gemba 0.1.0 → 0.2.0

data/vendor/rcheevos/test/libretro.h

@@ -0,0 +1,205 @@
+/**
+ * Provides copies of structures and constants from
+ * https://github.com/libretro/RetroArch/blob/master/libretro-common/include/libretro.h
+ * for unit testing without pulling in the entire libretro project.
+ */
+
+#ifndef LIBRETRO_H__
+#define LIBRETRO_H__
+
+#include <stdint.h>
+#include <stddef.h>
+#include <stdlib.h>
+#include <limits.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Regular save RAM. This RAM is usually found on a game cartridge,
+ * backed up by a battery.
+ * If save game data is too complex for a single memory buffer,
+ * the SAVE_DIRECTORY (preferably) or SYSTEM_DIRECTORY environment
+ * callback can be used. */
+#define RETRO_MEMORY_SAVE_RAM    0
+
+/* Some games have a built-in clock to keep track of time.
+ * This memory is usually just a couple of bytes to keep track of time.
+ */
+#define RETRO_MEMORY_RTC         1
+
+/* System ram lets a frontend peek into a game systems main RAM. */
+#define RETRO_MEMORY_SYSTEM_RAM  2
+
+/* Video ram lets a frontend peek into a game systems video RAM (VRAM). */
+#define RETRO_MEMORY_VIDEO_RAM   3
+
+
+#define RETRO_MEMDESC_CONST      (1 << 0)   /* The frontend will never change this memory area once retro_load_game has returned. */
+#define RETRO_MEMDESC_BIGENDIAN  (1 << 1)   /* The memory area contains big endian data. Default is little endian. */
+#define RETRO_MEMDESC_SYSTEM_RAM (1 << 2)   /* The memory area is system RAM.  This is main RAM of the gaming system. */
+#define RETRO_MEMDESC_SAVE_RAM   (1 << 3)   /* The memory area is save RAM. This RAM is usually found on a game cartridge, backed up by a battery. */
+#define RETRO_MEMDESC_VIDEO_RAM  (1 << 4)   /* The memory area is video RAM (VRAM) */
+#define RETRO_MEMDESC_ALIGN_2    (1 << 16)  /* All memory access in this area is aligned to their own size, or 2, whichever is smaller. */
+#define RETRO_MEMDESC_ALIGN_4    (2 << 16)
+#define RETRO_MEMDESC_ALIGN_8    (3 << 16)
+#define RETRO_MEMDESC_MINSIZE_2  (1 << 24)  /* All memory in this region is accessed at least 2 bytes at the time. */
+#define RETRO_MEMDESC_MINSIZE_4  (2 << 24)
+#define RETRO_MEMDESC_MINSIZE_8  (3 << 24)
+struct retro_memory_descriptor
+{
+   uint64_t flags;
+
+   /* Pointer to the start of the relevant ROM or RAM chip.
+    * It's strongly recommended to use 'offset' if possible, rather than
+    * doing math on the pointer.
+    *
+    * If the same byte is mapped my multiple descriptors, their descriptors
+    * must have the same pointer.
+    * If 'start' does not point to the first byte in the pointer, put the
+    * difference in 'offset' instead.
+    *
+    * May be NULL if there's nothing usable here (e.g. hardware registers and
+    * open bus). No flags should be set if the pointer is NULL.
+    * It's recommended to minimize the number of descriptors if possible,
+    * but not mandatory. */
+   void *ptr;
+   size_t offset;
+
+   /* This is the location in the emulated address space
+    * where the mapping starts. */
+   size_t start;
+
+   /* Which bits must be same as in 'start' for this mapping to apply.
+    * The first memory descriptor to claim a certain byte is the one
+    * that applies.
+    * A bit which is set in 'start' must also be set in this.
+    * Can be zero, in which case each byte is assumed mapped exactly once.
+    * In this case, 'len' must be a power of two. */
+   size_t select;
+
+   /* If this is nonzero, the set bits are assumed not connected to the
+    * memory chip's address pins. */
+   size_t disconnect;
+
+   /* This one tells the size of the current memory area.
+    * If, after start+disconnect are applied, the address is higher than
+    * this, the highest bit of the address is cleared.
+    *
+    * If the address is still too high, the next highest bit is cleared.
+    * Can be zero, in which case it's assumed to be infinite (as limited
+    * by 'select' and 'disconnect'). */
+   size_t len;
+
+   /* To go from emulated address to physical address, the following
+    * order applies:
+    * Subtract 'start', pick off 'disconnect', apply 'len', add 'offset'. */
+
+   /* The address space name must consist of only a-zA-Z0-9_-,
+    * should be as short as feasible (maximum length is 8 plus the NUL),
+    * and may not be any other address space plus one or more 0-9A-F
+    * at the end.
+    * However, multiple memory descriptors for the same address space is
+    * allowed, and the address space name can be empty. NULL is treated
+    * as empty.
+    *
+    * Address space names are case sensitive, but avoid lowercase if possible.
+    * The same pointer may exist in multiple address spaces.
