generapp 0.3.0 → 0.3.1

data/.rubocop_defaults.yml

@@ -1,1631 +0,0 @@
-Style/AccessModifierIndentation:
-  Description: Check indentation of private/protected visibility modifiers.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#indent-public-private-protected'
-  Enabled: true
-Style/AccessorMethodName:
-  Description: Check the naming of accessor methods for get_/set_.
-  Enabled: true
-Style/Alias:
-  Description: 'Use alias_method instead of alias.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#alias-method'
-  Enabled: true
-Style/AlignArray:
-  Description: >-
-                 Align the elements of an array literal if they span more than
-                 one line.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#align-multiline-arrays'
-  Enabled: true
-Style/AlignHash:
-  Description: >-
-                 Align the elements of a hash literal if they span more than
-                 one line.
-  Enabled: true
-Style/AlignParameters:
-  Description: >-
-                 Align the parameters of a method call if they span more
-                 than one line.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-double-indent'
-  Enabled: true
-Style/AndOr:
-  Description: 'Use &&/|| instead of and/or.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-and-or-or'
-  Enabled: true
-Style/ArrayJoin:
-  Description: 'Use Array#join instead of Array#*.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#array-join'
-  Enabled: true
-Style/AsciiComments:
-  Description: 'Use only ascii symbols in comments.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#english-comments'
-  Enabled: true
-Style/AsciiIdentifiers:
-  Description: 'Use only ascii symbols in identifiers.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#english-identifiers'
-  Enabled: true
-Style/Attr:
-  Description: 'Checks for uses of Module#attr.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#attr'
-  Enabled: true
-Style/BeginBlock:
-  Description: 'Avoid the use of BEGIN blocks.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-BEGIN-blocks'
-  Enabled: true
-Style/BarePercentLiterals:
-  Description: 'Checks if usage of %() or %Q() matches configuration.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#percent-q-shorthand'
-  Enabled: true
-Style/BlockComments:
-  Description: 'Do not use block comments.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-block-comments'
-  Enabled: true
-Style/BlockEndNewline:
-  Description: 'Put end statement of multiline block on its own line.'
-  Enabled: true
-Style/BlockDelimiters:
-  Description: >-
-                Avoid using {...} for multi-line blocks (multiline chaining is
-                always ugly).
-                Prefer {...} over do...end for single-line blocks.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#single-line-blocks'
-  Enabled: true
-Style/BracesAroundHashParameters:
-  Description: 'Enforce braces style around hash parameters.'
-  Enabled: true
-Style/CaseEquality:
-  Description: 'Avoid explicit use of the case equality operator(===).'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-case-equality'
-  Enabled: true
-Style/CaseIndentation:
-  Description: 'Indentation of when in a case/when/[else/]end.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#indent-when-to-case'
-  Enabled: true
-Style/CharacterLiteral:
-  Description: 'Checks for uses of character literals.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-character-literals'
-  Enabled: true
-Style/ClassAndModuleCamelCase:
-  Description: 'Use CamelCase for classes and modules.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#camelcase-classes'
-  Enabled: true
-Style/ClassAndModuleChildren:
-  Description: 'Checks style of children classes and modules.'
-  Enabled: true
-Style/ClassCheck:
-  Description: 'Enforces consistent use of `Object#is_a?` or `Object#kind_of?`.'
-  Enabled: true
-Style/ClassMethods:
-  Description: 'Use self when defining module/class methods.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#def-self-class-methods'
-  Enabled: true
-Style/ClassVars:
-  Description: 'Avoid the use of class variables.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-class-vars'
-  Enabled: true
-Style/ClosingParenthesisIndentation:
-  Description: 'Checks the indentation of hanging closing parentheses.'
-  Enabled: true
-Style/ColonMethodCall:
-  Description: 'Do not use :: for method call.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#double-colons'
-  Enabled: true
-Style/CommandLiteral:
-  Description: 'Use `` or %x around command literals.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#percent-x'
-  Enabled: true
-Style/CommentAnnotation:
-  Description: >-
-                 Checks formatting of special comments
-                 (TODO, FIXME, OPTIMIZE, HACK, REVIEW).
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#annotate-keywords'
-  Enabled: true
-Style/CommentIndentation:
-  Description: 'Indentation of comments.'
-  Enabled: true
-Style/ConditionalAssignment:
-  Description: >-
-                 Use the return value of `if` and `case` statements for
-                 assignment to a variable and variable comparison instead
-                 of assigning that variable inside of each branch.
-  Enabled: true
-  SingleLineConditionsOnly: true
-Style/ConstantName:
-  Description: 'Constants should use SCREAMING_SNAKE_CASE.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#screaming-snake-case'
-  Enabled: true
-Style/DefWithParentheses:
-  Description: 'Use def with parentheses when there are arguments.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#method-parens'
-  Enabled: true
-Style/DeprecatedHashMethods:
-  Description: 'Checks for use of deprecated Hash methods.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#hash-key'
-  Enabled: true
-Style/Documentation:
-  Description: 'Document classes and non-namespace modules.'
-  Enabled: true
-  Exclude:
-    - 'spec/**/*'
-    - 'test/**/*'
-Style/DotPosition:
-  Description: 'Checks the position of the dot in multi-line method calls.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#consistent-multi-line-chains'
-  Enabled: true
-Style/DoubleNegation:
-  Description: 'Checks for uses of double negation (!!).'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-bang-bang'
-  Enabled: true
-Style/EachWithObject:
-  Description: 'Prefer `each_with_object` over `inject` or `reduce`.'
-  Enabled: true
-Style/ElseAlignment:
-  Description: 'Align elses and elsifs correctly.'
-  Enabled: true
-Style/EmptyElse:
-  Description: 'Avoid empty else-clauses.'
-  Enabled: true
-Style/EmptyLineBetweenDefs:
-  Description: 'Use empty lines between defs.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#empty-lines-between-methods'
-  Enabled: true
-Style/EmptyLines:
-  Description: "Don't use several empty lines in a row."
-  Enabled: true
-Style/EmptyLinesAroundAccessModifier:
-  Description: "Keep blank lines around access modifiers."
-  Enabled: true
-Style/EmptyLinesAroundBlockBody:
-  Description: "Keeps track of empty lines around block bodies."
-  Enabled: true
-Style/EmptyLinesAroundClassBody:
-  Description: "Keeps track of empty lines around class bodies."
-  Enabled: true
-Style/EmptyLinesAroundModuleBody:
-  Description: "Keeps track of empty lines around module bodies."
-  Enabled: true
-Style/EmptyLinesAroundMethodBody:
-  Description: "Keeps track of empty lines around method bodies."
