google-apis-compute_v1 0.111.0 → 0.113.0

data/lib/google/apis/compute_v1/service.rb

@@ -10862,6 +10862,70 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
+        # Flags the specified instances in the managed instance group to be resumed.
+        # This method increases the targetSize and decreases the targetSuspendedSize of
+        # the managed instance group by the number of instances that you resume. The
+        # resumeInstances operation is marked DONE if the resumeInstances request is
+        # successful. The underlying actions take additional time. You must separately
+        # verify the status of the RESUMING action with the listmanagedinstances method.
+        # In this request, you can only specify instances that are suspended. For
+        # example, if an instance was previously suspended using the suspendInstances
+        # method, it can be resumed using the resumeInstances method. If a health check
+        # is attached to the managed instance group, the specified instances will be
+        # verified as healthy after they are resumed. You can specify a maximum of 1000
+        # instances with this method per request.
+        # @param [String] project
+        #   Project ID for this request.
+        # @param [String] zone
+        #   The name of the zone where the managed instance group is located.
+        # @param [String] instance_group_manager
+        #   The name of the managed instance group.
+        # @param [Google::Apis::ComputeV1::InstanceGroupManagersResumeInstancesRequest] instance_group_managers_resume_instances_request_object
+        # @param [String] request_id
+        #   An optional request ID to identify requests. Specify a unique request ID so
+        #   that if you must retry your request, the server will know to ignore the
+        #   request if it has already been completed. For example, consider a situation
+        #   where you make an initial request and the request times out. If you make the
+        #   request again with the same request ID, the server can check if original
+        #   operation with the same request ID was received, and if so, will ignore the
+        #   second request. This prevents clients from accidentally creating duplicate
+        #   commitments. The request ID must be a valid UUID with the exception that zero
+        #   UUID is not supported ( 00000000-0000-0000-0000-000000000000).
+        # @param [String] fields
+        #   Selector specifying which fields to include in a partial response.
+        # @param [String] quota_user
+        #   Available to use for quota purposes for server-side applications. Can be any
+        #   arbitrary string assigned to a user, but should not exceed 40 characters.
+        # @param [String] user_ip
+        #   Legacy name for parameter that has been superseded by `quotaUser`.
+        # @param [Google::Apis::RequestOptions] options
+        #   Request-specific options
+        #
+        # @yield [result, err] Result & error if block supplied
+        # @yieldparam result [Google::Apis::ComputeV1::Operation] parsed result object
+        # @yieldparam err [StandardError] error object if request failed
+        #
+        # @return [Google::Apis::ComputeV1::Operation]
+        #
+        # @raise [Google::Apis::ServerError] An error occurred on the server and the request can be retried
+        # @raise [Google::Apis::ClientError] The request is invalid and should not be retried without modification
+        # @raise [Google::Apis::AuthorizationError] Authorization is required
+        def resume_instance_group_manager_instances(project, zone, instance_group_manager, instance_group_managers_resume_instances_request_object = nil, request_id: nil, fields: nil, quota_user: nil, user_ip: nil, options: nil, &block)
+          command = make_simple_command(:post, 'projects/{project}/zones/{zone}/instanceGroupManagers/{instanceGroupManager}/resumeInstances', options)
+          command.request_representation = Google::Apis::ComputeV1::InstanceGroupManagersResumeInstancesRequest::Representation
+          command.request_object = instance_group_managers_resume_instances_request_object
+          command.response_representation = Google::Apis::ComputeV1::Operation::Representation
+          command.response_class = Google::Apis::ComputeV1::Operation
+          command.params['project'] = project unless project.nil?
+          command.params['zone'] = zone unless zone.nil?
+          command.params['instanceGroupManager'] = instance_group_manager unless instance_group_manager.nil?
+          command.query['requestId'] = request_id unless request_id.nil?
+          command.query['fields'] = fields unless fields.nil?
+          command.query['quotaUser'] = quota_user unless quota_user.nil?
+          command.query['userIp'] = user_ip unless user_ip.nil?
+          execute_or_queue_command(command, &block)
+        end
+        
         # Specifies the instance template to use when creating new instances in this
         # group. The templates for existing instances in the group do not change unless
         # you run recreateInstances, run applyUpdatesToInstances, or set the group's
@@ -10976,6 +11040,210 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
+        # Flags the specified instances in the managed instance group to be started.
+        # This method increases the targetSize and decreases the targetStoppedSize of
+        # the managed instance group by the number of instances that you start. The
+        # startInstances operation is marked DONE if the startInstances request is
+        # successful. The underlying actions take additional time. You must separately
+        # verify the status of the STARTING action with the listmanagedinstances method.
+        # In this request, you can only specify instances that are stopped. For example,
+        # if an instance was previously stopped using the stopInstances method, it can
+        # be started using the startInstances method. If a health check is attached to
+        # the managed instance group, the specified instances will be verified as
+        # healthy after they are started. You can specify a maximum of 1000 instances
+        # with this method per request.
+        # @param [String] project
+        #   Project ID for this request.
+        # @param [String] zone
+        #   The name of the zone where the managed instance group is located.
+        # @param [String] instance_group_manager
+        #   The name of the managed instance group.
+        # @param [Google::Apis::ComputeV1::InstanceGroupManagersStartInstancesRequest] instance_group_managers_start_instances_request_object
+        # @param [String] request_id
+        #   An optional request ID to identify requests. Specify a unique request ID so
+        #   that if you must retry your request, the server will know to ignore the
+        #   request if it has already been completed. For example, consider a situation
+        #   where you make an initial request and the request times out. If you make the
+        #   request again with the same request ID, the server can check if original
+        #   operation with the same request ID was received, and if so, will ignore the
+        #   second request. This prevents clients from accidentally creating duplicate
+        #   commitments. The request ID must be a valid UUID with the exception that zero
+        #   UUID is not supported ( 00000000-0000-0000-0000-000000000000).
