getargv 0.3.3-universal-darwin → 0.3.4-universal-darwin

data/vendor/bundle/ruby/3.3.0/gems/rbs-2.8.4/core/regexp.rbs

@@ -1,1224 +0,0 @@
-# <!-- rdoc-file=re.c -->
-# A Regexp holds a regular expression, used to match a pattern against strings.
-# Regexps are created using the `/.../` and `%r{...}` literals, and by the
-# Regexp::new constructor.
-#
-# You can create a Regexp object explicitly with:
-#
-# *   A [regexp literal](doc/syntax/literals_rdoc.html#label-Regexp+Literals).
-#
-#
-# Regular expressions (*regexp*s) are patterns which describe the contents of a
-# string. They're used for testing whether a string contains a given pattern, or
-# extracting the portions that match. They are created with the `/`*pat*`/` and
-# `%r{`*pat*`}` literals or the `Regexp.new` constructor.
-#
-# A regexp is usually delimited with forward slashes (`/`). For example:
-#
-#     /hay/ =~ 'haystack'   #=> 0
-#     /y/.match('haystack') #=> #<MatchData "y">
-#
-# If a string contains the pattern it is said to *match*. A literal string
-# matches itself.
-#
-# Here 'haystack' does not contain the pattern 'needle', so it doesn't match:
-#
-#     /needle/.match('haystack') #=> nil
-#
-# Here 'haystack' contains the pattern 'hay', so it matches:
-#
-#     /hay/.match('haystack')    #=> #<MatchData "hay">
-#
-# Specifically, `/st/` requires that the string contains the letter *s* followed
-# by the letter *t*, so it matches *haystack*, also.
-#
-# ## `=~` and Regexp#match
-#
-# Pattern matching may be achieved by using `=~` operator or Regexp#match
-# method.
-#
-# ### `=~` operator
-#
-# `=~` is Ruby's basic pattern-matching operator.  When one operand is a regular
-# expression and the other is a string then the regular expression is used as a
-# pattern to match against the string.  (This operator is equivalently defined
-# by Regexp and String so the order of String and Regexp do not matter. Other
-# classes may have different implementations of `=~`.)  If a match is found, the
-# operator returns index of first match in string, otherwise it returns `nil`.
-#
-#     /hay/ =~ 'haystack'   #=> 0
-#     'haystack' =~ /hay/   #=> 0
-#     /a/   =~ 'haystack'   #=> 1
-#     /u/   =~ 'haystack'   #=> nil
-#
-# Using `=~` operator with a String and Regexp the `$~` global variable is set
-# after a successful match.  `$~` holds a MatchData object. Regexp.last_match is
-# equivalent to `$~`.
-#
-# ### Regexp#match method
-#
-# The #match method returns a MatchData object:
-#
-#     /st/.match('haystack')   #=> #<MatchData "st">
-#
-# ## Metacharacters and Escapes
-#
-# The following are *metacharacters* `(`, `)`, `[`, `]`, `{`, `}`, `.`, `?`,
-# `+`, `*`. They have a specific meaning when appearing in a pattern. To match
-# them literally they must be backslash-escaped. To match a backslash literally,
-# backslash-escape it: `\\\`.
-#
-#     /1 \+ 2 = 3\?/.match('Does 1 + 2 = 3?') #=> #<MatchData "1 + 2 = 3?">
-#     /a\\\\b/.match('a\\\\b')                    #=> #<MatchData "a\\b">
-#
-# Patterns behave like double-quoted strings and can contain the same backslash
-# escapes (the meaning of `\s` is different, however, see
-# [below](#label-Character+Classes)).
-#
-#     /\s\u{6771 4eac 90fd}/.match("Go to 東京都")
-#         #=> #<MatchData " 東京都">
-#
-# Arbitrary Ruby expressions can be embedded into patterns with the `#{...}`
-# construct.
-#
-#     place = "東京都"
-#     /#{place}/.match("Go to 東京都")
-#         #=> #<MatchData "東京都">
-#
-# ## Character Classes
-#
-# A *character class* is delimited with square brackets (`[`, `]`) and lists
-# characters that may appear at that point in the match. `/[ab]/` means *a* or
-# *b*, as opposed to `/ab/` which means *a* followed by *b*.
-#
-#     /W[aeiou]rd/.match("Word") #=> #<MatchData "Word">
-#
-# Within a character class the hyphen (`-`) is a metacharacter denoting an
-# inclusive range of characters. `[abcd]` is equivalent to `[a-d]`. A range can
-# be followed by another range, so `[abcdwxyz]` is equivalent to `[a-dw-z]`. The
-# order in which ranges or individual characters appear inside a character class
-# is irrelevant.
-#
-#     /[0-9a-f]/.match('9f') #=> #<MatchData "9">
-#     /[9f]/.match('9f')     #=> #<MatchData "9">
-#
-# If the first character of a character class is a caret (`^`) the class is
-# inverted: it matches any character *except* those named.
-#
-#     /[^a-eg-z]/.match('f') #=> #<MatchData "f">
-#
-# A character class may contain another character class. By itself this isn't
-# useful because `[a-z[0-9]]` describes the same set as `[a-z0-9]`. However,
-# character classes also support the `&&` operator which performs set
-# intersection on its arguments. The two can be combined as follows:
-#
-#     /[a-w&&[^c-g]z]/ # ([a-w] AND ([^c-g] OR z))
-#
-# This is equivalent to:
-#
-#     /[abh-w]/
-#
-# The following metacharacters also behave like character classes:
-#
-# *   `/./` - Any character except a newline.
-# *   `/./m` - Any character (the `m` modifier enables multiline mode)
-# *   `/\w/` - A word character (`[a-zA-Z0-9_]`)
-# *   `/\W/` - A non-word character (`[^a-zA-Z0-9_]`). Please take a look at
-#     [Bug #4044](https://bugs.ruby-lang.org/issues/4044) if using `/\W/` with
-#     the `/i` modifier.
-# *   `/\d/` - A digit character (`[0-9]`)
-# *   `/\D/` - A non-digit character (`[^0-9]`)
-# *   `/\h/` - A hexdigit character (`[0-9a-fA-F]`)
-# *   `/\H/` - A non-hexdigit character (`[^0-9a-fA-F]`)
-# *   `/\s/` - A whitespace character: `/[ \t\r\n\f\v]/`
-# *   `/\S/` - A non-whitespace character: `/[^ \t\r\n\f\v]/`
-# *   `/\R/` - A linebreak: `\n`, `\v`, `\f`, `\r` `\u0085` (NEXT LINE),
-#     `\u2028` (LINE SEPARATOR), `\u2029` (PARAGRAPH SEPARATOR) or `\r\n`.
