google-apis-compute_beta 0.145.0 → 0.147.0

data/lib/google/apis/compute_beta/classes.rb

@@ -3341,7 +3341,8 @@ module Google
         # Specifies how to determine whether the backend of a load balancer can
         # handle additional traffic or is fully loaded. For usage guidelines, see
         # Connection balancing mode.
-        # Backends must use compatible balancing modes. For more information, see
+        # Backends must use compatible balancing modes. Backends of a backend
+        # service may use different balancing modes. For more information, see
         # Supported balancing modes and target capacity settings and
         # Restrictions and guidance for instance groups.
         # Note: Currently, if you use the API to configure incompatible balancing
@@ -3384,6 +3385,8 @@ module Google
       
         # This field designates whether this is a failover backend. More than one
         # failover backend can be configured for a given BackendService.
+        # This field can only be used for a regional external Passthrough Network
+        # Load Balancer or a regional internal Passthrough Network Load Balancer.
         # Corresponds to the JSON property `failover`
         # @return [Boolean]
         attr_accessor :failover
@@ -3501,6 +3504,12 @@ module Google
         # capacity, backends in this layer would be used and traffic would be
         # assigned based on the load balancing algorithm you use. This is the
         # default
+        # For global external Passthrough Network Load Balancers, the following
+        # restrictions apply:
+        # 
+        # - At most one backend can be marked as PREFERRED.
+        # - PREFERRED and DEFAULT backends cannot reside
+        # in the same Cloud region.
         # Corresponds to the JSON property `preference`
         # @return [String]
         attr_accessor :preference
@@ -3843,16 +3852,17 @@ module Google
         attr_accessor :cache_key_policy
       
         # Specifies the cache setting for all responses from this backend.
-        # The possible values are:USE_ORIGIN_HEADERS Requires the origin to set valid
-        # caching
+        # The possible values are:
+        # USE_ORIGIN_HEADERS Requires the origin to set valid caching
         # headers to cache content. Responses without these headers will not be
         # cached at Google's edge, and will require a full trip to the origin on
         # every request, potentially impacting performance and increasing load on
-        # the origin server.FORCE_CACHE_ALL Cache all content, ignoring any "private",
+        # the origin server.
+        # FORCE_CACHE_ALL Cache all content, ignoring any "private",
         # "no-store" or "no-cache" directives in Cache-Control response headers.
         # Warning: this may result in Cloud CDN caching private,
-        # per-user (user identifiable) content.CACHE_ALL_STATIC Automatically cache
-        # static content,
+        # per-user (user identifiable) content.
+        # CACHE_ALL_STATIC Automatically cache static content,
         # including common image formats, media (video and audio), and web assets
         # (JavaScript and CSS). Requests and responses that are marked as
         # uncacheable, as well as dynamic content (including HTML), will not be
@@ -4720,8 +4730,10 @@ module Google
         # haPolicy requires customers to be responsible for tracking backend
         # endpoint health and electing a leader among the healthy endpoints.
         # Therefore, haPolicy cannot be specified with healthChecks.
-        # haPolicy can only be specified for External Passthrough Network Load
-        # Balancers and Internal Passthrough Network Load Balancers.
+        # haPolicy can only be specified for External Passthrough
+        # Network Load Balancers and Internal Passthrough Network Load Balancers.
+        # haPolicy cannot be used by global external Passthrough Network
+        # Load Balancers.
         # Corresponds to the JSON property `haPolicy`
         # @return [Google::Apis::ComputeBeta::BackendServiceHaPolicy]
         attr_accessor :ha_policy
@@ -4791,8 +4803,8 @@ module Google
       
         # Specifies the load balancer type. A backend service
         # created for one type of load balancer cannot be used with another.
-        # For more information, refer toChoosing
-        # a load balancer.
+        # For more information, refer to
+        # Backend services product and scheme table.
         # Corresponds to the JSON property `loadBalancingScheme`
         # @return [String]
         attr_accessor :load_balancing_scheme
@@ -4840,27 +4852,32 @@ module Google
         # HTTP response header field Endpoint-Load-Metrics. The reported
         # metrics to use for computing the weights are specified via thecustomMetrics
         # field.
-        # 
+        # - WEIGHTED_MAGLEV: Per-endpoint weighted load balancing via
+        # health check reported weights. If set, the backend service must configure
+        # an HTTP-based Health Check, and health check replies are expected to
+        # contain the non-standard HTTP response header fieldX-Load-Balancing-
+        # Endpoint-Weight to specify the per-endpoint
+        # weights. If set, load balancing is weighted based on the per-endpoint
+        # weights reported in the last processed health check replies, as long as
+        # every instance either reported a valid weight or had UNAVAILABLE_WEIGHT.
+        # Otherwise, load balancing remains equal-weight.
         # This field is applicable to either:
+        # 
         # - A regional backend service with the service protocol set to HTTP,
         # HTTPS, HTTP2 or H2C, and load_balancing_scheme set to
         # INTERNAL_MANAGED.
         # - A global backend service with the
         # load_balancing_scheme set to INTERNAL_SELF_MANAGED, INTERNAL_MANAGED, or
         # EXTERNAL_MANAGED.
-        # 
-        # 
         # If sessionAffinity is not configured—that is, if session
         # affinity remains at the default value of NONE—then the
         # default value for localityLbPolicy
         # is ROUND_ROBIN. If session affinity is set to a value other
         # than NONE,
         # then the default value for localityLbPolicy isMAGLEV.
-        # 
         # Only ROUND_ROBIN and RING_HASH are supported
         # when the backend service is referenced by a URL map that is bound to
         # target gRPC proxy that has validateForProxyless field set to true.
-        # 
         # localityLbPolicy cannot be specified with haPolicy.
         # Corresponds to the JSON property `localityLbPolicy`
         # @return [String]
@@ -4952,12 +4969,12 @@ module Google
         # @return [String]
         attr_accessor :port_name
       
-        # The protocol this BackendService uses to communicate
-        # with backends.
-        # Possible values are HTTP, HTTPS, HTTP2, H2C, TCP, SSL, UDP or GRPC.
-        # depending on the chosen load balancer or Traffic Director configuration.
-        # Refer to the documentation for the load balancers or for Traffic Director
-        # for more information.
+        # The protocol this BackendService uses to communicate with backends.
+        # Possible values are HTTP, HTTPS, HTTP2, H2C, TCP, SSL, UDP, GRPC, or
+        # UNSPECIFIED, depending on the chosen load balancer or Traffic Director
+        # configuration.
+        # Refer to
+        # Load balancing features for more information.
         # Must be set to GRPC when the backend service is referenced by a URL map
         # that is bound to target gRPC proxy.
         # Corresponds to the JSON property `protocol`
@@ -5268,16 +5285,17 @@ module Google
         attr_accessor :cache_key_policy
       
         # Specifies the cache setting for all responses from this backend.
-        # The possible values are:USE_ORIGIN_HEADERS Requires the origin to set valid
-        # caching
+        # The possible values are:
+        # USE_ORIGIN_HEADERS Requires the origin to set valid caching
         # headers to cache content. Responses without these headers will not be
         # cached at Google's edge, and will require a full trip to the origin on
         # every request, potentially impacting performance and increasing load on
-        # the origin server.FORCE_CACHE_ALL Cache all content, ignoring any "private",
+        # the origin server.
+        # FORCE_CACHE_ALL Cache all content, ignoring any "private",
         # "no-store" or "no-cache" directives in Cache-Control response headers.
         # Warning: this may result in Cloud CDN caching private,
-        # per-user (user identifiable) content.CACHE_ALL_STATIC Automatically cache
-        # static content,
+        # per-user (user identifiable) content.
+        # CACHE_ALL_STATIC Automatically cache static content,
         # including common image formats, media (video and audio), and web assets
         # (JavaScript and CSS). Requests and responses that are marked as
         # uncacheable, as well as dynamic content (including HTML), will not be
@@ -8151,7 +8169,6 @@ module Google
         include Google::Apis::Core::Hashable
       
         # Specifies the type of the disk.
-        # This field must be set to SCRATCH.
         # Corresponds to the JSON property `type`
         # @return [String]
         attr_accessor :type
@@ -10583,6 +10600,342 @@ module Google
         end
       end
       
+      # A standalone, regional API resource that encapsulates a set of user-defined
+      # DHCP configurations.
+      class DhcpOptionsConfig
+        include Google::Apis::Core::Hashable
+      
+        # Mapping of user-defined keys to DhcpOptionsConfig to Network associations.
+        # Corresponds to the JSON property `associations`
+        # @return [Hash<String,Google::Apis::ComputeBeta::DhcpOptionsConfigAssociation>]
+        attr_accessor :associations
+      
+        # The file path and name of the boot image/file on the TFTP server that the
+        # client VM guest OS should download and execute during network boot. Used
+        # when the standard DHCP header 'file' field is overloaded. Corresponds to
+        # DHCPv4 Option 67.
+        # Corresponds to the JSON property `bootFileIpv4Name`
+        # @return [String]
+        attr_accessor :boot_file_ipv4_name
+      
+        # A list of UTF-8 encoded parameter strings to be passed as arguments to the
+        # bootloader program or OS kernel after downloading the boot file.
+        # Corresponds to DHCPv6 Option 60.
+        # Corresponds to the JSON property `bootFileIpv6Parameters`
+        # @return [Array<String>]
+        attr_accessor :boot_file_ipv6_parameters
+      
+        # The Uniform Resource Locator (URL) specifying the protocol, server address,
+        # and file path of the boot file that the client VM guest OS should download
+        # and execute for network boot (e.g., 'tftp://[2001:db8::1]/bootx64.efi' or
+        # 'http://[2001:db8::1]/boot.img'). Corresponds to DHCPv6 Option 59.
+        # Corresponds to the JSON property `bootFileIpv6Url`
+        # @return [String]
+        attr_accessor :boot_file_ipv6_url
+      
+        # Output only. [Output Only] Creation timestamp inRFC3339
+        # text format.
+        # Corresponds to the JSON property `creationTimestamp`
+        # @return [String]
+        attr_accessor :creation_timestamp
+      
+        # An optional description of this resource. Provide this property when you
+        # create the resource.
+        # Corresponds to the JSON property `description`
+        # @return [String]
+        attr_accessor :description
+      
+        # An ordered list of domain suffixes (search paths) that the client VM guest
+        # OS should append to resolve hostnames that are not fully qualified. Applies
+        # to both DHCPv4 Option 119 and DHCPv6 Option 24.
+        # Corresponds to the JSON property `dnsSearchPaths`
+        # @return [Array<String>]
+        attr_accessor :dns_search_paths
+      
+        # The domain name that the client VM guest OS should use when resolving
+        # hostnames via DNS (e.g., 'example.com'). It defines the default domain
+        # suffix for the client. Corresponds to DHCPv4 Option 15.
+        # Corresponds to the JSON property `domainName`
+        # @return [String]
+        attr_accessor :domain_name
+      
+        # Output only. [Output Only] The unique identifier for the resource type. The
+        # server
+        # generates this identifier.
+        # Corresponds to the JSON property `id`
+        # @return [Fixnum]
+        attr_accessor :id
+      
+        # Output only. [Output Only] Type of the resource. Alwayscompute#
+        # dhcpOptionsConfig for dhcp options configs.
+        # Corresponds to the JSON property `kind`
+        # @return [String]
+        attr_accessor :kind
+      
+        # The duration, in seconds, of the IPv4 address lease offered by the DHCP
+        # server to the client VM guest OS. Corresponds to DHCPv4 Option 51.
+        # Corresponds to the JSON property `leaseTimeSec`
+        # @return [Fixnum]
+        attr_accessor :lease_time_sec
+      
+        # Name of the resource. Provided by the client when the resource is created.
+        # The name must be 1-63 characters long, and comply withRFC1035.
+        # Specifically, the name must be 1-63 characters long and match the regular
+        # expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first
+        # character must be a lowercase letter, and all following characters must
+        # be a dash, lowercase letter, or digit, except the last character, which
+        # cannot be a dash.
+        # Corresponds to the JSON property `name`
+        # @return [String]
+        attr_accessor :name
+      
+        # An ordered list of IPv4 addresses of Network Time Protocol (NTP) servers
+        # available to the client VM guest OS for system clock synchronization,
+        # listed in order of preference. Corresponds to DHCPv4 Option 42.
+        # Corresponds to the JSON property `ntpServerIpv4Addresses`
+        # @return [Array<String>]
+        attr_accessor :ntp_server_ipv4_addresses
+      
+        # An ordered list of IPv6 addresses of Network Time Protocol (NTP) servers
+        # available to the client VM guest OS for system clock synchronization.
+        # Corresponds to DHCPv6 Option 56.
+        # Corresponds to the JSON property `ntpServerIpv6Addresses`
+        # @return [Array<String>]
+        attr_accessor :ntp_server_ipv6_addresses
+      
+        # Output only. [Output Only] URL of the region where the resource resides.
+        # Corresponds to the JSON property `region`
+        # @return [String]
+        attr_accessor :region
+      
+        # Output only. [Output Only] Server-defined URL for the resource.
+        # Corresponds to the JSON property `selfLink`
+        # @return [String]
+        attr_accessor :self_link
+      
+        # An ordered list of one or more IPv4 addresses of TFTP servers. Provides
+        # server redundancy and failover support, and is generally prioritized by
+        # clients over the single hostname specified in Option 66. Corresponds to
+        # DHCPv4 Option 150.
+        # Corresponds to the JSON property `tftpServerIpv4Addresses`
+        # @return [Array<String>]
+        attr_accessor :tftp_server_ipv4_addresses
+      
+        # The hostname or IP address of the Trivial File Transfer Protocol (TFTP)
+        # server from which the client VM guest OS can download boot files. Typically
+        # used in network booting (PXE) when the standard DHCP header 'sname' field
+        # is overloaded. Corresponds to DHCPv4 Option 66.
+        # Corresponds to the JSON property `tftpServerIpv4Name`
+        # @return [String]
+        attr_accessor :tftp_server_ipv4_name
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @associations = args[:associations] if args.key?(:associations)
+          @boot_file_ipv4_name = args[:boot_file_ipv4_name] if args.key?(:boot_file_ipv4_name)
+          @boot_file_ipv6_parameters = args[:boot_file_ipv6_parameters] if args.key?(:boot_file_ipv6_parameters)
+          @boot_file_ipv6_url = args[:boot_file_ipv6_url] if args.key?(:boot_file_ipv6_url)
+          @creation_timestamp = args[:creation_timestamp] if args.key?(:creation_timestamp)
+          @description = args[:description] if args.key?(:description)
+          @dns_search_paths = args[:dns_search_paths] if args.key?(:dns_search_paths)
+          @domain_name = args[:domain_name] if args.key?(:domain_name)
+          @id = args[:id] if args.key?(:id)
+          @kind = args[:kind] if args.key?(:kind)
+          @lease_time_sec = args[:lease_time_sec] if args.key?(:lease_time_sec)
+          @name = args[:name] if args.key?(:name)
+          @ntp_server_ipv4_addresses = args[:ntp_server_ipv4_addresses] if args.key?(:ntp_server_ipv4_addresses)
+          @ntp_server_ipv6_addresses = args[:ntp_server_ipv6_addresses] if args.key?(:ntp_server_ipv6_addresses)
+          @region = args[:region] if args.key?(:region)
+          @self_link = args[:self_link] if args.key?(:self_link)
+          @tftp_server_ipv4_addresses = args[:tftp_server_ipv4_addresses] if args.key?(:tftp_server_ipv4_addresses)
+          @tftp_server_ipv4_name = args[:tftp_server_ipv4_name] if args.key?(:tftp_server_ipv4_name)
+        end
+      end
+      
+      # Association represents the relationship between a DHCP options config and a
+      # network. Association represents the relationship between a DHCP options
+      # config and a network.
+      class DhcpOptionsConfigAssociation
+        include Google::Apis::Core::Hashable
+      
+        # Required. The target network this DHCP option is attached to.
+        # You can specify this as a full or partial URL. For example, the following
+        # are all valid URLs:
+        # 
+        # 
+        # - https://www.googleapis.com/compute/v1/projects/project/global/networks/
+        # network
+        # 
+        # - projects/project/global/networks/network
+        # Corresponds to the JSON property `network`
+        # @return [String]
+        attr_accessor :network
+      
+        # Output only. [Output Only] The server-defined ID of the associated Network.
+        # Corresponds to the JSON property `networkId`
+        # @return [Fixnum]
+        attr_accessor :network_id
+      
+        # Output only. [Output Only] State of the association.
+        # Corresponds to the JSON property `state`
+        # @return [String]
+        attr_accessor :state
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @network = args[:network] if args.key?(:network)
+          @network_id = args[:network_id] if args.key?(:network_id)
+          @state = args[:state] if args.key?(:state)
+        end
+      end
+      
+      # 
+      class DhcpOptionsConfigList
+        include Google::Apis::Core::Hashable
+      
+        # Server-defined ETag for optimistic concurrency control.
+        # Corresponds to the JSON property `etag`
+        # @return [String]
+        attr_accessor :etag
+      
+        # [Output Only] Unique identifier for the resource; defined by the server.
+        # Corresponds to the JSON property `id`
+        # @return [String]
+        attr_accessor :id
+      
+        # A list of DhcpOptionsConfig resources.
+        # Corresponds to the JSON property `items`
+        # @return [Array<Google::Apis::ComputeBeta::DhcpOptionsConfig>]
+        attr_accessor :items
+      
+        # Output only. [Output Only] Type of the resource. Alwayscompute#
+        # dhcpOptionsConfigList for a list of dhcp options
+        # configs.
+        # Corresponds to the JSON property `kind`
+        # @return [String]
+        attr_accessor :kind
+      
+        # [Output Only] This token allows you to get the next page of results for
+        # list requests. If the number of results is larger thanmaxResults, use the
+        # nextPageToken as a value for
+        # the query parameter pageToken in the next list request.
+        # Subsequent list requests will have their own nextPageToken to
+        # continue paging through the results.
+        # Corresponds to the JSON property `nextPageToken`
+        # @return [String]
+        attr_accessor :next_page_token
+      
+        # [Output Only] Server-defined URL for this resource.
+        # Corresponds to the JSON property `selfLink`
+        # @return [String]
+        attr_accessor :self_link
+      
+        # Output only. [Output Only] Unreachable resources.
+        # end_interface: MixerListResponseWithEtagBuilder
+        # Corresponds to the JSON property `unreachables`
+        # @return [Array<String>]
+        attr_accessor :unreachables
+      
+        # [Output Only] Informational warning message.
+        # Corresponds to the JSON property `warning`
+        # @return [Google::Apis::ComputeBeta::DhcpOptionsConfigList::Warning]
+        attr_accessor :warning
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @etag = args[:etag] if args.key?(:etag)
+          @id = args[:id] if args.key?(:id)
+          @items = args[:items] if args.key?(:items)
+          @kind = args[:kind] if args.key?(:kind)
+          @next_page_token = args[:next_page_token] if args.key?(:next_page_token)
+          @self_link = args[:self_link] if args.key?(:self_link)
+          @unreachables = args[:unreachables] if args.key?(:unreachables)
+          @warning = args[:warning] if args.key?(:warning)
+        end
+        
+        # [Output Only] Informational warning message.
+        class Warning
+          include Google::Apis::Core::Hashable
+        
+          # [Output Only] A warning code, if applicable. For example, Compute
+          # Engine returns NO_RESULTS_ON_PAGE if there
+          # are no results in the response.
+          # Corresponds to the JSON property `code`
+          # @return [String]
+          attr_accessor :code
+        
+          # [Output Only] Metadata about this warning in key:
+          # value format. For example:
+          # "data": [
+          # `
+          # "key": "scope",
+          # "value": "zones/us-east1-d"
+          # `]
+          # Corresponds to the JSON property `data`
+          # @return [Array<Google::Apis::ComputeBeta::DhcpOptionsConfigList::Warning::Datum>]
+          attr_accessor :data
+        
+          # [Output Only] A human-readable description of the warning code.
+          # Corresponds to the JSON property `message`
+          # @return [String]
+          attr_accessor :message
+        
+          def initialize(**args)
+             update!(**args)
+          end
+        
+          # Update properties of this object
+          def update!(**args)
+            @code = args[:code] if args.key?(:code)
+            @data = args[:data] if args.key?(:data)
+            @message = args[:message] if args.key?(:message)
+          end
+          
+          # 
+          class Datum
+            include Google::Apis::Core::Hashable
+          
+            # [Output Only] A key that provides more detail on the warning being
+            # returned. For example, for warnings where there are no results in a list
+            # request for a particular zone, this key might be scope and
+            # the key value might be the zone name. Other examples might be a key
+            # indicating a deprecated resource and a suggested replacement, or a
+            # warning about invalid network settings (for example, if an instance
+            # attempts to perform IP forwarding but is not enabled for IP forwarding).
+            # Corresponds to the JSON property `key`
+            # @return [String]
+            attr_accessor :key
+          
+            # [Output Only] A warning data value corresponding to the key.
+            # Corresponds to the JSON property `value`
+            # @return [String]
+            attr_accessor :value
+          
+            def initialize(**args)
+               update!(**args)
+            end
+          
+            # Update properties of this object
+            def update!(**args)
+              @key = args[:key] if args.key?(:key)
+              @value = args[:value] if args.key?(:value)
+            end
+          end
+        end
+      end
+      
       # Represents a Persistent Disk resource.
       # Google Compute Engine has two Disk resources:
       # * [Zonal](/compute/docs/reference/rest/beta/disks)
@@ -14737,6 +15090,7 @@ module Google
         # - regions/region/addresses/address-name
         # - global/addresses/address-name
         # - address-name
+        # The IP address can only be set at creation. Once set, it cannot be updated.
         # The forwarding rule's target or backendService,
         # and in most cases, also the loadBalancingScheme, determine the
         # type of IP address that you can use. For detailed information, see
@@ -14745,11 +15099,66 @@ module Google
         # concepts#ip_address_specifications).
         # When reading an IPAddress, the API always returns the IP
         # address number.
+        # When creating a global external Passthrough Network Load Balancer
+        # forwarding rule (a parent forwarding rule), you must use theIPAddresses field,
+        # but the Google Cloud generated child
+        # forwarding rules set the IPAddress field instead. Refer to
+        # theavailabilityGroup field for further details.
         # Corresponds to the JSON property `IPAddress`
         # @return [String]
         attr_accessor :ip_address
       
