google-adwords-api 0.1.0

data/examples/v200909/get_all_paused_campaigns.rb

@@ -0,0 +1,86 @@
+#!/usr/bin/ruby
+#
+# Author:: api.sgomes@gmail.com (Sérgio Gomes)
+#
+# Copyright:: Copyright 2011, Google Inc. All Rights Reserved.
+#
+# License:: Licensed under the Apache License, Version 2.0 (the "License");
+#           you may not use this file except in compliance with the License.
+#           You may obtain a copy of the License at
+#
+#           http://www.apache.org/licenses/LICENSE-2.0
+#
+#           Unless required by applicable law or agreed to in writing, software
+#           distributed under the License is distributed on an "AS IS" BASIS,
+#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+#           implied.
+#           See the License for the specific language governing permissions and
+#           limitations under the License.
+#
+# This example illustrates how to retrieve all the paused campaigns for an
+# account.
+#
+# Tags: CampaignService.get
+
+require 'rubygems'
+gem 'google-adwords-api'
+require 'adwords_api'
+
+API_VERSION = :v200909
+
+def get_all_paused_campaigns()
+  # AdwordsApi::Api will read a config file from ENV['HOME']/adwords_api.yml
+  # when called without parameters.
+  adwords = AdwordsApi::Api.new
+  campaign_srv = adwords.service(:CampaignService, API_VERSION)
+
+  # Get all the paused campaigns for this account.
+  selector = {
+    :campaign_statuses => 'PAUSED'
+  }
+  response = campaign_srv.get(selector)
+
+  if response and response[:entries]
+    campaigns = response[:entries]
+    campaigns.each do |campaign|
+      puts "Campaign name is \"#{campaign[:name]}\", id is #{campaign[:id]} " +
+          "and status is \"#{campaign[:status]}\"."
+    end
+  else
+    puts "No campaigns were found."
+  end
+end
+
+if __FILE__ == $0
+  # To enable logging of SOAP requests, set the ADWORDSAPI_DEBUG environment
+  # variable to 'true'. This can be done either from your operating system
+  # environment or via code, as done below.
+  ENV['ADWORDSAPI_DEBUG'] = 'false'
+
+  begin
+    get_all_paused_campaigns()
+
+  # Connection error. Likely transitory.
+  rescue Errno::ECONNRESET, SOAP::HTTPStreamError, SocketError => e
+    puts 'Connection Error: %s' % e
+    puts 'Source: %s' % e.backtrace.first
+
+  # API Error.
+  rescue AdwordsApi::Errors::ApiException => e
+    puts 'API Exception caught.'
+    puts 'Message: %s' % e.message
+    puts 'Code: %d' % e.code if e.code
+    puts 'Trigger: %s' % e.trigger if e.trigger
+    puts 'Errors:'
+    if e.errors
+      e.errors.each_with_index do |error, index|
+        puts ' %d. Error type is %s. Fields:' % [index + 1, error[:xsi_type]]
+        error.each_pair do |field, value|
+          if field != :xsi_type
+            puts '     %s: %s' % [field, value]
+          end
+        end
+      end
+    end
+  end
+end

