ghost-manager 1.0.0 → 1.0.1

data/magneto/source/assets/bower_components/modular-scale/stylesheets/modular-scale/_calc.scss

@@ -1,17 +0,0 @@
-@function ms-calc($Value, $Base: $ms-base, $Ratio: $ms-ratio) {
-  
-  // If pow exists use it.
-  // It supports non-interger values!
-  @if $MS-pow-exists {
-
-    // The formula for figuring out modular scales is:
-    // (r^v)*b
-    @return pow($Ratio, $Value) * $Base;
-  }
-
-  // If not, use ms-pow().
-  // Not as fast or capable of non-integer exponents.
-  @else {
-    @return ms-pow($Ratio, $Value) * $Base;
-  }
-}

data/magneto/source/assets/bower_components/modular-scale/stylesheets/modular-scale/_function-list.scss

@@ -1,68 +0,0 @@
-// Outputs a list of values instead of a single value
-@function ms-list($Start: 0, $End: 0, $Bases: $ms-base, $Ratios: $ms-ratio) {
-  
-  // Seed results
-  $Positive-return: ();
-  $Negitive-return: ();
-  $Return: ();
-
-  @if $End >= 0 {
-    // Generate a list of all possible values
-    $Positive-return: ms-generate-list($End, $Bases, $Ratios);
-    
-    // Sort the generated lists
-    $Positive-return: ms-sort-list($Positive-return);
-
-    // Trim list
-    $Trim-list: ();
-    // If the starting value is a positive number
-    // trim the positive return from that
-    @if $Start >= 0 {
-      @for $i from ($Start + 1) through $End + 1 {
-        $Trim-list: join($Trim-list, nth($Positive-return, $i));
-      }
-    }
-    // If not, then include everything up to the end.
-    @else {
-      @for $i from 1 through $End + 1 {
-        $Trim-list: join($Trim-list, nth($Positive-return, $i));
-      }
-    }
-    $Positive-return: $Trim-list;
-  }
-  
-  // Generate a negitive list
-  @if $Start < 0 {
-    // Generate a list of all possible values
-    $Negitive-return: ms-generate-list($Start, $Bases, $Ratios);
-    
-    // Sort the generated lists
-    $Negitive-return: ms-sort-list($Negitive-return);
-    
-    // Reverse negitive list results.
-    $MS-new-return: ();
-    @each $i in $Negitive-return {
-      $MS-new-return: join($i, $MS-new-return);
-    }
-    $Negitive-return: $MS-new-return;
-
-    // Trim list
-    $Trim-list: ();
-    @if $End < 0 {
-      @for $i from abs($End) through (abs($Start) + 2) {
-        $Trim-list: join(nth($Negitive-return, $i), $Trim-list);
-      }
-    }
-    @else {
-      @for $i from 2 through (abs($Start) + 1) {
-        $Trim-list: join(nth($Negitive-return, $i), $Trim-list);
-      }
-    }
-    $Negitive-return: $Trim-list;
-  }
-  
-  // Join both positive and negitive possibilities.
-  $Return: join($Negitive-return, $Positive-return);
-
-  @return $Return;
-}

data/magneto/source/assets/bower_components/modular-scale/stylesheets/modular-scale/_function.scss

