git-multirepo 1.0.0.beta49 → 1.0.0.beta50

data/lib/multirepo/utility/verbosity.rb

@@ -1,6 +1,6 @@
-module MultiRepo
-  class Verbosity
-    OUTPUT_NEVER = 0
-    OUTPUT_ON_ERROR = 1
-  end
-end
+module MultiRepo
+  class Verbosity
+    OUTPUT_NEVER = 0
+    OUTPUT_ON_ERROR = 1
+  end
+end

data/resources/.gitconfig

@@ -1,3 +1,3 @@
-[merge "ours"]
-	name = "Always keep ours"
+[merge "ours"]
+	name = "Always keep ours"
 	driver = true

data/resources/post-commit

@@ -1,6 +1,6 @@
-#!/usr/bin/env ruby
-
-require "rubygems"
-require "git-multirepo"
-
-MultiRepo::PostCommitHook.run
+#!/usr/bin/env ruby
+
+require "rubygems"
+require "git-multirepo"
+
+MultiRepo::PostCommitHook.run

data/resources/pre-commit

@@ -1,6 +1,6 @@
-#!/usr/bin/env ruby
-
-require "rubygems"
-require "git-multirepo"
-
-MultiRepo::PreCommitHook.run
+#!/usr/bin/env ruby
+
+require "rubygems"
+require "git-multirepo"
+
+MultiRepo::PreCommitHook.run

data/spec/integration/init_spec.rb

@@ -1,19 +1,19 @@
-require "multirepo/commands/init"
-
-RSpec.describe("Init") do
-  it "creates the config file" do
-    pending
-  end
-  
-  it "adds only specified repos to the config file" do
-    pending
-  end
-  
-  it "installs the hooks" do
-    pending
-  end
-  
-  it "fails when there are uncommitted changes in dependencies" do
-    pending
-  end
-end
+require "multirepo/commands/init"
+
+RSpec.describe("Init") do
+  it "creates the config file" do
+    pending
+  end
+  
+  it "adds only specified repos to the config file" do
+    pending
+  end
+  
+  it "installs the hooks" do
+    pending
+  end
+  
+  it "fails when there are uncommitted changes in dependencies" do
+    pending
+  end
+end

