geminfo 0.1.0

data/path/gems/rspec-core-3.3.2/lib/rspec/core/project_initializer/spec/spec_helper.rb

@@ -0,0 +1,96 @@
+# This file was generated by the `rspec --init` command. Conventionally, all
+# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
+# The generated `.rspec` file contains `--require spec_helper` which will cause
+# this file to always be loaded, without a need to explicitly require it in any
+# files.
+#
+# Given that it is always loaded, you are encouraged to keep this file as
+# light-weight as possible. Requiring heavyweight dependencies from this file
+# will add to the boot time of your test suite on EVERY test run, even for an
+# individual file that may not need all of that loaded. Instead, consider making
+# a separate helper file that requires the additional dependencies and performs
+# the additional setup, and require it from the spec files that actually need
+# it.
+#
+# The `.rspec` file also contains a few flags that are not defaults but that
+# users commonly want.
+#
+# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
+RSpec.configure do |config|
+  # rspec-expectations config goes here. You can use an alternate
+  # assertion/expectation library such as wrong or the stdlib/minitest
+  # assertions if you prefer.
+  config.expect_with :rspec do |expectations|
+    # This option will default to `true` in RSpec 4. It makes the `description`
+    # and `failure_message` of custom matchers include text for helper methods
+    # defined using `chain`, e.g.:
+    #     be_bigger_than(2).and_smaller_than(4).description
+    #     # => "be bigger than 2 and smaller than 4"
+    # ...rather than:
+    #     # => "be bigger than 2"
+    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
+  end
+
+  # rspec-mocks config goes here. You can use an alternate test double
+  # library (such as bogus or mocha) by changing the `mock_with` option here.
+  config.mock_with :rspec do |mocks|
+    # Prevents you from mocking or stubbing a method that does not exist on
+    # a real object. This is generally recommended, and will default to
+    # `true` in RSpec 4.
+    mocks.verify_partial_doubles = true
+  end
+
+# The settings below are suggested to provide a good initial experience
+# with RSpec, but feel free to customize to your heart's content.
+=begin
+  # These two settings work together to allow you to limit a spec run
+  # to individual examples or groups you care about by tagging them with
+  # `:focus` metadata. When nothing is tagged with `:focus`, all examples
+  # get run.
+  config.filter_run :focus
+  config.run_all_when_everything_filtered = true
+
+  # Allows RSpec to persist some state between runs in order to support
+  # the `--only-failures` and `--next-failure` CLI options. We recommend
+  # you configure your source control system to ignore this file.
+  config.example_status_persistence_file_path = "spec/examples.txt"
+
+  # Limits the available syntax to the non-monkey patched syntax that is
+  # recommended. For more details, see:
+  #   - http://myronmars.to/n/dev-blog/2012/06/rspecs-new-expectation-syntax
+  #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
+  #   - http://myronmars.to/n/dev-blog/2014/05/notable-changes-in-rspec-3#new__config_option_to_disable_rspeccore_monkey_patching
+  config.disable_monkey_patching!
+
+  # This setting enables warnings. It's recommended, but in some cases may
+  # be too noisy due to issues in dependencies.
+  config.warnings = true
+
+  # Many RSpec users commonly either run the entire suite or an individual
+  # file, and it's useful to allow more verbose output when running an
+  # individual spec file.
+  if config.files_to_run.one?
+    # Use the documentation formatter for detailed output,
+    # unless a formatter has already been configured
+    # (e.g. via a command-line flag).
+    config.default_formatter = 'doc'
+  end
+
+  # Print the 10 slowest examples and example groups at the
+  # end of the spec run, to help surface which specs are running
+  # particularly slow.
+  config.profile_examples = 10
+
+  # Run specs in random order to surface order dependencies. If you find an
+  # order dependency and want to debug it, you can fix the order by providing
+  # the seed, which is printed after each run.
+  #     --seed 1234
+  config.order = :random
+
+  # Seed global randomization in this process using the `--seed` CLI option.
+  # Setting this allows you to use `--seed` to deterministically reproduce
+  # test failures related to randomization by passing the same `--seed` value
+  # as the one that triggered the failure.
+  Kernel.srand config.seed
+=end
+end