@@ -1,55 +0,0 @@
-// The main function that brings it all together
-@function ms($Value: 0, $Bases: $ms-base, $Ratios: $ms-ratio) {
-
-  // If no multi-base or multi-ratio stuff is going on
-  // then just retrn the basic calculaiton
-  @if length($Bases) == 1 and length($Ratios) == 1 {
-    @return ms-round-px(ms-calc($Value, $Bases, $Ratios));
-  }
-
-  // Do calculations directly in Ruby when avalible
-  @if $MS-gem-exists {
-
-    // Remove units from bases
-    $Unit: nth($Bases, 1) * 0 + 1; // Extracts the unit from the base
-    $Unitless-Bases: ();
-    @each $Base in $Bases {
-      $Base: $Base/$Unit;
-      $Unitless-Bases: join($Unitless-Bases, $Base);
-    }
-
-    // Calculate natively in Ruby
-    @return ms-round-px(ms-gem-func($Value, $Unitless-Bases, $Ratios) * $Unit);
-  }
-
-  // Generate a list of all possible values
-  $Return: ms-generate-list($Value, $Bases, $Ratios);
-
-  // Sort the generated lists
-  $Return: ms-sort-list($Return);
-
-  // Reverse list if its negitive.
-  @if $Value < 0 {
-    $MS-new-return: ();
-    @each $i in $Return {
-      $MS-new-return: join($i, $MS-new-return);
-    }
-    $Return: $MS-new-return;
-  }
-
-  // Normalize value for counting from 1
-  // Because CSS counts things from 1
-  // So Sass does as well
-  // So I get to write fun stuff like this
-  $Value: abs($Value) + 1;
-
-  // Find the correct value in the list
-  $Return: nth($Return, $Value);
-
-  @return ms-round-px($Return);
-}
-
-// Same function, different name, for good measure.
-@function modular-scale($Value: 0, $Bases: $ms-base, $Ratios: $ms-ratio) {
-  @return ms($Value, $Bases, $Ratios);
-}

data/magneto/source/assets/bower_components/modular-scale/stylesheets/modular-scale/_generate-list.scss

@@ -1,103 +0,0 @@
-@function ms-reverse-list($list) {
-  @if length($list) > 1 {
-    @if nth($list, 1) > nth($list, length($list)) {
-      $MS-reversed-list: ();
-      @each $Value in $list {
-        $MS-reversed-list: join($Value, $MS-reversed-list);
-      }
-      @return $MS-reversed-list;
-    }
-  }
-  @return $list;
-}
-
-
-@function ms-generate-list($Value: 0, $Bases: $ms-base, $Ratios: $ms-ratio) {
-
-  // Create blank lists
-  $MS-list: ();
-  $MS-base-list: ();
-
-  // Loop through each ratio AND each base
-  // to generate all possibilities.
-  @each $Ratio in $Ratios {
-    @each $Base in $Bases {
-      
-      // Set base variables
-      $MS-base-list: ();
-      $Base-counter: 0;
-      
-      // Seed list with an initial value
-      $MS-base-list: $Base;
-      
-      // Find values on a positive scale
-      @if $Value >= 0 {
-        
-        // Find lower values on the scale
-        $Base-counter: -1;
-        @while ms-calc($Base-counter, $Base, $Ratio) >= nth($Bases, 1) {
-          $MS-base-list: join($MS-base-list, ms-calc($Base-counter, $Base, $Ratio));
-          $Base-counter: $Base-counter - 1;
-        }
-        
-        // Ensure the list is smallest to largest
-        $MS-base-list: ms-reverse-list($MS-base-list);
-
-        // Find higher possible values on the scale
-        $Base-counter: 1;
-        @while ms-calc($Base-counter, $Base, $Ratio) <= ms-calc($Value, nth($Bases, 1), $Ratio) {
-          $MS-base-list: join($MS-base-list, ms-calc($Base-counter, $Base, $Ratio));
-          $Base-counter: $Base-counter + 1;
-        }
-      }
-
-      // Find values on a negitive scale
-      @else {
-        
-        // Find lower values on the scale
-        $Base-counter: 1;
-        @while ms-calc($Base-counter, $Base, $Ratio) <= nth($Bases, 1) {
-          $MS-base-list: join($MS-base-list, ms-calc($Base-counter, $Base, $Ratio));
-          $Base-counter: $Base-counter + 1;
-        }
-
-        // Ensure the list is smallest to largest
-        $MS-base-list: ms-reverse-list($MS-base-list);
-
-        // Find higher possible values on the scale
-        $Base-counter: -1;
-        @while ms-calc($Base-counter, $Base, $Ratio) >= ms-calc($Value, nth($Bases, 1), $Ratio) {
-          $MS-calc: ms-calc($Base-counter, $Base, $Ratio);
-          // detect if the value excedes the main base value
-          @if $MS-calc < nth($Bases, 1) {
-            $MS-base-list: join($MS-base-list, $MS-calc);
-          }
-          $Base-counter: $Base-counter - 1;
-        }
-        
-        // Trim outlier base.
-        @if length($Bases) > 1 {
-          @for $i from 2 through length($Bases) {
-            @if nth($MS-base-list, 1) > nth($Bases, 1) {
-              $MS-new-list: ();
-              @for $i from 2 through length($MS-base-list) {
-                $MS-new-list: join($MS-new-list, nth($MS-base-list, $i));
-              }
-              $MS-base-list: $MS-new-list;
-            }
-          }
-        }
-      }
-      
-      // reverse list if its largest to smallest
-      $MS-base-list: ms-reverse-list($MS-base-list);
-
-      // Add new possibilities to the master list
-      $MS-list: append($MS-list, $MS-base-list, comma);
-
-    }
-  }
-  
-  // After all the possibilities are found, output a master list
-  @return $MS-list;
-}