+        # @param [String] fields
+        #   Selector specifying which fields to include in a partial response.
+        # @param [String] quota_user
+        #   Available to use for quota purposes for server-side applications. Can be any
+        #   arbitrary string assigned to a user, but should not exceed 40 characters.
+        # @param [String] user_ip
+        #   Legacy name for parameter that has been superseded by `quotaUser`.
+        # @param [Google::Apis::RequestOptions] options
+        #   Request-specific options
+        #
+        # @yield [result, err] Result & error if block supplied
+        # @yieldparam result [Google::Apis::ComputeV1::Operation] parsed result object
+        # @yieldparam err [StandardError] error object if request failed
+        #
+        # @return [Google::Apis::ComputeV1::Operation]
+        #
+        # @raise [Google::Apis::ServerError] An error occurred on the server and the request can be retried
+        # @raise [Google::Apis::ClientError] The request is invalid and should not be retried without modification
+        # @raise [Google::Apis::AuthorizationError] Authorization is required
+        def start_instance_group_manager_instances(project, zone, instance_group_manager, instance_group_managers_start_instances_request_object = nil, request_id: nil, fields: nil, quota_user: nil, user_ip: nil, options: nil, &block)
+          command = make_simple_command(:post, 'projects/{project}/zones/{zone}/instanceGroupManagers/{instanceGroupManager}/startInstances', options)
+          command.request_representation = Google::Apis::ComputeV1::InstanceGroupManagersStartInstancesRequest::Representation
+          command.request_object = instance_group_managers_start_instances_request_object
+          command.response_representation = Google::Apis::ComputeV1::Operation::Representation
+          command.response_class = Google::Apis::ComputeV1::Operation
+          command.params['project'] = project unless project.nil?
+          command.params['zone'] = zone unless zone.nil?
+          command.params['instanceGroupManager'] = instance_group_manager unless instance_group_manager.nil?
+          command.query['requestId'] = request_id unless request_id.nil?
+          command.query['fields'] = fields unless fields.nil?
+          command.query['quotaUser'] = quota_user unless quota_user.nil?
+          command.query['userIp'] = user_ip unless user_ip.nil?
+          execute_or_queue_command(command, &block)
+        end
+        
+        # Flags the specified instances in the managed instance group to be immediately
+        # stopped. You can only specify instances that are running in this request. This
+        # method reduces the targetSize and increases the targetStoppedSize of the
+        # managed instance group by the number of instances that you stop. The
+        # stopInstances operation is marked DONE if the stopInstances request is
+        # successful. The underlying actions take additional time. You must separately
+        # verify the status of the STOPPING action with the listmanagedinstances method.
+        # If the standbyPolicy.initialDelaySec field is set, the group delays stopping
+        # the instances until initialDelaySec have passed from instance.
+        # creationTimestamp (that is, when the instance was created). This delay gives
+        # your application time to set itself up and initialize on the instance. If more
+        # than initialDelaySec seconds have passed since instance.creationTimestamp when
+        # this method is called, there will be zero delay. If the group is part of a
+        # backend service that has enabled connection draining, it can take up to 60
+        # seconds after the connection draining duration has elapsed before the VM
+        # instance is stopped. Stopped instances can be started using the startInstances
+        # method. You can specify a maximum of 1000 instances with this method per
+        # request.
+        # @param [String] project
+        #   Project ID for this request.
+        # @param [String] zone
+        #   The name of the zone where the managed instance group is located.
+        # @param [String] instance_group_manager
+        #   The name of the managed instance group.
+        # @param [Google::Apis::ComputeV1::InstanceGroupManagersStopInstancesRequest] instance_group_managers_stop_instances_request_object
+        # @param [String] request_id
+        #   An optional request ID to identify requests. Specify a unique request ID so
+        #   that if you must retry your request, the server will know to ignore the
+        #   request if it has already been completed. For example, consider a situation
+        #   where you make an initial request and the request times out. If you make the
+        #   request again with the same request ID, the server can check if original
+        #   operation with the same request ID was received, and if so, will ignore the
+        #   second request. This prevents clients from accidentally creating duplicate
+        #   commitments. The request ID must be a valid UUID with the exception that zero
+        #   UUID is not supported ( 00000000-0000-0000-0000-000000000000).
+        # @param [String] fields
+        #   Selector specifying which fields to include in a partial response.
+        # @param [String] quota_user
+        #   Available to use for quota purposes for server-side applications. Can be any
+        #   arbitrary string assigned to a user, but should not exceed 40 characters.
+        # @param [String] user_ip
+        #   Legacy name for parameter that has been superseded by `quotaUser`.
