google-cloud-bigquery-migration-v2 0.1.0

data/proto_docs/google/protobuf/field_mask.rb

@@ -0,0 +1,229 @@
+# frozen_string_literal: true
+
+# Copyright 2022 Google LLC
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Auto-generated by gapic-generator-ruby. DO NOT EDIT!
+
+
+module Google
+  module Protobuf
+    # `FieldMask` represents a set of symbolic field paths, for example:
+    #
+    #     paths: "f.a"
+    #     paths: "f.b.d"
+    #
+    # Here `f` represents a field in some root message, `a` and `b`
+    # fields in the message found in `f`, and `d` a field found in the
+    # message in `f.b`.
+    #
+    # Field masks are used to specify a subset of fields that should be
+    # returned by a get operation or modified by an update operation.
+    # Field masks also have a custom JSON encoding (see below).
+    #
+    # # Field Masks in Projections
+    #
+    # When used in the context of a projection, a response message or
+    # sub-message is filtered by the API to only contain those fields as
+    # specified in the mask. For example, if the mask in the previous
+    # example is applied to a response message as follows:
+    #
+    #     f {
+    #       a : 22
+    #       b {
+    #         d : 1
+    #         x : 2
+    #       }
+    #       y : 13
+    #     }
+    #     z: 8
+    #
+    # The result will not contain specific values for fields x,y and z
+    # (their value will be set to the default, and omitted in proto text
+    # output):
+    #
+    #
+    #     f {
+    #       a : 22
+    #       b {
+    #         d : 1
+    #       }
+    #     }
+    #
+    # A repeated field is not allowed except at the last position of a
+    # paths string.
+    #
+    # If a FieldMask object is not present in a get operation, the
+    # operation applies to all fields (as if a FieldMask of all fields
+    # had been specified).
+    #
+    # Note that a field mask does not necessarily apply to the
+    # top-level response message. In case of a REST get operation, the
+    # field mask applies directly to the response, but in case of a REST
+    # list operation, the mask instead applies to each individual message
+    # in the returned resource list. In case of a REST custom method,
+    # other definitions may be used. Where the mask applies will be
+    # clearly documented together with its declaration in the API.  In
+    # any case, the effect on the returned resource/resources is required
+    # behavior for APIs.
+    #
+    # # Field Masks in Update Operations
+    #
+    # A field mask in update operations specifies which fields of the
+    # targeted resource are going to be updated. The API is required
+    # to only change the values of the fields as specified in the mask
+    # and leave the others untouched. If a resource is passed in to
+    # describe the updated values, the API ignores the values of all
+    # fields not covered by the mask.
+    #
+    # If a repeated field is specified for an update operation, new values will
+    # be appended to the existing repeated field in the target resource. Note that
+    # a repeated field is only allowed in the last position of a `paths` string.
+    #
+    # If a sub-message is specified in the last position of the field mask for an
+    # update operation, then new value will be merged into the existing sub-message
+    # in the target resource.
+    #
+    # For example, given the target message:
+    #
+    #     f {
+    #       b {
+    #         d: 1
+    #         x: 2
+    #       }
+    #       c: [1]
+    #     }
+    #
+    # And an update message:
+    #
+    #     f {
+    #       b {
+    #         d: 10
+    #       }
+    #       c: [2]
+    #     }
+    #
+    # then if the field mask is:
+    #
+    #  paths: ["f.b", "f.c"]
+    #
+    # then the result will be:
+    #
+    #     f {
+    #       b {
+    #         d: 10
+    #         x: 2
+    #       }
+    #       c: [1, 2]
+    #     }
+    #
+    # An implementation may provide options to override this default behavior for
+    # repeated and message fields.
+    #
+    # In order to reset a field's value to the default, the field must
+    # be in the mask and set to the default value in the provided resource.
+    # Hence, in order to reset all fields of a resource, provide a default
+    # instance of the resource and set all fields in the mask, or do
+    # not provide a mask as described below.
+    #
+    # If a field mask is not present on update, the operation applies to
+    # all fields (as if a field mask of all fields has been specified).
