gollum 1.3.1 → 1.4.2

data/lib/gollum/frontend/public/javascript/MathJax/docs/html/_sources/options/MMLorHTML.txt

@@ -1,42 +0,0 @@
-.. _configure-MMLorHTML:
-
-***********************************
-The MMLorHTML configuration options
-***********************************
-
-The options below control the operation of the MMLorHTML configuration
-file that is run when you include ``"MMLorHTML.js"`` in the `config`
-array of your configuration.  They are listed with their default
-values.  To set any of these options, include a ``MMLorHTML`` section
-in your :meth:`MathJax.Hub.Config()` call.  For example
-
-.. code-block:: javascript
-
-    MathJax.Hub.Config({
-      MMLorHTML: {
-        prefer: {
-	  Opera: "MML"
-	}
-      }
-    });
-
-would set the ``prefer`` option so that Opera browser would prefer
-MathML to HTML-CSS output (while leaving the settings for other
-browsers unchanged).
-
-Note that if you use the ``MMLorHTML.js`` configuration file, you should
-**not** specify an output processor in the `jax` array of your
-configuration; `MMLorHTML` will fill that in for you.
-
-.. describe:: prefer: { MSIE: "MML", Firefox: "MML", Opera: "HTML", other: "HTML" }
-
-   This lets you set the preferred renderer on a browser-by-browser
-   basis.  You set the browser to either ``"MML"`` or ``"HTML"``
-   depending on whether you want to use the `NativeMML` or `HTML-CSS`
-   output processor.  Note that although Opera does process some MathML
-   natively, its support is not sufficient to handle the more
-   complicated output generated by MathJax, so its setting is
-   ``"HTML"`` by default.
-
-
-

data/lib/gollum/frontend/public/javascript/MathJax/docs/html/_sources/options/MathML.txt

@@ -1,27 +0,0 @@
-.. _configure-MathML:
-
-**************************
-The MathML input processor
-**************************
-
-The options below control the operation of the MathML input processor
-that is run when you include ``"input/MathML"`` in the `jax` array of
-your configuration.  They are listed with their default values.  To
-set any of these options, include a ``MathML`` section in your
-:meth:`MathJax.Hub.Config()` call.  For example
-
-.. code-block:: javascript
-
-    MathJax.Hub.Config({
-      MathML: {
-        useMathMLspacing: true
-      }
-    });
-
-would set the ``useMathMLspacing`` option so that the MathML rules for
-spacing would be used (rather than TeX spacing rules).
-
-.. describe:: useMathMLspacing: false
-
-    Specifies whether to use TeX spacing or MathML spacing when the
-    `HTML-CSS` output jax is used.

data/lib/gollum/frontend/public/javascript/MathJax/docs/html/_sources/options/MathMenu.txt

