google-adwords-api 0.18.3 → 0.19.0

data/examples/v201506/basic_operations/update_campaign.rb

@@ -1,86 +0,0 @@
-#!/usr/bin/env ruby
-# Encoding: utf-8
-#
-# Copyright:: Copyright 2011, Google Inc. All Rights Reserved.
-#
-# License:: Licensed under the Apache License, Version 2.0 (the "License");
-#           you may not use this file except in compliance with the License.
-#           You may obtain a copy of the License at
-#
-#           http://www.apache.org/licenses/LICENSE-2.0
-#
-#           Unless required by applicable law or agreed to in writing, software
-#           distributed under the License is distributed on an "AS IS" BASIS,
-#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-#           implied.
-#           See the License for the specific language governing permissions and
-#           limitations under the License.
-#
-# This example illustrates how to update a campaign, setting its status to
-# 'PAUSED'. To create a campaign, run add_campaigns.rb.
-
-require 'adwords_api'
-
-def update_campaign(campaign_id)
-  # AdwordsApi::Api will read a config file from ENV['HOME']/adwords_api.yml
-  # when called without parameters.
-  adwords = AdwordsApi::Api.new
-
-  # To enable logging of SOAP requests, set the log_level value to 'DEBUG' in
-  # the configuration file or provide your own logger:
-  # adwords.logger = Logger.new('adwords_xml.log')
-
-  campaign_srv = adwords.service(:CampaignService, API_VERSION)
-
-  # Prepare for updating campaign.
-  operation = {
-    :operator => 'SET',
-    :operand => {
-      :id => campaign_id,
-      :status => 'PAUSED'
-    }
-  }
-
-  # Update campaign.
-  response = campaign_srv.mutate([operation])
-  if response and response[:value]
-    campaign = response[:value].first
-    puts "Campaign ID %d was successfully updated, status was set to '%s'." %
-        [campaign[:id], campaign[:status]]
-  else
-    puts 'No campaigns were updated.'
-  end
-end
-
-if __FILE__ == $0
-  API_VERSION = :v201506
-
-  begin
-    # ID of a campaign to update.
-    campaign_id = 'INSERT_CAMPAIGN_ID_HERE'.to_i
-    update_campaign(campaign_id)
-
-  # Authorization error.
-  rescue AdsCommon::Errors::OAuth2VerificationRequired => e
-    puts "Authorization credentials are not valid. Edit adwords_api.yml for " +
-        "OAuth2 client ID and secret and run misc/setup_oauth2.rb example " +
-        "to retrieve and store OAuth2 tokens."
-    puts "See this wiki page for more details:\n\n  " +
-        'https://github.com/googleads/google-api-ads-ruby/wiki/OAuth2'
-
-  # HTTP errors.
-  rescue AdsCommon::Errors::HttpError => e
-    puts "HTTP Error: %s" % e
-
-  # API errors.
-  rescue AdwordsApi::Errors::ApiException => e
-    puts "Message: %s" % e.message
-    puts 'Errors:'
-    e.errors.each_with_index do |error, index|
-      puts "\tError [%d]:" % (index + 1)
-      error.each do |field, value|
-        puts "\t\t%s: %s" % [field, value]
-      end
-    end
-  end
-end