+    # Note that in the presence of schema evolution, this may mean that
+    # fields the client does not know and has therefore not filled into
+    # the request will be reset to their default. If this is unwanted
+    # behavior, a specific service may require a client to always specify
+    # a field mask, producing an error if not.
+    #
+    # As with get operations, the location of the resource which
+    # describes the updated values in the request message depends on the
+    # operation kind. In any case, the effect of the field mask is
+    # required to be honored by the API.
+    #
+    # ## Considerations for HTTP REST
+    #
+    # The HTTP kind of an update operation which uses a field mask must
+    # be set to PATCH instead of PUT in order to satisfy HTTP semantics
+    # (PUT must only be used for full updates).
+    #
+    # # JSON Encoding of Field Masks
+    #
+    # In JSON, a field mask is encoded as a single string where paths are
+    # separated by a comma. Fields name in each path are converted
+    # to/from lower-camel naming conventions.
+    #
+    # As an example, consider the following message declarations:
+    #
+    #     message Profile {
+    #       User user = 1;
+    #       Photo photo = 2;
+    #     }
+    #     message User {
+    #       string display_name = 1;
+    #       string address = 2;
+    #     }
+    #
+    # In proto a field mask for `Profile` may look as such:
+    #
+    #     mask {
+    #       paths: "user.display_name"
+    #       paths: "photo"
+    #     }
+    #
+    # In JSON, the same mask is represented as below:
+    #
+    #     {
+    #       mask: "user.displayName,photo"
+    #     }
+    #
+    # # Field Masks and Oneof Fields
+    #
+    # Field masks treat fields in oneofs just as regular fields. Consider the
+    # following message:
+    #
+    #     message SampleMessage {
+    #       oneof test_oneof {
+    #         string name = 4;
+    #         SubMessage sub_message = 9;
+    #       }
+    #     }
+    #
+    # The field mask can be:
+    #
+    #     mask {
+    #       paths: "name"
+    #     }
+    #
+    # Or:
+    #
+    #     mask {
+    #       paths: "sub_message"
+    #     }
+    #
+    # Note that oneof type names ("test_oneof" in this case) cannot be used in
+    # paths.
+    #
+    # ## Field Mask Verification
+    #
+    # The implementation of any API method which has a FieldMask type field in the
+    # request should verify the included field paths, and return an
+    # `INVALID_ARGUMENT` error if any path is unmappable.
+    # @!attribute [rw] paths
+    #   @return [::Array<::String>]
+    #     The set of field mask paths.
+    class FieldMask
+      include ::Google::Protobuf::MessageExts
+      extend ::Google::Protobuf::MessageExts::ClassMethods
+    end
+  end
+end

data/proto_docs/google/protobuf/timestamp.rb

@@ -0,0 +1,129 @@
+# frozen_string_literal: true
+
+# Copyright 2022 Google LLC
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Auto-generated by gapic-generator-ruby. DO NOT EDIT!
+
+
+module Google
+  module Protobuf
+    # A Timestamp represents a point in time independent of any time zone or local
+    # calendar, encoded as a count of seconds and fractions of seconds at
+    # nanosecond resolution. The count is relative to an epoch at UTC midnight on
+    # January 1, 1970, in the proleptic Gregorian calendar which extends the
+    # Gregorian calendar backwards to year one.
+    #
+    # All minutes are 60 seconds long. Leap seconds are "smeared" so that no leap
+    # second table is needed for interpretation, using a [24-hour linear
+    # smear](https://developers.google.com/time/smear).
+    #
+    # The range is from 0001-01-01T00:00:00Z to 9999-12-31T23:59:59.999999999Z. By
+    # restricting to that range, we ensure that we can convert to and from [RFC
+    # 3339](https://www.ietf.org/rfc/rfc3339.txt) date strings.
+    #
+    # # Examples
+    #
+    # Example 1: Compute Timestamp from POSIX `time()`.
+    #
+    #     Timestamp timestamp;
+    #     timestamp.set_seconds(time(NULL));
+    #     timestamp.set_nanos(0);
+    #
+    # Example 2: Compute Timestamp from POSIX `gettimeofday()`.