+        # IP addresses for which this forwarding rule accepts traffic. All IP
+        # addresses must have the same IP version, IPv4 or IPv6. When a client sends
+        # traffic that matches one of the specified IP addresses, protocol and ports,
+        # the forwarding rule directs the traffic to the referencedbackendService. All
+        # IP addresses are served by the same set of
+        # backends, and they share the target capacities specified in the backend
+        # service fairly.
+        # Global external Passthrough Network Load Balancer requires two IP addresses
+        # for each forwarding rule to provide high availability when both IP
+        # addresses are used to serve client requests. The two IP addresses must come
+        # from global IP pools that belong to two distinct Availability
+        # Groups, represented by the
+        # purposePASSTHROUGH_LOAD_BALANCER_AVAILABILITY_GROUP0
+        # andPASSTHROUGH_LOAD_BALANCER_AVAILABILITY_GROUP1. TheIPAddresses field
+        # specifies zero, one, or two IP addresses:
+        # 
+        # - If omitted, Google Cloud assigns two ephemeral IP addresses, one from
+        # each Availability Group.
+        # - If you specify one IP address that references an existing static IP
+        # address resource from one Availability Group, Google Cloud assigns an
+        # ephemeral IP address from the other Availability Group.
+        # - If you specify two IP addresses that reference existing static IP
+        # address resources, they are required to be from different Availability
+        # Groups.
+        # For global external Passthrough Network Load Balancer, each IP address can be
+        # one of the following:
         # 
+        # - A static or ephemeral IPv4 address from a Google-owned IP pool.
+        # - A static IPv4 address from a global public delegated prefix.
+        # - A static or ephemeral IPv6 /96 prefix from a Google-owned IP pool.
+        # For global external Passthrough Network Load Balancer, the two IP addresses
+        # can be of different types. One IP address can be from a BYOIP prefix while
+        # the other is from a Google-owned IP pool. One IP address can be static
+        # while the other is ephemeral. However, both IP addresses must have the same
+        # IP version, IPv4 or IPv6.
+        # The IP addresses can only be set at creation and cannot be updated.
+        # When creating a global external Passthrough Network Load Balancer
+        # forwarding rule (a parent forwarding rule), you must use theIPAddresses field,
+        # but the Google Cloud-generated child
+        # forwarding rules set the IPAddress field instead. Refer to
+        # theavailabilityGroup field for further details.
+        # Refer to the IPAddress field for the formats that can be used
+        # to specify IP addresses while creating a forwarding rule.
+        # Because Passthrough Network Load Balancers do not terminate or translate
+        # traffic, the backend stack types must be compatible with the forwarding
+        # rule IP version:
+        # 
+        # - If the forwarding rule IP version is IPv4, backends should be
+        # configured as dual-stack or IPv4-only.
+        # - If the forwarding rule IP version is IPv6, backends should be
+        # configured as dual-stack or IPv6-only.
         # Corresponds to the JSON property `IPAddresses`
         # @return [Array<String>]
         attr_accessor :ip_addresses
@@ -14810,17 +15219,43 @@ module Google
         # @return [Array<Google::Apis::ComputeBeta::ForwardingRuleAttachedExtension>]
         attr_accessor :attached_extensions
       
-        # [Output Only] Specifies the availability group of the forwarding rule. This
+        # Output only. [Output Only] Specifies the load balancing availability group,
+        # one of the
+        # two that collectively provide high availability.
+        # Specifies the availability group of the forwarding rule. This
         # field is for use by global external passthrough load balancers (load
-        # balancing scheme EXTERNAL_PASSTHROUGH) and is set for the child forwarding
-        # rules only.
+        # balancing scheme EXTERNAL_PASSTHROUGH) and is set for the
+        # child forwarding rules only. The possible values are:
+        # 
+        # - AVAILABILITY_GROUP0: Set for the child forwarding rule
+        # that is programmed on the AVAILABILITY_GROUP0 load balancing
+        # stack. The child forwarding rule has the same IP protocol, port, and
+        # backend service settings as the parent forwarding rule, but has only one of
+        # the two IP addresses of the parent forwarding rule, the one with the
+        # purpose PASSTHROUGH_LOAD_BALANCER_AVAILABILITY_GROUP0.
+        # - AVAILABILITY_GROUP1: Set for the child forwarding rule
+        # that is programmed on the AVAILABILITY_GROUP1 load balancing
+        # stack. The child forwarding rule has the same IP protocol, port and backend
+        # service settings as the parent forwarding rule, but has only one of the two
+        # IP addresses of the parent forwarding rule, the one with the
+        # purposePASSTHROUGH_LOAD_BALANCER_AVAILABILITY_GROUP1.
+        # For each global external Passthrough Network Load Balancer forwarding rule
+        # (a parent forwarding rule) that you create, Google Cloud generates two
+        # output-only child forwarding rules, one forAVAILABILITY_GROUP0 and one
+        # forAVAILABILITY_GROUP1.
         # Corresponds to the JSON property `availabilityGroup`
         # @return [String]
         attr_accessor :availability_group
       
         # Identifies the backend service to which the forwarding rule sends traffic.
-        # Required for internal and external passthrough Network Load Balancers;
-        # must be omitted for all other load balancer types.
+        # It is a required field for the following load balancers:
+        # 
+        # - Internal passthrough Network Load Balancers
+        # - Backend service-based regional external passthrough Network Load
+        # Balancers
+        # - Global external passthrough Network Load Balancers
+        # It cannot be set by other load balancer types and protocol forwarding
+        # rules.
         # Corresponds to the JSON property `backendService`
         # @return [String]
         attr_accessor :backend_service
@@ -14836,12 +15271,14 @@ module Google
         # @return [String]
         attr_accessor :base_forwarding_rule
       
-        # Output only. [Output Only] Applicable only to the parent forwarding rule of
-        # global
+        # Output only. [Output Only] The resource URLs for the child forwarding rules.
+        # Applicable only to the parent forwarding rule of global
         # external passthrough load balancers. This field contains the list of child
         # forwarding rule URLs associated with the parent forwarding rule: one for
         # each availability group. AVAILABILITY_GROUP0 will be the first element, and
-        # AVAILABILITY_GROUP1 will be the second element.
+        # AVAILABILITY_GROUP1 will be the second element. Refer to theavailabilityGroup
+        # field for further details. It cannot be set
+        # by any other forwarding rules.
         # Corresponds to the JSON property `childForwardingRules`
         # @return [Array<String>]
         attr_accessor :child_forwarding_rules
@@ -14962,8 +15399,8 @@ module Google
         attr_accessor :labels
       
         # Specifies the forwarding rule type.
-        # For more information about forwarding rules, refer to
-        # Forwarding rule concepts.
+        # For more information, refer to
+        # Forwarding rule product and scheme table.
         # Corresponds to the JSON property `loadBalancingScheme`
         # @return [String]
         attr_accessor :load_balancing_scheme
@@ -15003,6 +15440,13 @@ module Google
         # For Private Service Connect forwarding rules that forward traffic to Google
         # APIs, the forwarding rule name must be a 1-20 characters string with
         # lowercase letters and numbers and must start with a letter.
+        # For global external Passthrough Network Load Balancer forwarding rules, the
+        # forwarding rule name must be 1-43 characters long. For each global external
+        # Passthrough Network Load Balancer forwarding rule (a parent forwarding
+        # rule) that you create, Google Cloud generates two output-only child
+        # forwarding rules that are named by concatenating the parent forwarding rule
+        # name with the `-ag0` and `-ag1` suffixes, respectively. Refer to
+        # theavailabilityGroup field for further details.
         # Corresponds to the JSON property `name`
         # @return [String]
         attr_accessor :name
@@ -15039,8 +15483,8 @@ module Google
         attr_accessor :no_automate_dns_zone
         alias_method :no_automate_dns_zone?, :no_automate_dns_zone
       
