google-cloud-bigquery-data_transfer 0.9.0 → 1.0.0

data/lib/google/cloud/bigquery/data_transfer/v1/data_transfer_service_client_config.json

@@ -1,96 +0,0 @@
-{
-  "interfaces": {
-    "google.cloud.bigquery.datatransfer.v1.DataTransferService": {
-      "retry_codes": {
-        "idempotent": [
-          "DEADLINE_EXCEEDED",
-          "UNAVAILABLE"
-        ],
-        "non_idempotent": []
-      },
-      "retry_params": {
-        "default": {
-          "initial_retry_delay_millis": 100,
-          "retry_delay_multiplier": 1.3,
-          "max_retry_delay_millis": 60000,
-          "initial_rpc_timeout_millis": 20000,
-          "rpc_timeout_multiplier": 1.0,
-          "max_rpc_timeout_millis": 20000,
-          "total_timeout_millis": 600000
-        }
-      },
-      "methods": {
-        "GetDataSource": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "ListDataSources": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "CreateTransferConfig": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "UpdateTransferConfig": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "DeleteTransferConfig": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "GetTransferConfig": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "ListTransferConfigs": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "ScheduleTransferRuns": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "StartManualTransferRuns": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "GetTransferRun": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "DeleteTransferRun": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        },
-        "ListTransferRuns": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "ListTransferLogs": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "idempotent",
-          "retry_params_name": "default"
-        },
-        "CheckValidCreds": {
-          "timeout_millis": 60000,
-          "retry_codes_name": "non_idempotent",
-          "retry_params_name": "default"
-        }
-      }
-    }
-  }
-}

data/lib/google/cloud/bigquery/data_transfer/v1/data_transfer_services_pb.rb

@@ -1,87 +0,0 @@
-# Generated by the protocol buffer compiler.  DO NOT EDIT!
-# Source: google/cloud/bigquery/datatransfer/v1/datatransfer.proto for package 'google.cloud.bigquery.datatransfer.v1'
-# Original file comments:
-# Copyright 2018 Google Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-
-require 'grpc'
-require 'google/cloud/bigquery/data_transfer/v1/data_transfer_pb'
-
-module Google
-  module Cloud
-    module Bigquery
-      module DataTransfer
-        module V1
-          module DataTransferService
-            # The Google BigQuery Data Transfer Service API enables BigQuery users to
-            # configure the transfer of their data from other Google Products into BigQuery.
-            # This service contains methods that are end user exposed. It backs up the
-            # frontend.
-            class Service
-
-              include GRPC::GenericService
-
-              self.marshal_class_method = :encode
-              self.unmarshal_class_method = :decode
-              self.service_name = 'google.cloud.bigquery.datatransfer.v1.DataTransferService'
-
-              # Retrieves a supported data source and returns its settings,
-              # which can be used for UI rendering.
-              rpc :GetDataSource, GetDataSourceRequest, DataSource
-              # Lists supported data sources and returns their settings,
-              # which can be used for UI rendering.
-              rpc :ListDataSources, ListDataSourcesRequest, ListDataSourcesResponse
-              # Creates a new data transfer configuration.
-              rpc :CreateTransferConfig, CreateTransferConfigRequest, TransferConfig
-              # Updates a data transfer configuration.
-              # All fields must be set, even if they are not updated.
-              rpc :UpdateTransferConfig, UpdateTransferConfigRequest, TransferConfig
-              # Deletes a data transfer configuration,
-              # including any associated transfer runs and logs.
-              rpc :DeleteTransferConfig, DeleteTransferConfigRequest, Google::Protobuf::Empty
-              # Returns information about a data transfer config.
-              rpc :GetTransferConfig, GetTransferConfigRequest, TransferConfig
-              # Returns information about all data transfers in the project.
-              rpc :ListTransferConfigs, ListTransferConfigsRequest, ListTransferConfigsResponse
-              # Creates transfer runs for a time range [start_time, end_time].