data/path/gems/rspec-core-3.3.2/lib/rspec/core/project_initializer.rb

@@ -0,0 +1,48 @@
+RSpec::Support.require_rspec_support "directory_maker"
+
+module RSpec
+  module Core
+    # @private
+    # Generates conventional files for an RSpec project.
+    class ProjectInitializer
+      attr_reader :destination, :stream, :template_path
+
+      DOT_RSPEC_FILE = '.rspec'
+      SPEC_HELPER_FILE =  'spec/spec_helper.rb'
+
+      def initialize(opts={})
+        @destination = opts.fetch(:destination, Dir.getwd)
+        @stream = opts.fetch(:report_stream, $stdout)
+        @template_path = opts.fetch(:template_path) do
+          File.expand_path("../project_initializer", __FILE__)
+        end
+      end
+
+      def run
+        copy_template DOT_RSPEC_FILE
+        copy_template SPEC_HELPER_FILE
+      end
+
+    private
+
+      def copy_template(file)
+        destination_file = File.join(destination, file)
+        return report_exists(file) if File.exist?(destination_file)
+
+        report_creating(file)
+        RSpec::Support::DirectoryMaker.mkdir_p(File.dirname(destination_file))
+        File.open(destination_file, 'w') do |f|
+          f.write File.read(File.join(template_path, file))
+        end
+      end
+
+      def report_exists(file)
+        stream.puts "   exist   #{file}"
+      end
+
+      def report_creating(file)
+        stream.puts "  create   #{file}"
+      end
+    end
+  end
+end

data/path/gems/rspec-core-3.3.2/lib/rspec/core/rake_task.rb

@@ -0,0 +1,158 @@
+require 'rake'
+require 'rake/tasklib'
+require 'rspec/support/ruby_features'
+require 'rspec/core/shell_escape'
+
+module RSpec
+  module Core
+    # RSpec rake task
+    #
+    # @see Rakefile
+    class RakeTask < ::Rake::TaskLib
+      include ::Rake::DSL if defined?(::Rake::DSL)
+      include RSpec::Core::ShellEscape
+
+      # Default path to the RSpec executable.
+      DEFAULT_RSPEC_PATH = File.expand_path('../../../../exe/rspec', __FILE__)
+
+      # Default pattern for spec files.
+      DEFAULT_PATTERN = 'spec/**{,/*/**}/*_spec.rb'
+
+      # Name of task. Defaults to `:spec`.
+      attr_accessor :name
+
+      # Files matching this pattern will be loaded.
+      # Defaults to `'spec/**{,/*/**}/*_spec.rb'`.
+      attr_accessor :pattern
+
+      # Files matching this pattern will be excluded.
+      # Defaults to `nil`.
+      attr_accessor :exclude_pattern
+
+      # Whether or not to fail Rake when an error occurs (typically when
+      # examples fail). Defaults to `true`.
+      attr_accessor :fail_on_error
+
+      # A message to print to stderr when there are failures.
+      attr_accessor :failure_message
+
+      # Use verbose output. If this is set to true, the task will print the
+      # executed spec command to stdout. Defaults to `true`.
+      attr_accessor :verbose
+
+      # Command line options to pass to ruby. Defaults to `nil`.
+      attr_accessor :ruby_opts
+
+      # Path to RSpec. Defaults to the absolute path to the
+      # rspec binary from the loaded rspec-core gem.
+      attr_accessor :rspec_path
+
+      # Command line options to pass to RSpec. Defaults to `nil`.
+      attr_accessor :rspec_opts
+
+      def initialize(*args, &task_block)
+        @name          = args.shift || :spec
+        @ruby_opts     = nil
+        @rspec_opts    = nil
+        @verbose       = true
+        @fail_on_error = true
+        @rspec_path    = DEFAULT_RSPEC_PATH
+        @pattern       = DEFAULT_PATTERN
+
+        define(args, &task_block)
+      end
+
+      # @private
+      def run_task(verbose)
+        command = spec_command
+        puts command if verbose
+
+        return if system(command)
+        puts failure_message if failure_message
+
+        return unless fail_on_error
+        $stderr.puts "#{command} failed" if verbose
+        exit $?.exitstatus
+      end
+
+    private
+
+      # @private
+      def define(args, &task_block)
+        desc "Run RSpec code examples" unless ::Rake.application.last_comment
+
+        task name, *args do |_, task_args|
+          RakeFileUtils.__send__(:verbose, verbose) do
+            task_block.call(*[self, task_args].slice(0, task_block.arity)) if task_block
+            run_task verbose
+          end
+        end
+      end
+
+      def file_inclusion_specification
+        if ENV['SPEC']
+          FileList[ ENV['SPEC']].sort
+        elsif String === pattern && !File.exist?(pattern)
+          "--pattern #{escape pattern}"
+        else
+          # Before RSpec 3.1, we used `FileList` to get the list of matched
+          # files, and then pass that along to the `rspec` command. Starting
+          # with 3.1, we prefer to pass along the pattern as-is to the `rspec`
+          # command, for 3 reasons:
+          #
+          #   * It's *much* less verbose to pass one `--pattern` option than a
+          #     long list of files.
+          #   * It ensures `task.pattern` and `--pattern` have the same
+          #     behavior.
+          #   * It fixes a bug, where
+          #     `task.pattern = pattern_that_matches_no_files` would run *all*
+          #     files because it would cause no pattern or file args to get
+          #     passed to `rspec`, which causes all files to get run.
+          #
+          # However, `FileList` is *far* more flexible than the `--pattern`
+          # option. Specifically, it supports individual files and directories,
+          # as well as arrays of files, directories and globs, as well as other
+          # `FileList` objects.
+          #
+          # For backwards compatibility, we have to fall back to using FileList
+          # if the user has passed a `pattern` option that will not work with
+          # `--pattern`.
+          #
+          # TODO: consider deprecating support for this and removing it in
+          #   RSpec 4.
+          FileList[pattern].sort.map { |file| escape file }
+        end
+      end
+
+      def file_exclusion_specification
+        " --exclude-pattern #{escape exclude_pattern}" if exclude_pattern
+      end
+
+      def spec_command
+        cmd_parts = []
+        cmd_parts << RUBY
+        cmd_parts << ruby_opts
+        cmd_parts << rspec_load_path
+        cmd_parts << escape(rspec_path)
+        cmd_parts << file_inclusion_specification
+        cmd_parts << file_exclusion_specification
+        cmd_parts << rspec_opts
+        cmd_parts.flatten.reject(&blank).join(" ")
+      end
+
+      def blank
+        lambda { |s| s.nil? || s == "" }
+      end
+
+      def rspec_load_path
+        @rspec_load_path ||= begin
+          core_and_support = $LOAD_PATH.grep(
+            /#{File::SEPARATOR}rspec-(core|support)[^#{File::SEPARATOR}]*#{File::SEPARATOR}lib/
+          ).uniq
+
+          "-I#{core_and_support.map { |file| escape file }.join(File::PATH_SEPARATOR)}"
+        end
+      end
+    end
+  end
+end

