   @return [Google::Privacy::Dlp::V2::BigQueryTable]
-            #     Required. Auxiliary table location.
-            # @!attribute [rw] quasi_ids
-            #   @return [Array<Google::Privacy::Dlp::V2::PrivacyMetric::KMapEstimationConfig::AuxiliaryTable::QuasiIdField>]
-            #     Required. Quasi-identifier columns.
-            # @!attribute [rw] relative_frequency
-            #   @return [Google::Privacy::Dlp::V2::FieldId]
-            #     Required. The relative frequency column must contain a floating-point number
-            #     between 0 and 1 (inclusive). Null values are assumed to be zero.
-            class AuxiliaryTable
-              # A quasi-identifier column has a custom_tag, used to know which column
-              # in the data corresponds to which column in the statistical model.
-              # @!attribute [rw] field
-              #   @return [Google::Privacy::Dlp::V2::FieldId]
-              #     Identifies the column.
-              # @!attribute [rw] custom_tag
-              #   @return [String]
-              #     A auxiliary field.
-              class QuasiIdField; end
-            end
-          end
-
-          # δ-presence metric, used to estimate how likely it is for an attacker to
-          # figure out that one given individual appears in a de-identified dataset.
-          # Similarly to the k-map metric, we cannot compute δ-presence exactly without
-          # knowing the attack dataset, so we use a statistical model instead.
-          # @!attribute [rw] quasi_ids
-          #   @return [Array<Google::Privacy::Dlp::V2::QuasiId>]
-          #     Required. Fields considered to be quasi-identifiers. No two fields can have the
-          #     same tag.
-          # @!attribute [rw] region_code
-          #   @return [String]
-          #     ISO 3166-1 alpha-2 region code to use in the statistical modeling.
-          #     Set if no column is tagged with a region-specific InfoType (like
-          #     US_ZIP_5) or a region code.
-          # @!attribute [rw] auxiliary_tables
-          #   @return [Array<Google::Privacy::Dlp::V2::StatisticalTable>]
-          #     Several auxiliary tables can be used in the analysis. Each custom_tag
-          #     used to tag a quasi-identifiers field must appear in exactly one
-          #     field of one auxiliary table.
-          class DeltaPresenceEstimationConfig; end
-        end
-
-        # Result of a risk analysis operation request.
-        # @!attribute [rw] requested_privacy_metric
-        #   @return [Google::Privacy::Dlp::V2::PrivacyMetric]
-        #     Privacy metric to compute.
-        # @!attribute [rw] requested_source_table
-        #   @return [Google::Privacy::Dlp::V2::BigQueryTable]
-        #     Input dataset to compute metrics over.
-        # @!attribute [rw] numerical_stats_result
-        #   @return [Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails::NumericalStatsResult]
-        #     Numerical stats result
-        # @!attribute [rw] categorical_stats_result
-        #   @return [Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails::CategoricalStatsResult]
-        #     Categorical stats result
-        # @!attribute [rw] k_anonymity_result
-        #   @return [Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails::KAnonymityResult]
-        #     K-anonymity result
-        # @!attribute [rw] l_diversity_result
-        #   @return [Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails::LDiversityResult]
-        #     L-divesity result
-        # @!attribute [rw] k_map_estimation_result
-        #   @return [Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails::KMapEstimationResult]
-        #     K-map result
-        # @!attribute [rw] delta_presence_estimation_result
-        #   @return [Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails::DeltaPresenceEstimationResult]
-        #     Delta-presence result
-        class AnalyzeDataSourceRiskDetails
-          # Result of the numerical stats computation.
-          # @!attribute [rw] min_value
-          #   @return [Google::Privacy::Dlp::V2::Value]
-          #     Minimum value appearing in the column.
-          # @!attribute [rw] max_value
-          #   @return [Google::Privacy::Dlp::V2::Value]
-          #     Maximum value appearing in the column.
-          # @!attribute [rw] quantile_values
-          #   @return [Array<Google::Privacy::Dlp::V2::Value>]
-          #     List of 99 values that partition the set of field values into 100 equal
-          #     sized buckets.
-          class NumericalStatsResult; end
-
-          # Result of the categorical stats computation.
-          # @!attribute [rw] value_frequency_histogram_buckets
-          #   @return [Array<Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails::CategoricalStatsResult::CategoricalStatsHistogramBucket>]
-          #     Histogram of value frequencies in the column.
-          class CategoricalStatsResult
-            # Histogram of value frequencies in the column.
-            # @!attribute [rw] value_frequency_lower_bound
-            #   @return [Integer]
-            #     Lower bound on the value frequency of the values in this bucket.
-            # @!attribute [rw] value_frequency_upper_bound
-            #   @return [Integer]
-            #     Upper bound on the value frequency of the values in this bucket.
-            # @!attribute [rw] bucket_size
-            #   @return [Integer]
-            #     Total number of values in this bucket.
-            # @!attribute [rw] bucket_values
-            #   @return [Array<Google::Privacy::Dlp::V2::ValueFrequency>]
-            #     Sample of value frequencies in this bucket. The total number of
-            #     values returned per bucket is capped at 20.
-            # @!attribute [rw] bucket_value_count
-            #   @return [Integer]
-            #     Total number of distinct values in this bucket.
-            class CategoricalStatsHistogramBucket; end
-          end
-
-          # Result of the k-anonymity computation.
-          # @!attribute [rw] equivalence_class_histogram_buckets
-          #   @return [Array<Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails::KAnonymityResult::KAnonymityHistogramBucket>]
-          #     Histogram of k-anonymity equivalence classes.
-          class KAnonymityResult
-            # The set of columns' values that share the same ldiversity value
-            # @!attribute [rw] quasi_ids_values
-            #   @return [Array<Google::Privacy::Dlp::V2::Value>]
-            #     Set of values defining the equivalence class. One value per
-            #     quasi-identifier column in the original KAnonymity metric message.
-            #     The order is always the same as the original request.
-            # @!attribute [rw] equivalence_class_size
-            #   @return [Integer]
-            #     Size of the equivalence class, for example number of rows with the
-            #     above set of values.
-            class KAnonymityEquivalenceClass; end
-
-            # Histogram of k-anonymity equivalence classes.
-            # @!attribute [rw] equivalence_class_size_lower_bound
-            #   @return [Integer]
-            #     Lower bound on the size of the equivalence classes in this bucket.
-            # @!attribute [rw] equivalence_class_size_upper_bound
-            #   @return [Integer]
-            #     Upper bound on the size of the equivalence classes in this bucket.
-            # @!attribute [rw] bucket_size
-            #   @return [Integer]
-            #     Total number of equivalence classes in this bucket.
-            # @!attribute [rw] bucket_values
-            #   @return [Array<Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails::KAnonymityResult::KAnonymityEquivalenceClass>]
-            #     Sample of equivalence classes in this bucket. The total number of
-            #     classes returned per bucket is capped at 20.
-            # @!attribute [rw] bucket_value_count
-            #   @return [Integer]
-            #     Total number of distinct equivalence classes in this bucket.
-            class KAnonymityHistogramBucket; end
-          end
-
-          # Result of the l-diversity computation.
-          # @!attribute [rw] sensitive_value_frequency_histogram_buckets
-          #   @return [Array<Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails::LDiversityResult::LDiversityHistogramBucket>]
-          #     Histogram of l-diversity equivalence class sensitive value frequencies.
-          class LDiversityResult
-            # The set of columns' values that share the same ldiversity value.
-            # @!attribute [rw] quasi_ids_values
-            #   @return [Array<Google::Privacy::Dlp::V2::Value>]
-            #     Quasi-identifier values defining the k-anonymity equivalence
-            #     class. The order is always the same as the original request.
-            # @!attribute [rw] equivalence_class_size
-            #   @return [Integer]
-            #     Size of the k-anonymity equivalence class.
-            # @!attribute [rw] num_distinct_sensitive_values
-            #   @return [Integer]
-            #     Number of distinct sensitive values in this equivalence class.
-            # @!attribute [rw] top_sensitive_values
-            #   @return [Array<Google::Privacy::Dlp::V2::ValueFrequency>]
-            #     Estimated frequencies of top sensitive values.
-            class LDiversityEquivalenceClass; end
-
-            # Histogram of l-diversity equivalence class sensitive value frequencies.
-            # @!attribute [rw] sensitive_value_frequency_lower_bound
-            #   @return [Integer]
-            #     Lower bound on the sensitive value frequencies of the equivalence
-            #     classes in this bucket.
-            # @!attribute [rw] sensitive_value_frequency_upper_bound
-            #   @return [Integer]
-            #     Upper bound on the sensitive value frequencies of the equivalence
-            #     classes in this bucket.
-            # @!attribute [rw] bucket_size
-            #   @return [Integer]
-            #     Total number of equivalence classes in this bucket.
-            # @!attribute [rw] bucket_values
-            #   @return [Array<Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails::LDiversityResult::LDiversityEquivalenceClass>]
-            #     Sample of equivalence classes in this bucket. The total number of
-            #     classes returned per bucket is capped at 20.
-            # @!attribute [rw] bucket_value_count
-            #   @return [Integer]
-            #     Total number of distinct equivalence classes in this bucket.
-            class LDiversityHistogramBucket; end
-          end
-
-          # Result of the reidentifiability analysis. Note that these results are an
-          # estimation, not exact values.
-          # @!attribute [rw] k_map_estimation_histogram
-          #   @return [Array<Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails::KMapEstimationResult::KMapEstimationHistogramBucket>]
-          #     The intervals [min_anonymity, max_anonymity] do not overlap. If a value
-          #     doesn't correspond to any such interval, the associated frequency is
-          #     zero. For example, the following records:
-          #       {min_anonymity: 1, max_anonymity: 1, frequency: 17}
-          #       {min_anonymity: 2, max_anonymity: 3, frequency: 42}
-          #       {min_anonymity: 5, max_anonymity: 10, frequency: 99}
-          #     mean that there are no record with an estimated anonymity of 4, 5, or
-          #     larger than 10.
-          class KMapEstimationResult
-            # A tuple of values for the quasi-identifier columns.
-            # @!attribute [rw] quasi_ids_values
-            #   @return [Array<Google::Privacy::Dlp::V2::Value>]
-            #     The quasi-identifier values.
-            # @!attribute [rw] estimated_anonymity
-            #   @return [Integer]
-            #     The estimated anonymity for these quasi-identifier values.
-            class KMapEstimationQuasiIdValues; end
-
-            # A KMapEstimationHistogramBucket message with the following values:
-            #   min_anonymity: 3
-            #   max_anonymity: 5
-            #   frequency: 42
-            # means that there are 42 records whose quasi-identifier values correspond
-            # to 3, 4 or 5 people in the overlying population. An important particular
-            # case is when min_anonymity = max_anonymity = 1: the frequency field then
-            # corresponds to the number of uniquely identifiable records.
-            # @!attribute [rw] min_anonymity
-            #   @return [Integer]
-            #     Always positive.
-            # @!attribute [rw] max_anonymity
-            #   @return [Integer]
-            #     Always greater than or equal to min_anonymity.
-            # @!attribute [rw] bucket_size
-            #   @return [Integer]
-            #     Number of records within these anonymity bounds.