data/examples/v201506/basic_operations/update_keyword.rb

@@ -1,106 +0,0 @@
-#!/usr/bin/env ruby
-# Encoding: utf-8
-#
-# Copyright:: Copyright 2011, Google Inc. All Rights Reserved.
-#
-# License:: Licensed under the Apache License, Version 2.0 (the "License");
-#           you may not use this file except in compliance with the License.
-#           You may obtain a copy of the License at
-#
-#           http://www.apache.org/licenses/LICENSE-2.0
-#
-#           Unless required by applicable law or agreed to in writing, software
-#           distributed under the License is distributed on an "AS IS" BASIS,
-#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-#           implied.
-#           See the License for the specific language governing permissions and
-#           limitations under the License.
-#
-# This example updates the bid of a keyword. To create a keyword, run
-# add_keywords.rb.
-
-require 'adwords_api'
-
-def update_keyword(ad_group_id, criterion_id)
-  # AdwordsApi::Api will read a config file from ENV['HOME']/adwords_api.yml
-  # when called without parameters.
-  adwords = AdwordsApi::Api.new
-
-  # To enable logging of SOAP requests, set the log_level value to 'DEBUG' in
-  # the configuration file or provide your own logger:
-  # adwords.logger = Logger.new('adwords_xml.log')
-
-  ad_group_criterion_srv =
-      adwords.service(:AdGroupCriterionService, API_VERSION)
-
-  # Prepare for updating a keyword.
-  operation = {
-    :operator => 'SET',
-    :operand => {
-      # The 'xsi_type' field allows you to specify the xsi:type of the object
-      # being created. It's only necessary when you must provide an explicit
-      # type that the client library can't infer.
-      :xsi_type => 'BiddableAdGroupCriterion',
-      :ad_group_id => ad_group_id,
-      :criterion => {
-        :id => criterion_id
-      },
-      :bidding_strategy_configuration => {
-        :bids => [
-          {
-            :xsi_type => 'CpcBid',
-            :bid => {:micro_amount => 1000000}
-          }
-        ]
-      }
-    }
-  }
-
-  # Update criterion.
-  response = ad_group_criterion_srv.mutate([operation])
-  if response and response[:value]
-    ad_group_criterion = response[:value].first
-    puts "Keyword ID %d was successfully updated, current bids are:" %
-        ad_group_criterion[:criterion][:id]
-    ad_group_criterion[:bidding_strategy_configuration][:bids].each do |bid|
-      puts "\tType: '%s', value: %d" %
-          [bid[:bids_type], bid[:bid][:micro_amount]]
-    end
-  else
-    puts 'No keywords were updated.'
-  end
-end
-
-if __FILE__ == $0
-  API_VERSION = :v201506
-
-  begin
-    # IDs of a criterion to update and its ad group.
-    ad_group_id = 'INSERT_AD_GROUP_ID_HERE'.to_i
-    criterion_id = 'INSERT_CRITERION_ID_HERE'.to_i
-    update_keyword(ad_group_id, criterion_id)
-
-  # Authorization error.
-  rescue AdsCommon::Errors::OAuth2VerificationRequired => e
-    puts "Authorization credentials are not valid. Edit adwords_api.yml for " +
-        "OAuth2 client ID and secret and run misc/setup_oauth2.rb example " +
-        "to retrieve and store OAuth2 tokens."
-    puts "See this wiki page for more details:\n\n  " +
-        'https://github.com/googleads/google-api-ads-ruby/wiki/OAuth2'
-
-  # HTTP errors.
-  rescue AdsCommon::Errors::HttpError => e