data/path/gems/rspec-core-3.3.2/lib/rspec/core/reentrant_mutex.rb

@@ -0,0 +1,52 @@
+module RSpec
+  module Core
+    # Allows a thread to lock out other threads from a critical section of code,
+    # while allowing the thread with the lock to reenter that section.
+    #
+    # Based on Monitor as of 2.2 - https://github.com/ruby/ruby/blob/eb7ddaa3a47bf48045d26c72eb0f263a53524ebc/lib/monitor.rb#L9
+    #
+    # Depends on Mutex, but Mutex is only available as part of core since 1.9.1:
+    #   exists - http://ruby-doc.org/core-1.9.1/Mutex.html
+    #   dne    - http://ruby-doc.org/core-1.9.0/Mutex.html
+    #
+    # @private
+    class ReentrantMutex
+      def initialize
+        @owner = nil
+        @count = 0
+        @mutex = Mutex.new
+      end
+
+      def synchronize
+        enter
+        yield
+      ensure
+        exit
+      end
+
+    private
+
+      def enter
+        @mutex.lock if @owner != Thread.current
+        @owner = Thread.current
+        @count += 1
+      end
+
+      def exit
+        @count -= 1
+        return unless @count == 0
+        @owner = nil
+        @mutex.unlock
+      end
+    end
+
+    if defined? ::Mutex
+      # On 1.9 and up, this is in core, so we just use the real one
+      Mutex = ::Mutex
+    else # For 1.8.7
+      # :nocov:
+      RSpec::Support.require_rspec_core "mutex"
+      # :nocov:
+    end
+  end
+end

