gnarus_exercise 1.0.0

data/config/locales/devise.en.yml

@@ -0,0 +1,57 @@
+# Additional translations at https://github.com/plataformatec/devise/wiki/I18n
+
+en:
+  errors:
+    messages:
+      expired: "has expired, please request a new one"
+      not_found: "not found"
+      already_confirmed: "was already confirmed, please try signing in"
+      not_locked: "was not locked"
+      not_saved:
+        one: "1 error prohibited this %{resource} from being saved:"
+        other: "%{count} errors prohibited this %{resource} from being saved:"
+
+  devise:
+    failure:
+      already_authenticated: 'You are already signed in.'
+      unauthenticated: 'You need to sign in or sign up before continuing.'
+      unconfirmed: 'You have to confirm your account before continuing.'
+      locked: 'Your account is locked.'
+      invalid: 'Invalid email or password.'
+      invalid_token: 'Invalid authentication token.'
+      timeout: 'Your session expired, please sign in again to continue.'
+      inactive: 'Your account was not activated yet.'
+    sessions:
+      signed_in: 'Signed in successfully.'
+      signed_out: 'Signed out successfully.'
+    passwords:
+      send_instructions: 'You will receive an email with instructions about how to reset your password in a few minutes.'
+      updated: 'Your password was changed successfully. You are now signed in.'
+      updated_not_active: 'Your password was changed successfully.'
+      send_paranoid_instructions: "If your e-mail exists on our database, you will receive a password recovery link on your e-mail"
+    confirmations:
+      send_instructions: 'You will receive an email with instructions about how to confirm your account in a few minutes.'
+      send_paranoid_instructions: 'If your e-mail exists on our database, you will receive an email with instructions about how to confirm your account in a few minutes.'
+      confirmed: 'Your account was successfully confirmed. You are now signed in.'
+    registrations:
+      signed_up: 'Welcome! You have signed up successfully.'
+      signed_up_but_unconfirmed: 'A message with a confirmation link has been sent to your email address. Please open the link to activate your account.'
+      signed_up_but_inactive: 'You have signed up successfully. However, we could not sign you in because your account is not yet activated.'
+      signed_up_but_locked: 'You have signed up successfully. However, we could not sign you in because your account is locked.'
+      updated: 'You updated your account successfully.'
+      update_needs_confirmation: "You updated your account successfully, but we need to verify your new email address. Please check your email and click on the confirm link to finalize confirming your new email address."
+      destroyed: 'Bye! Your account was successfully cancelled. We hope to see you again soon.'
+    unlocks:
+      send_instructions: 'You will receive an email with instructions about how to unlock your account in a few minutes.'
+      unlocked: 'Your account has been unlocked successfully. Please sign in to continue.'
+      send_paranoid_instructions: 'If your account exists, you will receive an email with instructions about how to unlock it in a few minutes.'
+    omniauth_callbacks:
+      success: 'Successfully authorized from %{kind} account.'
+      failure: 'Could not authorize you from %{kind} because "%{reason}".'
+    mailer:
+      confirmation_instructions:
+        subject: 'Confirmation instructions'
+      reset_password_instructions:
+        subject: 'Reset password instructions'
+      unlock_instructions:
+        subject: 'Unlock Instructions'

data/config/routes.rb

@@ -0,0 +1,9 @@
+GnarusExercise::Engine.routes.draw do
+  
+  root :to => "exercises#index"
+
+  resources :exercises do
+    resources :attempts
+  end
+  
+end

data/db/migrate/20120405185453_create_gnarus_exercise_exercises.rb

@@ -0,0 +1,10 @@
+class CreateGnarusExerciseExercises < ActiveRecord::Migration
+  def change
+    create_table :gnarus_exercise_exercises do |t|
+      t.integer :author_id
+      t.text :content
+
+      t.timestamps
+    end
+  end
+end

data/db/migrate/20120405185533_create_gnarus_exercise_attempts.rb

@@ -0,0 +1,12 @@
+class CreateGnarusExerciseAttempts < ActiveRecord::Migration
+  def change
+    create_table :gnarus_exercise_attempts do |t|
+      t.references :exercise
+      t.text :return_uri
+      t.text :solution
+
+      t.timestamps
+    end
+    add_index :gnarus_exercise_attempts, :exercise_id
+  end
+end