+        # @param [Google::Apis::RequestOptions] options
+        #   Request-specific options
+        #
+        # @yield [result, err] Result & error if block supplied
+        # @yieldparam result [Google::Apis::ComputeV1::Operation] parsed result object
+        # @yieldparam err [StandardError] error object if request failed
+        #
+        # @return [Google::Apis::ComputeV1::Operation]
+        #
+        # @raise [Google::Apis::ServerError] An error occurred on the server and the request can be retried
+        # @raise [Google::Apis::ClientError] The request is invalid and should not be retried without modification
+        # @raise [Google::Apis::AuthorizationError] Authorization is required
+        def stop_instance_group_manager_instances(project, zone, instance_group_manager, instance_group_managers_stop_instances_request_object = nil, request_id: nil, fields: nil, quota_user: nil, user_ip: nil, options: nil, &block)
+          command = make_simple_command(:post, 'projects/{project}/zones/{zone}/instanceGroupManagers/{instanceGroupManager}/stopInstances', options)
+          command.request_representation = Google::Apis::ComputeV1::InstanceGroupManagersStopInstancesRequest::Representation
+          command.request_object = instance_group_managers_stop_instances_request_object
+          command.response_representation = Google::Apis::ComputeV1::Operation::Representation
+          command.response_class = Google::Apis::ComputeV1::Operation
+          command.params['project'] = project unless project.nil?
+          command.params['zone'] = zone unless zone.nil?
+          command.params['instanceGroupManager'] = instance_group_manager unless instance_group_manager.nil?
+          command.query['requestId'] = request_id unless request_id.nil?
+          command.query['fields'] = fields unless fields.nil?
+          command.query['quotaUser'] = quota_user unless quota_user.nil?
+          command.query['userIp'] = user_ip unless user_ip.nil?
+          execute_or_queue_command(command, &block)
+        end
+        
+        # Flags the specified instances in the managed instance group to be immediately
+        # suspended. You can only specify instances that are running in this request.
+        # This method reduces the targetSize and increases the targetSuspendedSize of
+        # the managed instance group by the number of instances that you suspend. The
+        # suspendInstances operation is marked DONE if the suspendInstances request is
+        # successful. The underlying actions take additional time. You must separately
+        # verify the status of the SUSPENDING action with the listmanagedinstances
+        # method. If the standbyPolicy.initialDelaySec field is set, the group delays
+        # suspension of the instances until initialDelaySec have passed from instance.
+        # creationTimestamp (that is, when the instance was created). This delay gives
+        # your application time to set itself up and initialize on the instance. If more
+        # than initialDelaySec seconds have passed since instance.creationTimestamp when
+        # this method is called, there will be zero delay. If the group is part of a
+        # backend service that has enabled connection draining, it can take up to 60
+        # seconds after the connection draining duration has elapsed before the VM
+        # instance is suspended. Suspended instances can be resumed using the
+        # resumeInstances method. You can specify a maximum of 1000 instances with this
+        # method per request.
+        # @param [String] project
+        #   Project ID for this request.
+        # @param [String] zone
+        #   The name of the zone where the managed instance group is located.
+        # @param [String] instance_group_manager
+        #   The name of the managed instance group.
+        # @param [Google::Apis::ComputeV1::InstanceGroupManagersSuspendInstancesRequest] instance_group_managers_suspend_instances_request_object
+        # @param [String] request_id
+        #   An optional request ID to identify requests. Specify a unique request ID so
+        #   that if you must retry your request, the server will know to ignore the
+        #   request if it has already been completed. For example, consider a situation
+        #   where you make an initial request and the request times out. If you make the
+        #   request again with the same request ID, the server can check if original
+        #   operation with the same request ID was received, and if so, will ignore the
+        #   second request. This prevents clients from accidentally creating duplicate
+        #   commitments. The request ID must be a valid UUID with the exception that zero
+        #   UUID is not supported ( 00000000-0000-0000-0000-000000000000).
+        # @param [String] fields
+        #   Selector specifying which fields to include in a partial response.
+        # @param [String] quota_user
+        #   Available to use for quota purposes for server-side applications. Can be any
+        #   arbitrary string assigned to a user, but should not exceed 40 characters.
+        # @param [String] user_ip
+        #   Legacy name for parameter that has been superseded by `quotaUser`.
+        # @param [Google::Apis::RequestOptions] options
+        #   Request-specific options
+        #
+        # @yield [result, err] Result & error if block supplied
+        # @yieldparam result [Google::Apis::ComputeV1::Operation] parsed result object
+        # @yieldparam err [StandardError] error object if request failed
+        #
+        # @return [Google::Apis::ComputeV1::Operation]
+        #
+        # @raise [Google::Apis::ServerError] An error occurred on the server and the request can be retried
+        # @raise [Google::Apis::ClientError] The request is invalid and should not be retried without modification
+        # @raise [Google::Apis::AuthorizationError] Authorization is required
+        def suspend_instance_group_manager_instances(project, zone, instance_group_manager, instance_group_managers_suspend_instances_request_object = nil, request_id: nil, fields: nil, quota_user: nil, user_ip: nil, options: nil, &block)
+          command = make_simple_command(:post, 'projects/{project}/zones/{zone}/instanceGroupManagers/{instanceGroupManager}/suspendInstances', options)
+          command.request_representation = Google::Apis::ComputeV1::InstanceGroupManagersSuspendInstancesRequest::Representation
+          command.request_object = instance_group_managers_suspend_instances_request_object
+          command.response_representation = Google::Apis::ComputeV1::Operation::Representation
+          command.response_class = Google::Apis::ComputeV1::Operation
+          command.params['project'] = project unless project.nil?
+          command.params['zone'] = zone unless zone.nil?
+          command.params['instanceGroupManager'] = instance_group_manager unless instance_group_manager.nil?
+          command.query['requestId'] = request_id unless request_id.nil?
+          command.query['fields'] = fields unless fields.nil?
+          command.query['quotaUser'] = quota_user unless quota_user.nil?
+          command.query['userIp'] = user_ip unless user_ip.nil?
