glyph_imager 0.0.14 → 0.1.0

data/vendor/ttf-ruby-0.1/lib/ttf/table/cvt.rb

@@ -1,49 +0,0 @@
-# TTF/Ruby, a library to read and write TrueType fonts in Ruby.
-# Copyright (C) 2006  Mathieu Blondel
-# 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-
-module TTFFont
-module TTF
-module Table
-
-# Cvt is the Control Value table. It references values that can be
-# referenced by instructions (used for hinting, aka grid-fitting).
-class Cvt < TTFFont::TTF::FontChunk
-
-    attr_accessor :instructions
-
-    def initialize(*args)
-        super(*args)
-
-        if exists_in_file?
-            @font.at_offset(@offset) do
-                n = @len / IO::SIZEOF_FWORD
-                @instructions = @font.read_fwords(n)
-            end
-        end
-    end
-
-    # Dumps the cvt table in binary raw format as may be found in a font
-    # file.
-    def dump
-        (@instructions || []).to_fwords
-    end
-    
-end
-
-end
-end
-end

data/vendor/ttf-ruby-0.1/lib/ttf/table/fpgm.rb

@@ -1,48 +0,0 @@
-# TTF/Ruby, a library to read and write TrueType fonts in Ruby.
-# Copyright (C) 2006  Mathieu Blondel
-# 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-
-module TTFFont
-module TTF
-module Table
-
-# Fpgm is the Font Program table. It is similar to the Cvt table except
-# it is only run once, when the font is first used.
-class Fpgm < TTFFont::TTF::FontChunk
-
-    attr_accessor :instructions
-
-    def initialize(*args)
-        super(*args)
-
-        if exists_in_file?
-            @font.at_offset(@offset) do
-                @instructions = @font.read_bytes(@len)
-            end
-        end
-    end
-
-    # Dumps the fpgm table in binary raw format as may be found in a font
-    # file.
-    def dump
-        (@instructions || []).to_bytes
-    end
-    
-end
-
-end
-end
-end

data/vendor/ttf-ruby-0.1/lib/ttf/table/gasp.rb

@@ -1,88 +0,0 @@
-# TTF/Ruby, a library to read and write TrueType fonts in Ruby.
-# Copyright (C) 2006  Mathieu Blondel
-# 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-
-module TTFFont
-module TTF
-module Table
-
-# Gasp is the Grid-fitting and scan conversion procedure table.
-class Gasp < TTFFont::TTF::FontChunk
-
-    class GaspRange < TTFFont::TTF::FontChunk
-
-        SIZEOF_GASP_RANGE = 2 * IO::SIZEOF_USHORT
-
-        attr_accessor :range_max_ppem, :range_gasp_behavior
-
-        def initialize(table, n=nil)
-            if n.nil?
-                # when object is created by hand
-                super(table.font)
-            else
-                offs = table.offset + 2 * IO::SIZEOF_USHORT + \
-                       n * SIZEOF_GASP_RANGE
-                super(table.font, offs, SIZEOF_GASP_RANGE)
-
-                table.font.at_offset(@offset) do
-                    @range_max_ppem = table.font.read_ushort
-                    @range_gasp_behavior = table.font.read_ushort
-                end
-            end
-        end
-
-        def dump
-            raw = (@range_max_ppem || 0).to_ushort
-            raw += (@range_gasp_behavior || 0).to_ushort
-        end
-
-    end
-
-    attr_accessor :version
-    # An Array of GaspRange objects.
-    attr_accessor :gasp_ranges
-
-    def initialize(*args)
-        super(*args)
-
-        if exists_in_file?
-            @font.at_offset(@offset) do
-                @version = @font.read_ushort
-                @num_ranges = @font.read_ushort
-                @gasp_ranges = []
-                @num_ranges.times do |i|
-                    @gasp_ranges << GaspRange.new(self, i)
-                end
-            end
-        end
-    end
-
-    # Dumps the gasp table in binary raw format as may be found in a font
-    # file.