data/examples/v200909/get_conversion_optimizer_eligibility.rb

@@ -0,0 +1,112 @@
+#!/usr/bin/ruby
+#
+# Author:: api.sgomes@gmail.com (Sérgio Gomes)
+#
+# Copyright:: Copyright 2011, Google Inc. All Rights Reserved.
+#
+# License:: Licensed under the Apache License, Version 2.0 (the "License");
+#           you may not use this file except in compliance with the License.
+#           You may obtain a copy of the License at
+#
+#           http://www.apache.org/licenses/LICENSE-2.0
+#
+#           Unless required by applicable law or agreed to in writing, software
+#           distributed under the License is distributed on an "AS IS" BASIS,
+#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+#           implied.
+#           See the License for the specific language governing permissions and
+#           limitations under the License.
+#
+# This example shows how to check for conversion optimizer eligibility by
+# attempting to set the bidding transition with the validate only header set to
+# true.
+#
+# Tags: CampaignService.mutate
+
+require 'rubygems'
+gem 'google-adwords-api'
+require 'adwords_api'
+
+API_VERSION = :v200909
+
+def get_conversion_optimizer_eligibility()
+  # AdwordsApi::Api will read a config file from ENV['HOME']/adwords_api.yml
+  # when called without parameters.
+  adwords = AdwordsApi::Api.new
+  campaign_srv = adwords.service(:CampaignService, API_VERSION)
+
+  campaign_id = 'INSERT_CAMPAIGN_ID_HERE'.to_i
+
+  # Enable 'validate only'
+  adwords.validate_only = true
+
+  # Prepare for "updating" campaign.
+  operation = {
+    :operator => 'SET',
+    :operand => {
+      :id => campaign_id
+    },
+    # Bidding transition.
+    :bidding_transition => {
+      :xsi_type => 'ConversionOptimizerBiddingTransition',
+      :target_bidding_strategy => {
+        :xsi_type => 'ConversionOptimizer',
+        :pricing_model => 'CONVERSIONS'
+      },
+      # Ad group bids.
+      :explicit_ad_group_bids => {
+        :xsi_type => 'ConversionOptimizerAdGroupBids'
+      }
+    }
+  }
+
+  # Check that campaign is eligible for conversion optimization.
+  begin
+    response = campaign_srv.mutate([operation])
+    puts 'Campaign id %d is eligible to use conversion optimizer.' %
+        campaign[:id]
+  rescue AdwordsApi::Errors::ApiException => e
+    errors = e.errors
+    error = errors.find { |err| err[:xsi_type] == 'BiddingTransitionError'}
+    if error
+      puts "Campaign id #{campaign_id} is not eligible to use conversion " +
+          "optimizer due to reason: #{error[:reason]}"
+    else
+      raise e
+    end
+  end
+end
+
+if __FILE__ == $0
+  # To enable logging of SOAP requests, set the ADWORDSAPI_DEBUG environment
+  # variable to 'true'. This can be done either from your operating system
+  # environment or via code, as done below.
+  ENV['ADWORDSAPI_DEBUG'] = 'false'
+
+  begin
+    get_conversion_optimizer_eligibility()
+
+  # Connection error. Likely transitory.
+  rescue Errno::ECONNRESET, SOAP::HTTPStreamError, SocketError => e
+    puts 'Connection Error: %s' % e
+    puts 'Source: %s' % e.backtrace.first
+
+  # API Error.
+  rescue AdwordsApi::Errors::ApiException => e
+    puts 'API Exception caught.'
+    puts 'Message: %s' % e.message
+    puts 'Code: %d' % e.code if e.code
+    puts 'Trigger: %s' % e.trigger if e.trigger
+    puts 'Errors:'
+    if e.errors
+      e.errors.each_with_index do |error, index|
+        puts ' %d. Error type is %s. Fields:' % [index + 1, error[:xsi_type]]
+        error.each_pair do |field, value|
+          if field != :xsi_type
+            puts '     %s: %s' % [field, value]
+          end
+        end
+      end
+    end
+  end
+end

