git-scribe 0.0.3 → 0.0.4

data/docbook-xsl/manpages/other.xsl

@@ -0,0 +1,869 @@
+<?xml version='1.0'?>
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+                xmlns:exsl="http://exslt.org/common"
+                xmlns:ng="http://docbook.org/docbook-ng"
+                xmlns:db="http://docbook.org/ns/docbook"
+                xmlns:l="http://docbook.sourceforge.net/xmlns/l10n/1.0"
+                exclude-result-prefixes="exsl"
+                version='1.0'>
+
+<!-- ********************************************************************
+     $Id: other.xsl 8182 2008-12-16 02:31:13Z xmldoc $
+     ********************************************************************
+
+     This file is part of the XSL DocBook Stylesheet distribution.
+     See ../README or http://docbook.sf.net/release/xsl/current/ for
+     copyright and other information.
+
+     ******************************************************************** -->
+
+<!-- * This file contains named templates related to things other than -->
+<!-- * just assembling the actual text of the main text flow of each man -->
+<!-- * page. This "other" stuff currently amounts to these steps: -->
+<!-- * -->
+<!-- *  - get contents of the "map" used to convert special characters -->
+<!-- *  - output boilerplate messages -->
+<!-- *  - escape backslash, dot, dash, and apostrophe characters -->
+<!-- *  - convert non-breaking spaces -->
+<!-- *  - add a comment to top part of roff source of each page -->
+<!-- *  - make a .TH title line (for controlling page header/footer) -->
+<!-- *  - set hyphenation, alignment, indent & line-breaking defaults -->
+<!-- *  - "prepare" the complete man page contents for final output -->
+<!-- *  - write the actual man file to the filesystem -->
+<!-- *  - write any "stub" pages to the filesystem -->
+<!-- * -->
+<!-- * The templates in this file are actually called only once per -->
+<!-- * each Refentry; they are just in a separate file for the purpose -->
+<!-- * of keeping things modular. -->
+
+<!-- ==================================================================== -->
+
+<xsl:preserve-space elements="*"/>
+
+<xsl:strip-space elements="
+abstract affiliation anchor answer appendix area areaset areaspec
+artheader article audiodata audioobject author authorblurb authorgroup
+beginpage bibliodiv biblioentry bibliography biblioset blockquote book
+bookbiblio bookinfo callout calloutlist caption caution chapter
+citerefentry cmdsynopsis co collab colophon colspec confgroup
+copyright dedication docinfo editor entrytbl epigraph equation
+example figure footnote footnoteref formalpara funcprototype
+funcsynopsis glossary glossdef glossdiv glossentry glosslist graphicco
+group highlights imagedata imageobject imageobjectco important index
+indexdiv indexentry indexterm informalequation informalexample
+informalfigure informaltable inlineequation inlinemediaobject
+itemizedlist itermset keycombo keywordset legalnotice listitem lot
+mediaobject mediaobjectco menuchoice msg msgentry msgexplan msginfo
+msgmain msgrel msgset msgsub msgtext note objectinfo
+orderedlist othercredit part partintro preface printhistory procedure
+programlistingco publisher qandadiv qandaentry qandaset question
+refentry reference refmeta refnamediv refsection refsect1 refsect1info refsect2
+refsect2info refsect3 refsect3info refsynopsisdiv refsynopsisdivinfo
+revhistory revision row sbr screenco screenshot sect1 sect1info sect2
+sect2info sect3 sect3info sect4 sect4info sect5 sect5info section
+sectioninfo seglistitem segmentedlist seriesinfo set setindex setinfo
+shortcut sidebar simplelist simplesect spanspec step subject
+subjectset substeps synopfragment table tbody textobject tfoot tgroup
+thead tip toc tocchap toclevel1 toclevel2 toclevel3 toclevel4
+toclevel5 tocpart varargs variablelist varlistentry videodata
+videoobject void warning subjectset
+
+classsynopsis
+constructorsynopsis
+destructorsynopsis
+fieldsynopsis
+methodparam
+methodsynopsis
+ooclass
+ooexception
+oointerface
+simplemsgentry
+manvolnum
+"/>
+
+<!-- ==================================================================== -->
+<!-- * Get character map contents -->
+<!-- ==================================================================== -->
+
+  <xsl:variable name="man.charmap.contents">
+    <xsl:if test="$man.charmap.enabled != 0">
+      <xsl:variable name="lang">
+        <xsl:call-template name="l10n.language">
+          <xsl:with-param name="target" select="//refentry[1]"/>
+        </xsl:call-template>
+      </xsl:variable>
+      <xsl:call-template name="read-character-map">