@@ -1,79 +0,0 @@
-.. _configure-MathMenu:
-
-**********************
-The MathMenu extension
-**********************
-
-The options below control the operation of the contextual menu that is
-available on mathematics that is typeset by MathJax.
-They are listed with their default values.  To set any of these
-options, include a ``MathMenu`` section in your
-:meth:`MathJax.Hub.Config()` call.  For example
-
-.. code-block:: javascript
-
-    MathJax.Hub.Config({
-      MathMenu: {
-        delay: 600
-      }
-    });
-
-would set the ``delay`` option to 600 milliseconds.
-
-.. describe:: delay: 400
-
-    This is the hover delay for the display (in milliseconds) for
-    submenus in the contextual menu:  when the mouse is over a submenu
-    label for this long, the menu will appear.  (The submenu also will
-    appear if you click on its label.)
-
-.. describe:: helpURL: "http://www.mathjax.org/help/user/"
-
-    This is the URL for the MathJax Help menu item.  When the user
-    selects that item, the browser opens a new window with this URL.
-
-.. describe:: showRenderer: true
-
-   This controls whether the "Math Renderer" item will be displayed in
-   the the "Settings" submenu of the mathematics contextual menu.  It
-   allows the user to change between the `HTML-CSS` and `NativeMML`
-   output processors for the mathematics on the page.  Set to
-   ``false`` to prevent this menu item from showing.
-   
-.. describe:: showContext: false
-
-   This controls whether the "Contextual Menu" item will be displayed
-   in the the "Settings" submenu of the mathematics contextual menu.
-   It allows the user to decide whether the MathJax menu or the
-   browser's default contextual manu will be shown when the context
-   menu click occurs over mathematics typeset by MathJax.  (The main
-   reason to allow pass-through to the browser's menu is to gain
-   access to the MathPlayer contextual menu when the NativeMML output
-   processor is used in Internet Explorer with the `MathPlayer plugin
-   <http://www.dessci.com/en/products/mathplayer/>`_.)  Set to
-   ``false`` to prevent this menu item from showing.
-   
-.. describe:: showFontMenu: false
-
-   This controls whether the "Font Preference" item will be displayed
-   in the the "Settings" submenu of the mathematics contextual menu.
-   This submenu lets the user select what font to use in the
-   mathematics produced by the `HTML-CSS` output processor.  Note that
-   changing the selection in the font menu will cause the page to
-   reload.  Set to ``false`` to prevent this menu item from showing.
-   
-.. describe:: windowSettings: { ... }
-
-    These are the settings for the ``window.open()`` call that
-    creates the `Show Source` window.  The initial width and height
-    will be reset after the source is shown in an attempt to make the
-    window fit the output better.
-
-.. describe:: styles: {}
-
-    This is a list of CSS declarations for styling the menu
-    components.  See the definitions in ``extensions/MathMenu.js`` for
-    details of what are defined by default.  See :ref:`CSS Style
-    Objects <css-style-objects>` for details on how to specify CSS
-    style in a JavaScript object.
-

data/lib/gollum/frontend/public/javascript/MathJax/docs/html/_sources/options/MathZoom.txt

@@ -1,42 +0,0 @@
-.. _configure-MathZoom:
-
-**********************
-The MathZoom extension
-**********************
-
-The options below control the operation of the Math-Zoom feature that
-allows users to see an enlarged version of the mathematics when they
-click or hover over typeset mathematics.  They are listed with their
-default values.  To set any of these options, include a ``MathZoom``
-section in your :meth:`MathJax.Hub.Config()` call.  For example
-
-.. code-block:: javascript
-
-    MathJax.Hub.Config({
-      MathZoom: {
-        delay: 600
-      }
-    });
-
-would set the ``delay`` option to 600 milliseconds.
-
-Mathematics is zoomed when the user "triggers" the zoom by an action,
-either clicking on the mathematics, double-clicking on it, or holding
-the mouse still over it (i.e., "hovering").  Which trigger is used is
-set by the user via the math contextual menu (or by the author using
-the ``menuSettings`` configuration section).
-
-.. describe:: delay: 400
-
-   This the time (in milliseconds) that the mouse must be still over a
-   typeset mathematical formula before the zoomed version is displayed
-   (when the zoom trigger is set to `Hover`).
-
-.. describe:: styles: {}
-
-    This is a list of CSS declarations for styling the zoomed
-    mathematics.  See the definitions in ``extensions/MathZoom.js``
-    for details of what are defined by default.  See :ref:`CSS Style
-    Objects <css-style-objects>` for details on how to specify CSS
-    style in a JavaScript object.
-

data/lib/gollum/frontend/public/javascript/MathJax/docs/html/_sources/options/NativeMML.txt