-#
-#
-# POSIX *bracket expressions* are also similar to character classes. They
-# provide a portable alternative to the above, with the added benefit that they
-# encompass non-ASCII characters. For instance, `/\d/` matches only the ASCII
-# decimal digits (0-9); whereas `/[[:digit:]]/` matches any character in the
-# Unicode *Nd* category.
-#
-# *   `/[[:alnum:]]/` - Alphabetic and numeric character
-# *   `/[[:alpha:]]/` - Alphabetic character
-# *   `/[[:blank:]]/` - Space or tab
-# *   `/[[:cntrl:]]/` - Control character
-# *   `/[[:digit:]]/` - Digit
-# *   `/[[:graph:]]/` - Non-blank character (excludes spaces, control
-#     characters, and similar)
-# *   `/[[:lower:]]/` - Lowercase alphabetical character
-# *   `/[[:print:]]/` - Like [:graph:], but includes the space character
-# *   `/[[:punct:]]/` - Punctuation character
-# *   `/[[:space:]]/` - Whitespace character (`[:blank:]`, newline, carriage
-#     return, etc.)
-# *   `/[[:upper:]]/` - Uppercase alphabetical
-# *   `/[[:xdigit:]]/` - Digit allowed in a hexadecimal number (i.e., 0-9a-fA-F)
-#
-#
-# Ruby also supports the following non-POSIX character classes:
-#
-# *   `/[[:word:]]/` - A character in one of the following Unicode general
-#     categories *Letter*, *Mark*, *Number*, *Connector_Punctuation*
-# *   `/[[:ascii:]]/` - A character in the ASCII character set
-#
-#         # U+06F2 is "EXTENDED ARABIC-INDIC DIGIT TWO"
-#         /[[:digit:]]/.match("\u06F2")    #=> #<MatchData "\u{06F2}">
-#         /[[:upper:]][[:lower:]]/.match("Hello") #=> #<MatchData "He">
-#         /[[:xdigit:]][[:xdigit:]]/.match("A6")  #=> #<MatchData "A6">
-#
-#
-# ## Repetition
-#
-# The constructs described so far match a single character. They can be followed
-# by a repetition metacharacter to specify how many times they need to occur.
-# Such metacharacters are called *quantifiers*.
-#
-# *   `*` - Zero or more times
-# *   `+` - One or more times
-# *   `?` - Zero or one times (optional)
-# *   `{`*n*`}` - Exactly *n* times
-# *   `{`*n*`,}` - *n* or more times
-# *   `{,`*m*`}` - *m* or less times
-# *   `{`*n*`,`*m*`}` - At least *n* and at most *m* times
-#
-#
-# At least one uppercase character ('H'), at least one lowercase character
-# ('e'), two 'l' characters, then one 'o':
-#
-#     "Hello".match(/[[:upper:]]+[[:lower:]]+l{2}o/) #=> #<MatchData "Hello">
-#
-# ### Greedy match
-#
-# Repetition is *greedy* by default: as many occurrences as possible are matched
-# while still allowing the overall match to succeed. By contrast, *lazy*
-# matching makes the minimal amount of matches necessary for overall success.
-# Most greedy metacharacters can be made lazy by following them with `?`. For
-# the `{n}` pattern, because it specifies an exact number of characters to match
-# and not a variable number of characters, the `?` metacharacter instead makes
-# the repeated pattern optional.
-#
-# Both patterns below match the string. The first uses a greedy quantifier so
-# '.+' matches '<a><b>'; the second uses a lazy quantifier so '.+?' matches
-# '<a>':
-#
-#     /<.+>/.match("<a><b>")  #=> #<MatchData "<a><b>">
-#     /<.+?>/.match("<a><b>") #=> #<MatchData "<a>">
-#
-# ### Possessive match
-#
-# A quantifier followed by `+` matches *possessively*: once it has matched it
-# does not backtrack. They behave like greedy quantifiers, but having matched
-# they refuse to "give up" their match even if this jeopardises the overall
-# match.
-#
-#     /<.*><.+>/.match("<a><b>") #=> #<MatchData "<a><b>">
-#     /<.*+><.+>/.match("<a><b>") #=> nil
-#     /<.*><.++>/.match("<a><b>") #=> nil
-#
-# ## Capturing
-#
-# Parentheses can be used for *capturing*. The text enclosed by the *n*th group
-# of parentheses can be subsequently referred to with *n*. Within a pattern use
-# the *backreference* `\n` (e.g. `\1`); outside of the pattern use
-# `MatchData[n]` (e.g. `MatchData[1]`).
-#
-# In this example, `'at'` is captured by the first group of parentheses, then
-# referred to later with `\1`:
-#
-#     /[csh](..) [csh]\1 in/.match("The cat sat in the hat")
-#         #=> #<MatchData "cat sat in" 1:"at">
-#
-# Regexp#match returns a MatchData object which makes the captured text
-# available with its #[] method:
-#
-#     /[csh](..) [csh]\1 in/.match("The cat sat in the hat")[1] #=> 'at'
-#
-# While Ruby supports an arbitrary number of numbered captured groups, only
-# groups 1-9 are supported using the `\n` backreference syntax.
-#
-# Ruby also supports `\0` as a special backreference, which references the
-# entire matched string.  This is also available at `MatchData[0]`.  Note that
-# the `\0` backreference cannot be used inside the regexp, as backreferences can
-# only be used after the end of the capture group, and the `\0` backreference
-# uses the implicit capture group of the entire match.  However, you can use
-# this backreference when doing substitution:
-#
-#     "The cat sat in the hat".gsub(/[csh]at/, '\0s')
-#       # => "The cats sats in the hats"
-#
-# ### Named captures
-#
-# Capture groups can be referred to by name when defined with the
-# `(?<`*name*`>)` or `(?'`*name*`')` constructs.
-#
-#     /\$(?<dollars>\d+)\.(?<cents>\d+)/.match("$3.67")
-#         #=> #<MatchData "$3.67" dollars:"3" cents:"67">
-#     /\$(?<dollars>\d+)\.(?<cents>\d+)/.match("$3.67")[:dollars] #=> "3"
-#
-# Named groups can be backreferenced with `\k<`*name*`>`, where *name* is the
-# group name.
-#
-#     /(?<vowel>[aeiou]).\k<vowel>.\k<vowel>/.match('ototomy')
-#         #=> #<MatchData "ototo" vowel:"o">
-#
-# **Note**: A regexp can't use named backreferences and numbered backreferences
-# simultaneously. Also, if a named capture is used in a regexp, then parentheses
-# used for grouping which would otherwise result in a unnamed capture are
-# treated as non-capturing.
