google-api-client 0.39.1 → 0.40.0

data/generated/google/apis/dns_v2beta1/representations.rb

@@ -112,6 +112,12 @@ module Google
         include Google::Apis::Core::JsonObjectSupport
       end
       
+      class ManagedZoneReverseLookupConfig
+        class Representation < Google::Apis::Core::JsonRepresentation; end
+      
+        include Google::Apis::Core::JsonObjectSupport
+      end
+      
       class ManagedZonesListResponse
         class Representation < Google::Apis::Core::JsonRepresentation; end
       
@@ -303,6 +309,8 @@ module Google
       
           property :private_visibility_config, as: 'privateVisibilityConfig', class: Google::Apis::DnsV2beta1::ManagedZonePrivateVisibilityConfig, decorator: Google::Apis::DnsV2beta1::ManagedZonePrivateVisibilityConfig::Representation
       
+          property :reverse_lookup_config, as: 'reverseLookupConfig', class: Google::Apis::DnsV2beta1::ManagedZoneReverseLookupConfig, decorator: Google::Apis::DnsV2beta1::ManagedZoneReverseLookupConfig::Representation
+      
           property :visibility, as: 'visibility'
         end
       end
@@ -330,6 +338,7 @@ module Google
       class ManagedZoneForwardingConfigNameServerTarget
         # @private
         class Representation < Google::Apis::Core::JsonRepresentation
+          property :forwarding_path, as: 'forwardingPath'
           property :ipv4_address, as: 'ipv4Address'
           property :kind, as: 'kind'
         end
@@ -382,6 +391,13 @@ module Google
         end
       end
       
+      class ManagedZoneReverseLookupConfig
+        # @private
+        class Representation < Google::Apis::Core::JsonRepresentation
+          property :kind, as: 'kind'
+        end
+      end
+      
       class ManagedZonesListResponse
         # @private
         class Representation < Google::Apis::Core::JsonRepresentation
@@ -490,6 +506,7 @@ module Google
       class PolicyAlternativeNameServerConfigTargetNameServer
         # @private
         class Representation < Google::Apis::Core::JsonRepresentation
+          property :forwarding_path, as: 'forwardingPath'
           property :ipv4_address, as: 'ipv4Address'
           property :kind, as: 'kind'
         end

data/generated/google/apis/dns_v2beta1/service.rb

@@ -51,16 +51,11 @@ module Google
           @batch_path = 'batch/dns/v2beta1'
         end
         
-        # Atomically update the ResourceRecordSet collection.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] managed_zone
-        #   Identifies the managed zone addressed by this request. Can be the managed zone
-        #   name or id.
         # @param [Google::Apis::DnsV2beta1::Change] change_object
         # @param [String] client_operation_id
-        #   For mutating operation requests only. An optional identifier specified by the
-        #   client. Must be unique for operation resources in the Operations collection.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -95,18 +90,11 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Fetch the representation of an existing Change.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] managed_zone
-        #   Identifies the managed zone addressed by this request. Can be the managed zone
-        #   name or id.
         # @param [String] change_id
-        #   The identifier of the requested change, from a previous
-        #   ResourceRecordSetsChangeResponse.
         # @param [String] client_operation_id
-        #   For mutating operation requests only. An optional identifier specified by the
-        #   client. Must be unique for operation resources in the Operations collection.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -140,22 +128,13 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Enumerate Changes to a ResourceRecordSet collection.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] managed_zone
-        #   Identifies the managed zone addressed by this request. Can be the managed zone
-        #   name or id.
         # @param [Fixnum] max_results
-        #   Optional. Maximum number of results to be returned. If unspecified, the server
-        #   will decide how many results to return.
         # @param [String] page_token
-        #   Optional. A tag returned by a previous list request that was truncated. Use
-        #   this parameter to continue a previous list request.
         # @param [String] sort_by
-        #   Sorting criterion. The only supported value is change sequence.
         # @param [String] sort_order
-        #   Sorting order direction: 'ascending' or 'descending'.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -191,21 +170,12 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Fetch the representation of an existing DnsKey.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] managed_zone
-        #   Identifies the managed zone addressed by this request. Can be the managed zone
-        #   name or id.
         # @param [String] dns_key_id
-        #   The identifier of the requested DnsKey.
         # @param [String] client_operation_id
-        #   For mutating operation requests only. An optional identifier specified by the
-        #   client. Must be unique for operation resources in the Operations collection.
         # @param [String] digest_type
-        #   An optional comma-separated list of digest types to compute and display for
-        #   key signing keys. If omitted, the recommended digest type will be computed and
-        #   displayed.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -240,22 +210,12 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Enumerate DnsKeys to a ResourceRecordSet collection.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] managed_zone
-        #   Identifies the managed zone addressed by this request. Can be the managed zone
-        #   name or id.
         # @param [String] digest_type
-        #   An optional comma-separated list of digest types to compute and display for
-        #   key signing keys. If omitted, the recommended digest type will be computed and
-        #   displayed.
         # @param [Fixnum] max_results
-        #   Optional. Maximum number of results to be returned. If unspecified, the server
-        #   will decide how many results to return.
         # @param [String] page_token
-        #   Optional. A tag returned by a previous list request that was truncated. Use
-        #   this parameter to continue a previous list request.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -290,16 +250,11 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Fetch the representation of an existing Operation.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] managed_zone
-        #   Identifies the managed zone addressed by this request.
         # @param [String] operation
-        #   Identifies the operation addressed by this request.
         # @param [String] client_operation_id
-        #   For mutating operation requests only. An optional identifier specified by the
-        #   client. Must be unique for operation resources in the Operations collection.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -333,19 +288,12 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Enumerate Operations for the given ManagedZone.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] managed_zone
-        #   Identifies the managed zone addressed by this request.
         # @param [Fixnum] max_results
-        #   Optional. Maximum number of results to be returned. If unspecified, the server
-        #   will decide how many results to return.
         # @param [String] page_token
-        #   Optional. A tag returned by a previous list request that was truncated. Use
-        #   this parameter to continue a previous list request.
         # @param [String] sort_by
-        #   Sorting criterion. The only supported values are START_TIME and ID.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -380,13 +328,10 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Create a new ManagedZone.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [Google::Apis::DnsV2beta1::ManagedZone] managed_zone_object
         # @param [String] client_operation_id
-        #   For mutating operation requests only. An optional identifier specified by the
-        #   client. Must be unique for operation resources in the Operations collection.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -420,15 +365,10 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Delete a previously created ManagedZone.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] managed_zone
-        #   Identifies the managed zone addressed by this request. Can be the managed zone
-        #   name or id.
         # @param [String] client_operation_id
-        #   For mutating operation requests only. An optional identifier specified by the
-        #   client. Must be unique for operation resources in the Operations collection.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -459,15 +399,10 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Fetch the representation of an existing ManagedZone.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] managed_zone
-        #   Identifies the managed zone addressed by this request. Can be the managed zone
-        #   name or id.
         # @param [String] client_operation_id
-        #   For mutating operation requests only. An optional identifier specified by the
-        #   client. Must be unique for operation resources in the Operations collection.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -500,17 +435,11 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Enumerate ManagedZones that have been created but not yet deleted.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] dns_name
-        #   Restricts the list to return only zones with this domain name.
         # @param [Fixnum] max_results
-        #   Optional. Maximum number of results to be returned. If unspecified, the server
-        #   will decide how many results to return.
         # @param [String] page_token
-        #   Optional. A tag returned by a previous list request that was truncated. Use
-        #   this parameter to continue a previous list request.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -544,16 +473,11 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Apply a partial update to an existing ManagedZone.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] managed_zone
-        #   Identifies the managed zone addressed by this request. Can be the managed zone
-        #   name or id.
         # @param [Google::Apis::DnsV2beta1::ManagedZone] managed_zone_object
         # @param [String] client_operation_id
-        #   For mutating operation requests only. An optional identifier specified by the
-        #   client. Must be unique for operation resources in the Operations collection.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -588,16 +512,11 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Update an existing ManagedZone.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] managed_zone
-        #   Identifies the managed zone addressed by this request. Can be the managed zone
-        #   name or id.
         # @param [Google::Apis::DnsV2beta1::ManagedZone] managed_zone_object
         # @param [String] client_operation_id
-        #   For mutating operation requests only. An optional identifier specified by the
-        #   client. Must be unique for operation resources in the Operations collection.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -632,13 +551,10 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Create a new Policy
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [Google::Apis::DnsV2beta1::Policy] policy_object
         # @param [String] client_operation_id
-        #   For mutating operation requests only. An optional identifier specified by the
-        #   client. Must be unique for operation resources in the Operations collection.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -672,15 +588,10 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Delete a previously created Policy. Will fail if the policy is still being
-        # referenced by a network.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] policy
-        #   User given friendly name of the policy addressed by this request.
         # @param [String] client_operation_id
-        #   For mutating operation requests only. An optional identifier specified by the
-        #   client. Must be unique for operation resources in the Operations collection.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -711,14 +622,10 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Fetch the representation of an existing Policy.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] policy
-        #   User given friendly name of the policy addressed by this request.
         # @param [String] client_operation_id
-        #   For mutating operation requests only. An optional identifier specified by the
-        #   client. Must be unique for operation resources in the Operations collection.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -751,15 +658,10 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Enumerate all Policies associated with a project.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [Fixnum] max_results
-        #   Optional. Maximum number of results to be returned. If unspecified, the server
-        #   will decide how many results to return.
         # @param [String] page_token
-        #   Optional. A tag returned by a previous list request that was truncated. Use
-        #   this parameter to continue a previous list request.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -792,15 +694,11 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Apply a partial update to an existing Policy.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] policy
-        #   User given friendly name of the policy addressed by this request.
         # @param [Google::Apis::DnsV2beta1::Policy] policy_object
         # @param [String] client_operation_id
-        #   For mutating operation requests only. An optional identifier specified by the
-        #   client. Must be unique for operation resources in the Operations collection.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -835,15 +733,11 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Update an existing Policy.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] policy
-        #   User given friendly name of the policy addressed by this request.
         # @param [Google::Apis::DnsV2beta1::Policy] policy_object
         # @param [String] client_operation_id
-        #   For mutating operation requests only. An optional identifier specified by the
-        #   client. Must be unique for operation resources in the Operations collection.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -878,12 +772,9 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Fetch the representation of an existing Project.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] client_operation_id
-        #   For mutating operation requests only. An optional identifier specified by the
-        #   client. Must be unique for operation resources in the Operations collection.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user
@@ -915,24 +806,13 @@ module Google
           execute_or_queue_command(command, &block)
         end
         
-        # Enumerate ResourceRecordSets that have been created but not yet deleted.
+        # 
         # @param [String] project
-        #   Identifies the project addressed by this request.
         # @param [String] managed_zone
-        #   Identifies the managed zone addressed by this request. Can be the managed zone
-        #   name or id.
         # @param [Fixnum] max_results
-        #   Optional. Maximum number of results to be returned. If unspecified, the server
-        #   will decide how many results to return.
         # @param [String] name
-        #   Restricts the list to return only records with this fully qualified domain
-        #   name.
         # @param [String] page_token
-        #   Optional. A tag returned by a previous list request that was truncated. Use
-        #   this parameter to continue a previous list request.
         # @param [String] type
-        #   Restricts the list to return only records of this type. If present, the "name"
-        #   parameter must also be present.
         # @param [String] fields
         #   Selector specifying which fields to include in a partial response.
         # @param [String] quota_user

data/generated/google/apis/file_v1.rb

@@ -25,7 +25,7 @@ module Google
     # @see https://cloud.google.com/filestore/
     module FileV1
       VERSION = 'V1'
-      REVISION = '20200413'
+      REVISION = '20200520'
 
       # View and manage your data across Google Cloud Platform services
       AUTH_CLOUD_PLATFORM = 'https://www.googleapis.com/auth/cloud-platform'

data/generated/google/apis/file_v1/classes.rb

@@ -22,6 +22,94 @@ module Google
   module Apis
     module FileV1
       
+      # The allowed types for [VALUE] in a `[KEY]:[VALUE]` attribute.
+      class AttributeValue
+        include Google::Apis::Core::Hashable
+      
+        # A Boolean value represented by `true` or `false`.
+        # Corresponds to the JSON property `boolValue`
+        # @return [Boolean]
+        attr_accessor :bool_value
+        alias_method :bool_value?, :bool_value
+      
+        # A 64-bit signed integer.
+        # Corresponds to the JSON property `intValue`
+        # @return [Fixnum]
+        attr_accessor :int_value
+      
+        # Represents a string that might be shortened to a specified length.
+        # Corresponds to the JSON property `stringValue`
+        # @return [Google::Apis::FileV1::TruncatableString]
+        attr_accessor :string_value
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @bool_value = args[:bool_value] if args.key?(:bool_value)
+          @int_value = args[:int_value] if args.key?(:int_value)
+          @string_value = args[:string_value] if args.key?(:string_value)
+        end
+      end
+      
+      # A set of attributes, each in the format `[KEY]:[VALUE]`.
+      class Attributes
+        include Google::Apis::Core::Hashable
+      
+        # The set of attributes. Each attribute's key can be up to 128 bytes
+        # long. The value can be a string up to 256 bytes, a signed 64-bit integer,
+        # or the Boolean values `true` and `false`. For example:
+        # "/instance_id": "my-instance"
+        # "/http/user_agent": ""
+        # "/http/request_bytes": 300
+        # "abc.com/myattribute": true
+        # Corresponds to the JSON property `attributeMap`
+        # @return [Hash<String,Google::Apis::FileV1::AttributeValue>]
+        attr_accessor :attribute_map
+      
+        # The number of attributes that were discarded. Attributes can be discarded
+        # because their keys are too long or because there are too many attributes.
+        # If this value is 0 then all attributes are valid.
+        # Corresponds to the JSON property `droppedAttributesCount`
+        # @return [Fixnum]
+        attr_accessor :dropped_attributes_count
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @attribute_map = args[:attribute_map] if args.key?(:attribute_map)
+          @dropped_attributes_count = args[:dropped_attributes_count] if args.key?(:dropped_attributes_count)
+        end
+      end
+      
+      # Message for reporting billing requests through Eventstream.
+      class BillingView
+        include Google::Apis::Core::Hashable
+      
+        # Billing requests to be reported for an [Eventstream
+        # resource](http://google3/cloud/eventstream/v2/resource_event.proto).
+        # Each request contains billing operations to be reported under a service
+        # name. See go/billing-view-construction for documentation on constructing
+        # billing view report requests.
+        # Corresponds to the JSON property `reportRequests`
+        # @return [Array<Google::Apis::FileV1::ReportRequest>]
+        attr_accessor :report_requests
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @report_requests = args[:report_requests] if args.key?(:report_requests)
+        end
+      end
+      
       # The request message for Operations.CancelOperation.
       class CancelOperationRequest
         include Google::Apis::Core::Hashable
@@ -35,6 +123,97 @@ module Google
         end
       end
       
+      # Distribution represents a frequency distribution of double-valued sample
+      # points. It contains the size of the population of sample points plus
+      # additional optional information:
+      # - the arithmetic mean of the samples
+      # - the minimum and maximum of the samples
+      # - the sum-squared-deviation of the samples, used to compute variance
+      # - a histogram of the values of the sample points
+      class Distribution
+        include Google::Apis::Core::Hashable
+      
+        # The number of samples in each histogram bucket. `bucket_counts` are
+        # optional. If present, they must sum to the `count` value.
+        # The buckets are defined below in `bucket_option`. There are N buckets.
+        # `bucket_counts[0]` is the number of samples in the underflow bucket.
+        # `bucket_counts[1]` to `bucket_counts[N-1]` are the numbers of samples
+        # in each of the finite buckets. And `bucket_counts[N] is the number
+        # of samples in the overflow bucket. See the comments of `bucket_option`
+        # below for more details.
+        # Any suffix of trailing zeros may be omitted.
+        # Corresponds to the JSON property `bucketCounts`
+        # @return [Array<Fixnum>]
+        attr_accessor :bucket_counts
+      
+        # The total number of samples in the distribution. Must be >= 0.
+        # Corresponds to the JSON property `count`
+        # @return [Fixnum]
+        attr_accessor :count
+      
+        # Example points. Must be in increasing order of `value` field.
+        # Corresponds to the JSON property `exemplars`
+        # @return [Array<Google::Apis::FileV1::Exemplar>]
+        attr_accessor :exemplars
+      
+        # Describing buckets with arbitrary user-provided width.
+        # Corresponds to the JSON property `explicitBuckets`
+        # @return [Google::Apis::FileV1::ExplicitBuckets]
+        attr_accessor :explicit_buckets
+      
+        # Describing buckets with exponentially growing width.
+        # Corresponds to the JSON property `exponentialBuckets`
+        # @return [Google::Apis::FileV1::ExponentialBuckets]
+        attr_accessor :exponential_buckets
+      
+        # Describing buckets with constant width.
+        # Corresponds to the JSON property `linearBuckets`
+        # @return [Google::Apis::FileV1::LinearBuckets]
+        attr_accessor :linear_buckets
+      
+        # The maximum of the population of values. Ignored if `count` is zero.
+        # Corresponds to the JSON property `maximum`
+        # @return [Float]
+        attr_accessor :maximum
+      
+        # The arithmetic mean of the samples in the distribution. If `count` is
+        # zero then this field must be zero.
+        # Corresponds to the JSON property `mean`
+        # @return [Float]
+        attr_accessor :mean
+      
+        # The minimum of the population of values. Ignored if `count` is zero.
+        # Corresponds to the JSON property `minimum`
+        # @return [Float]
+        attr_accessor :minimum
+      
+        # The sum of squared deviations from the mean:
+        # Sum[i=1..count]((x_i - mean)^2)
+        # where each x_i is a sample values. If `count` is zero then this field
+        # must be zero, otherwise validation of the request fails.
+        # Corresponds to the JSON property `sumOfSquaredDeviation`
+        # @return [Float]
+        attr_accessor :sum_of_squared_deviation
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @bucket_counts = args[:bucket_counts] if args.key?(:bucket_counts)
+          @count = args[:count] if args.key?(:count)
+          @exemplars = args[:exemplars] if args.key?(:exemplars)
+          @explicit_buckets = args[:explicit_buckets] if args.key?(:explicit_buckets)
+          @exponential_buckets = args[:exponential_buckets] if args.key?(:exponential_buckets)
+          @linear_buckets = args[:linear_buckets] if args.key?(:linear_buckets)
+          @maximum = args[:maximum] if args.key?(:maximum)
+          @mean = args[:mean] if args.key?(:mean)
+          @minimum = args[:minimum] if args.key?(:minimum)
+          @sum_of_squared_deviation = args[:sum_of_squared_deviation] if args.key?(:sum_of_squared_deviation)
+        end
+      end
+      
       # A generic empty message that you can re-use to avoid defining duplicated
       # empty messages in your APIs. A typical example is to use it as the request
       # or the response type of an API method. For instance:
@@ -54,6 +233,118 @@ module Google
         end
       end
       
+      # Exemplars are example points that may be used to annotate aggregated
+      # distribution values. They are metadata that gives information about a
+      # particular value added to a Distribution bucket, such as a trace ID that
+      # was active when a value was added. They may contain further information,
+      # such as a example values and timestamps, origin, etc.
+      class Exemplar
+        include Google::Apis::Core::Hashable
+      
+        # Contextual information about the example value. Examples are:
+        # Trace: type.googleapis.com/google.monitoring.v3.SpanContext
+        # Literal string: type.googleapis.com/google.protobuf.StringValue
+        # Labels dropped during aggregation:
+        # type.googleapis.com/google.monitoring.v3.DroppedLabels
+        # There may be only a single attachment of any given message type in a
+        # single exemplar, and this is enforced by the system.
+        # Corresponds to the JSON property `attachments`
+        # @return [Array<Hash<String,Object>>]
+        attr_accessor :attachments
+      
+        # The observation (sampling) time of the above value.
+        # Corresponds to the JSON property `timestamp`
+        # @return [String]
+        attr_accessor :timestamp
+      
+        # Value of the exemplar point. This value determines to which bucket the
+        # exemplar belongs.
+        # Corresponds to the JSON property `value`
+        # @return [Float]
+        attr_accessor :value
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @attachments = args[:attachments] if args.key?(:attachments)
+          @timestamp = args[:timestamp] if args.key?(:timestamp)
+          @value = args[:value] if args.key?(:value)
+        end
+      end
+      
+      # Describing buckets with arbitrary user-provided width.
+      class ExplicitBuckets
+        include Google::Apis::Core::Hashable
+      
+        # 'bound' is a list of strictly increasing boundaries between
+        # buckets. Note that a list of length N-1 defines N buckets because
+        # of fenceposting. See comments on `bucket_options` for details.
+        # The i'th finite bucket covers the interval
+        # [bound[i-1], bound[i])
+        # where i ranges from 1 to bound_size() - 1. Note that there are no
+        # finite buckets at all if 'bound' only contains a single element; in
+        # that special case the single bound defines the boundary between the
+        # underflow and overflow buckets.
+        # bucket number                   lower bound    upper bound
+        # i == 0 (underflow)              -inf           bound[i]
+        # 0 < i < bound_size()            bound[i-1]     bound[i]
+        # i == bound_size() (overflow)    bound[i-1]     +inf
+        # Corresponds to the JSON property `bounds`
+        # @return [Array<Float>]
+        attr_accessor :bounds
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @bounds = args[:bounds] if args.key?(:bounds)
+        end
+      end
+      
+      # Describing buckets with exponentially growing width.
+      class ExponentialBuckets
+        include Google::Apis::Core::Hashable
+      
+        # The i'th exponential bucket covers the interval
+        # [scale * growth_factor^(i-1), scale * growth_factor^i)
+        # where i ranges from 1 to num_finite_buckets inclusive.
+        # Must be larger than 1.0.
+        # Corresponds to the JSON property `growthFactor`
+        # @return [Float]
+        attr_accessor :growth_factor
+      
+        # The number of finite buckets. With the underflow and overflow buckets,
+        # the total number of buckets is `num_finite_buckets` + 2.
+        # See comments on `bucket_options` for details.
+        # Corresponds to the JSON property `numFiniteBuckets`
+        # @return [Fixnum]
+        attr_accessor :num_finite_buckets
+      
+        # The i'th exponential bucket covers the interval
+        # [scale * growth_factor^(i-1), scale * growth_factor^i)
+        # where i ranges from 1 to num_finite_buckets inclusive.
+        # Must be > 0.
+        # Corresponds to the JSON property `scale`
+        # @return [Float]
+        attr_accessor :scale
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @growth_factor = args[:growth_factor] if args.key?(:growth_factor)
+          @num_finite_buckets = args[:num_finite_buckets] if args.key?(:num_finite_buckets)
+          @scale = args[:scale] if args.key?(:scale)
+        end
+      end
+      
       # File share configuration for the instance.
       class FileShareConfig
         include Google::Apis::Core::Hashable
@@ -80,6 +371,143 @@ module Google
         end
       end
       
+      # Represents information regarding an operation.
+      class GoogleApiServicecontrolV1Operation
+        include Google::Apis::Core::Hashable
+      
+        # Identity of the consumer who is using the service.
+        # This field should be filled in for the operations initiated by a
+        # consumer, but not for service-initiated operations that are
+        # not related to a specific consumer.
+        # - This can be in one of the following formats:
+        # - project:PROJECT_ID,
+        # - project`_`number:PROJECT_NUMBER,
+        # - projects/PROJECT_ID or PROJECT_NUMBER,
+        # - folders/FOLDER_NUMBER,
+        # - organizations/ORGANIZATION_NUMBER,
+        # - api`_`key:API_KEY.
+        # Corresponds to the JSON property `consumerId`
+        # @return [String]
+        attr_accessor :consumer_id
+      
+        # End time of the operation.
+        # Required when the operation is used in ServiceController.Report,
+        # but optional when the operation is used in ServiceController.Check.
+        # Corresponds to the JSON property `endTime`
+        # @return [String]
+        attr_accessor :end_time
+      
+        # DO NOT USE. This is an experimental field.
+        # Corresponds to the JSON property `importance`
+        # @return [String]
+        attr_accessor :importance
+      
+        # Labels describing the operation. Only the following labels are allowed:
+        # - Labels describing monitored resources as defined in
+        # the service configuration.
+        # - Default labels of metric values. When specified, labels defined in the
+        # metric value override these default.
+        # - The following labels defined by Google Cloud Platform:
+        # - `cloud.googleapis.com/location` describing the location where the
+        # operation happened,
+        # - `servicecontrol.googleapis.com/user_agent` describing the user agent
+        # of the API request,
+        # - `servicecontrol.googleapis.com/service_agent` describing the service
+        # used to handle the API request (e.g. ESP),
+        # - `servicecontrol.googleapis.com/platform` describing the platform
+        # where the API is served, such as App Engine, Compute Engine, or
+        # Kubernetes Engine.
+        # Corresponds to the JSON property `labels`
+        # @return [Hash<String,String>]
+        attr_accessor :labels
+      
+        # Represents information to be logged.
+        # Corresponds to the JSON property `logEntries`
+        # @return [Array<Google::Apis::FileV1::LogEntry>]
+        attr_accessor :log_entries
+      
+        # Represents information about this operation. Each MetricValueSet
+        # corresponds to a metric defined in the service configuration.
+        # The data type used in the MetricValueSet must agree with
+        # the data type specified in the metric definition.
+        # Within a single operation, it is not allowed to have more than one
+        # MetricValue instances that have the same metric names and identical
+        # label value combinations. If a request has such duplicated MetricValue
+        # instances, the entire request is rejected with
+        # an invalid argument error.
+        # Corresponds to the JSON property `metricValueSets`
+        # @return [Array<Google::Apis::FileV1::MetricValueSet>]
+        attr_accessor :metric_value_sets
+      
+        # Identity of the operation. This must be unique within the scope of the
+        # service that generated the operation. If the service calls
+        # Check() and Report() on the same operation, the two calls should carry
+        # the same id.
+        # UUID version 4 is recommended, though not required.
+        # In scenarios where an operation is computed from existing information
+        # and an idempotent id is desirable for deduplication purpose, UUID version 5
+        # is recommended. See RFC 4122 for details.
+        # Corresponds to the JSON property `operationId`
+        # @return [String]
+        attr_accessor :operation_id
+      
+        # Fully qualified name of the operation. Reserved for future use.
+        # Corresponds to the JSON property `operationName`
+        # @return [String]
+        attr_accessor :operation_name
+      
+        # Represents the properties needed for quota operations.
+        # Corresponds to the JSON property `quotaProperties`
+        # @return [Google::Apis::FileV1::QuotaProperties]
+        attr_accessor :quota_properties
+      
+        # The resources that are involved in the operation.
+        # The maximum supported number of entries in this field is 100.
+        # Corresponds to the JSON property `resources`
+        # @return [Array<Google::Apis::FileV1::ResourceInfo>]
+        attr_accessor :resources
+      
+        # Required. Start time of the operation.
+        # Corresponds to the JSON property `startTime`
+        # @return [String]
+        attr_accessor :start_time
+      
+        # Unimplemented. A list of Cloud Trace spans. The span names shall contain
+        # the id of the destination project which can be either the produce or the
+        # consumer project.
+        # Corresponds to the JSON property `traceSpans`
+        # @return [Array<Google::Apis::FileV1::TraceSpan>]
+        attr_accessor :trace_spans
+      
+        # User defined labels for the resource that this operation is associated
+        # with. Only a combination of 1000 user labels per consumer project are
+        # allowed.
+        # Corresponds to the JSON property `userLabels`
+        # @return [Hash<String,String>]
+        attr_accessor :user_labels
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @consumer_id = args[:consumer_id] if args.key?(:consumer_id)
+          @end_time = args[:end_time] if args.key?(:end_time)
+          @importance = args[:importance] if args.key?(:importance)
+          @labels = args[:labels] if args.key?(:labels)
+          @log_entries = args[:log_entries] if args.key?(:log_entries)
+          @metric_value_sets = args[:metric_value_sets] if args.key?(:metric_value_sets)
+          @operation_id = args[:operation_id] if args.key?(:operation_id)
+          @operation_name = args[:operation_name] if args.key?(:operation_name)
+          @quota_properties = args[:quota_properties] if args.key?(:quota_properties)
+          @resources = args[:resources] if args.key?(:resources)
+          @start_time = args[:start_time] if args.key?(:start_time)
+          @trace_spans = args[:trace_spans] if args.key?(:trace_spans)
+          @user_labels = args[:user_labels] if args.key?(:user_labels)
+        end
+      end
+      
       # 
       class GoogleCloudSaasacceleratorManagementProvidersV1Instance
         include Google::Apis::Core::Hashable
@@ -120,6 +548,12 @@ module Google
         # @return [Hash<String,Google::Apis::FileV1::GoogleCloudSaasacceleratorManagementProvidersV1MaintenanceSchedule>]
         attr_accessor :maintenance_schedules
       
+        # Maintenance settings associated with instance. Allows service producers and
+        # end users to assign settings that controls maintenance on this instance.
+        # Corresponds to the JSON property `maintenanceSettings`
+        # @return [Google::Apis::FileV1::GoogleCloudSaasacceleratorManagementProvidersV1MaintenanceSettings]
+        attr_accessor :maintenance_settings
+      
         # Unique name of the resource. It uses the form:
         # `projects/`project_id`/locations/`location_id`/instances/`instance_id``
         # Corresponds to the JSON property `name`
@@ -187,6 +621,7 @@ module Google
           @labels = args[:labels] if args.key?(:labels)
           @maintenance_policy_names = args[:maintenance_policy_names] if args.key?(:maintenance_policy_names)
           @maintenance_schedules = args[:maintenance_schedules] if args.key?(:maintenance_schedules)
+          @maintenance_settings = args[:maintenance_settings] if args.key?(:maintenance_settings)
           @name = args[:name] if args.key?(:name)
           @producer_metadata = args[:producer_metadata] if args.key?(:producer_metadata)
           @provisioned_resources = args[:provisioned_resources] if args.key?(:provisioned_resources)
@@ -242,6 +677,30 @@ module Google
         end
       end
       
+      # Maintenance settings associated with instance. Allows service producers and
+      # end users to assign settings that controls maintenance on this instance.
+      class GoogleCloudSaasacceleratorManagementProvidersV1MaintenanceSettings
+        include Google::Apis::Core::Hashable
+      
+        # Optional. Exclude instance from maintenance. When true, rollout service will
+        # not
+        # attempt maintenance on the instance. Rollout service will include the
+        # instance in reported rollout progress as not attempted.
+        # Corresponds to the JSON property `exclude`
+        # @return [Boolean]
+        attr_accessor :exclude
+        alias_method :exclude?, :exclude
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @exclude = args[:exclude] if args.key?(:exclude)
+        end
+      end
+      
       # Node information for custom per-node SLO implementations.
       # SSA does not support per-node SLO, but producers can populate per-node
       # information in SloMetadata for custom precomputations.
@@ -446,6 +905,130 @@ module Google
         end
       end
       
+      # A common proto for logging HTTP requests. Only contains semantics
+      # defined by the HTTP specification. Product-specific logging
+      # information MUST be defined in a separate message.
+      class HttpRequest
+        include Google::Apis::Core::Hashable
+      
+        # The number of HTTP response bytes inserted into cache. Set only when a
+        # cache fill was attempted.
+        # Corresponds to the JSON property `cacheFillBytes`
+        # @return [Fixnum]
+        attr_accessor :cache_fill_bytes
+      
+        # Whether or not an entity was served from cache
+        # (with or without validation).
+        # Corresponds to the JSON property `cacheHit`
+        # @return [Boolean]
+        attr_accessor :cache_hit
+        alias_method :cache_hit?, :cache_hit
+      
+        # Whether or not a cache lookup was attempted.
+        # Corresponds to the JSON property `cacheLookup`
+        # @return [Boolean]
+        attr_accessor :cache_lookup
+        alias_method :cache_lookup?, :cache_lookup
+      
+        # Whether or not the response was validated with the origin server before
+        # being served from cache. This field is only meaningful if `cache_hit` is
+        # True.
+        # Corresponds to the JSON property `cacheValidatedWithOriginServer`
+        # @return [Boolean]
+        attr_accessor :cache_validated_with_origin_server
+        alias_method :cache_validated_with_origin_server?, :cache_validated_with_origin_server
+      
+        # The request processing latency on the server, from the time the request was
+        # received until the response was sent.
+        # Corresponds to the JSON property `latency`
+        # @return [String]
+        attr_accessor :latency
+      
+        # Protocol used for the request. Examples: "HTTP/1.1", "HTTP/2", "websocket"
+        # Corresponds to the JSON property `protocol`
+        # @return [String]
+        attr_accessor :protocol
+      
+        # The referer URL of the request, as defined in
+        # [HTTP/1.1 Header Field
+        # Definitions](http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html).
+        # Corresponds to the JSON property `referer`
+        # @return [String]
+        attr_accessor :referer
+      
+        # The IP address (IPv4 or IPv6) of the client that issued the HTTP
+        # request. Examples: `"192.168.1.1"`, `"FE80::0202:B3FF:FE1E:8329"`.
+        # Corresponds to the JSON property `remoteIp`
+        # @return [String]
+        attr_accessor :remote_ip
+      
+        # The request method. Examples: `"GET"`, `"HEAD"`, `"PUT"`, `"POST"`.
+        # Corresponds to the JSON property `requestMethod`
+        # @return [String]
+        attr_accessor :request_method
+      
+        # The size of the HTTP request message in bytes, including the request
+        # headers and the request body.
+        # Corresponds to the JSON property `requestSize`
+        # @return [Fixnum]
+        attr_accessor :request_size
+      
+        # The scheme (http, https), the host name, the path, and the query
+        # portion of the URL that was requested.
+        # Example: `"http://example.com/some/info?color=red"`.
+        # Corresponds to the JSON property `requestUrl`
+        # @return [String]
+        attr_accessor :request_url
+      
+        # The size of the HTTP response message sent back to the client, in bytes,
+        # including the response headers and the response body.
+        # Corresponds to the JSON property `responseSize`
+        # @return [Fixnum]
+        attr_accessor :response_size
+      
+        # The IP address (IPv4 or IPv6) of the origin server that the request was
+        # sent to.
+        # Corresponds to the JSON property `serverIp`
+        # @return [String]
+        attr_accessor :server_ip
+      
+        # The response code indicating the status of the response.
+        # Examples: 200, 404.
+        # Corresponds to the JSON property `status`
+        # @return [Fixnum]
+        attr_accessor :status
+      
+        # The user agent sent by the client. Example:
+        # `"Mozilla/4.0 (compatible; MSIE 6.0; Windows 98; Q312461; .NET
+        # CLR 1.0.3705)"`.
+        # Corresponds to the JSON property `userAgent`
+        # @return [String]
+        attr_accessor :user_agent
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @cache_fill_bytes = args[:cache_fill_bytes] if args.key?(:cache_fill_bytes)
+          @cache_hit = args[:cache_hit] if args.key?(:cache_hit)
+          @cache_lookup = args[:cache_lookup] if args.key?(:cache_lookup)
+          @cache_validated_with_origin_server = args[:cache_validated_with_origin_server] if args.key?(:cache_validated_with_origin_server)
+          @latency = args[:latency] if args.key?(:latency)
+          @protocol = args[:protocol] if args.key?(:protocol)
+          @referer = args[:referer] if args.key?(:referer)
+          @remote_ip = args[:remote_ip] if args.key?(:remote_ip)
+          @request_method = args[:request_method] if args.key?(:request_method)
+          @request_size = args[:request_size] if args.key?(:request_size)
+          @request_url = args[:request_url] if args.key?(:request_url)
+          @response_size = args[:response_size] if args.key?(:response_size)
+          @server_ip = args[:server_ip] if args.key?(:server_ip)
+          @status = args[:status] if args.key?(:status)
+          @user_agent = args[:user_agent] if args.key?(:user_agent)
+        end
+      end
+      
       # A Cloud Filestore instance.
       class Instance
         include Google::Apis::Core::Hashable
@@ -523,6 +1106,44 @@ module Google
         end
       end
       
+      # Describing buckets with constant width.
+      class LinearBuckets
+        include Google::Apis::Core::Hashable
+      
+        # The number of finite buckets. With the underflow and overflow buckets,
+        # the total number of buckets is `num_finite_buckets` + 2.
+        # See comments on `bucket_options` for details.
+        # Corresponds to the JSON property `numFiniteBuckets`
+        # @return [Fixnum]
+        attr_accessor :num_finite_buckets
+      
+        # The i'th linear bucket covers the interval
+        # [offset + (i-1) * width, offset + i * width)
+        # where i ranges from 1 to num_finite_buckets, inclusive.
+        # Corresponds to the JSON property `offset`
+        # @return [Float]
+        attr_accessor :offset
+      
+        # The i'th linear bucket covers the interval
+        # [offset + (i-1) * width, offset + i * width)
+        # where i ranges from 1 to num_finite_buckets, inclusive.
+        # Must be strictly positive.
+        # Corresponds to the JSON property `width`
+        # @return [Float]
+        attr_accessor :width
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @num_finite_buckets = args[:num_finite_buckets] if args.key?(:num_finite_buckets)
+          @offset = args[:offset] if args.key?(:offset)
+          @width = args[:width] if args.key?(:width)
+        end
+      end
+      
       # ListInstancesResponse is the result of ListInstancesRequest.
       class ListInstancesResponse
         include Google::Apis::Core::Hashable
@@ -656,6 +1277,333 @@ module Google
         end
       end
       
+      # An individual log entry.
+      class LogEntry
+        include Google::Apis::Core::Hashable
+      
+        # A common proto for logging HTTP requests. Only contains semantics
+        # defined by the HTTP specification. Product-specific logging
+        # information MUST be defined in a separate message.
+        # Corresponds to the JSON property `httpRequest`
+        # @return [Google::Apis::FileV1::HttpRequest]
+        attr_accessor :http_request
+      
+        # A unique ID for the log entry used for deduplication. If omitted,
+        # the implementation will generate one based on operation_id.
+        # Corresponds to the JSON property `insertId`
+        # @return [String]
+        attr_accessor :insert_id
+      
+        # A set of user-defined (key, value) data that provides additional
+        # information about the log entry.
+        # Corresponds to the JSON property `labels`
+        # @return [Hash<String,String>]
+        attr_accessor :labels
+      
+        # Required. The log to which this log entry belongs. Examples: `"syslog"`,
+        # `"book_log"`.
+        # Corresponds to the JSON property `name`
+        # @return [String]
+        attr_accessor :name
+      
+        # Additional information about a potentially long-running operation with which
+        # a log entry is associated.
+        # Corresponds to the JSON property `operation`
+        # @return [Google::Apis::FileV1::LogEntryOperation]
+        attr_accessor :operation
+      
+        # The log entry payload, represented as a protocol buffer that is
+        # expressed as a JSON object. The only accepted type currently is
+        # AuditLog.
+        # Corresponds to the JSON property `protoPayload`
+        # @return [Hash<String,Object>]
+        attr_accessor :proto_payload
+      
+        # The severity of the log entry. The default value is
+        # `LogSeverity.DEFAULT`.
+        # Corresponds to the JSON property `severity`
+        # @return [String]
+        attr_accessor :severity
+      
+        # Additional information about the source code location that produced the log
+        # entry.
+        # Corresponds to the JSON property `sourceLocation`
+        # @return [Google::Apis::FileV1::LogEntrySourceLocation]
+        attr_accessor :source_location
+      
+        # The log entry payload, represented as a structure that
+        # is expressed as a JSON object.
+        # Corresponds to the JSON property `structPayload`
+        # @return [Hash<String,Object>]
+        attr_accessor :struct_payload
+      
+        # The log entry payload, represented as a Unicode string (UTF-8).
+        # Corresponds to the JSON property `textPayload`
+        # @return [String]
+        attr_accessor :text_payload
+      
+        # The time the event described by the log entry occurred. If
+        # omitted, defaults to operation start time.
+        # Corresponds to the JSON property `timestamp`
+        # @return [String]
+        attr_accessor :timestamp
+      
+        # Optional. Resource name of the trace associated with the log entry, if any.
+        # If this field contains a relative resource name, you can assume the name is
+        # relative to `//tracing.googleapis.com`. Example:
+        # `projects/my-projectid/traces/06796866738c859f2f19b7cfb3214824`
+        # Corresponds to the JSON property `trace`
+        # @return [String]
+        attr_accessor :trace
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @http_request = args[:http_request] if args.key?(:http_request)
+          @insert_id = args[:insert_id] if args.key?(:insert_id)
+          @labels = args[:labels] if args.key?(:labels)
+          @name = args[:name] if args.key?(:name)
+          @operation = args[:operation] if args.key?(:operation)
+          @proto_payload = args[:proto_payload] if args.key?(:proto_payload)
+          @severity = args[:severity] if args.key?(:severity)
+          @source_location = args[:source_location] if args.key?(:source_location)
+          @struct_payload = args[:struct_payload] if args.key?(:struct_payload)
+          @text_payload = args[:text_payload] if args.key?(:text_payload)
+          @timestamp = args[:timestamp] if args.key?(:timestamp)
+          @trace = args[:trace] if args.key?(:trace)
+        end
+      end
+      
+      # Additional information about a potentially long-running operation with which
+      # a log entry is associated.
+      class LogEntryOperation
+        include Google::Apis::Core::Hashable
+      
+        # Optional. Set this to True if this is the first log entry in the operation.
+        # Corresponds to the JSON property `first`
+        # @return [Boolean]
+        attr_accessor :first
+        alias_method :first?, :first
+      
+        # Optional. An arbitrary operation identifier. Log entries with the
+        # same identifier are assumed to be part of the same operation.
+        # Corresponds to the JSON property `id`
+        # @return [String]
+        attr_accessor :id
+      
+        # Optional. Set this to True if this is the last log entry in the operation.
+        # Corresponds to the JSON property `last`
+        # @return [Boolean]
+        attr_accessor :last
+        alias_method :last?, :last
+      
+        # Optional. An arbitrary producer identifier. The combination of
+        # `id` and `producer` must be globally unique.  Examples for `producer`:
+        # `"MyDivision.MyBigCompany.com"`, `"github.com/MyProject/MyApplication"`.
+        # Corresponds to the JSON property `producer`
+        # @return [String]
+        attr_accessor :producer
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @first = args[:first] if args.key?(:first)
+          @id = args[:id] if args.key?(:id)
+          @last = args[:last] if args.key?(:last)