-            # @!attribute [rw] bucket_values
-            #   @return [Array<Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails::KMapEstimationResult::KMapEstimationQuasiIdValues>]
-            #     Sample of quasi-identifier tuple values in this bucket. The total
-            #     number of classes returned per bucket is capped at 20.
-            # @!attribute [rw] bucket_value_count
-            #   @return [Integer]
-            #     Total number of distinct quasi-identifier tuple values in this bucket.
-            class KMapEstimationHistogramBucket; end
-          end
-
-          # Result of the δ-presence computation. Note that these results are an
-          # estimation, not exact values.
-          # @!attribute [rw] delta_presence_estimation_histogram
-          #   @return [Array<Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails::DeltaPresenceEstimationResult::DeltaPresenceEstimationHistogramBucket>]
-          #     The intervals [min_probability, max_probability) do not overlap. If a
-          #     value doesn't correspond to any such interval, the associated frequency
-          #     is zero. For example, the following records:
-          #       {min_probability: 0, max_probability: 0.1, frequency: 17}
-          #       {min_probability: 0.2, max_probability: 0.3, frequency: 42}
-          #       {min_probability: 0.3, max_probability: 0.4, frequency: 99}
-          #     mean that there are no record with an estimated probability in [0.1, 0.2)
-          #     nor larger or equal to 0.4.
-          class DeltaPresenceEstimationResult
-            # A tuple of values for the quasi-identifier columns.
-            # @!attribute [rw] quasi_ids_values
-            #   @return [Array<Google::Privacy::Dlp::V2::Value>]
-            #     The quasi-identifier values.
-            # @!attribute [rw] estimated_probability
-            #   @return [Float]
-            #     The estimated probability that a given individual sharing these
-            #     quasi-identifier values is in the dataset. This value, typically called
-            #     δ, is the ratio between the number of records in the dataset with these
-            #     quasi-identifier values, and the total number of individuals (inside
-            #     *and* outside the dataset) with these quasi-identifier values.
-            #     For example, if there are 15 individuals in the dataset who share the
-            #     same quasi-identifier values, and an estimated 100 people in the entire
-            #     population with these values, then δ is 0.15.
-            class DeltaPresenceEstimationQuasiIdValues; end
-
-            # A DeltaPresenceEstimationHistogramBucket message with the following
-            # values:
-            #   min_probability: 0.1
-            #   max_probability: 0.2
-            #   frequency: 42
-            # means that there are 42 records for which δ is in [0.1, 0.2). An
-            # important particular case is when min_probability = max_probability = 1:
-            # then, every individual who shares this quasi-identifier combination is in
-            # the dataset.
-            # @!attribute [rw] min_probability
-            #   @return [Float]
-            #     Between 0 and 1.
-            # @!attribute [rw] max_probability
-            #   @return [Float]
-            #     Always greater than or equal to min_probability.
-            # @!attribute [rw] bucket_size
-            #   @return [Integer]
-            #     Number of records within these probability bounds.
-            # @!attribute [rw] bucket_values
-            #   @return [Array<Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails::DeltaPresenceEstimationResult::DeltaPresenceEstimationQuasiIdValues>]
-            #     Sample of quasi-identifier tuple values in this bucket. The total
-            #     number of classes returned per bucket is capped at 20.
-            # @!attribute [rw] bucket_value_count
-            #   @return [Integer]
-            #     Total number of distinct quasi-identifier tuple values in this bucket.
-            class DeltaPresenceEstimationHistogramBucket; end
-          end
-        end
-
-        # A value of a field, including its frequency.
-        # @!attribute [rw] value
-        #   @return [Google::Privacy::Dlp::V2::Value]
-        #     A value contained in the field in question.
-        # @!attribute [rw] count
-        #   @return [Integer]
-        #     How many times the value is contained in the field.
-        class ValueFrequency; end
-
-        # Set of primitive values supported by the system.
-        # Note that for the purposes of inspection or transformation, the number
-        # of bytes considered to comprise a 'Value' is based on its representation
-        # as a UTF-8 encoded string. For example, if 'integer_value' is set to
-        # 123456789, the number of bytes would be counted as 9, even though an
-        # int64 only holds up to 8 bytes of data.
-        # @!attribute [rw] integer_value
-        #   @return [Integer]
-        #     integer
-        # @!attribute [rw] float_value
-        #   @return [Float]
-        #     float
-        # @!attribute [rw] string_value
-        #   @return [String]
-        #     string
-        # @!attribute [rw] boolean_value
-        #   @return [true, false]
-        #     boolean
-        # @!attribute [rw] timestamp_value
-        #   @return [Google::Protobuf::Timestamp]
-        #     timestamp
-        # @!attribute [rw] time_value
-        #   @return [Google::Type::TimeOfDay]
-        #     time of day
-        # @!attribute [rw] date_value
-        #   @return [Google::Type::Date]
-        #     date
-        # @!attribute [rw] day_of_week_value
-        #   @return [Google::Type::DayOfWeek]
-        #     day of week
-        class Value; end
-
-        # Message for infoType-dependent details parsed from quote.
-        # @!attribute [rw] date_time
-        #   @return [Google::Privacy::Dlp::V2::DateTime]
-        #     The date time indicated by the quote.
-        class QuoteInfo; end
-
-        # Message for a date time object.
-        # e.g. 2018-01-01, 5th August.
-        # @!attribute [rw] date
-        #   @return [Google::Type::Date]
-        #     One or more of the following must be set.
-        #     Must be a valid date or time value.
-        # @!attribute [rw] day_of_week
-        #   @return [Google::Type::DayOfWeek]
-        #     Day of week
-        # @!attribute [rw] time
-        #   @return [Google::Type::TimeOfDay]
-        #     Time of day
-        # @!attribute [rw] time_zone
-        #   @return [Google::Privacy::Dlp::V2::DateTime::TimeZone]
-        #     Time zone
-        class DateTime
-          # Time zone of the date time object.
-          # @!attribute [rw] offset_minutes
-          #   @return [Integer]
-          #     Set only if the offset can be determined. Positive for time ahead of UTC.
-          #     E.g. For "UTC-9", this value is -540.
-          class TimeZone; end
-        end
-
-        # The configuration that controls how the data will change.
-        # @!attribute [rw] info_type_transformations
-        #   @return [Google::Privacy::Dlp::V2::InfoTypeTransformations]
-        #     Treat the dataset as free-form text and apply the same free text
-        #     transformation everywhere.
-        # @!attribute [rw] record_transformations
-        #   @return [Google::Privacy::Dlp::V2::RecordTransformations]
-        #     Treat the dataset as structured. Transformations can be applied to
-        #     specific locations within structured datasets, such as transforming
-        #     a column within a table.
-        class DeidentifyConfig; end
-
-        # A rule for transforming a value.
-        # @!attribute [rw] replace_config
-        #   @return [Google::Privacy::Dlp::V2::ReplaceValueConfig]
-        #     Replace
-        # @!attribute [rw] redact_config
-        #   @return [Google::Privacy::Dlp::V2::RedactConfig]
-        #     Redact
-        # @!attribute [rw] character_mask_config
-        #   @return [Google::Privacy::Dlp::V2::CharacterMaskConfig]
-        #     Mask
-        # @!attribute [rw] crypto_replace_ffx_fpe_config
-        #   @return [Google::Privacy::Dlp::V2::CryptoReplaceFfxFpeConfig]
-        #     Ffx-Fpe
-        # @!attribute [rw] fixed_size_bucketing_config
-        #   @return [Google::Privacy::Dlp::V2::FixedSizeBucketingConfig]
-        #     Fixed size bucketing
-        # @!attribute [rw] bucketing_config
-        #   @return [Google::Privacy::Dlp::V2::BucketingConfig]
-        #     Bucketing
-        # @!attribute [rw] replace_with_info_type_config
-        #   @return [Google::Privacy::Dlp::V2::ReplaceWithInfoTypeConfig]
-        #     Replace with infotype
-        # @!attribute [rw] time_part_config
-        #   @return [Google::Privacy::Dlp::V2::TimePartConfig]
-        #     Time extraction
-        # @!attribute [rw] crypto_hash_config
-        #   @return [Google::Privacy::Dlp::V2::CryptoHashConfig]
-        #     Crypto
-        # @!attribute [rw] date_shift_config
-        #   @return [Google::Privacy::Dlp::V2::DateShiftConfig]
-        #     Date Shift
-        # @!attribute [rw] crypto_deterministic_config
-        #   @return [Google::Privacy::Dlp::V2::CryptoDeterministicConfig]
-        #     Deterministic Crypto
-        class PrimitiveTransformation; end
-
-        # For use with `Date`, `Timestamp`, and `TimeOfDay`, extract or preserve a
-        # portion of the value.
-        # @!attribute [rw] part_to_extract
-        #   @return [Google::Privacy::Dlp::V2::TimePartConfig::TimePart]
-        #     The part of the time to keep.
-        class TimePartConfig
-          # Components that make up time.
-          module TimePart
-            # Unused
-            TIME_PART_UNSPECIFIED = 0
-
-            # [0-9999]
-            YEAR = 1
-
-            # [1-12]
-            MONTH = 2
-
-            # [1-31]
-            DAY_OF_MONTH = 3
-
-            # [1-7]
-            DAY_OF_WEEK = 4
-
-            # [1-53]
-            WEEK_OF_YEAR = 5
-
-            # [0-23]
-            HOUR_OF_DAY = 6
-          end
-        end
-
-        # Pseudonymization method that generates surrogates via cryptographic hashing.
-        # Uses SHA-256.
-        # The key size must be either 32 or 64 bytes.
-        # Outputs a base64 encoded representation of the hashed output
-        # (for example, L7k0BHmF1ha5U3NfGykjro4xWi1MPVQPjhMAZbSV9mM=).
-        # Currently, only string and integer values can be hashed.
-        # See https://cloud.google.com/dlp/docs/pseudonymization to learn more.
-        # @!attribute [rw] crypto_key
-        #   @return [Google::Privacy::Dlp::V2::CryptoKey]
-        #     The key used by the hash function.
-        class CryptoHashConfig; end
-
-        # Pseudonymization method that generates deterministic encryption for the given
-        # input. Outputs a base64 encoded representation of the encrypted output.
-        # Uses AES-SIV based on the RFC https://tools.ietf.org/html/rfc5297.
-        # @!attribute [rw] crypto_key
-        #   @return [Google::Privacy::Dlp::V2::CryptoKey]
-        #     The key used by the encryption function.
-        # @!attribute [rw] surrogate_info_type
-        #   @return [Google::Privacy::Dlp::V2::InfoType]
-        #     The custom info type to annotate the surrogate with.
-        #     This annotation will be applied to the surrogate by prefixing it with
-        #     the name of the custom info type followed by the number of
-        #     characters comprising the surrogate. The following scheme defines the
-        #     format: {info type name}({surrogate character count}):\\{surrogate}
-        #
-        #     For example, if the name of custom info type is 'MY_TOKEN_INFO_TYPE' and
-        #     the surrogate is 'abc', the full replacement value
-        #     will be: 'MY_TOKEN_INFO_TYPE(3):abc'
-        #
-        #     This annotation identifies the surrogate when inspecting content using the
-        #     custom info type 'Surrogate'. This facilitates reversal of the
-        #     surrogate when it occurs in free text.