-    def dump
-        raw = (@version || 0).to_ushort
-        raw += (@gasp_ranges || []).length.to_ushort
-        @gasp_ranges.each do |gr|
-            raw += gr.dump
-        end
-        raw
-    end
-    
-end
-
-end
-end
-end

data/vendor/ttf-ruby-0.1/lib/ttf/table/glyf.rb

@@ -1,452 +0,0 @@
-# TTF/Ruby, a library to read and write TrueType fonts in Ruby.
-# Copyright (C) 2006  Mathieu Blondel
-# 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-
-module TTFFont
-module TTF
-module Table
-
-# Glyf is the Glyph data table.
-class Glyf < TTFFont::TTF::FontChunk
-
-    # Base class for SimpleGlyph and CompositeGlyph.
-    class Glyph < TTFFont::TTF::FontChunk
-
-        attr_accessor :num_contours, :x_min, :y_min, :x_max, :y_max
-
-        def initialize(table, offset=nil)
-            @table = table
-            @offset_from_table = offset
-            super(@table.font, @table.offset + @offset_from_table)
-
-            if exists_in_file?
-                @font.at_offset(@offset) do
-                    @num_contours = @font.read_short
-                    @x_min = @font.read_fword
-                    @y_min = @font.read_fword
-                    @x_max = @font.read_fword
-                    @y_max = @font.read_fword
-                end
-            end
-        end
-
-        def dump
-            raw = (@num_contours || 0).to_short
-            raw += (@x_min || 0).to_fword
-            raw += (@y_min || 0).to_fword
-            raw += (@x_max || 0).to_fword
-            raw += (@y_max || 0).to_fword 
-        end
-
-        # Returns whether the glyph is composite or not.
-        def composite?
-            self.class == CompositeGlyph
-        end
-
-        # Returns whether is simple (i.e. not composite) or not.
-        def simple?
-            self.class == SimpleGlyph
-        end
-
-    end
-
-    # SimpleGlyph class.
-    class SimpleGlyph < Glyph
-
-        Point = Struct.new(:rel_x, :abs_x, :rel_y, :abs_y, 
-                          :end_of_contour, :on_curve)
-
-        # Point is helper class which gives information on a point
-        # such as it absolute (abs_x, abs_y) and relative (rel_x, rel_y)
-        # coordinates
-        class Point
-            # Whether the point is end of contour or not.
-            alias :end_of_contour? :end_of_contour
-            # Whether the point is on curve or not.
-            alias :on_curve? :on_curve
-
-            # Whether the point is off curve or not.
-            def off_curve?
-                not on_curve?
-            end
-        end
-
-        FLAG_ON_CURVE = 0b1
-        FLAG_X_SHORT_VECTOR = 0b10
-        FLAG_Y_SHORT_VECTOR = 0b100
-        FLAG_REPEAT = 0b1000
-        FLAG_X_IS_SAME = 0b10000
-        FLAG_Y_IS_SAME = 0b100000
-
-        attr_accessor :end_pts_of_contours, :instructions, :flags,
-                      :x_coordinates, :y_coordinates
-
-        def initialize(*args)
-            super(*args)
-            
-            if exists_in_file?
-                offs = @offset + IO::SIZEOF_SHORT + 4 * IO::SIZEOF_FWORD
-                @font.at_offset(offs) do
-                    @end_pts_of_contours = @font.read_ushorts(@num_contours)
-                    instruction_len = @font.read_ushort
-                    @instructions = @font.read_bytes(instruction_len)
-                    unless @end_pts_of_contours.empty?
-                        num_points = @end_pts_of_contours.last + 1
-                    else
-                        num_points = 0
-                    end
-                    @flags = []
-                    while @flags.length < num_points
-                        flag = @font.read_byte
-                        @flags << flag
-                        if flag & FLAG_REPEAT != 0
-                            @font.read_byte.times do
-                                @flags << flag
-                            end
-                        end
-                    end
-                    @x_coordinates = []
-                    @y_coordinates = []
-                    [[@x_coordinates, FLAG_X_SHORT_VECTOR, FLAG_X_IS_SAME],
-                     [@y_coordinates, FLAG_Y_SHORT_VECTOR, FLAG_Y_IS_SAME]
-                    ].each do |coordinates, short, same|
-                        num_points.times do |i|
-                            flag = @flags[i]
-                            if flag & short != 0
-                                # if the coordinate is a BYTE
-                                if flag & same != 0
-                                    coordinates << @font.read_byte
-                                else
-                                    coordinates << -@font.read_byte
-                                end
-                            else
-                                # the coordinate is a SHORT
-                                if flag & same != 0
-                                    # same so 0 (relative coordinates)
-                                    coordinates << 0
-                                else
-                                    coordinates << @font.read_short
-                                end
-                            end
-                        end
-                    end
-                    @len = @font.pos - @offset
-                end
-            end
-
-        end
-        
-        # Returns an Array of [x,y] pairs of relative coordinates.
-        def rel_coordinates
-            coords = []
-            @x_coordinates.length.times do |i|
-                coords << [@x_coordinates[i], @y_coordinates[i]]
-            end
-            coords
-        end
-
-        # Returns an Array of [x,y] pairs of absolute coordinates.
-        def abs_coordinates
-            abs_x = 0
-            abs_y = 0
-            coords = []
-            rel_coordinates.each do |rel_x, rel_y|
-                abs_x += rel_x
-                abs_y += rel_y
-                coords << [abs_x, abs_y]
-            end
-            coords
-        end
-
-        # Returns an Array of Point objects.
-        def points
-            x_abs = 0
-            y_abs = 0
-            pnts = []
-            @x_coordinates.length.times do |i|
-                pnt = Point.new
-                pnt.rel_x = @x_coordinates[i]
-                pnt.rel_y = @y_coordinates[i]
-                x_abs += pnt.rel_x
-                y_abs += pnt.rel_y
-                pnt.abs_x = x_abs
-                pnt.abs_y = y_abs
-                pnt.end_of_contour = @end_pts_of_contours.include? i
-                pnt.on_curve = (@flags[i] & FLAG_ON_CURVE != 0)
-                pnts << pnt
-            end
-            pnts
-        end
-
-        def dump
-            raw = super
-            raw += @end_pts_of_contours.to_ushorts
-            raw += @instructions.length.to_ushort
-            raw += @instructions.to_bytes
-
-            tmp = ""
-            [[@x_coordinates, FLAG_X_SHORT_VECTOR, FLAG_X_IS_SAME],
-                [@y_coordinates, FLAG_Y_SHORT_VECTOR, FLAG_Y_IS_SAME]
-            ].each do |coordinates, short, same|
-                coordinates.each_with_index do |coord, i|
-                    if 0 <= coord and coord <= 255
-                        @flags[i] = (@flags[i] | short) | same
-                        tmp += coord.to_byte
-                    elsif -255 <= coord and coord < 0
-                        @flags[i] = (@flags[i] | short) & ~same
-                        tmp += (-coord).to_byte
-                    elsif coord == 0
-                        @flags[i] = (@flags[i] & ~short) | same
-                    else
-                        @flags[i] = (@flags[i] & ~short) & ~same
-                        tmp += coord.to_short
-                    end
-                end
-            end
-
-            # We write all flags rather than using the flag_repeat trick
-            # So we unset the "repeat" bit for all flags
-            # TODO: implement the repeat feature (this saves space)
-            raw += @flags.collect { |f| f & ~FLAG_REPEAT }.to_bytes
-
-            raw += tmp
-        end
-    end
-
-    # CompositeGlyph class.
-    class CompositeGlyph < Glyph
-
-        GlyphComponent = Struct.new(:flags, :index, :args, :scale,
-                                    :xscale, :yscale, :scale01, :scale10)
-
-        ARG_1_AND_2_ARE_WORDS = 0b1
-        ARGS_ARE_XY_VALUES = 0b10
-        ROUND_XY_TO_GRID = 0b100
-        WE_HAVE_A_SCALE = 0b1000
-        RESERVED = 0b10000
-        MORE_COMPONENTS = 0b100000
-        WE_HAVE_AN_X_AND_Y_SCALE = 0b1000000
-        WE_HAVE_A_TWO_BY_TWO = 0b10000000
-        WE_HAVE_INSTRUCTIONS = 0b100000000
-        USE_MY_METRICS = 0b1000000000
-
-        # An Array of GlyphComponent objects
-        attr_accessor :components
-        # An Array of instructions (Fixnums)
-        attr_accessor :instructions
-
-        def initialize(*args)
-            super(*args)
-            
-            if exists_in_file?
-                offs = @offset + IO::SIZEOF_SHORT + 4 * IO::SIZEOF_FWORD
-                @font.at_offset(offs) do
-                    @components = []
-                    continue = true
-                    while continue
-                        gc = GlyphComponent.new
-                        gc.flags = @font.read_ushort
-                        gc.index = @font.read_ushort
-    
-                        gc.args = []
-                        if gc.flags & ARG_1_AND_2_ARE_WORDS != 0
-                            gc.args[0] = @font.read_short
-                            gc.args[1] = @font.read_short
-                        else
-                            gc.args[0] = @font.read_ushort
-                        end
-    
-                        if gc.flags & WE_HAVE_A_SCALE != 0
-                            gc.scale = @font.read_f2dot14
-                        elsif gc.flags & WE_HAVE_AN_X_AND_Y_SCALE != 0
-                            gc.xscale = @font.read_f2dot14
-                            gc.yscale = @font.read_f2dot14
-                        elsif gc.flags & WE_HAVE_A_TWO_BY_TWO != 0
-                            gc.xscale  = @font.read_f2dot14
-                            gc.scale01 = @font.read_f2dot14
-                            gc.scale10 = @font.read_f2dot14
-                            gc.yscale = @font.read_f2dot14
-                        end
-                        @components << gc
-                        continue = (gc.flags & MORE_COMPONENTS != 0)
-                    end
-
-                    if @components.last.flags & \
-                       WE_HAVE_INSTRUCTIONS != 0
-                        inst_len = @font.read_ushort
-                        @instructions = @font.read_bytes(inst_len)
-                    else
-                        @instructions = []
-                    end
-
-                    @len = @font.pos - @offset
-                end
-            end
-        end
-
-        def dump
-            raw = super
-            components_len = @components.length
-            @components.each_with_index do |gc, i|
-                flags = gc.flags
-                tmp = ""
-                if not gc.args.nil? and gc.args.length == 2
-                    flags |= ARG_1_AND_2_ARE_WORDS 
-                    tmp += gc.args[0].to_short
-                    tmp += gc.args[1].to_short
-                else
-                    flags &= ~ARG_1_AND_2_ARE_WORDS
-                    tmp += gc.args[0].to_ushort
-                end
-                if not gc.scale.nil?
-                    flags |= WE_HAVE_A_SCALE
-                    tmp += gc.scale.to_f2dot14
-                elsif not gc.scale01.nil?
-                    flags |= WE_HAVE_A_TWO_BY_TWO
-                    tmp += gc.xscale.to_f2dot14
-                    tmp += gc.scale01.to_f2dot14
-                    tmp += gc.scale10.to_f2dot14
-                    tmp += gc.yscale.to_f2dot14
-                elsif not gc.xscale.nil?