data/spec/spec_helper.rb

@@ -1,89 +1,89 @@
-# This file was generated by the `rspec --init` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# The generated `.rspec` file contains `--require spec_helper` which will cause this
-# file to always be loaded, without a need to explicitly require it in any files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need it.
-#
-# The `.rspec` file also contains a few flags that are not defaults but that
-# users commonly want.
-#
-# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
-RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
-  config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    # be_bigger_than(2).and_smaller_than(4).description
-    #   # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #   # => "be bigger than 2"
-    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
-  end
-
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
-  config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
-    mocks.verify_partial_doubles = true
-  end
-
-# The settings below are suggested to provide a good initial experience
-# with RSpec, but feel free to customize to your heart's content.
-=begin
-  # These two settings work together to allow you to limit a spec run
-  # to individual examples or groups you care about by tagging them with
-  # `:focus` metadata. When nothing is tagged with `:focus`, all examples
-  # get run.
-  config.filter_run :focus
-  config.run_all_when_everything_filtered = true
-
-  # Limits the available syntax to the non-monkey patched syntax that is recommended.
-  # For more details, see:
-  #   - http://myronmars.to/n/dev-blog/2012/06/rspecs-new-expectation-syntax
-  #   - http://teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
-  #   - http://myronmars.to/n/dev-blog/2014/05/notable-changes-in-rspec-3#new__config_option_to_disable_rspeccore_monkey_patching
-  config.disable_monkey_patching!
-
-  # This setting enables warnings. It's recommended, but in some cases may
-  # be too noisy due to issues in dependencies.
-  config.warnings = true
-
-  # Many RSpec users commonly either run the entire suite or an individual
-  # file, and it's useful to allow more verbose output when running an
-  # individual spec file.
-  if config.files_to_run.one?
-    # Use the documentation formatter for detailed output,
-    # unless a formatter has already been configured
-    # (e.g. via a command-line flag).
-    config.default_formatter = 'doc'
-  end
-
-  # Print the 10 slowest examples and example groups at the
-  # end of the spec run, to help surface which specs are running
-  # particularly slow.
-  config.profile_examples = 10
-
-  # Run specs in random order to surface order dependencies. If you find an
-  # order dependency and want to debug it, you can fix the order by providing
-  # the seed, which is printed after each run.
-  #     --seed 1234
-  config.order = :random
-
-  # Seed global randomization in this process using the `--seed` CLI option.
-  # Setting this allows you to use `--seed` to deterministically reproduce
-  # test failures related to randomization by passing the same `--seed` value
-  # as the one that triggered the failure.
-  Kernel.srand config.seed
-=end
-end
+# This file was generated by the `rspec --init` command. Conventionally, all
+# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
+# The generated `.rspec` file contains `--require spec_helper` which will cause this
+# file to always be loaded, without a need to explicitly require it in any files.
+#
+# Given that it is always loaded, you are encouraged to keep this file as
+# light-weight as possible. Requiring heavyweight dependencies from this file
+# will add to the boot time of your test suite on EVERY test run, even for an
+# individual file that may not need all of that loaded. Instead, consider making
+# a separate helper file that requires the additional dependencies and performs
+# the additional setup, and require it from the spec files that actually need it.
+#
+# The `.rspec` file also contains a few flags that are not defaults but that
+# users commonly want.
+#
+# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
+RSpec.configure do |config|
+  # rspec-expectations config goes here. You can use an alternate
+  # assertion/expectation library such as wrong or the stdlib/minitest
+  # assertions if you prefer.
+  config.expect_with :rspec do |expectations|
+    # This option will default to `true` in RSpec 4. It makes the `description`
+    # and `failure_message` of custom matchers include text for helper methods
+    # defined using `chain`, e.g.:
+    # be_bigger_than(2).and_smaller_than(4).description
+    #   # => "be bigger than 2 and smaller than 4"
+    # ...rather than:
+    #   # => "be bigger than 2"
+    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
+  end
+
+  # rspec-mocks config goes here. You can use an alternate test double
+  # library (such as bogus or mocha) by changing the `mock_with` option here.
+  config.mock_with :rspec do |mocks|
+    # Prevents you from mocking or stubbing a method that does not exist on
+    # a real object. This is generally recommended, and will default to
+    # `true` in RSpec 4.
+    mocks.verify_partial_doubles = true
+  end
+
+# The settings below are suggested to provide a good initial experience
+# with RSpec, but feel free to customize to your heart's content.
+=begin
+  # These two settings work together to allow you to limit a spec run
+  # to individual examples or groups you care about by tagging them with
+  # `:focus` metadata. When nothing is tagged with `:focus`, all examples
+  # get run.
+  config.filter_run :focus
+  config.run_all_when_everything_filtered = true
+
+  # Limits the available syntax to the non-monkey patched syntax that is recommended.
+  # For more details, see:
+  #   - http://myronmars.to/n/dev-blog/2012/06/rspecs-new-expectation-syntax
+  #   - http://teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
+  #   - http://myronmars.to/n/dev-blog/2014/05/notable-changes-in-rspec-3#new__config_option_to_disable_rspeccore_monkey_patching
+  config.disable_monkey_patching!
+
+  # This setting enables warnings. It's recommended, but in some cases may
+  # be too noisy due to issues in dependencies.
+  config.warnings = true
+
+  # Many RSpec users commonly either run the entire suite or an individual
+  # file, and it's useful to allow more verbose output when running an
+  # individual spec file.
+  if config.files_to_run.one?
+    # Use the documentation formatter for detailed output,
+    # unless a formatter has already been configured
+    # (e.g. via a command-line flag).
+    config.default_formatter = 'doc'
+  end
+
+  # Print the 10 slowest examples and example groups at the
+  # end of the spec run, to help surface which specs are running
+  # particularly slow.
+  config.profile_examples = 10
+
+  # Run specs in random order to surface order dependencies. If you find an
+  # order dependency and want to debug it, you can fix the order by providing
+  # the seed, which is printed after each run.
+  #     --seed 1234
+  config.order = :random
+
+  # Seed global randomization in this process using the `--seed` CLI option.
+  # Setting this allows you to use `--seed` to deterministically reproduce
+  # test failures related to randomization by passing the same `--seed` value
+  # as the one that triggered the failure.
+  Kernel.srand config.seed
+=end
+end