data/examples/v200909/get_geo_location_info.rb

@@ -0,0 +1,108 @@
+#!/usr/bin/ruby
+#
+# Author:: api.sgomes@gmail.com (Sérgio Gomes)
+#
+# Copyright:: Copyright 2011, Google Inc. All Rights Reserved.
+#
+# License:: Licensed under the Apache License, Version 2.0 (the "License");
+#           you may not use this file except in compliance with the License.
+#           You may obtain a copy of the License at
+#
+#           http://www.apache.org/licenses/LICENSE-2.0
+#
+#           Unless required by applicable law or agreed to in writing, software
+#           distributed under the License is distributed on an "AS IS" BASIS,
+#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+#           implied.
+#           See the License for the specific language governing permissions and
+#           limitations under the License.
+#
+# This example illustrates how to retrieve geo location information for
+# addresses.
+#
+# Tags: GeoLocationService.get
+
+require 'rubygems'
+gem 'google-adwords-api'
+require 'adwords_api'
+
+API_VERSION = :v200909
+
+def get_geo_location_info()
+  # AdwordsApi::Api will read a config file from ENV['HOME']/adwords_api.yml
+  # when called without parameters.
+  adwords = AdwordsApi::Api.new
+  geo_location_srv = adwords.service(:GeoLocationService, API_VERSION)
+
+  selector = {
+    :addresses => [
+      {
+        :street_address => '1600 Amphitheatre Parkway',
+        :city_name => 'Mountain View',
+        :province_code => 'US-CA',
+        :province_name => 'California',
+        :postal_code => '94043',
+        :country_code => 'US'
+      },
+      {
+        :street_address => '76 Ninth Avenue',
+        :city_name => 'New York',
+        :province_code => 'US-NY',
+        :province_name => 'New York',
+        :postal_code => '10011',
+        :country_code => 'US'
+      },
+      {
+        :street_address => '五四大街1号, Beijing东城区',
+        :country_code => 'CN'
+      }
+    ]
+  }
+
+  # Get the geo location info for the various addresses.
+  locations = geo_location_srv.get(selector)
+
+  if locations
+    locations.each do |location|
+      puts "Address \"#{location[:address][:street_address]}\" has latitude " +
+          "#{location[:geo_point][:latitude_in_micro_degrees]} and " +
+          "longitude #{location[:geo_point][:longitude_in_micro_degrees]}."
+    end
+  else
+    puts "No geo locations were returned."
+  end
+end
+
+if __FILE__ == $0
+  # To enable logging of SOAP requests, set the ADWORDSAPI_DEBUG environment
+  # variable to 'true'. This can be done either from your operating system
+  # environment or via code, as done below.
+  ENV['ADWORDSAPI_DEBUG'] = 'false'
+
+  begin
+    get_geo_location_info()
+
+  # Connection error. Likely transitory.
+  rescue Errno::ECONNRESET, SOAP::HTTPStreamError, SocketError => e
+    puts 'Connection Error: %s' % e
+    puts 'Source: %s' % e.backtrace.first
+
+  # API Error.
+  rescue AdwordsApi::Errors::ApiException => e
+    puts 'API Exception caught.'
+    puts 'Message: %s' % e.message
+    puts 'Code: %d' % e.code if e.code
+    puts 'Trigger: %s' % e.trigger if e.trigger
+    puts 'Errors:'
+    if e.errors
+      e.errors.each_with_index do |error, index|
+        puts ' %d. Error type is %s. Fields:' % [index + 1, error[:xsi_type]]
+        error.each_pair do |field, value|
+          if field != :xsi_type
+            puts '     %s: %s' % [field, value]
+          end
+        end
+      end
+    end
+  end
+end

data/examples/v200909/get_method_cost.rb

@@ -0,0 +1,96 @@
+#!/usr/bin/ruby
+#
+# Author:: api.sgomes@gmail.com (Sérgio Gomes)
+#
+# Copyright:: Copyright 2011, Google Inc. All Rights Reserved.
+#
+# License:: Licensed under the Apache License, Version 2.0 (the "License");
+#           you may not use this file except in compliance with the License.
+#           You may obtain a copy of the License at
+#
+#           http://www.apache.org/licenses/LICENSE-2.0
+#
+#           Unless required by applicable law or agreed to in writing, software
+#           distributed under the License is distributed on an "AS IS" BASIS,
+#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+#           implied.
+#           See the License for the specific language governing permissions and
+#           limitations under the License.
+#
+# This example illustrates how to retrieve the cost, in API units of operation,
+# of the given method, on a specified date.
+#
+# Tags: InfoService.get
+
+require 'rubygems'
+gem 'google-adwords-api'
+require 'adwords_api'
+
+API_VERSION = :v200909
+
+def get_method_cost()
+  # AdwordsApi::Api will read a config file from ENV['HOME']/adwords_api.yml
+  # when called without parameters.
+  adwords = AdwordsApi::Api.new
+  info_srv = adwords.service(:InfoService, API_VERSION)
+
+  date = Time.now
+  service_name = 'AdGroupService'
+  method_name = 'mutate'
+  operator = 'SET'
+
+  selector = {
+    :api_usage_type => 'METHOD_COST',
+    :service_name => service_name,
+    :method_name => method_name,
+    :operator => operator,
+    :date_range => {
+      :min => date.strftime('%Y%m%d'),
+      :max => date.strftime('%Y%m%d')
+    }
+  }
+
+  # Get the unit info.
+  adwords.use_mcc do
+    info = info_srv.get(selector)
+    if info
+      puts 'The cost of the %s.%s %s method during %s is %d.' %
+          [service_name, method_name, operator, selector[:date_range][:min],
+           info[:cost]]
+    end
+  end
+end
+
+if __FILE__ == $0
+  # To enable logging of SOAP requests, set the ADWORDSAPI_DEBUG environment
+  # variable to 'true'. This can be done either from your operating system
+  # environment or via code, as done below.
+  ENV['ADWORDSAPI_DEBUG'] = 'false'
+
+  begin
+    get_method_cost()
+
+  # Connection error. Likely transitory.
+  rescue Errno::ECONNRESET, SOAP::HTTPStreamError, SocketError => e
+    puts 'Connection Error: %s' % e
+    puts 'Source: %s' % e.backtrace.first
+
+  # API Error.
+  rescue AdwordsApi::Errors::ApiException => e
+    puts 'API Exception caught.'
+    puts 'Message: %s' % e.message
+    puts 'Code: %d' % e.code if e.code
+    puts 'Trigger: %s' % e.trigger if e.trigger
+    puts 'Errors:'
+    if e.errors
+      e.errors.each_with_index do |error, index|
+        puts ' %d. Error type is %s. Fields:' % [index + 1, error[:xsi_type]]
+        error.each_pair do |field, value|
+          if field != :xsi_type
+            puts '     %s: %s' % [field, value]
+          end
+        end
+      end
+    end
+  end
+end