+    #
+    #     struct timeval tv;
+    #     gettimeofday(&tv, NULL);
+    #
+    #     Timestamp timestamp;
+    #     timestamp.set_seconds(tv.tv_sec);
+    #     timestamp.set_nanos(tv.tv_usec * 1000);
+    #
+    # Example 3: Compute Timestamp from Win32 `GetSystemTimeAsFileTime()`.
+    #
+    #     FILETIME ft;
+    #     GetSystemTimeAsFileTime(&ft);
+    #     UINT64 ticks = (((UINT64)ft.dwHighDateTime) << 32) | ft.dwLowDateTime;
+    #
+    #     // A Windows tick is 100 nanoseconds. Windows epoch 1601-01-01T00:00:00Z
+    #     // is 11644473600 seconds before Unix epoch 1970-01-01T00:00:00Z.
+    #     Timestamp timestamp;
+    #     timestamp.set_seconds((INT64) ((ticks / 10000000) - 11644473600LL));
+    #     timestamp.set_nanos((INT32) ((ticks % 10000000) * 100));
+    #
+    # Example 4: Compute Timestamp from Java `System.currentTimeMillis()`.
+    #
+    #     long millis = System.currentTimeMillis();
+    #
+    #     Timestamp timestamp = Timestamp.newBuilder().setSeconds(millis / 1000)
+    #         .setNanos((int) ((millis % 1000) * 1000000)).build();
+    #
+    #
+    # Example 5: Compute Timestamp from Java `Instant.now()`.
+    #
+    #     Instant now = Instant.now();
+    #
+    #     Timestamp timestamp =
+    #         Timestamp.newBuilder().setSeconds(now.getEpochSecond())
+    #             .setNanos(now.getNano()).build();
+    #
+    #
+    # Example 6: Compute Timestamp from current time in Python.
+    #
+    #     timestamp = Timestamp()
+    #     timestamp.GetCurrentTime()
+    #
+    # # JSON Mapping
+    #
+    # In JSON format, the Timestamp type is encoded as a string in the
+    # [RFC 3339](https://www.ietf.org/rfc/rfc3339.txt) format. That is, the
+    # format is "\\{year}-\\{month}-\\{day}T\\{hour}:\\{min}:\\{sec}[.\\{frac_sec}]Z"
+    # where \\{year} is always expressed using four digits while \\{month}, \\{day},
+    # \\{hour}, \\{min}, and \\{sec} are zero-padded to two digits each. The fractional
+    # seconds, which can go up to 9 digits (i.e. up to 1 nanosecond resolution),
+    # are optional. The "Z" suffix indicates the timezone ("UTC"); the timezone
+    # is required. A proto3 JSON serializer should always use UTC (as indicated by
+    # "Z") when printing the Timestamp type and a proto3 JSON parser should be
+    # able to accept both UTC and other timezones (as indicated by an offset).
+    #
+    # For example, "2017-01-15T01:30:15.01Z" encodes 15.01 seconds past
+    # 01:30 UTC on January 15, 2017.
+    #
+    # In JavaScript, one can convert a Date object to this format using the
+    # standard
+    # [toISOString()](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Date/toISOString)
+    # method. In Python, a standard `datetime.datetime` object can be converted
+    # to this format using
+    # [`strftime`](https://docs.python.org/2/library/time.html#time.strftime) with
+    # the time format spec '%Y-%m-%dT%H:%M:%S.%fZ'. Likewise, in Java, one can use
+    # the Joda Time's [`ISODateTimeFormat.dateTime()`](
+    # http://www.joda.org/joda-time/apidocs/org/joda/time/format/ISODateTimeFormat.html#dateTime%2D%2D
+    # ) to obtain a formatter capable of generating timestamps in this format.
+    # @!attribute [rw] seconds
+    #   @return [::Integer]
+    #     Represents seconds of UTC time since Unix epoch
+    #     1970-01-01T00:00:00Z. Must be from 0001-01-01T00:00:00Z to
+    #     9999-12-31T23:59:59Z inclusive.
