RubyGems - glib2 - Versions diffs - 3.0.7-x86-mingw32 → 3.0.8-x86-mingw32 - Mend

glib2 3.0.7-x86-mingw32 → 3.0.8-x86-mingw32

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.

Files changed (1058) hide show

data/vendor/local/share/doc/pcre/html/pcreunicode.html ADDED Viewed

@@ -0,0 +1,262 @@
+<html>
+<head>
+<title>pcreunicode specification</title>
+</head>
+<body bgcolor="#FFFFFF" text="#00005A" link="#0066FF" alink="#3399FF" vlink="#2222BB">
+<h1>pcreunicode man page</h1>
+<p>
+Return to the <a href="index.html">PCRE index page</a>.
+</p>
+<p>
+This page is part of the PCRE HTML documentation. It was generated automatically
+from the original man page. If there is any nonsense in it, please consult the
+man page, in case the conversion went wrong.
+<br>
+<br><b>
+UTF-8, UTF-16, UTF-32, AND UNICODE PROPERTY SUPPORT
+</b><br>
+<P>
+As well as UTF-8 support, PCRE also supports UTF-16 (from release 8.30) and
+UTF-32 (from release 8.32), by means of two additional libraries. They can be
+built as well as, or instead of, the 8-bit library.
+</P>
+<br><b>
+UTF-8 SUPPORT
+</b><br>
+<P>
+In order process UTF-8 strings, you must build PCRE's 8-bit library with UTF
+support, and, in addition, you must call
+<a href="pcre_compile.html"><b>pcre_compile()</b></a>
+with the PCRE_UTF8 option flag, or the pattern must start with the sequence
+(*UTF8) or (*UTF). When either of these is the case, both the pattern and any
+subject strings that are matched against it are treated as UTF-8 strings
+instead of strings of individual 1-byte characters.
+</P>
+<br><b>
+UTF-16 AND UTF-32 SUPPORT
+</b><br>
+<P>
+In order process UTF-16 or UTF-32 strings, you must build PCRE's 16-bit or
+32-bit library with UTF support, and, in addition, you must call
+<a href="pcre16_compile.html"><b>pcre16_compile()</b></a>
+or
+<a href="pcre32_compile.html"><b>pcre32_compile()</b></a>
+with the PCRE_UTF16 or PCRE_UTF32 option flag, as appropriate. Alternatively,
+the pattern must start with the sequence (*UTF16), (*UTF32), as appropriate, or
+(*UTF), which can be used with either library. When UTF mode is set, both the
+pattern and any subject strings that are matched against it are treated as
+UTF-16 or UTF-32 strings instead of strings of individual 16-bit or 32-bit
+characters.
+</P>
+<br><b>
+UTF SUPPORT OVERHEAD
+</b><br>
+<P>
+If you compile PCRE with UTF support, but do not use it at run time, the
+library will be a bit bigger, but the additional run time overhead is limited
+to testing the PCRE_UTF[8|16|32] flag occasionally, so should not be very big.
+</P>
+<br><b>
+UNICODE PROPERTY SUPPORT
+</b><br>
+<P>
+If PCRE is built with Unicode character property support (which implies UTF
+support), the escape sequences \p{..}, \P{..}, and \X can be used.
+The available properties that can be tested are limited to the general
+category properties such as Lu for an upper case letter or Nd for a decimal
+number, the Unicode script names such as Arabic or Han, and the derived
+properties Any and L&. Full lists is given in the
+<a href="pcrepattern.html"><b>pcrepattern</b></a>
+and
+<a href="pcresyntax.html"><b>pcresyntax</b></a>
+documentation. Only the short names for properties are supported. For example,
+\p{L} matches a letter. Its Perl synonym, \p{Letter}, is not supported.
+Furthermore, in Perl, many properties may optionally be prefixed by "Is", for
+compatibility with Perl 5.6. PCRE does not support this.
+<a name="utf8strings"></a></P>
+<br><b>
+Validity of UTF-8 strings
+</b><br>
+<P>
+When you set the PCRE_UTF8 flag, the byte strings passed as patterns and
+subjects are (by default) checked for validity on entry to the relevant
+functions. The entire string is checked before any other processing takes
+place. From release 7.3 of PCRE, the check is according the rules of RFC 3629,
+which are themselves derived from the Unicode specification. Earlier releases
+of PCRE followed the rules of RFC 2279, which allows the full range of 31-bit
+values (0 to 0x7FFFFFFF). The current check allows only values in the range U+0
+to U+10FFFF, excluding the surrogate area. (From release 8.33 the so-called
+"non-character" code points are no longer excluded because Unicode corrigendum
+#9 makes it clear that they should not be.)
+</P>
+<P>
+Characters in the "Surrogate Area" of Unicode are reserved for use by UTF-16,
+where they are used in pairs to encode codepoints with values greater than
+0xFFFF. The code points that are encoded by UTF-16 pairs are available
+independently in the UTF-8 and UTF-32 encodings. (In other words, the whole
+surrogate thing is a fudge for UTF-16 which unfortunately messes up UTF-8 and
+UTF-32.)
+</P>
+<P>
+If an invalid UTF-8 string is passed to PCRE, an error return is given. At
+compile time, the only additional information is the offset to the first byte
+of the failing character. The run-time functions <b>pcre_exec()</b> and
+<b>pcre_dfa_exec()</b> also pass back this information, as well as a more
+detailed reason code if the caller has provided memory in which to do this.
+</P>
+<P>
+In some situations, you may already know that your strings are valid, and
+therefore want to skip these checks in order to improve performance, for
+example in the case of a long subject string that is being scanned repeatedly.
+If you set the PCRE_NO_UTF8_CHECK flag at compile time or at run time, PCRE
+assumes that the pattern or subject it is given (respectively) contains only
+valid UTF-8 codes. In this case, it does not diagnose an invalid UTF-8 string.
+</P>
+<P>
+Note that passing PCRE_NO_UTF8_CHECK to <b>pcre_compile()</b> just disables the
+check for the pattern; it does not also apply to subject strings. If you want
+to disable the check for a subject string you must pass this option to
+<b>pcre_exec()</b> or <b>pcre_dfa_exec()</b>.
+</P>
+<P>
+If you pass an invalid UTF-8 string when PCRE_NO_UTF8_CHECK is set, the result
+is undefined and your program may crash.
+<a name="utf16strings"></a></P>
+<br><b>