-        # Output only. [Output Only] Applicable only to the child forwarding rules of
-        # global external
+        # Output only. [Output Only] The resource URL for the parent forwarding rule.
+        # Applicable only to the child forwarding rules of global external
         # passthrough load balancers. This field contains the URL of the parent
         # forwarding rule.
         # Corresponds to the JSON property `parentForwardingRule`
@@ -15062,7 +15506,9 @@ module Google
         # - Some products have restrictions on what ports can be used. See
         # port specifications for details.
         # For external forwarding rules, two or more forwarding rules cannot use the
-        # same [IPAddress, IPProtocol] pair, and cannot have overlappingportRanges.
+        # same [IPAddress, IPProtocol] pair (specified inIPAddress, IPAddresses,
+        # IPProtocol
+        # fields) if they have overlapping portRanges.
         # For internal forwarding rules within the same VPC network, two or more
         # forwarding rules cannot use the same [IPAddress, IPProtocol]
         # pair, and cannot have overlapping portRanges.
@@ -15085,8 +15531,9 @@ module Google
         # - You can specify a list of up to five ports by number, separated by
         # commas. The ports can be contiguous or discontiguous.
         # For external forwarding rules, two or more forwarding rules cannot use the
-        # same [IPAddress, IPProtocol] pair if they share at least one
-        # port number.
+        # same [IPAddress, IPProtocol] pair (specified inIPAddress, IPAddresses,
+        # IPProtocol
+        # fields) if they share at least one port number.
         # For internal forwarding rules within the same VPC network, two or more
         # forwarding rules cannot use the same [IPAddress, IPProtocol]
         # pair if they share at least one port number.
@@ -15194,6 +15641,13 @@ module Google
         # -  For Private Service Connect forwarding rules that forward traffic to
         # managed services, the target must be a service attachment. The target is not
         # mutable once set as a service attachment.
+        # The following load balancers cannot set the target field (they should set the
+        # backendService field instead):
+        # 
+        # - Internal passthrough Network Load Balancers
+        # - Backend service-based regional external passthrough Network Load
+        # Balancers
+        # - Global external passthrough Network Load Balancers
         # Corresponds to the JSON property `target`
         # @return [String]
         attr_accessor :target
@@ -15819,6 +16273,13 @@ module Google
         # @return [String]
         attr_accessor :reservation_name
       
+        # Name of the resource intended to be delivered. Name should conform to
+        # RFC1035. This will be the name of storage pool or Exapool for persistent
+        # disk FRs.
+        # Corresponds to the JSON property `resourceName`
+        # @return [String]
+        attr_accessor :resource_name
+      
         # Maintenance information for this reservation
         # Corresponds to the JSON property `schedulingType`
         # @return [String]
@@ -15860,6 +16321,11 @@ module Google
         # @return [Google::Apis::ComputeBeta::FutureReservationStatus]
         attr_accessor :status
       
+        # Storage pool properties for the future reservation.
+        # Corresponds to the JSON property `storagePoolProperties`
+        # @return [Google::Apis::ComputeBeta::FutureReservationStoragePoolProperties]
+        attr_accessor :storage_pool_properties
+      
         # Time window for this Future Reservation.
         # Corresponds to the JSON property `timeWindow`
         # @return [Google::Apis::ComputeBeta::FutureReservationTimeWindow]
@@ -15897,6 +16363,7 @@ module Google
           @protection_tier = args[:protection_tier] if args.key?(:protection_tier)
           @reservation_mode = args[:reservation_mode] if args.key?(:reservation_mode)
           @reservation_name = args[:reservation_name] if args.key?(:reservation_name)
+          @resource_name = args[:resource_name] if args.key?(:resource_name)
           @scheduling_type = args[:scheduling_type] if args.key?(:scheduling_type)
           @self_link = args[:self_link] if args.key?(:self_link)
           @self_link_with_id = args[:self_link_with_id] if args.key?(:self_link_with_id)
@@ -15904,6 +16371,7 @@ module Google
           @specific_reservation_required = args[:specific_reservation_required] if args.key?(:specific_reservation_required)
           @specific_sku_properties = args[:specific_sku_properties] if args.key?(:specific_sku_properties)
           @status = args[:status] if args.key?(:status)
+          @storage_pool_properties = args[:storage_pool_properties] if args.key?(:storage_pool_properties)
           @time_window = args[:time_window] if args.key?(:time_window)
           @zone = args[:zone] if args.key?(:zone)
         end
@@ -16019,6 +16487,11 @@ module Google
         # @return [Array<String>]
         attr_accessor :auto_created_reservations
       
+        # Exapool provisioned capacities for each SKU type
+        # Corresponds to the JSON property `exapoolProvisionedCapacityGb`
+        # @return [Google::Apis::ComputeBeta::StoragePoolExapoolProvisionedCapacityGb]
+        attr_accessor :exapool_provisioned_capacity_gb
+      
         # [Output Only] Represents the existing matching usage for the future
         # reservation.
         # Corresponds to the JSON property `existingMatchingUsageInfo`
@@ -16058,6 +16531,11 @@ module Google
         # @return [Google::Apis::ComputeBeta::FutureReservationStatusSpecificSkuProperties]
         attr_accessor :specific_sku_properties
       
+        # Storage pool provisioned capacities for each SKU type.
+        # Corresponds to the JSON property `storagePoolProvisionedCapacity`
+        # @return [Google::Apis::ComputeBeta::FutureReservationStoragePoolProvisionedCapacity]
+        attr_accessor :storage_pool_provisioned_capacity
+      
         def initialize(**args)
            update!(**args)
         end
@@ -16066,12 +16544,14 @@ module Google
         def update!(**args)
           @amendment_status = args[:amendment_status] if args.key?(:amendment_status)
           @auto_created_reservations = args[:auto_created_reservations] if args.key?(:auto_created_reservations)
+          @exapool_provisioned_capacity_gb = args[:exapool_provisioned_capacity_gb] if args.key?(:exapool_provisioned_capacity_gb)
           @existing_matching_usage_info = args[:existing_matching_usage_info] if args.key?(:existing_matching_usage_info)
           @fulfilled_count = args[:fulfilled_count] if args.key?(:fulfilled_count)
           @last_known_good_state = args[:last_known_good_state] if args.key?(:last_known_good_state)
           @lock_time = args[:lock_time] if args.key?(:lock_time)
           @procurement_status = args[:procurement_status] if args.key?(:procurement_status)
           @specific_sku_properties = args[:specific_sku_properties] if args.key?(:specific_sku_properties)
+          @storage_pool_provisioned_capacity = args[:storage_pool_provisioned_capacity] if args.key?(:storage_pool_provisioned_capacity)
         end
       end
       
@@ -16210,6 +16690,70 @@ module Google
         end
       end
       
+      # Storage pool properties for the future reservation.
+      class FutureReservationStoragePoolProperties
+        include Google::Apis::Core::Hashable
+      
+        # Exapool provisioned capacities for each SKU type
+        # Corresponds to the JSON property `requestedExapoolProvisionedCapacityGb`
+        # @return [Google::Apis::ComputeBeta::StoragePoolExapoolProvisionedCapacityGb]
+        attr_accessor :requested_exapool_provisioned_capacity_gb
+      
+        # Storage pool provisioned capacities for each SKU type.
+        # Corresponds to the JSON property `requestedStoragePoolProvisionedCapacity`
+        # @return [Google::Apis::ComputeBeta::FutureReservationStoragePoolProvisionedCapacity]
+        attr_accessor :requested_storage_pool_provisioned_capacity
+      
+        # Type of the storage pool.
+        # Corresponds to the JSON property `storagePoolType`
+        # @return [String]
+        attr_accessor :storage_pool_type
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @requested_exapool_provisioned_capacity_gb = args[:requested_exapool_provisioned_capacity_gb] if args.key?(:requested_exapool_provisioned_capacity_gb)
+          @requested_storage_pool_provisioned_capacity = args[:requested_storage_pool_provisioned_capacity] if args.key?(:requested_storage_pool_provisioned_capacity)
+          @storage_pool_type = args[:storage_pool_type] if args.key?(:storage_pool_type)
+        end
+      end
+      
+      # Storage pool provisioned capacities for each SKU type.
+      class FutureReservationStoragePoolProvisionedCapacity
+        include Google::Apis::Core::Hashable
+      
+        # Size of the storage pool in GiB.
+        # Corresponds to the JSON property `poolProvisionedCapacityGb`
+        # @return [Fixnum]
+        attr_accessor :pool_provisioned_capacity_gb
+      
+        # Provisioned IOPS of the storage pool. Only relevant if the storage pool
+        # type is hyperdisk-balanced.
+        # Corresponds to the JSON property `poolProvisionedIops`
+        # @return [Fixnum]
+        attr_accessor :pool_provisioned_iops
+      
+        # Provisioned throughput of the storage pool in MiB/s. Only relevant if
+        # the storage pool type is hyperdisk-balanced or hyperdisk-throughput.
+        # Corresponds to the JSON property `poolProvisionedThroughput`
+        # @return [Fixnum]
+        attr_accessor :pool_provisioned_throughput
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @pool_provisioned_capacity_gb = args[:pool_provisioned_capacity_gb] if args.key?(:pool_provisioned_capacity_gb)
+          @pool_provisioned_iops = args[:pool_provisioned_iops] if args.key?(:pool_provisioned_iops)
+          @pool_provisioned_throughput = args[:pool_provisioned_throughput] if args.key?(:pool_provisioned_throughput)
+        end
+      end
+      
       # 
       class FutureReservationTimeWindow
         include Google::Apis::Core::Hashable
@@ -17029,6 +17573,68 @@ module Google
         end
       end
       
+      # Metadata for GetHealth operations.
+      class GetHealthOperationMetadata
+        include Google::Apis::Core::Hashable
+      
+        # Health information.
+        # Corresponds to the JSON property `healthInfo`
+        # @return [Google::Apis::ComputeBeta::GetHealthOperationMetadataHealthInfo]
+        attr_accessor :health_info
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @health_info = args[:health_info] if args.key?(:health_info)
+        end
+      end
+      
+      # Health information.
+      class GetHealthOperationMetadataHealthInfo
+        include Google::Apis::Core::Hashable
+      
+        # Output only. The availability SLO status.
+        # Corresponds to the JSON property `availabilitySloStatus`
+        # @return [String]
+        attr_accessor :availability_slo_status
+      
+        # Output only. The health status.
+        # Corresponds to the JSON property `healthStatus`
+        # @return [String]
+        attr_accessor :health_status
+      
+        # Output only. The repair category.
+        # Corresponds to the JSON property `repairCategory`
+        # @return [String]
+        attr_accessor :repair_category
+      
+        # Output only. The reason for unhealthy status.
+        # Corresponds to the JSON property `unhealthyReason`
+        # @return [String]
+        attr_accessor :unhealthy_reason
+      
+        # Output only. The time when health info was updated.
+        # Corresponds to the JSON property `updateTime`
+        # @return [String]
+        attr_accessor :update_time
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @availability_slo_status = args[:availability_slo_status] if args.key?(:availability_slo_status)
+          @health_status = args[:health_status] if args.key?(:health_status)
+          @repair_category = args[:repair_category] if args.key?(:repair_category)
+          @unhealthy_reason = args[:unhealthy_reason] if args.key?(:unhealthy_reason)
+          @update_time = args[:update_time] if args.key?(:update_time)
+        end
+      end
+      
       # 
       class GetVersionOperationMetadata
         include Google::Apis::Core::Hashable
@@ -17108,14 +17714,51 @@ module Google
         end
       end
       
-      # 
-      class GlobalNetworkEndpointGroupsAttachEndpointsRequest
+      # Represents the Global Frontend Bundle settings for a single project.
+      class GlobalFrontendSettings
         include Google::Apis::Core::Hashable
       
-        # The list of network endpoints to be attached.
-        # Corresponds to the JSON property `networkEndpoints`
-        # @return [Array<Google::Apis::ComputeBeta::NetworkEndpoint>]
-        attr_accessor :network_endpoints
+        # Customer-settable bundle type.
+        # Corresponds to the JSON property `bundleType`
+        # @return [String]
+        attr_accessor :bundle_type
+      
+        # Output only. [Output Only] Creation timestamp in RFC3339 text format.
+        # Corresponds to the JSON property `creationTimestamp`
+        # @return [String]
+        attr_accessor :creation_timestamp
+      
+        # Output only. [Output Only] An optional description of this resource.
+        # Corresponds to the JSON property `description`
+        # @return [String]
+        attr_accessor :description
+      
+        # Output only. For optimistic locking
+        # Corresponds to the JSON property `etag`
+        # @return [String]
+        attr_accessor :etag
+      
+        # Output only. [Output Only] The unique identifier for the resource. This
+        # identifier is
+        # defined by the server.
+        # Corresponds to the JSON property `id`
+        # @return [Fixnum]
+        attr_accessor :id
+      
+        # Output only. OUTPUT_ONLY fields
+        # [Output Only] Name of the resource. Must be 1-63 characters long and match
+        # the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first
+        # character must be a lowercase letter, and all following characters must
+        # be a dash, lowercase letter, or digit, except the last character, which
+        # cannot be a dash.
+        # Corresponds to the JSON property `name`
+        # @return [String]
+        attr_accessor :name
+      
+        # Output only. [Output Only] Server-defined URL for the resource.
+        # Corresponds to the JSON property `selfLink`
+        # @return [String]
+        attr_accessor :self_link
       
         def initialize(**args)
            update!(**args)
@@ -17123,18 +17766,43 @@ module Google
       
         # Update properties of this object
         def update!(**args)
-          @network_endpoints = args[:network_endpoints] if args.key?(:network_endpoints)
+          @bundle_type = args[:bundle_type] if args.key?(:bundle_type)
+          @creation_timestamp = args[:creation_timestamp] if args.key?(:creation_timestamp)
+          @description = args[:description] if args.key?(:description)
+          @etag = args[:etag] if args.key?(:etag)
+          @id = args[:id] if args.key?(:id)
+          @name = args[:name] if args.key?(:name)
+          @self_link = args[:self_link] if args.key?(:self_link)
         end
       end
       
-      # 
-      class GlobalNetworkEndpointGroupsDetachEndpointsRequest
+      # Response to an UpdateGlobalFrontendSettingsRequest.
+      class GlobalFrontendSettingsPatchResponse
         include Google::Apis::Core::Hashable
       
-        # The list of network endpoints to be detached.
-        # Corresponds to the JSON property `networkEndpoints`
-        # @return [Array<Google::Apis::ComputeBeta::NetworkEndpoint>]
-        attr_accessor :network_endpoints
+        # Represents an Operation resource.
+        # Google Compute Engine has three Operation resources:
+        # * [Global](/compute/docs/reference/rest/beta/globalOperations)
+        # * [Regional](/compute/docs/reference/rest/beta/regionOperations)
+        # * [Zonal](/compute/docs/reference/rest/beta/zoneOperations)
+        # You can use an operation resource to manage asynchronous API requests.
+        # For more information, readHandling
+        # API responses.
+        # Operations can be global, regional or zonal.
+        # 
+        # - For global operations, use the `globalOperations`
+        # resource.
+        # - For regional operations, use the
+        # `regionOperations` resource.
+        # - For zonal operations, use
+        # the `zoneOperations` resource.
+        # For more information, read
+        # Global, Regional, and Zonal Resources.
+        # Note that completed Operation resources have a limited
+        # retention period.
+        # Corresponds to the JSON property `operation`
+        # @return [Google::Apis::ComputeBeta::Operation]
+        attr_accessor :operation
       
         def initialize(**args)
            update!(**args)
@@ -17142,95 +17810,18 @@ module Google
       
         # Update properties of this object
         def update!(**args)
-          @network_endpoints = args[:network_endpoints] if args.key?(:network_endpoints)
+          @operation = args[:operation] if args.key?(:operation)
         end
       end
       
       # 
-      class GlobalOrganizationSetPolicyRequest
+      class GlobalNetworkEndpointGroupsAttachEndpointsRequest
         include Google::Apis::Core::Hashable
       
