glib2 3.1.0-x64-mingw32 → 3.1.1-x64-mingw32

data/vendor/local/share/license/pcre/AUTHORS

@@ -8,7 +8,7 @@ Email domain:     cam.ac.uk
 University of Cambridge Computing Service,
 Cambridge, England.
 
-Copyright (c) 1997-2015 University of Cambridge
+Copyright (c) 1997-2017 University of Cambridge
 All rights reserved
 
 
@@ -19,7 +19,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2010-2015 Zoltan Herczeg
+Copyright(c) 2010-2017 Zoltan Herczeg
 All rights reserved.
 
 
@@ -30,7 +30,7 @@ Written by:       Zoltan Herczeg
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2009-2015 Zoltan Herczeg
+Copyright(c) 2009-2017 Zoltan Herczeg
 All rights reserved.
 
 

data/vendor/local/share/man/man3/pcreapi.3

@@ -1,4 +1,4 @@
-.TH PCREAPI 3 "09 February 2014" "PCRE 8.35"
+.TH PCREAPI 3 "18 December 2015" "PCRE 8.39"
 .SH NAME
 PCRE - Perl-compatible regular expressions
 .sp
@@ -273,9 +273,8 @@ documentation for details of how to do this. It is a non-standard way of
 building PCRE, for use in environments that have limited stacks. Because of the
 greater use of memory management, it runs more slowly. Separate functions are
 provided so that special-purpose external code can be used for this case. When
-used, these functions are always called in a stack-like manner (last obtained,
-first freed), and always for memory blocks of the same size. There is a
-discussion about PCRE's stack usage in the
+used, these functions always allocate memory blocks of the same size. There is
+a discussion about PCRE's stack usage in the
 .\" HREF
 \fBpcrestack\fP
 .\"
@@ -2914,6 +2913,6 @@ Cambridge CB2 3QH, England.
 .rs
 .sp
 .nf
-Last updated: 09 February 2014
-Copyright (c) 1997-2014 University of Cambridge.
+Last updated: 18 December 2015
+Copyright (c) 1997-2015 University of Cambridge.
 .fi

data/vendor/local/share/man/man3/pcrecompat.3

@@ -113,7 +113,7 @@ the pattern /^(a(b)?)+$/ in Perl leaves $2 unset, but in PCRE it is set to "b".
 14. PCRE's handling of duplicate subpattern numbers and duplicate subpattern
 names is not as general as Perl's. This is a consequence of the fact the PCRE
 works internally just with numbers, using an external table to translate
-between numbers and names. In particular, a pattern such as (?|(?<a>A)|(?<b)B),
+between numbers and names. In particular, a pattern such as (?|(?<a>A)|(?<b>B),
 where the two capturing parentheses have the same number but different names,
 is not supported, and causes an error at compile time. If it were allowed, it
 would not be possible to distinguish which parentheses matched, because both