+        <xsl:with-param name="use.subset" select="$man.charmap.use.subset"/>
+        <xsl:with-param name="subset.profile">
+          <xsl:choose>
+            <xsl:when test="$lang = 'en'">
+              <xsl:value-of select="$man.charmap.subset.profile.english"/>
+            </xsl:when>
+            <xsl:otherwise>
+              <xsl:value-of select="$man.charmap.subset.profile"/>
+            </xsl:otherwise>
+          </xsl:choose>
+        </xsl:with-param>
+        <xsl:with-param name="uri">
+          <xsl:choose>
+            <xsl:when test="$man.charmap.uri != ''">
+              <xsl:value-of select="$man.charmap.uri"/>
+            </xsl:when>
+            <xsl:otherwise>
+              <xsl:value-of select="'../manpages/charmap.groff.xsl'"/>
+            </xsl:otherwise>
+          </xsl:choose>
+        </xsl:with-param>
+      </xsl:call-template>
+    </xsl:if>
+  </xsl:variable>
+
+<!-- ==================================================================== -->
+
+<xsl:template name="root.messages">
+  <xsl:param name="refname"/>
+  <!-- redefine this any way you'd like to output messages -->
+  <!-- DO NOT OUTPUT ANYTHING FROM THIS TEMPLATE -->
+  <!-- Example:
+  <xsl:if test="//foo">
+    <xsl:call-template name="log.message">
+      <xsl:with-param name="level">Warn</xsl:with-param>
+      <xsl:with-param name="source" select="$refname"/>
+      <xsl:with-param name="context-desc">
+        <xsl:text>limitation</xsl:text>
+      </xsl:with-param>
+      <xsl:with-param name="message">
+        <xsl:text>Output for foo element is not yet supported.</xsl:text>
+      </xsl:with-param>
+    </xsl:call-template>
+  </xsl:if>
+  -->
+</xsl:template>
+
+<!-- ==================================================================== -->
+<!-- * Escape roff special chars -->
+<!-- ==================================================================== -->
+
+<!-- ******************************************************************** -->
+<!-- *  -->
+<!-- * The backslash, dot, dash, and apostrophe (\, ., -, ') characters -->
+<!-- * have special meaning for roff, so before we do any other -->
+<!-- * processing, we must escape those characters where they appear in -->
+<!-- * the source content. -->
+<!-- *  -->
+<!-- * Here we also deal with replacing U+00a0 (non-breaking space) with -->
+<!-- * its roff equivalent -->
+<!-- *  -->
+<!-- ******************************************************************** -->
+
+<xsl:template match="//refentry//text()">
+  <xsl:call-template name="escape.roff.specials">
+    <xsl:with-param name="content">
+      <xsl:value-of select="."/>
+    </xsl:with-param>
+  </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="escape.roff.specials">
+  <xsl:param name="content"/>
+  <xsl:call-template name="convert.nobreak-space">
+    <xsl:with-param name="content">
+      <xsl:call-template name="escape.apostrophe">
+        <xsl:with-param name="content">
+          <xsl:call-template name="escape.dash">
+            <xsl:with-param name="content">
+              <xsl:call-template name="escape.dot">
+                <xsl:with-param name="content">
+                  <xsl:call-template name="escape.backslash">
+                    <xsl:with-param name="content" select="$content"/>
+                  </xsl:call-template>
+                </xsl:with-param>
+              </xsl:call-template>
+            </xsl:with-param>
+          </xsl:call-template>
+        </xsl:with-param>
+      </xsl:call-template>
+    </xsl:with-param>
+  </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="escape.backslash">
+  <xsl:param name="content"/>
+  <xsl:call-template name="string.subst">
+    <xsl:with-param name="string" select="$content"/>
+    <xsl:with-param name="target">\</xsl:with-param>
+    <!-- * we use "\e" instead of "\\" because the groff docs say -->
+    <!-- * that's the correct thing to do; also because testing -->
+    <!-- * shows that "\\" doesn't always work as expected; for -->
+    <!-- * example, "\\" within a table seems to mess things up -->
+    <xsl:with-param name="replacement">\e</xsl:with-param>
+  </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="escape.dot">
+  <xsl:param name="content"/>
+  <xsl:call-template name="string.subst">
+    <xsl:with-param name="string" select="$content"/>
+    <xsl:with-param name="target">.</xsl:with-param>
+    <xsl:with-param name="replacement">\&amp;.</xsl:with-param>
+  </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="escape.dash">
+  <xsl:param name="content"/>
+  <xsl:call-template name="string.subst">