-#
-#     /(\w)(\w)/.match("ab").captures # => ["a", "b"]
-#     /(\w)(\w)/.match("ab").named_captures # => {}
-#
-#     /(?<c>\w)(\w)/.match("ab").captures # => ["a"]
-#     /(?<c>\w)(\w)/.match("ab").named_captures # => {"c"=>"a"}
-#
-# When named capture groups are used with a literal regexp on the left-hand side
-# of an expression and the `=~` operator, the captured text is also assigned to
-# local variables with corresponding names.
-#
-#     /\$(?<dollars>\d+)\.(?<cents>\d+)/ =~ "$3.67" #=> 0
-#     dollars #=> "3"
-#
-# ## Grouping
-#
-# Parentheses also *group* the terms they enclose, allowing them to be
-# quantified as one *atomic* whole.
-#
-# The pattern below matches a vowel followed by 2 word characters:
-#
-#     /[aeiou]\w{2}/.match("Caenorhabditis elegans") #=> #<MatchData "aen">
-#
-# Whereas the following pattern matches a vowel followed by a word character,
-# twice, i.e. `[aeiou]\w[aeiou]\w`: 'enor'.
-#
-#     /([aeiou]\w){2}/.match("Caenorhabditis elegans")
-#         #=> #<MatchData "enor" 1:"or">
-#
-# The `(?:`...`)` construct provides grouping without capturing. That is, it
-# combines the terms it contains into an atomic whole without creating a
-# backreference. This benefits performance at the slight expense of readability.
-#
-# The first group of parentheses captures 'n' and the second 'ti'. The second
-# group is referred to later with the backreference `\2`:
-#
-#     /I(n)ves(ti)ga\2ons/.match("Investigations")
-#         #=> #<MatchData "Investigations" 1:"n" 2:"ti">
-#
-# The first group of parentheses is now made non-capturing with '?:', so it
-# still matches 'n', but doesn't create the backreference. Thus, the
-# backreference `\1` now refers to 'ti'.
-#
-#     /I(?:n)ves(ti)ga\1ons/.match("Investigations")
-#         #=> #<MatchData "Investigations" 1:"ti">
-#
-# ### Atomic Grouping
-#
-# Grouping can be made *atomic* with `(?>`*pat*`)`. This causes the
-# subexpression *pat* to be matched independently of the rest of the expression
-# such that what it matches becomes fixed for the remainder of the match, unless
-# the entire subexpression must be abandoned and subsequently revisited. In this
-# way *pat* is treated as a non-divisible whole. Atomic grouping is typically
-# used to optimise patterns so as to prevent the regular expression engine from
-# backtracking needlessly.
-#
-# The `"` in the pattern below matches the first character of the string, then
-# `.*` matches *Quote"*. This causes the overall match to fail, so the text
-# matched by `.*` is backtracked by one position, which leaves the final
-# character of the string available to match `"`
-#
-#     /".*"/.match('"Quote"')     #=> #<MatchData "\"Quote\"">
-#
-# If `.*` is grouped atomically, it refuses to backtrack *Quote"*, even though
-# this means that the overall match fails
-#
-#     /"(?>.*)"/.match('"Quote"') #=> nil
-#
-# ## Subexpression Calls
-#
-# The `\g<`*name*`>` syntax matches the previous subexpression named *name*,
-# which can be a group name or number, again. This differs from backreferences
-# in that it re-executes the group rather than simply trying to re-match the
-# same text.
-#
-# This pattern matches a *(* character and assigns it to the `paren` group,
-# tries to call that the `paren` sub-expression again but fails, then matches a
-# literal *)*:
-#
-#     /\A(?<paren>\(\g<paren>*\))*\z/ =~ '()'
-#
-#     /\A(?<paren>\(\g<paren>*\))*\z/ =~ '(())' #=> 0
-#     # ^1
-#     #      ^2
-#     #           ^3
-#     #                 ^4
-#     #      ^5
-#     #           ^6
-#     #                      ^7
-#     #                       ^8
-#     #                       ^9
-#     #                           ^10
-#
-# 1.  Matches at the beginning of the string, i.e. before the first character.
-# 2.  Enters a named capture group called `paren`
-# 3.  Matches a literal *(*, the first character in the string
-# 4.  Calls the `paren` group again, i.e. recurses back to the second step
-# 5.  Re-enters the `paren` group
-# 6.  Matches a literal *(*, the second character in the string
-# 7.  Try to call `paren` a third time, but fail because doing so would prevent
-#     an overall successful match
-# 8.  Match a literal *)*, the third character in the string. Marks the end of
-#     the second recursive call
-# 9.  Match a literal *)*, the fourth character in the string
-# 10. Match the end of the string
-#
-#
-# ## Alternation
-#
-# The vertical bar metacharacter (`|`) combines several expressions into a
-# single one that matches any of the expressions. Each expression is an
-# *alternative*.
-#
-#     /\w(and|or)\w/.match("Feliformia") #=> #<MatchData "form" 1:"or">
-#     /\w(and|or)\w/.match("furandi")    #=> #<MatchData "randi" 1:"and">
-#     /\w(and|or)\w/.match("dissemblance") #=> nil
-#
-# ## Character Properties
-#
-# The `\p{}` construct matches characters with the named property, much like
-# POSIX bracket classes.
-#
-# *   `/\p{Alnum}/` - Alphabetic and numeric character
-# *   `/\p{Alpha}/` - Alphabetic character
-# *   `/\p{Blank}/` - Space or tab
-# *   `/\p{Cntrl}/` - Control character
-# *   `/\p{Digit}/` - Digit
-# *   `/\p{Graph}/` - Non-blank character (excludes spaces, control characters,
-#     and similar)
-# *   `/\p{Lower}/` - Lowercase alphabetical character
-# *   `/\p{Print}/` - Like `\p{Graph}`, but includes the space character
-# *   `/\p{Punct}/` - Punctuation character
-# *   `/\p{Space}/` - Whitespace character (`[:blank:]`, newline, carriage
-#     return, etc.)