data/path/gems/rspec-core-3.3.2/lib/rspec/core/reporter.rb

@@ -0,0 +1,220 @@
+module RSpec::Core
+  # A reporter will send notifications to listeners, usually formatters for the
+  # spec suite run.
+  class Reporter
+    # @private
+    RSPEC_NOTIFICATIONS = Set.new(
+      [
+        :close, :deprecation, :deprecation_summary, :dump_failures, :dump_pending,
+        :dump_profile, :dump_summary, :example_failed, :example_group_finished,
+        :example_group_started, :example_passed, :example_pending, :example_started,
+        :message, :seed, :start, :start_dump, :stop
+      ])
+
+    def initialize(configuration)
+      @configuration = configuration
+      @listeners = Hash.new { |h, k| h[k] = Set.new }
+      @examples = []
+      @failed_examples = []
+      @pending_examples = []
+      @duration = @start = @load_time = nil
+    end
+
+    # @private
+    attr_reader :examples, :failed_examples, :pending_examples
+
+    # @private
+    def reset
+      @examples = []
+      @failed_examples = []
+      @pending_examples = []
+      @profiler = Profiler.new if defined?(@profiler)
+    end
+
+    # @private
+    def setup_profiler
+      @profiler = Profiler.new
+      register_listener @profiler, *Profiler::NOTIFICATIONS
+    end
+
+    # Registers a listener to a list of notifications. The reporter will send
+    # notification of events to all registered listeners.
+    #
+    # @param listener [Object] An obect that wishes to be notified of reporter
+    #   events
+    # @param notifications [Array] Array of symbols represents the events a
+    #   listener wishes to subscribe too
+    def register_listener(listener, *notifications)
+      notifications.each do |notification|
+        @listeners[notification.to_sym] << listener
+      end
+      true
+    end
+
+    # @private
+    def registered_listeners(notification)
+      @listeners[notification].to_a
+    end
+
+    # @overload report(count, &block)
+    # @overload report(count, &block)
+    # @param expected_example_count [Integer] the number of examples being run
+    # @yield [Block] block yields itself for further reporting.
+    #
+    # Initializes the report run and yields itself for further reporting. The
+    # block is required, so that the reporter can manage cleaning up after the
+    # run.
+    #
+    # @example
+    #
+    #     reporter.report(group.examples.size) do |r|
+    #       example_groups.map {|g| g.run(r) }
+    #     end
+    #
+    def report(expected_example_count)
+      start(expected_example_count)
+      begin
+        yield self
+      ensure
+        finish
+      end
+    end
+
+    # @private
+    def start(expected_example_count, time=RSpec::Core::Time.now)
+      @start = time
+      @load_time = (@start - @configuration.start_time).to_f
+      notify :seed, Notifications::SeedNotification.new(@configuration.seed, seed_used?)
+      notify :start, Notifications::StartNotification.new(expected_example_count, @load_time)
+    end
+
+    # @param message [#to_s] A message object to send to formatters
+    #
+    # Send a custom message to supporting formatters.
+    def message(message)
+      notify :message, Notifications::MessageNotification.new(message)
+    end
+
+    # @param event [Symbol] Name of the custom event to trigger on formatters
+    # @param options [Hash] Hash of arguments to provide via `CustomNotification`
+    #
+    # Publish a custom event to supporting registered formatters.
+    # @see RSpec::Core::Notifications::CustomNotification
+    def publish(event, options={})
+      if RSPEC_NOTIFICATIONS.include? event
+        raise "RSpec::Core::Reporter#publish is intended for sending custom " \
+              "events not internal RSpec ones, please rename your custom event."
+      end
+      notify event, Notifications::CustomNotification.for(options)
+    end
+
+    # @private
+    def example_group_started(group)
+      notify :example_group_started, Notifications::GroupNotification.new(group) unless group.descendant_filtered_examples.empty?
+    end
+
+    # @private
+    def example_group_finished(group)
+      notify :example_group_finished, Notifications::GroupNotification.new(group) unless group.descendant_filtered_examples.empty?
+    end
+
+    # @private
+    def example_started(example)
+      @examples << example
+      notify :example_started, Notifications::ExampleNotification.for(example)
+    end
+
+    # @private
+    def example_passed(example)
+      notify :example_passed, Notifications::ExampleNotification.for(example)
+    end
+
+    # @private
+    def example_failed(example)
+      @failed_examples << example
+      notify :example_failed, Notifications::ExampleNotification.for(example)
+    end
+
+    # @private
+    def example_pending(example)
+      @pending_examples << example
+      notify :example_pending, Notifications::ExampleNotification.for(example)
+    end
+
+    # @private
+    def deprecation(hash)
+      notify :deprecation, Notifications::DeprecationNotification.from_hash(hash)
+    end
+
+    # @private
+    def finish
+      close_after do
+        stop
+        notify :start_dump,    Notifications::NullNotification
+        notify :dump_pending,  Notifications::ExamplesNotification.new(self)
+        notify :dump_failures, Notifications::ExamplesNotification.new(self)
+        notify :deprecation_summary, Notifications::NullNotification
+        unless mute_profile_output?
+          notify :dump_profile, Notifications::ProfileNotification.new(@duration, @examples,
+                                                                       @configuration.profile_examples,
+                                                                       @profiler.example_groups)
+        end
+        notify :dump_summary, Notifications::SummaryNotification.new(@duration, @examples, @failed_examples,
+                                                                     @pending_examples, @load_time)
+        notify :seed, Notifications::SeedNotification.new(@configuration.seed, seed_used?)
+      end
+    end
+
+    # @private
+    def close_after
+      yield
+    ensure
+      close
+    end
+
+    # @private
+    def stop
+      @duration = (RSpec::Core::Time.now - @start).to_f if @start
+      notify :stop, Notifications::ExamplesNotification.new(self)
+    end
+
+    # @private
+    def notify(event, notification)
+      registered_listeners(event).each do |formatter|
+        formatter.__send__(event, notification)
+      end
+    end
+
+    # @private
+    def abort_with(msg, exit_status)
+      message(msg)
+      close
+      exit!(exit_status)
+    end
+
+  private
+
+    def close
+      notify :close, Notifications::NullNotification
+    end
+
+    def mute_profile_output?
+      # Don't print out profiled info if there are failures and `--fail-fast` is
+      # used, it just clutters the output.
+      !@configuration.profile_examples? || (@configuration.fail_fast? && @failed_examples.size > 0)
+    end
+
+    def seed_used?
+      @configuration.seed && @configuration.seed_used?
+    end
+  end
+
+  # @private
+  # # Used in place of a {Reporter} for situations where we don't want reporting output.
+  class NullReporter
+    def self.method_missing(*)
+      # ignore
+    end
+    private_class_method :method_missing
+  end
+end

