google-cloud-bigtable 1.3.0 → 2.0.0

data/lib/google/cloud/bigtable/admin/v2/doc/google/protobuf/empty.rb

@@ -1,29 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Protobuf
-    # A generic empty message that you can re-use to avoid defining duplicated
-    # empty messages in your APIs. A typical example is to use it as the request
-    # or the response type of an API method. For instance:
-    #
-    #     service Foo {
-    #       rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty);
-    #     }
-    #
-    # The JSON representation for `Empty` is empty JSON object `{}`.
-    class Empty; end
-  end
-end

data/lib/google/cloud/bigtable/admin/v2/doc/google/protobuf/field_mask.rb

@@ -1,222 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Protobuf
-    # `FieldMask` represents a set of symbolic field paths, for example:
-    #
-    #     paths: "f.a"
-    #     paths: "f.b.d"
-    #
-    # Here `f` represents a field in some root message, `a` and `b`
-    # fields in the message found in `f`, and `d` a field found in the
-    # message in `f.b`.
-    #
-    # Field masks are used to specify a subset of fields that should be
-    # returned by a get operation or modified by an update operation.
-    # Field masks also have a custom JSON encoding (see below).
-    #
-    # = Field Masks in Projections
-    #
-    # When used in the context of a projection, a response message or
-    # sub-message is filtered by the API to only contain those fields as
-    # specified in the mask. For example, if the mask in the previous
-    # example is applied to a response message as follows:
-    #
-    #     f {
-    #       a : 22
-    #       b {
-    #         d : 1
-    #         x : 2
-    #       }
-    #       y : 13
-    #     }
-    #     z: 8
-    #
-    # The result will not contain specific values for fields x,y and z
-    # (their value will be set to the default, and omitted in proto text
-    # output):
-    #
-    #
-    #     f {
-    #       a : 22
-    #       b {
-    #         d : 1
-    #       }
-    #     }
-    #
-    # A repeated field is not allowed except at the last position of a
-    # paths string.
-    #
-    # If a FieldMask object is not present in a get operation, the
-    # operation applies to all fields (as if a FieldMask of all fields
-    # had been specified).
-    #
-    # Note that a field mask does not necessarily apply to the
-    # top-level response message. In case of a REST get operation, the
-    # field mask applies directly to the response, but in case of a REST
-    # list operation, the mask instead applies to each individual message
-    # in the returned resource list. In case of a REST custom method,
-    # other definitions may be used. Where the mask applies will be
-    # clearly documented together with its declaration in the API.  In
-    # any case, the effect on the returned resource/resources is required
-    # behavior for APIs.
-    #
-    # = Field Masks in Update Operations
-    #
-    # A field mask in update operations specifies which fields of the
-    # targeted resource are going to be updated. The API is required
-    # to only change the values of the fields as specified in the mask
-    # and leave the others untouched. If a resource is passed in to
-    # describe the updated values, the API ignores the values of all
-    # fields not covered by the mask.
-    #
-    # If a repeated field is specified for an update operation, new values will
-    # be appended to the existing repeated field in the target resource. Note that
-    # a repeated field is only allowed in the last position of a `paths` string.
-    #
-    # If a sub-message is specified in the last position of the field mask for an
-    # update operation, then new value will be merged into the existing sub-message
-    # in the target resource.
-    #
-    # For example, given the target message:
-    #
-    #     f {
-    #       b {
-    #         d: 1
-    #         x: 2
-    #       }
-    #       c: [1]
-    #     }
-    #
-    # And an update message:
-    #
-    #     f {
-    #       b {
-    #         d: 10
-    #       }
-    #       c: [2]
-    #     }
-    #
-    # then if the field mask is:
-    #
-    #  paths: ["f.b", "f.c"]
-    #
-    # then the result will be:
-    #
-    #     f {
-    #       b {
-    #         d: 10
-    #         x: 2
-    #       }
-    #       c: [1, 2]
-    #     }
-    #
-    # An implementation may provide options to override this default behavior for
-    # repeated and message fields.
-    #
-    # In order to reset a field's value to the default, the field must
-    # be in the mask and set to the default value in the provided resource.
-    # Hence, in order to reset all fields of a resource, provide a default
-    # instance of the resource and set all fields in the mask, or do
-    # not provide a mask as described below.
-    #
-    # If a field mask is not present on update, the operation applies to
-    # all fields (as if a field mask of all fields has been specified).
-    # Note that in the presence of schema evolution, this may mean that
-    # fields the client does not know and has therefore not filled into
-    # the request will be reset to their default. If this is unwanted
-    # behavior, a specific service may require a client to always specify
-    # a field mask, producing an error if not.
-    #
-    # As with get operations, the location of the resource which
-    # describes the updated values in the request message depends on the
-    # operation kind. In any case, the effect of the field mask is
-    # required to be honored by the API.
-    #
-    # == Considerations for HTTP REST
-    #
-    # The HTTP kind of an update operation which uses a field mask must
-    # be set to PATCH instead of PUT in order to satisfy HTTP semantics
-    # (PUT must only be used for full updates).
-    #
-    # = JSON Encoding of Field Masks
-    #
-    # In JSON, a field mask is encoded as a single string where paths are
-    # separated by a comma. Fields name in each path are converted
-    # to/from lower-camel naming conventions.
-    #
-    # As an example, consider the following message declarations:
-    #
-    #     message Profile {
-    #       User user = 1;
-    #       Photo photo = 2;
-    #     }
-    #     message User {
-    #       string display_name = 1;
-    #       string address = 2;
-    #     }
-    #
-    # In proto a field mask for `Profile` may look as such:
-    #
-    #     mask {
-    #       paths: "user.display_name"
-    #       paths: "photo"
-    #     }
-    #
-    # In JSON, the same mask is represented as below:
-    #
-    #     {
-    #       mask: "user.displayName,photo"
-    #     }
-    #
-    # = Field Masks and Oneof Fields
-    #
-    # Field masks treat fields in oneofs just as regular fields. Consider the
-    # following message:
-    #
-    #     message SampleMessage {
-    #       oneof test_oneof {
-    #         string name = 4;
-    #         SubMessage sub_message = 9;
-    #       }
-    #     }
-    #
-    # The field mask can be:
-    #
-    #     mask {
-    #       paths: "name"
-    #     }
-    #
-    # Or:
-    #
-    #     mask {
-    #       paths: "sub_message"
-    #     }
-    #
-    # Note that oneof type names ("test_oneof" in this case) cannot be used in
-    # paths.
-    #
-    # == Field Mask Verification
-    #
-    # The implementation of any API method which has a FieldMask type field in the
-    # request should verify the included field paths, and return an
-    # `INVALID_ARGUMENT` error if any path is duplicated or unmappable.
-    # @!attribute [rw] paths
-    #   @return [Array<String>]
-    #     The set of field mask paths.
-    class FieldMask; end
-  end
-end