-# *   `/\p{Upper}/` - Uppercase alphabetical
-# *   `/\p{XDigit}/` - Digit allowed in a hexadecimal number (i.e., 0-9a-fA-F)
-# *   `/\p{Word}/` - A member of one of the following Unicode general category
-#     *Letter*, *Mark*, *Number*, *Connector_Punctuation*
-# *   `/\p{ASCII}/` - A character in the ASCII character set
-# *   `/\p{Any}/` - Any Unicode character (including unassigned characters)
-# *   `/\p{Assigned}/` - An assigned character
-#
-#
-# A Unicode character's *General Category* value can also be matched with
-# `\p{`*Ab*`}` where *Ab* is the category's abbreviation as described below:
-#
-# *   `/\p{L}/` - 'Letter'
-# *   `/\p{Ll}/` - 'Letter: Lowercase'
-# *   `/\p{Lm}/` - 'Letter: Mark'
-# *   `/\p{Lo}/` - 'Letter: Other'
-# *   `/\p{Lt}/` - 'Letter: Titlecase'
-# *   `/\p{Lu}/` - 'Letter: Uppercase
-# *   `/\p{Lo}/` - 'Letter: Other'
-# *   `/\p{M}/` - 'Mark'
-# *   `/\p{Mn}/` - 'Mark: Nonspacing'
-# *   `/\p{Mc}/` - 'Mark: Spacing Combining'
-# *   `/\p{Me}/` - 'Mark: Enclosing'
-# *   `/\p{N}/` - 'Number'
-# *   `/\p{Nd}/` - 'Number: Decimal Digit'
-# *   `/\p{Nl}/` - 'Number: Letter'
-# *   `/\p{No}/` - 'Number: Other'
-# *   `/\p{P}/` - 'Punctuation'
-# *   `/\p{Pc}/` - 'Punctuation: Connector'
-# *   `/\p{Pd}/` - 'Punctuation: Dash'
-# *   `/\p{Ps}/` - 'Punctuation: Open'
-# *   `/\p{Pe}/` - 'Punctuation: Close'
-# *   `/\p{Pi}/` - 'Punctuation: Initial Quote'
-# *   `/\p{Pf}/` - 'Punctuation: Final Quote'
-# *   `/\p{Po}/` - 'Punctuation: Other'
-# *   `/\p{S}/` - 'Symbol'
-# *   `/\p{Sm}/` - 'Symbol: Math'
-# *   `/\p{Sc}/` - 'Symbol: Currency'
-# *   `/\p{Sc}/` - 'Symbol: Currency'
-# *   `/\p{Sk}/` - 'Symbol: Modifier'
-# *   `/\p{So}/` - 'Symbol: Other'
-# *   `/\p{Z}/` - 'Separator'
-# *   `/\p{Zs}/` - 'Separator: Space'
-# *   `/\p{Zl}/` - 'Separator: Line'
-# *   `/\p{Zp}/` - 'Separator: Paragraph'
-# *   `/\p{C}/` - 'Other'
-# *   `/\p{Cc}/` - 'Other: Control'
-# *   `/\p{Cf}/` - 'Other: Format'
-# *   `/\p{Cn}/` - 'Other: Not Assigned'
-# *   `/\p{Co}/` - 'Other: Private Use'
-# *   `/\p{Cs}/` - 'Other: Surrogate'
-#
-#
-# Lastly, `\p{}` matches a character's Unicode *script*. The following scripts
-# are supported: *Arabic*, *Armenian*, *Balinese*, *Bengali*, *Bopomofo*,
-# *Braille*, *Buginese*, *Buhid*, *Canadian_Aboriginal*, *Carian*, *Cham*,
-# *Cherokee*, *Common*, *Coptic*, *Cuneiform*, *Cypriot*, *Cyrillic*, *Deseret*,
-# *Devanagari*, *Ethiopic*, *Georgian*, *Glagolitic*, *Gothic*, *Greek*,
-# *Gujarati*, *Gurmukhi*, *Han*, *Hangul*, *Hanunoo*, *Hebrew*, *Hiragana*,
-# *Inherited*, *Kannada*, *Katakana*, *Kayah_Li*, *Kharoshthi*, *Khmer*, *Lao*,
-# *Latin*, *Lepcha*, *Limbu*, *Linear_B*, *Lycian*, *Lydian*, *Malayalam*,
-# *Mongolian*, *Myanmar*, *New_Tai_Lue*, *Nko*, *Ogham*, *Ol_Chiki*,
-# *Old_Italic*, *Old_Persian*, *Oriya*, *Osmanya*, *Phags_Pa*, *Phoenician*,
-# *Rejang*, *Runic*, *Saurashtra*, *Shavian*, *Sinhala*, *Sundanese*,
-# *Syloti_Nagri*, *Syriac*, *Tagalog*, *Tagbanwa*, *Tai_Le*, *Tamil*, *Telugu*,
-# *Thaana*, *Thai*, *Tibetan*, *Tifinagh*, *Ugaritic*, *Vai*, and *Yi*.
-#
-# Unicode codepoint U+06E9 is named "ARABIC PLACE OF SAJDAH" and belongs to the
-# Arabic script:
-#
-#     /\p{Arabic}/.match("\u06E9") #=> #<MatchData "\u06E9">
-#
-# All character properties can be inverted by prefixing their name with a caret
-# (`^`).
-#
-# Letter 'A' is not in the Unicode Ll (Letter; Lowercase) category, so this
-# match succeeds:
-#
-#     /\p{^Ll}/.match("A") #=> #<MatchData "A">
-#
-# ## Anchors
-#
-# Anchors are metacharacter that match the zero-width positions between
-# characters, *anchoring* the match to a specific position.
-#
-# *   `^` - Matches beginning of line
-# *   `$` - Matches end of line
-# *   `\A` - Matches beginning of string.
-# *   `\Z` - Matches end of string. If string ends with a newline, it matches
-#     just before newline
-# *   `\z` - Matches end of string
-# *   `\G` - Matches first matching position:
-#
-#     In methods like `String#gsub` and `String#scan`, it changes on each
-#     iteration. It initially matches the beginning of subject, and in each
-#     following iteration it matches where the last match finished.
-#
-#         "    a b c".gsub(/ /, '_')    #=> "____a_b_c"
-#         "    a b c".gsub(/\G /, '_')  #=> "____a b c"
-#
-#     In methods like `Regexp#match` and `String#match` that take an (optional)
-#     offset, it matches where the search begins.
-#
-#         "hello, world".match(/,/, 3)    #=> #<MatchData ",">
-#         "hello, world".match(/\G,/, 3)  #=> nil
-#
-# *   `\b` - Matches word boundaries when outside brackets; backspace (0x08)
-#     when inside brackets
-# *   `\B` - Matches non-word boundaries
-# *   `(?=`*pat*`)` - *Positive lookahead* assertion: ensures that the following
-#     characters match *pat*, but doesn't include those characters in the
-#     matched text
-# *   `(?!`*pat*`)` - *Negative lookahead* assertion: ensures that the following
-#     characters do not match *pat*, but doesn't include those characters in the
-#     matched text
-# *   `(?<=`*pat*`)` - *Positive lookbehind* assertion: ensures that the
-#     preceding characters match *pat*, but doesn't include those characters in
-#     the matched text
-# *   `(?<!`*pat*`)` - *Negative lookbehind* assertion: ensures that the
-#     preceding characters do not match *pat*, but doesn't include those
-#     characters in the matched text
-# *   `\K` - Uses an positive lookbehind of the content preceding `\K` in the
-#     regexp.  For example, the following two regexps are almost equivalent:
-#
-#         /ab\Kc/
-#         /(?<=ab)c/
-#
-#     As are the following two regexps:
-#
-#         /(a)\K(b)\Kc/
-#         /(?<=(?<=(a))(b))c/
-#
-#
-# If a pattern isn't anchored it can begin at any point in the string:
-#
-#     /real/.match("surrealist") #=> #<MatchData "real">
-#
-# Anchoring the pattern to the beginning of the string forces the match to start
-# there. 'real' doesn't occur at the beginning of the string, so now the match
-# fails:
-#
-#     /\Areal/.match("surrealist") #=> nil
-#
-# The match below fails because although 'Demand' contains 'and', the pattern
-# does not occur at a word boundary.