-        #
-        #     Note: For record transformations where the entire cell in a table is being
-        #     transformed, surrogates are not mandatory. Surrogates are used to denote
-        #     the location of the token and are necessary for re-identification in free
-        #     form text.
-        #
-        #     In order for inspection to work properly, the name of this info type must
-        #     not occur naturally anywhere in your data; otherwise, inspection may either
-        #
-        #     * reverse a surrogate that does not correspond to an actual identifier
-        #     * be unable to parse the surrogate and result in an error
-        #
-        #     Therefore, choose your custom info type name carefully after considering
-        #     what your data looks like. One way to select a name that has a high chance
-        #     of yielding reliable detection is to include one or more unicode characters
-        #     that are highly improbable to exist in your data.
-        #     For example, assuming your data is entered from a regular ASCII keyboard,
-        #     the symbol with the hex code point 29DD might be used like so:
-        #     ⧝MY_TOKEN_TYPE.
-        # @!attribute [rw] context
-        #   @return [Google::Privacy::Dlp::V2::FieldId]
-        #     A context may be used for higher security and maintaining
-        #     referential integrity such that the same identifier in two different
-        #     contexts will be given a distinct surrogate. The context is appended to
-        #     plaintext value being encrypted. On decryption the provided context is
-        #     validated against the value used during encryption. If a context was
-        #     provided during encryption, same context must be provided during decryption
-        #     as well.
-        #
-        #     If the context is not set, plaintext would be used as is for encryption.
-        #     If the context is set but:
-        #
-        #     1. there is no record present when transforming a given value or
-        #     2. the field is not present when transforming a given value,
-        #
-        #     plaintext would be used as is for encryption.
-        #
-        #     Note that case (1) is expected when an `InfoTypeTransformation` is
-        #     applied to both structured and non-structured `ContentItem`s.
-        class CryptoDeterministicConfig; end
-
-        # Replace each input value with a given `Value`.
-        # @!attribute [rw] new_value
-        #   @return [Google::Privacy::Dlp::V2::Value]
-        #     Value to replace it with.
-        class ReplaceValueConfig; end
-
-        # Replace each matching finding with the name of the info_type.
-        class ReplaceWithInfoTypeConfig; end
-
-        # Redact a given value. For example, if used with an `InfoTypeTransformation`
-        # transforming PHONE_NUMBER, and input 'My phone number is 206-555-0123', the
-        # output would be 'My phone number is '.
-        class RedactConfig; end
-
-        # Characters to skip when doing deidentification of a value. These will be left
-        # alone and skipped.
-        # @!attribute [rw] characters_to_skip
-        #   @return [String]
-        #     Characters to not transform when masking.
-        # @!attribute [rw] common_characters_to_ignore
-        #   @return [Google::Privacy::Dlp::V2::CharsToIgnore::CommonCharsToIgnore]
-        #     Common characters to not transform when masking. Useful to avoid removing
-        #     punctuation.
-        class CharsToIgnore
-          # Convenience enum for indication common characters to not transform.
-          module CommonCharsToIgnore
-            # Unused.
-            COMMON_CHARS_TO_IGNORE_UNSPECIFIED = 0
-
-            # 0-9
-            NUMERIC = 1
-
-            # A-Z
-            ALPHA_UPPER_CASE = 2
-
-            # a-z
-            ALPHA_LOWER_CASE = 3
-
-            # US Punctuation, one of !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
-            PUNCTUATION = 4
-
-            # Whitespace character, one of [ \t\n\x0B\f\r]
-            WHITESPACE = 5
-          end
-        end
-
-        # Partially mask a string by replacing a given number of characters with a
-        # fixed character. Masking can start from the beginning or end of the string.
-        # This can be used on data of any type (numbers, longs, and so on) and when
-        # de-identifying structured data we'll attempt to preserve the original data's
-        # type. (This allows you to take a long like 123 and modify it to a string like
-        # **3.
-        # @!attribute [rw] masking_character
-        #   @return [String]
-        #     Character to use to mask the sensitive values&mdash;for example, `*` for an
-        #     alphabetic string such as a name, or `0` for a numeric string such as ZIP
-        #     code or credit card number. This string must have a length of 1. If not
-        #     supplied, this value defaults to `*` for strings, and `0` for digits.
-        # @!attribute [rw] number_to_mask
-        #   @return [Integer]
-        #     Number of characters to mask. If not set, all matching chars will be
-        #     masked. Skipped characters do not count towards this tally.
-        # @!attribute [rw] reverse_order
-        #   @return [true, false]
-        #     Mask characters in reverse order. For example, if `masking_character` is
-        #     `0`, `number_to_mask` is `14`, and `reverse_order` is `false`, then the
-        #     input string `1234-5678-9012-3456` is masked as `00000000000000-3456`.
-        #     If `masking_character` is `*`, `number_to_mask` is `3`, and `reverse_order`
-        #     is `true`, then the string `12345` is masked as `12***`.
-        # @!attribute [rw] characters_to_ignore
-        #   @return [Array<Google::Privacy::Dlp::V2::CharsToIgnore>]
-        #     When masking a string, items in this list will be skipped when replacing
-        #     characters. For example, if the input string is `555-555-5555` and you
-        #     instruct Cloud DLP to skip `-` and mask 5 characters with `*`, Cloud DLP
-        #     returns `***-**5-5555`.
-        class CharacterMaskConfig; end
-
-        # Buckets values based on fixed size ranges. The
-        # Bucketing transformation can provide all of this functionality,
-        # but requires more configuration. This message is provided as a convenience to
-        # the user for simple bucketing strategies.
-        #
-        # The transformed value will be a hyphenated string of
-        # \\{lower_bound}-\\{upper_bound}, i.e if lower_bound = 10 and upper_bound = 20
-        # all values that are within this bucket will be replaced with "10-20".
-        #
-        # This can be used on data of type: double, long.
-        #
-        # If the bound Value type differs from the type of data
-        # being transformed, we will first attempt converting the type of the data to
-        # be transformed to match the type of the bound before comparing.
-        #
-        # See https://cloud.google.com/dlp/docs/concepts-bucketing to learn more.
-        # @!attribute [rw] lower_bound
-        #   @return [Google::Privacy::Dlp::V2::Value]
-        #     Required. Lower bound value of buckets. All values less than `lower_bound` are
-        #     grouped together into a single bucket; for example if `lower_bound` = 10,
-        #     then all values less than 10 are replaced with the value “-10”.
-        # @!attribute [rw] upper_bound
-        #   @return [Google::Privacy::Dlp::V2::Value]
-        #     Required. Upper bound value of buckets. All values greater than upper_bound are
-        #     grouped together into a single bucket; for example if `upper_bound` = 89,
-        #     then all values greater than 89 are replaced with the value “89+”.
-        # @!attribute [rw] bucket_size
-        #   @return [Float]
-        #     Required. Size of each bucket (except for minimum and maximum buckets). So if
-        #     `lower_bound` = 10, `upper_bound` = 89, and `bucket_size` = 10, then the
-        #     following buckets would be used: -10, 10-20, 20-30, 30-40, 40-50, 50-60,
-        #     60-70, 70-80, 80-89, 89+. Precision up to 2 decimals works.
-        class FixedSizeBucketingConfig; end
-
-        # Generalization function that buckets values based on ranges. The ranges and
-        # replacement values are dynamically provided by the user for custom behavior,
-        # such as 1-30 -> LOW 31-65 -> MEDIUM 66-100 -> HIGH
-        # This can be used on
-        # data of type: number, long, string, timestamp.
-        # If the bound `Value` type differs from the type of data being transformed, we
-        # will first attempt converting the type of the data to be transformed to match
-        # the type of the bound before comparing.
-        # See https://cloud.google.com/dlp/docs/concepts-bucketing to learn more.
-        # @!attribute [rw] buckets
-        #   @return [Array<Google::Privacy::Dlp::V2::BucketingConfig::Bucket>]
-        #     Set of buckets. Ranges must be non-overlapping.
-        class BucketingConfig
-          # Bucket is represented as a range, along with replacement values.
-          # @!attribute [rw] min
-          #   @return [Google::Privacy::Dlp::V2::Value]
-          #     Lower bound of the range, inclusive. Type should be the same as max if
-          #     used.
-          # @!attribute [rw] max
-          #   @return [Google::Privacy::Dlp::V2::Value]
-          #     Upper bound of the range, exclusive; type must match min.
-          # @!attribute [rw] replacement_value
-          #   @return [Google::Privacy::Dlp::V2::Value]
-          #     Replacement value for this bucket. If not provided
-          #     the default behavior will be to hyphenate the min-max range.
-          class Bucket; end
-        end
-
-        # Replaces an identifier with a surrogate using Format Preserving Encryption
-        # (FPE) with the FFX mode of operation; however when used in the
-        # `ReidentifyContent` API method, it serves the opposite function by reversing
-        # the surrogate back into the original identifier. The identifier must be
-        # encoded as ASCII. For a given crypto key and context, the same identifier
-        # will be replaced with the same surrogate. Identifiers must be at least two
-        # characters long. In the case that the identifier is the empty string, it will
-        # be skipped. See https://cloud.google.com/dlp/docs/pseudonymization to learn
-        # more.
-        #
-        # Note: We recommend using  CryptoDeterministicConfig for all use cases which
-        # do not require preserving the input alphabet space and size, plus warrant
-        # referential integrity.
-        # @!attribute [rw] crypto_key
-        #   @return [Google::Privacy::Dlp::V2::CryptoKey]
-        #     Required. The key used by the encryption algorithm.
-        # @!attribute [rw] context
-        #   @return [Google::Privacy::Dlp::V2::FieldId]
-        #     The 'tweak', a context may be used for higher security since the same
-        #     identifier in two different contexts won't be given the same surrogate. If
-        #     the context is not set, a default tweak will be used.
-        #
-        #     If the context is set but:
-        #
-        #     1. there is no record present when transforming a given value or
-        #     1. the field is not present when transforming a given value,
-        #
-        #     a default tweak will be used.
-        #
-        #     Note that case (1) is expected when an `InfoTypeTransformation` is
-        #     applied to both structured and non-structured `ContentItem`s.
-        #     Currently, the referenced field may be of value type integer or string.
-        #
-        #     The tweak is constructed as a sequence of bytes in big endian byte order
-        #     such that:
-        #
-        #     * a 64 bit integer is encoded followed by a single byte of value 1
-        #     * a string is encoded in UTF-8 format followed by a single byte of value 2
-        # @!attribute [rw] common_alphabet
-        #   @return [Google::Privacy::Dlp::V2::CryptoReplaceFfxFpeConfig::FfxCommonNativeAlphabet]
-        #     Common alphabets.
-        # @!attribute [rw] custom_alphabet
-        #   @return [String]
-        #     This is supported by mapping these to the alphanumeric characters
-        #     that the FFX mode natively supports. This happens before/after
-        #     encryption/decryption.
-        #     Each character listed must appear only once.
-        #     Number of characters must be in the range [2, 95].
-        #     This must be encoded as ASCII.
-        #     The order of characters does not matter.
-        # @!attribute [rw] radix
-        #   @return [Integer]
-        #     The native way to select the alphabet. Must be in the range [2, 95].
-        # @!attribute [rw] surrogate_info_type
-        #   @return [Google::Privacy::Dlp::V2::InfoType]
-        #     The custom infoType to annotate the surrogate with.