data/lib/gnarus_exercise.rb

@@ -0,0 +1,4 @@
+require "gnarus_exercise/engine"
+
+module GnarusExercise
+end

data/lib/gnarus_exercise/engine.rb

@@ -0,0 +1,5 @@
+module GnarusExercise
+  class Engine < ::Rails::Engine
+    isolate_namespace GnarusExercise
+  end
+end

data/lib/gnarus_exercise/version.rb

@@ -0,0 +1,3 @@
+module GnarusExercise
+  VERSION = "1.0.0"
+end

data/lib/tasks/gnarus_exercise_tasks.rake

@@ -0,0 +1,4 @@
+# desc "Explaining what the task does"
+# task :gnarus_exercise do
+#   # Task goes here
+# end

data/test/dummy/README.rdoc

@@ -0,0 +1,261 @@
+== Welcome to Rails
+
+Rails is a web-application framework that includes everything needed to create
+database-backed web applications according to the Model-View-Control pattern.
+
+This pattern splits the view (also called the presentation) into "dumb"
+templates that are primarily responsible for inserting pre-built data in between
+HTML tags. The model contains the "smart" domain objects (such as Account,
+Product, Person, Post) that holds all the business logic and knows how to
+persist themselves to a database. The controller handles the incoming requests
+(such as Save New Account, Update Product, Show Post) by manipulating the model
+and directing data to the view.
+
+In Rails, the model is handled by what's called an object-relational mapping
+layer entitled Active Record. This layer allows you to present the data from
+database rows as objects and embellish these data objects with business logic
+methods. You can read more about Active Record in
+link:files/vendor/rails/activerecord/README.html.
+
+The controller and view are handled by the Action Pack, which handles both
+layers by its two parts: Action View and Action Controller. These two layers
+are bundled in a single package due to their heavy interdependence. This is
+unlike the relationship between the Active Record and Action Pack that is much
+more separate. Each of these packages can be used independently outside of
+Rails. You can read more about Action Pack in
+link:files/vendor/rails/actionpack/README.html.
+
+
+== Getting Started
+
+1. At the command prompt, create a new Rails application:
+       <tt>rails new myapp</tt> (where <tt>myapp</tt> is the application name)
+
+2. Change directory to <tt>myapp</tt> and start the web server:
+       <tt>cd myapp; rails server</tt> (run with --help for options)
+
+3. Go to http://localhost:3000/ and you'll see:
+       "Welcome aboard: You're riding Ruby on Rails!"
+
+4. Follow the guidelines to start developing your application. You can find
+the following resources handy:
+
+* The Getting Started Guide: http://guides.rubyonrails.org/getting_started.html
+* Ruby on Rails Tutorial Book: http://www.railstutorial.org/
+
+
+== Debugging Rails
+
+Sometimes your application goes wrong. Fortunately there are a lot of tools that
+will help you debug it and get it back on the rails.
+
+First area to check is the application log files. Have "tail -f" commands
+running on the server.log and development.log. Rails will automatically display
+debugging and runtime information to these files. Debugging info will also be
+shown in the browser on requests from 127.0.0.1.
+
+You can also log your own messages directly into the log file from your code
+using the Ruby logger class from inside your controllers. Example:
+
+  class WeblogController < ActionController::Base
+    def destroy
+      @weblog = Weblog.find(params[:id])
+      @weblog.destroy
+      logger.info("#{Time.now} Destroyed Weblog ID ##{@weblog.id}!")
+    end
+  end
+
+The result will be a message in your log file along the lines of:
+
+  Mon Oct 08 14:22:29 +1000 2007 Destroyed Weblog ID #1!
+
+More information on how to use the logger is at http://www.ruby-doc.org/core/
+
+Also, Ruby documentation can be found at http://www.ruby-lang.org/. There are
+several books available online as well:
+
+* Programming Ruby: http://www.ruby-doc.org/docs/ProgrammingRuby/ (Pickaxe)
+* Learn to Program: http://pine.fm/LearnToProgram/ (a beginners guide)
+
+These two books will bring you up to speed on the Ruby language and also on
+programming in general.
+
+
+== Debugger
+
+Debugger support is available through the debugger command when you start your
+Mongrel or WEBrick server with --debugger. This means that you can break out of
+execution at any point in the code, investigate and change the model, and then,
+resume execution! You need to install ruby-debug to run the server in debugging
+mode. With gems, use <tt>sudo gem install ruby-debug</tt>. Example:
+
+  class WeblogController < ActionController::Base
+    def index
+      @posts = Post.all
+      debugger
+    end
+  end
+
+So the controller will accept the action, run the first line, then present you
+with a IRB prompt in the server window. Here you can do things like:
+
+  >> @posts.inspect
+  => "[#<Post:0x14a6be8
+          @attributes={"title"=>nil, "body"=>nil, "id"=>"1"}>,
+       #<Post:0x14a6620
+          @attributes={"title"=>"Rails", "body"=>"Only ten..", "id"=>"2"}>]"