-              # For each date - or whatever granularity the data source supports - in the
-              # range, one transfer run is created.
-              # Note that runs are created per UTC time in the time range.
-              rpc :ScheduleTransferRuns, ScheduleTransferRunsRequest, ScheduleTransferRunsResponse
-              # Returns information about the particular transfer run.
-              rpc :GetTransferRun, GetTransferRunRequest, TransferRun
-              # Deletes the specified transfer run.
-              rpc :DeleteTransferRun, DeleteTransferRunRequest, Google::Protobuf::Empty
-              # Returns information about running and completed jobs.
-              rpc :ListTransferRuns, ListTransferRunsRequest, ListTransferRunsResponse
-              # Returns user facing log messages for the data transfer run.
-              rpc :ListTransferLogs, ListTransferLogsRequest, ListTransferLogsResponse
-              # Returns true if valid credentials exist for the given data source and
-              # requesting user.
-              # Some data sources doesn't support service account, so we need to talk to
-              # them on behalf of the end user. This API just checks whether we have OAuth
-              # token for the particular user, which is a pre-requisite before user can
-              # create a transfer config.
-              rpc :CheckValidCreds, CheckValidCredsRequest, CheckValidCredsResponse
-            end
-
-            Stub = Service.rpc_stub_class
-          end
-        end
-      end
-    end
-  end
-end

data/lib/google/cloud/bigquery/data_transfer/v1/doc/google/cloud/bigquery/data_transfer/v1/data_transfer.rb

@@ -1,500 +0,0 @@
-# Copyright 2018 Google LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-module Google
-  module Cloud
-    module Bigquery
-      module DataTransfer
-        ##
-        # # BigQuery Data Transfer API Contents
-        #
-        # | Class | Description |
-        # | ----- | ----------- |
-        # | [DataTransferServiceClient][] | The Google BigQuery Data Transfer Service API enables BigQuery users to configure the transfer of their data from other Google Products into BigQuery. |
-        # | [Data Types][] | Data types for Google::Cloud::Bigquery::DataTransfer::V1 |
-        #
-        # [DataTransferServiceClient]: https://googleapis.dev/ruby/google-cloud-bigquery-data_transfer/latest/Google/Cloud/Bigquery/DataTransfer/V1/DataTransferServiceClient.html
-        #
-        module V1
-          # Represents a data source parameter with validation rules, so that
-          # parameters can be rendered in the UI. These parameters are given to us by
-          # supported data sources, and include all needed information for rendering
-          # and validation.
-          # Thus, whoever uses this api can decide to generate either generic ui,
-          # or custom data source specific forms.
-          # @!attribute [rw] param_id
-          #   @return [String]
-          #     Parameter identifier.
-          # @!attribute [rw] display_name
-          #   @return [String]
-          #     Parameter display name in the user interface.
-          # @!attribute [rw] description
-          #   @return [String]
-          #     Parameter description.
-          # @!attribute [rw] type
-          #   @return [Google::Cloud::Bigquery::DataTransfer::V1::DataSourceParameter::Type]
-          #     Parameter type.
-          # @!attribute [rw] required
-          #   @return [true, false]
-          #     Is parameter required.
-          # @!attribute [rw] repeated
-          #   @return [true, false]
-          #     Can parameter have multiple values.
-          # @!attribute [rw] validation_regex
-          #   @return [String]
-          #     Regular expression which can be used for parameter validation.
-          # @!attribute [rw] allowed_values
-          #   @return [Array<String>]
-          #     All possible values for the parameter.
-          # @!attribute [rw] min_value
-          #   @return [Google::Protobuf::DoubleValue]
-          #     For integer and double values specifies minimum allowed value.
-          # @!attribute [rw] max_value
-          #   @return [Google::Protobuf::DoubleValue]
-          #     For integer and double values specifies maxminum allowed value.
-          # @!attribute [rw] fields
-          #   @return [Array<Google::Cloud::Bigquery::DataTransfer::V1::DataSourceParameter>]
-          #     When parameter is a record, describes child fields.
