gollum 1.1.1 → 1.2.0

data/test/examples/lotr.git/hooks/applypatch-msg.sample

@@ -1,15 +0,0 @@
-#!/bin/sh
-#
-# An example hook script to check the commit log message taken by
-# applypatch from an e-mail message.
-#
-# The hook should exit with non-zero status after issuing an
-# appropriate message if it wants to stop the commit.  The hook is
-# allowed to edit the commit message file.
-#
-# To enable this hook, rename this file to "applypatch-msg".
-
-. git-sh-setup
-test -x "$GIT_DIR/hooks/commit-msg" &&
-	exec "$GIT_DIR/hooks/commit-msg" ${1+"$@"}
-:

data/test/examples/lotr.git/hooks/commit-msg.sample

@@ -1,24 +0,0 @@
-#!/bin/sh
-#
-# An example hook script to check the commit log message.
-# Called by git-commit with one argument, the name of the file
-# that has the commit message.  The hook should exit with non-zero
-# status after issuing an appropriate message if it wants to stop the
-# commit.  The hook is allowed to edit the commit message file.
-#
-# To enable this hook, rename this file to "commit-msg".
-
-# Uncomment the below to add a Signed-off-by line to the message.
-# Doing this in a hook is a bad idea in general, but the prepare-commit-msg
-# hook is more suited to it.
-#
-# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
-# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1"
-
-# This example catches duplicate Signed-off-by lines.
-
-test "" = "$(grep '^Signed-off-by: ' "$1" |
-	 sort | uniq -c | sed -e '/^[ 	]*1[ 	]/d')" || {
-	echo >&2 Duplicate Signed-off-by lines.
-	exit 1
-}

data/test/examples/lotr.git/hooks/post-commit.sample

@@ -1,8 +0,0 @@
-#!/bin/sh
-#
-# An example hook script that is called after a successful
-# commit is made.
-#
-# To enable this hook, rename this file to "post-commit".
-
-: Nothing

data/test/examples/lotr.git/hooks/post-receive.sample

@@ -1,15 +0,0 @@
-#!/bin/sh
-#
-# An example hook script for the "post-receive" event.
-#
-# The "post-receive" script is run after receive-pack has accepted a pack
-# and the repository has been updated.  It is passed arguments in through
-# stdin in the form
-#  <oldrev> <newrev> <refname>
-# For example:
-#  aa453216d1b3e49e7f6f98441fa56946ddcd6a20 68f7abf4e6f922807889f52bc043ecd31b79f814 refs/heads/master
-#
-# see contrib/hooks/ for a sample, or uncomment the next line and
-# rename the file to "post-receive".
-
-#. /usr/share/doc/git-core/contrib/hooks/post-receive-email

data/test/examples/lotr.git/hooks/post-update.sample

@@ -1,8 +0,0 @@
-#!/bin/sh
-#
-# An example hook script to prepare a packed repository for use over
-# dumb transports.
-#
-# To enable this hook, rename this file to "post-update".
-
-exec git-update-server-info

data/test/examples/lotr.git/hooks/pre-applypatch.sample

@@ -1,14 +0,0 @@
-#!/bin/sh
-#
-# An example hook script to verify what is about to be committed
-# by applypatch from an e-mail message.
-#
-# The hook should exit with non-zero status after issuing an
-# appropriate message if it wants to stop the commit.
-#
-# To enable this hook, rename this file to "pre-applypatch".
-
-. git-sh-setup
-test -x "$GIT_DIR/hooks/pre-commit" &&
-	exec "$GIT_DIR/hooks/pre-commit" ${1+"$@"}
-:

data/test/examples/lotr.git/hooks/pre-commit.sample

@@ -1,46 +0,0 @@
-#!/bin/sh
-#
-# An example hook script to verify what is about to be committed.
-# Called by git-commit with no arguments.  The hook should
-# exit with non-zero status after issuing an appropriate message if
-# it wants to stop the commit.
-#
-# To enable this hook, rename this file to "pre-commit".
-
-if git-rev-parse --verify HEAD >/dev/null 2>&1
-then
-	against=HEAD
-else
-	# Initial commit: diff against an empty tree object
-	against=4b825dc642cb6eb9a060e54bf8d69288fbee4904
-fi
-
-# If you want to allow non-ascii filenames set this variable to true.
-allownonascii=$(git config hooks.allownonascii)
-
-# Cross platform projects tend to avoid non-ascii filenames; prevent
-# them from being added to the repository. We exploit the fact that the
-# printable range starts at the space character and ends with tilde.
-if [ "$allownonascii" != "true" ] &&
-	# Note that the use of brackets around a tr range is ok here, (it's
-	# even required, for portability to Solaris 10's /usr/bin/tr), since
-	# the square bracket bytes happen to fall in the designated range.
-	test "$(git diff --cached --name-only --diff-filter=A -z $against |
-	  LC_ALL=C tr -d '[ -~]\0')"
-then
-	echo "Error: Attempt to add a non-ascii file name."
-	echo
-	echo "This can cause problems if you want to work"
-	echo "with people on other platforms."
-	echo
-	echo "To be portable it is advisable to rename the file ..."
-	echo
-	echo "If you know what you are doing you can disable this"
-	echo "check using:"
-	echo
-	echo "  git config hooks.allownonascii true"
-	echo
-	exit 1
-fi
-
-exec git diff-index --check --cached $against --

data/test/examples/lotr.git/hooks/pre-rebase.sample

@@ -1,169 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2006, 2008 Junio C Hamano
-#
-# The "pre-rebase" hook is run just before "git-rebase" starts doing
-# its job, and can prevent the command from running by exiting with
-# non-zero status.
-#
-# The hook is called with the following parameters:
-#
-# $1 -- the upstream the series was forked from.
-# $2 -- the branch being rebased (or empty when rebasing the current branch).
-#
-# This sample shows how to prevent topic branches that are already
-# merged to 'next' branch from getting rebased, because allowing it
-# would result in rebasing already published history.
-
-publish=next
-basebranch="$1"
-if test "$#" = 2
-then
-	topic="refs/heads/$2"
-else
-	topic=`git symbolic-ref HEAD` ||
-	exit 0 ;# we do not interrupt rebasing detached HEAD
-fi
-
-case "$topic" in
-refs/heads/??/*)
-	;;
-*)
-	exit 0 ;# we do not interrupt others.
-	;;
-esac
-
-# Now we are dealing with a topic branch being rebased
-# on top of master.  Is it OK to rebase it?
-
-# Does the topic really exist?
-git show-ref -q "$topic" || {
-	echo >&2 "No such branch $topic"
-	exit 1
-}
-
-# Is topic fully merged to master?
-not_in_master=`git-rev-list --pretty=oneline ^master "$topic"`
-if test -z "$not_in_master"
-then
-	echo >&2 "$topic is fully merged to master; better remove it."
-	exit 1 ;# we could allow it, but there is no point.
-fi
-
-# Is topic ever merged to next?  If so you should not be rebasing it.
-only_next_1=`git-rev-list ^master "^$topic" ${publish} | sort`
-only_next_2=`git-rev-list ^master           ${publish} | sort`
-if test "$only_next_1" = "$only_next_2"
-then
-	not_in_topic=`git-rev-list "^$topic" master`
-	if test -z "$not_in_topic"
-	then
-		echo >&2 "$topic is already up-to-date with master"
-		exit 1 ;# we could allow it, but there is no point.
-	else
-		exit 0
-	fi
-else
-	not_in_next=`git-rev-list --pretty=oneline ^${publish} "$topic"`
-	perl -e '
-		my $topic = $ARGV[0];
-		my $msg = "* $topic has commits already merged to public branch:\n";
-		my (%not_in_next) = map {
-			/^([0-9a-f]+) /;
-			($1 => 1);
-		} split(/\n/, $ARGV[1]);
-		for my $elem (map {
-				/^([0-9a-f]+) (.*)$/;
-				[$1 => $2];
-			} split(/\n/, $ARGV[2])) {
-			if (!exists $not_in_next{$elem->[0]}) {
-				if ($msg) {
-					print STDERR $msg;
-					undef $msg;
-				}
-				print STDERR " $elem->[1]\n";
-			}
-		}
-	' "$topic" "$not_in_next" "$not_in_master"
-	exit 1
-fi
-
-exit 0
-
-################################################################
-
-This sample hook safeguards topic branches that have been
-published from being rewound.
-
-The workflow assumed here is:
-
- * Once a topic branch forks from "master", "master" is never
-   merged into it again (either directly or indirectly).
-
- * Once a topic branch is fully cooked and merged into "master",
-   it is deleted.  If you need to build on top of it to correct
-   earlier mistakes, a new topic branch is created by forking at
-   the tip of the "master".  This is not strictly necessary, but
-   it makes it easier to keep your history simple.
-
- * Whenever you need to test or publish your changes to topic
-   branches, merge them into "next" branch.
-
-The script, being an example, hardcodes the publish branch name
-to be "next", but it is trivial to make it configurable via
-$GIT_DIR/config mechanism.
-
-With this workflow, you would want to know:
-
-(1) ... if a topic branch has ever been merged to "next".  Young
-    topic branches can have stupid mistakes you would rather
-    clean up before publishing, and things that have not been
-    merged into other branches can be easily rebased without
-    affecting other people.  But once it is published, you would
-    not want to rewind it.
-
-(2) ... if a topic branch has been fully merged to "master".
-    Then you can delete it.  More importantly, you should not
-    build on top of it -- other people may already want to
-    change things related to the topic as patches against your
-    "master", so if you need further changes, it is better to
-    fork the topic (perhaps with the same name) afresh from the
-    tip of "master".
-
-Let's look at this example:
-
-		   o---o---o---o---o---o---o---o---o---o "next"
-		  /       /           /           /
-		 /   a---a---b A     /           /
-		/   /               /           /
-	       /   /   c---c---c---c B         /
-	      /   /   /             \         /
-	     /   /   /   b---b C     \       /
-	    /   /   /   /             \     /
-    ---o---o---o---o---o---o---o---o---o---o---o "master"
-
-
-A, B and C are topic branches.
-
- * A has one fix since it was merged up to "next".
-
- * B has finished.  It has been fully merged up to "master" and "next",
-   and is ready to be deleted.
-
- * C has not merged to "next" at all.
-
-We would want to allow C to be rebased, refuse A, and encourage
-B to be deleted.
-
-To compute (1):
-
-	git-rev-list ^master ^topic next
-	git-rev-list ^master        next
-
-	if these match, topic has not merged in next at all.
-
-To compute (2):
-
-	git-rev-list master..topic
-
-	if this is empty, it is fully merged to "master".