@@ -1,61 +0,0 @@
-.. _configure-NativeMML:
-
-******************************
-The NativeMML output processor
-******************************
-
-The options below control the operation of the NativeMML output
-processor that is run when you include ``"output/NativeMML"`` in the
-`jax` array of your configuration.  They are listed with their default
-values.  To set any of these options, include a ``NativeMML`` section
-in your :meth:`MathJax.Hub.Config()` call.  For example
-
-.. code-block:: javascript
-
-    MathJax.Hub.Config({
-      NativeMML: {
-        scale: 105
-      }
-    });
-
-would set the ``sale`` option to 105 percent.
-
-.. describe:: scale: 100
-
-    The scaling factor (as a percentage) of math with respect to the
-    surrounding text.  Since the `NativeMML` output relies on the
-    browser's natiove MathML support, MathJax does not control the
-    font size used in the mathematics.  You may need to set this value
-    to compensate for the size selected by the browser.  The user can
-    also adjust this value using the contextual menu item associated
-    with the typeset mathematics.
-
-.. describe:: showMathMath: true
-
-    This controls whether the MathJax contextual menu will be
-    available on the mathematics in the page.  If true, then
-    right-clicking (on the PC) or control-clicking (on the Mac) will
-    produce a MathJax menu that allows you to get the source of the
-    mathematics in various formats, change the size of the mathematics
-    relative to the surrounding text, get information about
-    MathJax, and configure other MathJax settings.
-     
-    Set this to ``false`` to disable the menu.  When ``true``, the
-    ``MathMenu`` configuration block determines the operation of the
-    menu.  See :ref:`the MathMenu options <configure-MathMenu>` for
-    more details.
-
-.. describe:: showMathMenuMSIE: true
-
-    There is a separate menu setting for MSIE since the code to handle
-    that is a bit delicate; if it turns out to have unexpected
-    consequences, you can turn it off without turing off other the
-    menu support in other browsers.
-   
-.. describe:: styles: {}
-
-    This is a list of CSS declarations for styling the HTML-CSS
-    output.  See the definitions in ``jax/output/NativeMML/config.js``
-    for some examples of what are defined by default.  See :ref:`CSS
-    Style Objects <css-style-objects>` for details on how to specify
-    CSS style in a JavaScript object.

data/lib/gollum/frontend/public/javascript/MathJax/docs/html/_sources/options/TeX.txt

@@ -1,67 +0,0 @@
-.. _configure-TeX:
-
-***********************
-The TeX input processor
-***********************
-
-The options below control the operation of the TeX input processor
-that is run when you include ``"input/TeX"`` in the `jax` array of
-your configuration.  They are listed with their default values.  To
-set any of these options, include a ``TeX`` section in your
-:meth:`MathJax.Hub.Config()` call.  For example
-
-.. code-block:: javascript
-
-    MathJax.Hub.Config({
-      TeX: {
-        Macros: {
-	  RR: '{\\bf R}',
-	  bold: ['{\\bf #1}', 1]
-	}
-      }
-    });
-
-would set the ``Macros`` configuration option to cause two new macros
-to be defined within the TeX input processor.
-
-.. describe:: TagSide: "right"
-
-    This specifies the side on which ``\tag{}`` macros will place the
-    tags.  Set it to ``"left"`` to place the tags on the left-hand side.
-
-.. describe:: TagIndent: ".8em"
-
-    This is the amount of indentation (from the right or left) for the
-    tags produced by the ``\tag{}`` macro.
-
-.. describe:: MultLineWidth: "85%"
-
-    The width to use for the `multline` environment that is part of
-    the ``AMSmath`` extension.  This width gives room for tags at
-    either side of the equation, but if you are displaying mathematics
-    in a small area or a thin column of text, you might need to change
-    the value to leave sufficient margin for tags.
-    
-.. describe:: Macros: {}
-
-   This lists macros to define before the TeX input processor begins.
-   These are name:value pairs where the `name` gives the name of the TeX
-   macro to be defined, and `value` gives the replacement text for the
-   macro.  The `value` canbe an array of the form `[value,n]`, where
-   `value` is the replacement text and `n` is the number of parameters
-   for the macro.  Note that since the `value` is a javascript string,
-   backslashes in the replacement text must be doubled to prevent them
-   from acting as javascript escape characters.
-
-   For example,
-
-   .. code-block:: javascript
-
-       Macros: {
-         RR: '{\\bf R}',
-	 bold: ['{\\bf #1}', 1]
-       }
-
-   would ask the TeX processor to define two new macros:  ``\RR``,
-   which produces a bold-face "R", and ``\bold{...}``, which takes one
-   parameter and set it in the bold-face font.

data/lib/gollum/frontend/public/javascript/MathJax/docs/html/_sources/options/hub.txt