-          # @!attribute [rw] validation_description
-          #   @return [String]
-          #     Description of the requirements for this field, in case the user input does
-          #     not fulfill the regex pattern or min/max values.
-          # @!attribute [rw] validation_help_url
-          #   @return [String]
-          #     URL to a help document to further explain the naming requirements.
-          # @!attribute [rw] immutable
-          #   @return [true, false]
-          #     Cannot be changed after initial creation.
-          # @!attribute [rw] recurse
-          #   @return [true, false]
-          #     If set to true, schema should be taken from the parent with the same
-          #     parameter_id. Only applicable when parameter type is RECORD.
-          class DataSourceParameter
-            # Parameter type.
-            module Type
-              # Type unspecified.
-              TYPE_UNSPECIFIED = 0
-
-              # String parameter.
-              STRING = 1
-
-              # Integer parameter (64-bits).
-              # Will be serialized to json as string.
-              INTEGER = 2
-
-              # Double precision floating point parameter.
-              DOUBLE = 3
-
-              # Boolean parameter.
-              BOOLEAN = 4
-
-              # Record parameter.
-              RECORD = 5
-
-              # Page ID for a Google+ Page.
-              PLUS_PAGE = 6
-            end
-          end
-
-          # Represents data source metadata. Metadata is sufficient to
-          # render UI and request proper OAuth tokens.
-          # @!attribute [rw] name
-          #   @return [String]
-          #     Data source resource name.
-          # @!attribute [rw] data_source_id
-          #   @return [String]
-          #     Data source id.
-          # @!attribute [rw] display_name
-          #   @return [String]
-          #     User friendly data source name.
-          # @!attribute [rw] description
-          #   @return [String]
-          #     User friendly data source description string.
-          # @!attribute [rw] client_id
-          #   @return [String]
-          #     Data source client id which should be used to receive refresh token.
-          #     When not supplied, no offline credentials are populated for data transfer.
-          # @!attribute [rw] scopes
-          #   @return [Array<String>]
-          #     Api auth scopes for which refresh token needs to be obtained. Only valid
-          #     when +client_id+ is specified. Ignored otherwise. These are scopes needed
-          #     by a data source to prepare data and ingest them into BigQuery,
-          #     e.g., https://www.googleapis.com/auth/bigquery
-          # @!attribute [rw] transfer_type
-          #   @return [Google::Cloud::Bigquery::DataTransfer::V1::TransferType]
-          #     Transfer type. Currently supports only batch transfers,
-          #     which are transfers that use the BigQuery batch APIs (load or
-          #     query) to ingest the data.
-          # @!attribute [rw] supports_multiple_transfers
-          #   @return [true, false]
-          #     Indicates whether the data source supports multiple transfers
-          #     to different BigQuery targets.
-          # @!attribute [rw] update_deadline_seconds
-          #   @return [Integer]
-          #     The number of seconds to wait for an update from the data source
-          #     before BigQuery marks the transfer as failed.
-          # @!attribute [rw] default_schedule
-          #   @return [String]
-          #     Default data transfer schedule.
-          #     Examples of valid schedules include:
-          #     +1st,3rd monday of month 15:30+,
-          #     +every wed,fri of jan,jun 13:15+, and
-          #     +first sunday of quarter 00:00+.
-          # @!attribute [rw] supports_custom_schedule
-          #   @return [true, false]
-          #     Specifies whether the data source supports a user defined schedule, or
-          #     operates on the default schedule.
-          #     When set to +true+, user can override default schedule.
-          # @!attribute [rw] parameters
-          #   @return [Array<Google::Cloud::Bigquery::DataTransfer::V1::DataSourceParameter>]
-          #     Data source parameters.
-          # @!attribute [rw] help_url
-          #   @return [String]
-          #     Url for the help document for this data source.