+    <xsl:with-param name="string" select="$content"/>
+    <xsl:with-param name="target">-</xsl:with-param>
+    <xsl:with-param name="replacement">\-</xsl:with-param>
+  </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="escape.apostrophe">
+  <xsl:param name="content"/>
+  <xsl:call-template name="string.subst">
+    <xsl:with-param name="string" select="$content"/>
+    <xsl:with-param name="target">'</xsl:with-param>
+    <xsl:with-param name="replacement">\'</xsl:with-param>
+  </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="convert.nobreak-space">
+  <xsl:param name="content"/>
+  <xsl:call-template name="string.subst">
+    <xsl:with-param name="string" select="$content"/>
+    <xsl:with-param name="target">&#x00a0;</xsl:with-param>
+    <!-- * A no-break space can be written two ways in roff; the -->
+    <!-- * difference, according to the "Page Motions" node in the -->
+    <!-- * groff info page, is: -->
+    <!-- *  -->
+    <!-- *   "\ " = -->
+    <!-- *   An unbreakable and unpaddable (i.e. not expanded -->
+    <!-- *   during filling) space. -->
+    <!-- *  -->
+    <!-- *   "\~" = -->
+    <!-- *   An unbreakable space that stretches like a normal -->
+    <!-- *   inter-word space when a line is adjusted."  -->
+    <!-- *  -->
+    <!-- * Unfortunately, roff seems to do some weird things with -->
+    <!-- * long lines that only have words separated by "\~" -->
+    <!-- * spaces, so it's safer just to stick with the "\ " space -->
+    <!-- *  -->
+    <!-- * We append a "\&" to handle the case of a no-break space that -->
+    <!-- * appears at the end of a line - because later processing will -->
+    <!-- * cause that space to get eaten otherwise. -->
+    <xsl:with-param name="replacement">\ \&amp;</xsl:with-param>
+  </xsl:call-template>
+</xsl:template>
+
+<!-- ==================================================================== -->
+
+<!-- * top.comment generates a comment containing metadata for the man -->
+<!-- * page; for example, Author, Generator, and Date information -->
+
+  <xsl:template name="top.comment">
+    <xsl:param name="info"/>
+    <xsl:param name="date"/>
+    <xsl:param name="title"/>
+    <xsl:param name="manual"/>
+    <xsl:param name="source"/>
+    <xsl:param name="refname"/>
+    <xsl:text>.\"     Title: </xsl:text>
+    <xsl:call-template name="replace.dots.and.dashes">
+      <xsl:with-param name="content" select="$title"/>
+    </xsl:call-template>
+    <xsl:text>&#10;</xsl:text>
+    <xsl:text>.\"    Author: </xsl:text>
+    <xsl:call-template name="replace.dots.and.dashes">
+      <xsl:with-param name="content">
+        <xsl:call-template name="make.roff.metadata.author">
+          <xsl:with-param name="info" select="$info"/>
+          <xsl:with-param name="refname" select="$refname"/>
+        </xsl:call-template>
+      </xsl:with-param>
+    </xsl:call-template>
+    <xsl:text>&#10;</xsl:text>
+    <xsl:text>.\" Generator: DocBook </xsl:text>
+    <xsl:value-of select="$DistroTitle"/>
+    <xsl:text> v</xsl:text>
+    <xsl:call-template name="replace.dots.and.dashes">
+      <xsl:with-param name="content" select="$VERSION"/>
+    </xsl:call-template>
+    <xsl:text> &lt;http://docbook.sf.net/></xsl:text>
+    <xsl:text>&#10;</xsl:text>
+    <xsl:text>.\"      Date: </xsl:text>
+    <xsl:call-template name="replace.dots.and.dashes">
+      <xsl:with-param name="content" select="$date"/>
+    </xsl:call-template>
+    <xsl:text>&#10;</xsl:text>
+    <xsl:text>.\"    Manual: </xsl:text>
+    <xsl:call-template name="replace.dots.and.dashes">
+      <xsl:with-param name="content" select="$manual"/>
+    </xsl:call-template>
+    <xsl:text>&#10;</xsl:text>
+    <xsl:text>.\"    Source: </xsl:text>
+    <xsl:call-template name="replace.dots.and.dashes">
+      <xsl:with-param name="content" select="$source"/>
+    </xsl:call-template>
+    <xsl:text>&#10;</xsl:text>
+    <xsl:text>.\"  Language: </xsl:text>
+    <xsl:call-template name="l10.language.name"/>
+    <xsl:text>&#10;</xsl:text>
+    <xsl:text>.\"</xsl:text>
+    <xsl:text>&#10;</xsl:text>
+  </xsl:template>
+
+<!-- ==================================================================== -->
+
+  <xsl:template name="TH.title.line">
+
+    <!-- * The exact way that .TH contents are displayed is system- -->
+    <!-- * dependent; it varies somewhat between OSes and roff -->
+    <!-- * versions. Below is a description of how Linux systems with -->
+    <!-- * a modern groff seem to render .TH contents. -->
+    <!-- * -->
+    <!-- *   title(section)  extra3  title(section)  <- page header -->