-#
-#     /\band/.match("Demand")
-#
-# Whereas in the following example 'and' has been anchored to a non-word
-# boundary so instead of matching the first 'and' it matches from the fourth
-# letter of 'demand' instead:
-#
-#     /\Band.+/.match("Supply and demand curve") #=> #<MatchData "and curve">
-#
-# The pattern below uses positive lookahead and positive lookbehind to match
-# text appearing in  tags without including the tags in the match:
-#
-#     /(?<=<b>)\w+(?=<\/b>)/.match("Fortune favours the <b>bold</b>")
-#         #=> #<MatchData "bold">
-#
-# ## Options
-#
-# The end delimiter for a regexp can be followed by one or more single-letter
-# options which control how the pattern can match.
-#
-# *   `/pat/i` - Ignore case
-# *   `/pat/m` - Treat a newline as a character matched by `.`
-# *   `/pat/x` - Ignore whitespace and comments in the pattern
-# *   `/pat/o` - Perform `#{}` interpolation only once
-#
-#
-# `i`, `m`, and `x` can also be applied on the subexpression level with the
-# `(?`*on*`-`*off*`)` construct, which enables options *on*, and disables
-# options *off* for the expression enclosed by the parentheses:
-#
-#     /a(?i:b)c/.match('aBc')   #=> #<MatchData "aBc">
-#     /a(?-i:b)c/i.match('ABC') #=> nil
-#
-# Additionally, these options can also be toggled for the remainder of the
-# pattern:
-#
-#     /a(?i)bc/.match('abC') #=> #<MatchData "abC">
-#
-# Options may also be used with `Regexp.new`:
-#
-#     Regexp.new("abc", Regexp::IGNORECASE)                     #=> /abc/i
-#     Regexp.new("abc", Regexp::MULTILINE)                      #=> /abc/m
-#     Regexp.new("abc # Comment", Regexp::EXTENDED)             #=> /abc # Comment/x
-#     Regexp.new("abc", Regexp::IGNORECASE | Regexp::MULTILINE) #=> /abc/mi
-#
-# ## Free-Spacing Mode and Comments
-#
-# As mentioned above, the `x` option enables *free-spacing* mode. Literal white
-# space inside the pattern is ignored, and the octothorpe (`#`) character
-# introduces a comment until the end of the line. This allows the components of
-# the pattern to be organized in a potentially more readable fashion.
-#
-# A contrived pattern to match a number with optional decimal places:
-#
-#     float_pat = /\A
-#         [[:digit:]]+ # 1 or more digits before the decimal point
-#         (\.          # Decimal point
-#             [[:digit:]]+ # 1 or more digits after the decimal point
-#         )? # The decimal point and following digits are optional
-#     \Z/x
-#     float_pat.match('3.14') #=> #<MatchData "3.14" 1:".14">
-#
-# There are a number of strategies for matching whitespace:
-#
-# *   Use a pattern such as `\s` or `\p{Space}`.
-# *   Use escaped whitespace such as `\ `, i.e. a space preceded by a backslash.
-# *   Use a character class such as `[ ]`.
-#
-#
-# Comments can be included in a non-`x` pattern with the `(?#`*comment*`)`
-# construct, where *comment* is arbitrary text ignored by the regexp engine.
-#
-# Comments in regexp literals cannot include unescaped terminator characters.
-#
-# ## Encoding
-#
-# Regular expressions are assumed to use the source encoding. This can be
-# overridden with one of the following modifiers.
-#
-# *   `/`*pat*`/u` - UTF-8
-# *   `/`*pat*`/e` - EUC-JP
-# *   `/`*pat*`/s` - Windows-31J
-# *   `/`*pat*`/n` - ASCII-8BIT
-#
-#
-# A regexp can be matched against a string when they either share an encoding,
-# or the regexp's encoding is *US-ASCII* and the string's encoding is
-# ASCII-compatible.
-#
-# If a match between incompatible encodings is attempted an
-# `Encoding::CompatibilityError` exception is raised.
-#
-# The `Regexp#fixed_encoding?` predicate indicates whether the regexp has a
-# *fixed* encoding, that is one incompatible with ASCII. A regexp's encoding can
-# be explicitly fixed by supplying `Regexp::FIXEDENCODING` as the second
-# argument of `Regexp.new`:
-#
-#     r = Regexp.new("a".force_encoding("iso-8859-1"),Regexp::FIXEDENCODING)
-#     r =~ "a\u3042"
-#        # raises Encoding::CompatibilityError: incompatible encoding regexp match
-#        #         (ISO-8859-1 regexp with UTF-8 string)
-#
-# ## Special global variables
-#
-# Pattern matching sets some global variables :
-# *   `$~` is equivalent to Regexp.last_match;
-# *   `$&` contains the complete matched text;
-# *   `$`` contains string before match;
-# *   `$'` contains string after match;
-# *   `$1`, `$2` and so on contain text matching first, second, etc capture
-#     group;
-# *   `$+` contains last capture group.
-#
-#
-# Example:
-#
-#     m = /s(\w{2}).*(c)/.match('haystack') #=> #<MatchData "stac" 1:"ta" 2:"c">
-#     $~                                    #=> #<MatchData "stac" 1:"ta" 2:"c">
-#     Regexp.last_match                     #=> #<MatchData "stac" 1:"ta" 2:"c">
-#
-#     $&      #=> "stac"
-#             # same as m[0]
-#     $`      #=> "hay"
-#             # same as m.pre_match
-#     $'      #=> "k"
-#             # same as m.post_match
-#     $1      #=> "ta"
-#             # same as m[1]
-#     $2      #=> "c"
-#             # same as m[2]
-#     $3      #=> nil
-#             # no third group in pattern
-#     $+      #=> "c"
-#             # same as m[-1]
-#
-# These global variables are thread-local and method-local variables.
-#
-# ## Performance
-#
-# Certain pathological combinations of constructs can lead to abysmally bad
-# performance.
-#
-# Consider a string of 25 *a*s, a *d*, 4 *a*s, and a *c*.