-  Enabled: true
-Style/EmptyLiteral:
-  Description: 'Prefer literals to Array.new/Hash.new/String.new.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#literal-array-hash'
-  Enabled: true
-Style/EndBlock:
-  Description: 'Avoid the use of END blocks.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-END-blocks'
-  Enabled: true
-Style/EndOfLine:
-  Description: 'Use Unix-style line endings.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#crlf'
-  Enabled: true
-Style/EvenOdd:
-  Description: 'Favor the use of Fixnum#even? && Fixnum#odd?'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#predicate-methods'
-  Enabled: true
-Style/ExtraSpacing:
-  Description: 'Do not use unnecessary spacing.'
-  Enabled: true
-Style/FileName:
-  Description: 'Use snake_case for source file names.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#snake-case-files'
-  Enabled: true
-Style/FrozenStringLiteralComment:
-  Description: >-
-                 Add the frozen_string_literal comment to the top of files
-                 to help transition from Ruby 2.3.0 to Ruby 3.0.
-  Enabled: true
-Style/InitialIndentation:
-  Description: >-
-    Checks the indentation of the first non-blank non-comment line in a file.
-  Enabled: true
-Style/FirstParameterIndentation:
-  Description: 'Checks the indentation of the first parameter in a method call.'
-  Enabled: true
-Style/FlipFlop:
-  Description: 'Checks for flip flops'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-flip-flops'
-  Enabled: true
-Style/For:
-  Description: 'Checks use of for or each in multiline loops.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-for-loops'
-  Enabled: true
-Style/FormatString:
-  Description: 'Enforce the use of Kernel#sprintf, Kernel#format or String#%.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#sprintf'
-  Enabled: true
-Style/GlobalVars:
-  Description: 'Do not introduce global variables.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#instance-vars'
-  Reference: 'http://www.zenspider.com/Languages/Ruby/QuickRef.html'
-  Enabled: true
-Style/GuardClause:
-  Description: 'Check for conditionals that can be replaced with guard clauses'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-nested-conditionals'
-  Enabled: true
-Style/HashSyntax:
-  Description: >-
-                 Prefer Ruby 1.9 hash syntax { a: 1, b: 2 } over 1.8 syntax
-                 { :a => 1, :b => 2 }.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#hash-literals'
-  Enabled: true
-Style/IfInsideElse:
-  Description: 'Finds if nodes inside else, which can be converted to elsif.'
-  Enabled: true
-Style/IfUnlessModifier:
-  Description: >-
-                 Favor modifier if/unless usage when you have a
-                 single-line body.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#if-as-a-modifier'
-  Enabled: true
-Style/IfWithSemicolon:
-  Description: 'Do not use if x; .... Use the ternary operator instead.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-semicolon-ifs'
-  Enabled: true
-Style/IndentationConsistency:
-  Description: 'Keep indentation straight.'
-  Enabled: true
-Style/IndentationWidth:
-  Description: 'Use 2 spaces for indentation.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#spaces-indentation'
-  Enabled: true
-Style/IdenticalConditionalBranches:
-  Description: >-
-                 Checks that conditional statements do not have an identical
-                 line at the end of each branch, which can validly be moved
-                 out of the conditional.
-  Enabled: true
-Style/IndentArray:
-  Description: >-
-                 Checks the indentation of the first element in an array
-                 literal.
-  Enabled: true
-Style/IndentAssignment:
-  Description: >-
-                 Checks the indentation of the first line of the
-                 right-hand-side of a multi-line assignment.
-  Enabled: true
-Style/IndentHash:
-  Description: 'Checks the indentation of the first key in a hash literal.'
-  Enabled: true
-Style/InfiniteLoop:
-  Description: 'Use Kernel#loop for infinite loops.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#infinite-loop'
-  Enabled: true
-Style/Lambda:
-  Description: 'Use the new lambda literal syntax for single-line blocks.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#lambda-multi-line'
-  Enabled: true
-Style/LambdaCall:
-  Description: 'Use lambda.call(...) instead of lambda.(...).'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#proc-call'
-  Enabled: true
-Style/LeadingCommentSpace:
-  Description: 'Comments should start with a space.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#hash-space'
-  Enabled: true
-Style/LineEndConcatenation:
-  Description: >-
-                 Use \ instead of + or << to concatenate two string literals at
-                 line end.
-  Enabled: true
-Style/MethodCallParentheses:
-  Description: 'Do not use parentheses for method calls with no arguments.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-args-no-parens'
-  Enabled: true
-Style/MethodDefParentheses:
-  Description: >-
-                 Checks if the method definitions have or don't have
-                 parentheses.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#method-parens'
-  Enabled: true
-Style/MethodName:
-  Description: 'Use the configured style when naming methods.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#snake-case-symbols-methods-vars'
-  Enabled: true
-Style/ModuleFunction:
-  Description: 'Checks for usage of `extend self` in modules.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#module-function'
-  Enabled: true
-Style/MultilineBlockChain:
-  Description: 'Avoid multi-line chains of blocks.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#single-line-blocks'
-  Enabled: true
-Style/MultilineBlockLayout:
-  Description: 'Ensures newlines after multiline block do statements.'
-  Enabled: true
-Style/MultilineIfThen:
-  Description: 'Do not use then for multi-line if/unless.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-then'
-  Enabled: true
-Style/MultilineMethodCallIndentation:
-  Description: >-
-                 Checks indentation of method calls with the dot operator
-                 that span more than one line.
-  Enabled: true
-Style/MultilineOperationIndentation:
-  Description: >-
-                 Checks indentation of binary operations that span more than
-                 one line.
-  Enabled: true
-Style/MultilineTernaryOperator:
-  Description: >-
-                 Avoid multi-line ?: (the ternary operator);
-                 use if/unless instead.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-multiline-ternary'
-  Enabled: true
-Style/MutableConstant:
-  Description: 'Do not assign mutable objects to constants.'
-  Enabled: true
-Style/NegatedIf:
-  Description: >-
-                 Favor unless over if for negative conditions
-                 (or control flow or).
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#unless-for-negatives'
-  Enabled: true
-Style/NegatedWhile:
-  Description: 'Favor until over while for negative conditions.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#until-for-negatives'
-  Enabled: true
-Style/NestedModifier:
-  Description: 'Avoid using nested modifiers.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-nested-modifiers'
-  Enabled: true
-Style/NestedParenthesizedCalls:
-  Description: >-
-                 Parenthesize method calls which are nested inside the
-                 argument list of another parenthesized method call.
-  Enabled: true
-Style/NestedTernaryOperator:
-  Description: 'Use one expression per branch in a ternary operator.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-nested-ternary'
-  Enabled: true
-Style/Next:
-  Description: 'Use `next` to skip iteration instead of a condition at the end.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-nested-conditionals'
-  Enabled: true
-Style/NilComparison:
-  Description: 'Prefer x.nil? to x == nil.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#predicate-methods'
-  Enabled: true
-Style/NonNilCheck:
-  Description: 'Checks for redundant nil checks.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-non-nil-checks'
-  Enabled: true
-Style/Not:
-  Description: 'Use ! instead of not.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#bang-not-not'
-  Enabled: true
-Style/NumericLiterals:
-  Description: >-
-                 Add underscores to large numeric literals to improve their
-                 readability.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#underscores-in-numerics'
-  Enabled: true
-Style/OneLineConditional:
-  Description: >-
-                 Favor the ternary operator(?:) over
-                 if/then/else/end constructs.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#ternary-operator'
-  Enabled: true
-Style/OpMethod:
-  Description: 'When defining binary operators, name the argument other.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#other-arg'
-  Enabled: true
-Style/OptionalArguments:
-  Description: >-
-                 Checks for optional arguments that do not appear at the end
-                 of the argument list
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#optional-arguments'
-  Enabled: true
-Style/ParallelAssignment:
-  Description: >-
-                  Check for simple usages of parallel assignment.