data/magneto/source/assets/bower_components/modular-scale/stylesheets/modular-scale/_pow.scss

@@ -1,40 +0,0 @@
-// If a native exponent function doesnt exist
-// this one is needed.
-@function ms-pow($Base, $Exponent) {
-
-  // Find and remove unit.
-  // Avoids messyness with unit calculations
-  $Unit: $Base * 0 + 1;
-  $Base: $Base/$Unit;
-
-  // This function doesnt support non-interger exponents.
-  // Warn the user about why this is breaking.
-	@if round($Exponent) != $Exponent {
-		@warn "Unfortunately, you need Compass to use non-integer exponents";
-	}
-
-  // Set up the loop, priming the return with the base.
-	$Return: $Base;
-
-  // If the number is positive, multiply it.
-  @if $Exponent > 0 {
-    // Basic feedback loop as exponents
-    // are recursivley multiplied numbers.
-    @for $i from 1 to $Exponent {
-      $Return: $Return * $Base;
-    }
-  }
-
-  // If the number is 0 or negitive
-  // divide instead of multiply.
-  @else {
-    // Libsass doesnt allow negitive values in loops
-    @for $i from (-1 + 1) to (abs($Exponent) + 1) {
-      $Return: $Return / $Base;
-    }
-  }
-
-  // Return is now compounded redy to be returned.
-  // Add the unit back onto the number.
-	@return $Return * $Unit;
-}

data/magneto/source/assets/bower_components/modular-scale/stylesheets/modular-scale/_ratios.scss

@@ -1,20 +0,0 @@
-// Golden ratio
-$phi              : 1.618034          ;
-$golden           : $phi              ;
-
-$double-octave    : 4                 ;
-$major-twelfth    : 3                 ;
-$major-eleventh   : 2.666666667       ;
-$major-tenth      : 2.5               ;
-$octave           : 2                 ;
-$major-seventh    : 1.875             ;
-$minor-seventh    : 1.777777778       ;
-$major-sixth      : 1.666666667       ;
-$minor-sixth      : 1.6               ;
-$fifth            : 1.5               ;
-$augmented-fourth : 1.41421           ;
-$fourth           : 1.333333333       ;
-$major-third      : 1.25              ;
-$minor-third      : 1.2               ;
-$major-second     : 1.125             ;
-$minor-second     : 1.066666667       ;

data/magneto/source/assets/bower_components/modular-scale/stylesheets/modular-scale/_respond.scss