@@ -1,209 +0,0 @@
-.. _configure-hub:
-
-******************************
-The Core Configuration Options
-******************************
-
-The options below control the MathJax Hub, and so determine the code
-behavior of MathJax.  They are given with their default values.  
-
-.. describe:: jax: ["input/TeX","output/HTML-CSS"]
-
-    A comma-separated list of input and output jax to initialize at
-    startup.  Their main code is loaded only when they are actually
-    used, so it is not inefficient to include jax that may not
-    actually be used on the page. These are found in the ``MathJax/jax``
-    directory.
-
-.. describe:: extensions: []
-
-    A comma-separated list of extensions to load at startup. The
-    default directory is ``MathJax/extensions``.  The ``tex2jax`` and
-    ``mml2jax`` preprocessors can be listed here, as well as a number
-    of TeX-specific extensions (see the :ref:`TeX and LaTeX input
-    <tex-and-latex-input>` section of the :ref:`Getting Started
-    <getting-started>` document for more details).  There is also a
-    ``FontWarnings`` extension that you can use to inform your user
-    that mathematics fonts are available that they can download to
-    improve their experience of your site.
-
-.. describe:: config: []
-
-    A comma-separated list of configuration files to load when MathJax
-    starts up, e.g., to define local macros, etc., and there is a
-    sample config file named ``config/local/local.js``.  The default
-    directory is the `MathJax/config` directory.  The ``MMLorHTML.js``
-    configuration is the only other predefined configuration file.
-
-.. describe:: styleSheets: []
-
-    A comma-separated list of CSS stylesheet files to be loaded when
-    MathJax starts up.  The default directory is the `MathJax/config`
-    directory.
-
-.. describe:: styles: {}
-
-    CSS `selector: rules;` styles to be defined dynamically at startup
-    time.
-
-.. describe:: preJax: null and postJax: null
-
-    Patterns to remove from before and after math script tags. If you
-    are not using one of the preprocessors, you need to insert
-    something extra into your HTML file in order to avoid a bug in
-    Internet Explorer.  IE removes spaces from the DOM that it thinks
-    are redundent, and since a ``<script>`` tag usually doesn't add
-    content to the page, if there is a space before and after a
-    MathJax ``<script>`` tag, IE will remove the first space.  When
-    MathJax inserts the typeset mathematics, this means there will be
-    no space before it and the preceeding text.  In order to avoid
-    this, you should include some "guard characters" before or after
-    the math SCRIPT tag; define the patterns you want to use below.
-    Note that these are used as regular expressions, so you will need
-    to quote special characters.  Furthermore, since they are
-    javascript strings, you must quote javascript special characters
-    as well.  So to obtain a backslash, you must use ``\\`` (doubled
-    for javascript).  For example, ``"\\["`` represents the pattern
-    ``\[`` in the regular expression.  That means that if you want an
-    actual backslash in your guard characters, you need to use
-    ``"\\\\"`` in order to get ``\\`` in the regular expression, and
-    ``\`` in the actual text.  If both preJax and postJax are defined,
-    both must be present in order to be removed.
-
-    See also the ``preRemoveClass`` comments below.
-
-    Examples:
-
-        ``preJax: "\\\\\\\\\"`` makes a double backslash the preJax text
-
-	``preJax: "\\[\\[", postJax: "\\]\\]"`` makes it so jax
-	scripts must be enclosed in double brackets.
-
-.. describe:: preRemoveClass: "MathJax_Preview"
-
-    The CSS class for a math preview to be removed preceeding a
-    MathJax SCRIPT tag.  If the tag just before the MathJax
-    ``<script>`` tag is of this class, its contents are removed when
-    MathJax processes the ``<script>`` tag.  This allows you to
-    include a math preview in a form that will be displayed prior to
-    MathJax performing its typesetting.  It also avoids the Internet
-    Explorer space-removal bug, and can be used in place of ``preJax``
-    and ``postJax`` if that is more convenient.
-
-    For example
-
-    .. code-block:: html
-    
-        <span class="MathJax_Preview">[math]</span><script  type="math/tex">...</script>
-  
-    would display "[math]" in place of the math until MathJax is able
-    to typeset it.
-
-    See also the ``preJax`` and ``postJax`` comments above.
-
-.. describe:: showProcessingMessages: true
-