-        #     This annotation will be applied to the surrogate by prefixing it with
-        #     the name of the custom infoType followed by the number of
-        #     characters comprising the surrogate. The following scheme defines the
-        #     format: info_type_name(surrogate_character_count):surrogate
-        #
-        #     For example, if the name of custom infoType is 'MY_TOKEN_INFO_TYPE' and
-        #     the surrogate is 'abc', the full replacement value
-        #     will be: 'MY_TOKEN_INFO_TYPE(3):abc'
-        #
-        #     This annotation identifies the surrogate when inspecting content using the
-        #     custom infoType
-        #     [`SurrogateType`](https://cloud.google.com/dlp/docs/reference/rest/v2/InspectConfig#surrogatetype).
-        #     This facilitates reversal of the surrogate when it occurs in free text.
-        #
-        #     In order for inspection to work properly, the name of this infoType must
-        #     not occur naturally anywhere in your data; otherwise, inspection may
-        #     find a surrogate that does not correspond to an actual identifier.
-        #     Therefore, choose your custom infoType name carefully after considering
-        #     what your data looks like. One way to select a name that has a high chance
-        #     of yielding reliable detection is to include one or more unicode characters
-        #     that are highly improbable to exist in your data.
-        #     For example, assuming your data is entered from a regular ASCII keyboard,
-        #     the symbol with the hex code point 29DD might be used like so:
-        #     ⧝MY_TOKEN_TYPE
-        class CryptoReplaceFfxFpeConfig
-          # These are commonly used subsets of the alphabet that the FFX mode
-          # natively supports. In the algorithm, the alphabet is selected using
-          # the "radix". Therefore each corresponds to particular radix.
-          module FfxCommonNativeAlphabet
-            # Unused.
-            FFX_COMMON_NATIVE_ALPHABET_UNSPECIFIED = 0
-
-            # [0-9] (radix of 10)
-            NUMERIC = 1
-
-            # [0-9A-F] (radix of 16)
-            HEXADECIMAL = 2
-
-            # [0-9A-Z] (radix of 36)
-            UPPER_CASE_ALPHA_NUMERIC = 3
-
-            # [0-9A-Za-z] (radix of 62)
-            ALPHA_NUMERIC = 4
-          end
-        end
-
-        # This is a data encryption key (DEK) (as opposed to
-        # a key encryption key (KEK) stored by KMS).
-        # When using KMS to wrap/unwrap DEKs, be sure to set an appropriate
-        # IAM policy on the KMS CryptoKey (KEK) to ensure an attacker cannot
-        # unwrap the data crypto key.
-        # @!attribute [rw] transient
-        #   @return [Google::Privacy::Dlp::V2::TransientCryptoKey]
-        #     Transient crypto key
-        # @!attribute [rw] unwrapped
-        #   @return [Google::Privacy::Dlp::V2::UnwrappedCryptoKey]
-        #     Unwrapped crypto key
-        # @!attribute [rw] kms_wrapped
-        #   @return [Google::Privacy::Dlp::V2::KmsWrappedCryptoKey]
-        #     Kms wrapped key
-        class CryptoKey; end
-
-        # Use this to have a random data crypto key generated.
-        # It will be discarded after the request finishes.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Name of the key.
-        #     This is an arbitrary string used to differentiate different keys.
-        #     A unique key is generated per name: two separate `TransientCryptoKey`
-        #     protos share the same generated key if their names are the same.
-        #     When the data crypto key is generated, this name is not used in any way
-        #     (repeating the api call will result in a different key being generated).
-        class TransientCryptoKey; end
-
-        # Using raw keys is prone to security risks due to accidentally
-        # leaking the key. Choose another type of key if possible.
-        # @!attribute [rw] key
-        #   @return [String]
-        #     Required. A 128/192/256 bit key.
-        class UnwrappedCryptoKey; end
-
-        # Include to use an existing data crypto key wrapped by KMS.
-        # The wrapped key must be a 128/192/256 bit key.
-        # Authorization requires the following IAM permissions when sending a request
-        # to perform a crypto transformation using a kms-wrapped crypto key:
-        # dlp.kms.encrypt
-        # @!attribute [rw] wrapped_key
-        #   @return [String]
-        #     Required. The wrapped data crypto key.
-        # @!attribute [rw] crypto_key_name
-        #   @return [String]
-        #     Required. The resource name of the KMS CryptoKey to use for unwrapping.
-        class KmsWrappedCryptoKey; end
-
-        # Shifts dates by random number of days, with option to be consistent for the
-        # same context. See https://cloud.google.com/dlp/docs/concepts-date-shifting
-        # to learn more.
-        # @!attribute [rw] upper_bound_days
-        #   @return [Integer]
-        #     Required. Range of shift in days. Actual shift will be selected at random within this
-        #     range (inclusive ends). Negative means shift to earlier in time. Must not
-        #     be more than 365250 days (1000 years) each direction.
-        #
-        #     For example, 3 means shift date to at most 3 days into the future.
-        # @!attribute [rw] lower_bound_days
-        #   @return [Integer]
-        #     Required. For example, -5 means shift date to at most 5 days back in the past.
-        # @!attribute [rw] context
-        #   @return [Google::Privacy::Dlp::V2::FieldId]
-        #     Points to the field that contains the context, for example, an entity id.
-        #     If set, must also set cryptoKey. If set, shift will be consistent for the
-        #     given context.
-        # @!attribute [rw] crypto_key
-        #   @return [Google::Privacy::Dlp::V2::CryptoKey]
-        #     Causes the shift to be computed based on this key and the context. This
-        #     results in the same shift for the same context and crypto_key. If
-        #     set, must also set context. Can only be applied to table items.
-        class DateShiftConfig; end
-
-        # A type of transformation that will scan unstructured text and
-        # apply various `PrimitiveTransformation`s to each finding, where the
-        # transformation is applied to only values that were identified as a specific
-        # info_type.
-        # @!attribute [rw] transformations
-        #   @return [Array<Google::Privacy::Dlp::V2::InfoTypeTransformations::InfoTypeTransformation>]
-        #     Required. Transformation for each infoType. Cannot specify more than one
-        #     for a given infoType.
-        class InfoTypeTransformations
-          # A transformation to apply to text that is identified as a specific
-          # info_type.
-          # @!attribute [rw] info_types
-          #   @return [Array<Google::Privacy::Dlp::V2::InfoType>]
-          #     InfoTypes to apply the transformation to. An empty list will cause
-          #     this transformation to apply to all findings that correspond to
-          #     infoTypes that were requested in `InspectConfig`.
-          # @!attribute [rw] primitive_transformation
-          #   @return [Google::Privacy::Dlp::V2::PrimitiveTransformation]
-          #     Required. Primitive transformation to apply to the infoType.
-          class InfoTypeTransformation; end
-        end
-
-        # The transformation to apply to the field.
-        # @!attribute [rw] fields
-        #   @return [Array<Google::Privacy::Dlp::V2::FieldId>]
-        #     Required. Input field(s) to apply the transformation to.
-        # @!attribute [rw] condition
-        #   @return [Google::Privacy::Dlp::V2::RecordCondition]
-        #     Only apply the transformation if the condition evaluates to true for the
-        #     given `RecordCondition`. The conditions are allowed to reference fields
-        #     that are not used in the actual transformation.
-        #
-        #     Example Use Cases:
-        #
-        #     * Apply a different bucket transformation to an age column if the zip code
-        #       column for the same record is within a specific range.
-        #     * Redact a field if the date of birth field is greater than 85.
-        # @!attribute [rw] primitive_transformation
-        #   @return [Google::Privacy::Dlp::V2::PrimitiveTransformation]
-        #     Apply the transformation to the entire field.
-        # @!attribute [rw] info_type_transformations
-        #   @return [Google::Privacy::Dlp::V2::InfoTypeTransformations]
-        #     Treat the contents of the field as free text, and selectively
-        #     transform content that matches an `InfoType`.
-        class FieldTransformation; end
-
-        # A type of transformation that is applied over structured data such as a
-        # table.
-        # @!attribute [rw] field_transformations
-        #   @return [Array<Google::Privacy::Dlp::V2::FieldTransformation>]
-        #     Transform the record by applying various field transformations.
-        # @!attribute [rw] record_suppressions
-        #   @return [Array<Google::Privacy::Dlp::V2::RecordSuppression>]
-        #     Configuration defining which records get suppressed entirely. Records that
-        #     match any suppression rule are omitted from the output.
-        class RecordTransformations; end
-
-        # Configuration to suppress records whose suppression conditions evaluate to
-        # true.
-        # @!attribute [rw] condition
-        #   @return [Google::Privacy::Dlp::V2::RecordCondition]
-        #     A condition that when it evaluates to true will result in the record being
-        #     evaluated to be suppressed from the transformed content.
-        class RecordSuppression; end
-
-        # A condition for determining whether a transformation should be applied to
-        # a field.
-        # @!attribute [rw] expressions
-        #   @return [Google::Privacy::Dlp::V2::RecordCondition::Expressions]
-        #     An expression.
-        class RecordCondition
-          # The field type of `value` and `field` do not need to match to be
-          # considered equal, but not all comparisons are possible.
-          # EQUAL_TO and NOT_EQUAL_TO attempt to compare even with incompatible types,
-          # but all other comparisons are invalid with incompatible types.
-          # A `value` of type:
-          #
-          # * `string` can be compared against all other types
-          # * `boolean` can only be compared against other booleans
-          # * `integer` can be compared against doubles or a string if the string value
-          #   can be parsed as an integer.
-          # * `double` can be compared against integers or a string if the string can
-          #   be parsed as a double.
-          # * `Timestamp` can be compared against strings in RFC 3339 date string
-          #   format.
-          # * `TimeOfDay` can be compared against timestamps and strings in the format
-          #   of 'HH:mm:ss'.
-          #
-          # If we fail to compare do to type mismatch, a warning will be given and
-          # the condition will evaluate to false.
-          # @!attribute [rw] field
-          #   @return [Google::Privacy::Dlp::V2::FieldId]
-          #     Required. Field within the record this condition is evaluated against.
-          # @!attribute [rw] operator
-          #   @return [Google::Privacy::Dlp::V2::RelationalOperator]
-          #     Required. Operator used to compare the field or infoType to the value.
-          # @!attribute [rw] value
-          #   @return [Google::Privacy::Dlp::V2::Value]
-          #     Value to compare against. [Mandatory, except for `EXISTS` tests.]
-          class Condition; end
-
-          # A collection of conditions.
-          # @!attribute [rw] conditions
-          #   @return [Array<Google::Privacy::Dlp::V2::RecordCondition::Condition>]
-          #     A collection of conditions.
-          class Conditions; end
-
-          # An expression, consisting or an operator and conditions.
-          # @!attribute [rw] logical_operator
-          #   @return [Google::Privacy::Dlp::V2::RecordCondition::Expressions::LogicalOperator]
-          #     The operator to apply to the result of conditions. Default and currently
-          #     only supported value is `AND`.
-          # @!attribute [rw] conditions
-          #   @return [Google::Privacy::Dlp::V2::RecordCondition::Conditions]
-          #     Conditions to apply to the expression.
-          class Expressions
-            # Logical operators for conditional checks.