+  >> @posts.first.title = "hello from a debugger"
+  => "hello from a debugger"
+
+...and even better, you can examine how your runtime objects actually work:
+
+  >> f = @posts.first
+  => #<Post:0x13630c4 @attributes={"title"=>nil, "body"=>nil, "id"=>"1"}>
+  >> f.
+  Display all 152 possibilities? (y or n)
+
+Finally, when you're ready to resume execution, you can enter "cont".
+
+
+== Console
+
+The console is a Ruby shell, which allows you to interact with your
+application's domain model. Here you'll have all parts of the application
+configured, just like it is when the application is running. You can inspect
+domain models, change values, and save to the database. Starting the script
+without arguments will launch it in the development environment.
+
+To start the console, run <tt>rails console</tt> from the application
+directory.
+
+Options:
+
+* Passing the <tt>-s, --sandbox</tt> argument will rollback any modifications
+  made to the database.
+* Passing an environment name as an argument will load the corresponding
+  environment. Example: <tt>rails console production</tt>.
+
+To reload your controllers and models after launching the console run
+<tt>reload!</tt>
+
+More information about irb can be found at:
+link:http://www.rubycentral.org/pickaxe/irb.html
+
+
+== dbconsole
+
+You can go to the command line of your database directly through <tt>rails
+dbconsole</tt>. You would be connected to the database with the credentials
+defined in database.yml. Starting the script without arguments will connect you
+to the development database. Passing an argument will connect you to a different
+database, like <tt>rails dbconsole production</tt>. Currently works for MySQL,
+PostgreSQL and SQLite 3.
+
+== Description of Contents
+
+The default directory structure of a generated Ruby on Rails application:
+
+  |-- app
+  |   |-- assets
+  |       |-- images
+  |       |-- javascripts
+  |       `-- stylesheets
+  |   |-- controllers
+  |   |-- helpers
+  |   |-- mailers
+  |   |-- models
+  |   `-- views
+  |       `-- layouts
+  |-- config
+  |   |-- environments
+  |   |-- initializers
+  |   `-- locales
+  |-- db
+  |-- doc
+  |-- lib
+  |   `-- tasks
+  |-- log
+  |-- public
+  |-- script
+  |-- test
+  |   |-- fixtures
+  |   |-- functional
+  |   |-- integration
+  |   |-- performance
+  |   `-- unit
+  |-- tmp
+  |   |-- cache
+  |   |-- pids
+  |   |-- sessions
+  |   `-- sockets
+  `-- vendor
+      |-- assets
+          `-- stylesheets
+      `-- plugins
+
+app
+  Holds all the code that's specific to this particular application.
+
+app/assets
+  Contains subdirectories for images, stylesheets, and JavaScript files.
+
+app/controllers
+  Holds controllers that should be named like weblogs_controller.rb for
+  automated URL mapping. All controllers should descend from
+  ApplicationController which itself descends from ActionController::Base.
+
+app/models
+  Holds models that should be named like post.rb. Models descend from
+  ActiveRecord::Base by default.
+
+app/views
+  Holds the template files for the view that should be named like
+  weblogs/index.html.erb for the WeblogsController#index action. All views use
+  eRuby syntax by default.
+
+app/views/layouts
+  Holds the template files for layouts to be used with views. This models the
+  common header/footer method of wrapping views. In your views, define a layout
+  using the <tt>layout :default</tt> and create a file named default.html.erb.
+  Inside default.html.erb, call <% yield %> to render the view using this
+  layout.
+
+app/helpers
+  Holds view helpers that should be named like weblogs_helper.rb. These are
+  generated for you automatically when using generators for controllers.
+  Helpers can be used to wrap functionality for your views into methods.
+
+config
+  Configuration files for the Rails environment, the routing map, the database,
+  and other dependencies.
+
+db
+  Contains the database schema in schema.rb. db/migrate contains all the
+  sequence of Migrations for your schema.
+
+doc
+  This directory is where your application documentation will be stored when
+  generated using <tt>rake doc:app</tt>
+
+lib
+  Application specific libraries. Basically, any kind of custom code that
+  doesn't belong under controllers, models, or helpers. This directory is in
+  the load path.
+
+public
+  The directory available for the web server. Also contains the dispatchers and the
+  default HTML files. This should be set as the DOCUMENT_ROOT of your web
+  server.
+
+script
+  Helper scripts for automation and generation.
+
+test
+  Unit and functional tests along with fixtures. When using the rails generate
+  command, template test files will be generated for you and placed in this
+  directory.
+
+vendor
+  External libraries that the application depends on. Also includes the plugins
+  subdirectory. If the app has frozen rails, those gems also go here, under
+  vendor/rails/. This directory is in the load path.