-    puts "HTTP Error: %s" % e
-
-  # API errors.
-  rescue AdwordsApi::Errors::ApiException => e
-    puts "Message: %s" % e.message
-    puts 'Errors:'
-    e.errors.each_with_index do |error, index|
-      puts "\tError [%d]:" % (index + 1)
-      error.each do |field, value|
-        puts "\t\t%s: %s" % [field, value]
-      end
-    end
-  end
-end

data/examples/v201506/campaign_management/add_campaign_labels.rb

@@ -1,82 +0,0 @@
-#!/usr/bin/env ruby
-# Encoding: utf-8
-#
-# Copyright:: Copyright 2014, Google Inc. All Rights Reserved.
-#
-# License:: Licensed under the Apache License, Version 2.0 (the "License");
-#           you may not use this file except in compliance with the License.
-#           You may obtain a copy of the License at
-#
-#           http://www.apache.org/licenses/LICENSE-2.0
-#
-#           Unless required by applicable law or agreed to in writing, software
-#           distributed under the License is distributed on an "AS IS" BASIS,
-#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-#           implied.
-#           See the License for the specific language governing permissions and
-#           limitations under the License.
-#
-# This example adds a label to multiple campaigns.
-
-require 'adwords_api'
-
-def add_campaign_labels(campaign_ids, label_id)
-  # AdwordsApi::Api will read a config file from ENV['HOME']/adwords_api.yml
-  # when called without parameters.
-  adwords = AdwordsApi::Api.new
-
-  # To enable logging of SOAP requests, set the log_level value to 'DEBUG' in
-  # the configuration file or provide your own logger:
-  # adwords.logger = Logger.new('adwords_xml.log')
-
-  campaign_srv = adwords.service(:CampaignService, API_VERSION)
-
-  operations = campaign_ids.map do |campaign_id|
-    {
-      :operator => 'ADD',
-      :operand => {:campaign_id => campaign_id, :label_id => label_id}
-    }
-  end
-
-  response = campaign_srv.mutate_label(operations)
-  if response and response[:value]
-    response[:value].each do |campaign_label|
-      puts "Campaign label for campaign ID %d and label ID %d was added.\n" %
-          [campaign_label[:campaign_id], campaign_label[:label_id]]
-    end
-  end
-end
-
-if __FILE__ == $0
-  API_VERSION = :v201506
-
-  begin
-    campaign_id_1 = 'INSERT_CAMPAIGN_ID_1_HERE'.to_i
-    campaign_id_2 = 'INSERT_CAMPAIGN_ID_2_HERE'.to_i
-    label_id = 'INSERT_LABEL_ID_HERE'.to_i
-    add_campaign_labels([campaign_id_1, campaign_id_2], label_id)
-
-  # Authorization error.
-  rescue AdsCommon::Errors::OAuth2VerificationRequired => e
-    puts "Authorization credentials are not valid. Edit adwords_api.yml for " +
-        "OAuth2 client ID and secret and run misc/setup_oauth2.rb example " +
-        "to retrieve and store OAuth2 tokens."
-    puts "See this wiki page for more details:\n\n  " +
-        'https://github.com/googleads/google-api-ads-ruby/wiki/OAuth2'
-
-  # HTTP errors.
-  rescue AdsCommon::Errors::HttpError => e
-    puts "HTTP Error: %s" % e
-
-  # API errors.
-  rescue AdwordsApi::Errors::ApiException => e
-    puts "Message: %s" % e.message
-    puts 'Errors:'
-    e.errors.each_with_index do |error, index|
-      puts "\tError [%d]:" % (index + 1)
-      error.each do |field, value|
-        puts "\t\t%s: %s" % [field, value]
-      end
-    end
-  end
-end