@@ -1,49 +0,0 @@
-// Stripping units is rarely a best practice and this function
-// should not be used elsewhere
-@function ms-unitless($val) {
-  $val: $val / ($val - $val + 1);
-  @return $val;
-}
-
-// Search config for values
-@function ms-range($x,$y,$range:$ms-range) {
-  @return nth(nth($range,$x),$y);
-}
-
-// Generate calc() function
-@function ms-respond-calc($value, $n, $range: $ms-range, $base: $ms-base) {
-  $val1: ms($value,$base,ms-range($n,1,$range));
-  $val2: ms($value,$base,ms-range($n+1,1,$range));
-  $break1: ms-range($n,2,$range);
-  $break2: ms-range($n+1,2,$range);
-  $diff: ms-unitless($val2) - ms-unitless($val1);
-  @if $ms-fluid {
-    @return calc( #{$val1} + #{$diff} * ( ( 100vw - #{$break1}) / #{ms-unitless($break2) - ms-unitless($break1)} ) );
-  } @else {
-    @return ms($value,$base,ms-range($n,1,$range));
-  }
-}
-
-// Main responsive mixin
-@mixin ms-respond($property, $value, $range: $ms-range, $base: $ms-base) {
-  // If there is no responsive config, just output the property and value
-  @if $ms-range == null {
-    #{$property}: ms($value,$base,$ms-ratio);
-  } @else {
-
-    // Initial value
-    #{$property}: ms($value,$base,ms-range(1,1,$range));
-
-    // Loop through breakpoints
-    @for $i from 1 through (length($range) - 1) {
-      @media (min-width: ms-range($i,2,$range)) and (max-width: ms-range($i+1,2,$range)) {
-        #{$property}: ms-respond-calc($value, $i, $range, $base);
-      }
-    }
-
-    // Final breakpoint is just an override value
-    @media (min-width: ms-range(length($range),2,$range)) {
-      #{$property}: ms($value,$base,ms-range(length($range),1,$range));
-    }
-  }
-}

data/magneto/source/assets/bower_components/modular-scale/stylesheets/modular-scale/_round-px.scss

@@ -1,6 +0,0 @@
-@function ms-round-px($Result) {
-  @if unit($Result) == 'px' {
-    @return round($Result);
-  }
-  @return $Result;
-}

data/magneto/source/assets/bower_components/modular-scale/stylesheets/modular-scale/_sort-list.scss

@@ -1,93 +0,0 @@
-// List sorting via a modified merge-sort algorythmn
-// http://en.wikipedia.org/wiki/Merge_sort
-
-@function ms-merge($A, $B) {
-
-  $Return: ();
-
-  // Some empty lists get passed through
-  // so just pass the other list throguh
-  @if length($A) == 0 {
-    @return $B;
-  }
-
-  // If lists fit next to each other, just merge them
-  // This helps performance skipping the need to check each value
-  @if nth($A, length($A)) < nth($B, 1) {
-    @return join($A, $B);
-  }
-  @if nth($B, length($B)) < nth($A, 1) {
-    @return join($B, $A);
-  }
-
-  // Counters start at 1
-  $A-counter: 1;
-  $B-counter: 1;
-
-  // Start looping through all numbers in array
-  @while $A-counter <= length($A) and $B-counter <= length($B) {
-
-    // Check if the A value is smaller
-    // Uses or equal to avoid duplicate numbers
-    @if nth($A, $A-counter) <= nth($B, $B-counter) {
-      $Return: join($Return, nth($A, $A-counter));
-      $A-counter: $A-counter + 1;
-    }
-
-    // Check if the B value is smaller
-    @else if nth($A, $A-counter) > nth($B, $B-counter) {
-      $Return: join($Return, nth($B, $B-counter));
-      $B-counter: $B-counter + 1;
-    }
-  }
-
-  // Run through remainder values in the list
-  @while $A-counter <= length($A) {
-    $Current: nth($A, $A-counter);
-    @if $Current != nth($Return, length($Return)) {
-      $Return: join($Return, $Current);
-    }
-    $A-counter: $A-counter + 1;
-  }
-  @while $B-counter <= length($B) {
-    $Current: nth($B, $B-counter);
-    @if $Current != nth($Return, length($Return)) {
-      $Return: join($Return, $Current);
-    }
-    $B-counter: $B-counter + 1;
-  }
-
-  // Done! return is now sorted and complete
-  @return $Return;
-}
-
-
-
-// Pull it all together
-@function ms-sort-list($Lists) {
-
-  $Return: ();
-
-  @each $List in $Lists {
-    @if $Return == () {
-      $Return: $List;
-    }
-    @else {
-      $Return: ms-merge($List, $Return);
-    }
-  }
-
-  // final cleanup of repeated items
-  $Last: null;
-  $New-list: ();
-  @each $Item in $Return {
-    @if $Item != $Last {
-      $New-list: join($New-list, $Item);
-    }
-    $Last: $Item;
-  }
-  $Return: $New-list;
-
-
-  @return $Return;
-}