+Validity of UTF-16 strings
+</b><br>
+<P>
+When you set the PCRE_UTF16 flag, the strings of 16-bit data units that are
+passed as patterns and subjects are (by default) checked for validity on entry
+to the relevant functions. Values other than those in the surrogate range
+U+D800 to U+DFFF are independent code points. Values in the surrogate range
+must be used in pairs in the correct manner.
+</P>
+<P>
+If an invalid UTF-16 string is passed to PCRE, an error return is given. At
+compile time, the only additional information is the offset to the first data
+unit of the failing character. The run-time functions <b>pcre16_exec()</b> and
+<b>pcre16_dfa_exec()</b> also pass back this information, as well as a more
+detailed reason code if the caller has provided memory in which to do this.
+</P>
+<P>
+In some situations, you may already know that your strings are valid, and
+therefore want to skip these checks in order to improve performance. If you set
+the PCRE_NO_UTF16_CHECK flag at compile time or at run time, PCRE assumes that
+the pattern or subject it is given (respectively) contains only valid UTF-16
+sequences. In this case, it does not diagnose an invalid UTF-16 string.
+However, if an invalid string is passed, the result is undefined.
+<a name="utf32strings"></a></P>
+<br><b>
+Validity of UTF-32 strings
+</b><br>
+<P>
+When you set the PCRE_UTF32 flag, the strings of 32-bit data units that are
+passed as patterns and subjects are (by default) checked for validity on entry
+to the relevant functions.  This check allows only values in the range U+0
+to U+10FFFF, excluding the surrogate area U+D800 to U+DFFF.
+</P>
+<P>
+If an invalid UTF-32 string is passed to PCRE, an error return is given. At
+compile time, the only additional information is the offset to the first data
+unit of the failing character. The run-time functions <b>pcre32_exec()</b> and
+<b>pcre32_dfa_exec()</b> also pass back this information, as well as a more
+detailed reason code if the caller has provided memory in which to do this.
+</P>
+<P>
+In some situations, you may already know that your strings are valid, and
+therefore want to skip these checks in order to improve performance. If you set
+the PCRE_NO_UTF32_CHECK flag at compile time or at run time, PCRE assumes that
+the pattern or subject it is given (respectively) contains only valid UTF-32
+sequences. In this case, it does not diagnose an invalid UTF-32 string.
+However, if an invalid string is passed, the result is undefined.
+</P>
+<br><b>
+General comments about UTF modes
+</b><br>
+<P>
+1. Codepoints less than 256 can be specified in patterns by either braced or
+unbraced hexadecimal escape sequences (for example, \x{b3} or \xb3). Larger
+values have to use braced sequences.
+</P>
+<P>
+2. Octal numbers up to \777 are recognized, and in UTF-8 mode they match
+two-byte characters for values greater than \177.
+</P>
+<P>
+3. Repeat quantifiers apply to complete UTF characters, not to individual
+data units, for example: \x{100}{3}.
+</P>
+<P>
+4. The dot metacharacter matches one UTF character instead of a single data
+unit.
+</P>
+<P>
+5. The escape sequence \C can be used to match a single byte in UTF-8 mode, or
+a single 16-bit data unit in UTF-16 mode, or a single 32-bit data unit in
+UTF-32 mode, but its use can lead to some strange effects because it breaks up
+multi-unit characters (see the description of \C in the
+<a href="pcrepattern.html"><b>pcrepattern</b></a>
+documentation). The use of \C is not supported in the alternative matching
+function <b>pcre[16|32]_dfa_exec()</b>, nor is it supported in UTF mode by the
+JIT optimization of <b>pcre[16|32]_exec()</b>. If JIT optimization is requested
+for a UTF pattern that contains \C, it will not succeed, and so the matching
+will be carried out by the normal interpretive function.
+</P>
+<P>
+6. The character escapes \b, \B, \d, \D, \s, \S, \w, and \W correctly
+test characters of any code value, but, by default, the characters that PCRE
+recognizes as digits, spaces, or word characters remain the same set as in
+non-UTF mode, all with values less than 256. This remains true even when PCRE
+is built to include Unicode property support, because to do otherwise would
+slow down PCRE in many common cases. Note in particular that this applies to
+\b and \B, because they are defined in terms of \w and \W. If you really
+want to test for a wider sense of, say, "digit", you can use explicit Unicode
+property tests such as \p{Nd}. Alternatively, if you set the PCRE_UCP option,
+the way that the character escapes work is changed so that Unicode properties
+are used to determine which characters match. There are more details in the
+section on
+<a href="pcrepattern.html#genericchartypes">generic character types</a>
+in the
+<a href="pcrepattern.html"><b>pcrepattern</b></a>
+documentation.
+</P>
+<P>
+7. Similarly, characters that match the POSIX named character classes are all
+low-valued characters, unless the PCRE_UCP option is set.
+</P>
+<P>
+8. However, the horizontal and vertical white space matching escapes (\h, \H,
+\v, and \V) do match all the appropriate Unicode characters, whether or not
+PCRE_UCP is set.
+</P>
+<P>
+9. Case-insensitive matching applies only to characters whose values are less
+than 128, unless PCRE is built with Unicode property support. A few Unicode
+characters such as Greek sigma have more than two codepoints that are
+case-equivalent. Up to and including PCRE release 8.31, only one-to-one case
+mappings were supported, but later releases (with Unicode property support) do
+treat as case-equivalent all versions of characters such as Greek sigma.
+</P>
+<br><b>
+AUTHOR
+</b><br>
+<P>
+Philip Hazel
+<br>
+University Computing Service
+<br>
+Cambridge CB2 3QH, England.
+<br>
+</P>
+<br><b>
+REVISION
+</b><br>
+<P>
+Last updated: 27 February 2013
+<br>
+Copyright &copy; 1997-2013 University of Cambridge.
+<br>
+<p>
+Return to the <a href="index.html">PCRE index page</a>.
+</p>