-#
-#     s = 'a' * 25 + 'd' + 'a' * 4 + 'c'
-#     #=> "aaaaaaaaaaaaaaaaaaaaaaaaadaaaac"
-#
-# The following patterns match instantly as you would expect:
-#
-#     /(b|a)/ =~ s #=> 0
-#     /(b|a+)/ =~ s #=> 0
-#     /(b|a+)*/ =~ s #=> 0
-#
-# However, the following pattern takes appreciably longer:
-#
-#     /(b|a+)*c/ =~ s #=> 26
-#
-# This happens because an atom in the regexp is quantified by both an immediate
-# `+` and an enclosing `*` with nothing to differentiate which is in control of
-# any particular character. The nondeterminism that results produces
-# super-linear performance. (Consult *Mastering Regular Expressions* (3rd ed.),
-# pp 222, by *Jeffery Friedl*, for an in-depth analysis). This particular case
-# can be fixed by use of atomic grouping, which prevents the unnecessary
-# backtracking:
-#
-#     (start = Time.now) && /(b|a+)*c/ =~ s && (Time.now - start)
-#        #=> 24.702736882
-#     (start = Time.now) && /(?>b|a+)*c/ =~ s && (Time.now - start)
-#        #=> 0.000166571
-#
-# A similar case is typified by the following example, which takes approximately
-# 60 seconds to execute for me:
-#
-# Match a string of 29 *a*s against a pattern of 29 optional *a*s followed by 29
-# mandatory *a*s:
-#
-#     Regexp.new('a?' * 29 + 'a' * 29) =~ 'a' * 29
-#
-# The 29 optional *a*s match the string, but this prevents the 29 mandatory *a*s
-# that follow from matching. Ruby must then backtrack repeatedly so as to
-# satisfy as many of the optional matches as it can while still matching the
-# mandatory 29. It is plain to us that none of the optional matches can succeed,
-# but this fact unfortunately eludes Ruby.
-#
-# The best way to improve performance is to significantly reduce the amount of
-# backtracking needed.  For this case, instead of individually matching 29
-# optional *a*s, a range of optional *a*s can be matched all at once with
-# *a{0,29}*:
-#
-#     Regexp.new('a{0,29}' + 'a' * 29) =~ 'a' * 29
-#
-class Regexp
-  # <!--
-  #   rdoc-file=re.c
-  #   - Regexp.new(string, [options])       -> regexp
-  #   - Regexp.new(regexp)                  -> regexp
-  #   - Regexp.compile(string, [options])   -> regexp
-  #   - Regexp.compile(regexp)              -> regexp
-  # -->
-  # Constructs a new regular expression from `pattern`, which can be either a
-  # String or a Regexp (in which case that regexp's options are propagated), and
-  # new options may not be specified (a change as of Ruby 1.8).
-  #
-  # If `options` is an Integer, it should be one or more of the constants
-  # Regexp::EXTENDED, Regexp::IGNORECASE, and Regexp::MULTILINE, *or*-ed together.
-  #  Otherwise, if `options` is not `nil` or `false`, the regexp will be case
-  # insensitive.
-  #
-  #     r1 = Regexp.new('^a-z+:\\s+\w+') #=> /^a-z+:\s+\w+/
-  #     r2 = Regexp.new('cat', true)     #=> /cat/i
-  #     r3 = Regexp.new(r2)              #=> /cat/i
-  #     r4 = Regexp.new('dog', Regexp::EXTENDED | Regexp::IGNORECASE) #=> /dog/ix
-  #
-  def initialize: (String string, ?Integer | nil | false | top options, ?String kcode) -> Object
-                | (Regexp regexp) -> void
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - compile(*args)
-  # -->
-  # Alias for Regexp.new
-  #
-  alias self.compile self.new
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - Regexp.escape(str)   -> string
-  #   - Regexp.quote(str)    -> string
-  # -->
-  # Escapes any characters that would have special meaning in a regular
-  # expression. Returns a new escaped string with the same or compatible encoding.
-  # For any string, `Regexp.new(Regexp.escape(*str*))=~*str`* will be true.
-  #
-  #     Regexp.escape('\*?{}.')   #=> \\\*\?\{\}\.
-  #
-  def self.escape: (String | Symbol str) -> String
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - Regexp.last_match           -> matchdata
-  #   - Regexp.last_match(n)        -> str
-  # -->
-  # The first form returns the MatchData object generated by the last successful
-  # pattern match.  Equivalent to reading the special global variable `$~` (see
-  # Special global variables in Regexp for details).
-  #
-  # The second form returns the *n*th field in this MatchData object. *n* can be a
-  # string or symbol to reference a named capture.
-  #
-  # Note that the last_match is local to the thread and method scope of the method
-  # that did the pattern match.
-  #
-  #     /c(.)t/ =~ 'cat'        #=> 0
-  #     Regexp.last_match       #=> #<MatchData "cat" 1:"a">
-  #     Regexp.last_match(0)    #=> "cat"
-  #     Regexp.last_match(1)    #=> "a"
-  #     Regexp.last_match(2)    #=> nil
-  #
-  #     /(?<lhs>\w+)\s*=\s*(?<rhs>\w+)/ =~ "var = val"
-  #     Regexp.last_match       #=> #<MatchData "var = val" lhs:"var" rhs:"val">
-  #     Regexp.last_match(:lhs) #=> "var"
-  #     Regexp.last_match(:rhs) #=> "val"
-  #
-  def self.last_match: () -> MatchData?
-                     | (Integer n) -> String?
-                     | (Symbol | String n) -> String?
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - Regexp.escape(str)   -> string
-  #   - Regexp.quote(str)    -> string
-  # -->
-  # Escapes any characters that would have special meaning in a regular
-  # expression. Returns a new escaped string with the same or compatible encoding.
-  # For any string, `Regexp.new(Regexp.escape(*str*))=~*str`* will be true.
-  #
-  #     Regexp.escape('\*?{}.')   #=> \\\*\?\{\}\.
-  #
-  def self.quote: (String | Symbol str) -> String
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - Regexp.try_convert(obj) -> re or nil
-  # -->
-  # Try to convert *obj* into a Regexp, using to_regexp method. Returns converted
-  # regexp or nil if *obj* cannot be converted for any reason.
-  #
-  #     Regexp.try_convert(/re/)         #=> /re/
-  #     Regexp.try_convert("re")         #=> nil
-  #
-  #     o = Object.new
-  #     Regexp.try_convert(o)            #=> nil
-  #     def o.to_regexp() /foo/ end
-  #     Regexp.try_convert(o)            #=> /foo/
-  #
-  def self.try_convert: (untyped obj) -> Regexp?