-        # Flatten Policy to create a backward compatible wire-format.
-        # Deprecated. Use 'policy' to specify bindings.
-        # Corresponds to the JSON property `bindings`
-        # @return [Array<Google::Apis::ComputeBeta::Binding>]
-        attr_accessor :bindings
-      
-        # Flatten Policy to create a backward compatible wire-format.
-        # Deprecated. Use 'policy' to specify the etag.
-        # Corresponds to the JSON property `etag`
-        # NOTE: Values are automatically base64 encoded/decoded in the client library.
-        # @return [String]
-        attr_accessor :etag
-      
-        # An Identity and Access Management (IAM) policy, which specifies access
-        # controls for Google Cloud resources.
-        # A `Policy` is a collection of `bindings`. A `binding` binds one or more
-        # `members`, or principals, to a single `role`. Principals can be user
-        # accounts, service accounts, Google groups, and domains (such as G Suite). A
-        # `role` is a named list of permissions; each `role` can be an IAM predefined
-        # role or a user-created custom role.
-        # For some types of Google Cloud resources, a `binding` can also specify a
-        # `condition`, which is a logical expression that allows access to a resource
-        # only if the expression evaluates to `true`. A condition can add constraints
-        # based on attributes of the request, the resource, or both. To learn which
-        # resources support conditions in their IAM policies, see the
-        # [IAM documentation](https://cloud.google.com/iam/help/conditions/resource-
-        # policies).
-        # **JSON example:**
-        # ```
-        # `
-        # "bindings": [
-        # `
-        # "role": "roles/resourcemanager.organizationAdmin",
-        # "members": [
-        # "user:mike@example.com",
-        # "group:admins@example.com",
-        # "domain:google.com",
-        # "serviceAccount:my-project-id@appspot.gserviceaccount.com"
-        # ]
-        # `,
-        # `
-        # "role": "roles/resourcemanager.organizationViewer",
-        # "members": [
-        # "user:eve@example.com"
-        # ],
-        # "condition": `
-        # "title": "expirable access",
-        # "description": "Does not grant access after Sep 2020",
-        # "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')
-        # ",
-        # `
-        # `
-        # ],
-        # "etag": "BwWWja0YfJA=",
-        # "version": 3
-        # `
-        # ```
-        # **YAML example:**
-        # ```
-        # bindings:
-        # - members:
-        # - user:mike@example.com
-        # - group:admins@example.com
-        # - domain:google.com
-        # - serviceAccount:my-project-id@appspot.gserviceaccount.com
-        # role: roles/resourcemanager.organizationAdmin
-        # - members:
-        # - user:eve@example.com
-        # role: roles/resourcemanager.organizationViewer
-        # condition:
-        # title: expirable access
-        # description: Does not grant access after Sep 2020
-        # expression: request.time < timestamp('2020-10-01T00:00:00.000Z')
-        # etag: BwWWja0YfJA=
-        # version: 3
-        # ```
-        # For a description of IAM and its features, see the
-        # [IAM documentation](https://cloud.google.com/iam/docs/).
-        # Corresponds to the JSON property `policy`
-        # @return [Google::Apis::ComputeBeta::Policy]
-        attr_accessor :policy
+        # The list of network endpoints to be attached.
+        # Corresponds to the JSON property `networkEndpoints`
+        # @return [Array<Google::Apis::ComputeBeta::NetworkEndpoint>]
+        attr_accessor :network_endpoints
       
         def initialize(**args)
            update!(**args)
@@ -17238,36 +17829,18 @@ module Google
       
         # Update properties of this object
         def update!(**args)
-          @bindings = args[:bindings] if args.key?(:bindings)
-          @etag = args[:etag] if args.key?(:etag)
-          @policy = args[:policy] if args.key?(:policy)
+          @network_endpoints = args[:network_endpoints] if args.key?(:network_endpoints)
         end
       end
       
       # 
-      class GlobalSetLabelsRequest
+      class GlobalNetworkEndpointGroupsDetachEndpointsRequest
         include Google::Apis::Core::Hashable
       
-        # The fingerprint of the previous set of labels for this resource,
-        # used to detect conflicts. The fingerprint is initially generated by Compute
-        # Engine and changes after every request to modify or update labels. You must
-        # always provide an up-to-date fingerprint hash when updating or changing
-        # labels, otherwise the request will fail with error412 conditionNotMet.  Make a
-        # get() request to the
-        # resource to get the latest fingerprint.
-        # Corresponds to the JSON property `labelFingerprint`
-        # NOTE: Values are automatically base64 encoded/decoded in the client library.
-        # @return [String]
-        attr_accessor :label_fingerprint
-      
-        # A list of labels to apply for this resource. Each label must comply with
-        # the
-        # requirements for labels. For example,"webserver-frontend": "images". A label
-        # value can also be
-        # empty (e.g. "my-label": "").
-        # Corresponds to the JSON property `labels`
-        # @return [Hash<String,String>]
-        attr_accessor :labels
+        # The list of network endpoints to be detached.
+        # Corresponds to the JSON property `networkEndpoints`
+        # @return [Array<Google::Apis::ComputeBeta::NetworkEndpoint>]
+        attr_accessor :network_endpoints
       
         def initialize(**args)
            update!(**args)
@@ -17275,13 +17848,146 @@ module Google
       
         # Update properties of this object
         def update!(**args)
-          @label_fingerprint = args[:label_fingerprint] if args.key?(:label_fingerprint)
-          @labels = args[:labels] if args.key?(:labels)
+          @network_endpoints = args[:network_endpoints] if args.key?(:network_endpoints)
         end
       end
       
       # 
-      class GlobalSetPolicyRequest
+      class GlobalOrganizationSetPolicyRequest
+        include Google::Apis::Core::Hashable
+      
+        # Flatten Policy to create a backward compatible wire-format.
+        # Deprecated. Use 'policy' to specify bindings.
+        # Corresponds to the JSON property `bindings`
+        # @return [Array<Google::Apis::ComputeBeta::Binding>]
+        attr_accessor :bindings
+      
+        # Flatten Policy to create a backward compatible wire-format.
+        # Deprecated. Use 'policy' to specify the etag.
+        # Corresponds to the JSON property `etag`
+        # NOTE: Values are automatically base64 encoded/decoded in the client library.
+        # @return [String]
+        attr_accessor :etag
+      
+        # An Identity and Access Management (IAM) policy, which specifies access
+        # controls for Google Cloud resources.
+        # A `Policy` is a collection of `bindings`. A `binding` binds one or more
+        # `members`, or principals, to a single `role`. Principals can be user
+        # accounts, service accounts, Google groups, and domains (such as G Suite). A
+        # `role` is a named list of permissions; each `role` can be an IAM predefined
+        # role or a user-created custom role.
+        # For some types of Google Cloud resources, a `binding` can also specify a
+        # `condition`, which is a logical expression that allows access to a resource
+        # only if the expression evaluates to `true`. A condition can add constraints
+        # based on attributes of the request, the resource, or both. To learn which
+        # resources support conditions in their IAM policies, see the
+        # [IAM documentation](https://cloud.google.com/iam/help/conditions/resource-
+        # policies).
+        # **JSON example:**
+        # ```
+        # `
+        # "bindings": [
+        # `
+        # "role": "roles/resourcemanager.organizationAdmin",
+        # "members": [
+        # "user:mike@example.com",
+        # "group:admins@example.com",
+        # "domain:google.com",
+        # "serviceAccount:my-project-id@appspot.gserviceaccount.com"
+        # ]
+        # `,
+        # `
+        # "role": "roles/resourcemanager.organizationViewer",
+        # "members": [
+        # "user:eve@example.com"
+        # ],
+        # "condition": `
+        # "title": "expirable access",
+        # "description": "Does not grant access after Sep 2020",
+        # "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')
+        # ",
+        # `
+        # `
+        # ],
+        # "etag": "BwWWja0YfJA=",
+        # "version": 3
+        # `
+        # ```
+        # **YAML example:**
+        # ```
+        # bindings:
+        # - members:
+        # - user:mike@example.com
+        # - group:admins@example.com
+        # - domain:google.com
+        # - serviceAccount:my-project-id@appspot.gserviceaccount.com
+        # role: roles/resourcemanager.organizationAdmin
+        # - members:
+        # - user:eve@example.com
+        # role: roles/resourcemanager.organizationViewer
+        # condition:
+        # title: expirable access
+        # description: Does not grant access after Sep 2020
+        # expression: request.time < timestamp('2020-10-01T00:00:00.000Z')
+        # etag: BwWWja0YfJA=
+        # version: 3
+        # ```
+        # For a description of IAM and its features, see the
+        # [IAM documentation](https://cloud.google.com/iam/docs/).
+        # Corresponds to the JSON property `policy`
+        # @return [Google::Apis::ComputeBeta::Policy]
+        attr_accessor :policy
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @bindings = args[:bindings] if args.key?(:bindings)
+          @etag = args[:etag] if args.key?(:etag)
+          @policy = args[:policy] if args.key?(:policy)
+        end
+      end
+      
+      # 
+      class GlobalSetLabelsRequest
+        include Google::Apis::Core::Hashable
+      
+        # The fingerprint of the previous set of labels for this resource,
+        # used to detect conflicts. The fingerprint is initially generated by Compute
+        # Engine and changes after every request to modify or update labels. You must
+        # always provide an up-to-date fingerprint hash when updating or changing
+        # labels, otherwise the request will fail with error412 conditionNotMet.  Make a
+        # get() request to the
+        # resource to get the latest fingerprint.
+        # Corresponds to the JSON property `labelFingerprint`
+        # NOTE: Values are automatically base64 encoded/decoded in the client library.
+        # @return [String]
+        attr_accessor :label_fingerprint
+      
+        # A list of labels to apply for this resource. Each label must comply with
+        # the
+        # requirements for labels. For example,"webserver-frontend": "images". A label
+        # value can also be
+        # empty (e.g. "my-label": "").
+        # Corresponds to the JSON property `labels`
+        # @return [Hash<String,String>]
+        attr_accessor :labels
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @label_fingerprint = args[:label_fingerprint] if args.key?(:label_fingerprint)
+          @labels = args[:labels] if args.key?(:labels)
+        end
+      end
+      
+      # 
+      class GlobalSetPolicyRequest
         include Google::Apis::Core::Hashable
       
         # Flatten Policy to create a backward compatible wire-format.
@@ -18065,6 +18771,7 @@ module Google
         # - IDPF
         # - SNP_SVSM_CAPABLE
         # - CCA_CAPABLE
+        # - SUSPEND_SAFE_FPR
         # For more information, see
         # Enabling guest operating system features.
         # Corresponds to the JSON property `type`
@@ -23782,6 +24489,12 @@ module Google
         # @return [Array<String>]
         attr_accessor :machine_types
       
+        # Name of the minimum CPU platform to be used by this instance selection.
+        # e.g. 'Intel Ice Lake'.
+        # Corresponds to the JSON property `minCpuPlatform`
+        # @return [String]
+        attr_accessor :min_cpu_platform
+      
         # Rank when prioritizing the shape flexibilities.
         # The instance selections with rank are considered
         # first, in the ascending order of the rank.
@@ -23798,6 +24511,7 @@ module Google
         def update!(**args)
           @disks = args[:disks] if args.key?(:disks)
           @machine_types = args[:machine_types] if args.key?(:machine_types)
+          @min_cpu_platform = args[:min_cpu_platform] if args.key?(:min_cpu_platform)
           @rank = args[:rank] if args.key?(:rank)
         end
       end
@@ -30823,6 +31537,11 @@ module Google
         # @return [String]
         attr_accessor :self_link
       
+        # Output only. Server-defined URL for this resource with the resource id.
+        # Corresponds to the JSON property `selfLinkWithId`
+        # @return [String]
+        attr_accessor :self_link_with_id
+      
         # Output only. [Output Only] The current state of Interconnect functionality,
         # which can
         # take one of the following values:
@@ -30891,6 +31610,7 @@ module Google
           @requested_link_count = args[:requested_link_count] if args.key?(:requested_link_count)
           @satisfies_pzs = args[:satisfies_pzs] if args.key?(:satisfies_pzs)
           @self_link = args[:self_link] if args.key?(:self_link)
+          @self_link_with_id = args[:self_link_with_id] if args.key?(:self_link_with_id)
           @state = args[:state] if args.key?(:state)
           @subzone = args[:subzone] if args.key?(:subzone)
           @wire_groups = args[:wire_groups] if args.key?(:wire_groups)
@@ -34202,6 +34922,19 @@ module Google
         # @return [String]
         attr_accessor :city
       
+        # Output only. The maximum unmetered bandwidth for dynamic paths allowable per
+        # WireGroup for this metro.
+        # Corresponds to the JSON property `maxDynamicPathBandwidthGbps`
+        # @return [Fixnum]
+        attr_accessor :max_dynamic_path_bandwidth_gbps
+      
+        # Output only. The maximum unmetered bandwidth for fixed paths allowable per
+        # WireGroup
+        # for this metro.
+        # Corresponds to the JSON property `maxFixedPathBandwidthGbps`
+        # @return [Fixnum]
+        attr_accessor :max_fixed_path_bandwidth_gbps
+      
         def initialize(**args)
            update!(**args)
         end
@@ -34209,6 +34942,8 @@ module Google
         # Update properties of this object
         def update!(**args)
           @city = args[:city] if args.key?(:city)
+          @max_dynamic_path_bandwidth_gbps = args[:max_dynamic_path_bandwidth_gbps] if args.key?(:max_dynamic_path_bandwidth_gbps)
+          @max_fixed_path_bandwidth_gbps = args[:max_fixed_path_bandwidth_gbps] if args.key?(:max_fixed_path_bandwidth_gbps)
         end
       end
       
@@ -35971,6 +36706,147 @@ module Google
         end
       end
       
+      # 
+      class ListVmExtensionStatesResponse
+        include Google::Apis::Core::Hashable
+      
+        # Output only. Fingerprint of this resource. A hash of the contents stored
+        # in this object. This field is used in optimistic locking. This field will
+        # be ignored when inserting a VmExtensionPolicy. An up-to-date
+        # fingerprint must be provided in order to update the VmExtensionPolicy.
+        # To see the latest value of the fingerprint, make a get() request to
+        # retrieve a VmExtensionPolicy.
+        # Corresponds to the JSON property `etag`
+        # @return [String]
+        attr_accessor :etag
+      
+        # Output only. Unique identifier for the resource; defined by the server.
+        # Corresponds to the JSON property `id`
+        # @return [String]
+        attr_accessor :id
+      
+        # Output only. A list of VM extension policy resources.
+        # Corresponds to the JSON property `items`
+        # @return [Array<Google::Apis::ComputeBeta::VmExtensionState>]
+        attr_accessor :items
+      
+        # Output only. Type of resource.
+        # Corresponds to the JSON property `kind`
+        # @return [String]
+        attr_accessor :kind
+      
+        # Output only. This token allows you to get the next page of results for
+        # list requests. If the number of results is larger thanmaxResults, use the
+        # nextPageToken as a value for
+        # the query parameter pageToken in the next list request.
+        # Subsequent list requests will have their own nextPageToken to
+        # continue paging through the results.
+        # Corresponds to the JSON property `nextPageToken`
+        # @return [String]
+        attr_accessor :next_page_token
+      
+        # Output only. Server-defined URL for this resource.
+        # Corresponds to the JSON property `selfLink`
+        # @return [String]
+        attr_accessor :self_link
+      
+        # Output only. Unreachable resources.
+        # Corresponds to the JSON property `unreachables`
+        # @return [Array<String>]
+        attr_accessor :unreachables
+      
+        # Output only. Informational warning message.
+        # Corresponds to the JSON property `warning`
+        # @return [Google::Apis::ComputeBeta::ListVmExtensionStatesResponse::Warning]
+        attr_accessor :warning
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @etag = args[:etag] if args.key?(:etag)
+          @id = args[:id] if args.key?(:id)
+          @items = args[:items] if args.key?(:items)
+          @kind = args[:kind] if args.key?(:kind)
+          @next_page_token = args[:next_page_token] if args.key?(:next_page_token)
+          @self_link = args[:self_link] if args.key?(:self_link)
+          @unreachables = args[:unreachables] if args.key?(:unreachables)
+          @warning = args[:warning] if args.key?(:warning)
+        end
+        
+        # Output only. Informational warning message.
+        class Warning
+          include Google::Apis::Core::Hashable
+        
+          # [Output Only] A warning code, if applicable. For example, Compute
+          # Engine returns NO_RESULTS_ON_PAGE if there
+          # are no results in the response.
+          # Corresponds to the JSON property `code`
+          # @return [String]
+          attr_accessor :code
+        
+          # [Output Only] Metadata about this warning in key:
+          # value format. For example:
+          # "data": [
+          # `
+          # "key": "scope",
+          # "value": "zones/us-east1-d"
+          # `]
+          # Corresponds to the JSON property `data`
+          # @return [Array<Google::Apis::ComputeBeta::ListVmExtensionStatesResponse::Warning::Datum>]
+          attr_accessor :data
+        
+          # [Output Only] A human-readable description of the warning code.
+          # Corresponds to the JSON property `message`
+          # @return [String]
+          attr_accessor :message
+        
+          def initialize(**args)
+             update!(**args)
+          end
+        
+          # Update properties of this object
+          def update!(**args)
+            @code = args[:code] if args.key?(:code)
+            @data = args[:data] if args.key?(:data)
+            @message = args[:message] if args.key?(:message)
+          end
+          
+          # 
+          class Datum
+            include Google::Apis::Core::Hashable
+          
+            # [Output Only] A key that provides more detail on the warning being
+            # returned. For example, for warnings where there are no results in a list
+            # request for a particular zone, this key might be scope and
+            # the key value might be the zone name. Other examples might be a key
+            # indicating a deprecated resource and a suggested replacement, or a
+            # warning about invalid network settings (for example, if an instance
+            # attempts to perform IP forwarding but is not enabled for IP forwarding).
+            # Corresponds to the JSON property `key`
+            # @return [String]
+            attr_accessor :key
+          
+            # [Output Only] A warning data value corresponding to the key.
+            # Corresponds to the JSON property `value`
+            # @return [String]
+            attr_accessor :value
+          
+            def initialize(**args)
+               update!(**args)
+            end
+          
+            # Update properties of this object
+            def update!(**args)
+              @key = args[:key] if args.key?(:key)
+              @value = args[:value] if args.key?(:value)
+            end
+          end
+        end
+      end
+      
       # 
       class LocalDisk
         include Google::Apis::Core::Hashable
@@ -37113,8 +37989,7 @@ module Google
         # @return [Google::Apis::ComputeBeta::ManagedInstanceShutdownDetails]
         attr_accessor :shutdown_details
       