-          # @!attribute [rw] authorization_type
-          #   @return [Google::Cloud::Bigquery::DataTransfer::V1::DataSource::AuthorizationType]
-          #     Indicates the type of authorization.
-          # @!attribute [rw] data_refresh_type
-          #   @return [Google::Cloud::Bigquery::DataTransfer::V1::DataSource::DataRefreshType]
-          #     Specifies whether the data source supports automatic data refresh for the
-          #     past few days, and how it's supported.
-          #     For some data sources, data might not be complete until a few days later,
-          #     so it's useful to refresh data automatically.
-          # @!attribute [rw] default_data_refresh_window_days
-          #   @return [Integer]
-          #     Default data refresh window on days.
-          #     Only meaningful when +data_refresh_type+ = +SLIDING_WINDOW+.
-          # @!attribute [rw] manual_runs_disabled
-          #   @return [true, false]
-          #     Disables backfilling and manual run scheduling
-          #     for the data source.
-          # @!attribute [rw] minimum_schedule_interval
-          #   @return [Google::Protobuf::Duration]
-          #     The minimum interval for scheduler to schedule runs.
-          class DataSource
-            # The type of authorization needed for this data source.
-            module AuthorizationType
-              # Type unspecified.
-              AUTHORIZATION_TYPE_UNSPECIFIED = 0
-
-              # Use OAuth 2 authorization codes that can be exchanged
-              # for a refresh token on the backend.
-              AUTHORIZATION_CODE = 1
-
-              # Return an authorization code for a given Google+ page that can then be
-              # exchanged for a refresh token on the backend.
-              GOOGLE_PLUS_AUTHORIZATION_CODE = 2
-            end
-
-            # Represents how the data source supports data auto refresh.
-            module DataRefreshType
-              # The data source won't support data auto refresh, which is default value.
-              DATA_REFRESH_TYPE_UNSPECIFIED = 0
-
-              # The data source supports data auto refresh, and runs will be scheduled
-              # for the past few days. Does not allow custom values to be set for each
-              # transfer config.
-              SLIDING_WINDOW = 1
-
-              # The data source supports data auto refresh, and runs will be scheduled
-              # for the past few days. Allows custom values to be set for each transfer
-              # config.
-              CUSTOM_SLIDING_WINDOW = 2
-            end
-          end
-
-          # A request to get data source info.
-          # @!attribute [rw] name
-          #   @return [String]
-          #     The field will contain name of the resource requested, for example:
-          #     +projects/\\{project_id}/dataSources/\\{data_source_id}+
-          class GetDataSourceRequest; end
-
-          # Request to list supported data sources and their data transfer settings.
-          # @!attribute [rw] parent
-          #   @return [String]
-          #     The BigQuery project id for which data sources should be returned.
-          #     Must be in the form: +projects/\\{project_id}+
-          # @!attribute [rw] page_token
-          #   @return [String]
-          #     Pagination token, which can be used to request a specific page
-          #     of +ListDataSourcesRequest+ list results. For multiple-page
-          #     results, +ListDataSourcesResponse+ outputs
-          #     a +next_page+ token, which can be used as the
-          #     +page_token+ value to request the next page of list results.
-          # @!attribute [rw] page_size
-          #   @return [Integer]
-          #     Page size. The default page size is the maximum value of 1000 results.
-          class ListDataSourcesRequest; end
-
-          # Returns list of supported data sources and their metadata.
-          # @!attribute [rw] data_sources
-          #   @return [Array<Google::Cloud::Bigquery::DataTransfer::V1::DataSource>]
-          #     List of supported data sources and their transfer settings.
-          # @!attribute [rw] next_page_token
-          #   @return [String]
-          #     Output only. The next-pagination token. For multiple-page list results,
-          #     this token can be used as the
-          #     +ListDataSourcesRequest.page_token+
-          #     to request the next page of list results.