data/examples/v200909/get_operation_count.rb

@@ -0,0 +1,88 @@
+#!/usr/bin/ruby
+#
+# Author:: api.sgomes@gmail.com (Sérgio Gomes)
+#
+# Copyright:: Copyright 2011, Google Inc. All Rights Reserved.
+#
+# License:: Licensed under the Apache License, Version 2.0 (the "License");
+#           you may not use this file except in compliance with the License.
+#           You may obtain a copy of the License at
+#
+#           http://www.apache.org/licenses/LICENSE-2.0
+#
+#           Unless required by applicable law or agreed to in writing, software
+#           distributed under the License is distributed on an "AS IS" BASIS,
+#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+#           implied.
+#           See the License for the specific language governing permissions and
+#           limitations under the License.
+#
+# This example illustrates how to retrieve the number of operations recorded for
+# the developer token being used to make this call over the given date range.
+#
+# Tags: InfoService.get
+
+require 'rubygems'
+gem 'google-adwords-api'
+require 'adwords_api'
+
+API_VERSION = :v200909
+
+def get_operation_count()
+  # AdwordsApi::Api will read a config file from ENV['HOME']/adwords_api.yml
+  # when called without parameters.
+  adwords = AdwordsApi::Api.new
+  info_srv = adwords.service(:InfoService, API_VERSION)
+
+  selector = {
+    :api_usage_type => 'OPERATION_COUNT',
+    :date_range => {
+      :min => Time.now.strftime('%Y%m01'),
+      :max => Time.now.strftime('%Y%m%d')
+    }
+  }
+
+  # Get the operation info.
+  adwords.use_mcc do
+    info = info_srv.get(selector)
+    if info
+      puts 'The total number of operations performed from %s to %s is %d.' %
+          [selector[:date_range][:min], selector[:date_range][:max],
+          info[:cost]]
+    end
+  end
+end
+
+if __FILE__ == $0
+  # To enable logging of SOAP requests, set the ADWORDSAPI_DEBUG environment
+  # variable to 'true'. This can be done either from your operating system
+  # environment or via code, as done below.
+  ENV['ADWORDSAPI_DEBUG'] = 'false'
+
+  begin
+    get_operation_count()
+
+  # Connection error. Likely transitory.
+  rescue Errno::ECONNRESET, SOAP::HTTPStreamError, SocketError => e
+    puts 'Connection Error: %s' % e
+    puts 'Source: %s' % e.backtrace.first
+
+  # API Error.
+  rescue AdwordsApi::Errors::ApiException => e
+    puts 'API Exception caught.'
+    puts 'Message: %s' % e.message
+    puts 'Code: %d' % e.code if e.code
+    puts 'Trigger: %s' % e.trigger if e.trigger
+    puts 'Errors:'
+    if e.errors
+      e.errors.each_with_index do |error, index|
+        puts ' %d. Error type is %s. Fields:' % [index + 1, error[:xsi_type]]
+        error.each_pair do |field, value|
+          if field != :xsi_type
+            puts '     %s: %s' % [field, value]
+          end
+        end
+      end
+    end
+  end
+end