-                  It will only warn when the number of variables
-                  matches on both sides of the assignment.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#parallel-assignment'
-  Enabled: true
-Style/ParenthesesAroundCondition:
-  Description: >-
-                 Don't use parentheses around the condition of an
-                 if/unless/while.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-parens-if'
-  Enabled: true
-Style/PercentLiteralDelimiters:
-  Description: 'Use `%`-literal delimiters consistently'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#percent-literal-braces'
-  Enabled: true
-Style/PercentQLiterals:
-  Description: 'Checks if uses of %Q/%q match the configured preference.'
-  Enabled: true
-Style/PerlBackrefs:
-  Description: 'Avoid Perl-style regex back references.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-perl-regexp-last-matchers'
-  Enabled: true
-Style/PredicateName:
-  Description: 'Check the names of predicate methods.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#bool-methods-qmark'
-  Enabled: true
-Style/Proc:
-  Description: 'Use proc instead of Proc.new.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#proc'
-  Enabled: true
-Style/RaiseArgs:
-  Description: 'Checks the arguments passed to raise/fail.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#exception-class-messages'
-  Enabled: true
-Style/RedundantBegin:
-  Description: "Don't use begin blocks when they are not needed."
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#begin-implicit'
-  Enabled: true
-Style/RedundantException:
-  Description: "Checks for an obsolete RuntimeException argument in raise/fail."
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-explicit-runtimeerror'
-  Enabled: true
-Style/RedundantFreeze:
-  Description: "Checks usages of Object#freeze on immutable objects."
-  Enabled: true
-Style/RedundantParentheses:
-  Description: "Checks for parentheses that seem not to serve any purpose."
-  Enabled: true
-Style/RedundantReturn:
-  Description: "Don't use return where it's not required."
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-explicit-return'
-  Enabled: true
-Style/RedundantSelf:
-  Description: "Don't use self where it's not needed."
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-self-unless-required'
-  Enabled: true
-Style/RegexpLiteral:
-  Description: 'Use / or %r around regular expressions.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#percent-r'
-  Enabled: true
-Style/RescueEnsureAlignment:
-  Description: 'Align rescues and ensures correctly.'
-  Enabled: true
-Style/RescueModifier:
-  Description: 'Avoid using rescue in its modifier form.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-rescue-modifiers'
-  Enabled: true
-Style/SelfAssignment:
-  Description: >-
-                 Checks for places where self-assignment shorthand should have
-                 been used.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#self-assignment'
-  Enabled: true
-Style/Semicolon:
-  Description: "Don't use semicolons to terminate expressions."
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-semicolon'
-  Enabled: true
-Style/SignalException:
-  Description: 'Checks for proper usage of fail and raise.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#fail-method'
-  Enabled: true
-Style/SingleLineBlockParams:
-  Description: 'Enforces the names of some block params.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#reduce-blocks'
-  Enabled: true
-Style/SingleLineMethods:
-  Description: 'Avoid single-line methods.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-single-line-methods'
-  Enabled: true
-Style/SpaceBeforeFirstArg:
-  Description: >-
-                 Checks that exactly one space is used between a method name
-                 and the first argument for method calls without parentheses.
-  Enabled: true
-Style/SpaceAfterColon:
-  Description: 'Use spaces after colons.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#spaces-operators'
-  Enabled: true
-Style/SpaceAfterComma:
-  Description: 'Use spaces after commas.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#spaces-operators'
-  Enabled: true
-Style/SpaceAfterMethodName:
-  Description: >-
-                 Do not put a space between a method name and the opening
-                 parenthesis in a method definition.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#parens-no-spaces'
-  Enabled: true
-Style/SpaceAfterNot:
-  Description: Tracks redundant space after the ! operator.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-space-bang'
-  Enabled: true
-Style/SpaceAfterSemicolon:
-  Description: 'Use spaces after semicolons.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#spaces-operators'
-  Enabled: true
-Style/SpaceBeforeBlockBraces:
-  Description: >-
-                 Checks that the left block brace has or doesn't have space
-                 before it.
-  Enabled: true
-Style/SpaceBeforeComma:
-  Description: 'No spaces before commas.'
-  Enabled: true
-Style/SpaceBeforeComment:
-  Description: >-
-                 Checks for missing space between code and a comment on the
-                 same line.
-  Enabled: true
-Style/SpaceBeforeSemicolon:
-  Description: 'No spaces before semicolons.'
-  Enabled: true
-Style/SpaceInsideBlockBraces:
-  Description: >-
-                 Checks that block braces have or don't have surrounding space.
-                 For blocks taking parameters, checks that the left brace has
-                 or doesn't have trailing space.
-  Enabled: true
-Style/SpaceAroundBlockParameters:
-  Description: 'Checks the spacing inside and after block parameters pipes.'
-  Enabled: true
-Style/SpaceAroundEqualsInParameterDefault:
-  Description: >-
-                 Checks that the equals signs in parameter default assignments
-                 have or don't have surrounding space depending on
-                 configuration.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#spaces-around-equals'
-  Enabled: true
-Style/SpaceAroundKeyword:
-  Description: 'Use a space around keywords if appropriate.'
-  Enabled: true
-Style/SpaceAroundOperators:
-  Description: 'Use a single space around operators.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#spaces-operators'
-  Enabled: true
-Style/SpaceInsideBrackets:
-  Description: 'No spaces after [ or before ].'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-spaces-braces'
-  Enabled: true
-Style/SpaceInsideHashLiteralBraces:
-  Description: "Use spaces inside hash literal braces - or don't."
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#spaces-operators'
-  Enabled: true
-Style/SpaceInsideParens:
-  Description: 'No spaces after ( or before ).'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-spaces-braces'
-  Enabled: true
-Style/SpaceInsideRangeLiteral:
-  Description: 'No spaces inside range literals.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-space-inside-range-literals'
-  Enabled: true
-Style/SpaceInsideStringInterpolation:
-  Description: 'Checks for padding/surrounding spaces inside string interpolation.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#string-interpolation'
-  Enabled: true
-Style/SpecialGlobalVars:
-  Description: 'Avoid Perl-style global variables.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-cryptic-perlisms'
-  Enabled: true
-Style/StabbyLambdaParentheses:
-  Description: 'Check for the usage of parentheses around stabby lambda arguments.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#stabby-lambda-with-args'
-  Enabled: true
-Style/StringLiterals:
-  Description: 'Checks if uses of quotes match the configured preference.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#consistent-string-literals'
-  Enabled: true
-Style/StringLiteralsInInterpolation:
-  Description: >-
-                 Checks if uses of quotes inside expressions in interpolated
-                 strings match the configured preference.