data/lib/google/cloud/bigtable/admin/v2/doc/google/protobuf/timestamp.rb

@@ -1,113 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Protobuf
-    # A Timestamp represents a point in time independent of any time zone or local
-    # calendar, encoded as a count of seconds and fractions of seconds at
-    # nanosecond resolution. The count is relative to an epoch at UTC midnight on
-    # January 1, 1970, in the proleptic Gregorian calendar which extends the
-    # Gregorian calendar backwards to year one.
-    #
-    # All minutes are 60 seconds long. Leap seconds are "smeared" so that no leap
-    # second table is needed for interpretation, using a [24-hour linear
-    # smear](https://developers.google.com/time/smear).
-    #
-    # The range is from 0001-01-01T00:00:00Z to 9999-12-31T23:59:59.999999999Z. By
-    # restricting to that range, we ensure that we can convert to and from [RFC
-    # 3339](https://www.ietf.org/rfc/rfc3339.txt) date strings.
-    #
-    # = Examples
-    #
-    # Example 1: Compute Timestamp from POSIX `time()`.
-    #
-    #     Timestamp timestamp;
-    #     timestamp.set_seconds(time(NULL));
-    #     timestamp.set_nanos(0);
-    #
-    # Example 2: Compute Timestamp from POSIX `gettimeofday()`.
-    #
-    #     struct timeval tv;
-    #     gettimeofday(&tv, NULL);
-    #
-    #     Timestamp timestamp;
-    #     timestamp.set_seconds(tv.tv_sec);
-    #     timestamp.set_nanos(tv.tv_usec * 1000);
-    #
-    # Example 3: Compute Timestamp from Win32 `GetSystemTimeAsFileTime()`.
-    #
-    #     FILETIME ft;
-    #     GetSystemTimeAsFileTime(&ft);
-    #     UINT64 ticks = (((UINT64)ft.dwHighDateTime) << 32) | ft.dwLowDateTime;
-    #
-    #     // A Windows tick is 100 nanoseconds. Windows epoch 1601-01-01T00:00:00Z
-    #     // is 11644473600 seconds before Unix epoch 1970-01-01T00:00:00Z.
-    #     Timestamp timestamp;
-    #     timestamp.set_seconds((INT64) ((ticks / 10000000) - 11644473600LL));
-    #     timestamp.set_nanos((INT32) ((ticks % 10000000) * 100));
-    #
-    # Example 4: Compute Timestamp from Java `System.currentTimeMillis()`.
-    #
-    #     long millis = System.currentTimeMillis();
-    #
-    #     Timestamp timestamp = Timestamp.newBuilder().setSeconds(millis / 1000)
-    #         .setNanos((int) ((millis % 1000) * 1000000)).build();
-    #
-    #
-    # Example 5: Compute Timestamp from current time in Python.
-    #
-    #     timestamp = Timestamp()
-    #     timestamp.GetCurrentTime()
-    #
-    # = JSON Mapping
-    #
-    # In JSON format, the Timestamp type is encoded as a string in the
-    # [RFC 3339](https://www.ietf.org/rfc/rfc3339.txt) format. That is, the
-    # format is "\\{year}-\\{month}-\\{day}T\\{hour}:\\{min}:\\{sec}[.\\{frac_sec}]Z"
-    # where \\{year} is always expressed using four digits while \\{month}, \\{day},
-    # \\{hour}, \\{min}, and \\{sec} are zero-padded to two digits each. The fractional
-    # seconds, which can go up to 9 digits (i.e. up to 1 nanosecond resolution),
-    # are optional. The "Z" suffix indicates the timezone ("UTC"); the timezone
-    # is required. A proto3 JSON serializer should always use UTC (as indicated by
-    # "Z") when printing the Timestamp type and a proto3 JSON parser should be
-    # able to accept both UTC and other timezones (as indicated by an offset).
-    #
-    # For example, "2017-01-15T01:30:15.01Z" encodes 15.01 seconds past
-    # 01:30 UTC on January 15, 2017.
-    #
-    # In JavaScript, one can convert a Date object to this format using the
-    # standard
-    # [toISOString()](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Date/toISOString)
-    # method. In Python, a standard `datetime.datetime` object can be converted
-    # to this format using
-    # [`strftime`](https://docs.python.org/2/library/time.html#time.strftime) with
-    # the time format spec '%Y-%m-%dT%H:%M:%S.%fZ'. Likewise, in Java, one can use
-    # the Joda Time's [`ISODateTimeFormat.dateTime()`](
-    # http://www.joda.org/joda-time/apidocs/org/joda/time/format/ISODateTimeFormat.html#dateTime%2D%2D
-    # ) to obtain a formatter capable of generating timestamps in this format.
-    # @!attribute [rw] seconds
-    #   @return [Integer]
-    #     Represents seconds of UTC time since Unix epoch
-    #     1970-01-01T00:00:00Z. Must be from 0001-01-01T00:00:00Z to
-    #     9999-12-31T23:59:59Z inclusive.
-    # @!attribute [rw] nanos
-    #   @return [Integer]
-    #     Non-negative fractions of a second at nanosecond resolution. Negative
-    #     second values with fractions must still have non-negative nanos values
-    #     that count forward in time. Must be from 0 to 999,999,999
-    #     inclusive.
-    class Timestamp; end
-  end
-end