data/test/examples/lotr.git/hooks/prepare-commit-msg.sample

@@ -1,36 +0,0 @@
-#!/bin/sh
-#
-# An example hook script to prepare the commit log message.
-# Called by git-commit with the name of the file that has the
-# commit message, followed by the description of the commit
-# message's source.  The hook's purpose is to edit the commit
-# message file.  If the hook fails with a non-zero status,
-# the commit is aborted.
-#
-# To enable this hook, rename this file to "prepare-commit-msg".
-
-# This hook includes three examples.  The first comments out the
-# "Conflicts:" part of a merge commit.
-#
-# The second includes the output of "git diff --name-status -r"
-# into the message, just before the "git status" output.  It is
-# commented because it doesn't cope with --amend or with squashed
-# commits.
-#
-# The third example adds a Signed-off-by line to the message, that can
-# still be edited.  This is rarely a good idea.
-
-case "$2,$3" in
-  merge,)
-    perl -i.bak -ne 's/^/# /, s/^# #/#/ if /^Conflicts/ .. /#/; print' "$1" ;;
-
-# ,|template,)
-#   perl -i.bak -pe '
-#      print "\n" . `git diff --cached --name-status -r`
-#	 if /^#/ && $first++ == 0' "$1" ;;
-
-  *) ;;
-esac
-
-# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
-# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1"