+    *
+    * Examples:
+    * blank+blank - valid (multiple things may be mapped in the same namespace)
+    * 'Sp'+'Sp' - valid (multiple things may be mapped in the same namespace)
+    * 'A'+'B' - valid (neither is a prefix of each other)
+    * 'S'+blank - valid ('S' is not in 0-9A-F)
+    * 'a'+blank - valid ('a' is not in 0-9A-F)
+    * 'a'+'A' - valid (neither is a prefix of each other)
+    * 'AR'+blank - valid ('R' is not in 0-9A-F)
+    * 'ARB'+blank - valid (the B can't be part of the address either, because
+    *                      there is no namespace 'AR')
+    * blank+'B' - not valid, because it's ambigous which address space B1234
+    *             would refer to.
+    * The length can't be used for that purpose; the frontend may want
+    * to append arbitrary data to an address, without a separator. */
+   const char *addrspace;
+
+   /* TODO: When finalizing this one, add a description field, which should be
+    * "WRAM" or something roughly equally long. */
+
+   /* TODO: When finalizing this one, replace 'select' with 'limit', which tells
+    * which bits can vary and still refer to the same address (limit = ~select).
+    * TODO: limit? range? vary? something else? */
+
+   /* TODO: When finalizing this one, if 'len' is above what 'select' (or
+    * 'limit') allows, it's bankswitched. Bankswitched data must have both 'len'
+    * and 'select' != 0, and the mappings don't tell how the system switches the
+    * banks. */
+
+   /* TODO: When finalizing this one, fix the 'len' bit removal order.
+    * For len=0x1800, pointer 0x1C00 should go to 0x1400, not 0x0C00.
+    * Algorithm: Take bits highest to lowest, but if it goes above len, clear
+    * the most recent addition and continue on the next bit.
+    * TODO: Can the above be optimized? Is "remove the lowest bit set in both
+    * pointer and 'len'" equivalent? */
+
+   /* TODO: Some emulators (MAME?) emulate big endian systems by only accessing
+    * the emulated memory in 32-bit chunks, native endian. But that's nothing
+    * compared to Darek Mihocka <http://www.emulators.com/docs/nx07_vm101.htm>
+    * (section Emulation 103 - Nearly Free Byte Reversal) - he flips the ENTIRE
+    * RAM backwards! I'll want to represent both of those, via some flags.
+    *
+    * I suspect MAME either didn't think of that idea, or don't want the #ifdef.
+    * Not sure which, nor do I really care. */
+
+   /* TODO: Some of those flags are unused and/or don't really make sense. Clean
+    * them up. */
+};
+
+/* The frontend may use the largest value of 'start'+'select' in a
+ * certain namespace to infer the size of the address space.
+ *
+ * If the address space is larger than that, a mapping with .ptr=NULL
+ * should be at the end of the array, with .select set to all ones for
+ * as long as the address space is big.
+ *
+ * Sample descriptors (minus .ptr, and RETRO_MEMFLAG_ on the flags):
+ * SNES WRAM:
+ * .start=0x7E0000, .len=0x20000
+ * (Note that this must be mapped before the ROM in most cases; some of the
+ * ROM mappers
+ * try to claim $7E0000, or at least $7E8000.)
+ * SNES SPC700 RAM:
+ * .addrspace="S", .len=0x10000
+ * SNES WRAM mirrors:
+ * .flags=MIRROR, .start=0x000000, .select=0xC0E000, .len=0x2000
+ * .flags=MIRROR, .start=0x800000, .select=0xC0E000, .len=0x2000
+ * SNES WRAM mirrors, alternate equivalent descriptor:
+ * .flags=MIRROR, .select=0x40E000, .disconnect=~0x1FFF
+ * (Various similar constructions can be created by combining parts of
+ * the above two.)
+ * SNES LoROM (512KB, mirrored a couple of times):
+ * .flags=CONST, .start=0x008000, .select=0x408000, .disconnect=0x8000, .len=512*1024
+ * .flags=CONST, .start=0x400000, .select=0x400000, .disconnect=0x8000, .len=512*1024
+ * SNES HiROM (4MB):
+ * .flags=CONST,                 .start=0x400000, .select=0x400000, .len=4*1024*1024
+ * .flags=CONST, .offset=0x8000, .start=0x008000, .select=0x408000, .len=4*1024*1024
+ * SNES ExHiROM (8MB):
+ * .flags=CONST, .offset=0,                  .start=0xC00000, .select=0xC00000, .len=4*1024*1024
+ * .flags=CONST, .offset=4*1024*1024,        .start=0x400000, .select=0xC00000, .len=4*1024*1024
+ * .flags=CONST, .offset=0x8000,             .start=0x808000, .select=0xC08000, .len=4*1024*1024
+ * .flags=CONST, .offset=4*1024*1024+0x8000, .start=0x008000, .select=0xC08000, .len=4*1024*1024
+ * Clarify the size of the address space:
+ * .ptr=NULL, .select=0xFFFFFF
+ * .len can be implied by .select in many of them, but was included for clarity.
+ */
+
+struct retro_memory_map
+{
+   const struct retro_memory_descriptor *descriptors;
+   unsigned num_descriptors;
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif