google-adwords-api 0.21.1 → 0.22.0

data/examples/v201603/migration/upgrade_ad_url.rb

@@ -1,93 +0,0 @@
-#!/usr/bin/env ruby
-# Encoding: utf-8
-#
-# Copyright:: Copyright 2015, Google Inc. All Rights Reserved.
-#
-# License:: Licensed under the Apache License, Version 2.0 (the "License");
-#           you may not use this file except in compliance with the License.
-#           You may obtain a copy of the License at
-#
-#           http://www.apache.org/licenses/LICENSE-2.0
-#
-#           Unless required by applicable law or agreed to in writing, software
-#           distributed under the License is distributed on an "AS IS" BASIS,
-#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-#           implied.
-#           See the License for the specific language governing permissions and
-#           limitations under the License.
-#
-# This code example upgrades an ad to use upgraded URLs.
-
-require 'adwords_api'
-
-def upgrade_ad_url(ad_group_id, ad_id)
-  # AdwordsApi::Api will read a config file from ENV['HOME']/adwords_api.yml
-  # when called without parameters.
-  adwords = AdwordsApi::Api.new
-
-  # To enable logging of SOAP requests, set the log_level value to 'DEBUG' in
-  # the configuration file or provide your own logger:
-  # adwords.logger = Logger.new('adwords_xml.log')
-
-  ad_group_ad_srv = adwords.service(:AdGroupAdService, API_VERSION)
-
-  selector = {
-    :fields => ['Id', 'Url'],
-    :predicates => [
-      {:field => 'AdGroupId', :operator => 'EQUALS', :values => [ad_group_id]},
-      {:field => 'Id', :operator => 'EQUALS', :values => [ad_id]}
-    ]
-  }
-
-  page = ad_group_ad_srv.get(selector)
-  ad_group_ad = page[:entries][0] if page[:entries]
-
-  raise StandardError, "Ad not found." if ad_group_ad.nil?
-
-  ad_url_upgrade = {
-    :ad_id => ad_group_ad[:ad][:id],
-    :final_url => ad_group_ad[:ad][:url]
-  }
-
-  response = ad_group_ad_srv.upgrade_url([ad_url_upgrade])
-  if response
-    ad_group_ad = response.first
-    puts "Ad with ID %d and destination url '%s' was upgraded." %
-        [ad_group_ad[:id], ad_group_ad[:final_urls].first]
-  else
-    raise StandardError, 'failed to upgrade ads.'
-  end
-end
-
-if __FILE__ == $0
-  API_VERSION = :v201603
-
-  begin
-    ad_group_id = 'INSERT_AD_GROUP_ID_HERE'.to_i
-    ad_id = 'INSERT_AD_ID_HERE'.to_i
-    upgrade_ad_url(ad_group_id, ad_id)
-
-  # Authorization error.
-  rescue AdsCommon::Errors::OAuth2VerificationRequired => e
-    puts "Authorization credentials are not valid. Edit adwords_api.yml for " +
-        "OAuth2 client ID and secret and run misc/setup_oauth2.rb example " +
-        "to retrieve and store OAuth2 tokens."
-    puts "See this wiki page for more details:\n\n  " +
-        'https://github.com/googleads/google-api-ads-ruby/wiki/OAuth2'
-
-  # HTTP errors.
-  rescue AdsCommon::Errors::HttpError => e
-    puts "HTTP Error: %s" % e
-
-  # API errors.
-  rescue AdwordsApi::Errors::ApiException => e
-    puts "Message: %s" % e.message
-    puts 'Errors:'
-    e.errors.each_with_index do |error, index|
-      puts "\tError [%d]:" % (index + 1)
-      error.each do |field, value|
-        puts "\t\t%s: %s" % [field, value]
-      end
-    end
-  end
-end

data/examples/v201603/misc/get_all_images_and_videos.rb

@@ -1,104 +0,0 @@
-#!/usr/bin/env ruby
-# Encoding: utf-8
-#
-# Copyright:: Copyright 2011, Google Inc. All Rights Reserved.
-#
-# License:: Licensed under the Apache License, Version 2.0 (the "License");
-#           you may not use this file except in compliance with the License.
-#           You may obtain a copy of the License at
-#
-#           http://www.apache.org/licenses/LICENSE-2.0
-#
-#           Unless required by applicable law or agreed to in writing, software
-#           distributed under the License is distributed on an "AS IS" BASIS,
-#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-#           implied.
-#           See the License for the specific language governing permissions and
-#           limitations under the License.
-#
-# This example illustrates how to retrieve all images and videos. To upload an
-# image, run upload_image.rb. To upload video, see:
-#   http://adwords.google.com/support/aw/bin/answer.py?hl=en&answer=39454.
-
-require 'adwords_api'
-
-def get_all_images_and_videos()
-  # AdwordsApi::Api will read a config file from ENV['HOME']/adwords_api.yml
-  # when called without parameters.
-  adwords = AdwordsApi::Api.new
-
-  # To enable logging of SOAP requests, set the log_level value to 'DEBUG' in
-  # the configuration file or provide your own logger:
-  # adwords.logger = Logger.new('adwords_xml.log')
-
-  media_srv = adwords.service(:MediaService, API_VERSION)
-
-  # Get all the images and videos.
-  selector = {
-    :fields => ['MediaId', 'Height', 'Width', 'MimeType', 'Urls'],
-    :ordering => [
-      {:field => 'MediaId', :sort_order => 'ASCENDING'}
-    ],
-    :predicates => [
-      {:field => 'Type', :operator => 'IN', :values => ['IMAGE', 'VIDEO']}
-    ],
-    :paging => {
-      :start_index => 0,
-      :number_results => PAGE_SIZE
-    }
-  }
-
-  # Set initial values.
-  offset, page = 0, {}
-
-  begin
-    page = media_srv.get(selector)
-    if page[:entries]
-      page[:entries].each do |entry|
-        full_dimensions = entry[:dimensions]['FULL']
-        puts "Entry ID %d with dimensions %dx%d and MIME type is '%s'" %
-            [entry[:media_id], full_dimensions[:height],
-             full_dimensions[:width], entry[:mime_type]]
-      end
-      # Increment values to request the next page.
-      offset += PAGE_SIZE
-      selector[:paging][:start_index] = offset
-    end
-  end while page[:total_num_entries] > offset
-
-  if page.include?(:total_num_entries)
-    puts "\tFound %d entries." % page[:total_num_entries]
-  end
-end
-
-if __FILE__ == $0
-  API_VERSION = :v201603
-  PAGE_SIZE = 500
-
-  begin
-    get_all_images_and_videos()
-
-  # Authorization error.
-  rescue AdsCommon::Errors::OAuth2VerificationRequired => e
-    puts "Authorization credentials are not valid. Edit adwords_api.yml for " +
-        "OAuth2 client ID and secret and run misc/setup_oauth2.rb example " +
-        "to retrieve and store OAuth2 tokens."
-    puts "See this wiki page for more details:\n\n  " +
-        'https://github.com/googleads/google-api-ads-ruby/wiki/OAuth2'
-
-  # HTTP errors.
-  rescue AdsCommon::Errors::HttpError => e
-    puts "HTTP Error: %s" % e
-
-  # API errors.
-  rescue AdwordsApi::Errors::ApiException => e
-    puts "Message: %s" % e.message
-    puts 'Errors:'
-    e.errors.each_with_index do |error, index|
-      puts "\tError [%d]:" % (index + 1)
-      error.each do |field, value|
-        puts "\t\t%s: %s" % [field, value]
-      end
-    end
-  end
-end