-        # Output only. [Output Only] The eventual status of the instance. The instance
-        # group
+        # Output only. The eventual status of the instance. The instance group
         # manager will not be identified as stable till each managed instance reaches
         # its targetStatus.
         # Corresponds to the JSON property `targetStatus`
@@ -37469,6 +38344,189 @@ module Google
         end
       end
       
+      # Represents a ManagedRuleset resource.
+      # Managed internally by Cloud Armor CLH for Managed Rules features.
+      # Customers can only view these resources to modify their Security Policies.
+      # For more information, see
+      # https://cloud.google.com/armor/docs/.
+      class ManagedRuleset
+        include Google::Apis::Core::Hashable
+      
+        # Output only. [Output Only] The change log for this managed ruleset.
+        # Corresponds to the JSON property `changeLog`
+        # @return [String]
+        attr_accessor :change_log
+      
+        # Output only. [Output Only] Creation timestamp in RFC3339 text format.
+        # Corresponds to the JSON property `creationTimestamp`
+        # @return [String]
+        attr_accessor :creation_timestamp
+      
+        # [Output Only] An optional description of this resource.
+        # Corresponds to the JSON property `description`
+        # @return [String]
+        attr_accessor :description
+      
+        # Output only. [Output Only] The unique identifier for the resource. This
+        # identifier is
+        # defined by the server.
+        # Corresponds to the JSON property `id`
+        # @return [Fixnum]
+        attr_accessor :id
+      
+        # Name of the resource. Generated internally when the resource is created.
+        # The name must be 1-63 characters long, and comply withRFC1035.
+        # Specifically, the name must be 1-63 characters long and match the regular
+        # expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first
+        # character must be a lowercase letter, and all following characters must
+        # be a dash, lowercase letter, or digit, except the last character, which
+        # cannot be a dash.
+        # Corresponds to the JSON property `name`
+        # @return [String]
+        attr_accessor :name
+      
+        # Output only. [Output Only] The list of managed rule IDs that are included in
+        # this managed ruleset.
+        # Corresponds to the JSON property `ruleIds`
+        # @return [Array<String>]
+        attr_accessor :rule_ids
+      
+        # Output only. [Output Only] The managed ruleset identifier that can be
+        # configured in
+        # Security Policy rules.
+        # Corresponds to the JSON property `rulesetId`
+        # @return [String]
+        attr_accessor :ruleset_id
+      
+        # Output only. [Output Only] Server-defined URL for the resource.
+        # Corresponds to the JSON property `selfLink`
+        # @return [String]
+        attr_accessor :self_link
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @change_log = args[:change_log] if args.key?(:change_log)
+          @creation_timestamp = args[:creation_timestamp] if args.key?(:creation_timestamp)
+          @description = args[:description] if args.key?(:description)
+          @id = args[:id] if args.key?(:id)
+          @name = args[:name] if args.key?(:name)
+          @rule_ids = args[:rule_ids] if args.key?(:rule_ids)
+          @ruleset_id = args[:ruleset_id] if args.key?(:ruleset_id)
+          @self_link = args[:self_link] if args.key?(:self_link)
+        end
+      end
+      
+      # 
+      class ManagedRulesetList
+        include Google::Apis::Core::Hashable
+      
+        # 
+        # Corresponds to the JSON property `id`
+        # @return [String]
+        attr_accessor :id
+      
+        # 
+        # Corresponds to the JSON property `items`
+        # @return [Array<Google::Apis::ComputeBeta::ManagedRuleset>]
+        attr_accessor :items
+      
+        # 
+        # Corresponds to the JSON property `nextPageToken`
+        # @return [String]
+        attr_accessor :next_page_token
+      
+        # 
+        # Corresponds to the JSON property `warning`
+        # @return [Google::Apis::ComputeBeta::ManagedRulesetList::Warning]
+        attr_accessor :warning
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @id = args[:id] if args.key?(:id)
+          @items = args[:items] if args.key?(:items)
+          @next_page_token = args[:next_page_token] if args.key?(:next_page_token)
+          @warning = args[:warning] if args.key?(:warning)
+        end
+        
+        # 
+        class Warning
+          include Google::Apis::Core::Hashable
+        
+          # [Output Only] A warning code, if applicable. For example, Compute
+          # Engine returns NO_RESULTS_ON_PAGE if there
+          # are no results in the response.
+          # Corresponds to the JSON property `code`
+          # @return [String]
+          attr_accessor :code
+        
+          # [Output Only] Metadata about this warning in key:
+          # value format. For example:
+          # "data": [
+          # `
+          # "key": "scope",
+          # "value": "zones/us-east1-d"
+          # `]
+          # Corresponds to the JSON property `data`
+          # @return [Array<Google::Apis::ComputeBeta::ManagedRulesetList::Warning::Datum>]
+          attr_accessor :data
+        
+          # [Output Only] A human-readable description of the warning code.
+          # Corresponds to the JSON property `message`
+          # @return [String]
+          attr_accessor :message
+        
+          def initialize(**args)
+             update!(**args)
+          end
+        
+          # Update properties of this object
+          def update!(**args)
+            @code = args[:code] if args.key?(:code)
+            @data = args[:data] if args.key?(:data)
+            @message = args[:message] if args.key?(:message)
+          end
+          
+          # 
+          class Datum
+            include Google::Apis::Core::Hashable
+          
+            # [Output Only] A key that provides more detail on the warning being
+            # returned. For example, for warnings where there are no results in a list
+            # request for a particular zone, this key might be scope and
+            # the key value might be the zone name. Other examples might be a key
+            # indicating a deprecated resource and a suggested replacement, or a
+            # warning about invalid network settings (for example, if an instance
+            # attempts to perform IP forwarding but is not enabled for IP forwarding).
+            # Corresponds to the JSON property `key`
+            # @return [String]
+            attr_accessor :key
+          
+            # [Output Only] A warning data value corresponding to the key.
+            # Corresponds to the JSON property `value`
+            # @return [String]
+            attr_accessor :value
+          
+            def initialize(**args)
+               update!(**args)
+            end
+          
+            # Update properties of this object
+            def update!(**args)
+              @key = args[:key] if args.key?(:key)
+              @value = args[:value] if args.key?(:value)
+            end
+          end
+        end
+      end
+      
       # A metadata key/value entry.
       class Metadata
         include Google::Apis::Core::Hashable
@@ -45459,6 +46517,11 @@ module Google
         # @return [Google::Apis::ComputeBeta::Operation::Error]
         attr_accessor :error
       
+        # Metadata for GetHealth operations.
+        # Corresponds to the JSON property `getHealthOperationMetadata`
+        # @return [Google::Apis::ComputeBeta::GetHealthOperationMetadata]
+        attr_accessor :get_health_operation_metadata
+      
         # 
         # Corresponds to the JSON property `getVersionOperationMetadata`
         # @return [Google::Apis::ComputeBeta::GetVersionOperationMetadata]
@@ -45611,6 +46674,7 @@ module Google
           @description = args[:description] if args.key?(:description)
           @end_time = args[:end_time] if args.key?(:end_time)
           @error = args[:error] if args.key?(:error)
+          @get_health_operation_metadata = args[:get_health_operation_metadata] if args.key?(:get_health_operation_metadata)
           @get_version_operation_metadata = args[:get_version_operation_metadata] if args.key?(:get_version_operation_metadata)
           @http_error_message = args[:http_error_message] if args.key?(:http_error_message)
           @http_error_status_code = args[:http_error_status_code] if args.key?(:http_error_status_code)
@@ -49535,6 +50599,570 @@ module Google
         end
       end
       