data/test/dummy/Rakefile

@@ -0,0 +1,7 @@
+#!/usr/bin/env rake
+# Add your own tasks in files placed in lib/tasks ending in .rake,
+# for example lib/tasks/capistrano.rake, and they will automatically be available to Rake.
+
+require File.expand_path('../config/application', __FILE__)
+
+Dummy::Application.load_tasks

data/test/dummy/app/assets/javascripts/application.js

@@ -0,0 +1,15 @@
+// This is a manifest file that'll be compiled into application.js, which will include all the files
+// listed below.
+//
+// Any JavaScript/Coffee file within this directory, lib/assets/javascripts, vendor/assets/javascripts,
+// or vendor/assets/javascripts of plugins, if any, can be referenced here using a relative path.
+//
+// It's not advisable to add code directly here, but if you do, it'll appear at the bottom of the
+// the compiled file.
+//
+// WARNING: THE FIRST BLANK LINE MARKS THE END OF WHAT'S TO BE PROCESSED, ANY BLANK LINE SHOULD
+// GO AFTER THE REQUIRES BELOW.
+//
+//= require jquery
+//= require jquery_ujs
+//= require_tree .

data/test/dummy/app/assets/stylesheets/application.css

@@ -0,0 +1,13 @@
+/*
+ * This is a manifest file that'll be compiled into application.css, which will include all the files
+ * listed below.
+ *
+ * Any CSS and SCSS file within this directory, lib/assets/stylesheets, vendor/assets/stylesheets,
+ * or vendor/assets/stylesheets of plugins, if any, can be referenced here using a relative path.
+ *
+ * You're free to add application-wide styles to this file and they'll appear at the top of the
+ * compiled file, but it's generally better to create a new file per style scope.
+ *
+ *= require_self
+ *= require_tree .
+*/

data/test/dummy/app/controllers/application_controller.rb

@@ -0,0 +1,3 @@
+class ApplicationController < ActionController::Base
+  protect_from_forgery
+end

data/test/dummy/app/helpers/application_helper.rb

@@ -0,0 +1,2 @@
+module ApplicationHelper
+end

data/test/dummy/app/views/layouts/application.html.erb

@@ -0,0 +1,14 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>Dummy</title>
+  <%= stylesheet_link_tag    "application", :media => "all" %>
+  <%= javascript_include_tag "application" %>
+  <%= csrf_meta_tags %>
+</head>
+<body>
+
+<%= yield %>
+
+</body>
+</html>