-  Enabled: true
-Style/StructInheritance:
-  Description: 'Checks for inheritance from Struct.new.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-extend-struct-new'
-  Enabled: true
-Style/SymbolLiteral:
-  Description: 'Use plain symbols instead of string symbols when possible.'
-  Enabled: true
-Style/SymbolProc:
-  Description: 'Use symbols as procs instead of blocks when possible.'
-  Enabled: true
-Style/Tab:
-  Description: 'No hard tabs.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#spaces-indentation'
-  Enabled: true
-Style/TrailingBlankLines:
-  Description: 'Checks trailing blank lines and final newline.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#newline-eof'
-  Enabled: true
-Style/TrailingCommaInArguments:
-  Description: 'Checks for trailing comma in argument lists.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-trailing-array-commas'
-  Enabled: true
-Style/TrailingCommaInLiteral:
-  Description: 'Checks for trailing comma in array and hash literals.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-trailing-array-commas'
-  Enabled: true
-Style/TrailingWhitespace:
-  Description: 'Avoid trailing whitespace.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-trailing-whitespace'
-  Enabled: true
-Style/TrivialAccessors:
-  Description: 'Prefer attr_* methods to trivial readers/writers.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#attr_family'
-  Enabled: true
-Style/UnlessElse:
-  Description: >-
-                 Do not use unless with else. Rewrite these with the positive
-                 case first.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-else-with-unless'
-  Enabled: true
-Style/UnneededCapitalW:
-  Description: 'Checks for %W when interpolation is not needed.'
-  Enabled: true
-Style/UnneededInterpolation:
-  Description: 'Checks for strings that are just an interpolated expression.'
-  Enabled: true
-Style/UnneededPercentQ:
-  Description: 'Checks for %q/%Q when single quotes or double quotes would do.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#percent-q'
-  Enabled: true
-Style/TrailingUnderscoreVariable:
-  Description: >-
-                 Checks for the usage of unneeded trailing underscores at the
-                 end of parallel variable assignment.
-  AllowNamedUnderscoreVariables: true
-  Enabled: true
-Style/VariableInterpolation:
-  Description: >-
-                 Don't interpolate global, instance and class variables
-                 directly in strings.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#curlies-interpolate'
-  Enabled: true
-Style/VariableName:
-  Description: 'Use the configured style when naming variables.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#snake-case-symbols-methods-vars'
-  Enabled: true
-Style/WhenThen:
-  Description: 'Use when x then ... for one-line cases.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#one-line-cases'
-  Enabled: true
-Style/WhileUntilDo:
-  Description: 'Checks for redundant do after while or until.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-multiline-while-do'
-  Enabled: true
-Style/WhileUntilModifier:
-  Description: >-
-                 Favor modifier while/until usage when you have a
-                 single-line body.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#while-as-a-modifier'
-  Enabled: true
-Style/WordArray:
-  Description: 'Use %w or %W for arrays of words.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#percent-w'
-  Enabled: true
-Metrics/AbcSize:
-  Description: >-
-                 A calculated magnitude based on number of assignments,
-                 branches, and conditions.
-  Reference: 'http://c2.com/cgi/wiki?AbcMetric'
-  Enabled: true
-Metrics/BlockNesting:
-  Description: 'Avoid excessive block nesting'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#three-is-the-number-thou-shalt-count'
-  Enabled: true
-Metrics/ClassLength:
-  Description: 'Avoid classes longer than 100 lines of code.'
-  Enabled: true
-Metrics/ModuleLength:
-  Description: 'Avoid modules longer than 100 lines of code.'
-  Enabled: true
-Metrics/CyclomaticComplexity:
-  Description: >-
-                 A complexity metric that is strongly correlated to the number
-                 of test cases needed to validate a method.
-  Enabled: true
-Metrics/LineLength:
-  Description: 'Limit lines to 80 characters.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#80-character-limits'
-  Enabled: true
-Metrics/MethodLength:
-  Description: 'Avoid methods longer than 10 lines of code.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#short-methods'
-  Enabled: true
-Metrics/ParameterLists:
-  Description: 'Avoid parameter lists longer than three or four parameters.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#too-many-params'
-  Enabled: true
-Metrics/PerceivedComplexity:
-  Description: >-
-                 A complexity metric geared towards measuring complexity for a
-                 human reader.
-  Enabled: true
-Lint/AmbiguousOperator:
-  Description: >-
-                 Checks for ambiguous operators in the first argument of a
-                 method invocation without parentheses.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#parens-as-args'
-  Enabled: true
-Lint/AmbiguousRegexpLiteral:
-  Description: >-
-                 Checks for ambiguous regexp literals in the first argument of
-                 a method invocation without parentheses.
-  Enabled: true
-Lint/AssignmentInCondition:
-  Description: "Don't use assignment in conditions."
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#safe-assignment-in-condition'
-  Enabled: true
-Lint/BlockAlignment:
-  Description: 'Align block ends correctly.'
-  Enabled: true
-Lint/CircularArgumentReference:
-  Description: "Default values in optional keyword arguments and optional ordinal arguments should not refer back to the name of the argument."
-  Enabled: true
-Lint/ConditionPosition:
-  Description: >-
-                 Checks for condition placed in a confusing position relative to
-                 the keyword.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#same-line-condition'
-  Enabled: true
-Lint/Debugger:
-  Description: 'Check for debugger calls.'
-  Enabled: true
-Lint/DefEndAlignment:
-  Description: 'Align ends corresponding to defs correctly.'
-  Enabled: true
-Lint/DeprecatedClassMethods:
-  Description: 'Check for deprecated class method calls.'
-  Enabled: true
-Lint/DuplicateMethods:
-  Description: 'Check for duplicate method definitions.'
-  Enabled: true
-Lint/DuplicatedKey:
-  Description: 'Check for duplicate keys in hash literals.'
-  Enabled: true
-Lint/EachWithObjectArgument:
-  Description: 'Check for immutable argument given to each_with_object.'
-  Enabled: true
-Lint/ElseLayout:
-  Description: 'Check for odd code arrangement in an else block.'
-  Enabled: true
-Lint/EmptyEnsure:
-  Description: 'Checks for empty ensure block.'
-  Enabled: true
-Lint/EmptyInterpolation:
-  Description: 'Checks for empty string interpolation.'
-  Enabled: true
-Lint/EndAlignment:
-  Description: 'Align ends correctly.'
-  Enabled: true
-Lint/EndInMethod:
-  Description: 'END blocks should not be placed inside method definitions.'