data/vendor/local/share/man/man3/pcrepattern.3

@@ -1,4 +1,4 @@
-.TH PCREPATTERN 3 "14 June 2015" "PCRE 8.38"
+.TH PCREPATTERN 3 "23 October 2016" "PCRE 8.40"
 .SH NAME
 PCRE - Perl-compatible regular expressions
 .SH "PCRE REGULAR EXPRESSION DETAILS"
@@ -336,22 +336,22 @@ When PCRE is compiled in EBCDIC mode, \ea, \ee, \ef, \en, \er, and \et
 generate the appropriate EBCDIC code values. The \ec escape is processed
 as specified for Perl in the \fBperlebcdic\fP document. The only characters
 that are allowed after \ec are A-Z, a-z, or one of @, [, \e, ], ^, _, or ?. Any
-other character provokes a compile-time error. The sequence \e@ encodes
-character code 0; the letters (in either case) encode characters 1-26 (hex 01
-to hex 1A); [, \e, ], ^, and _ encode characters 27-31 (hex 1B to hex 1F), and
-\e? becomes either 255 (hex FF) or 95 (hex 5F).
+other character provokes a compile-time error. The sequence \ec@ encodes
+character code 0; after \ec the letters (in either case) encode characters 1-26
+(hex 01 to hex 1A); [, \e, ], ^, and _ encode characters 27-31 (hex 1B to hex
+1F), and \ec? becomes either 255 (hex FF) or 95 (hex 5F).
 .P
-Thus, apart from \e?, these escapes generate the same character code values as
+Thus, apart from \ec?, these escapes generate the same character code values as
 they do in an ASCII environment, though the meanings of the values mostly
-differ. For example, \eG always generates code value 7, which is BEL in ASCII
+differ. For example, \ecG always generates code value 7, which is BEL in ASCII
 but DEL in EBCDIC.
 .P
-The sequence \e? generates DEL (127, hex 7F) in an ASCII environment, but
+The sequence \ec? generates DEL (127, hex 7F) in an ASCII environment, but
 because 127 is not a control character in EBCDIC, Perl makes it generate the
 APC character. Unfortunately, there are several variants of EBCDIC. In most of
 them the APC character has the value 255 (hex FF), but in the one Perl calls
 POSIX-BC its value is 95 (hex 5F). If certain other characters have POSIX-BC
-values, PCRE makes \e? generate 95; otherwise it generates 255.
+values, PCRE makes \ec? generate 95; otherwise it generates 255.
 .P
 After \e0 up to two further octal digits are read. If there are fewer than two
 digits, just those that are present are used. Thus the sequence \e0\ex\e015
@@ -1511,12 +1511,8 @@ J, U and X respectively.
 .P
 When one of these option changes occurs at top level (that is, not inside
 subpattern parentheses), the change applies to the remainder of the pattern
-that follows. If the change is placed right at the start of a pattern, PCRE
-extracts it into the global options (and it will therefore show up in data
-extracted by the \fBpcre_fullinfo()\fP function).
-.P
-An option change within a subpattern (see below for a description of
-subpatterns) affects only that part of the subpattern that follows it, so
+that follows. An option change within a subpattern (see below for a description
+of subpatterns) affects only that part of the subpattern that follows it, so
 .sp
   (a(?i)b)c
 .sp
@@ -2171,6 +2167,13 @@ numbering the capturing subpatterns in the whole pattern. However, substring
 capturing is carried out only for positive assertions. (Perl sometimes, but not
 always, does do capturing in negative assertions.)
 .P
+WARNING: If a positive assertion containing one or more capturing subpatterns
+succeeds, but failure to match later in the pattern causes backtracking over
+this assertion, the captures within the assertion are reset only if no higher
+numbered captures are already set. This is, unfortunately, a fundamental
+limitation of the current implementation, and as PCRE1 is now in
+maintenance-only status, it is unlikely ever to change.
+.P
 For compatibility with Perl, assertion subpatterns may be repeated; though
 it makes no sense to assert the same thing several times, the side effect of
 capturing parentheses may occasionally be useful. In practice, there only three
@@ -3296,6 +3299,6 @@ Cambridge CB2 3QH, England.
 .rs
 .sp
 .nf
-Last updated: 14 June 2015
-Copyright (c) 1997-2015 University of Cambridge.
+Last updated: 23 October 2016
+Copyright (c) 1997-2016 University of Cambridge.
 .fi

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: glib2
 version: !ruby/object:Gem::Version
-  version: 3.1.0
+  version: 3.1.1
 platform: x64-mingw32
 authors:
 - The Ruby-GNOME2 Project Team
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2016-11-13 00:00:00.000000000 Z
+date: 2017-01-26 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: pkg-config
@@ -70,6 +70,7 @@ files:
 - ext/glib2/rbglib2conversions.h
 - ext/glib2/rbglib_bookmarkfile.c
 - ext/glib2/rbglib_convert.c
+- ext/glib2/rbglib_datetime.c
 - ext/glib2/rbglib_error.c
 - ext/glib2/rbglib_fileutils.c
 - ext/glib2/rbglib_gettext.c
@@ -93,6 +94,7 @@ files:
 - ext/glib2/rbglib_spawnerror.c
 - ext/glib2/rbglib_threads.c
 - ext/glib2/rbglib_timer.c
+- ext/glib2/rbglib_timezone.c
 - ext/glib2/rbglib_ucs4.c
 - ext/glib2/rbglib_unichar.c
 - ext/glib2/rbglib_unicode.c
@@ -135,6 +137,7 @@ files:
 - extconf.rb
 - lib/2.2/glib2.so
 - lib/2.3/glib2.so
+- lib/2.4/glib2.so
 - lib/glib-mkenums.rb
 - lib/glib2.rb
 - lib/glib2/deprecatable.rb
@@ -165,8 +168,10 @@ files:
 - test/glib-test-utils.rb
 - test/run-test.rb
 - test/test-binding.rb
+- test/test-date-time.rb
 - test/test-match-info.rb
 - test/test-regex.rb
+- test/test-time-zone.rb
 - test/test-variant-type.rb
 - test/test-version.rb
 - test/test_enum.rb
@@ -1845,7 +1850,10 @@ required_ruby_version: !ruby/object:Gem::Requirement
   requirements:
   - - ">="
     - !ruby/object:Gem::Version
-      version: 2.1.0
+      version: '2.1'
+  - - "<"
+    - !ruby/object:Gem::Version
+      version: '2.5'
 required_rubygems_version: !ruby/object:Gem::Requirement
   requirements:
   - - ">="