+    <!-- *   extra2          extra1  title(section)  <- page footer-->
+    <!-- * -->
+    <!-- * Or, using the names with which the man(7) man page refers -->
+    <!-- * to the various fields: -->
+    <!-- * -->
+    <!-- *   title(section)  manual  title(section)  <- page header -->
+    <!-- *   source          date    title(section)  <- page footer-->
+    <!-- * -->
+    <!-- * Note that while extra1, extra2, and extra3 are all (nominally) -->
+    <!-- * optional, in practice almost all pages include an "extra1" -->
+    <!-- * field, which is, universally, a date (in some form), and it is -->
+    <!-- * always rendered in the same place (the middle footer position) -->
+    <!-- * -->
+    <!-- * Here are a couple of examples of real-world man pages that -->
+    <!-- * have somewhat useful page headers/footers: -->
+    <!-- * -->
+    <!-- *   gtk-options(7)    GTK+ User's Manual   gtk-options(7) -->
+    <!-- *   GTK+ 1.2              2003-10-20       gtk-options(7) -->
+    <!-- * -->
+    <!-- *   svgalib(7)       Svgalib User Manual       svgalib(7) -->
+    <!-- *   Svgalib 1.4.1      16 December 1999        svgalib(7) -->
+    <!-- * -->
+    <xsl:param name="title"/>
+    <xsl:param name="section"/>
+    <xsl:param name="extra1"/>
+    <xsl:param name="extra2"/>
+    <xsl:param name="extra3"/>
+
+    <xsl:call-template name="mark.subheading"/>
+    <!-- * Note that we generate quotes around _every_ field in the -->
+    <!-- * .TH title line, including the "title" and "section" -->
+    <!-- * fields. That is because we use the contents of those "as -->
+    <!-- * is", unchanged from the DocBook source; and DTD-based -->
+    <!-- * validation does not provide a way to constrain them to be -->
+    <!-- * "space free" -->
+    <xsl:text>.TH "</xsl:text>
+    <xsl:call-template name="string.upper">
+      <xsl:with-param name="string">
+        <xsl:choose>
+          <xsl:when test="$man.th.title.max.length != ''">
+            <xsl:value-of
+                select="normalize-space(substring($title, 1, $man.th.title.max.length))"/>
+          </xsl:when>
+          <xsl:otherwise>
+            <xsl:value-of select="normalize-space($title)"/>
+          </xsl:otherwise>
+        </xsl:choose>
+      </xsl:with-param>
+    </xsl:call-template>
+    <xsl:text>" "</xsl:text>
+    <xsl:value-of select="normalize-space($section)"/>
+    <xsl:text>" "</xsl:text>
+    <xsl:if test="$man.th.extra1.suppress = 0">
+      <!-- * there is no max.length for the extra1 field; the reason -->
+      <!-- * is, it is almost always a date, and it is not possible -->
+      <!-- * to truncate dates without changing their meaning -->
+      <xsl:value-of select="normalize-space($extra1)"/>
+    </xsl:if>
+    <xsl:text>" "</xsl:text>
+    <xsl:if test="$man.th.extra2.suppress = 0">
+      <xsl:choose>
+        <!-- * if max.length is non-empty, use value to truncate field -->
+        <xsl:when test="$man.th.extra2.max.length != ''">
+          <xsl:value-of
+              select="normalize-space(substring($extra2, 1, $man.th.extra2.max.length))"/>
+        </xsl:when>
+        <xsl:otherwise>
+          <xsl:value-of select="normalize-space($extra2)"/>
+        </xsl:otherwise>
+      </xsl:choose>
+    </xsl:if>
+    <xsl:text>" "</xsl:text>
+    <xsl:if test="$man.th.extra3.suppress = 0">
+      <xsl:choose>
+        <!-- * if max.length is non-empty, use value to truncate field -->
+        <xsl:when test="$man.th.extra3.max.length != ''">
+          <xsl:value-of
+              select="normalize-space(substring($extra3, 1, $man.th.extra3.max.length))"/>
+        </xsl:when>
+        <xsl:otherwise>
+          <xsl:value-of select="normalize-space($extra3)"/>
+        </xsl:otherwise>
+      </xsl:choose>
+    </xsl:if>
+    <xsl:text>"&#10;</xsl:text>
+    <xsl:call-template name="mark.subheading"/>
+  </xsl:template>
+
+  <!-- ============================================================== -->
+
+  <xsl:template name="set.default.formatting">
+    <!-- * Set default hyphenation, justification, indentation and -->
+    <!-- * line-breaking -->
+    <!-- * -->
+    <!-- * If the value of man.hypenate is zero (the default), then -->
+    <!-- * disable hyphenation (".nh" = "no hyphenation") -->
+    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
+    <xsl:text>.\" * set default formatting&#10;</xsl:text>
+    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
+    <xsl:if test="$man.hyphenate = 0">
+      <xsl:text>.\" disable hyphenation&#10;</xsl:text>
+      <xsl:text>.nh&#10;</xsl:text>
+    </xsl:if>