data/path/gems/rspec-core-3.3.2/lib/rspec/core/ruby_project.rb

@@ -0,0 +1,53 @@
+# This is borrowed (slightly modified) from Scott Taylor's
+# project_path project:
+#   http://github.com/smtlaissezfaire/project_path
+module RSpec
+  module Core
+    # @private
+    module RubyProject
+      def add_to_load_path(*dirs)
+        dirs.map { |dir| add_dir_to_load_path(File.join(root, dir)) }
+      end
+
+      def add_dir_to_load_path(dir)
+        $LOAD_PATH.unshift(dir) unless $LOAD_PATH.include?(dir)
+      end
+
+      def root
+        @project_root ||= determine_root
+      end
+
+      def determine_root
+        find_first_parent_containing('spec') || '.'
+      end
+
+      def find_first_parent_containing(dir)
+        ascend_until { |path| File.exist?(File.join(path, dir)) }
+      end
+
+      def ascend_until
+        fs = File::SEPARATOR
+        escaped_slash = "\\#{fs}"
+        special = "_RSPEC_ESCAPED_SLASH_"
+        project_path = File.expand_path(".")
+        parts = project_path.gsub(escaped_slash, special).squeeze(fs).split(fs).map do |x|
+          x.gsub(special, escaped_slash)
+        end
+
+        until parts.empty?
+          path = parts.join(fs)
+          path = fs if path == ""
+          return path if yield(path)
+          parts.pop
+        end
+      end
+
+      module_function :add_to_load_path
+      module_function :add_dir_to_load_path
+      module_function :root
+      module_function :determine_root
+      module_function :find_first_parent_containing
+      module_function :ascend_until
+    end
+  end
+end