+      # Represents a RecoverableSnapshot resource.
+      # A RecoverableSnapshot represents a snapshot in recycle bin.
+      class RecoverableSnapshot
+        include Google::Apis::Core::Hashable
+      
+        # Output only. [Output Only] Creation timestamp inRFC3339
+        # text format.
+        # Corresponds to the JSON property `creationTimestamp`
+        # @return [String]
+        attr_accessor :creation_timestamp
+      
+        # Optional. An optional description of this resource.
+        # Corresponds to the JSON property `description`
+        # @return [String]
+        attr_accessor :description
+      
+        # Output only. [Output Only] The unique identifier for the resource. This
+        # identifier is
+        # defined by the server.
+        # Corresponds to the JSON property `id`
+        # @return [Fixnum]
+        attr_accessor :id
+      
+        # Output only. [Output Only] Type of the resource. Alwayscompute#
+        # recoverableSnapshot for RecoverableSnapshot
+        # resources.
+        # Corresponds to the JSON property `kind`
+        # @return [String]
+        attr_accessor :kind
+      
+        # Output only. Identifier. Name of the recoverable snapshot generated on the
+        # deletion of the snapshot.
+        # The name will be 1-63 characters long, and comply withRFC1035.
+        # Specifically, the name will be 1-63 characters long and match the regular
+        # expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first
+        # character will be a lowercase letter, and all following characters can be
+        # a dash, lowercase letter, or digit, except the last character, which cannot
+        # be a dash.
+        # Corresponds to the JSON property `name`
+        # @return [String]
+        attr_accessor :name
+      
+        # Output only. Output Only] The original snapshot resource.
+        # Corresponds to the JSON property `originalResource`
+        # @return [Google::Apis::ComputeBeta::RecoverableSnapshotOriginalSnapshot]
+        attr_accessor :original_resource
+      
+        # Output only. [Output Only] Purge timestamp of recoverable snapshot inRFC3339
+        # text format.
+        # Corresponds to the JSON property `purgeTimestamp`
+        # @return [String]
+        attr_accessor :purge_timestamp
+      
+        # Output only. [Output Only] Reserved for future use.
+        # Corresponds to the JSON property `satisfiesPzi`
+        # @return [Boolean]
+        attr_accessor :satisfies_pzi
+        alias_method :satisfies_pzi?, :satisfies_pzi
+      
+        # Output only. [Output Only] Reserved for future use.
+        # Corresponds to the JSON property `satisfiesPzs`
+        # @return [Boolean]
+        attr_accessor :satisfies_pzs
+        alias_method :satisfies_pzs?, :satisfies_pzs
+      
+        # Output only. [Output Only] Server-defined URL for the resource.
+        # Corresponds to the JSON property `selfLink`
+        # @return [String]
+        attr_accessor :self_link
+      
+        # Output only. [Output Only] Server-defined URL for this resource's resource id.
+        # Corresponds to the JSON property `selfLinkWithId`
+        # @return [String]
+        attr_accessor :self_link_with_id
+      
+        # Output only. [Output Only] Status of the recoverable snapshot.
+        # Corresponds to the JSON property `status`
+        # @return [String]
+        attr_accessor :status
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @creation_timestamp = args[:creation_timestamp] if args.key?(:creation_timestamp)
+          @description = args[:description] if args.key?(:description)
+          @id = args[:id] if args.key?(:id)
+          @kind = args[:kind] if args.key?(:kind)
+          @name = args[:name] if args.key?(:name)
+          @original_resource = args[:original_resource] if args.key?(:original_resource)
+          @purge_timestamp = args[:purge_timestamp] if args.key?(:purge_timestamp)
+          @satisfies_pzi = args[:satisfies_pzi] if args.key?(:satisfies_pzi)
+          @satisfies_pzs = args[:satisfies_pzs] if args.key?(:satisfies_pzs)
+          @self_link = args[:self_link] if args.key?(:self_link)
+          @self_link_with_id = args[:self_link_with_id] if args.key?(:self_link_with_id)
+          @status = args[:status] if args.key?(:status)
+        end
+      end
+      
+      # 
+      class RecoverableSnapshotList
+        include Google::Apis::Core::Hashable
+      
+        # 
+        # Corresponds to the JSON property `etag`
+        # @return [String]
+        attr_accessor :etag
+      
+        # [Output Only] Unique identifier for the resource; defined by the server.
+        # Corresponds to the JSON property `id`
+        # @return [String]
+        attr_accessor :id
+      
+        # A list of RecoverableSnapshots resources.
+        # Corresponds to the JSON property `items`
+        # @return [Array<Google::Apis::ComputeBeta::RecoverableSnapshot>]
+        attr_accessor :items
+      
+        # Output only. [Output Only] Type of resource. Alwayscompute#
+        # recoverableSnapshotList for lists of
+        # recoverablesnapshots.
+        # Corresponds to the JSON property `kind`
+        # @return [String]
+        attr_accessor :kind
+      
+        # [Output Only] This token allows you to get the next page of results for
+        # list requests. If the number of results is larger thanmaxResults, use the
+        # nextPageToken as a value for
+        # the query parameter pageToken in the next list request.
+        # Subsequent list requests will have their own nextPageToken to
+        # continue paging through the results.
+        # Corresponds to the JSON property `nextPageToken`
+        # @return [String]
+        attr_accessor :next_page_token
+      
+        # Output only. [Output Only] Server-defined URL for this resource.
+        # Corresponds to the JSON property `selfLink`
+        # @return [String]
+        attr_accessor :self_link
+      
+        # Output only. [Output Only] Unreachable resources.
+        # end_interface: MixerListResponseWithEtagBuilder
+        # Corresponds to the JSON property `unreachables`
+        # @return [Array<String>]
+        attr_accessor :unreachables
+      
+        # [Output Only] Informational warning message.
+        # Corresponds to the JSON property `warning`
+        # @return [Google::Apis::ComputeBeta::RecoverableSnapshotList::Warning]
+        attr_accessor :warning
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @etag = args[:etag] if args.key?(:etag)
+          @id = args[:id] if args.key?(:id)
+          @items = args[:items] if args.key?(:items)
+          @kind = args[:kind] if args.key?(:kind)
+          @next_page_token = args[:next_page_token] if args.key?(:next_page_token)
+          @self_link = args[:self_link] if args.key?(:self_link)
+          @unreachables = args[:unreachables] if args.key?(:unreachables)
+          @warning = args[:warning] if args.key?(:warning)
+        end
+        
+        # [Output Only] Informational warning message.
+        class Warning
+          include Google::Apis::Core::Hashable
+        
+          # [Output Only] A warning code, if applicable. For example, Compute
+          # Engine returns NO_RESULTS_ON_PAGE if there
+          # are no results in the response.
+          # Corresponds to the JSON property `code`
+          # @return [String]
+          attr_accessor :code
+        
+          # [Output Only] Metadata about this warning in key:
+          # value format. For example:
+          # "data": [
+          # `
+          # "key": "scope",
+          # "value": "zones/us-east1-d"
+          # `]
+          # Corresponds to the JSON property `data`
+          # @return [Array<Google::Apis::ComputeBeta::RecoverableSnapshotList::Warning::Datum>]
+          attr_accessor :data
+        
+          # [Output Only] A human-readable description of the warning code.
+          # Corresponds to the JSON property `message`
+          # @return [String]
+          attr_accessor :message
+        
+          def initialize(**args)
+             update!(**args)
+          end
+        
+          # Update properties of this object
+          def update!(**args)
+            @code = args[:code] if args.key?(:code)
+            @data = args[:data] if args.key?(:data)
+            @message = args[:message] if args.key?(:message)
+          end
+          
+          # 
+          class Datum
+            include Google::Apis::Core::Hashable
+          
+            # [Output Only] A key that provides more detail on the warning being
+            # returned. For example, for warnings where there are no results in a list
+            # request for a particular zone, this key might be scope and
+            # the key value might be the zone name. Other examples might be a key
+            # indicating a deprecated resource and a suggested replacement, or a
+            # warning about invalid network settings (for example, if an instance
+            # attempts to perform IP forwarding but is not enabled for IP forwarding).
+            # Corresponds to the JSON property `key`
+            # @return [String]
+            attr_accessor :key
+          
+            # [Output Only] A warning data value corresponding to the key.
+            # Corresponds to the JSON property `value`
+            # @return [String]
+            attr_accessor :value
+          
+            def initialize(**args)
+               update!(**args)
+            end
+          
+            # Update properties of this object
+            def update!(**args)
+              @key = args[:key] if args.key?(:key)
+              @value = args[:value] if args.key?(:value)
+            end
+          end
+        end
+      end
+      
+      # 
+      class RecoverableSnapshotOriginalSnapshot
+        include Google::Apis::Core::Hashable
+      
+        # Output only. [Output Only] The architecture of the snapshot. Valid values are
+        # ARM64 or X86_64.
+        # Corresponds to the JSON property `architecture`
+        # @return [String]
+        attr_accessor :architecture
+      
+        # Output only. [Output Only] Set to true if snapshots are automatically created
+        # by
+        # applying resource policy on the target disk.
+        # Corresponds to the JSON property `autoCreated`
+        # @return [Boolean]
+        attr_accessor :auto_created
+        alias_method :auto_created?, :auto_created
+      
+        # Creates the new snapshot in the snapshot chain labeled with the
+        # specified name. The chain name must be 1-63 characters long and comply
+        # with RFC1035. This is an uncommon option only for advanced service
+        # owners who needs to create separate snapshot chains, for example,
+        # for chargeback tracking. When you describe your snapshot resource, this
+        # field is visible only if it has a non-empty value.
+        # Corresponds to the JSON property `chainName`
+        # @return [String]
+        attr_accessor :chain_name
+      
+        # Output only. [Output Only] Size in bytes of the snapshot at creation time.
+        # Corresponds to the JSON property `creationSizeBytes`
+        # @return [Fixnum]
+        attr_accessor :creation_size_bytes
+      
+        # Output only. [Output Only] Creation timestamp inRFC3339 text format.
+        # Corresponds to the JSON property `creationTimestamp`
+        # @return [String]
+        attr_accessor :creation_timestamp
+      
+        # Output only. [Output Only] Deletion timestamp of snapshot inRFC3339 text
+        # format.
+        # Corresponds to the JSON property `deletionTimestamp`
+        # @return [String]
+        attr_accessor :deletion_timestamp
+      
+        # An optional description of this resource.
+        # Corresponds to the JSON property `description`
+        # @return [String]
+        attr_accessor :description
+      
+        # Output only. [Output Only] Size of the source disk, specified in GB.
+        # Corresponds to the JSON property `diskSizeGb`
+        # @return [Fixnum]
+        attr_accessor :disk_size_gb
+      
+        # Output only. [Output Only] Number of bytes downloaded to restore a snapshot to
+        # a disk.
+        # Corresponds to the JSON property `downloadBytes`
+        # @return [Fixnum]
+        attr_accessor :download_bytes
+      
+        # Output only. Whether this snapshot is created from a confidential compute mode
+        # disk.
+        # [Output Only]: This field is not set by user, but from source disk.
+        # Corresponds to the JSON property `enableConfidentialCompute`
+        # @return [Boolean]
+        attr_accessor :enable_confidential_compute
+        alias_method :enable_confidential_compute?, :enable_confidential_compute
+      
+        # Output only. [Output Only] A list of features to enable on the guest operating
+        # system.
+        # Applicable only for bootable images. Read
+        # Enabling guest operating system features to see a list of available
+        # options.
+        # Corresponds to the JSON property `guestOsFeatures`
+        # @return [Array<Google::Apis::ComputeBeta::GuestOsFeature>]
+        attr_accessor :guest_os_features
+      
+        # Output only. [Output Only] The unique identifier for the original snapshot.
+        # This
+        # identifier is defined by the server.
+        # Corresponds to the JSON property `id`
+        # @return [Fixnum]
+        attr_accessor :id
+      
+        # A fingerprint for the labels being applied to this snapshot, which is
+        # essentially a hash of the labels set used for optimistic locking. The
+        # fingerprint is initially generated by Compute Engine and changes after
+        # every request to modify or update labels. You must always provide an
+        # up-to-date fingerprint hash in order to update or change labels,
+        # otherwise the request will fail with error412 conditionNotMet.
+        # To see the latest fingerprint, make a get() request to
+        # retrieve a snapshot.
+        # Corresponds to the JSON property `labelFingerprint`
+        # NOTE: Values are automatically base64 encoded/decoded in the client library.
+        # @return [String]
+        attr_accessor :label_fingerprint
+      
+        # Labels to apply to this snapshot. These can be later modified by
+        # the setLabels method.
+        # Label values may be empty.
+        # Corresponds to the JSON property `labels`
+        # @return [Hash<String,String>]
+        attr_accessor :labels
+      
+        # Output only. [Output Only] Integer license codes indicating which licenses are
+        # attached to this snapshot.
+        # Corresponds to the JSON property `licenseCodes`
+        # @return [Array<Fixnum>]
+        attr_accessor :license_codes
+      
+        # Output only. [Output Only] A list of public visible licenses that apply to
+        # this
+        # snapshot.
+        # Corresponds to the JSON property `licenses`
+        # @return [Array<String>]
+        attr_accessor :licenses
+      
+        # Number of days the snapshot should be retained before being deleted
+        # automatically.
+        # Corresponds to the JSON property `maxRetentionDays`
+        # @return [Fixnum]
+        attr_accessor :max_retention_days
+      
+        # Name of the original snapshot provided by the client. The name must be
+        # 1-63 characters long, and comply with RFC1035.
+        # Specifically, the name must be 1-63 characters long and match the regular
+        # expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first
+        # character must be a lowercase letter, and all following characters must
+        # be a dash, lowercase letter, or digit, except the last character, which
+        # cannot be a dash.
+        # Corresponds to the JSON property `name`
+        # @return [String]
+        attr_accessor :name
+      
+        # Output only. [Output Only] URL of the region where the snapshot resides. Only
+        # applicable for regional snapshots.
+        # Corresponds to the JSON property `region`
+        # @return [String]
+        attr_accessor :region
+      
+        # Output only. Reserved for future use.
+        # Corresponds to the JSON property `satisfiesPzi`
+        # @return [Boolean]
+        attr_accessor :satisfies_pzi
+        alias_method :satisfies_pzi?, :satisfies_pzi
+      
+        # Output only. [Output Only] Reserved for future use.
+        # Corresponds to the JSON property `satisfiesPzs`
+        # @return [Boolean]
+        attr_accessor :satisfies_pzs
+        alias_method :satisfies_pzs?, :satisfies_pzs
+      
+        # Output only. [Output Only] Server-defined URL for the resource.
+        # Corresponds to the JSON property `selfLink`
+        # @return [String]
+        attr_accessor :self_link
+      
+        # Output only. [Output Only] Server-defined URL for this resource's resource id.
+        # Corresponds to the JSON property `selfLinkWithId`
+        # @return [String]
+        attr_accessor :self_link_with_id
+      
+        # Encrypts the snapshot using acustomer-supplied
+        # encryption key.
+        # After you encrypt a snapshot using a customer-supplied key, you must
+        # provide the same key if you use the snapshot later. For example, you must
+        # provide the encryption key when you create a disk from the encrypted
+        # snapshot in a future request.
+        # Customer-supplied encryption keys do not protect access to metadata
+        # of the snapshot.
+        # If you do not provide an encryption key when creating the snapshot, then
+        # the snapshot will be encrypted using an automatically generated key and
+        # you do not need to provide a key to use the snapshot later.
+        # Corresponds to the JSON property `snapshotEncryptionKey`
+        # @return [Google::Apis::ComputeBeta::CustomerEncryptionKey]
+        attr_accessor :snapshot_encryption_key
+      
+        # Output only. [Output Only] The unique ID of the snapshot group that this
+        # snapshot
+        # belongs to. The usage of snapshot group feature is restricted.
+        # Corresponds to the JSON property `snapshotGroupId`
+        # @return [String]
+        attr_accessor :snapshot_group_id
+      
+        # Output only. [Output only] The snapshot group that this snapshot belongs to.
+        # The usage
+        # of snapshot group feature is restricted.
+        # Corresponds to the JSON property `snapshotGroupName`
+        # @return [String]
+        attr_accessor :snapshot_group_name
+      
+        # Indicates the type of the snapshot.
+        # Corresponds to the JSON property `snapshotType`
+        # @return [String]
+        attr_accessor :snapshot_type
+      
+        # The source disk used to create this snapshot.
+        # Corresponds to the JSON property `sourceDisk`
+        # @return [String]
+        attr_accessor :source_disk
+      
+        # The customer-supplied
+        # encryption key of the source disk. Required if the source disk is
+        # protected by a customer-supplied encryption key.
+        # Corresponds to the JSON property `sourceDiskEncryptionKey`
+        # @return [Google::Apis::ComputeBeta::CustomerEncryptionKey]
+        attr_accessor :source_disk_encryption_key
+      
+        # The source disk whose recovery checkpoint will be used to create this
+        # snapshot.
+        # Corresponds to the JSON property `sourceDiskForRecoveryCheckpoint`
+        # @return [String]
+        attr_accessor :source_disk_for_recovery_checkpoint
+      
+        # Output only. [Output Only] The ID value of the disk used to create this
+        # snapshot
+        # Corresponds to the JSON property `sourceDiskId`
+        # @return [String]
+        attr_accessor :source_disk_id
+      
+        # The source instant snapshot used to create this snapshot.
+        # Corresponds to the JSON property `sourceInstantSnapshot`
+        # @return [String]
+        attr_accessor :source_instant_snapshot
+      
+        # Customer provided encryption key when creating Snapshot from Instant
+        # Snapshot.
+        # Corresponds to the JSON property `sourceInstantSnapshotEncryptionKey`
+        # @return [Google::Apis::ComputeBeta::CustomerEncryptionKey]
+        attr_accessor :source_instant_snapshot_encryption_key
+      
+        # Output only. [Output Only] The unique ID of the instant snapshot used to
+        # create this
+        # snapshot. This value identifies the exact instant snapshot that was used
+        # to create this persistent disk. For example, if you created the
+        # persistent disk from an instant snapshot that was later deleted and
+        # recreated under the same name, the source instant snapshot ID would
+        # identify the exact instant snapshot that was used.
+        # Corresponds to the JSON property `sourceInstantSnapshotId`
+        # @return [String]
+        attr_accessor :source_instant_snapshot_id
+      
+        # Output only. [Output Only] URL of the resource policy which created this
+        # scheduled snapshot.
+        # Corresponds to the JSON property `sourceSnapshotSchedulePolicy`
+        # @return [String]
+        attr_accessor :source_snapshot_schedule_policy
+      
+        # Output only. [Output Only] ID of the resource policy which created this
+        # scheduled snapshot.
+        # Corresponds to the JSON property `sourceSnapshotSchedulePolicyId`
+        # @return [String]
+        attr_accessor :source_snapshot_schedule_policy_id
+      
+        # Output only. [Output Only] A size of the storage used by the snapshot.
+        # Corresponds to the JSON property `storageBytes`
+        # @return [Fixnum]
+        attr_accessor :storage_bytes
+      
+        # Output only. [Deprecated] Instead, check the storageBytes field. After
+        # snapshot creation, the storageBytesStatus field is alwaysUP_TO_DATE.
+        # [Output Only] An indicator whether storageBytes is in a
+        # stable state or it is being adjusted as a result of shared storage
+        # reallocation. This status can either be unset, meaning the snapshot is
+        # being created, or UP_TO_DATE, meaning the size of the
+        # snapshot is up-to-date.
+        # Corresponds to the JSON property `storageBytesStatus`
+        # @return [String]
+        attr_accessor :storage_bytes_status
+      
+        # Cloud Storage bucket storage location of the snapshot (regional or
+        # multi-regional).
+        # Corresponds to the JSON property `storageLocations`
+        # @return [Array<String>]
+        attr_accessor :storage_locations
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @architecture = args[:architecture] if args.key?(:architecture)
+          @auto_created = args[:auto_created] if args.key?(:auto_created)
+          @chain_name = args[:chain_name] if args.key?(:chain_name)
+          @creation_size_bytes = args[:creation_size_bytes] if args.key?(:creation_size_bytes)
+          @creation_timestamp = args[:creation_timestamp] if args.key?(:creation_timestamp)
+          @deletion_timestamp = args[:deletion_timestamp] if args.key?(:deletion_timestamp)
+          @description = args[:description] if args.key?(:description)
+          @disk_size_gb = args[:disk_size_gb] if args.key?(:disk_size_gb)
+          @download_bytes = args[:download_bytes] if args.key?(:download_bytes)
+          @enable_confidential_compute = args[:enable_confidential_compute] if args.key?(:enable_confidential_compute)
+          @guest_os_features = args[:guest_os_features] if args.key?(:guest_os_features)
+          @id = args[:id] if args.key?(:id)
+          @label_fingerprint = args[:label_fingerprint] if args.key?(:label_fingerprint)
+          @labels = args[:labels] if args.key?(:labels)
+          @license_codes = args[:license_codes] if args.key?(:license_codes)
+          @licenses = args[:licenses] if args.key?(:licenses)
+          @max_retention_days = args[:max_retention_days] if args.key?(:max_retention_days)
+          @name = args[:name] if args.key?(:name)
+          @region = args[:region] if args.key?(:region)
+          @satisfies_pzi = args[:satisfies_pzi] if args.key?(:satisfies_pzi)
+          @satisfies_pzs = args[:satisfies_pzs] if args.key?(:satisfies_pzs)
+          @self_link = args[:self_link] if args.key?(:self_link)
+          @self_link_with_id = args[:self_link_with_id] if args.key?(:self_link_with_id)
+          @snapshot_encryption_key = args[:snapshot_encryption_key] if args.key?(:snapshot_encryption_key)
+          @snapshot_group_id = args[:snapshot_group_id] if args.key?(:snapshot_group_id)
+          @snapshot_group_name = args[:snapshot_group_name] if args.key?(:snapshot_group_name)
+          @snapshot_type = args[:snapshot_type] if args.key?(:snapshot_type)
+          @source_disk = args[:source_disk] if args.key?(:source_disk)
+          @source_disk_encryption_key = args[:source_disk_encryption_key] if args.key?(:source_disk_encryption_key)
+          @source_disk_for_recovery_checkpoint = args[:source_disk_for_recovery_checkpoint] if args.key?(:source_disk_for_recovery_checkpoint)
+          @source_disk_id = args[:source_disk_id] if args.key?(:source_disk_id)
+          @source_instant_snapshot = args[:source_instant_snapshot] if args.key?(:source_instant_snapshot)
+          @source_instant_snapshot_encryption_key = args[:source_instant_snapshot_encryption_key] if args.key?(:source_instant_snapshot_encryption_key)
+          @source_instant_snapshot_id = args[:source_instant_snapshot_id] if args.key?(:source_instant_snapshot_id)
+          @source_snapshot_schedule_policy = args[:source_snapshot_schedule_policy] if args.key?(:source_snapshot_schedule_policy)
+          @source_snapshot_schedule_policy_id = args[:source_snapshot_schedule_policy_id] if args.key?(:source_snapshot_schedule_policy_id)
+          @storage_bytes = args[:storage_bytes] if args.key?(:storage_bytes)
+          @storage_bytes_status = args[:storage_bytes_status] if args.key?(:storage_bytes_status)
+          @storage_locations = args[:storage_locations] if args.key?(:storage_locations)
+        end
+      end
+      
       # Represents a reference to a resource.
       class Reference
         include Google::Apis::Core::Hashable
@@ -49581,7 +51209,7 @@ module Google
       class RegexRewrite
         include Google::Apis::Core::Hashable
       