-            module LogicalOperator
-              # Unused
-              LOGICAL_OPERATOR_UNSPECIFIED = 0
-
-              # Conditional AND
-              AND = 1
-            end
-          end
-        end
-
-        # Overview of the modifications that occurred.
-        # @!attribute [rw] transformed_bytes
-        #   @return [Integer]
-        #     Total size in bytes that were transformed in some way.
-        # @!attribute [rw] transformation_summaries
-        #   @return [Array<Google::Privacy::Dlp::V2::TransformationSummary>]
-        #     Transformations applied to the dataset.
-        class TransformationOverview; end
-
-        # Summary of a single transformation.
-        # Only one of 'transformation', 'field_transformation', or 'record_suppress'
-        # will be set.
-        # @!attribute [rw] info_type
-        #   @return [Google::Privacy::Dlp::V2::InfoType]
-        #     Set if the transformation was limited to a specific InfoType.
-        # @!attribute [rw] field
-        #   @return [Google::Privacy::Dlp::V2::FieldId]
-        #     Set if the transformation was limited to a specific FieldId.
-        # @!attribute [rw] transformation
-        #   @return [Google::Privacy::Dlp::V2::PrimitiveTransformation]
-        #     The specific transformation these stats apply to.
-        # @!attribute [rw] field_transformations
-        #   @return [Array<Google::Privacy::Dlp::V2::FieldTransformation>]
-        #     The field transformation that was applied.
-        #     If multiple field transformations are requested for a single field,
-        #     this list will contain all of them; otherwise, only one is supplied.
-        # @!attribute [rw] record_suppress
-        #   @return [Google::Privacy::Dlp::V2::RecordSuppression]
-        #     The specific suppression option these stats apply to.
-        # @!attribute [rw] results
-        #   @return [Array<Google::Privacy::Dlp::V2::TransformationSummary::SummaryResult>]
-        #     Collection of all transformations that took place or had an error.
-        # @!attribute [rw] transformed_bytes
-        #   @return [Integer]
-        #     Total size in bytes that were transformed in some way.
-        class TransformationSummary
-          # A collection that informs the user the number of times a particular
-          # `TransformationResultCode` and error details occurred.
-          # @!attribute [rw] count
-          #   @return [Integer]
-          #     Number of transformations counted by this result.
-          # @!attribute [rw] code
-          #   @return [Google::Privacy::Dlp::V2::TransformationSummary::TransformationResultCode]
-          #     Outcome of the transformation.
-          # @!attribute [rw] details
-          #   @return [String]
-          #     A place for warnings or errors to show up if a transformation didn't
-          #     work as expected.
-          class SummaryResult; end
-
-          # Possible outcomes of transformations.
-          module TransformationResultCode
-            # Unused
-            TRANSFORMATION_RESULT_CODE_UNSPECIFIED = 0
-
-            # Transformation completed without an error.
-            SUCCESS = 1
-
-            # Transformation had an error.
-            ERROR = 2
-          end
-        end
-
-        # Schedule for triggeredJobs.
-        # @!attribute [rw] recurrence_period_duration
-        #   @return [Google::Protobuf::Duration]
-        #     With this option a job is started a regular periodic basis. For
-        #     example: every day (86400 seconds).
-        #
-        #     A scheduled start time will be skipped if the previous
-        #     execution has not ended when its scheduled time occurs.
-        #
-        #     This value must be set to a time duration greater than or equal
-        #     to 1 day and can be no longer than 60 days.
-        class Schedule; end
-
-        # The inspectTemplate contains a configuration (set of types of sensitive data
-        # to be detected) to be used anywhere you otherwise would normally specify
-        # InspectConfig. See https://cloud.google.com/dlp/docs/concepts-templates
-        # to learn more.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Output only. The template name.
-        #
-        #     The template will have one of the following formats:
-        #     `projects/PROJECT_ID/inspectTemplates/TEMPLATE_ID` OR
-        #     `organizations/ORGANIZATION_ID/inspectTemplates/TEMPLATE_ID`;
-        # @!attribute [rw] display_name
-        #   @return [String]
-        #     Display name (max 256 chars).
-        # @!attribute [rw] description
-        #   @return [String]
-        #     Short description (max 256 chars).
-        # @!attribute [rw] create_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Output only. The creation timestamp of an inspectTemplate.
-        # @!attribute [rw] update_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Output only. The last update timestamp of an inspectTemplate.
-        # @!attribute [rw] inspect_config
-        #   @return [Google::Privacy::Dlp::V2::InspectConfig]
-        #     The core content of the template. Configuration of the scanning process.
-        class InspectTemplate; end
-
-        # DeidentifyTemplates contains instructions on how to de-identify content.
-        # See https://cloud.google.com/dlp/docs/concepts-templates to learn more.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Output only. The template name.
-        #
-        #     The template will have one of the following formats:
-        #     `projects/PROJECT_ID/deidentifyTemplates/TEMPLATE_ID` OR
-        #     `organizations/ORGANIZATION_ID/deidentifyTemplates/TEMPLATE_ID`
-        # @!attribute [rw] display_name
-        #   @return [String]
-        #     Display name (max 256 chars).
-        # @!attribute [rw] description
-        #   @return [String]
-        #     Short description (max 256 chars).
-        # @!attribute [rw] create_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Output only. The creation timestamp of an inspectTemplate.
-        # @!attribute [rw] update_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Output only. The last update timestamp of an inspectTemplate.
-        # @!attribute [rw] deidentify_config
-        #   @return [Google::Privacy::Dlp::V2::DeidentifyConfig]
-        #     ///////////// // The core content of the template  // ///////////////
-        class DeidentifyTemplate; end
-
-        # Details information about an error encountered during job execution or
-        # the results of an unsuccessful activation of the JobTrigger.
-        # @!attribute [rw] details
-        #   @return [Google::Rpc::Status]
-        #     Detailed error codes and messages.
-        # @!attribute [rw] timestamps
-        #   @return [Array<Google::Protobuf::Timestamp>]
-        #     The times the error occurred.
-        class Error; end
-
-        # Contains a configuration to make dlp api calls on a repeating basis.
-        # See https://cloud.google.com/dlp/docs/concepts-job-triggers to learn more.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Unique resource name for the triggeredJob, assigned by the service when the
-        #     triggeredJob is created, for example
-        #     `projects/dlp-test-project/jobTriggers/53234423`.
-        # @!attribute [rw] display_name
-        #   @return [String]
-        #     Display name (max 100 chars)
-        # @!attribute [rw] description
-        #   @return [String]
-        #     User provided description (max 256 chars)
-        # @!attribute [rw] inspect_job
-        #   @return [Google::Privacy::Dlp::V2::InspectJobConfig]
-        #     For inspect jobs, a snapshot of the configuration.
-        # @!attribute [rw] triggers
-        #   @return [Array<Google::Privacy::Dlp::V2::JobTrigger::Trigger>]
-        #     A list of triggers which will be OR'ed together. Only one in the list
-        #     needs to trigger for a job to be started. The list may contain only
-        #     a single Schedule trigger and must have at least one object.
-        # @!attribute [rw] errors
-        #   @return [Array<Google::Privacy::Dlp::V2::Error>]
-        #     Output only. A stream of errors encountered when the trigger was activated. Repeated
-        #     errors may result in the JobTrigger automatically being paused.
-        #     Will return the last 100 errors. Whenever the JobTrigger is modified
-        #     this list will be cleared.
-        # @!attribute [rw] create_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Output only. The creation timestamp of a triggeredJob.
-        # @!attribute [rw] update_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Output only. The last update timestamp of a triggeredJob.
-        # @!attribute [rw] last_run_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Output only. The timestamp of the last time this trigger executed.
-        # @!attribute [rw] status
-        #   @return [Google::Privacy::Dlp::V2::JobTrigger::Status]
-        #     Required. A status for this trigger.
-        class JobTrigger
-          # What event needs to occur for a new job to be started.
-          # @!attribute [rw] schedule
-          #   @return [Google::Privacy::Dlp::V2::Schedule]
-          #     Create a job on a repeating basis based on the elapse of time.
-          class Trigger; end
-
-          # Whether the trigger is currently active. If PAUSED or CANCELLED, no jobs
-          # will be created with this configuration. The service may automatically
-          # pause triggers experiencing frequent errors. To restart a job, set the
-          # status to HEALTHY after correcting user errors.
-          module Status
-            # Unused.
-            STATUS_UNSPECIFIED = 0
-
-            # Trigger is healthy.
-            HEALTHY = 1
-
-            # Trigger is temporarily paused.
-            PAUSED = 2
-
-            # Trigger is cancelled and can not be resumed.
-            CANCELLED = 3
-          end
-        end
-
-        # A task to execute on the completion of a job.
-        # See https://cloud.google.com/dlp/docs/concepts-actions to learn more.
-        # @!attribute [rw] save_findings
-        #   @return [Google::Privacy::Dlp::V2::Action::SaveFindings]
-        #     Save resulting findings in a provided location.
-        # @!attribute [rw] pub_sub
-        #   @return [Google::Privacy::Dlp::V2::Action::PublishToPubSub]
-        #     Publish a notification to a pubsub topic.
-        # @!attribute [rw] publish_summary_to_cscc
-        #   @return [Google::Privacy::Dlp::V2::Action::PublishSummaryToCscc]
-        #     Publish summary to Cloud Security Command Center (Alpha).
-        # @!attribute [rw] publish_findings_to_cloud_data_catalog
-        #   @return [Google::Privacy::Dlp::V2::Action::PublishFindingsToCloudDataCatalog]
-        #     Publish findings to Cloud Datahub.
-        # @!attribute [rw] job_notification_emails
-        #   @return [Google::Privacy::Dlp::V2::Action::JobNotificationEmails]
-        #     Enable email notification for project owners and editors on job's
-        #     completion/failure.
-        # @!attribute [rw] publish_to_stackdriver
-        #   @return [Google::Privacy::Dlp::V2::Action::PublishToStackdriver]
-        #     Enable Stackdriver metric dlp.googleapis.com/finding_count.
-        class Action
-          # If set, the detailed findings will be persisted to the specified
-          # OutputStorageConfig. Only a single instance of this action can be
-          # specified.
-          # Compatible with: Inspect, Risk
-          # @!attribute [rw] output_config
-          #   @return [Google::Privacy::Dlp::V2::OutputStorageConfig]
-          #     Location to store findings outside of DLP.
-          class SaveFindings; end
-
-          # Publish a message into given Pub/Sub topic when DlpJob has completed. The
-          # message contains a single field, `DlpJobName`, which is equal to the
-          # finished job's
-          # [`DlpJob.name`](https://cloud.google.com/dlp/docs/reference/rest/v2/projects.dlpJobs#DlpJob).
-          # Compatible with: Inspect, Risk
-          # @!attribute [rw] topic
-          #   @return [String]
-          #     Cloud Pub/Sub topic to send notifications to. The topic must have given
-          #     publishing access rights to the DLP API service account executing
-          #     the long running DlpJob sending the notifications.
-          #     Format is projects/\\{project}/topics/\\{topic}.
-          class PublishToPubSub; end
-
-          # Publish the result summary of a DlpJob to the Cloud Security
-          # Command Center (CSCC Alpha).
-          # This action is only available for projects which are parts of
-          # an organization and whitelisted for the alpha Cloud Security Command
-          # Center.