data/vendor/local/share/doc/pcre/pcre-config.txt ADDED Viewed

@@ -0,0 +1,86 @@
+PCRE-CONFIG(1)              General Commands Manual             PCRE-CONFIG(1)
+NAME
+       pcre-config - program to return PCRE configuration
+SYNOPSIS
+       pcre-config [--prefix] [--exec-prefix] [--version] [--libs]
+                   [--libs16] [--libs32] [--libs-cpp] [--libs-posix]
+                   [--cflags] [--cflags-posix]
+DESCRIPTION
+       pcre-config  returns  the configuration of the installed PCRE libraries
+       and the options required to compile a program to use them. Some of  the
+       options  apply  only  to  the  8-bit,  or  16-bit, or 32-bit libraries,
+       respectively, and are not available if only one of those libraries  has
+       been built. If an unavailable option is encountered, the "usage" infor-
+       mation is output.
+OPTIONS
+       --prefix  Writes the directory prefix used in the PCRE installation for
+                 architecture   independent   files  (/usr  on  many  systems,
+                 /usr/local on some systems) to the standard output.
+       --exec-prefix
+                 Writes the directory prefix used in the PCRE installation for
+                 architecture  dependent files (normally the same as --prefix)
+                 to the standard output.
+       --version Writes the version number of the installed PCRE libraries  to
+                 the standard output.
+       --libs    Writes  to  the  standard  output  the  command  line options
+                 required to link with the 8-bit PCRE library (-lpcre on  many
+                 systems).
+       --libs16  Writes  to  the  standard  output  the  command  line options
+                 required to link with the 16-bit PCRE  library  (-lpcre16  on
+                 many systems).
+       --libs32  Writes  to  the  standard  output  the  command  line options
+                 required to link with the 32-bit PCRE  library  (-lpcre32  on
+                 many systems).
+       --libs-cpp
+                 Writes  to  the  standard  output  the  command  line options
+                 required to link with PCRE's C++ wrapper  library  (-lpcrecpp
+                 -lpcre on many systems).
+       --libs-posix
+                 Writes  to  the  standard  output  the  command  line options
+                 required to  link  with  PCRE's  POSIX  API  wrapper  library
+                 (-lpcreposix -lpcre on many systems).
+       --cflags  Writes  to  the  standard  output  the  command  line options
+                 required to compile files that use  PCRE  (this  may  include
+                 some -I options, but is blank on many systems).
+       --cflags-posix
+                 Writes  to  the  standard  output  the  command  line options
+                 required to compile files that use PCRE's POSIX  API  wrapper
+                 library  (this  may  include some -I options, but is blank on
+                 many systems).
+SEE ALSO
+       pcre(3)
+AUTHOR
+       This manual page was originally written by Mark Baker  for  the  Debian
+       GNU/Linux  system.  It  has been subsequently revised as a generic PCRE
+       man page.
+REVISION
+       Last updated: 24 June 2012