metadata

@@ -1,131 +1,131 @@
 --- !ruby/object:Gem::Specification
 name: git-multirepo
 version: !ruby/object:Gem::Version
-  version: 1.0.0.beta49
+  version: 1.0.0.beta50
 platform: ruby
 authors:
 - Michaël Fortin
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2015-06-06 00:00:00.000000000 Z
+date: 2015-07-21 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: bundler
   requirement: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: '1.7'
   type: :development
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: '1.7'
 - !ruby/object:Gem::Dependency
   name: rake
   requirement: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: '10.0'
   type: :development
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: '10.0'
 - !ruby/object:Gem::Dependency
   name: rspec
   requirement: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: 3.1.0
   type: :development
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: 3.1.0
 - !ruby/object:Gem::Dependency
   name: claide
   requirement: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: '0.8'
-    - - '>='
+    - - ">="
       - !ruby/object:Gem::Version
         version: 0.8.0
   type: :runtime
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: '0.8'
-    - - '>='
+    - - ">="
       - !ruby/object:Gem::Version
         version: 0.8.0
 - !ruby/object:Gem::Dependency
   name: colored
   requirement: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: '1.2'
   type: :runtime
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: '1.2'
 - !ruby/object:Gem::Dependency
   name: os
   requirement: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: 0.9.6
   type: :runtime
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: 0.9.6
 - !ruby/object:Gem::Dependency
   name: terminal-table
   requirement: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: 1.4.5
   type: :runtime
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: 1.4.5
 - !ruby/object:Gem::Dependency
   name: ruby-graphviz
   requirement: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: 1.2.1
   type: :runtime
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
-    - - ~>
+    - - "~>"
       - !ruby/object:Gem::Version
         version: 1.2.1
 description: Track multiple Git repositories side-by-side.
@@ -136,14 +136,14 @@ executables:
 extensions: []
 extra_rdoc_files: []
 files:
-- .gitattributes
-- .gitbugtraq
-- .gitignore
-- .multirepo
-- .multirepo.lock
-- .multirepo.meta
-- .rspec
-- .rubocop.yml
+- ".gitattributes"
+- ".gitbugtraq"
+- ".gitignore"
+- ".multirepo"
+- ".multirepo.lock"
+- ".multirepo.meta"
+- ".rspec"
+- ".rubocop.yml"
 - CHANGELOG.md
 - Gemfile
 - Gemfile.lock
@@ -157,14 +157,13 @@ files:
 - docs/graphs/dependencies-on-multiple-levels.graffle
 - docs/graphs/dependencies-on-one-level.graffle
 - git-multirepo.gemspec
-- lib/commands.rb
 - lib/git-multirepo.rb
-- lib/info.rb
 - lib/multirepo/commands/add-command.rb
 - lib/multirepo/commands/branch-command.rb
 - lib/multirepo/commands/checkout-command.rb
 - lib/multirepo/commands/clone-command.rb
 - lib/multirepo/commands/command.rb
+- lib/multirepo/commands/commands.rb
 - lib/multirepo/commands/do-command.rb
 - lib/multirepo/commands/graph-command.rb
 - lib/multirepo/commands/init-command.rb
@@ -193,6 +192,7 @@ files:
 - lib/multirepo/git/repo.rb
 - lib/multirepo/hooks/post-commit-hook.rb
 - lib/multirepo/hooks/pre-commit-hook.rb
+- lib/multirepo/info.rb
 - lib/multirepo/logic/dependency.rb
 - lib/multirepo/logic/merge-descriptor.rb
 - lib/multirepo/logic/node.rb
@@ -219,17 +219,17 @@ require_paths:
 - lib
 required_ruby_version: !ruby/object:Gem::Requirement
   requirements:
-  - - ~>
+  - - "~>"
     - !ruby/object:Gem::Version
       version: '2.0'
 required_rubygems_version: !ruby/object:Gem::Requirement
   requirements:
-  - - '>'
+  - - ">"
     - !ruby/object:Gem::Version
       version: 1.3.1
 requirements: []
 rubyforge_project: 
-rubygems_version: 2.4.5
+rubygems_version: 2.2.3
 signing_key: 
 specification_version: 4
 summary: Track multiple Git repositories side-by-side