-  Enabled: true
-Lint/EnsureReturn:
-  Description: 'Do not use return in an ensure block.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-return-ensure'
-  Enabled: true
-Lint/Eval:
-  Description: 'The use of eval represents a serious security risk.'
-  Enabled: true
-Lint/FloatOutOfRange:
-  Description: >-
-                 Catches floating-point literals too large or small for Ruby to
-                 represent.
-  Enabled: true
-Lint/FormatParameterMismatch:
-  Description: 'The number of parameters to format/sprint must match the fields.'
-  Enabled: true
-Lint/HandleExceptions:
-  Description: "Don't suppress exception."
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#dont-hide-exceptions'
-  Enabled: true
-Lint/ImplicitStringConcatenation:
-  Description: >-
-                 Checks for adjacent string literals on the same line, which
-                 could better be represented as a single string literal.
-  Enabled: true
-Lint/IneffectiveAccessModifier:
-  Description: >-
-                 Checks for attempts to use `private` or `protected` to set
-                 the visibility of a class method, which does not work.
-  Enabled: true
-Lint/InvalidCharacterLiteral:
-  Description: >-
-                 Checks for invalid character literals with a non-escaped
-                 whitespace character.
-  Enabled: true
-Lint/LiteralInCondition:
-  Description: 'Checks of literals used in conditions.'
-  Enabled: true
-Lint/LiteralInInterpolation:
-  Description: 'Checks for literals used in interpolation.'
-  Enabled: true
-Lint/Loop:
-  Description: >-
-                 Use Kernel#loop with break rather than begin/end/until or
-                 begin/end/while for post-loop tests.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#loop-with-break'
-  Enabled: true
-Lint/NestedMethodDefinition:
-  Description: 'Do not use nested method definitions.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-nested-methods'
-  Enabled: true
-Lint/NextWithoutAccumulator:
-  Description:  >-
-                  Do not omit the accumulator when calling `next`
-                  in a `reduce`/`inject` block.
-  Enabled: true
-Lint/NonLocalExitFromIterator:
-  Description: 'Do not use return in iterator to cause non-local exit.'
-  Enabled: true
-Lint/ParenthesesAsGroupedExpression:
-  Description: >-
-                 Checks for method calls with a space before the opening
-                 parenthesis.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#parens-no-spaces'
-  Enabled: true
-Lint/RandOne:
-  Description: >-
-                 Checks for `rand(1)` calls. Such calls always return `0`
-                 and most likely a mistake.
-  Enabled: true
-Lint/RequireParentheses:
-  Description: >-
-                 Use parentheses in the method call to avoid confusion
-                 about precedence.
-  Enabled: true
-Lint/RescueException:
-  Description: 'Avoid rescuing the Exception class.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-blind-rescues'
-  Enabled: true
-Lint/ShadowingOuterLocalVariable:
-  Description: >-
-                 Do not use the same name as outer local variable
-                 for block arguments or block local variables.
-  Enabled: true
-Lint/StringConversionInInterpolation:
-  Description: 'Checks for Object#to_s usage in string interpolation.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#no-to-s'
-  Enabled: true
-Lint/UnderscorePrefixedVariableName:
-  Description: 'Do not use prefix `_` for a variable that is used.'
-  Enabled: true
-Lint/UnneededDisable:
-  Description: >-
-                 Checks for rubocop:disable comments that can be removed.
-                 Note: this cop is not disabled when disabling all cops.
-                 It must be explicitly disabled.
-  Enabled: true
-Lint/UnusedBlockArgument:
-  Description: 'Checks for unused block arguments.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#underscore-unused-vars'
-  Enabled: true
-Lint/UnusedMethodArgument:
-  Description: 'Checks for unused method arguments.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#underscore-unused-vars'
-  Enabled: true
-Lint/UnreachableCode:
-  Description: 'Unreachable code.'
-  Enabled: true
-Lint/UselessAccessModifier:
-  Description: 'Checks for useless access modifiers.'
-  Enabled: true
-Lint/UselessAssignment:
-  Description: 'Checks for useless assignment to a local variable.'
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#underscore-unused-vars'
-  Enabled: true
-Lint/UselessComparison:
-  Description: 'Checks for comparison of something with itself.'
-  Enabled: true
-Lint/UselessElseWithoutRescue:
-  Description: 'Checks for useless `else` in `begin..end` without `rescue`.'
-  Enabled: true
-Lint/UselessSetterCall:
-  Description: 'Checks for useless setter call to a local variable.'
-  Enabled: true
-Lint/Void:
-  Description: 'Possible use of operator/literal/variable in void context.'
-  Enabled: true
-Performance/Casecmp:
-  Description: 'Use `casecmp` rather than `downcase ==`.'
-  Reference: 'https://github.com/JuanitoFatas/fast-ruby#stringcasecmp-vs-stringdowncase---code'
-  Enabled: true
-Performance/CaseWhenSplat:
-  Description: >-
-                  Place `when` conditions that use splat at the end
-                  of the list of `when` branches.
-  Enabled: true
-Performance/Count:
-  Description: >-
-                  Use `count` instead of `select...size`, `reject...size`,
-                  `select...count`, `reject...count`, `select...length`,
-                  and `reject...length`.
-  Enabled: true
-Performance/Detect:
-  Description: >-
-                  Use `detect` instead of `select.first`, `find_all.first`,
-                  `select.last`, and `find_all.last`.
-  Reference: 'https://github.com/JuanitoFatas/fast-ruby#enumerabledetect-vs-enumerableselectfirst-code'
-  Enabled: true
-Performance/DoubleStartEndWith:
-  Description: >-
-                  Use `str.{start,end}_with?(x, ..., y, ...)`
-                  instead of `str.{start,end}_with?(x, ...) || str.{start,end}_with?(y, ...)`.
-  Enabled: true
-Performance/EndWith:
-  Description: 'Use `end_with?` instead of a regex match anchored to the end of a string.'
-  Reference: 'https://github.com/JuanitoFatas/fast-ruby#stringmatch-vs-stringstart_withstringend_with-code-start-code-end'
-  Enabled: true
-Performance/FixedSize:
-  Description: 'Do not compute the size of statically sized objects except in constants'
-  Enabled: true
-Performance/FlatMap:
-  Description: >-
-                  Use `Enumerable#flat_map`
-                  instead of `Enumerable#map...Array#flatten(1)`
-                  or `Enumberable#collect..Array#flatten(1)`
-  Reference: 'https://github.com/JuanitoFatas/fast-ruby#enumerablemaparrayflatten-vs-enumerableflat_map-code'
-  Enabled: true
-  EnabledForFlattenWithoutParams: false
-Performance/HashEachMethods:
-  Description: >-
-                 Use `Hash#each_key` and `Hash#each_value` instead of
-                 `Hash#keys.each` and `Hash#values.each`.