data/examples/v201506/campaign_management/add_experiment.rb

@@ -1,162 +0,0 @@
-#!/usr/bin/env ruby
-# Encoding: utf-8
-#
-# Copyright:: Copyright 2011, Google Inc. All Rights Reserved.
-#
-# License:: Licensed under the Apache License, Version 2.0 (the "License");
-#           you may not use this file except in compliance with the License.
-#           You may obtain a copy of the License at
-#
-#           http://www.apache.org/licenses/LICENSE-2.0
-#
-#           Unless required by applicable law or agreed to in writing, software
-#           distributed under the License is distributed on an "AS IS" BASIS,
-#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-#           implied.
-#           See the License for the specific language governing permissions and
-#           limitations under the License.
-#
-# This example creates an experiment using a query percentage of 10, which
-# defines what fraction of auctions should go to the control split (90%) vs.
-# the experiment split (10%), then adds experimental bid changes for criteria
-# and ad groups. To get campaigns, run get_campaigns.rb. To get ad groups,
-# run get_ad_groups.rb. To get keywords, run get_keywords.rb.
-
-require 'adwords_api'
-require 'date'
-
-def add_experiment(campaign_id, ad_group_id, criterion_id)
-  # AdwordsApi::Api will read a config file from ENV['HOME']/adwords_api.yml
-  # when called without parameters.
-  adwords = AdwordsApi::Api.new
-
-  # To enable logging of SOAP requests, set the log_level value to 'DEBUG' in
-  # the configuration file or provide your own logger:
-  # adwords.logger = Logger.new('adwords_xml.log')
-
-  experiment_srv = adwords.service(:ExperimentService, API_VERSION)
-  ad_group_srv = adwords.service(:AdGroupService, API_VERSION)
-  ad_group_criterion_srv =
-      adwords.service(:AdGroupCriterionService, API_VERSION)
-
-  # Prepare for adding experiment.
-  operation = {
-    :operator => 'ADD',
-    :operand => {
-      :campaign_id => campaign_id,
-      :name => "Interplanetary Experiment #%d" % (Time.new.to_f * 1000).to_i,
-      :query_percentage => 10,
-      :start_date_time => Time.now.strftime('%Y%m%d %H%M%S'),
-      # Optional fields:
-      :status => 'ENABLED',
-      :end_date_time =>
-         DateTime.parse((Date.today + 30).to_s).strftime('%Y%m%d %H%M%S')
-    }
-  }
-
-  # Add experiment.
-  response = experiment_srv.mutate([operation])
-  experiment = response[:value].first
-  puts "Experiment with name '%s' and ID %d was added." %
-      [experiment[:name], experiment[:id]]
-
-  experiment_id = experiment[:id]
-
-  # Setup ad group for the experiment.
-  ad_group = {
-    :id => ad_group_id,
-    # Set experiment data for the ad group.
-    :experiment_data => {
-      :experiment_id => experiment_id,
-      :experiment_delta_status => 'MODIFIED',
-      # Bid multiplier rule that will modify ad group bid for the experiment.
-      :experiment_bid_multipliers => {
-        :xsi_type => 'ManualCPCAdGroupExperimentBidMultipliers',
-        :max_cpc_multiplier => {
-          :multiplier => 1.5
-        }
-      }
-    }
-  }
-
-  # Prepare for updating ad group.
-  operation = {
-    :operator => 'SET',
-    :operand => ad_group
-  }
-
-  # Update ad group.
-  response = ad_group_srv.mutate([operation])
-  ad_group = response[:value].first
-  puts "Ad group ID %d was updated for the experiment." % ad_group[:id]
-
-  # Setup ad group criterion for the experiment.
-  ad_group_criterion = {
-    :xsi_type => 'BiddableAdGroupCriterion',
-    :ad_group_id => ad_group_id,
-    :criterion => {
-      :id => criterion_id
-    },
-    # Set experiment data for the criterion.
-    :experiment_data => {
-      :xsi_type => 'BiddableAdGroupCriterionExperimentData',
-      :experiment_id => experiment_id,
-      :experiment_delta_status => 'MODIFIED',
-      # Bid multiplier rule that will modify criterion bid for the experiment.
-      :experiment_bid_multiplier => {
-        :xsi_type => 'ManualCPCAdGroupCriterionExperimentBidMultiplier',
-        :max_cpc_multiplier => {
-          :multiplier => 1.5
-        }
-      }
-    }
-  }
-
-  # Prepare for updating ad group criterion.
-  operation = {
-    :operator => 'SET',
-    :operand => ad_group_criterion
-  }
-
-  # Update criterion.
-  response = ad_group_criterion_srv.mutate([operation])
-  criterion = response[:value].first
-  puts "Criterion ID %d was successfully updated for the experiment." %
-      [criterion[:criterion][:id]]
-
-end
-
-if __FILE__ == $0
-  API_VERSION = :v201506
-
-  begin
-    # IDs of the required objects.
-    campaign_id = 'INSERT_CAMPAIGN_ID_HERE'.to_i
-    ad_group_id = 'INSERT_AD_GROUP_ID_HERE'.to_i
-    criterion_id = 'INSERT_CRITERION_ID_HERE'.to_i
-    add_experiment(campaign_id, ad_group_id, criterion_id)
-
-  # Authorization error.
-  rescue AdsCommon::Errors::OAuth2VerificationRequired => e
-    puts "Authorization credentials are not valid. Edit adwords_api.yml for " +
-        "OAuth2 client ID and secret and run misc/setup_oauth2.rb example " +
-        "to retrieve and store OAuth2 tokens."
-    puts "See this wiki page for more details:\n\n  " +
-        'https://github.com/googleads/google-api-ads-ruby/wiki/OAuth2'
-
-  # HTTP errors.
-  rescue AdsCommon::Errors::HttpError => e
-    puts "HTTP Error: %s" % e
-
-  # API errors.
-  rescue AdwordsApi::Errors::ApiException => e
-    puts "Message: %s" % e.message
-    puts 'Errors:'
-    e.errors.each_with_index do |error, index|
-      puts "\tError [%d]:" % (index + 1)
-      error.each do |field, value|
-        puts "\t\t%s: %s" % [field, value]
-      end
-    end
-  end
-end

data/examples/v201506/campaign_management/add_keywords_in_bulk.rb

@@ -1,153 +0,0 @@
-#!/usr/bin/env ruby
-# Encoding: utf-8
-#
-# Copyright:: Copyright 2011, Google Inc. All Rights Reserved.
-#
-# License:: Licensed under the Apache License, Version 2.0 (the "License");
-#           you may not use this file except in compliance with the License.
-#           You may obtain a copy of the License at
-#
-#           http://www.apache.org/licenses/LICENSE-2.0
-#
-#           Unless required by applicable law or agreed to in writing, software
-#           distributed under the License is distributed on an "AS IS" BASIS,
-#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-#           implied.
-#           See the License for the specific language governing permissions and
-#           limitations under the License.
-#
-# This code sample illustrates how to add many keywords using asynchronous
-# requests and MutateJobService.
-
-require 'adwords_api'
-
-def add_keywords_in_bulk()
-  # AdwordsApi::Api will read a config file from ENV['HOME']/adwords_api.yml
-  # when called without parameters.
-  adwords = AdwordsApi::Api.new
-
-  # To enable logging of SOAP requests, set the log_level value to 'DEBUG' in
-  # the configuration file or provide your own logger:
-  # adwords.logger = Logger.new('adwords_xml.log')
-
-  mutate_job_srv = adwords.service(:MutateJobService, API_VERSION)
-
-  ad_group_id = 'INSERT_AD_GROUP_ID_HERE'.to_i
-
-  # Create AdGroupCriterionOperations to add keywords.
-  operations = (1..KEYWORD_NUMBER).map do |index|
-    {:xsi_type => 'AdGroupCriterionOperation',
-     :operator => 'ADD',
-     :operand => {
-       :xsi_type => 'BiddableAdGroupCriterion',
-       :ad_group_id => ad_group_id,
-       :criterion => {
-         :xsi_type => 'Keyword',
-         :match_type => 'BROAD',
-         :text => "mars%d" % index}}}
-  end
-
-  # You can specify up to 3 job IDs that must successfully complete before
-  # this job can be processed.
-  policy = {:prerequisite_job_ids => []}
-
-  # Call mutate to create a new job.
-  response = mutate_job_srv.mutate(operations, policy)
-
-  raise StandardError, 'Failed to submit a job; aborting.' unless response
-
-  job_id = response[:id]
-  puts "Job ID %d was successfully created." % job_id
-
-  # Creating selector to retrive hob status and wait for it to complete.
-  selector = {
-      :xsi_type => 'BulkMutateJobSelector',
-      :job_ids => [job_id]
-  }
-
-  status = nil
-
-  # Poll for job status until it's finished.
-  puts 'Retrieving job status...'
-  RETRIES_COUNT.times do |retry_attempt|
-    job_status_response = mutate_job_srv.get(selector)
-    if job_status_response
-      status = job_status_response.first[:status]
-      case status
-        when 'FAILED'
-          raise StandardError, "Job failed with reason: '%s'" %
-              job_status_response.first[:failure_reason]
-        when 'COMPLETED'
-          puts "[%d] Job finished with status '%s'" % [retry_attempt, status]
-          break
-        else
-          puts "[%d] Current status is '%s', waiting %d seconds to retry..." %
-              [retry_attempt, status, RETRY_INTERVAL]
-          sleep(RETRY_INTERVAL)
-      end
-    else
-      raise StandardError, 'Error retrieving job status; aborting.'
-    end
-  end
-
-  if status == 'COMPLETED'
-    # Get the job result. Here we re-use the same selector.
-    result_response = mutate_job_srv.get_result(selector)
-
-    if result_response and result_response[:simple_mutate_result]
-      results = result_response[:simple_mutate_result][:results]
-      if results
-        results.each_with_index do |result, index|
-          result_message = result.include?(:place_holder) ?
-              'FAILED' : 'SUCCEEDED'
-          puts "Operation [%d] - %s" % [index, result_message]
-        end
-      end
-      errors = result_response[:simple_mutate_result][:errors]
-      if errors
-        errors.each do |error|
-          puts "Error, reason: '%s', trigger: '%s', field path: '%s'" %
-            [error[:reason], error[:trigger], error[:field_path]]
-        end
-      end
-    else
-      raise StandardError, 'Error retrieving job results; aborting.'
-    end
-  else
-    puts "Job failed to complete after %d retries." % RETRY_COUNT
-  end
-end
-
-if __FILE__ == $0
-  API_VERSION = :v201506
-  RETRY_INTERVAL = 30
-  RETRIES_COUNT = 30
-  KEYWORD_NUMBER = 100
-
-  begin
-    add_keywords_in_bulk()
-
-  # Authorization error.
-  rescue AdsCommon::Errors::OAuth2VerificationRequired => e
-    puts "Authorization credentials are not valid. Edit adwords_api.yml for " +
-        "OAuth2 client ID and secret and run misc/setup_oauth2.rb example " +
-        "to retrieve and store OAuth2 tokens."
-    puts "See this wiki page for more details:\n\n  " +
-        'https://github.com/googleads/google-api-ads-ruby/wiki/OAuth2'
-
-  # HTTP errors.
-  rescue AdsCommon::Errors::HttpError => e
-    puts "HTTP Error: %s" % e
-
-  # API errors.
-  rescue AdwordsApi::Errors::ApiException => e
-    puts "Message: %s" % e.message
-    puts 'Errors:'
-    e.errors.each_with_index do |error, index|
-      puts "\tError [%d]:" % (index + 1)
-      error.each do |field, value|
-        puts "\t\t%s: %s" % [field, value]
-      end
-    end
-  end
-end