-          # The action will publish count of finding instances and their info types.
-          # The summary of findings will be persisted in CSCC and are governed by CSCC
-          # service-specific policy, see https://cloud.google.com/terms/service-terms
-          # Only a single instance of this action can be specified.
-          # Compatible with: Inspect
-          class PublishSummaryToCscc; end
-
-          # Publish findings of a DlpJob to Cloud Data Catalog. Labels summarizing the
-          # results of the DlpJob will be applied to the entry for the resource scanned
-          # in Cloud Data Catalog. Any labels previously written by another DlpJob will
-          # be deleted. InfoType naming patterns are strictly enforced when using this
-          # feature. Note that the findings will be persisted in Cloud Data Catalog
-          # storage and are governed by Data Catalog service-specific policy, see
-          # https://cloud.google.com/terms/service-terms
-          # Only a single instance of this action can be specified and only allowed if
-          # all resources being scanned are BigQuery tables.
-          # Compatible with: Inspect
-          class PublishFindingsToCloudDataCatalog; end
-
-          # Enable email notification to project owners and editors on jobs's
-          # completion/failure.
-          class JobNotificationEmails; end
-
-          # Enable Stackdriver metric dlp.googleapis.com/finding_count. This
-          # will publish a metric to stack driver on each infotype requested and
-          # how many findings were found for it. CustomDetectors will be bucketed
-          # as 'Custom' under the Stackdriver label 'info_type'.
-          class PublishToStackdriver; end
-        end
-
-        # Request message for CreateInspectTemplate.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. The parent resource name, for example projects/my-project-id or
-        #     organizations/my-org-id.
-        # @!attribute [rw] inspect_template
-        #   @return [Google::Privacy::Dlp::V2::InspectTemplate]
-        #     Required. The InspectTemplate to create.
-        # @!attribute [rw] template_id
-        #   @return [String]
-        #     The template id can contain uppercase and lowercase letters,
-        #     numbers, and hyphens; that is, it must match the regular
-        #     expression: `[a-zA-Z\\d-_]+`. The maximum length is 100
-        #     characters. Can be empty to allow the system to generate one.
-        # @!attribute [rw] location_id
-        #   @return [String]
-        #     The geographic location to store the inspection template. Reserved for
-        #     future extensions.
-        class CreateInspectTemplateRequest; end
-
-        # Request message for UpdateInspectTemplate.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Resource name of organization and inspectTemplate to be updated, for
-        #     example `organizations/433245324/inspectTemplates/432452342` or
-        #     projects/project-id/inspectTemplates/432452342.
-        # @!attribute [rw] inspect_template
-        #   @return [Google::Privacy::Dlp::V2::InspectTemplate]
-        #     New InspectTemplate value.
-        # @!attribute [rw] update_mask
-        #   @return [Google::Protobuf::FieldMask]
-        #     Mask to control which fields get updated.
-        class UpdateInspectTemplateRequest; end
-
-        # Request message for GetInspectTemplate.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Resource name of the organization and inspectTemplate to be read, for
-        #     example `organizations/433245324/inspectTemplates/432452342` or
-        #     projects/project-id/inspectTemplates/432452342.
-        class GetInspectTemplateRequest; end
-
-        # Request message for ListInspectTemplates.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. The parent resource name, for example projects/my-project-id or
-        #     organizations/my-org-id.
-        # @!attribute [rw] page_token
-        #   @return [String]
-        #     Page token to continue retrieval. Comes from previous call
-        #     to `ListInspectTemplates`.
-        # @!attribute [rw] page_size
-        #   @return [Integer]
-        #     Size of the page, can be limited by server. If zero server returns
-        #     a page of max size 100.
-        # @!attribute [rw] order_by
-        #   @return [String]
-        #     Comma separated list of fields to order by,
-        #     followed by `asc` or `desc` postfix. This list is case-insensitive,
-        #     default sorting order is ascending, redundant space characters are
-        #     insignificant.
-        #
-        #     Example: `name asc,update_time, create_time desc`
-        #
-        #     Supported fields are:
-        #
-        #     * `create_time`: corresponds to time the template was created.
-        #     * `update_time`: corresponds to time the template was last updated.
-        #     * `name`: corresponds to template's name.
-        #     * `display_name`: corresponds to template's display name.
-        # @!attribute [rw] location_id
-        #   @return [String]
-        #     The geographic location where inspection templates will be retrieved from.
-        #     Use `-` for all locations. Reserved for future extensions.
-        class ListInspectTemplatesRequest; end
-
-        # Response message for ListInspectTemplates.
-        # @!attribute [rw] inspect_templates
-        #   @return [Array<Google::Privacy::Dlp::V2::InspectTemplate>]
-        #     List of inspectTemplates, up to page_size in ListInspectTemplatesRequest.
-        # @!attribute [rw] next_page_token
-        #   @return [String]
-        #     If the next page is available then the next page token to be used
-        #     in following ListInspectTemplates request.
-        class ListInspectTemplatesResponse; end
-
-        # Request message for DeleteInspectTemplate.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Resource name of the organization and inspectTemplate to be deleted, for
-        #     example `organizations/433245324/inspectTemplates/432452342` or
-        #     projects/project-id/inspectTemplates/432452342.
-        class DeleteInspectTemplateRequest; end
-
-        # Request message for CreateJobTrigger.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. The parent resource name, for example projects/my-project-id.
-        # @!attribute [rw] job_trigger
-        #   @return [Google::Privacy::Dlp::V2::JobTrigger]
-        #     Required. The JobTrigger to create.
-        # @!attribute [rw] trigger_id
-        #   @return [String]
-        #     The trigger id can contain uppercase and lowercase letters,
-        #     numbers, and hyphens; that is, it must match the regular
-        #     expression: `[a-zA-Z\\d-_]+`. The maximum length is 100
-        #     characters. Can be empty to allow the system to generate one.
-        # @!attribute [rw] location_id
-        #   @return [String]
-        #     The geographic location to store the job trigger. Reserved for
-        #     future extensions.
-        class CreateJobTriggerRequest; end
-
-        # Request message for ActivateJobTrigger.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Resource name of the trigger to activate, for example
-        #     `projects/dlp-test-project/jobTriggers/53234423`.
-        class ActivateJobTriggerRequest; end
-
-        # Request message for UpdateJobTrigger.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Resource name of the project and the triggeredJob, for example
-        #     `projects/dlp-test-project/jobTriggers/53234423`.
-        # @!attribute [rw] job_trigger
-        #   @return [Google::Privacy::Dlp::V2::JobTrigger]
-        #     New JobTrigger value.
-        # @!attribute [rw] update_mask
-        #   @return [Google::Protobuf::FieldMask]
-        #     Mask to control which fields get updated.
-        class UpdateJobTriggerRequest; end
-
-        # Request message for GetJobTrigger.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Resource name of the project and the triggeredJob, for example
-        #     `projects/dlp-test-project/jobTriggers/53234423`.
-        class GetJobTriggerRequest; end
-
-        # Request message for CreateDlpJobRequest. Used to initiate long running
-        # jobs such as calculating risk metrics or inspecting Google Cloud
-        # Storage.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. The parent resource name, for example projects/my-project-id.
-        # @!attribute [rw] inspect_job
-        #   @return [Google::Privacy::Dlp::V2::InspectJobConfig]
-        #     Set to control what and how to inspect.
-        # @!attribute [rw] risk_job
-        #   @return [Google::Privacy::Dlp::V2::RiskAnalysisJobConfig]
-        #     Set to choose what metric to calculate.
-        # @!attribute [rw] job_id
-        #   @return [String]
-        #     The job id can contain uppercase and lowercase letters,
-        #     numbers, and hyphens; that is, it must match the regular
-        #     expression: `[a-zA-Z\\d-_]+`. The maximum length is 100
-        #     characters. Can be empty to allow the system to generate one.
-        # @!attribute [rw] location_id
-        #   @return [String]
-        #     The geographic location to store and process the job. Reserved for
-        #     future extensions.
-        class CreateDlpJobRequest; end
-
-        # Request message for ListJobTriggers.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. The parent resource name, for example `projects/my-project-id`.
-        # @!attribute [rw] page_token
-        #   @return [String]
-        #     Page token to continue retrieval. Comes from previous call
-        #     to ListJobTriggers. `order_by` field must not
-        #     change for subsequent calls.
-        # @!attribute [rw] page_size
-        #   @return [Integer]
-        #     Size of the page, can be limited by a server.
-        # @!attribute [rw] order_by
-        #   @return [String]
-        #     Comma separated list of triggeredJob fields to order by,
-        #     followed by `asc` or `desc` postfix. This list is case-insensitive,
-        #     default sorting order is ascending, redundant space characters are
-        #     insignificant.
-        #
-        #     Example: `name asc,update_time, create_time desc`
-        #
-        #     Supported fields are:
-        #
-        #     * `create_time`: corresponds to time the JobTrigger was created.
-        #     * `update_time`: corresponds to time the JobTrigger was last updated.
-        #     * `last_run_time`: corresponds to the last time the JobTrigger ran.
-        #     * `name`: corresponds to JobTrigger's name.
-        #     * `display_name`: corresponds to JobTrigger's display name.
-        #     * `status`: corresponds to JobTrigger's status.
-        # @!attribute [rw] filter
-        #   @return [String]
-        #     Allows filtering.
-        #
-        #     Supported syntax:
-        #
-        #     * Filter expressions are made up of one or more restrictions.
-        #     * Restrictions can be combined by `AND` or `OR` logical operators. A
-        #       sequence of restrictions implicitly uses `AND`.
-        #     * A restriction has the form of `{field} {operator} {value}`.
-        #     * Supported fields/values for inspect jobs:
-        #       * `status` - HEALTHY|PAUSED|CANCELLED
-        #         * `inspected_storage` - DATASTORE|CLOUD_STORAGE|BIGQUERY
-        #         * 'last_run_time` - RFC 3339 formatted timestamp, surrounded by
-        #           quotation marks. Nanoseconds are ignored.
-        #         * 'error_count' - Number of errors that have occurred while running.
-        #       * The operator must be `=` or `!=` for status and inspected_storage.
-        #
-        #       Examples:
-        #
-        #     * inspected_storage = cloud_storage AND status = HEALTHY
-        #     * inspected_storage = cloud_storage OR inspected_storage = bigquery
-        #     * inspected_storage = cloud_storage AND (state = PAUSED OR state = HEALTHY)
-        #     * last_run_time > \"2017-12-12T00:00:00+00:00\"
-        #
-        #     The length of this field should be no more than 500 characters.
-        # @!attribute [rw] location_id
-        #   @return [String]
-        #     The geographic location where job triggers will be retrieved from.
-        #     Use `-` for all locations. Reserved for future extensions.
-        class ListJobTriggersRequest; end
-
-        # Response message for ListJobTriggers.
-        # @!attribute [rw] job_triggers
-        #   @return [Array<Google::Privacy::Dlp::V2::JobTrigger>]
-        #     List of triggeredJobs, up to page_size in ListJobTriggersRequest.
-        # @!attribute [rw] next_page_token
-        #   @return [String]
-        #     If the next page is available then the next page token to be used
-        #     in following ListJobTriggers request.