+    <!-- * If the value of man.justify is zero (the default), then -->
+    <!-- * disable justification (".ad l" means "adjust to left only") -->
+    <xsl:if test="$man.justify = 0">
+      <xsl:text>.\" disable justification</xsl:text>
+      <xsl:text> (adjust text to left margin only)&#10;</xsl:text>
+      <xsl:text>.ad l&#10;</xsl:text>
+    </xsl:if>
+    <xsl:if test="not($man.indent.refsect = 0)">
+      <xsl:text>.\" store initial "default indentation value"&#10;</xsl:text>
+      <xsl:text>.nr zq \n(IN&#10;</xsl:text>
+      <xsl:text>.\" adjust default indentation&#10;</xsl:text>
+      <xsl:text>.nr IN </xsl:text>
+      <xsl:value-of select="$man.indent.width"/>
+      <xsl:text>&#10;</xsl:text>
+      <xsl:text>.\" adjust indentation of SS headings&#10;</xsl:text>
+      <xsl:text>.nr SN \n(IN&#10;</xsl:text>
+    </xsl:if>
+    <!-- * Unless the value of man.break.after.slash is zero (the -->
+    <!-- * default), tell groff that it is OK to break a line -->
+    <!-- * after a slash when needed. -->
+    <xsl:if test="$man.break.after.slash != 0">
+      <xsl:text>.\" enable line breaks after slashes&#10;</xsl:text>
+      <xsl:text>.cflags 4 /&#10;</xsl:text>
+    </xsl:if>
+  </xsl:template>
+
+  <!-- ================================================================== -->
+
+  <!-- * The prepare.manpage.contents template is called after all -->
+  <!-- * other processing has been done, before serializing the -->
+  <!-- * result of all the other processing. It basically works on -->
+  <!-- * the result as one big string. -->
+  <xsl:template name="prepare.manpage.contents">
+    <xsl:param name="content" select="''"/>
+
+    <!-- * If user has provided a "local" string-substitution map to -->
+    <!-- * be applied /before/ the standard string-substitution map, -->
+    <!-- * apply it. -->
+    <xsl:variable name="pre.adjusted.content">
+      <xsl:choose>
+        <xsl:when test="$man.string.subst.map.local.pre">
+          <!-- * normalized value of man.string.subst.map.local.pre -->
+          <!-- * is non-empty, so get contents of map and apply them -->
+          <xsl:call-template name="apply-string-subst-map">
+            <xsl:with-param name="content" select="$content"/>
+            <xsl:with-param name="map.contents"
+                            select="exsl:node-set($man.string.subst.map.local.pre)/*"/>
+          </xsl:call-template>
+        </xsl:when>
+        <xsl:otherwise>
+          <!-- * value of man.string.subst.map.local.pre is empty, -->
+          <!-- * so just copy original contents -->
+          <xsl:value-of select="$content"/>
+        </xsl:otherwise>
+      </xsl:choose>
+    </xsl:variable>
+
+    <!-- * Apply standard string-substitution map. The main purpose -->
+    <!-- * of this map is to escape certain characters that have -->
+    <!-- * special meaning in roff, and to replace certain characters -->
+    <!-- * used within the stylesheet internally to represent roff -->
+    <!-- * markup characters. -->
+    <xsl:variable name="adjusted.content">
+      <xsl:call-template name="apply-string-subst-map">
+        <xsl:with-param name="content" select="$pre.adjusted.content"/>
+        <xsl:with-param name="map.contents"
+                        select="exsl:node-set($man.string.subst.map)/*"/>
+      </xsl:call-template>
+    </xsl:variable>
+
+    <!-- * If user has provided a "local" string-substitution map to -->
+    <!-- * be applied /after/ the standard string-substitution map, -->
+    <!-- * apply it. -->
+    <xsl:variable name="post.adjusted.content">
+      <xsl:choose>
+        <xsl:when test="$man.string.subst.map.local.post">
+          <!-- * normalized value of man.string.subst.map.local.post -->
+          <!-- * is non-empty, so get contents of map and apply them -->
+          <xsl:call-template name="apply-string-subst-map">
+            <xsl:with-param name="content" select="$adjusted.content"/>
+            <xsl:with-param name="map.contents"
+                            select="exsl:node-set($man.string.subst.map.local.post)/*"/>
+          </xsl:call-template>
+        </xsl:when>
+        <xsl:otherwise>
+          <!-- * value of man.string.subst.map.local.post is empty, -->
+          <!-- * so just copy original contents -->
+          <xsl:value-of select="$adjusted.content"/>
+        </xsl:otherwise>
+      </xsl:choose>
+    </xsl:variable>
+
+    <!-- * Optionally, apply a character map to replace Unicode -->
+    <!-- * symbols and special characters. -->
+    <xsl:choose>
+      <xsl:when test="$man.charmap.enabled != 0">
+        <xsl:call-template name="apply-character-map">