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - Regexp.union(pat1, pat2, ...)            -> new_regexp
-  #   - Regexp.union(pats_ary)                   -> new_regexp
-  # -->
-  # Return a Regexp object that is the union of the given *pattern*s, i.e., will
-  # match any of its parts. The *pattern*s can be Regexp objects, in which case
-  # their options will be preserved, or Strings. If no patterns are given, returns
-  # `/(?!)/`.  The behavior is unspecified if any given *pattern* contains
-  # capture.
-  #
-  #     Regexp.union                         #=> /(?!)/
-  #     Regexp.union("penzance")             #=> /penzance/
-  #     Regexp.union("a+b*c")                #=> /a\+b\*c/
-  #     Regexp.union("skiing", "sledding")   #=> /skiing|sledding/
-  #     Regexp.union(["skiing", "sledding"]) #=> /skiing|sledding/
-  #     Regexp.union(/dogs/, /cats/i)        #=> /(?-mix:dogs)|(?i-mx:cats)/
-  #
-  # Note: the arguments for ::union will try to be converted into a regular
-  # expression literal via #to_regexp.
-  #
-  def self.union: () -> Regexp
-                | (String | Regexp pat1, *String | Regexp pat2) -> Regexp
-                | (::Array[String | Regexp]) -> Regexp
-
-  public
-
-  # <!-- rdoc-file=re.c -->
-  # Equality---Two regexps are equal if their patterns are identical, they have
-  # the same character set code, and their `casefold?` values are the same.
-  #
-  #     /abc/  == /abc/x   #=> false
-  #     /abc/  == /abc/i   #=> false
-  #     /abc/  == /abc/u   #=> false
-  #     /abc/u == /abc/n   #=> false
-  #
-  def ==: (untyped other) -> bool
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - rxp === str   -> true or false
-  # -->
-  # Case Equality---Used in case statements.
-  #
-  #     a = "HELLO"
-  #     case a
-  #     when /\A[a-z]*\z/; print "Lower case\n"
-  #     when /\A[A-Z]*\z/; print "Upper case\n"
-  #     else;              print "Mixed case\n"
-  #     end
-  #     #=> "Upper case"
-  #
-  # Following a regular expression literal with the #=== operator allows you to
-  # compare against a String.
-  #
-  #     /^[a-z]*$/ === "HELLO" #=> false
-  #     /^[A-Z]*$/ === "HELLO" #=> true
-  #
-  def ===: (untyped other) -> bool
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - rxp =~ str    -> integer or nil
-  # -->
-  # Match---Matches *rxp* against *str*.
-  #
-  #     /at/ =~ "input data"   #=> 7
-  #     /ax/ =~ "input data"   #=> nil
-  #
-  # If `=~` is used with a regexp literal with named captures, captured strings
-  # (or nil) is assigned to local variables named by the capture names.
-  #
-  #     /(?<lhs>\w+)\s*=\s*(?<rhs>\w+)/ =~ "  x = y  "
-  #     p lhs    #=> "x"
-  #     p rhs    #=> "y"
-  #
-  # If it is not matched, nil is assigned for the variables.
-  #
-  #     /(?<lhs>\w+)\s*=\s*(?<rhs>\w+)/ =~ "  x = "
-  #     p lhs    #=> nil
-  #     p rhs    #=> nil
-  #
-  # This assignment is implemented in the Ruby parser. The parser detects
-  # 'regexp-literal =~ expression' for the assignment. The regexp must be a
-  # literal without interpolation and placed at left hand side.
-  #
-  # The assignment does not occur if the regexp is not a literal.
-  #
-  #     re = /(?<lhs>\w+)\s*=\s*(?<rhs>\w+)/
-  #     re =~ "  x = y  "
-  #     p lhs    # undefined local variable
-  #     p rhs    # undefined local variable
-  #
-  # A regexp interpolation, `#{}`, also disables the assignment.
-  #
-  #     rhs_pat = /(?<rhs>\w+)/
-  #     /(?<lhs>\w+)\s*=\s*#{rhs_pat}/ =~ "x = y"
-  #     p lhs    # undefined local variable
-  #
-  # The assignment does not occur if the regexp is placed at the right hand side.
-  #
-  #     "  x = y  " =~ /(?<lhs>\w+)\s*=\s*(?<rhs>\w+)/
-  #     p lhs, rhs # undefined local variable
-  #
-  def =~: (String? str) -> Integer?
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - rxp.casefold?   -> true or false
-  # -->
-  # Returns the value of the case-insensitive flag.
-  #
-  #     /a/.casefold?           #=> false
-  #     /a/i.casefold?          #=> true
-  #     /(?i:a)/.casefold?      #=> false
-  #
-  def casefold?: () -> bool
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - obj.encoding   -> encoding
-  # -->
-  # Returns the Encoding object that represents the encoding of obj.
-  #
-  def encoding: () -> Encoding
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - rxp == other_rxp      -> true or false
-  #   - rxp.eql?(other_rxp)   -> true or false
-  # -->
-  # Equality---Two regexps are equal if their patterns are identical, they have
-  # the same character set code, and their `casefold?` values are the same.
-  #
-  #     /abc/  == /abc/x   #=> false
-  #     /abc/  == /abc/i   #=> false
-  #     /abc/  == /abc/u   #=> false
-  #     /abc/u == /abc/n   #=> false
-  #
-  def eql?: (untyped other) -> bool
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - rxp.fixed_encoding?   -> true or false
-  # -->
-  # Returns false if rxp is applicable to a string with any ASCII compatible
-  # encoding. Returns true otherwise.
-  #
-  #     r = /a/
-  #     r.fixed_encoding?                               #=> false
-  #     r =~ "\u{6666} a"                               #=> 2
-  #     r =~ "\xa1\xa2 a".force_encoding("euc-jp")      #=> 2
-  #     r =~ "abc".force_encoding("euc-jp")             #=> 0
-  #
-  #     r = /a/u
-  #     r.fixed_encoding?                               #=> true
-  #     r.encoding                                      #=> #<Encoding:UTF-8>
-  #     r =~ "\u{6666} a"                               #=> 2
-  #     r =~ "\xa1\xa2".force_encoding("euc-jp")        #=> Encoding::CompatibilityError
-  #     r =~ "abc".force_encoding("euc-jp")             #=> 0
-  #
-  #     r = /\u{6666}/
-  #     r.fixed_encoding?                               #=> true
-  #     r.encoding                                      #=> #<Encoding:UTF-8>
-  #     r =~ "\u{6666} a"                               #=> 0
-  #     r =~ "\xa1\xa2".force_encoding("euc-jp")        #=> Encoding::CompatibilityError
-  #     r =~ "abc".force_encoding("euc-jp")             #=> nil
-  #
-  def fixed_encoding?: () -> bool
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - rxp.hash   -> integer
-  # -->
-  # Produce a hash based on the text and options of this regular expression.
-  #
-  # See also Object#hash.