-          class ListDataSourcesResponse; end
-
-          # A request to create a data transfer configuration. If new credentials are
-          # needed for this transfer configuration, an authorization code must be
-          # provided. If an authorization code is provided, the transfer configuration
-          # will be associated with the user id corresponding to the
-          # authorization code. Otherwise, the transfer configuration will be associated
-          # with the calling user.
-          # @!attribute [rw] parent
-          #   @return [String]
-          #     The BigQuery project id where the transfer configuration should be created.
-          #     Must be in the format /projects/\\{project_id}/locations/\\{location_id}
-          #     If specified location and location of the destination bigquery dataset
-          #     do not match - the request will fail.
-          # @!attribute [rw] transfer_config
-          #   @return [Google::Cloud::Bigquery::DataTransfer::V1::TransferConfig]
-          #     Data transfer configuration to create.
-          # @!attribute [rw] authorization_code
-          #   @return [String]
-          #     Optional OAuth2 authorization code to use with this transfer configuration.
-          #     This is required if new credentials are needed, as indicated by
-          #     +CheckValidCreds+.
-          #     In order to obtain authorization_code, please make a
-          #     request to
-          #     https://www.gstatic.com/bigquerydatatransfer/oauthz/auth?client_id=<datatransferapiclientid>&scope=<data_source_scopes>&redirect_uri=<redirect_uri>
-          #
-          #     * client_id should be OAuth client_id of BigQuery DTS API for the given
-          #       data source returned by ListDataSources method.
-          #     * data_source_scopes are the scopes returned by ListDataSources method.
-          #     * redirect_uri is an optional parameter. If not specified, then
-          #       authorization code is posted to the opener of authorization flow window.
-          #       Otherwise it will be sent to the redirect uri. A special value of
-          #       urn:ietf:wg:oauth:2.0:oob means that authorization code should be
-          #       returned in the title bar of the browser, with the page text prompting
-          #       the user to copy the code and paste it in the application.
-          class CreateTransferConfigRequest; end
-
-          # A request to update a transfer configuration. To update the user id of the
-          # transfer configuration, an authorization code needs to be provided.
-          # @!attribute [rw] transfer_config
-          #   @return [Google::Cloud::Bigquery::DataTransfer::V1::TransferConfig]
-          #     Data transfer configuration to create.
-          # @!attribute [rw] authorization_code
-          #   @return [String]
-          #     Optional OAuth2 authorization code to use with this transfer configuration.
-          #     If it is provided, the transfer configuration will be associated with the
-          #     authorizing user.
-          #     In order to obtain authorization_code, please make a
-          #     request to
-          #     https://www.gstatic.com/bigquerydatatransfer/oauthz/auth?client_id=<datatransferapiclientid>&scope=<data_source_scopes>&redirect_uri=<redirect_uri>
-          #
-          #     * client_id should be OAuth client_id of BigQuery DTS API for the given
-          #       data source returned by ListDataSources method.
-          #     * data_source_scopes are the scopes returned by ListDataSources method.
-          #     * redirect_uri is an optional parameter. If not specified, then
-          #       authorization code is posted to the opener of authorization flow window.
-          #       Otherwise it will be sent to the redirect uri. A special value of
-          #       urn:ietf:wg:oauth:2.0:oob means that authorization code should be
-          #       returned in the title bar of the browser, with the page text prompting
-          #       the user to copy the code and paste it in the application.
-          # @!attribute [rw] update_mask
-          #   @return [Google::Protobuf::FieldMask]
-          #     Required list of fields to be updated in this request.
-          class UpdateTransferConfigRequest; end
-
-          # A request to get data transfer information.
-          # @!attribute [rw] name
-          #   @return [String]
-          #     The field will contain name of the resource requested, for example:
-          #     +projects/\\{project_id}/transferConfigs/\\{config_id}+
-          class GetTransferConfigRequest; end
-
-          # A request to delete data transfer information. All associated transfer runs
-          # and log messages will be deleted as well.