+          <xsl:with-param name="content" select="$post.adjusted.content"/>
+          <xsl:with-param name="map.contents"
+                          select="exsl:node-set($man.charmap.contents)/*"/>
+        </xsl:call-template>
+      </xsl:when>
+      <xsl:otherwise>
+        <!-- * if we reach here, value of $man.charmap.enabled is zero, -->
+        <!-- * so we just pass the adjusted contents through "as is" -->
+        <xsl:value-of select="$adjusted.content"/>
+      </xsl:otherwise>
+    </xsl:choose>
+  </xsl:template>
+
+  <!-- ================================================================== -->
+  
+  <xsl:template name="write.man.file">
+    <xsl:param name="name"/>
+    <xsl:param name="section"/>
+    <xsl:param name="lang"/>
+    <xsl:param name="content"/>
+    <xsl:param name="filename">
+      <xsl:call-template name="make.adjusted.man.filename">
+        <xsl:with-param name="name" select="$name"/>
+        <xsl:with-param name="section" select="$section"/>
+        <xsl:with-param name="lang" select="$lang"/>
+      </xsl:call-template>
+    </xsl:param>
+    <xsl:call-template name="write.text.chunk">
+      <xsl:with-param name="filename" select="$filename"/>
+      <xsl:with-param name="suppress-context-node-name" select="1"/>
+      <xsl:with-param name="quiet" select="$man.output.quietly"/>
+      <xsl:with-param
+          name="message-prolog"
+          >Note: </xsl:with-param>
+      <xsl:with-param name="encoding" select="$man.output.encoding"/>
+      <xsl:with-param name="content" select="$content"/>
+    </xsl:call-template>
+  </xsl:template>
+
+  <!-- ============================================================== -->
+
+  <!-- * A "stub" is sort of alias for another file, intended to be read -->
+  <!-- * and expanded by soelim(1); it's simply a file whose complete -->
+  <!-- * contents are just a single line of the following form: -->
+  <!-- * -->
+  <!-- *  .so manX/realname.X -->
+  <!-- * -->
+  <!-- * "realname" is a name of another man-page file. That .so line is -->
+  <!-- * basically a roff "include" statement.  When the man command finds -->
+  <!-- * it, it calls soelim(1) and includes and displays the contents of -->
+  <!-- * the manX/realqname.X file. -->
+  <!-- * -->
+  <!-- * If a refentry has multiple refnames, we generate a "stub" page for -->
+  <!-- * each refname found, except for the first one. -->
+  <xsl:template name="write.stubs">
+    <xsl:param name="first.refname"/>
+    <xsl:param name="section"/>
+    <xsl:param name="lang"/>
+    <xsl:for-each select="refnamediv/refname">
+      <xsl:if test=". != $first.refname">
+        <xsl:call-template name="write.text.chunk">
+          <xsl:with-param name="filename">
+            <xsl:call-template name="make.adjusted.man.filename">
+              <xsl:with-param name="name" select="."/>
+              <xsl:with-param name="section" select="$section"/>
+              <xsl:with-param name="lang" select="$lang"/>
+            </xsl:call-template>
+          </xsl:with-param>
+          <xsl:with-param name="quiet" select="$man.output.quietly"/>
+          <xsl:with-param name="suppress-context-node-name" select="1"/>
+          <xsl:with-param name="message-prolog">Note: </xsl:with-param>
+          <xsl:with-param name="message-epilog"> (soelim stub)</xsl:with-param>
+          <xsl:with-param name="content">
+            <xsl:value-of select="concat('.so man', $section, '/')"/>
+            <xsl:call-template name="make.adjusted.man.filename">
+              <xsl:with-param name="name" select="$first.refname"/>
+              <xsl:with-param name="section" select="$section"/>
+            </xsl:call-template>
+            <xsl:text>&#10;</xsl:text>
+          </xsl:with-param>
+        </xsl:call-template>
+      </xsl:if>
+    </xsl:for-each>
+  </xsl:template>
+
+  <!-- ============================================================== -->
+
+  <!-- *  A manifest file is useful for doing "make clean" during -->
+  <!-- *  builds and for other purposes. When we make the manifest -->
+  <!-- *  file, we need to include in it a filename for each man-page -->
+  <!-- *  generated, including any "stub" pages. -->
+  <xsl:template name="generate.manifest">
+    <xsl:variable name="filelist">
+      <xsl:for-each select="//refentry">
+        <!-- * all refname instances in a Refentry inherit their section -->
+        <!-- * numbers from the parent Refentry; so we only need to get -->
+        <!-- * the section once per Refentry, not once per Refname -->
+        <xsl:variable name="section">