+          execute_or_queue_command(command, &block)
+        end
+        
         # Inserts or updates per-instance configurations for the managed instance group.
         # perInstanceConfig.name serves as a key used to distinguish whether to perform
         # insert or patch.
@@ -19703,7 +19971,134 @@ module Google
           command.response_representation = Google::Apis::ComputeV1::TestPermissionsResponse::Representation
           command.response_class = Google::Apis::ComputeV1::TestPermissionsResponse
           command.params['project'] = project unless project.nil?
-          command.params['resource'] = resource unless resource.nil?
+          command.params['resource'] = resource unless resource.nil?
+          command.query['fields'] = fields unless fields.nil?
+          command.query['quotaUser'] = quota_user unless quota_user.nil?
+          command.query['userIp'] = user_ip unless user_ip.nil?
+          execute_or_queue_command(command, &block)
+        end
+        
+        # Returns the specified network profile.
+        # @param [String] project
+        #   Project ID for this request.
+        # @param [String] network_profile
+        #   Name of the network profile to return.
+        # @param [String] fields
+        #   Selector specifying which fields to include in a partial response.
+        # @param [String] quota_user
+        #   Available to use for quota purposes for server-side applications. Can be any
+        #   arbitrary string assigned to a user, but should not exceed 40 characters.
+        # @param [String] user_ip
+        #   Legacy name for parameter that has been superseded by `quotaUser`.
+        # @param [Google::Apis::RequestOptions] options
+        #   Request-specific options
+        #
+        # @yield [result, err] Result & error if block supplied
+        # @yieldparam result [Google::Apis::ComputeV1::NetworkProfile] parsed result object
+        # @yieldparam err [StandardError] error object if request failed
+        #
+        # @return [Google::Apis::ComputeV1::NetworkProfile]
+        #
+        # @raise [Google::Apis::ServerError] An error occurred on the server and the request can be retried
+        # @raise [Google::Apis::ClientError] The request is invalid and should not be retried without modification
+        # @raise [Google::Apis::AuthorizationError] Authorization is required
+        def get_network_profile(project, network_profile, fields: nil, quota_user: nil, user_ip: nil, options: nil, &block)
+          command = make_simple_command(:get, 'projects/{project}/global/networkProfiles/{networkProfile}', options)
+          command.response_representation = Google::Apis::ComputeV1::NetworkProfile::Representation
+          command.response_class = Google::Apis::ComputeV1::NetworkProfile
+          command.params['project'] = project unless project.nil?
+          command.params['networkProfile'] = network_profile unless network_profile.nil?
+          command.query['fields'] = fields unless fields.nil?
+          command.query['quotaUser'] = quota_user unless quota_user.nil?
+          command.query['userIp'] = user_ip unless user_ip.nil?
+          execute_or_queue_command(command, &block)
+        end
+        
+        # Retrieves a list of network profiles available to the specified project.
+        # @param [String] project
+        #   Project ID for this request.
+        # @param [String] filter
+        #   A filter expression that filters resources listed in the response. Most
+        #   Compute resources support two types of filter expressions: expressions that
+        #   support regular expressions and expressions that follow API improvement
+        #   proposal AIP-160. These two types of filter expressions cannot be mixed in one
+        #   request. If you want to use AIP-160, your expression must specify the field
+        #   name, an operator, and the value that you want to use for filtering. The value
+        #   must be a string, a number, or a boolean. The operator must be either `=`, `!=`
+        #   , `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute
+        #   Engine instances, you can exclude instances named `example-instance` by
+        #   specifying `name != example-instance`. The `:*` comparison can be used to test
+        #   whether a key has been defined. For example, to find all objects with `owner`
+        #   label use: ``` labels.owner:* ``` You can also filter nested fields. For
+        #   example, you could specify `scheduling.automaticRestart = false` to include
+        #   instances only if they are not scheduled for automatic restarts. You can use
+        #   filtering on nested fields to filter based on resource labels. To filter on
+        #   multiple expressions, provide each separate expression within parentheses. For
+        #   example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel
+        #   Skylake") ``` By default, each expression is an `AND` expression. However, you
+        #   can include `AND` and `OR` expressions explicitly. For example: ``` (
+        #   cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (
+        #   scheduling.automaticRestart = true) ``` If you want to use a regular
+        #   expression, use the `eq` (equal) or `ne` (not equal) operator against a single
+        #   un-parenthesized expression with or without quotes or against multiple
+        #   parenthesized expressions. Examples: `fieldname eq unquoted literal` `
+        #   fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(
+        #   fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is
+        #   interpreted as a regular expression using Google RE2 library syntax. The
+        #   literal value must match the entire field. For example, to filter for
+        #   instances that do not end with name "instance", you would use `name ne .*
+        #   instance`. You cannot combine constraints on multiple fields using regular
+        #   expressions.
+        # @param [Fixnum] max_results
+        #   The maximum number of results per page that should be returned. If the number
+        #   of available results is larger than `maxResults`, Compute Engine returns a `
+        #   nextPageToken` that can be used to get the next page of results in subsequent
+        #   list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
+        # @param [String] order_by
+        #   Sorts list results by a certain order. By default, results are returned in
+        #   alphanumerical order based on the resource name. You can also sort results in
+        #   descending order based on the creation timestamp using `orderBy="
+        #   creationTimestamp desc"`. This sorts results based on the `creationTimestamp`
+        #   field in reverse chronological order (newest result first). Use this to sort
+        #   resources like operations so that the newest operation is returned first.
+        #   Currently, only sorting by `name` or `creationTimestamp desc` is supported.
+        # @param [String] page_token
+        #   Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned
+        #   by a previous list request to get the next page of results.
+        # @param [Boolean] return_partial_success
+        #   Opt-in for partial success behavior which provides partial results in case of
+        #   failure. The default value is false. For example, when partial success
+        #   behavior is enabled, aggregatedList for a single zone scope either returns all
+        #   resources in the zone or no resources, with an error code.
+        # @param [String] fields
+        #   Selector specifying which fields to include in a partial response.
+        # @param [String] quota_user
+        #   Available to use for quota purposes for server-side applications. Can be any
+        #   arbitrary string assigned to a user, but should not exceed 40 characters.
+        # @param [String] user_ip
+        #   Legacy name for parameter that has been superseded by `quotaUser`.
+        # @param [Google::Apis::RequestOptions] options
+        #   Request-specific options
+        #
+        # @yield [result, err] Result & error if block supplied
+        # @yieldparam result [Google::Apis::ComputeV1::NetworkProfilesListResponse] parsed result object
+        # @yieldparam err [StandardError] error object if request failed
+        #
+        # @return [Google::Apis::ComputeV1::NetworkProfilesListResponse]
+        #
+        # @raise [Google::Apis::ServerError] An error occurred on the server and the request can be retried
+        # @raise [Google::Apis::ClientError] The request is invalid and should not be retried without modification
+        # @raise [Google::Apis::AuthorizationError] Authorization is required
+        def list_network_profiles(project, filter: nil, max_results: nil, order_by: nil, page_token: nil, return_partial_success: nil, fields: nil, quota_user: nil, user_ip: nil, options: nil, &block)
+          command = make_simple_command(:get, 'projects/{project}/global/networkProfiles', options)
+          command.response_representation = Google::Apis::ComputeV1::NetworkProfilesListResponse::Representation
+          command.response_class = Google::Apis::ComputeV1::NetworkProfilesListResponse
+          command.params['project'] = project unless project.nil?
+          command.query['filter'] = filter unless filter.nil?
+          command.query['maxResults'] = max_results unless max_results.nil?
+          command.query['orderBy'] = order_by unless order_by.nil?
+          command.query['pageToken'] = page_token unless page_token.nil?
+          command.query['returnPartialSuccess'] = return_partial_success unless return_partial_success.nil?
           command.query['fields'] = fields unless fields.nil?
           command.query['quotaUser'] = quota_user unless quota_user.nil?
           command.query['userIp'] = user_ip unless user_ip.nil?
@@ -28030,6 +28425,70 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
+        # Flags the specified instances in the managed instance group to be resumed.
+        # This method increases the targetSize and decreases the targetSuspendedSize of
+        # the managed instance group by the number of instances that you resume. The
+        # resumeInstances operation is marked DONE if the resumeInstances request is
+        # successful. The underlying actions take additional time. You must separately
+        # verify the status of the RESUMING action with the listmanagedinstances method.
+        # In this request, you can only specify instances that are suspended. For
+        # example, if an instance was previously suspended using the suspendInstances
+        # method, it can be resumed using the resumeInstances method. If a health check
+        # is attached to the managed instance group, the specified instances will be
+        # verified as healthy after they are resumed. You can specify a maximum of 1000
+        # instances with this method per request.
+        # @param [String] project
+        #   Project ID for this request.
+        # @param [String] region
+        #   Name of the region scoping this request.
+        # @param [String] instance_group_manager
+        #   Name of the managed instance group.
+        # @param [Google::Apis::ComputeV1::RegionInstanceGroupManagersResumeInstancesRequest] region_instance_group_managers_resume_instances_request_object
+        # @param [String] request_id
+        #   An optional request ID to identify requests. Specify a unique request ID so
+        #   that if you must retry your request, the server will know to ignore the
+        #   request if it has already been completed. For example, consider a situation
+        #   where you make an initial request and the request times out. If you make the
+        #   request again with the same request ID, the server can check if original
+        #   operation with the same request ID was received, and if so, will ignore the
+        #   second request. This prevents clients from accidentally creating duplicate
+        #   commitments. The request ID must be a valid UUID with the exception that zero
+        #   UUID is not supported ( 00000000-0000-0000-0000-000000000000).
+        # @param [String] fields
+        #   Selector specifying which fields to include in a partial response.
+        # @param [String] quota_user
+        #   Available to use for quota purposes for server-side applications. Can be any
+        #   arbitrary string assigned to a user, but should not exceed 40 characters.
+        # @param [String] user_ip
+        #   Legacy name for parameter that has been superseded by `quotaUser`.
+        # @param [Google::Apis::RequestOptions] options
+        #   Request-specific options
+        #
+        # @yield [result, err] Result & error if block supplied
+        # @yieldparam result [Google::Apis::ComputeV1::Operation] parsed result object
+        # @yieldparam err [StandardError] error object if request failed
+        #
+        # @return [Google::Apis::ComputeV1::Operation]
+        #
+        # @raise [Google::Apis::ServerError] An error occurred on the server and the request can be retried
+        # @raise [Google::Apis::ClientError] The request is invalid and should not be retried without modification
+        # @raise [Google::Apis::AuthorizationError] Authorization is required
+        def resume_region_instance_group_manager_instances(project, region, instance_group_manager, region_instance_group_managers_resume_instances_request_object = nil, request_id: nil, fields: nil, quota_user: nil, user_ip: nil, options: nil, &block)
+          command = make_simple_command(:post, 'projects/{project}/regions/{region}/instanceGroupManagers/{instanceGroupManager}/resumeInstances', options)
+          command.request_representation = Google::Apis::ComputeV1::RegionInstanceGroupManagersResumeInstancesRequest::Representation
+          command.request_object = region_instance_group_managers_resume_instances_request_object
+          command.response_representation = Google::Apis::ComputeV1::Operation::Representation
+          command.response_class = Google::Apis::ComputeV1::Operation
+          command.params['project'] = project unless project.nil?
+          command.params['region'] = region unless region.nil?
+          command.params['instanceGroupManager'] = instance_group_manager unless instance_group_manager.nil?
+          command.query['requestId'] = request_id unless request_id.nil?
+          command.query['fields'] = fields unless fields.nil?
+          command.query['quotaUser'] = quota_user unless quota_user.nil?
+          command.query['userIp'] = user_ip unless user_ip.nil?
+          execute_or_queue_command(command, &block)
+        end
+        
         # Sets the instance template to use when creating new instances or recreating
         # instances in this group. Existing instances are not affected.
         # @param [String] project
@@ -28138,6 +28597,210 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
+        # Flags the specified instances in the managed instance group to be started.
+        # This method increases the targetSize and decreases the targetStoppedSize of
+        # the managed instance group by the number of instances that you start. The
+        # startInstances operation is marked DONE if the startInstances request is
+        # successful. The underlying actions take additional time. You must separately
+        # verify the status of the STARTING action with the listmanagedinstances method.
+        # In this request, you can only specify instances that are stopped. For example,
+        # if an instance was previously stopped using the stopInstances method, it can
+        # be started using the startInstances method. If a health check is attached to
+        # the managed instance group, the specified instances will be verified as
+        # healthy after they are started. You can specify a maximum of 1000 instances
+        # with this method per request.
+        # @param [String] project
+        #   Project ID for this request.
+        # @param [String] region
+        #   Name of the region scoping this request.
+        # @param [String] instance_group_manager
+        #   Name of the managed instance group.
+        # @param [Google::Apis::ComputeV1::RegionInstanceGroupManagersStartInstancesRequest] region_instance_group_managers_start_instances_request_object
+        # @param [String] request_id
+        #   An optional request ID to identify requests. Specify a unique request ID so
+        #   that if you must retry your request, the server will know to ignore the
+        #   request if it has already been completed. For example, consider a situation
+        #   where you make an initial request and the request times out. If you make the
+        #   request again with the same request ID, the server can check if original
+        #   operation with the same request ID was received, and if so, will ignore the
+        #   second request. This prevents clients from accidentally creating duplicate
+        #   commitments. The request ID must be a valid UUID with the exception that zero
+        #   UUID is not supported ( 00000000-0000-0000-0000-000000000000).
+        # @param [String] fields
+        #   Selector specifying which fields to include in a partial response.
+        # @param [String] quota_user
+        #   Available to use for quota purposes for server-side applications. Can be any
+        #   arbitrary string assigned to a user, but should not exceed 40 characters.
+        # @param [String] user_ip
+        #   Legacy name for parameter that has been superseded by `quotaUser`.
+        # @param [Google::Apis::RequestOptions] options
+        #   Request-specific options
+        #
+        # @yield [result, err] Result & error if block supplied
+        # @yieldparam result [Google::Apis::ComputeV1::Operation] parsed result object
+        # @yieldparam err [StandardError] error object if request failed
+        #
+        # @return [Google::Apis::ComputeV1::Operation]
+        #
+        # @raise [Google::Apis::ServerError] An error occurred on the server and the request can be retried
+        # @raise [Google::Apis::ClientError] The request is invalid and should not be retried without modification
+        # @raise [Google::Apis::AuthorizationError] Authorization is required
+        def start_region_instance_group_manager_instances(project, region, instance_group_manager, region_instance_group_managers_start_instances_request_object = nil, request_id: nil, fields: nil, quota_user: nil, user_ip: nil, options: nil, &block)
+          command = make_simple_command(:post, 'projects/{project}/regions/{region}/instanceGroupManagers/{instanceGroupManager}/startInstances', options)
+          command.request_representation = Google::Apis::ComputeV1::RegionInstanceGroupManagersStartInstancesRequest::Representation
+          command.request_object = region_instance_group_managers_start_instances_request_object
+          command.response_representation = Google::Apis::ComputeV1::Operation::Representation
+          command.response_class = Google::Apis::ComputeV1::Operation
+          command.params['project'] = project unless project.nil?
+          command.params['region'] = region unless region.nil?
+          command.params['instanceGroupManager'] = instance_group_manager unless instance_group_manager.nil?
+          command.query['requestId'] = request_id unless request_id.nil?
+          command.query['fields'] = fields unless fields.nil?
+          command.query['quotaUser'] = quota_user unless quota_user.nil?
+          command.query['userIp'] = user_ip unless user_ip.nil?
+          execute_or_queue_command(command, &block)
+        end
+        
+        # Flags the specified instances in the managed instance group to be immediately
+        # stopped. You can only specify instances that are running in this request. This
+        # method reduces the targetSize and increases the targetStoppedSize of the
+        # managed instance group by the number of instances that you stop. The
+        # stopInstances operation is marked DONE if the stopInstances request is
+        # successful. The underlying actions take additional time. You must separately
+        # verify the status of the STOPPING action with the listmanagedinstances method.
+        # If the standbyPolicy.initialDelaySec field is set, the group delays stopping
+        # the instances until initialDelaySec have passed from instance.