-  StyleGuide: 'https://github.com/bbatsov/ruby-style-guide#hash-each'
-  Enabled: true
-  AutoCorrect: false
-Performance/LstripRstrip:
-  Description: 'Use `strip` instead of `lstrip.rstrip`.'
-  Enabled: true
-Performance/RangeInclude:
-  Description: 'Use `Range#cover?` instead of `Range#include?`.'
-  Reference: 'https://github.com/JuanitoFatas/fast-ruby#cover-vs-include-code'
-  Enabled: true
-Performance/RedundantBlockCall:
-  Description: 'Use `yield` instead of `block.call`.'
-  Reference: 'https://github.com/JuanitoFatas/fast-ruby#proccall-vs-yield-code'
-  Enabled: true
-Performance/RedundantMatch:
-  Description: >-
-                  Use `=~` instead of `String#match` or `Regexp#match` in a context where the
-                  returned `MatchData` is not needed.
-  Enabled: true
-Performance/RedundantMerge:
-  Description: 'Use Hash#[]=, rather than Hash#merge! with a single key-value pair.'
-  Reference: 'https://github.com/JuanitoFatas/fast-ruby#hashmerge-vs-hash-code'
-  Enabled: true
-Performance/RedundantSortBy:
-  Description: 'Use `sort` instead of `sort_by { |x| x }`.'
-  Enabled: true
-Performance/ReverseEach:
-  Description: 'Use `reverse_each` instead of `reverse.each`.'
-  Reference: 'https://github.com/JuanitoFatas/fast-ruby#enumerablereverseeach-vs-enumerablereverse_each-code'
-  Enabled: true
-Performance/Sample:
-  Description: >-
-                  Use `sample` instead of `shuffle.first`,
-                  `shuffle.last`, and `shuffle[Fixnum]`.
-  Reference: 'https://github.com/JuanitoFatas/fast-ruby#arrayshufflefirst-vs-arraysample-code'
-  Enabled: true
-Performance/Size:
-  Description: >-
-                  Use `size` instead of `count` for counting
-                  the number of elements in `Array` and `Hash`.
-  Reference: 'https://github.com/JuanitoFatas/fast-ruby#arraycount-vs-arraysize-code'
-  Enabled: true
-Performance/StartWith:
-  Description: 'Use `start_with?` instead of a regex match anchored to the beginning of a string.'
-  Reference: 'https://github.com/JuanitoFatas/fast-ruby#stringmatch-vs-stringstart_withstringend_with-code-start-code-end'
-  Enabled: true
-Performance/StringReplacement:
-  Description: >-
-                  Use `tr` instead of `gsub` when you are replacing the same
-                  number of characters. Use `delete` instead of `gsub` when
-                  you are deleting characters.
-  Reference: 'https://github.com/JuanitoFatas/fast-ruby#stringgsub-vs-stringtr-code'
-  Enabled: true
-Performance/TimesMap:
-  Description: 'Checks for .times.map calls.'
-  Enabled: true
-Rails/ActionFilter:
-  Description: 'Enforces consistent use of action filter methods.'
-  Enabled: true
-Rails/Date:
-  Description: >-
-                  Checks the correct usage of date aware methods,
-                  such as Date.today, Date.current etc.
-  Enabled: true
-Rails/Delegate:
-  Description: 'Prefer delegate method for delegations.'
-  Enabled: true
-Rails/FindBy:
-  Description: 'Prefer find_by over where.first.'
-  Enabled: true
-Rails/FindEach:
-  Description: 'Prefer all.find_each over all.find.'
-  Enabled: true
-Rails/HasAndBelongsToMany:
-  Description: 'Prefer has_many :through to has_and_belongs_to_many.'
-  Enabled: true
-Rails/Output:
-  Description: 'Checks for calls to puts, print, etc.'
-  Enabled: true
-Rails/PluralizationGrammar:
-  Description: 'Checks for incorrect grammar when using methods like `3.day.ago`.'
-  Enabled: true
-Rails/ReadWriteAttribute:
-  Description: >-
-                 Checks for read_attribute(:attr) and
-                 write_attribute(:attr, val).
-  Enabled: true
-Rails/ScopeArgs:
-  Description: 'Checks the arguments of ActiveRecord scopes.'
-  Enabled: true
-Rails/TimeZone:
-  Description: 'Checks the correct usage of time zone aware methods.'
-  StyleGuide: 'https://github.com/bbatsov/rails-style-guide#time'
-  Reference: 'http://danilenko.org/2012/7/6/rails_timezones'
-  Enabled: true
-Rails/Validation:
-  Description: 'Use validates :attribute, hash of validations.'
-  Enabled: true
-AllCops:
-  Include:
-    - '**/*.gemspec'
-    - '**/*.podspec'
-    - '**/*.jbuilder'
-    - '**/*.rake'
-    - '**/*.opal'
-    - '**/config.ru'
-    - '**/Gemfile'
-    - '**/Rakefile'
-    - '**/Capfile'
-    - '**/Guardfile'
-    - '**/Podfile'
-    - '**/Thorfile'
-    - '**/Vagrantfile'
-    - '**/Berksfile'
-    - '**/Cheffile'
-    - '**/Vagabondfile'
-  Exclude:
-    - 'vendor/**/*'
-  DefaultFormatter: progress
-  DisplayCopNames: false
-  DisplayStyleGuide: false
-  ExtraDetails: false
-  StyleGuideCopsOnly: false
-  DisabledByDefault: false
-  UseCache: true
-  MaxFilesInCache: 20000
-  CacheRootDirectory: /tmp
-  TargetRubyVersion: 2.0
-Style/AccessModifierIndentation:
-  EnforcedStyle: indent
-  SupportedStyles:
-    - outdent
-    - indent
-  IndentationWidth: ~
-Style/Alias:
-  EnforcedStyle: prefer_alias
-  SupportedStyles:
-    - prefer_alias
-    - prefer_alias_method
-Style/AlignHash:
-  EnforcedHashRocketStyle: key
-  EnforcedColonStyle: key
-  EnforcedLastArgumentHashStyle: always_inspect
-  SupportedLastArgumentHashStyles:
-    - always_inspect
-    - always_ignore
-    - ignore_implicit
-    - ignore_explicit
-Style/AlignParameters:
-  EnforcedStyle: with_first_parameter
-  SupportedStyles:
-    - with_first_parameter
-    - with_fixed_indentation
-Style/AndOr:
-  EnforcedStyle: always
-  SupportedStyles:
-    - always
-    - conditionals
-Style/BarePercentLiterals:
-  EnforcedStyle: bare_percent
-  SupportedStyles:
-    - percent_q
-    - bare_percent
-Style/BlockDelimiters:
-  EnforcedStyle: line_count_based
-  SupportedStyles:
-    - line_count_based
-    - semantic
-    - braces_for_chaining
-  ProceduralMethods:
-    - benchmark
-    - bm
-    - bmbm
-    - create
-    - each_with_object
-    - measure
-    - new
-    - realtime
-    - tap
-    - with_object
-  FunctionalMethods:
-    - let
-    - let!