+          <xsl:call-template name="get.refentry.section">
+            <xsl:with-param name="quiet" select="1"/>
+          </xsl:call-template>
+        </xsl:variable>
+        <xsl:variable name="lang">
+          <xsl:call-template name="l10n.language"/>
+        </xsl:variable>
+        <xsl:for-each select="refnamediv/refname">
+          <xsl:call-template name="make.adjusted.man.filename">
+            <xsl:with-param name="name" select="."/>
+            <xsl:with-param name="section" select="$section"/>
+            <xsl:with-param name="lang" select="$lang"/>
+          </xsl:call-template>
+          <xsl:text>&#10;</xsl:text>
+        </xsl:for-each>
+      </xsl:for-each>
+    </xsl:variable>
+
+    <!-- * we write the manifest file once per document, not once per -->
+    <!-- * Refentry -->
+    <xsl:call-template name="write.text.chunk">
+      <xsl:with-param name="filename">
+        <xsl:value-of select="$man.output.manifest.filename"/>
+      </xsl:with-param>
+      <xsl:with-param name="quiet" select="1"/>
+      <xsl:with-param name="message-prolog">Note: </xsl:with-param>
+      <xsl:with-param name="message-epilog"> (manifest file)</xsl:with-param>
+      <xsl:with-param name="content">
+        <xsl:value-of select="$filelist"/>
+      </xsl:with-param>
+    </xsl:call-template>
+    <xsl:if test="$man.output.quietly = 0">
+      <xsl:message><xsl:text>&#10;</xsl:text></xsl:message>
+    </xsl:if>
+  </xsl:template>
+
+  <!-- ============================================================== -->
+
+  <xsl:template name="define.macros">
+    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
+    <xsl:text>.\" * (re)Define some macros&#10;</xsl:text>
+    <xsl:text>.\" -----------------------------------------------------------------&#10;</xsl:text>
+    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
+    <xsl:text>.\" toupper - uppercase a string (locale-aware)&#10;</xsl:text>
+    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
+    <xsl:text>.de toupper&#10;</xsl:text>
+    <xsl:text>.tr</xsl:text>
+    <xsl:text> </xsl:text>
+    <xsl:call-template name="make.tr.uppercase.arg"/>
+    <xsl:text>\\$*&#10;</xsl:text>
+    <xsl:text>.tr</xsl:text>
+    <xsl:text> </xsl:text>
+    <xsl:call-template name="make.tr.normalcase.arg"/>
+    <xsl:text>..&#10;</xsl:text>
+    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
+    <xsl:text>.\" SH-xref - format a cross-reference to an SH section&#10;</xsl:text>
+    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
+    <xsl:text>.de SH-xref
+.ie n \{\
+.\}
+.toupper \\$*
+.el \{\
+\\$*
+.\}
+..&#10;</xsl:text>
+    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
+    <xsl:text>.\" SH - level-one heading that works better for non-TTY output&#10;</xsl:text>
+    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
+    <xsl:text>.de1 SH&#10;</xsl:text>
+    <xsl:text>.\" put an extra blank line of space above the head in non-TTY output&#10;</xsl:text>
+    <xsl:call-template name="roff-if-start">
+      <xsl:with-param name="condition">t</xsl:with-param>
+    </xsl:call-template>
+    <xsl:text>.sp 1&#10;</xsl:text>
+    <xsl:call-template name="roff-if-end"/>
+    <xsl:text>.sp \\n[PD]u
+.nr an-level 1
+.set-an-margin
+.nr an-prevailing-indent \\n[IN]
+.fi
+.in \\n[an-margin]u
+.ti 0
+.HTML-TAG ".NH \\n[an-level]"
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+\." make the size of the head bigger
+.ps +3
+.ft B
+.ne (2v + 1u)
+.ie n \{\
+.\" if n (TTY output), use uppercase
+.toupper \\$*
+.\}
+.el \{\
+.nr an-break-flag 0
+.\" if not n (not TTY), use normal case (not uppercase)
+\\$1
+.in \\n[an-margin]u
+.ti 0
+.\" if not n (not TTY), put a border/line under subheading
+.sp -.6
+\l'\n(.lu'
+.\}
+..&#10;</xsl:text>
+    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
+    <xsl:text>.\" SS - level-two heading that works better for non-TTY output&#10;</xsl:text>
+    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
+    <xsl:text>.de1 SS
+.sp \\n[PD]u
+.nr an-level 1
+.set-an-margin
+.nr an-prevailing-indent \\n[IN]
+.fi
+.in \\n[IN]u
+.ti \\n[SN]u
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.ps \\n[PS-SS]u
+\." make the size of the head bigger
+.ps +2
+.ft B
+.ne (2v + 1u)
+.if \\n[.$] \&amp;\\$*
+..&#10;</xsl:text>
+    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
+    <xsl:text>.\" BB/BE - put background/screen (filled box) around block of text&#10;</xsl:text>
+    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
+    <xsl:text>.de BB
+.if t \{\
+.sp -.5
+.br
+.in +2n
+.ll -2n
+.gcolor red
+.di BX
+.\}
+..