+        # creationTimestamp (that is, when the instance was created). This delay gives
+        # your application time to set itself up and initialize on the instance. If more
+        # than initialDelaySec seconds have passed since instance.creationTimestamp when
+        # this method is called, there will be zero delay. If the group is part of a
+        # backend service that has enabled connection draining, it can take up to 60
+        # seconds after the connection draining duration has elapsed before the VM
+        # instance is stopped. Stopped instances can be started using the startInstances
+        # method. You can specify a maximum of 1000 instances with this method per
+        # request.
+        # @param [String] project
+        #   Project ID for this request.
+        # @param [String] region
+        #   Name of the region scoping this request.
+        # @param [String] instance_group_manager
+        #   The name of the managed instance group.
+        # @param [Google::Apis::ComputeV1::RegionInstanceGroupManagersStopInstancesRequest] region_instance_group_managers_stop_instances_request_object
+        # @param [String] request_id
+        #   An optional request ID to identify requests. Specify a unique request ID so
+        #   that if you must retry your request, the server will know to ignore the
+        #   request if it has already been completed. For example, consider a situation
+        #   where you make an initial request and the request times out. If you make the
+        #   request again with the same request ID, the server can check if original
+        #   operation with the same request ID was received, and if so, will ignore the
+        #   second request. This prevents clients from accidentally creating duplicate
+        #   commitments. The request ID must be a valid UUID with the exception that zero
+        #   UUID is not supported ( 00000000-0000-0000-0000-000000000000).
+        # @param [String] fields
+        #   Selector specifying which fields to include in a partial response.
+        # @param [String] quota_user
+        #   Available to use for quota purposes for server-side applications. Can be any
+        #   arbitrary string assigned to a user, but should not exceed 40 characters.
+        # @param [String] user_ip
+        #   Legacy name for parameter that has been superseded by `quotaUser`.
+        # @param [Google::Apis::RequestOptions] options
+        #   Request-specific options
+        #
+        # @yield [result, err] Result & error if block supplied
+        # @yieldparam result [Google::Apis::ComputeV1::Operation] parsed result object
+        # @yieldparam err [StandardError] error object if request failed
+        #
+        # @return [Google::Apis::ComputeV1::Operation]
+        #
+        # @raise [Google::Apis::ServerError] An error occurred on the server and the request can be retried
+        # @raise [Google::Apis::ClientError] The request is invalid and should not be retried without modification
+        # @raise [Google::Apis::AuthorizationError] Authorization is required
+        def stop_region_instance_group_manager_instances(project, region, instance_group_manager, region_instance_group_managers_stop_instances_request_object = nil, request_id: nil, fields: nil, quota_user: nil, user_ip: nil, options: nil, &block)
+          command = make_simple_command(:post, 'projects/{project}/regions/{region}/instanceGroupManagers/{instanceGroupManager}/stopInstances', options)
+          command.request_representation = Google::Apis::ComputeV1::RegionInstanceGroupManagersStopInstancesRequest::Representation
+          command.request_object = region_instance_group_managers_stop_instances_request_object
+          command.response_representation = Google::Apis::ComputeV1::Operation::Representation
+          command.response_class = Google::Apis::ComputeV1::Operation
+          command.params['project'] = project unless project.nil?
+          command.params['region'] = region unless region.nil?
+          command.params['instanceGroupManager'] = instance_group_manager unless instance_group_manager.nil?
+          command.query['requestId'] = request_id unless request_id.nil?
+          command.query['fields'] = fields unless fields.nil?
+          command.query['quotaUser'] = quota_user unless quota_user.nil?
+          command.query['userIp'] = user_ip unless user_ip.nil?
+          execute_or_queue_command(command, &block)
+        end
+        
+        # Flags the specified instances in the managed instance group to be immediately
+        # suspended. You can only specify instances that are running in this request.
+        # This method reduces the targetSize and increases the targetSuspendedSize of
+        # the managed instance group by the number of instances that you suspend. The
+        # suspendInstances operation is marked DONE if the suspendInstances request is
+        # successful. The underlying actions take additional time. You must separately
+        # verify the status of the SUSPENDING action with the listmanagedinstances
+        # method. If the standbyPolicy.initialDelaySec field is set, the group delays
+        # suspension of the instances until initialDelaySec have passed from instance.
+        # creationTimestamp (that is, when the instance was created). This delay gives
+        # your application time to set itself up and initialize on the instance. If more
+        # than initialDelaySec seconds have passed since instance.creationTimestamp when
+        # this method is called, there will be zero delay. If the group is part of a
+        # backend service that has enabled connection draining, it can take up to 60
+        # seconds after the connection draining duration has elapsed before the VM
+        # instance is suspended. Suspended instances can be resumed using the
+        # resumeInstances method. You can specify a maximum of 1000 instances with this
+        # method per request.
+        # @param [String] project
+        #   Project ID for this request.
+        # @param [String] region
+        #   Name of the region scoping this request.
+        # @param [String] instance_group_manager
+        #   Name of the managed instance group.
+        # @param [Google::Apis::ComputeV1::RegionInstanceGroupManagersSuspendInstancesRequest] region_instance_group_managers_suspend_instances_request_object
+        # @param [String] request_id
+        #   An optional request ID to identify requests. Specify a unique request ID so
+        #   that if you must retry your request, the server will know to ignore the
+        #   request if it has already been completed. For example, consider a situation
+        #   where you make an initial request and the request times out. If you make the
+        #   request again with the same request ID, the server can check if original
+        #   operation with the same request ID was received, and if so, will ignore the
+        #   second request. This prevents clients from accidentally creating duplicate
+        #   commitments. The request ID must be a valid UUID with the exception that zero
+        #   UUID is not supported ( 00000000-0000-0000-0000-000000000000).