-          # @!attribute [rw] name
-          #   @return [String]
-          #     The field will contain name of the resource requested, for example:
-          #     +projects/\\{project_id}/transferConfigs/\\{config_id}+
-          class DeleteTransferConfigRequest; end
-
-          # A request to get data transfer run information.
-          # @!attribute [rw] name
-          #   @return [String]
-          #     The field will contain name of the resource requested, for example:
-          #     +projects/\\{project_id}/transferConfigs/\\{config_id}/runs/\\{run_id}+
-          class GetTransferRunRequest; end
-
-          # A request to delete data transfer run information.
-          # @!attribute [rw] name
-          #   @return [String]
-          #     The field will contain name of the resource requested, for example:
-          #     +projects/\\{project_id}/transferConfigs/\\{config_id}/runs/\\{run_id}+
-          class DeleteTransferRunRequest; end
-
-          # A request to list data transfers configured for a BigQuery project.
-          # @!attribute [rw] parent
-          #   @return [String]
-          #     The BigQuery project id for which data sources
-          #     should be returned: +projects/\\{project_id}+.
-          # @!attribute [rw] data_source_ids
-          #   @return [Array<String>]
-          #     When specified, only configurations of requested data sources are returned.
-          # @!attribute [rw] page_token
-          #   @return [String]
-          #     Pagination token, which can be used to request a specific page
-          #     of +ListTransfersRequest+ list results. For multiple-page
-          #     results, +ListTransfersResponse+ outputs
-          #     a +next_page+ token, which can be used as the
-          #     +page_token+ value to request the next page of list results.
-          # @!attribute [rw] page_size
-          #   @return [Integer]
-          #     Page size. The default page size is the maximum value of 1000 results.
-          class ListTransferConfigsRequest; end
-
-          # The returned list of pipelines in the project.
-          # @!attribute [rw] transfer_configs
-          #   @return [Array<Google::Cloud::Bigquery::DataTransfer::V1::TransferConfig>]
-          #     Output only. The stored pipeline transfer configurations.
-          # @!attribute [rw] next_page_token
-          #   @return [String]
-          #     Output only. The next-pagination token. For multiple-page list results,
-          #     this token can be used as the
-          #     +ListTransferConfigsRequest.page_token+
-          #     to request the next page of list results.
-          class ListTransferConfigsResponse; end
-
-          # A request to list data transfer runs. UI can use this method to show/filter
-          # specific data transfer runs. The data source can use this method to request
-          # all scheduled transfer runs.
-          # @!attribute [rw] parent
-          #   @return [String]
-          #     Name of transfer configuration for which transfer runs should be retrieved.
-          #     Format of transfer configuration resource name is:
-          #     +projects/\\{project_id}/transferConfigs/\\{config_id}+.
-          # @!attribute [rw] states
-          #   @return [Array<Google::Cloud::Bigquery::DataTransfer::V1::TransferState>]
-          #     When specified, only transfer runs with requested states are returned.
-          # @!attribute [rw] page_token
-          #   @return [String]
-          #     Pagination token, which can be used to request a specific page
-          #     of +ListTransferRunsRequest+ list results. For multiple-page
-          #     results, +ListTransferRunsResponse+ outputs
-          #     a +next_page+ token, which can be used as the
-          #     +page_token+ value to request the next page of list results.
-          # @!attribute [rw] page_size
-          #   @return [Integer]
-          #     Page size. The default page size is the maximum value of 1000 results.
-          # @!attribute [rw] run_attempt
-          #   @return [Google::Cloud::Bigquery::DataTransfer::V1::ListTransferRunsRequest::RunAttempt]
-          #     Indicates how run attempts are to be pulled.
-          class ListTransferRunsRequest
-            # Represents which runs should be pulled.
-            module RunAttempt
-              # All runs should be returned.
-              RUN_ATTEMPT_UNSPECIFIED = 0
-
-              # Only latest run per day should be returned.
-              LATEST = 1
-            end
-          end
-
-          # The returned list of pipelines in the project.