+.de EB
+.if t \{\
+.if "\\$2"adjust-for-leading-newline" \{\
+.sp -1
+.\}
+.br
+.di
+.in
+.ll
+.gcolor
+.nr BW \\n(.lu-\\n(.i
+.nr BH \\n(dn+.5v
+.ne \\n(BHu+.5v
+.ie "\\$2"adjust-for-leading-newline" \{\
+\M[\\$1]\h'1n'\v'+.5v'\D'P \\n(BWu 0 0 \\n(BHu -\\n(BWu 0 0 -\\n(BHu'\M[]
+.\}
+.el \{\
+\M[\\$1]\h'1n'\v'-.5v'\D'P \\n(BWu 0 0 \\n(BHu -\\n(BWu 0 0 -\\n(BHu'\M[]
+.\}
+.in 0
+.sp -.5v
+.nf
+.BX
+.in
+.sp .5v
+.fi
+.\}
+..&#10;</xsl:text>
+    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
+    <xsl:text>.\" BM/EM - put colored marker in margin next to block of text&#10;</xsl:text>
+    <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#10;</xsl:text>
+    <xsl:text>.de BM
+.if t \{\
+.br
+.ll -2n
+.gcolor red
+.di BX
+.\}
+..
+.de EM
+.if t \{\
+.br
+.di
+.ll
+.gcolor
+.nr BH \\n(dn
+.ne \\n(BHu
+\M[\\$1]\D'P -.75n 0 0 \\n(BHu -(\\n[.i]u - \\n(INu - .75n) 0 0 -\\n(BHu'\M[]
+.in 0
+.nf
+.BX
+.in
+.fi
+.\}
+..&#10;</xsl:text>
+</xsl:template>
+
+<xsl:template name="make.tr.uppercase.arg">
+  <xsl:call-template name="string.shuffle">
+    <xsl:with-param name="string1">
+      <xsl:call-template name="gentext">
+        <xsl:with-param name="key" select="'lowercase.alpha'"/>
+      </xsl:call-template>
+    </xsl:with-param>
+    <xsl:with-param name="string2">
+      <xsl:call-template name="gentext">
+        <xsl:with-param name="key" select="'uppercase.alpha'"/>
+      </xsl:call-template>
+    </xsl:with-param>
+  </xsl:call-template>
+  <xsl:text>&#10;</xsl:text>
+</xsl:template>
+
+<xsl:template name="make.tr.normalcase.arg">
+  <xsl:call-template name="string.shuffle">
+    <xsl:with-param name="string1">
+      <xsl:call-template name="gentext">
+        <xsl:with-param name="key" select="'lowercase.alpha'"/>
+      </xsl:call-template>
+    </xsl:with-param>
+    <xsl:with-param name="string2">
+      <xsl:call-template name="gentext">
+        <xsl:with-param name="key" select="'lowercase.alpha'"/>
+      </xsl:call-template>
+    </xsl:with-param>
+  </xsl:call-template>
+  <xsl:text>&#10;</xsl:text>
+</xsl:template>
+
+<xsl:template name="string.shuffle">
+  <!-- * given two strings, "shuffle" them together into one -->
+  <xsl:param name="string1"/>
+  <xsl:param name="string2"/>
+  <xsl:value-of select="substring($string1, 1, 1)"/>
+  <xsl:value-of select="substring($string2, 1, 1)"/>
+  <xsl:if test="string-length($string1) > 1">
+    <xsl:call-template name="string.shuffle">
+      <xsl:with-param name="string1">
+        <xsl:value-of select="substring($string1, 2)"/>
+      </xsl:with-param>
+      <xsl:with-param name="string2">
+        <xsl:value-of select="substring($string2, 2)"/>
+      </xsl:with-param>
+    </xsl:call-template>
+  </xsl:if>
+</xsl:template>
+
+</xsl:stylesheet>