+    # @!attribute [rw] nanos
+    #   @return [::Integer]
+    #     Non-negative fractions of a second at nanosecond resolution. Negative
+    #     second values with fractions must still have non-negative nanos values
+    #     that count forward in time. Must be from 0 to 999,999,999
+    #     inclusive.
+    class Timestamp
+      include ::Google::Protobuf::MessageExts
+      extend ::Google::Protobuf::MessageExts::ClassMethods
+    end
+  end
+end

data/proto_docs/google/rpc/error_details.rb

@@ -0,0 +1,297 @@
+# frozen_string_literal: true
+
+# Copyright 2022 Google LLC
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Auto-generated by gapic-generator-ruby. DO NOT EDIT!
+
+
+module Google
+  module Rpc
+    # Describes when the clients can retry a failed request. Clients could ignore
+    # the recommendation here or retry when this information is missing from error
+    # responses.
+    #
+    # It's always recommended that clients should use exponential backoff when
+    # retrying.
+    #
+    # Clients should wait until `retry_delay` amount of time has passed since
+    # receiving the error response before retrying.  If retrying requests also
+    # fail, clients should use an exponential backoff scheme to gradually increase
+    # the delay between retries based on `retry_delay`, until either a maximum
+    # number of retries have been reached or a maximum retry delay cap has been
+    # reached.
+    # @!attribute [rw] retry_delay
+    #   @return [::Google::Protobuf::Duration]
+    #     Clients should wait at least this long between retrying the same request.
+    class RetryInfo
+      include ::Google::Protobuf::MessageExts
+      extend ::Google::Protobuf::MessageExts::ClassMethods
+    end
+
+    # Describes additional debugging info.
+    # @!attribute [rw] stack_entries
+    #   @return [::Array<::String>]
+    #     The stack trace entries indicating where the error occurred.
+    # @!attribute [rw] detail
+    #   @return [::String]
+    #     Additional debugging information provided by the server.
+    class DebugInfo
+      include ::Google::Protobuf::MessageExts
+      extend ::Google::Protobuf::MessageExts::ClassMethods
+    end
+
+    # Describes how a quota check failed.
+    #
+    # For example if a daily limit was exceeded for the calling project,
+    # a service could respond with a QuotaFailure detail containing the project
+    # id and the description of the quota limit that was exceeded.  If the
+    # calling project hasn't enabled the service in the developer console, then
+    # a service could respond with the project id and set `service_disabled`
+    # to true.
+    #
+    # Also see RetryInfo and Help types for other details about handling a
+    # quota failure.
+    # @!attribute [rw] violations
+    #   @return [::Array<::Google::Rpc::QuotaFailure::Violation>]
+    #     Describes all quota violations.
+    class QuotaFailure
+      include ::Google::Protobuf::MessageExts
+      extend ::Google::Protobuf::MessageExts::ClassMethods
+
+      # A message type used to describe a single quota violation.  For example, a
+      # daily quota or a custom quota that was exceeded.
+      # @!attribute [rw] subject
+      #   @return [::String]
+      #     The subject on which the quota check failed.
+      #     For example, "clientip:<ip address of client>" or "project:<Google
+      #     developer project id>".
+      # @!attribute [rw] description
+      #   @return [::String]
+      #     A description of how the quota check failed. Clients can use this
+      #     description to find more about the quota configuration in the service's
+      #     public documentation, or find the relevant quota limit to adjust through
+      #     developer console.
+      #
+      #     For example: "Service disabled" or "Daily Limit for read operations
+      #     exceeded".
+      class Violation
+        include ::Google::Protobuf::MessageExts
+        extend ::Google::Protobuf::MessageExts::ClassMethods
+      end
+    end
+
+    # Describes the cause of the error with structured details.
+    #
+    # Example of an error when contacting the "pubsub.googleapis.com" API when it
+    # is not enabled:
+    #
+    #     { "reason": "API_DISABLED"
+    #       "domain": "googleapis.com"
+    #       "metadata": {
+    #         "resource": "projects/123",
+    #         "service": "pubsub.googleapis.com"
+    #       }
+    #     }
+    #
+    # This response indicates that the pubsub.googleapis.com API is not enabled.