-    This value controls whether the `Processing Math: nn%` message are
-    displayed in the lower left-hand corner. Set to ``false`` to
-    prevent those messages (though file loading and other messages
-    will still be shown).
-
-.. describe:: messageStyle: "normal"
-
-    This value controls the verbosity of the messages in the lower
-    left-hand corner.  Set it to ``"none"`` to eliminate all messages,
-    or set it to ``"simple"`` to show "Loading..." and "Processing..."
-    rather than showing the full file name or the percentage of the
-    mathematics processed.
-
-.. describe:: displayAlign: "center" and displayIndent: "0em"
-
-    These two parameters control the alignment and shifting of
-    displayed equations.  The first can be ``"left"``, ``"center"``,
-    or ``"right"``, and determines the alignment of displayed
-    equations.  When the alignment is not ``"center"``, the second
-    determines an indentation from the left or right side for the
-    displayed equations.
-
-
-.. describe:: delayStartupUntil: "none"
-
-    Normally MathJax will perform its starup commands (loading of
-    configuration, styles, jax, and so on) as soon as it can.  If you
-    expect to be doing additional configuration on the page, however,
-    you may want to have it wait until the page's onload hander is
-    called.  If so, set this to ``"onload"``.
-
-.. describe:: skipStartupTypeset: false
-
-    Normally MathJax will typeset the mathematics on the page as soon
-    as the page is loaded.  If you want to delay that process, in
-    which case you will need to call :meth:`MathJax.Hub.Typeset()`
-    yourself by hand, set this value to ``true``.
-
-.. describe:: menuSettings: { ... }
-
-    This block contains settings for the mathematics contextual menu
-    that act as the defaults for the user's settings in that menu.
-    The possible values are:
-
-    .. describe:: zoom: "none"
-
-        This indicates when typeset mathematics should be zoomed.  It
-        can be set to ``"None"``, ``"Hover"``, ``"Click"``, or
-        ``"Double-Click"`` to set the zoom trigger.
-
-    .. describe:: CTRL: false, ALT: false, CMD: false, Shift: false
-
-        These values indicate which keys must be pressed in order for
-        math zoom to be triggered.  For example, if ``CTRL`` is set to
-        ``true`` and ``zoom`` is ``"Click"``, then math will be zoomed
-        only when the user control-clicks on mathematics (i.e., clicks
-        while holding down the `CTRL` key).  If more than one is
-        ``true``, then all the indicated keys must be pressed for the
-        zoom to occur.
-
-    .. describe:: zscale: "200%"
-
-        This is the zoom scaling factor, and it can be set to any of
-	the values available in the `Zoom Factor` menu of the
-	`Settings` submenu of the contextual menu.
-
-    .. describe:: context: "MathJax"
-
-        This controls what contextual menu will be presented when a
-        right click (on a PC) or CTRL-click (on the Mac) occurs over a
-        typeset equation.  When set to ``"MathJax"``, the MathJax
-        contextual menu will appear; when set to ``"Browser"``, the
-        browser's contextual menu will be used.  For example, in
-        Internet Explorer with the MathPlayer plugin, if this is set
-        to ``"Browser"``, you will get the MathPlayer contextual menu
-        rather than the MathJax menu.
-
-    There are also settings for ``format``, ``renderer``, and ``font``,
-    but these are maintained by MathJax and should not be set by the
-    page author.
-
-.. describe:: errorSettings: { ... }
-
-    This block contains settings that control how MathJax responds to
-    unexpected errors while processing mathematical equations.  Rather
-    than simply crash, MathJax can report an error and go on.  The
-    options you can set include:
-
-    .. describe:: message: ["[Math Processing Error"]]
-
-        This is an HTML snippet that will be inserted at the location
-        of the mathematics for any formula that causes MathJax to
-        produce an internal error (i.e., an error in the MathJax code
-        itself).  See the :ref:`description of HTML snippets
-        <html-snippets>` for details on how to represent HTML code in
-        this way.
-
-    .. describe:: style: {color:"#CC0000", "font-style":"italic"}
-
-        This is the CSS style description to use for the error
-        messages produced by internal MathJax errors.  See the section
-        on :ref:`CSS style objects <css-style-objects>` for details on
-        how these are specified in JavaScript.
-