-    - subject
-    - watch
-  IgnoredMethods:
-    - lambda
-    - proc
-    - it
-Style/BracesAroundHashParameters:
-  EnforcedStyle: no_braces
-  SupportedStyles:
-    - braces
-    - no_braces
-    - context_dependent
-Style/CaseIndentation:
-  IndentWhenRelativeTo: case
-  SupportedStyles:
-    - case
-    - end
-  IndentOneStep: false
-  IndentationWidth: ~
-Style/ClassAndModuleChildren:
-  EnforcedStyle: nested
-  SupportedStyles:
-    - nested
-    - compact
-Style/ClassCheck:
-  EnforcedStyle: is_a?
-  SupportedStyles:
-    - is_a?
-    - kind_of?
-Style/CollectionMethods:
-  PreferredMethods:
-    collect: 'map'
-    collect!: 'map!'
-    inject: 'reduce'
-    detect: 'find'
-    find_all: 'select'
-Style/CommandLiteral:
-  EnforcedStyle: backticks
-  SupportedStyles:
-    - backticks
-    - percent_x
-    - mixed
-  AllowInnerBackticks: false
-Style/CommentAnnotation:
-  Keywords:
-    - TODO
-    - FIXME
-    - OPTIMIZE
-    - HACK
-    - REVIEW
-Style/Copyright:
-  Notice: '^Copyright (\(c\) )?2[0-9]{3} .+'
-  AutocorrectNotice: ''
-Style/DotPosition:
-  EnforcedStyle: leading
-  SupportedStyles:
-    - leading
-    - trailing
-Style/EmptyElse:
-  EnforcedStyle: both
-  SupportedStyles:
-    - empty
-    - nil
-    - both
-Style/EmptyLineBetweenDefs:
-  AllowAdjacentOneLineDefs: false
-Style/EmptyLinesAroundBlockBody:
-  EnforcedStyle: no_empty_lines
-  SupportedStyles:
-    - empty_lines
-    - no_empty_lines
-Style/EmptyLinesAroundClassBody:
-  EnforcedStyle: no_empty_lines
-  SupportedStyles:
-    - empty_lines
-    - no_empty_lines
-Style/EmptyLinesAroundModuleBody:
-  EnforcedStyle: no_empty_lines
-  SupportedStyles:
-    - empty_lines
-    - no_empty_lines
-Style/Encoding:
-  EnforcedStyle: always
-  SupportedStyles:
-    - when_needed
-    - always
-  AutoCorrectEncodingComment: '# encoding: utf-8'
-Style/ExtraSpacing:
-  AllowForAlignment: true
-  ForceEqualSignAlignment: false
-Style/FileName:
-  Exclude: []
-  ExpectMatchingDefinition: false
-  Regex: ~
-  IgnoreExecutableScripts: true
-Style/FirstParameterIndentation:
-  EnforcedStyle: special_for_inner_method_call_in_parentheses
-  SupportedStyles:
-    - consistent
-    - special_for_inner_method_call
-    - special_for_inner_method_call_in_parentheses
-  IndentationWidth: ~
-Style/For:
-  EnforcedStyle: each
-  SupportedStyles:
-    - for
-    - each
-Style/FormatString:
-  EnforcedStyle: format
-  SupportedStyles:
-    - format
-    - sprintf
-    - percent
-Style/FrozenStringLiteralComment:
-  EnforcedStyle: when_needed
-  SupportedStyles:
-    - when_needed
-    - always
-Style/GlobalVars:
-  AllowedVariables: []
-Style/GuardClause:
-  MinBodyLength: 1
-Style/HashSyntax:
-  EnforcedStyle: ruby19
-  SupportedStyles:
-    - ruby19
-    - ruby19_no_mixed_keys
-    - hash_rockets
-  UseHashRocketsWithSymbolValues: false
-Style/IfUnlessModifier:
-  MaxLineLength: 80
-Style/IndentationConsistency:
-  EnforcedStyle: normal
-  SupportedStyles:
-    - normal
-    - rails
-Style/IndentationWidth:
-  Width: 2
-Style/IndentArray:
-  EnforcedStyle: special_inside_parentheses
-  SupportedStyles:
-    - special_inside_parentheses
-    - consistent
-    - align_brackets
-  IndentationWidth: ~
-Style/IndentAssignment:
-  IndentationWidth: ~
-Style/IndentHash:
-  EnforcedStyle: special_inside_parentheses
-  SupportedStyles:
-    - special_inside_parentheses
-    - consistent
-    - align_braces
-  IndentationWidth: ~
-Style/LambdaCall:
-  EnforcedStyle: call
-  SupportedStyles:
-    - call
-    - braces
-Style/Next:
-  EnforcedStyle: skip_modifier_ifs
-  MinBodyLength: 3
-  SupportedStyles:
-    - skip_modifier_ifs
-    - always
-Style/NonNilCheck:
-  IncludeSemanticChanges: false
-Style/MethodDefParentheses:
-  EnforcedStyle: require_parentheses
-  SupportedStyles:
-    - require_parentheses
-    - require_no_parentheses
-    - require_no_parentheses_except_multiline
-Style/MethodName:
-  EnforcedStyle: snake_case
-  SupportedStyles:
-    - snake_case
-    - camelCase
-Style/MultilineAssignmentLayout:
-  SupportedTypes:
-    - block
-    - case
-    - class
-    - if
-    - kwbegin
-    - module
-  EnforcedStyle: new_line
-  SupportedStyles:
-    - same_line
-    - new_line
-Style/MultilineMethodCallIndentation:
-  EnforcedStyle: aligned
-  SupportedStyles:
-    - aligned
-    - indented
-  IndentationWidth: ~
-Style/MultilineOperationIndentation:
-  EnforcedStyle: aligned
-  SupportedStyles:
-    - aligned
-    - indented
-  IndentationWidth: ~
-Style/NumericLiterals:
-  MinDigits: 5
-Style/OptionHash:
-  SuspiciousParamNames:
-    - options
-    - opts
-    - args
-    - params
-    - parameters
-Style/ParenthesesAroundCondition:
-  AllowSafeAssignment: true
-Style/PercentLiteralDelimiters:
-  PreferredDelimiters:
-    '%':  ()
-    '%i': ()
-    '%q': ()
-    '%Q': ()
-    '%r': '{}'
-    '%s': ()
-    '%w': ()
-    '%W': ()
-    '%x': ()
-Style/PercentQLiterals:
-  EnforcedStyle: lower_case_q
-  SupportedStyles:
-    - lower_case_q # Use %q when possible, %Q when necessary
-    - upper_case_q # Always use %Q
-Style/PredicateName:
-  NamePrefix:
-    - is_
-    - has_
-    - have_
-  NamePrefixBlacklist:
-    - is_
-    - has_
-    - have_
-  NameWhitelist:
-    - is_a?