+    #
+    # Example of an error that is returned when attempting to create a Spanner
+    # instance in a region that is out of stock:
+    #
+    #     { "reason": "STOCKOUT"
+    #       "domain": "spanner.googleapis.com",
+    #       "metadata": {
+    #         "availableRegions": "us-central1,us-east2"
+    #       }
+    #     }
+    # @!attribute [rw] reason
+    #   @return [::String]
+    #     The reason of the error. This is a constant value that identifies the
+    #     proximate cause of the error. Error reasons are unique within a particular
+    #     domain of errors. This should be at most 63 characters and match
+    #     /[A-Z0-9_]+/.
+    # @!attribute [rw] domain
+    #   @return [::String]
+    #     The logical grouping to which the "reason" belongs. The error domain
+    #     is typically the registered service name of the tool or product that
+    #     generates the error. Example: "pubsub.googleapis.com". If the error is
+    #     generated by some common infrastructure, the error domain must be a
+    #     globally unique value that identifies the infrastructure. For Google API
+    #     infrastructure, the error domain is "googleapis.com".
+    # @!attribute [rw] metadata
+    #   @return [::Google::Protobuf::Map{::String => ::String}]
+    #     Additional structured details about this error.
+    #
+    #     Keys should match /[a-zA-Z0-9-_]/ and be limited to 64 characters in
+    #     length. When identifying the current value of an exceeded limit, the units
+    #     should be contained in the key, not the value.  For example, rather than
+    #     \\{"instanceLimit": "100/request"}, should be returned as,
+    #     \\{"instanceLimitPerRequest": "100"}, if the client exceeds the number of
+    #     instances that can be created in a single (batch) request.
+    class ErrorInfo
+      include ::Google::Protobuf::MessageExts
+      extend ::Google::Protobuf::MessageExts::ClassMethods
+
+      # @!attribute [rw] key
+      #   @return [::String]
+      # @!attribute [rw] value
+      #   @return [::String]
+      class MetadataEntry
+        include ::Google::Protobuf::MessageExts
+        extend ::Google::Protobuf::MessageExts::ClassMethods
+      end
+    end
+
+    # Describes what preconditions have failed.
+    #
+    # For example, if an RPC failed because it required the Terms of Service to be
+    # acknowledged, it could list the terms of service violation in the
+    # PreconditionFailure message.
+    # @!attribute [rw] violations
+    #   @return [::Array<::Google::Rpc::PreconditionFailure::Violation>]
+    #     Describes all precondition violations.
+    class PreconditionFailure
+      include ::Google::Protobuf::MessageExts
+      extend ::Google::Protobuf::MessageExts::ClassMethods
+
+      # A message type used to describe a single precondition failure.
+      # @!attribute [rw] type
+      #   @return [::String]
+      #     The type of PreconditionFailure. We recommend using a service-specific
+      #     enum type to define the supported precondition violation subjects. For
+      #     example, "TOS" for "Terms of Service violation".
+      # @!attribute [rw] subject
+      #   @return [::String]
+      #     The subject, relative to the type, that failed.
+      #     For example, "google.com/cloud" relative to the "TOS" type would indicate
+      #     which terms of service is being referenced.
+      # @!attribute [rw] description
+      #   @return [::String]
+      #     A description of how the precondition failed. Developers can use this
+      #     description to understand how to fix the failure.
+      #
+      #     For example: "Terms of service not accepted".
+      class Violation
+        include ::Google::Protobuf::MessageExts
+        extend ::Google::Protobuf::MessageExts::ClassMethods
+      end
+    end
+
+    # Describes violations in a client request. This error type focuses on the
+    # syntactic aspects of the request.
+    # @!attribute [rw] field_violations
+    #   @return [::Array<::Google::Rpc::BadRequest::FieldViolation>]
+    #     Describes all violations in a client request.
+    class BadRequest
+      include ::Google::Protobuf::MessageExts
+      extend ::Google::Protobuf::MessageExts::ClassMethods
+
+      # A message type used to describe a single bad request field.
