gem_repackager 0.1.0

data/support/gems/rspec-core-2.11.1/lib/rspec/core/formatters/progress_formatter.rb

@@ -0,0 +1,32 @@
+require 'rspec/core/formatters/base_text_formatter'
+module RSpec
+  module Core
+    module Formatters
+
+      class ProgressFormatter < BaseTextFormatter
+
+        def example_passed(example)
+          super(example)
+          output.print green('.')
+        end
+
+        def example_pending(example)
+          super(example)
+          output.print yellow('*')
+        end
+
+        def example_failed(example)
+          super(example)
+          output.print red('F')
+        end
+
+        def start_dump
+          super()
+          output.puts
+        end
+
+      end
+
+    end
+  end
+end

data/support/gems/rspec-core-2.11.1/lib/rspec/core/formatters/snippet_extractor.rb

@@ -0,0 +1,58 @@
+module RSpec
+  module Core
+    module Formatters
+      # This class extracts code snippets by looking at the backtrace of the passed error
+      class SnippetExtractor
+        class NullConverter; def convert(code, pre); code; end; end
+        
+        begin
+          require 'syntax/convertors/html'
+          @@converter = Syntax::Convertors::HTML.for_syntax "ruby"
+        rescue LoadError
+          @@converter = NullConverter.new
+        end
+
+        def snippet(backtrace)
+          raw_code, line = snippet_for(backtrace[0])
+          highlighted = @@converter.convert(raw_code, false)
+          highlighted << "\n<span class=\"comment\"># gem install syntax to get syntax highlighting</span>" if @@converter.is_a?(NullConverter)
+          post_process(highlighted, line)
+        end
+
+        def snippet_for(error_line)
+          if error_line =~ /(.*):(\d+)/
+            file = $1
+            line = $2.to_i
+            [lines_around(file, line), line]
+          else
+            ["# Couldn't get snippet for #{error_line}", 1]
+          end
+        end
+
+        def lines_around(file, line)
+          if File.file?(file)
+            lines = File.read(file).split("\n")
+            min = [0, line-3].max
+            max = [line+1, lines.length-1].min
+            selected_lines = []
+            selected_lines.join("\n")
+            lines[min..max].join("\n")
+          else
+            "# Couldn't get snippet for #{file}"
+          end
+        end
+
+        def post_process(highlighted, offending_line)
+          new_lines = []
+          highlighted.split("\n").each_with_index do |line, i|
+            new_line = "<span class=\"linenum\">#{offending_line+i-2}</span>#{line}"
+            new_line = "<span class=\"offending\">#{new_line}</span>" if i == 2
+            new_lines << new_line
+          end
+          new_lines.join("\n")
+        end
+
+      end
+    end
+  end
+end

data/support/gems/rspec-core-2.11.1/lib/rspec/core/formatters/text_mate_formatter.rb

@@ -0,0 +1,34 @@
+require 'cgi'
+require 'rspec/core/formatters/html_formatter'
+
+module RSpec
+  module Core
+    module Formatters
+      # Formats backtraces so they're clickable by TextMate
+      class TextMateFormatter < HtmlFormatter
+        def backtrace_line(line, skip_textmate_conversion=false)
+          if skip_textmate_conversion
+            super(line)
+          else
+            format_backtrace_line_for_textmate(super(line))
+          end
+        end
+
+        def format_backtrace_line_for_textmate(line)
+          return nil unless line
+          CGI.escapeHTML(line).sub(/([^:]*\.e?rb):(\d*)/) do
+            "<a href=\"txmt://open?url=file://#{File.expand_path($1)}&line=#{$2}\">#{$1}:#{$2}</a> "
+          end
+        end
+
+        def extra_failure_content(exception)
+          require 'rspec/core/formatters/snippet_extractor'
+          backtrace = exception.backtrace.map {|line| backtrace_line(line, :skip_textmate_conversion)}
+          backtrace.compact!
+          @snippet_extractor ||= SnippetExtractor.new
+          "    <pre class=\"ruby\"><code>#{@snippet_extractor.snippet(backtrace)}</code></pre>"
+        end
+      end
+    end
+  end
+end