-        # The regular expression used to match against the URL path.
+        # Required. The regular expression used to match against the URL path.
         # It uses RE2 syntax with the following constraints:
         # 
         # 
@@ -49609,7 +51237,8 @@ module Google
         # @return [String]
         attr_accessor :path_pattern
       
-        # Required when path pattern is specified. Used to rewrite matching parts of
+        # Required. Required when path pattern is specified. Used to rewrite matching
+        # parts of
         # the path.
         # Corresponds to the JSON property `pathSubstitution`
         # @return [String]
@@ -63672,157 +65301,333 @@ module Google
         end
       end
       
-      # Represents a SnapshotGroup resource.
-      # A snapshot group is a set of snapshots that represents a point in time state
-      # of a consistency group.
-      class SnapshotGroup
-        include Google::Apis::Core::Hashable
-      
-        # Output only. [Output Only] Creation timestamp inRFC3339
-        # text format.
-        # Corresponds to the JSON property `creationTimestamp`
-        # @return [String]
-        attr_accessor :creation_timestamp
-      
-        # Optional. An optional description of this resource. Provide this property when
-        # you
-        # create the resource.
-        # Corresponds to the JSON property `description`
-        # @return [String]
-        attr_accessor :description
-      
-        # Output only. [Output Only] The unique identifier for the resource. This
-        # identifier is
-        # defined by the server.
-        # Corresponds to the JSON property `id`
-        # @return [Fixnum]
-        attr_accessor :id
-      
-        # Output only. [Output Only] Type of the resource. Alwayscompute#snapshotGroup
-        # for SnapshotGroup
-        # resources.
-        # Corresponds to the JSON property `kind`
-        # @return [String]
-        attr_accessor :kind
-      
-        # Identifier. Name of the resource; provided by the client when the resource is
-        # created.
-        # The name must be 1-63 characters long, and comply withRFC1035.
-        # Specifically, the name must be 1-63 characters long and match the regular
-        # expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first
-        # character must be a lowercase letter, and all following characters must be
-        # a dash, lowercase letter, or digit, except the last character, which cannot
-        # be a dash.
-        # Corresponds to the JSON property `name`
-        # @return [String]
-        attr_accessor :name
-      
-        # Output only. [Output Only] Server-defined URL for the resource.
-        # Corresponds to the JSON property `selfLink`
-        # @return [String]
-        attr_accessor :self_link
-      
-        # Output only. [Output Only] Server-defined URL for this resource's resource id.
-        # Corresponds to the JSON property `selfLinkWithId`
-        # @return [String]
-        attr_accessor :self_link_with_id
-      
-        # Output only. [Output Only]
-        # Corresponds to the JSON property `sourceInfo`
-        # @return [Google::Apis::ComputeBeta::SnapshotGroupSourceInfo]
-        attr_accessor :source_info
-      
-        # Input field for the source instant snapshot group.
-        # Corresponds to the JSON property `sourceInstantSnapshotGroup`
-        # @return [String]
-        attr_accessor :source_instant_snapshot_group
-      
-        # Output only. [Output Only]
-        # Corresponds to the JSON property `sourceInstantSnapshotGroupInfo`
-        # @return [Google::Apis::ComputeBeta::SnapshotGroupSourceInstantSnapshotGroupInfo]
-        attr_accessor :source_instant_snapshot_group_info
-      
-        # Output only. [Output Only]
-        # Corresponds to the JSON property `status`
-        # @return [String]
-        attr_accessor :status
-      
-        def initialize(**args)
-           update!(**args)
-        end
-      
-        # Update properties of this object
-        def update!(**args)
-          @creation_timestamp = args[:creation_timestamp] if args.key?(:creation_timestamp)
-          @description = args[:description] if args.key?(:description)
-          @id = args[:id] if args.key?(:id)
-          @kind = args[:kind] if args.key?(:kind)
-          @name = args[:name] if args.key?(:name)
-          @self_link = args[:self_link] if args.key?(:self_link)
-          @self_link_with_id = args[:self_link_with_id] if args.key?(:self_link_with_id)
-          @source_info = args[:source_info] if args.key?(:source_info)
-          @source_instant_snapshot_group = args[:source_instant_snapshot_group] if args.key?(:source_instant_snapshot_group)
-          @source_instant_snapshot_group_info = args[:source_instant_snapshot_group_info] if args.key?(:source_instant_snapshot_group_info)
-          @status = args[:status] if args.key?(:status)
-        end
-      end
-      
-      # 
-      class SnapshotGroupParameters
-        include Google::Apis::Core::Hashable
-      
-        # URLs of the zones where disks should be replicated to. Only applicable
-        # for regional resources.
-        # Corresponds to the JSON property `replicaZones`
-        # @return [Array<String>]
-        attr_accessor :replica_zones
-      
-        # The source snapshot group used to create disks. You can provide this as a
-        # partial or full URL to the resource. For example, the following are valid
-        # values:
-        # 
-        # 
-        # - https://www.googleapis.com/compute/v1/projects/project/global/
-        # snapshotGroups/snapshotGroup
-        # - projects/project/global/snapshotGroups/snapshotGroup
-        # - global/snapshotGroups/snapshotGroup
-        # Corresponds to the JSON property `sourceSnapshotGroup`
-        # @return [String]
-        attr_accessor :source_snapshot_group
-      
-        # URL of the disk type resource describing which disk type to use to create
-        # disks. Provide this when creating the disk. For example:projects/project/zones/
-        # zone/diskTypes/pd-ssd. See Persistent disk
-        # types.
-        # Corresponds to the JSON property `type`
-        # @return [String]
-        attr_accessor :type
-      
-        def initialize(**args)
-           update!(**args)
-        end
-      
-        # Update properties of this object
-        def update!(**args)
-          @replica_zones = args[:replica_zones] if args.key?(:replica_zones)
-          @source_snapshot_group = args[:source_snapshot_group] if args.key?(:source_snapshot_group)
-          @type = args[:type] if args.key?(:type)
-        end
-      end
-      
-      # 
-      class SnapshotGroupSourceInfo
+      # Represents a SnapshotGroup resource.
+      # A snapshot group is a set of snapshots that represents a point in time state
+      # of a consistency group.
+      class SnapshotGroup
+        include Google::Apis::Core::Hashable
+      
+        # Output only. [Output Only] Creation timestamp inRFC3339
+        # text format.
+        # Corresponds to the JSON property `creationTimestamp`
+        # @return [String]
+        attr_accessor :creation_timestamp
+      
+        # Optional. An optional description of this resource. Provide this property when
+        # you
+        # create the resource.
+        # Corresponds to the JSON property `description`
+        # @return [String]
+        attr_accessor :description
+      
+        # Output only. [Output Only] The unique identifier for the resource. This
+        # identifier is
+        # defined by the server.
+        # Corresponds to the JSON property `id`
+        # @return [Fixnum]
+        attr_accessor :id
+      
+        # Output only. [Output Only] Type of the resource. Alwayscompute#snapshotGroup
+        # for SnapshotGroup
+        # resources.
+        # Corresponds to the JSON property `kind`
+        # @return [String]
+        attr_accessor :kind
+      
+        # Identifier. Name of the resource; provided by the client when the resource is
+        # created.
+        # The name must be 1-63 characters long, and comply withRFC1035.
+        # Specifically, the name must be 1-63 characters long and match the regular
+        # expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first
+        # character must be a lowercase letter, and all following characters must be
+        # a dash, lowercase letter, or digit, except the last character, which cannot
+        # be a dash.
+        # Corresponds to the JSON property `name`
+        # @return [String]
+        attr_accessor :name
+      
+        # Output only. [Output Only] Server-defined URL for the resource.
+        # Corresponds to the JSON property `selfLink`
+        # @return [String]
+        attr_accessor :self_link
+      
+        # Output only. [Output Only] Server-defined URL for this resource's resource id.
+        # Corresponds to the JSON property `selfLinkWithId`
+        # @return [String]
+        attr_accessor :self_link_with_id
+      
+        # Output only. [Output Only]
+        # Corresponds to the JSON property `sourceInfo`
+        # @return [Google::Apis::ComputeBeta::SnapshotGroupSourceInfo]
+        attr_accessor :source_info
+      
+        # Input field for the source instant snapshot group.
+        # Corresponds to the JSON property `sourceInstantSnapshotGroup`
+        # @return [String]
+        attr_accessor :source_instant_snapshot_group
+      
+        # Output only. [Output Only]
+        # Corresponds to the JSON property `sourceInstantSnapshotGroupInfo`
+        # @return [Google::Apis::ComputeBeta::SnapshotGroupSourceInstantSnapshotGroupInfo]
+        attr_accessor :source_instant_snapshot_group_info
+      
+        # Output only. [Output Only]
+        # Corresponds to the JSON property `status`
+        # @return [String]
+        attr_accessor :status
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @creation_timestamp = args[:creation_timestamp] if args.key?(:creation_timestamp)
+          @description = args[:description] if args.key?(:description)
+          @id = args[:id] if args.key?(:id)
+          @kind = args[:kind] if args.key?(:kind)
+          @name = args[:name] if args.key?(:name)
+          @self_link = args[:self_link] if args.key?(:self_link)
+          @self_link_with_id = args[:self_link_with_id] if args.key?(:self_link_with_id)
+          @source_info = args[:source_info] if args.key?(:source_info)
+          @source_instant_snapshot_group = args[:source_instant_snapshot_group] if args.key?(:source_instant_snapshot_group)
+          @source_instant_snapshot_group_info = args[:source_instant_snapshot_group_info] if args.key?(:source_instant_snapshot_group_info)
+          @status = args[:status] if args.key?(:status)
+        end
+      end
+      
+      # 
+      class SnapshotGroupParameters
+        include Google::Apis::Core::Hashable
+      
+        # URLs of the zones where disks should be replicated to. Only applicable
+        # for regional resources.
+        # Corresponds to the JSON property `replicaZones`
+        # @return [Array<String>]
+        attr_accessor :replica_zones
+      
+        # The source snapshot group used to create disks. You can provide this as a
+        # partial or full URL to the resource. For example, the following are valid
+        # values:
+        # 
+        # 
+        # - https://www.googleapis.com/compute/v1/projects/project/global/
+        # snapshotGroups/snapshotGroup
+        # - projects/project/global/snapshotGroups/snapshotGroup
+        # - global/snapshotGroups/snapshotGroup
+        # Corresponds to the JSON property `sourceSnapshotGroup`
+        # @return [String]
+        attr_accessor :source_snapshot_group
+      
+        # URL of the disk type resource describing which disk type to use to create
+        # disks. Provide this when creating the disk. For example:projects/project/zones/
+        # zone/diskTypes/pd-ssd. See Persistent disk
+        # types.
+        # Corresponds to the JSON property `type`
+        # @return [String]
+        attr_accessor :type
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @replica_zones = args[:replica_zones] if args.key?(:replica_zones)
+          @source_snapshot_group = args[:source_snapshot_group] if args.key?(:source_snapshot_group)
+          @type = args[:type] if args.key?(:type)
+        end
+      end
+      
+      # 
+      class SnapshotGroupSourceInfo
+        include Google::Apis::Core::Hashable
+      
+        # 
+        # Corresponds to the JSON property `consistencyGroup`
+        # @return [String]
+        attr_accessor :consistency_group
+      
+        # 
+        # Corresponds to the JSON property `consistencyGroupId`
+        # @return [String]
+        attr_accessor :consistency_group_id
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @consistency_group = args[:consistency_group] if args.key?(:consistency_group)
+          @consistency_group_id = args[:consistency_group_id] if args.key?(:consistency_group_id)
+        end
+      end
+      
+      # 
+      class SnapshotGroupSourceInstantSnapshotGroupInfo
+        include Google::Apis::Core::Hashable
+      
+        # 
+        # Corresponds to the JSON property `instantSnapshotGroup`
+        # @return [String]
+        attr_accessor :instant_snapshot_group
+      
+        # 
+        # Corresponds to the JSON property `instantSnapshotGroupId`
+        # @return [String]
+        attr_accessor :instant_snapshot_group_id
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @instant_snapshot_group = args[:instant_snapshot_group] if args.key?(:instant_snapshot_group)
+          @instant_snapshot_group_id = args[:instant_snapshot_group_id] if args.key?(:instant_snapshot_group_id)
+        end
+      end
+      
+      # Contains a list of Snapshot resources.
+      class SnapshotList
+        include Google::Apis::Core::Hashable
+      
+        # [Output Only] Unique identifier for the resource; defined by the server.
+        # Corresponds to the JSON property `id`
+        # @return [String]
+        attr_accessor :id
+      
+        # A list of Snapshot resources.
+        # Corresponds to the JSON property `items`
+        # @return [Array<Google::Apis::ComputeBeta::Snapshot>]
+        attr_accessor :items
+      
+        # Output only. Type of resource.
+        # Corresponds to the JSON property `kind`
+        # @return [String]
+        attr_accessor :kind
+      
+        # [Output Only] This token allows you to get the next page of results for
+        # list requests. If the number of results is larger thanmaxResults, use the
+        # nextPageToken as a value for
+        # the query parameter pageToken in the next list request.
+        # Subsequent list requests will have their own nextPageToken to
+        # continue paging through the results.
+        # Corresponds to the JSON property `nextPageToken`
+        # @return [String]
+        attr_accessor :next_page_token
+      
+        # Output only. [Output Only] Server-defined URL for this resource.
+        # Corresponds to the JSON property `selfLink`
+        # @return [String]
+        attr_accessor :self_link
+      
+        # [Output Only] Informational warning message.
+        # Corresponds to the JSON property `warning`
+        # @return [Google::Apis::ComputeBeta::SnapshotList::Warning]
+        attr_accessor :warning
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @id = args[:id] if args.key?(:id)
+          @items = args[:items] if args.key?(:items)
+          @kind = args[:kind] if args.key?(:kind)
+          @next_page_token = args[:next_page_token] if args.key?(:next_page_token)
+          @self_link = args[:self_link] if args.key?(:self_link)
+          @warning = args[:warning] if args.key?(:warning)
+        end
+        
+        # [Output Only] Informational warning message.
+        class Warning
+          include Google::Apis::Core::Hashable
+        
+          # [Output Only] A warning code, if applicable. For example, Compute
+          # Engine returns NO_RESULTS_ON_PAGE if there
+          # are no results in the response.
+          # Corresponds to the JSON property `code`
+          # @return [String]
+          attr_accessor :code
+        
+          # [Output Only] Metadata about this warning in key:
+          # value format. For example:
+          # "data": [
+          # `
+          # "key": "scope",
+          # "value": "zones/us-east1-d"
+          # `]
+          # Corresponds to the JSON property `data`
+          # @return [Array<Google::Apis::ComputeBeta::SnapshotList::Warning::Datum>]
+          attr_accessor :data
+        
+          # [Output Only] A human-readable description of the warning code.
+          # Corresponds to the JSON property `message`
+          # @return [String]
+          attr_accessor :message
+        
+          def initialize(**args)
+             update!(**args)
+          end
+        
+          # Update properties of this object
+          def update!(**args)
+            @code = args[:code] if args.key?(:code)
+            @data = args[:data] if args.key?(:data)
+            @message = args[:message] if args.key?(:message)
+          end
+          
+          # 
+          class Datum
+            include Google::Apis::Core::Hashable
+          
+            # [Output Only] A key that provides more detail on the warning being
+            # returned. For example, for warnings where there are no results in a list
+            # request for a particular zone, this key might be scope and
+            # the key value might be the zone name. Other examples might be a key
+            # indicating a deprecated resource and a suggested replacement, or a
+            # warning about invalid network settings (for example, if an instance
+            # attempts to perform IP forwarding but is not enabled for IP forwarding).
+            # Corresponds to the JSON property `key`
+            # @return [String]
+            attr_accessor :key
+          
+            # [Output Only] A warning data value corresponding to the key.
+            # Corresponds to the JSON property `value`
+            # @return [String]
+            attr_accessor :value
+          
+            def initialize(**args)
+               update!(**args)
+            end
+          
+            # Update properties of this object
+            def update!(**args)
+              @key = args[:key] if args.key?(:key)
+              @value = args[:value] if args.key?(:value)
+            end
+          end
+        end
+      end
+      
+      # Additional snapshot params.
+      class SnapshotParams
         include Google::Apis::Core::Hashable
       