+      # @!attribute [rw] field
+      #   @return [::String]
+      #     A path leading to a field in the request body. The value will be a
+      #     sequence of dot-separated identifiers that identify a protocol buffer
+      #     field. E.g., "field_violations.field" would identify this field.
+      # @!attribute [rw] description
+      #   @return [::String]
+      #     A description of why the request element is bad.
+      class FieldViolation
+        include ::Google::Protobuf::MessageExts
+        extend ::Google::Protobuf::MessageExts::ClassMethods
+      end
+    end
+
+    # Contains metadata about the request that clients can attach when filing a bug
+    # or providing other forms of feedback.
+    # @!attribute [rw] request_id
+    #   @return [::String]
+    #     An opaque string that should only be interpreted by the service generating
+    #     it. For example, it can be used to identify requests in the service's logs.
+    # @!attribute [rw] serving_data
+    #   @return [::String]
+    #     Any data that was used to serve this request. For example, an encrypted
+    #     stack trace that can be sent back to the service provider for debugging.
+    class RequestInfo
+      include ::Google::Protobuf::MessageExts
+      extend ::Google::Protobuf::MessageExts::ClassMethods
+    end
+
+    # Describes the resource that is being accessed.
+    # @!attribute [rw] resource_type
+    #   @return [::String]
+    #     A name for the type of resource being accessed, e.g. "sql table",
+    #     "cloud storage bucket", "file", "Google calendar"; or the type URL
+    #     of the resource: e.g. "type.googleapis.com/google.pubsub.v1.Topic".
+    # @!attribute [rw] resource_name
+    #   @return [::String]
+    #     The name of the resource being accessed.  For example, a shared calendar
+    #     name: "example.com_4fghdhgsrgh@group.calendar.google.com", if the current
+    #     error is [google.rpc.Code.PERMISSION_DENIED][google.rpc.Code.PERMISSION_DENIED].
+    # @!attribute [rw] owner
+    #   @return [::String]
+    #     The owner of the resource (optional).
+    #     For example, "user:<owner email>" or "project:<Google developer project
+    #     id>".
+    # @!attribute [rw] description
+    #   @return [::String]
+    #     Describes what error is encountered when accessing this resource.
+    #     For example, updating a cloud project may require the `writer` permission
+    #     on the developer console project.
+    class ResourceInfo
+      include ::Google::Protobuf::MessageExts
+      extend ::Google::Protobuf::MessageExts::ClassMethods
+    end
+
+    # Provides links to documentation or for performing an out of band action.
+    #
+    # For example, if a quota check failed with an error indicating the calling
+    # project hasn't enabled the accessed service, this can contain a URL pointing
+    # directly to the right place in the developer console to flip the bit.
+    # @!attribute [rw] links
+    #   @return [::Array<::Google::Rpc::Help::Link>]
+    #     URL(s) pointing to additional information on handling the current error.
+    class Help
+      include ::Google::Protobuf::MessageExts
+      extend ::Google::Protobuf::MessageExts::ClassMethods
+
+      # Describes a URL link.
+      # @!attribute [rw] description
+      #   @return [::String]
+      #     Describes what the link offers.
+      # @!attribute [rw] url
+      #   @return [::String]
+      #     The URL of the link.
+      class Link
+        include ::Google::Protobuf::MessageExts
+        extend ::Google::Protobuf::MessageExts::ClassMethods
+      end
+    end
+
+    # Provides a localized error message that is safe to return to the user
+    # which can be attached to an RPC error.
+    # @!attribute [rw] locale
+    #   @return [::String]
+    #     The locale used following the specification defined at
+    #     http://www.rfc-editor.org/rfc/bcp/bcp47.txt.
+    #     Examples are: "en-US", "fr-CH", "es-MX"
+    # @!attribute [rw] message
+    #   @return [::String]
+    #     The localized error message in the above locale.
+    class LocalizedMessage
+      include ::Google::Protobuf::MessageExts
+      extend ::Google::Protobuf::MessageExts::ClassMethods
+    end
+  end
+end