data/support/gems/rspec-core-2.11.1/lib/rspec/core/hooks.rb

@@ -0,0 +1,495 @@
+module RSpec
+  module Core
+    module Hooks
+      include MetadataHashBuilder::WithConfigWarning
+
+      module HookExtension
+        attr_reader :options
+
+        def with(options)
+          @options = options
+          self
+        end
+
+        def options_apply?(example_or_group)
+          example_or_group.all_apply?(options)
+        end
+      end
+
+      module BeforeHookExtension
+        include HookExtension
+
+        def run(example)
+          example.instance_eval(&self)
+        end
+
+        def display_name
+          "before hook"
+        end
+      end
+
+      module AfterHookExtension
+        include HookExtension
+
+        def run(example)
+          example.instance_eval_with_rescue("in an after hook", &self)
+        end
+
+        def display_name
+          "after hook"
+        end
+      end
+
+      module AroundHookExtension
+        include HookExtension
+
+        def display_name
+          "around hook"
+        end
+      end
+
+      module HookCollectionAliases
+        def self.included(host)
+          host.send :alias_method, :prepend, :unshift
+          host.send :alias_method, :append,  :push
+        end
+      end
+
+      class HookCollection < Array
+        include HookCollectionAliases
+
+        def for(example_or_group)
+          self.class.new(select {|hook| hook.options_apply?(example_or_group)}).
+            with(example_or_group)
+        end
+
+        def with(example)
+          @example = example
+          self
+        end
+
+        def run
+          each {|h| h.run(@example) } unless empty?
+        end
+      end
+
+      class AroundHookCollection < Array
+        include HookCollectionAliases
+
+        def for(example, initial_procsy=nil)
+          self.class.new(select {|hook| hook.options_apply?(example)}).
+            with(example, initial_procsy)
+        end
+
+        def with(example, initial_procsy)
+          @example = example
+          @initial_procsy = initial_procsy
+          self
+        end
+
+        def run
+          inject(@initial_procsy) do |procsy, around_hook|
+            Example.procsy(procsy.metadata) do
+              @example.instance_eval_with_args(procsy, &around_hook)
+            end
+          end.call
+        end
+      end
+
+      class GroupHookCollection < Array
+        def for(group)
+          @group = group
+          self
+        end
+
+        def run
+          shift.run(@group) until empty?
+        end
+      end
+
+      module RegistersGlobals
+        def register_globals host, globals
+          [:before, :after, :around].each do |position|
+            process host, globals, position, :each
+            next if position == :around # no around(:all) hooks
+            process host, globals, position, :all
+          end
+        end
+
+        private
+        def process host, globals, position, scope
+          globals[position][scope].each do |hook|
+            unless host.ancestors.any? { |a| a.hooks[position][scope].include? hook }
+              self[position][scope] << hook if scope == :each || hook.options_apply?(host)
+            end
+          end
+        end
+      end
+
+      # @private
+      def hooks
+        @hooks ||= {
+          :around => { :each => AroundHookCollection.new },
+          :before => { :each => HookCollection.new, :all => HookCollection.new, :suite => HookCollection.new },
+          :after =>  { :each => HookCollection.new, :all => HookCollection.new, :suite => HookCollection.new }
+        }.extend(RegistersGlobals)
+      end
+
+      # @api public
+      # @overload before(&block)
+      # @overload before(scope, &block)
+      # @overload before(scope, conditions, &block)
+      # @overload before(conditions, &block)
+      #
+      # @param [Symbol] scope `:each`, `:all`, or `:suite` (defaults to `:each`)
+      # @param [Hash] conditions
+      #   constrains this hook to examples matching these conditions e.g.
+      #   `before(:each, :ui => true) { ... }` will only run with examples or
+      #   groups declared with `:ui => true`.
+      #
+      # @see #after
+      # @see #around
+      # @see ExampleGroup
+      # @see SharedContext
+      # @see SharedExampleGroup
+      # @see Configuration
+      #
+      # Declare a block of code to be run before each example (using `:each`)
+      # or once before any example (using `:all`). These are usually declared
+      # directly in the {ExampleGroup} to which they apply, but they can also
+      # be shared across multiple groups.
+      #