data/examples/v201603/misc/setup_oauth2.rb

@@ -1,84 +0,0 @@
-#!/usr/bin/env ruby
-# Encoding: utf-8
-#
-# Copyright:: Copyright 2013, Google Inc. All Rights Reserved.
-#
-# License:: Licensed under the Apache License, Version 2.0 (the "License");
-#           you may not use this file except in compliance with the License.
-#           You may obtain a copy of the License at
-#
-#           http://www.apache.org/licenses/LICENSE-2.0
-#
-#           Unless required by applicable law or agreed to in writing, software
-#           distributed under the License is distributed on an "AS IS" BASIS,
-#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-#           implied.
-#           See the License for the specific language governing permissions and
-#           limitations under the License.
-#
-# This example illustrates how to set up OAuth2 authentication credentials.
-
-require 'adwords_api'
-
-def setup_oauth2()
-  # AdwordsApi::Api will read a config file from ENV['HOME']/adwords_api.yml
-  # when called without parameters.
-  adwords = AdwordsApi::Api.new
-
-  # To enable logging of SOAP requests, set the log_level value to 'DEBUG' in
-  # the configuration file or provide your own logger:
-  # adwords.logger = Logger.new('adwords_xml.log')
-
-  # You can call authorize explicitly to obtain the access token. Otherwise, it
-  # will be invoked automatically on the first API call.
-  # There are two ways to provide verification code, first one is via the block:
-  token = adwords.authorize() do |auth_url|
-    puts "Hit Auth error, please navigate to URL:\n\t%s" % auth_url
-    print 'log in and type the verification code: '
-    verification_code = gets.chomp
-    verification_code
-  end
-  if token
-    print "\nWould you like to update your adwords_api.yml to save " +
-        "OAuth2 credentials? (y/N): "
-    response = gets.chomp
-    if ('y'.casecmp(response) == 0) or ('yes'.casecmp(response) == 0)
-      adwords.save_oauth2_token(token)
-      puts 'OAuth2 token is now saved to ~/adwords_api.yml and will be ' +
-          'automatically used by the library.'
-    end
-  end
-
-  # Alternatively, you can provide one within the parameters:
-  # token = adwords.authorize({:oauth2_verification_code => verification_code})
-
-  # Note, 'token' is a Hash. Its value is not used in this example. If you need
-  # to be able to access the API in offline mode, with no user present, you
-  # should persist it to be used in subsequent invocations like this:
-  # adwords.authorize({:oauth2_token => token})
-
-  # No exception thrown - we are good to make a request.
-end
-
-if __FILE__ == $0
-  API_VERSION = :v201603
-
-  begin
-    setup_oauth2()
-
-  # HTTP errors.
-  rescue AdsCommon::Errors::HttpError => e
-    puts "HTTP Error: %s" % e
-
-  # API errors.
-  rescue AdwordsApi::Errors::ApiException => e
-    puts "Message: %s" % e.message
-    puts 'Errors:'
-    e.errors.each_with_index do |error, index|
-      puts "\tError [%d]:" % (index + 1)
-      error.each do |field, value|
-        puts "\t\t%s: %s" % [field, value]
-      end
-    end
-  end
-end

data/examples/v201603/misc/upload_image.rb

@@ -1,93 +0,0 @@
-#!/usr/bin/env ruby
-# Encoding: utf-8
-#
-# Copyright:: Copyright 2011, Google Inc. All Rights Reserved.
-#
-# License:: Licensed under the Apache License, Version 2.0 (the "License");
-#           you may not use this file except in compliance with the License.
-#           You may obtain a copy of the License at
-#
-#           http://www.apache.org/licenses/LICENSE-2.0
-#
-#           Unless required by applicable law or agreed to in writing, software
-#           distributed under the License is distributed on an "AS IS" BASIS,
-#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-#           implied.
-#           See the License for the specific language governing permissions and
-#           limitations under the License.
-#
-# This example uploads an image. To get images, run get_all_images.rb.
-
-require 'adwords_api'
-require 'base64'
-
-def upload_image()
-  # AdwordsApi::Api will read a config file from ENV['HOME']/adwords_api.yml
-  # when called without parameters.
-  adwords = AdwordsApi::Api.new
-
-  # To enable logging of SOAP requests, set the log_level value to 'DEBUG' in
-  # the configuration file or provide your own logger:
-  # adwords.logger = Logger.new('adwords_xml.log')
-
-  media_srv = adwords.service(:MediaService, API_VERSION)
-
-  # Create image.
-  image_url =
-      'http://www.google.com/intl/en/adwords/select/images/samples/inline.jpg'
-  # This utility method retrieves the contents of a URL using all of the config
-  # options provided to the Api object.
-  image_data = AdsCommon::Http.get(image_url, adwords.config)
-  base64_image_data = Base64.encode64(image_data)
-  image = {
-    # The 'xsi_type' field allows you to specify the xsi:type of the object
-    # being created. It's only necessary when you must provide an explicit
-    # type that the client library can't infer.
-    :xsi_type => 'Image',
-    :data => base64_image_data,
-    :type => 'IMAGE'
-  }
-
-  # Upload image.
-  response = media_srv.upload([image])
-  if response and !response.empty?
-    ret_image = response.first
-    full_dimensions = ret_image[:dimensions]['FULL']
-    puts ("Image with ID %d, dimensions %dx%d and MIME type '%s' uploaded " +
-        "successfully.") % [ret_image[:media_id], full_dimensions[:height],
-         full_dimensions[:width], ret_image[:mime_type]]
-  else
-    puts 'No images uploaded.'
-  end
-end
-
-if __FILE__ == $0
-  API_VERSION = :v201603
-
-  begin
-    upload_image()
-
-  # Authorization error.
-  rescue AdsCommon::Errors::OAuth2VerificationRequired => e
-    puts "Authorization credentials are not valid. Edit adwords_api.yml for " +
-        "OAuth2 client ID and secret and run misc/setup_oauth2.rb example " +
-        "to retrieve and store OAuth2 tokens."
-    puts "See this wiki page for more details:\n\n  " +
-        'https://github.com/googleads/google-api-ads-ruby/wiki/OAuth2'
-
-  # HTTP errors.
-  rescue AdsCommon::Errors::HttpError => e
-    puts "HTTP Error: %s" % e
-
-  # API errors.
-  rescue AdwordsApi::Errors::ApiException => e
-    puts "Message: %s" % e.message
-    puts 'Errors:'
-    e.errors.each_with_index do |error, index|
-      puts "\tError [%d]:" % (index + 1)
-      error.each do |field, value|
-        puts "\t\t%s: %s" % [field, value]
-      end
-    end
-  end
-end

data/examples/v201603/misc/upload_media_bundle.rb

@@ -1,90 +0,0 @@
-#!/usr/bin/env ruby
-# Encoding: utf-8
-#
-# Copyright:: Copyright 2015, Google Inc. All Rights Reserved.
-#
-# License:: Licensed under the Apache License, Version 2.0 (the "License");
-#           you may not use this file except in compliance with the License.
-#           You may obtain a copy of the License at
-#
-#           http://www.apache.org/licenses/LICENSE-2.0
-#
-#           Unless required by applicable law or agreed to in writing, software
-#           distributed under the License is distributed on an "AS IS" BASIS,
-#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-#           implied.
-#           See the License for the specific language governing permissions and
-#           limitations under the License.
-#
-# This example uploads an HTML5 zip file.
-
-require 'adwords_api'
-require 'base64'
-
-def upload_media_bundle()
-  # AdwordsApi::Api will read a config file from ENV['HOME']/adwords_api.yml
-  # when called without parameters.
-  adwords = AdwordsApi::Api.new
-
-  # To enable logging of SOAP requests, set the log_level value to 'DEBUG' in
-  # the configuration file or provide your own logger:
-  # adwords.logger = Logger.new('adwords_xml.log')
-
-  media_srv = adwords.service(:MediaService, API_VERSION)
-
-  # Create HTML5 media.
-  html5_url = 'https://goo.gl/9Y7qI2'
-  # This utility method retrieves the contents of a URL using all of the config
-  # options provided to the Api object.
-  html5_data = AdsCommon::Http.get(html5_url, adwords.config)
-  base64_html5_data = Base64.encode64(html5_data)
-  media_bundle = {
-    :xsi_type => 'MediaBundle',
-    :data => base64_html5_data,
-    :type => 'MEDIA_BUNDLE'
-  }
-
-  # Upload HTML5 zip.
-  response = media_srv.upload([media_bundle])
-  if response and !response.empty?
-    ret_html5 = response.first
-    full_dimensions = ret_html5[:dimensions]['FULL']
-    puts ("HTML5 media with ID %d, dimensions %dx%d and MIME type '%s' " +
-        "uploaded successfully.") % [ret_html5[:media_id],
-        full_dimensions[:height], full_dimensions[:width],
-        ret_html5[:mime_type]]
-  else
-    puts 'No HTML5 zip was uploaded.'
-  end
-end
-
-if __FILE__ == $0
-  API_VERSION = :v201603
-
-  begin
-    upload_media_bundle()
-
-  # Authorization error.
-  rescue AdsCommon::Errors::OAuth2VerificationRequired => e
-    puts "Authorization credentials are not valid. Edit adwords_api.yml for " +
-        "OAuth2 client ID and secret and run misc/setup_oauth2.rb example " +
-        "to retrieve and store OAuth2 tokens."
-    puts "See this wiki page for more details:\n\n  " +
-        'https://github.com/googleads/google-api-ads-ruby/wiki/OAuth2'
-
-  # HTTP errors.
-  rescue AdsCommon::Errors::HttpError => e
-    puts "HTTP Error: %s" % e
-
-  # API errors.
-  rescue AdwordsApi::Errors::ApiException => e
-    puts "Message: %s" % e.message
-    puts 'Errors:'
-    e.errors.each_with_index do |error, index|
-      puts "\tError [%d]:" % (index + 1)
-      error.each do |field, value|
-        puts "\t\t%s: %s" % [field, value]
-      end
-    end
-  end
-end