+        # @param [String] fields
+        #   Selector specifying which fields to include in a partial response.
+        # @param [String] quota_user
+        #   Available to use for quota purposes for server-side applications. Can be any
+        #   arbitrary string assigned to a user, but should not exceed 40 characters.
+        # @param [String] user_ip
+        #   Legacy name for parameter that has been superseded by `quotaUser`.
+        # @param [Google::Apis::RequestOptions] options
+        #   Request-specific options
+        #
+        # @yield [result, err] Result & error if block supplied
+        # @yieldparam result [Google::Apis::ComputeV1::Operation] parsed result object
+        # @yieldparam err [StandardError] error object if request failed
+        #
+        # @return [Google::Apis::ComputeV1::Operation]
+        #
+        # @raise [Google::Apis::ServerError] An error occurred on the server and the request can be retried
+        # @raise [Google::Apis::ClientError] The request is invalid and should not be retried without modification
+        # @raise [Google::Apis::AuthorizationError] Authorization is required
+        def suspend_region_instance_group_manager_instances(project, region, instance_group_manager, region_instance_group_managers_suspend_instances_request_object = nil, request_id: nil, fields: nil, quota_user: nil, user_ip: nil, options: nil, &block)
+          command = make_simple_command(:post, 'projects/{project}/regions/{region}/instanceGroupManagers/{instanceGroupManager}/suspendInstances', options)
+          command.request_representation = Google::Apis::ComputeV1::RegionInstanceGroupManagersSuspendInstancesRequest::Representation
+          command.request_object = region_instance_group_managers_suspend_instances_request_object
+          command.response_representation = Google::Apis::ComputeV1::Operation::Representation
+          command.response_class = Google::Apis::ComputeV1::Operation
+          command.params['project'] = project unless project.nil?
+          command.params['region'] = region unless region.nil?
+          command.params['instanceGroupManager'] = instance_group_manager unless instance_group_manager.nil?
+          command.query['requestId'] = request_id unless request_id.nil?
+          command.query['fields'] = fields unless fields.nil?
+          command.query['quotaUser'] = quota_user unless quota_user.nil?
+          command.query['userIp'] = user_ip unless user_ip.nil?
+          execute_or_queue_command(command, &block)
+        end
+        
         # Inserts or updates per-instance configurations for the managed instance group.
         # perInstanceConfig.name serves as a key used to distinguish whether to perform
         # insert or patch.
@@ -31444,6 +32107,60 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
+        # Sets the labels on a security policy. To learn more about labels, read the
+        # Labeling Resources documentation.
+        # @param [String] project
+        #   Project ID for this request.
+        # @param [String] region
+        #   The region for this request.
+        # @param [String] resource
+        #   Name or id of the resource for this request.
+        # @param [Google::Apis::ComputeV1::RegionSetLabelsRequest] region_set_labels_request_object
+        # @param [String] request_id
+        #   An optional request ID to identify requests. Specify a unique request ID so
+        #   that if you must retry your request, the server will know to ignore the
+        #   request if it has already been completed. For example, consider a situation
+        #   where you make an initial request and the request times out. If you make the
+        #   request again with the same request ID, the server can check if original
+        #   operation with the same request ID was received, and if so, will ignore the
+        #   second request. This prevents clients from accidentally creating duplicate
+        #   commitments. The request ID must be a valid UUID with the exception that zero
+        #   UUID is not supported ( 00000000-0000-0000-0000-000000000000).
+        # @param [String] fields
+        #   Selector specifying which fields to include in a partial response.
+        # @param [String] quota_user
+        #   Available to use for quota purposes for server-side applications. Can be any
+        #   arbitrary string assigned to a user, but should not exceed 40 characters.
+        # @param [String] user_ip
+        #   Legacy name for parameter that has been superseded by `quotaUser`.
+        # @param [Google::Apis::RequestOptions] options
+        #   Request-specific options
+        #
+        # @yield [result, err] Result & error if block supplied
+        # @yieldparam result [Google::Apis::ComputeV1::Operation] parsed result object
+        # @yieldparam err [StandardError] error object if request failed
+        #
+        # @return [Google::Apis::ComputeV1::Operation]
+        #
+        # @raise [Google::Apis::ServerError] An error occurred on the server and the request can be retried
+        # @raise [Google::Apis::ClientError] The request is invalid and should not be retried without modification
+        # @raise [Google::Apis::AuthorizationError] Authorization is required
+        def set_region_security_policy_labels(project, region, resource, region_set_labels_request_object = nil, request_id: nil, fields: nil, quota_user: nil, user_ip: nil, options: nil, &block)
+          command = make_simple_command(:post, 'projects/{project}/regions/{region}/securityPolicies/{resource}/setLabels', options)
+          command.request_representation = Google::Apis::ComputeV1::RegionSetLabelsRequest::Representation
+          command.request_object = region_set_labels_request_object
+          command.response_representation = Google::Apis::ComputeV1::Operation::Representation
+          command.response_class = Google::Apis::ComputeV1::Operation
+          command.params['project'] = project unless project.nil?
+          command.params['region'] = region unless region.nil?
+          command.params['resource'] = resource unless resource.nil?
+          command.query['requestId'] = request_id unless request_id.nil?
+          command.query['fields'] = fields unless fields.nil?
+          command.query['quotaUser'] = quota_user unless quota_user.nil?
+          command.query['userIp'] = user_ip unless user_ip.nil?
+          execute_or_queue_command(command, &block)
+        end
+        
         # Deletes the specified SslCertificate resource in the region.
         # @param [String] project
         #   Project ID for this request.