data/test/examples/lotr.git/hooks/update.sample

@@ -1,128 +0,0 @@
-#!/bin/sh
-#
-# An example hook script to blocks unannotated tags from entering.
-# Called by git-receive-pack with arguments: refname sha1-old sha1-new
-#
-# To enable this hook, rename this file to "update".
-#
-# Config
-# ------
-# hooks.allowunannotated
-#   This boolean sets whether unannotated tags will be allowed into the
-#   repository.  By default they won't be.
-# hooks.allowdeletetag
-#   This boolean sets whether deleting tags will be allowed in the
-#   repository.  By default they won't be.
-# hooks.allowmodifytag
-#   This boolean sets whether a tag may be modified after creation. By default
-#   it won't be.
-# hooks.allowdeletebranch
-#   This boolean sets whether deleting branches will be allowed in the
-#   repository.  By default they won't be.
-# hooks.denycreatebranch
-#   This boolean sets whether remotely creating branches will be denied
-#   in the repository.  By default this is allowed.
-#
-
-# --- Command line
-refname="$1"
-oldrev="$2"
-newrev="$3"
-
-# --- Safety check
-if [ -z "$GIT_DIR" ]; then
-	echo "Don't run this script from the command line." >&2
-	echo " (if you want, you could supply GIT_DIR then run" >&2
-	echo "  $0 <ref> <oldrev> <newrev>)" >&2
-	exit 1
-fi
-
-if [ -z "$refname" -o -z "$oldrev" -o -z "$newrev" ]; then
-	echo "Usage: $0 <ref> <oldrev> <newrev>" >&2
-	exit 1
-fi
-
-# --- Config
-allowunannotated=$(git config --bool hooks.allowunannotated)
-allowdeletebranch=$(git config --bool hooks.allowdeletebranch)
-denycreatebranch=$(git config --bool hooks.denycreatebranch)
-allowdeletetag=$(git config --bool hooks.allowdeletetag)
-allowmodifytag=$(git config --bool hooks.allowmodifytag)
-
-# check for no description
-projectdesc=$(sed -e '1q' "$GIT_DIR/description")
-case "$projectdesc" in
-"Unnamed repository"* | "")
-	echo "*** Project description file hasn't been set" >&2
-	exit 1
-	;;
-esac
-
-# --- Check types
-# if $newrev is 0000...0000, it's a commit to delete a ref.
-zero="0000000000000000000000000000000000000000"
-if [ "$newrev" = "$zero" ]; then
-	newrev_type=delete
-else
-	newrev_type=$(git-cat-file -t $newrev)
-fi
-
-case "$refname","$newrev_type" in
-	refs/tags/*,commit)
-		# un-annotated tag
-		short_refname=${refname##refs/tags/}
-		if [ "$allowunannotated" != "true" ]; then
-			echo "*** The un-annotated tag, $short_refname, is not allowed in this repository" >&2
-			echo "*** Use 'git tag [ -a | -s ]' for tags you want to propagate." >&2
-			exit 1
-		fi
-		;;
-	refs/tags/*,delete)
-		# delete tag
-		if [ "$allowdeletetag" != "true" ]; then
-			echo "*** Deleting a tag is not allowed in this repository" >&2
-			exit 1
-		fi
-		;;
-	refs/tags/*,tag)
-		# annotated tag
-		if [ "$allowmodifytag" != "true" ] && git rev-parse $refname > /dev/null 2>&1
-		then
-			echo "*** Tag '$refname' already exists." >&2
-			echo "*** Modifying a tag is not allowed in this repository." >&2
-			exit 1
-		fi
-		;;
-	refs/heads/*,commit)
-		# branch
-		if [ "$oldrev" = "$zero" -a "$denycreatebranch" = "true" ]; then
-			echo "*** Creating a branch is not allowed in this repository" >&2
-			exit 1
-		fi
-		;;
-	refs/heads/*,delete)
-		# delete branch
-		if [ "$allowdeletebranch" != "true" ]; then
-			echo "*** Deleting a branch is not allowed in this repository" >&2
-			exit 1
-		fi
-		;;
-	refs/remotes/*,commit)
-		# tracking branch
-		;;
-	refs/remotes/*,delete)
-		# delete tracking branch
-		if [ "$allowdeletebranch" != "true" ]; then
-			echo "*** Deleting a tracking branch is not allowed in this repository" >&2
-			exit 1
-		fi
-		;;
-	*)
-		# Anything else (is there anything else?)
-		echo "*** Update hook: unknown type of update to ref $refname of type $newrev_type" >&2
-		exit 1
-		;;
-esac
-
-# --- Finished
-exit 0