-                    flags |= WE_HAVE_AN_X_AND_Y_SCALE
-                    tmp += gc.xscale.to_f2dot14
-                    tmp += gc.yscale.to_f2dot14
-                end
-
-                if i < components_len - 1
-                    flags |= MORE_COMPONENTS
-                else
-                    flags &= ~MORE_COMPONENTS
-                    if @instructions.length > 0
-                        flags |= WE_HAVE_INSTRUCTIONS
-                    else
-                        flags &= ~WE_HAVE_INSTRUCTIONS
-                    end
-                end
-                raw += flags.to_ushort
-                raw += gc.index.to_ushort
-                raw += tmp
-            end
-            unless @instructions.empty?
-                raw += @instructions.length.to_ushort
-                raw += @instructions.to_bytes
-            end
-            raw
-        end
-    end
-
-    attr_accessor :glyphs
-
-    def initialize(*args)
-        super(*args)
-    end
-
-    # Returns the kind of glyph at offset, i.e. either SimpleGlyph
-    # or CompositeGlyph.
-    def kind_of_glyph_at_offset(offs_from_table)
-        @font.at_offset(@offset + offs_from_table) do
-            num_contours = @font.read_short
-            if num_contours >= 0
-                SimpleGlyph
-            else
-                CompositeGlyph
-            end
-        end
-    end
-
-    def get_glyph_at_offset(offs_from_table)
-        klass = kind_of_glyph_at_offset(offs_from_table)
-        klass.new(self, offs_from_table)
-    end
-
-    def get_glyphs
-        loca = @font.get_table(:loca)
-        glyphs = []
-        loca.glyph_offsets[0...-1].each do |off|
-            glyphs << get_glyph_at_offset(off)
-        end
-        glyphs
-    end
-    private :get_glyphs
-
-    # Returns all Glyph (SimpleGlyph or CompositeGlyph) in an Array.
-    # This method may be real overkill if you just need to access a few glyphs.
-    # In this case, you should use the loca table (TTFFont::TTF::Table::Loca)
-    # to get offsets and get_glyph_at_offset to get glyph associated with them.
-    def glyphs
-        @glyphs ||= get_glyphs
-    end
-
-    # Sets glyphs. new_glyphs is an Array of Glyph objects.
-    def glyphs=(new_glyphs)
-        @glyphs = new_glyphs
-        @font.get_table(:maxp).num_glyphs = @glyphs.length
-        @font.get_table(:post).num_glyphs = @glyphs.length
-    end
-
-    # Iterates over each glyph.
-    # It does not load all glyphs like glyphs.each would do.
-    def each_glyph
-        loca = @font.get_table(:loca)
-        glyphs = []
-        loca.glyph_offsets[0...-1].each do |off|
-            glyph = get_glyph_at_offset(off)
-            yield glyph
-        end
-    end
-
-    # Dumps the glyf table in binary raw format as may be found in a font
-    # file.
-    def dump
-        raw = ""
-        offs = 0
-        glyph_offsets = []
-        glyphs.each do |glyph|            
-            glyph_offsets << offs
-            dump = glyph.dump
-            len = dump.length
-            raw += dump
-            # offsets should be multiples of SIZEOF_ULONG
-            diff = len % IO::SIZEOF_ULONG
-            raw += " " * diff
-            offs += len + diff
-        end
-        # An additional offset is added so that the length of the last
-        # glyph can be calculated: 
-        # len of last glyph = additional offs - last glyph offs
-        glyph_offsets << offs        
-
-        # 2 ** 16 * 2 = 131072 is the maximum size supported
-        # if the short format is used in the loca table
-        # Using shorts saves two bytes per glyph!
-        if offs < 131072
-            @font.get_table(:head).index_to_loc_format = \
-                TTFFont::TTF::Table::Head::SHORT_FORMAT
-        else
-            @font.get_table(:head).index_to_loc_format = \
-                TTFFont::TTF::Table::Head::LONG_FORMAT
-        end
-
-        @font.get_table(:loca).glyph_offsets = glyph_offsets
-
-        raw
-    end
-   
-end
-
-end
-end
-end