-  #
-  def hash: () -> Integer
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - rxp.inspect   -> string
-  # -->
-  # Produce a nicely formatted string-version of *rxp*. Perhaps surprisingly,
-  # `#inspect` actually produces the more natural version of the string than
-  # `#to_s`.
-  #
-  #     /ab+c/ix.inspect        #=> "/ab+c/ix"
-  #
-  def inspect: () -> String
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - rxp.match(str, pos=0)                   -> matchdata or nil
-  #   - rxp.match(str, pos=0) {|match| block }  -> obj
-  # -->
-  # Returns a MatchData object describing the match, or `nil` if there was no
-  # match. This is equivalent to retrieving the value of the special variable `$~`
-  # following a normal match.  If the second parameter is present, it specifies
-  # the position in the string to begin the search.
-  #
-  #     /(.)(.)(.)/.match("abc")[2]   #=> "b"
-  #     /(.)(.)/.match("abc", 1)[2]   #=> "c"
-  #
-  # If a block is given, invoke the block with MatchData if match succeed, so that
-  # you can write
-  #
-  #     /M(.*)/.match("Matz") do |m|
-  #       puts m[0]
-  #       puts m[1]
-  #     end
-  #
-  # instead of
-  #
-  #     if m = /M(.*)/.match("Matz")
-  #       puts m[0]
-  #       puts m[1]
-  #     end
-  #
-  # The return value is a value from block execution in this case.
-  #
-  def match: (String? | Symbol | _ToStr str, ?Integer pos) -> MatchData?
-           | [T] (String? | Symbol | _ToStr str, ?Integer pos) { (MatchData) -> T } -> T?
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - rxp.match?(str)          -> true or false
-  #   - rxp.match?(str, pos=0)   -> true or false
-  # -->
-  # Returns `true` or `false` to indicate whether the regexp is matched or not
-  # without updating $~ and other related variables. If the second parameter is
-  # present, it specifies the position in the string to begin the search.
-  #
-  #     /R.../.match?("Ruby")    #=> true
-  #     /R.../.match?("Ruby", 1) #=> false
-  #     /P.../.match?("Ruby")    #=> false
-  #     $&                       #=> nil
-  #
-  def match?: (String? | Symbol | _ToStr str, ?Integer pos) -> bool
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - rxp.named_captures  -> hash
-  # -->
-  # Returns a hash representing information about named captures of *rxp*.
-  #
-  # A key of the hash is a name of the named captures. A value of the hash is an
-  # array which is list of indexes of corresponding named captures.
-  #
-  #     /(?<foo>.)(?<bar>.)/.named_captures
-  #     #=> {"foo"=>[1], "bar"=>[2]}
-  #
-  #     /(?<foo>.)(?<foo>.)/.named_captures
-  #     #=> {"foo"=>[1, 2]}
-  #
-  # If there are no named captures, an empty hash is returned.
-  #
-  #     /(.)(.)/.named_captures
-  #     #=> {}
-  #
-  def named_captures: () -> ::Hash[String, ::Array[Integer]]
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - rxp.names   -> [name1, name2, ...]
-  # -->
-  # Returns a list of names of captures as an array of strings.
-  #
-  #     /(?<foo>.)(?<bar>.)(?<baz>.)/.names
-  #     #=> ["foo", "bar", "baz"]
-  #
-  #     /(?<foo>.)(?<foo>.)/.names
-  #     #=> ["foo"]
-  #
-  #     /(.)(.)/.names
-  #     #=> []
-  #
-  def names: () -> ::Array[String]
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - rxp.options   -> integer
-  # -->
-  # Returns the set of bits corresponding to the options used when creating this
-  # Regexp (see Regexp::new for details. Note that additional bits may be set in
-  # the returned options: these are used internally by the regular expression
-  # code. These extra bits are ignored if the options are passed to Regexp::new.
-  #
-  #     Regexp::IGNORECASE                  #=> 1
-  #     Regexp::EXTENDED                    #=> 2
-  #     Regexp::MULTILINE                   #=> 4
-  #
-  #     /cat/.options                       #=> 0
-  #     /cat/ix.options                     #=> 3
-  #     Regexp.new('cat', true).options     #=> 1
-  #     /\xa1\xa2/e.options                 #=> 16
-  #
-  #     r = /cat/ix
-  #     Regexp.new(r.source, r.options)     #=> /cat/ix
-  #
-  def options: () -> Integer
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - rxp.source   -> str
-  # -->
-  # Returns the original string of the pattern.
-  #
-  #     /ab+c/ix.source #=> "ab+c"
-  #
-  # Note that escape sequences are retained as is.
-  #
-  #     /\x20\+/.source  #=> "\\x20\\+"
-  #
-  def source: () -> String
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - rxp.to_s   -> str
-  # -->
-  # Returns a string containing the regular expression and its options (using the
-  # `(?opts:source)` notation. This string can be fed back in to Regexp::new to a
-  # regular expression with the same semantics as the original. (However,
-  # `Regexp#==` may not return true when comparing the two, as the source of the
-  # regular expression itself may differ, as the example shows).  Regexp#inspect
-  # produces a generally more readable version of *rxp*.
-  #
-  #     r1 = /ab+c/ix           #=> /ab+c/ix
-  #     s1 = r1.to_s            #=> "(?ix-m:ab+c)"
-  #     r2 = Regexp.new(s1)     #=> /(?ix-m:ab+c)/
-  #     r1 == r2                #=> false
-  #     r1.source               #=> "ab+c"
-  #     r2.source               #=> "(?ix-m:ab+c)"
-  #
-  def to_s: () -> String
-
-  # <!--
-  #   rdoc-file=re.c
-  #   - ~ rxp   -> integer or nil
-  # -->
-  # Match---Matches *rxp* against the contents of `$_`. Equivalent to *`rxp* =~
-  # $_`.
-  #
-  #     $_ = "input data"
-  #     ~ /at/   #=> 7
-  #
-  def ~: () -> Integer?
-
-  private
-
-  def initialize_copy: (self object) -> self
-end
-
-# <!-- rdoc-file=re.c -->
-# see Regexp.options and Regexp.new
-#
-Regexp::EXTENDED: Integer
-
-# <!-- rdoc-file=re.c -->
-# see Regexp.options and Regexp.new
-#
-Regexp::FIXEDENCODING: Integer
-
-# <!-- rdoc-file=re.c -->
-# see Regexp.options and Regexp.new
-#
-Regexp::IGNORECASE: Integer
-
-# <!-- rdoc-file=re.c -->
-# see Regexp.options and Regexp.new
-#
-Regexp::MULTILINE: Integer
-
-# <!-- rdoc-file=re.c -->
-# see Regexp.options and Regexp.new
-#
-Regexp::NOENCODING: Integer