+          @producer = args[:producer] if args.key?(:producer)
+        end
+      end
+      
+      # Additional information about the source code location that produced the log
+      # entry.
+      class LogEntrySourceLocation
+        include Google::Apis::Core::Hashable
+      
+        # Optional. Source file name. Depending on the runtime environment, this
+        # might be a simple name or a fully-qualified name.
+        # Corresponds to the JSON property `file`
+        # @return [String]
+        attr_accessor :file
+      
+        # Optional. Human-readable name of the function or method being invoked, with
+        # optional context such as the class or package name. This information may be
+        # used in contexts such as the logs viewer, where a file and line number are
+        # less meaningful. The format can vary by language. For example:
+        # `qual.if.ied.Class.method` (Java), `dir/package.func` (Go), `function`
+        # (Python).
+        # Corresponds to the JSON property `function`
+        # @return [String]
+        attr_accessor :function
+      
+        # Optional. Line within the source file. 1-based; 0 indicates no line number
+        # available.
+        # Corresponds to the JSON property `line`
+        # @return [Fixnum]
+        attr_accessor :line
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @file = args[:file] if args.key?(:file)
+          @function = args[:function] if args.key?(:function)
+          @line = args[:line] if args.key?(:line)
+        end
+      end
+      
+      # Represents a single metric value.
+      class MetricValue
+        include Google::Apis::Core::Hashable
+      
+        # A boolean value.
+        # Corresponds to the JSON property `boolValue`
+        # @return [Boolean]
+        attr_accessor :bool_value
+        alias_method :bool_value?, :bool_value
+      
+        # Distribution represents a frequency distribution of double-valued sample
+        # points. It contains the size of the population of sample points plus
+        # additional optional information:
+        # - the arithmetic mean of the samples
+        # - the minimum and maximum of the samples
+        # - the sum-squared-deviation of the samples, used to compute variance
+        # - a histogram of the values of the sample points
+        # Corresponds to the JSON property `distributionValue`
+        # @return [Google::Apis::FileV1::Distribution]
+        attr_accessor :distribution_value
+      
+        # A double precision floating point value.
+        # Corresponds to the JSON property `doubleValue`
+        # @return [Float]
+        attr_accessor :double_value
+      
+        # The end of the time period over which this metric value's measurement
+        # applies.
+        # Corresponds to the JSON property `endTime`
+        # @return [String]
+        attr_accessor :end_time
+      
+        # A signed 64-bit integer value.
+        # Corresponds to the JSON property `int64Value`
+        # @return [Fixnum]
+        attr_accessor :int64_value
+      
+        # The labels describing the metric value.
+        # See comments on google.api.servicecontrol.v1.Operation.labels for
+        # the overriding relationship.
+        # Note that this map must not contain monitored resource labels.
+        # Corresponds to the JSON property `labels`
+        # @return [Hash<String,String>]
+        attr_accessor :labels
+      
+        # Represents an amount of money with its currency type.
+        # Corresponds to the JSON property `moneyValue`
+        # @return [Google::Apis::FileV1::Money]
+        attr_accessor :money_value
+      
+        # The start of the time period over which this metric value's measurement
+        # applies. The time period has different semantics for different metric
+        # types (cumulative, delta, and gauge). See the metric definition
+        # documentation in the service configuration for details.
+        # Corresponds to the JSON property `startTime`
+        # @return [String]
+        attr_accessor :start_time
+      
+        # A text string value.
+        # Corresponds to the JSON property `stringValue`
+        # @return [String]
+        attr_accessor :string_value
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @bool_value = args[:bool_value] if args.key?(:bool_value)
+          @distribution_value = args[:distribution_value] if args.key?(:distribution_value)
+          @double_value = args[:double_value] if args.key?(:double_value)
+          @end_time = args[:end_time] if args.key?(:end_time)
+          @int64_value = args[:int64_value] if args.key?(:int64_value)
+          @labels = args[:labels] if args.key?(:labels)
+          @money_value = args[:money_value] if args.key?(:money_value)
+          @start_time = args[:start_time] if args.key?(:start_time)
+          @string_value = args[:string_value] if args.key?(:string_value)
+        end
+      end
+      
+      # Represents a set of metric values in the same metric.
+      # Each metric value in the set should have a unique combination of start time,
+      # end time, and label values.
+      class MetricValueSet
+        include Google::Apis::Core::Hashable
+      
+        # The metric name defined in the service configuration.
+        # Corresponds to the JSON property `metricName`
+        # @return [String]
+        attr_accessor :metric_name
+      
+        # The values in this metric.
+        # Corresponds to the JSON property `metricValues`
+        # @return [Array<Google::Apis::FileV1::MetricValue>]
+        attr_accessor :metric_values
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @metric_name = args[:metric_name] if args.key?(:metric_name)
+          @metric_values = args[:metric_values] if args.key?(:metric_values)
+        end
+      end
+      
+      # Represents an amount of money with its currency type.
+      class Money
+        include Google::Apis::Core::Hashable
+      
+        # The 3-letter currency code defined in ISO 4217.
+        # Corresponds to the JSON property `currencyCode`
+        # @return [String]
+        attr_accessor :currency_code
+      
+        # Number of nano (10^-9) units of the amount.
+        # The value must be between -999,999,999 and +999,999,999 inclusive.
+        # If `units` is positive, `nanos` must be positive or zero.
+        # If `units` is zero, `nanos` can be positive, zero, or negative.
+        # If `units` is negative, `nanos` must be negative or zero.
+        # For example $-1.75 is represented as `units`=-1 and `nanos`=-750,000,000.
+        # Corresponds to the JSON property `nanos`
+        # @return [Fixnum]
+        attr_accessor :nanos
+      
+        # The whole units of the amount.
+        # For example if `currencyCode` is `"USD"`, then 1 unit is one US dollar.
+        # Corresponds to the JSON property `units`
+        # @return [Fixnum]
+        attr_accessor :units
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @currency_code = args[:currency_code] if args.key?(:currency_code)
+          @nanos = args[:nanos] if args.key?(:nanos)
+          @units = args[:units] if args.key?(:units)
+        end
+      end
+      
       # Network configuration for the instance.
       class NetworkConfig
         include Google::Apis::Core::Hashable
@@ -828,6 +1776,108 @@ module Google
         end
       end
       