-        # 
-        # Corresponds to the JSON property `consistencyGroup`
-        # @return [String]
-        attr_accessor :consistency_group
-      
-        # 
-        # Corresponds to the JSON property `consistencyGroupId`
-        # @return [String]
-        attr_accessor :consistency_group_id
+        # Input only. Resource manager tags to be bound to the snapshot. Tag keys and
+        # values have
+        # the same definition as resource
+        # manager tags. Keys and values can be either in numeric format,
+        # such as `tagKeys/`tag_key_id`` and `tagValues/`tag_value_id`` or in
+        # namespaced format such as ``org_id|project_id`/`tag_key_short_name`` and
+        # ``tag_value_short_name``. The field is ignored (both PUT &
+        # PATCH) when empty.
+        # Corresponds to the JSON property `resourceManagerTags`
+        # @return [Hash<String,String>]
+        attr_accessor :resource_manager_tags
       
         def initialize(**args)
            update!(**args)
@@ -63830,24 +65635,37 @@ module Google
       
         # Update properties of this object
         def update!(**args)
-          @consistency_group = args[:consistency_group] if args.key?(:consistency_group)
-          @consistency_group_id = args[:consistency_group_id] if args.key?(:consistency_group_id)
+          @resource_manager_tags = args[:resource_manager_tags] if args.key?(:resource_manager_tags)
         end
       end
       
-      # 
-      class SnapshotGroupSourceInstantSnapshotGroupInfo
+      # Represents the singleton resource Snapshot Recycle Bin Policy that
+      # configures the retention duration for snapshots in the recycle bin.
+      # You can configure the retention duration for snapshots in the recycle bin
+      # at the project or organization level. If you configure the policy at the
+      # organization level, all projects in that organization will share the same
+      # policy. If you configure the policy at the project level it will be merged
+      # with org level policy (if any) and the snapshots in that project will use
+      # that policy.
+      class SnapshotRecycleBinPolicy
         include Google::Apis::Core::Hashable
       
-        # 
-        # Corresponds to the JSON property `instantSnapshotGroup`
-        # @return [String]
-        attr_accessor :instant_snapshot_group
+        # The rules for the snapshot recycle bin policy. The key is either 'default'
+        # or namespacedName of the TagValue which can be in the format:
+        # ``organization_id`/`tag_key_short_name`/`tag_value_short_name`` or
+        # ``project_id`/`tag_key_short_name`/`tag_value_short_name`` or
+        # ``project_number`/`tag_key_short_name`/`tag_value_short_name``. The default
+        # rule is applied if snapshots do not have any of these tags.
+        # The value is the rule for the key.
+        # Corresponds to the JSON property `rules`
+        # @return [Hash<String,Google::Apis::ComputeBeta::SnapshotRecycleBinPolicyRule>]
+        attr_accessor :rules
       
-        # 
-        # Corresponds to the JSON property `instantSnapshotGroupId`
-        # @return [String]
-        attr_accessor :instant_snapshot_group_id
+        # Output only. The system rules for snapshot recycle bin policy.
+        # Defines the default rule that applies if no customer-defined rule matches.
+        # Corresponds to the JSON property `systemRules`
+        # @return [Hash<String,Google::Apis::ComputeBeta::SnapshotRecycleBinPolicyRule>]
+        attr_accessor :system_rules
       
         def initialize(**args)
            update!(**args)
@@ -63855,49 +65673,19 @@ module Google
       
         # Update properties of this object
         def update!(**args)
-          @instant_snapshot_group = args[:instant_snapshot_group] if args.key?(:instant_snapshot_group)
-          @instant_snapshot_group_id = args[:instant_snapshot_group_id] if args.key?(:instant_snapshot_group_id)
+          @rules = args[:rules] if args.key?(:rules)
+          @system_rules = args[:system_rules] if args.key?(:system_rules)
         end
       end
       
-      # Contains a list of Snapshot resources.
-      class SnapshotList
+      # A rule that defines the retention policy for snapshots in the recycle bin.
+      class SnapshotRecycleBinPolicyRule
         include Google::Apis::Core::Hashable
       
-        # [Output Only] Unique identifier for the resource; defined by the server.
-        # Corresponds to the JSON property `id`
-        # @return [String]
-        attr_accessor :id
-      
-        # A list of Snapshot resources.
-        # Corresponds to the JSON property `items`
-        # @return [Array<Google::Apis::ComputeBeta::Snapshot>]
-        attr_accessor :items
-      
-        # Output only. Type of resource.
-        # Corresponds to the JSON property `kind`
-        # @return [String]
-        attr_accessor :kind
-      
-        # [Output Only] This token allows you to get the next page of results for
-        # list requests. If the number of results is larger thanmaxResults, use the
-        # nextPageToken as a value for
-        # the query parameter pageToken in the next list request.
-        # Subsequent list requests will have their own nextPageToken to
-        # continue paging through the results.
-        # Corresponds to the JSON property `nextPageToken`
-        # @return [String]
-        attr_accessor :next_page_token
-      
-        # Output only. [Output Only] Server-defined URL for this resource.
-        # Corresponds to the JSON property `selfLink`
-        # @return [String]
-        attr_accessor :self_link
-      
-        # [Output Only] Informational warning message.
-        # Corresponds to the JSON property `warning`
-        # @return [Google::Apis::ComputeBeta::SnapshotList::Warning]
-        attr_accessor :warning
+        # The rule config for snapshots in the recycle bin.
+        # Corresponds to the JSON property `standardSnapshots`
+        # @return [Google::Apis::ComputeBeta::SnapshotRecycleBinPolicyRuleRuleConfig]
+        attr_accessor :standard_snapshots
       
         def initialize(**args)
            update!(**args)
@@ -63905,100 +65693,19 @@ module Google
       
         # Update properties of this object
         def update!(**args)
-          @id = args[:id] if args.key?(:id)
-          @items = args[:items] if args.key?(:items)
-          @kind = args[:kind] if args.key?(:kind)
-          @next_page_token = args[:next_page_token] if args.key?(:next_page_token)
-          @self_link = args[:self_link] if args.key?(:self_link)
-          @warning = args[:warning] if args.key?(:warning)
-        end
-        
-        # [Output Only] Informational warning message.
-        class Warning
-          include Google::Apis::Core::Hashable
-        
-          # [Output Only] A warning code, if applicable. For example, Compute
-          # Engine returns NO_RESULTS_ON_PAGE if there
-          # are no results in the response.
-          # Corresponds to the JSON property `code`
-          # @return [String]
-          attr_accessor :code
-        
-          # [Output Only] Metadata about this warning in key:
-          # value format. For example:
-          # "data": [
-          # `
-          # "key": "scope",
-          # "value": "zones/us-east1-d"
-          # `]
-          # Corresponds to the JSON property `data`
-          # @return [Array<Google::Apis::ComputeBeta::SnapshotList::Warning::Datum>]
-          attr_accessor :data
-        
-          # [Output Only] A human-readable description of the warning code.
-          # Corresponds to the JSON property `message`
-          # @return [String]
-          attr_accessor :message
-        
-          def initialize(**args)
-             update!(**args)
-          end
-        
-          # Update properties of this object
-          def update!(**args)
-            @code = args[:code] if args.key?(:code)
-            @data = args[:data] if args.key?(:data)
-            @message = args[:message] if args.key?(:message)
-          end
-          
-          # 
-          class Datum
-            include Google::Apis::Core::Hashable
-          
-            # [Output Only] A key that provides more detail on the warning being
-            # returned. For example, for warnings where there are no results in a list
-            # request for a particular zone, this key might be scope and
-            # the key value might be the zone name. Other examples might be a key
-            # indicating a deprecated resource and a suggested replacement, or a
-            # warning about invalid network settings (for example, if an instance
-            # attempts to perform IP forwarding but is not enabled for IP forwarding).
-            # Corresponds to the JSON property `key`
-            # @return [String]
-            attr_accessor :key
-          
-            # [Output Only] A warning data value corresponding to the key.
-            # Corresponds to the JSON property `value`
-            # @return [String]
-            attr_accessor :value
-          
-            def initialize(**args)
-               update!(**args)
-            end
-          
-            # Update properties of this object
-            def update!(**args)
-              @key = args[:key] if args.key?(:key)
-              @value = args[:value] if args.key?(:value)
-            end
-          end
+          @standard_snapshots = args[:standard_snapshots] if args.key?(:standard_snapshots)
         end
       end
       
-      # Additional snapshot params.
-      class SnapshotParams
+      # The rule config for snapshots in the recycle bin.
+      class SnapshotRecycleBinPolicyRuleRuleConfig
         include Google::Apis::Core::Hashable
       
-        # Input only. Resource manager tags to be bound to the snapshot. Tag keys and
-        # values have
-        # the same definition as resource
-        # manager tags. Keys and values can be either in numeric format,
-        # such as `tagKeys/`tag_key_id`` and `tagValues/`tag_value_id`` or in
-        # namespaced format such as ``org_id|project_id`/`tag_key_short_name`` and
-        # ``tag_value_short_name``. The field is ignored (both PUT &
-        # PATCH) when empty.
-        # Corresponds to the JSON property `resourceManagerTags`
-        # @return [Hash<String,String>]
-        attr_accessor :resource_manager_tags
+        # The retention duration for snapshots in the recycle bin after which the
+        # snapshots are automatically deleted from recycle bin.
+        # Corresponds to the JSON property `retentionDurationDays`
+        # @return [Fixnum]
+        attr_accessor :retention_duration_days
       
         def initialize(**args)
            update!(**args)
@@ -64006,7 +65713,7 @@ module Google
       
         # Update properties of this object
         def update!(**args)
-          @resource_manager_tags = args[:resource_manager_tags] if args.key?(:resource_manager_tags)
+          @retention_duration_days = args[:retention_duration_days] if args.key?(:retention_duration_days)
         end
       end
       
@@ -64155,6 +65862,25 @@ module Google
         end
       end
       
+      # 
+      class SnapshotsGetEffectiveRecycleBinRuleResponse
+        include Google::Apis::Core::Hashable
+      
+        # The retention duration of the snapshot in recycle bin.
+        # Corresponds to the JSON property `retentionDurationDays`
+        # @return [Fixnum]
+        attr_accessor :retention_duration_days
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @retention_duration_days = args[:retention_duration_days] if args.key?(:retention_duration_days)
+        end
+      end
+      
       # 
       class SnapshotsScopedList
         include Google::Apis::Core::Hashable
@@ -70347,7 +72073,8 @@ module Google
         # The server-defined URL for the resource. This field is applicable only when
         # the containing target pool is serving a forwarding rule as the primary
         # pool, and its failoverRatio field is properly set to a value
-        # between [0, 1].backupPool and failoverRatio together define
+        # between [0, 1].
+        # backupPool and failoverRatio together define
         # the fallback behavior of the primary target pool: if the ratio of the
         # healthy instances in the primary pool is at or belowfailoverRatio, traffic
         # arriving at the load-balanced
@@ -74569,6 +76296,63 @@ module Google
         end
       end
       
+      # State of an extension on an instance.
+      class VmExtensionState
+        include Google::Apis::Core::Hashable
+      
+        # The status message of the extension if the extension fails to enforce.
+        # Corresponds to the JSON property `enforcementMsg`
+        # @return [String]
+        attr_accessor :enforcement_msg
+      
+        # The enforcement state of the extension.
+        # If the extension is not enforced yet, then the health status will not be
+        # specified.
+        # Corresponds to the JSON property `enforcementState`
+        # @return [String]
+        attr_accessor :enforcement_state
+      
+        # The health status message of the extension.
+        # Corresponds to the JSON property `healthMsg`
+        # @return [String]
+        attr_accessor :health_msg
+      
+        # The health status of the extension.
+        # Corresponds to the JSON property `healthStatus`
+        # @return [String]
+        attr_accessor :health_status
+      
+        # The name of the extension.
+        # Corresponds to the JSON property `name`
+        # @return [String]
+        attr_accessor :name
+      
+        # The id of the policy that is enforced on the extension.
+        # Corresponds to the JSON property `policyId`
+        # @return [String]
+        attr_accessor :policy_id
+      
+        # The version of the extension.
+        # Corresponds to the JSON property `version`
+        # @return [String]
+        attr_accessor :version
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @enforcement_msg = args[:enforcement_msg] if args.key?(:enforcement_msg)
+          @enforcement_state = args[:enforcement_state] if args.key?(:enforcement_state)
+          @health_msg = args[:health_msg] if args.key?(:health_msg)
+          @health_status = args[:health_status] if args.key?(:health_status)
+          @name = args[:name] if args.key?(:name)
+          @policy_id = args[:policy_id] if args.key?(:policy_id)
+          @version = args[:version] if args.key?(:version)
+        end
+      end
+      
       # Represents a HA VPN gateway.
       # HA VPN is a high-availability (HA) Cloud VPN solution that lets you securely
       # connect your on-premises network to your Google Cloud Virtual Private Cloud