-Style/RaiseArgs:
-  EnforcedStyle: exploded
-  SupportedStyles:
-    - compact # raise Exception.new(msg)
-    - exploded # raise Exception, msg
-Style/RedundantReturn:
-  AllowMultipleReturnValues: false
-Style/RegexpLiteral:
-  EnforcedStyle: slashes
-  SupportedStyles:
-    - slashes
-    - percent_r
-    - mixed
-  AllowInnerSlashes: false
-Style/Semicolon:
-  AllowAsExpressionSeparator: false
-Style/SignalException:
-  EnforcedStyle: semantic
-  SupportedStyles:
-    - only_raise
-    - only_fail
-    - semantic
-Style/SingleLineBlockParams:
-  Methods:
-    - reduce:
-        - a
-        - e
-    - inject:
-        - a
-        - e
-Style/SingleLineMethods:
-  AllowIfMethodIsEmpty: true
-Style/SpaceBeforeFirstArg:
-  AllowForAlignment: true
-Style/SpecialGlobalVars:
-  EnforcedStyle: use_english_names
-  SupportedStyles:
-    - use_perl_names
-    - use_english_names
-Style/StabbyLambdaParentheses:
-  EnforcedStyle: require_parentheses
-  SupportedStyles:
-    - require_parentheses
-    - require_no_parentheses
-Style/StringLiterals:
-  EnforcedStyle: single_quotes
-  SupportedStyles:
-    - single_quotes
-    - double_quotes
-  ConsistentQuotesInMultiline: false
-Style/StringLiteralsInInterpolation:
-  EnforcedStyle: single_quotes
-  SupportedStyles:
-    - single_quotes
-    - double_quotes
-Style/StringMethods:
-  PreferredMethods:
-    intern: to_sym
-Style/SpaceAroundBlockParameters:
-  EnforcedStyleInsidePipes: no_space
-  SupportedStyles:
-    - space
-    - no_space
-Style/SpaceAroundEqualsInParameterDefault:
-  EnforcedStyle: space
-  SupportedStyles:
-    - space
-    - no_space
-Style/SpaceAroundOperators:
-  AllowForAlignment: true
-Style/SpaceBeforeBlockBraces:
-  EnforcedStyle: space
-  SupportedStyles:
-    - space
-    - no_space
-Style/SpaceInsideBlockBraces:
-  EnforcedStyle: space
-  SupportedStyles:
-    - space
-    - no_space
-  EnforcedStyleForEmptyBraces: no_space
-  SpaceBeforeBlockParameters: true
-Style/SpaceInsideHashLiteralBraces:
-  EnforcedStyle: space
-  EnforcedStyleForEmptyBraces: no_space
-  SupportedStyles:
-    - space
-    - no_space
-Style/SpaceInsideStringInterpolation:
-  EnforcedStyle: no_space
-  SupportedStyles:
-    - space
-    - no_space
-Style/SymbolArray:
-  EnforcedStyle: percent
-  SupportedStyles:
-    - percent
-    - brackets
-Style/SymbolProc:
-  IgnoredMethods:
-    - respond_to
-Style/TrailingBlankLines:
-  EnforcedStyle: final_newline
-  SupportedStyles:
-    - final_newline
-    - final_blank_line
-Style/TrailingCommaInArguments:
-  EnforcedStyleForMultiline: no_comma
-  SupportedStyles:
-    - comma
-    - consistent_comma
-    - no_comma
-Style/TrailingCommaInLiteral:
-  EnforcedStyleForMultiline: no_comma
-  SupportedStyles:
-    - comma
-    - consistent_comma
-    - no_comma
-Style/TrivialAccessors:
-  ExactNameMatch: true
-  AllowPredicates: false
-  AllowDSLWriters: false
-  IgnoreClassMethods: false
-  Whitelist:
-    - to_ary
-    - to_a
-    - to_c
-    - to_enum
-    - to_h
-    - to_hash
-    - to_i
-    - to_int
-    - to_io
-    - to_open
-    - to_path
-    - to_proc
-    - to_r
-    - to_regexp
-    - to_str
-    - to_s
-    - to_sym
-Style/VariableName:
-  EnforcedStyle: snake_case
-  SupportedStyles:
-    - snake_case
-    - camelCase
-Style/WhileUntilModifier:
-  MaxLineLength: 80
-Style/WordArray:
-  EnforcedStyle: percent
-  SupportedStyles:
-    - percent
-    - brackets
-  MinSize: 0
-  WordRegex: !ruby/regexp '/\A[\p{Word}\n\t]+\z/'
-Metrics/AbcSize:
-  Max: 15
-Metrics/BlockNesting:
-  Max: 3
-Metrics/ClassLength:
-  CountComments: false  # count full line comments?
-  Max: 100
-Metrics/ModuleLength:
-  CountComments: false  # count full line comments?
-  Max: 100
-Metrics/CyclomaticComplexity:
-  Max: 6
-Metrics/LineLength:
-  Max: 80
-  AllowHeredoc: true
-  AllowURI: true
-  URISchemes:
-    - http
-    - https
-Metrics/MethodLength:
-  CountComments: false  # count full line comments?
-  Max: 10
-Metrics/ParameterLists:
-  Max: 5
-  CountKeywordArgs: true
-Metrics/PerceivedComplexity:
-  Max: 7
-Lint/AssignmentInCondition:
-  AllowSafeAssignment: true
-Lint/EndAlignment:
-  AlignWith: keyword
-  SupportedStyles:
-    - keyword
-    - variable
-    - start_of_line
-  AutoCorrect: false
-Lint/DefEndAlignment:
-  AlignWith: start_of_line
-  SupportedStyles:
-    - start_of_line
-    - def
-  AutoCorrect: false
-Lint/UnusedBlockArgument:
-  IgnoreEmptyBlocks: true
-Lint/UnusedMethodArgument:
-  AllowUnusedKeywordArguments: false
-  IgnoreEmptyMethods: true
-Rails/ActionFilter:
-  EnforcedStyle: action
-  SupportedStyles:
-    - action
-    - filter
-  Include:
-    - app/controllers/**/*.rb
-Rails/Date:
-  EnforcedStyle: flexible
-  SupportedStyles:
-    - strict
-    - flexible
-Rails/FindBy:
-  Include:
-    - app/models/**/*.rb
-Rails/FindEach:
-  Include:
-    - app/models/**/*.rb
-Rails/HasAndBelongsToMany:
-  Include:
-    - app/models/**/*.rb
-Rails/Output:
-  Include:
-    - app/**/*.rb
-    - config/**/*.rb
-    - db/**/*.rb
-    - lib/**/*.rb
-Rails/ReadWriteAttribute:
-  Include:
-    - app/models/**/*.rb
-Rails/ScopeArgs:
-  Include:
-    - app/models/**/*.rb
-Rails/TimeZone:
-  EnforcedStyle: flexible
-  SupportedStyles:
-    - strict
-    - flexible
-Rails/Validation:
-  Include:
-    - app/models/**/*.rb