+      # Represents the properties needed for quota operations.
+      class QuotaProperties
+        include Google::Apis::Core::Hashable
+      
+        # Quota mode for this operation.
+        # Corresponds to the JSON property `quotaMode`
+        # @return [String]
+        attr_accessor :quota_mode
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @quota_mode = args[:quota_mode] if args.key?(:quota_mode)
+        end
+      end
+      
+      # Request message for the Report method.
+      class ReportRequest
+        include Google::Apis::Core::Hashable
+      
+        # Operations to be reported.
+        # Typically the service should report one operation per request.
+        # Putting multiple operations into a single request is allowed, but should
+        # be used only when multiple operations are natually available at the time
+        # of the report.
+        # There is no limit on the number of operations in the same ReportRequest,
+        # however the ReportRequest size should be no larger than 1MB. See
+        # ReportResponse.report_errors for partial failure behavior.
+        # Corresponds to the JSON property `operations`
+        # @return [Array<Google::Apis::FileV1::GoogleApiServicecontrolV1Operation>]
+        attr_accessor :operations
+      
+        # Specifies which version of service config should be used to process the
+        # request.
+        # If unspecified or no matching version can be found, the
+        # latest one will be used.
+        # Corresponds to the JSON property `serviceConfigId`
+        # @return [String]
+        attr_accessor :service_config_id
+      
+        # The service name as specified in its service configuration. For example,
+        # `"pubsub.googleapis.com"`.
+        # See
+        # [google.api.Service](https://cloud.google.com/service-management/reference/rpc/
+        # google.api#google.api.Service)
+        # for the definition of a service name.
+        # Corresponds to the JSON property `serviceName`
+        # @return [String]
+        attr_accessor :service_name
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @operations = args[:operations] if args.key?(:operations)
+          @service_config_id = args[:service_config_id] if args.key?(:service_config_id)
+          @service_name = args[:service_name] if args.key?(:service_name)
+        end
+      end
+      
+      # Describes a resource associated with this operation.
+      class ResourceInfo
+        include Google::Apis::Core::Hashable
+      
+        # The identifier of the parent of this resource instance.
+        # Must be in one of the following formats:
+        # - “projects/<project-id or project-number>”
+        # - “folders/<folder-id>”
+        # - “organizations/<organization-id>”
+        # Corresponds to the JSON property `resourceContainer`
+        # @return [String]
+        attr_accessor :resource_container
+      
+        # The location of the resource. If not empty, the resource will be checked
+        # against location policy. The value must be a valid zone, region or
+        # multiregion. For example: "europe-west4" or "northamerica-northeast1-a"
+        # Corresponds to the JSON property `resourceLocation`
+        # @return [String]
+        attr_accessor :resource_location
+      
+        # Name of the resource. This is used for auditing purposes.
+        # Corresponds to the JSON property `resourceName`
+        # @return [String]
+        attr_accessor :resource_name
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @resource_container = args[:resource_container] if args.key?(:resource_container)
+          @resource_location = args[:resource_location] if args.key?(:resource_location)
+          @resource_name = args[:resource_name] if args.key?(:resource_name)
+        end
+      end
+      
       # The `Status` type defines a logical error model that is suitable for
       # different programming environments, including REST APIs and RPC APIs. It is
       # used by [gRPC](https://github.com/grpc). Each `Status` message contains
@@ -866,6 +1916,143 @@ module Google
           @message = args[:message] if args.key?(:message)
         end
       end
+      
+      # A span represents a single operation within a trace. Spans can be
+      # nested to form a trace tree. Often, a trace contains a root span
+      # that describes the end-to-end latency, and one or more subspans for
+      # its sub-operations. A trace can also contain multiple root spans,
+      # or none at all. Spans do not need to be contiguous&mdash;there may be
+      # gaps or overlaps between spans in a trace.
+      class TraceSpan
+        include Google::Apis::Core::Hashable
+      
+        # A set of attributes, each in the format `[KEY]:[VALUE]`.
+        # Corresponds to the JSON property `attributes`
+        # @return [Google::Apis::FileV1::Attributes]
+        attr_accessor :attributes
+      
+        # An optional number of child spans that were generated while this span
+        # was active. If set, allows implementation to detect missing child spans.
+        # Corresponds to the JSON property `childSpanCount`
+        # @return [Fixnum]
+        attr_accessor :child_span_count
+      
+        # Represents a string that might be shortened to a specified length.
+        # Corresponds to the JSON property `displayName`
+        # @return [Google::Apis::FileV1::TruncatableString]
+        attr_accessor :display_name
+      
+        # The end time of the span. On the client side, this is the time kept by
+        # the local machine where the span execution ends. On the server side, this
+        # is the time when the server application handler stops running.
+        # Corresponds to the JSON property `endTime`
+        # @return [String]
+        attr_accessor :end_time
+      
+        # The resource name of the span in the following format:
+        # projects/[PROJECT_ID]/traces/[TRACE_ID]/spans/SPAN_ID is a unique
+        # identifier for a trace within a project;
+        # it is a 32-character hexadecimal encoding of a 16-byte array.
+        # [SPAN_ID] is a unique identifier for a span within a trace; it
+        # is a 16-character hexadecimal encoding of an 8-byte array.
+        # Corresponds to the JSON property `name`
+        # @return [String]
+        attr_accessor :name
+      
+        # The [SPAN_ID] of this span's parent span. If this is a root span,
+        # then this field must be empty.
+        # Corresponds to the JSON property `parentSpanId`
+        # @return [String]
+        attr_accessor :parent_span_id
+      
+        # (Optional) Set this parameter to indicate whether this span is in
+        # the same process as its parent. If you do not set this parameter,
+        # Stackdriver Trace is unable to take advantage of this helpful
+        # information.
+        # Corresponds to the JSON property `sameProcessAsParentSpan`
+        # @return [Boolean]
+        attr_accessor :same_process_as_parent_span
+        alias_method :same_process_as_parent_span?, :same_process_as_parent_span
+      
+        # The [SPAN_ID] portion of the span's resource name.
+        # Corresponds to the JSON property `spanId`
+        # @return [String]
+        attr_accessor :span_id
+      
+        # Distinguishes between spans generated in a particular context. For example,
+        # two spans with the same name may be distinguished using `CLIENT` (caller)
+        # and `SERVER` (callee) to identify an RPC call.
+        # Corresponds to the JSON property `spanKind`
+        # @return [String]
+        attr_accessor :span_kind
+      
+        # The start time of the span. On the client side, this is the time kept by
+        # the local machine where the span execution starts. On the server side, this
+        # is the time when the server's application handler starts running.
+        # Corresponds to the JSON property `startTime`
+        # @return [String]
+        attr_accessor :start_time
+      
+        # The `Status` type defines a logical error model that is suitable for
+        # different programming environments, including REST APIs and RPC APIs. It is
+        # used by [gRPC](https://github.com/grpc). Each `Status` message contains
+        # three pieces of data: error code, error message, and error details.
+        # You can find out more about this error model and how to work with it in the
+        # [API Design Guide](https://cloud.google.com/apis/design/errors).
+        # Corresponds to the JSON property `status`
+        # @return [Google::Apis::FileV1::Status]
+        attr_accessor :status
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @attributes = args[:attributes] if args.key?(:attributes)
+          @child_span_count = args[:child_span_count] if args.key?(:child_span_count)
+          @display_name = args[:display_name] if args.key?(:display_name)
+          @end_time = args[:end_time] if args.key?(:end_time)
+          @name = args[:name] if args.key?(:name)
+          @parent_span_id = args[:parent_span_id] if args.key?(:parent_span_id)
+          @same_process_as_parent_span = args[:same_process_as_parent_span] if args.key?(:same_process_as_parent_span)
+          @span_id = args[:span_id] if args.key?(:span_id)
+          @span_kind = args[:span_kind] if args.key?(:span_kind)
+          @start_time = args[:start_time] if args.key?(:start_time)
+          @status = args[:status] if args.key?(:status)
+        end
+      end
+      
+      # Represents a string that might be shortened to a specified length.
+      class TruncatableString
+        include Google::Apis::Core::Hashable
+      
+        # The number of bytes removed from the original string. If this
+        # value is 0, then the string was not shortened.
+        # Corresponds to the JSON property `truncatedByteCount`
+        # @return [Fixnum]
+        attr_accessor :truncated_byte_count
+      
+        # The shortened string. For example, if the original string is 500
+        # bytes long and the limit of the string is 128 bytes, then
+        # `value` contains the first 128 bytes of the 500-byte string.
+        # Truncation always happens on a UTF8 character boundary. If there
+        # are multi-byte characters in the string, then the length of the
+        # shortened string might be less than the size limit.
+        # Corresponds to the JSON property `value`
+        # @return [String]
+        attr_accessor :value
+      
+        def initialize(**args)
+           update!(**args)
+        end
+      
+        # Update properties of this object
+        def update!(**args)
+          @truncated_byte_count = args[:truncated_byte_count] if args.key?(:truncated_byte_count)
+          @value = args[:value] if args.key?(:value)
+        end
+      end
     end
   end
 end