data/lib/google/cloud/bigtable/admin/v2/doc/google/rpc/status.rb

@@ -1,39 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Rpc
-    # The `Status` type defines a logical error model that is suitable for
-    # different programming environments, including REST APIs and RPC APIs. It is
-    # used by [gRPC](https://github.com/grpc). Each `Status` message contains
-    # three pieces of data: error code, error message, and error details.
-    #
-    # You can find out more about this error model and how to work with it in the
-    # [API Design Guide](https://cloud.google.com/apis/design/errors).
-    # @!attribute [rw] code
-    #   @return [Integer]
-    #     The status code, which should be an enum value of {Google::Rpc::Code}.
-    # @!attribute [rw] message
-    #   @return [String]
-    #     A developer-facing error message, which should be in English. Any
-    #     user-facing error message should be localized and sent in the
-    #     {Google::Rpc::Status#details} field, or localized by the client.
-    # @!attribute [rw] details
-    #   @return [Array<Google::Protobuf::Any>]
-    #     A list of messages that carry the error details.  There is a common set of
-    #     message types for APIs to use.
-    class Status; end
-  end
-end

data/lib/google/cloud/bigtable/admin/v2/doc/google/type/expr.rb

@@ -1,45 +0,0 @@
-# Copyright 2020 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Type
-    # Represents an expression text. Example:
-    #
-    #     title: "User account presence"
-    #     description: "Determines whether the request has a user account"
-    #     expression: "size(request.user) > 0"
-    # @!attribute [rw] expression
-    #   @return [String]
-    #     Textual representation of an expression in
-    #     Common Expression Language syntax.
-    #
-    #     The application context of the containing message determines which
-    #     well-known feature set of CEL is supported.
-    # @!attribute [rw] title
-    #   @return [String]
-    #     An optional title for the expression, i.e. a short string describing
-    #     its purpose. This can be used e.g. in UIs which allow to enter the
-    #     expression.
-    # @!attribute [rw] description
-    #   @return [String]
-    #     An optional description of the expression. This is a longer text which
-    #     describes the expression, e.g. when hovered over it in a UI.
-    # @!attribute [rw] location
-    #   @return [String]
-    #     An optional string indicating the location of the expression for error
-    #     reporting, e.g. a file name and a position in the file.
-    class Expr; end
-  end
-end