-          # @!attribute [rw] transfer_runs
-          #   @return [Array<Google::Cloud::Bigquery::DataTransfer::V1::TransferRun>]
-          #     Output only. The stored pipeline transfer runs.
-          # @!attribute [rw] next_page_token
-          #   @return [String]
-          #     Output only. The next-pagination token. For multiple-page list results,
-          #     this token can be used as the
-          #     +ListTransferRunsRequest.page_token+
-          #     to request the next page of list results.
-          class ListTransferRunsResponse; end
-
-          # A request to get user facing log messages associated with data transfer run.
-          # @!attribute [rw] parent
-          #   @return [String]
-          #     Transfer run name in the form:
-          #     +projects/\\{project_id}/transferConfigs/\\{config_Id}/runs/\\{run_id}+.
-          # @!attribute [rw] page_token
-          #   @return [String]
-          #     Pagination token, which can be used to request a specific page
-          #     of +ListTransferLogsRequest+ list results. For multiple-page
-          #     results, +ListTransferLogsResponse+ outputs
-          #     a +next_page+ token, which can be used as the
-          #     +page_token+ value to request the next page of list results.
-          # @!attribute [rw] page_size
-          #   @return [Integer]
-          #     Page size. The default page size is the maximum value of 1000 results.
-          # @!attribute [rw] message_types
-          #   @return [Array<Google::Cloud::Bigquery::DataTransfer::V1::TransferMessage::MessageSeverity>]
-          #     Message types to return. If not populated - INFO, WARNING and ERROR
-          #     messages are returned.
-          class ListTransferLogsRequest; end
-
-          # The returned list transfer run messages.
-          # @!attribute [rw] transfer_messages
-          #   @return [Array<Google::Cloud::Bigquery::DataTransfer::V1::TransferMessage>]
-          #     Output only. The stored pipeline transfer messages.
-          # @!attribute [rw] next_page_token
-          #   @return [String]
-          #     Output only. The next-pagination token. For multiple-page list results,
-          #     this token can be used as the
-          #     +GetTransferRunLogRequest.page_token+
-          #     to request the next page of list results.
-          class ListTransferLogsResponse; end
-
-          # A request to determine whether the user has valid credentials. This method
-          # is used to limit the number of OAuth popups in the user interface. The
-          # user id is inferred from the API call context.
-          # If the data source has the Google+ authorization type, this method
-          # returns false, as it cannot be determined whether the credentials are
-          # already valid merely based on the user id.
-          # @!attribute [rw] name
-          #   @return [String]
-          #     The data source in the form:
-          #     +projects/\\{project_id}/dataSources/\\{data_source_id}+
-          class CheckValidCredsRequest; end
-
-          # A response indicating whether the credentials exist and are valid.
-          # @!attribute [rw] has_valid_creds
-          #   @return [true, false]
-          #     If set to +true+, the credentials exist and are valid.
-          class CheckValidCredsResponse; end
-
-          # A request to schedule transfer runs for a time range.
-          # @!attribute [rw] parent
-          #   @return [String]
-          #     Transfer configuration name in the form:
-          #     +projects/\\{project_id}/transferConfigs/\\{config_id}+.
-          # @!attribute [rw] start_time
-          #   @return [Google::Protobuf::Timestamp]
-          #     Start time of the range of transfer runs. For example,
-          #     +"2017-05-25T00:00:00+00:00"+.
-          # @!attribute [rw] end_time
-          #   @return [Google::Protobuf::Timestamp]
-          #     End time of the range of transfer runs. For example,
-          #     +"2017-05-30T00:00:00+00:00"+.
-          class ScheduleTransferRunsRequest; end
-
-          # A response to schedule transfer runs for a time range.
-          # @!attribute [rw] runs
-          #   @return [Array<Google::Cloud::Bigquery::DataTransfer::V1::TransferRun>]
-          #     The transfer runs that were scheduled.
-          class ScheduleTransferRunsResponse; end
-        end
-      end
-    end
-  end
-end