-        class ListJobTriggersResponse; end
-
-        # Request message for DeleteJobTrigger.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Resource name of the project and the triggeredJob, for example
-        #     `projects/dlp-test-project/jobTriggers/53234423`.
-        class DeleteJobTriggerRequest; end
-
-        # Controls what and how to inspect for findings.
-        # @!attribute [rw] storage_config
-        #   @return [Google::Privacy::Dlp::V2::StorageConfig]
-        #     The data to scan.
-        # @!attribute [rw] inspect_config
-        #   @return [Google::Privacy::Dlp::V2::InspectConfig]
-        #     How and what to scan for.
-        # @!attribute [rw] inspect_template_name
-        #   @return [String]
-        #     If provided, will be used as the default for all values in InspectConfig.
-        #     `inspect_config` will be merged into the values persisted as part of the
-        #     template.
-        # @!attribute [rw] actions
-        #   @return [Array<Google::Privacy::Dlp::V2::Action>]
-        #     Actions to execute at the completion of the job.
-        class InspectJobConfig; end
-
-        # Combines all of the information about a DLP job.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     The server-assigned name.
-        # @!attribute [rw] type
-        #   @return [Google::Privacy::Dlp::V2::DlpJobType]
-        #     The type of job.
-        # @!attribute [rw] state
-        #   @return [Google::Privacy::Dlp::V2::DlpJob::JobState]
-        #     State of a job.
-        # @!attribute [rw] risk_details
-        #   @return [Google::Privacy::Dlp::V2::AnalyzeDataSourceRiskDetails]
-        #     Results from analyzing risk of a data source.
-        # @!attribute [rw] inspect_details
-        #   @return [Google::Privacy::Dlp::V2::InspectDataSourceDetails]
-        #     Results from inspecting a data source.
-        # @!attribute [rw] create_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Time when the job was created.
-        # @!attribute [rw] start_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Time when the job started.
-        # @!attribute [rw] end_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Time when the job finished.
-        # @!attribute [rw] job_trigger_name
-        #   @return [String]
-        #     If created by a job trigger, the resource name of the trigger that
-        #     instantiated the job.
-        # @!attribute [rw] errors
-        #   @return [Array<Google::Privacy::Dlp::V2::Error>]
-        #     A stream of errors encountered running the job.
-        class DlpJob
-          # Possible states of a job.
-          module JobState
-            # Unused.
-            JOB_STATE_UNSPECIFIED = 0
-
-            # The job has not yet started.
-            PENDING = 1
-
-            # The job is currently running.
-            RUNNING = 2
-
-            # The job is no longer running.
-            DONE = 3
-
-            # The job was canceled before it could complete.
-            CANCELED = 4
-
-            # The job had an error and did not complete.
-            FAILED = 5
-          end
-        end
-
-        # The request message for {DlpJobs::GetDlpJob}.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. The name of the DlpJob resource.
-        class GetDlpJobRequest; end
-
-        # The request message for listing DLP jobs.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. The parent resource name, for example projects/my-project-id.
-        # @!attribute [rw] filter
-        #   @return [String]
-        #     Allows filtering.
-        #
-        #     Supported syntax:
-        #
-        #     * Filter expressions are made up of one or more restrictions.
-        #     * Restrictions can be combined by `AND` or `OR` logical operators. A
-        #       sequence of restrictions implicitly uses `AND`.
-        #     * A restriction has the form of `{field} {operator} {value}`.
-        #     * Supported fields/values for inspect jobs:
-        #       * `state` - PENDING|RUNNING|CANCELED|FINISHED|FAILED
-        #         * `inspected_storage` - DATASTORE|CLOUD_STORAGE|BIGQUERY
-        #         * `trigger_name` - The resource name of the trigger that created job.
-        #         * 'end_time` - Corresponds to time the job finished.
-        #         * 'start_time` - Corresponds to time the job finished.
-        #       * Supported fields for risk analysis jobs:
-        #         * `state` - RUNNING|CANCELED|FINISHED|FAILED
-        #         * 'end_time` - Corresponds to time the job finished.
-        #         * 'start_time` - Corresponds to time the job finished.
-        #       * The operator must be `=` or `!=`.
-        #
-        #       Examples:
-        #
-        #     * inspected_storage = cloud_storage AND state = done
-        #     * inspected_storage = cloud_storage OR inspected_storage = bigquery
-        #     * inspected_storage = cloud_storage AND (state = done OR state = canceled)
-        #     * end_time > \"2017-12-12T00:00:00+00:00\"
-        #
-        #     The length of this field should be no more than 500 characters.
-        # @!attribute [rw] page_size
-        #   @return [Integer]
-        #     The standard list page size.
-        # @!attribute [rw] page_token
-        #   @return [String]
-        #     The standard list page token.
-        # @!attribute [rw] type
-        #   @return [Google::Privacy::Dlp::V2::DlpJobType]
-        #     The type of job. Defaults to `DlpJobType.INSPECT`
-        # @!attribute [rw] order_by
-        #   @return [String]
-        #     Comma separated list of fields to order by,
-        #     followed by `asc` or `desc` postfix. This list is case-insensitive,
-        #     default sorting order is ascending, redundant space characters are
-        #     insignificant.
-        #
-        #     Example: `name asc, end_time asc, create_time desc`
-        #
-        #     Supported fields are:
-        #
-        #     * `create_time`: corresponds to time the job was created.
-        #     * `end_time`: corresponds to time the job ended.
-        #     * `name`: corresponds to job's name.
-        #     * `state`: corresponds to `state`
-        # @!attribute [rw] location_id
-        #   @return [String]
-        #     The geographic location where jobs will be retrieved from.
-        #     Use `-` for all locations. Reserved for future extensions.
-        class ListDlpJobsRequest; end
-
-        # The response message for listing DLP jobs.
-        # @!attribute [rw] jobs
-        #   @return [Array<Google::Privacy::Dlp::V2::DlpJob>]
-        #     A list of DlpJobs that matches the specified filter in the request.
-        # @!attribute [rw] next_page_token
-        #   @return [String]
-        #     The standard List next-page token.
-        class ListDlpJobsResponse; end
-
-        # The request message for canceling a DLP job.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. The name of the DlpJob resource to be cancelled.
-        class CancelDlpJobRequest; end
-
-        # The request message for deleting a DLP job.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. The name of the DlpJob resource to be deleted.
-        class DeleteDlpJobRequest; end
-
-        # Request message for CreateDeidentifyTemplate.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. The parent resource name, for example projects/my-project-id or
-        #     organizations/my-org-id.
-        # @!attribute [rw] deidentify_template
-        #   @return [Google::Privacy::Dlp::V2::DeidentifyTemplate]
-        #     Required. The DeidentifyTemplate to create.
-        # @!attribute [rw] template_id
-        #   @return [String]
-        #     The template id can contain uppercase and lowercase letters,
-        #     numbers, and hyphens; that is, it must match the regular
-        #     expression: `[a-zA-Z\\d-_]+`. The maximum length is 100
-        #     characters. Can be empty to allow the system to generate one.
-        # @!attribute [rw] location_id
-        #   @return [String]
-        #     The geographic location to store the deidentification template. Reserved
-        #     for future extensions.
-        class CreateDeidentifyTemplateRequest; end
-
-        # Request message for UpdateDeidentifyTemplate.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Resource name of organization and deidentify template to be updated, for
-        #     example `organizations/433245324/deidentifyTemplates/432452342` or
-        #     projects/project-id/deidentifyTemplates/432452342.
-        # @!attribute [rw] deidentify_template
-        #   @return [Google::Privacy::Dlp::V2::DeidentifyTemplate]
-        #     New DeidentifyTemplate value.
-        # @!attribute [rw] update_mask
-        #   @return [Google::Protobuf::FieldMask]
-        #     Mask to control which fields get updated.
-        class UpdateDeidentifyTemplateRequest; end
-
-        # Request message for GetDeidentifyTemplate.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Resource name of the organization and deidentify template to be read, for
-        #     example `organizations/433245324/deidentifyTemplates/432452342` or
-        #     projects/project-id/deidentifyTemplates/432452342.
-        class GetDeidentifyTemplateRequest; end
-
-        # Request message for ListDeidentifyTemplates.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. The parent resource name, for example projects/my-project-id or
-        #     organizations/my-org-id.
-        # @!attribute [rw] page_token
-        #   @return [String]
-        #     Page token to continue retrieval. Comes from previous call
-        #     to `ListDeidentifyTemplates`.
-        # @!attribute [rw] page_size
-        #   @return [Integer]
-        #     Size of the page, can be limited by server. If zero server returns
-        #     a page of max size 100.
-        # @!attribute [rw] order_by
-        #   @return [String]
-        #     Comma separated list of fields to order by,
-        #     followed by `asc` or `desc` postfix. This list is case-insensitive,
-        #     default sorting order is ascending, redundant space characters are
-        #     insignificant.
-        #
-        #     Example: `name asc,update_time, create_time desc`
-        #
-        #     Supported fields are:
-        #
-        #     * `create_time`: corresponds to time the template was created.
-        #     * `update_time`: corresponds to time the template was last updated.
-        #     * `name`: corresponds to template's name.
-        #     * `display_name`: corresponds to template's display name.
-        # @!attribute [rw] location_id
-        #   @return [String]
-        #     The geographic location where deidentifications templates will be retrieved
-        #     from. Use `-` for all locations. Reserved for future extensions.
-        class ListDeidentifyTemplatesRequest; end
-
-        # Response message for ListDeidentifyTemplates.
-        # @!attribute [rw] deidentify_templates
-        #   @return [Array<Google::Privacy::Dlp::V2::DeidentifyTemplate>]
-        #     List of deidentify templates, up to page_size in
-        #     ListDeidentifyTemplatesRequest.
-        # @!attribute [rw] next_page_token
-        #   @return [String]
-        #     If the next page is available then the next page token to be used
-        #     in following ListDeidentifyTemplates request.
-        class ListDeidentifyTemplatesResponse; end
-
-        # Request message for DeleteDeidentifyTemplate.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Resource name of the organization and deidentify template to be deleted,
-        #     for example `organizations/433245324/deidentifyTemplates/432452342` or
-        #     projects/project-id/deidentifyTemplates/432452342.
-        class DeleteDeidentifyTemplateRequest; end
-
-        # Configuration for a custom dictionary created from a data source of any size
-        # up to the maximum size defined in the
-        # [limits](https://cloud.google.com/dlp/limits) page. The artifacts of
-        # dictionary creation are stored in the specified Google Cloud Storage
-        # location. Consider using `CustomInfoType.Dictionary` for smaller dictionaries
-        # that satisfy the size requirements.
-        # @!attribute [rw] output_path
-        #   @return [Google::Privacy::Dlp::V2::CloudStoragePath]
-        #     Location to store dictionary artifacts in Google Cloud Storage. These files
-        #     will only be accessible by project owners and the DLP API. If any of these
-        #     artifacts are modified, the dictionary is considered invalid and can no
-        #     longer be used.
-        # @!attribute [rw] cloud_storage_file_set
-        #   @return [Google::Privacy::Dlp::V2::CloudStorageFileSet]
-        #     Set of files containing newline-delimited lists of dictionary phrases.
-        # @!attribute [rw] big_query_field
-        #   @return [Google::Privacy::Dlp::V2::BigQueryField]
-        #     Field in a BigQuery table where each cell represents a dictionary phrase.
-        class LargeCustomDictionaryConfig; end
-
-        # Summary statistics of a custom dictionary.
-        # @!attribute [rw] approx_num_phrases
-        #   @return [Integer]
-        #     Approximate number of distinct phrases in the dictionary.
-        class LargeCustomDictionaryStats; end
-
-        # Configuration for stored infoTypes. All fields and subfield are provided
-        # by the user. For more information, see
-        # https://cloud.google.com/dlp/docs/creating-custom-infotypes.
-        # @!attribute [rw] display_name
-        #   @return [String]
-        #     Display name of the StoredInfoType (max 256 characters).
-        # @!attribute [rw] description
-        #   @return [String]
-        #     Description of the StoredInfoType (max 256 characters).
-        # @!attribute [rw] large_custom_dictionary
-        #   @return [Google::Privacy::Dlp::V2::LargeCustomDictionaryConfig]
-        #     StoredInfoType where findings are defined by a dictionary of phrases.
-        class StoredInfoTypeConfig; end
-
-        # Statistics for a StoredInfoType.
-        # @!attribute [rw] large_custom_dictionary
-        #   @return [Google::Privacy::Dlp::V2::LargeCustomDictionaryStats]
-        #     StoredInfoType where findings are defined by a dictionary of phrases.
-        class StoredInfoTypeStats; end
-
-        # Version of a StoredInfoType, including the configuration used to build it,
-        # create timestamp, and current state.
-        # @!attribute [rw] config
-        #   @return [Google::Privacy::Dlp::V2::StoredInfoTypeConfig]
-        #     StoredInfoType configuration.
-        # @!attribute [rw] create_time
-        #   @return [Google::Protobuf::Timestamp]
-        #     Create timestamp of the version. Read-only, determined by the system
-        #     when the version is created.
-        # @!attribute [rw] state
-        #   @return [Google::Privacy::Dlp::V2::StoredInfoTypeState]
-        #     Stored info type version state. Read-only, updated by the system
-        #     during dictionary creation.
-        # @!attribute [rw] errors
-        #   @return [Array<Google::Privacy::Dlp::V2::Error>]
-        #     Errors that occurred when creating this storedInfoType version, or
-        #     anomalies detected in the storedInfoType data that render it unusable. Only
-        #     the five most recent errors will be displayed, with the most recent error
-        #     appearing first.
-        #
-        #     For example, some of the data for stored custom dictionaries is put in
-        #     the user's Google Cloud Storage bucket, and if this data is modified or
-        #     deleted by the user or another system, the dictionary becomes invalid.
-        #
-        #     If any errors occur, fix the problem indicated by the error message and
-        #     use the UpdateStoredInfoType API method to create another version of the
-        #     storedInfoType to continue using it, reusing the same `config` if it was
-        #     not the source of the error.
-        # @!attribute [rw] stats
-        #   @return [Google::Privacy::Dlp::V2::StoredInfoTypeStats]
-        #     Statistics about this storedInfoType version.
-        class StoredInfoTypeVersion; end
-
-        # StoredInfoType resource message that contains information about the current
-        # version and any pending updates.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Resource name.
-        # @!attribute [rw] current_version
-        #   @return [Google::Privacy::Dlp::V2::StoredInfoTypeVersion]
-        #     Current version of the stored info type.
-        # @!attribute [rw] pending_versions
-        #   @return [Array<Google::Privacy::Dlp::V2::StoredInfoTypeVersion>]
-        #     Pending versions of the stored info type. Empty if no versions are
-        #     pending.
-        class StoredInfoType; end
-
-        # Request message for CreateStoredInfoType.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. The parent resource name, for example projects/my-project-id or
-        #     organizations/my-org-id.
-        # @!attribute [rw] config
-        #   @return [Google::Privacy::Dlp::V2::StoredInfoTypeConfig]
-        #     Required. Configuration of the storedInfoType to create.
-        # @!attribute [rw] stored_info_type_id
-        #   @return [String]
-        #     The storedInfoType ID can contain uppercase and lowercase letters,
-        #     numbers, and hyphens; that is, it must match the regular
-        #     expression: `[a-zA-Z\\d-_]+`. The maximum length is 100
-        #     characters. Can be empty to allow the system to generate one.
-        # @!attribute [rw] location_id
-        #   @return [String]
-        #     The geographic location to store the stored infoType. Reserved for
-        #     future extensions.
-        class CreateStoredInfoTypeRequest; end
-
-        # Request message for UpdateStoredInfoType.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Resource name of organization and storedInfoType to be updated, for
-        #     example `organizations/433245324/storedInfoTypes/432452342` or
-        #     projects/project-id/storedInfoTypes/432452342.
-        # @!attribute [rw] config
-        #   @return [Google::Privacy::Dlp::V2::StoredInfoTypeConfig]
-        #     Updated configuration for the storedInfoType. If not provided, a new
-        #     version of the storedInfoType will be created with the existing
-        #     configuration.
-        # @!attribute [rw] update_mask
-        #   @return [Google::Protobuf::FieldMask]
-        #     Mask to control which fields get updated.
-        class UpdateStoredInfoTypeRequest; end
-
-        # Request message for GetStoredInfoType.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Resource name of the organization and storedInfoType to be read, for
-        #     example `organizations/433245324/storedInfoTypes/432452342` or
-        #     projects/project-id/storedInfoTypes/432452342.
-        class GetStoredInfoTypeRequest; end
-
-        # Request message for ListStoredInfoTypes.
-        # @!attribute [rw] parent
-        #   @return [String]
-        #     Required. The parent resource name, for example projects/my-project-id or
-        #     organizations/my-org-id.
-        # @!attribute [rw] page_token
-        #   @return [String]
-        #     Page token to continue retrieval. Comes from previous call
-        #     to `ListStoredInfoTypes`.
-        # @!attribute [rw] page_size
-        #   @return [Integer]
-        #     Size of the page, can be limited by server. If zero server returns
-        #     a page of max size 100.
-        # @!attribute [rw] order_by
-        #   @return [String]
-        #     Comma separated list of fields to order by,
-        #     followed by `asc` or `desc` postfix. This list is case-insensitive,
-        #     default sorting order is ascending, redundant space characters are
-        #     insignificant.
-        #
-        #     Example: `name asc, display_name, create_time desc`
-        #
-        #     Supported fields are:
-        #
-        #     * `create_time`: corresponds to time the most recent version of the
-        #       resource was created.
-        #     * `state`: corresponds to the state of the resource.
-        #     * `name`: corresponds to resource name.
-        #     * `display_name`: corresponds to info type's display name.
-        # @!attribute [rw] location_id
-        #   @return [String]
-        #     The geographic location where stored infoTypes will be retrieved from.
-        #     Use `-` for all locations. Reserved for future extensions.
-        class ListStoredInfoTypesRequest; end
-
-        # Response message for ListStoredInfoTypes.
-        # @!attribute [rw] stored_info_types
-        #   @return [Array<Google::Privacy::Dlp::V2::StoredInfoType>]
-        #     List of storedInfoTypes, up to page_size in ListStoredInfoTypesRequest.
-        # @!attribute [rw] next_page_token
-        #   @return [String]
-        #     If the next page is available then the next page token to be used
-        #     in following ListStoredInfoTypes request.
-        class ListStoredInfoTypesResponse; end
-
-        # Request message for DeleteStoredInfoType.
-        # @!attribute [rw] name
-        #   @return [String]
-        #     Required. Resource name of the organization and storedInfoType to be deleted, for
-        #     example `organizations/433245324/storedInfoTypes/432452342` or
-        #     projects/project-id/storedInfoTypes/432452342.
-        class DeleteStoredInfoTypeRequest; end
-
-        # Options describing which parts of the provided content should be scanned.
-        module ContentOption
-          # Includes entire content of a file or a data stream.
-          CONTENT_UNSPECIFIED = 0
-
-          # Text content within the data, excluding any metadata.
-          CONTENT_TEXT = 1
-
-          # Images found in the data.
-          CONTENT_IMAGE = 2
-        end
-
-        # An enum to represent the various types of DLP jobs.
-        module DlpJobType
-          # Unused
-          DLP_JOB_TYPE_UNSPECIFIED = 0
-
-          # The job inspected Google Cloud for sensitive data.
-          INSPECT_JOB = 1
-
-          # The job executed a Risk Analysis computation.
-          RISK_ANALYSIS_JOB = 2
-        end
-
-        # Parts of the APIs which use certain infoTypes.
-        module InfoTypeSupportedBy
-          # Unused.
-          ENUM_TYPE_UNSPECIFIED = 0
-
-          # Supported by the inspect operations.
-          INSPECT = 1
-
-          # Supported by the risk analysis operations.
-          RISK_ANALYSIS = 2
-        end
-
-        # Type of the match which can be applied to different ways of matching, like
-        # Dictionary, regular expression and intersecting with findings of another
-        # info type.
-        module MatchingType
-          # Invalid.
-          MATCHING_TYPE_UNSPECIFIED = 0
-
-          # Full match.
-          #
-          # * Dictionary: join of Dictionary results matched complete finding quote
-          # * Regex: all regex matches fill a finding quote start to end
-          # * Exclude info type: completely inside affecting info types findings
-          MATCHING_TYPE_FULL_MATCH = 1
-
-          # Partial match.
-          #
-          # * Dictionary: at least one of the tokens in the finding matches
-          # * Regex: substring of the finding matches
-          # * Exclude info type: intersects with affecting info types findings
-          MATCHING_TYPE_PARTIAL_MATCH = 2
-
-          # Inverse match.
-          #
-          # * Dictionary: no tokens in the finding match the dictionary
-          # * Regex: finding doesn't match the regex
-          # * Exclude info type: no intersection with affecting info types findings
-          MATCHING_TYPE_INVERSE_MATCH = 3
-        end
-
-        # Operators available for comparing the value of fields.
-        module RelationalOperator
-          # Unused
-          RELATIONAL_OPERATOR_UNSPECIFIED = 0
-
-          # Equal. Attempts to match even with incompatible types.
-          EQUAL_TO = 1
-
-          # Not equal to. Attempts to match even with incompatible types.
-          NOT_EQUAL_TO = 2
-
-          # Greater than.
-          GREATER_THAN = 3
-
-          # Less than.
-          LESS_THAN = 4
-
-          # Greater than or equals.
-          GREATER_THAN_OR_EQUALS = 5
-
-          # Less than or equals.
-          LESS_THAN_OR_EQUALS = 6
-
-          # Exists
-          EXISTS = 7
-        end
-
-        # State of a StoredInfoType version.
-        module StoredInfoTypeState
-          # Unused
-          STORED_INFO_TYPE_STATE_UNSPECIFIED = 0
-
-          # StoredInfoType version is being created.
-          PENDING = 1
-
-          # StoredInfoType version is ready for use.
-          READY = 2
-
-          # StoredInfoType creation failed. All relevant error messages are returned in
-          # the `StoredInfoTypeVersion` message.
-          FAILED = 3
-
-          # StoredInfoType is no longer valid because artifacts stored in
-          # user-controlled storage were modified. To fix an invalid StoredInfoType,
-          # use the `UpdateStoredInfoType` method to create a new version.
-          INVALID = 4
-        end
-      end
-    end
-  end
-end