+      # You can also use `before(:suite)` to run a block of code before any
+      # example groups are run. This should be declared in {RSpec.configure}
+      #
+      # Instance variables declared in `before(:each)` or `before(:all)` are
+      # accessible within each example.
+      #
+      # ### Order
+      #
+      # `before` hooks are stored in three scopes, which are run in order:
+      # `:suite`, `:all`, and `:each`. They can also be declared in several
+      # different places: `RSpec.configure`, a parent group, the current group.
+      # They are run in the following order:
+      #
+      #     before(:suite) # declared in RSpec.configure
+      #     before(:all)   # declared in RSpec.configure
+      #     before(:all)   # declared in a parent group
+      #     before(:all)   # declared in the current group
+      #     before(:each)  # declared in RSpec.configure
+      #     before(:each)  # declared in a parent group
+      #     before(:each)  # declared in the current group
+      #
+      # If more than one `before` is declared within any one scope, they are run
+      # in the order in which they are declared.
+      #
+      # ### Conditions
+      #
+      # When you add a conditions hash to `before(:each)` or `before(:all)`,
+      # RSpec will only apply that hook to groups or examples that match the
+      # conditions. e.g.
+      #
+      #     RSpec.configure do |config|
+      #       config.before(:each, :authorized => true) do
+      #         log_in_as :authorized_user
+      #       end
+      #     end
+      #
+      #     describe Something, :authorized => true do
+      #       # the before hook will run in before each example in this group
+      #     end
+      #
+      #     describe SomethingElse do
+      #       it "does something", :authorized => true do
+      #         # the before hook will run before this example
+      #       end
+      #
+      #       it "does something else" do
+      #         # the hook will not run before this example
+      #       end
+      #     end
+      #
+      # ### Warning: `before(:suite, :with => :conditions)`
+      #
+      # The conditions hash is used to match against specific examples. Since
+      # `before(:suite)` is not run in relation to any specific example or
+      # group, conditions passed along with `:suite` are effectively ignored.
+      #
+      # ### Exceptions
+      #
+      # When an exception is raised in a `before` block, RSpec skips any
+      # subsequent `before` blocks and the example, but runs all of the
+      # `after(:each)` and `after(:all)` hooks.
+      #
+      # ### Warning: implicit before blocks
+      #
+      # `before` hooks can also be declared in shared contexts which get
+      # included implicitly either by you or by extension libraries. Since
+      # RSpec runs these in the order in which they are declared within each
+      # scope, load order matters, and can lead to confusing results when one
+      # before block depends on state that is prepared in another before block
+      # that gets run later.
+      #
+      # ### Warning: `before(:all)`
+      #
+      # It is very tempting to use `before(:all)` to speed things up, but we
+      # recommend that you avoid this as there are a number of gotchas, as well
+      # as things that simply don't work.
+      #
+      # #### context
+      #
+      # `before(:all)` is run in an example that is generated to provide group
+      # context for the block.
+      #
+      # #### instance variables
+      #
+      # Instance variables declared in `before(:all)` are shared across all the
+      # examples in the group.  This means that each example can change the
+      # state of a shared object, resulting in an ordering dependency that can
+      # make it difficult to reason about failures.
+      #
+      # ### other frameworks
+      #
+      # Mock object frameworks and database transaction managers (like
+      # ActiveRecord) are typically designed around the idea of setting up
+      # before an example, running that one example, and then tearing down.
+      # This means that mocks and stubs can (sometimes) be declared in
+      # `before(:all)`, but get torn down before the first real example is ever
+      # run.
+      #
+      # You _can_ create database-backed model objects in a `before(:all)` in
+      # rspec-rails, but it will not be wrapped in a transaction for you, so
+      # you are on your own to clean up in an `after(:all)` block.
+      #
+      # @example before(:each) declared in an {ExampleGroup}
+      #
+      #     describe Thing do
+      #       before(:each) do
+      #         @thing = Thing.new
+      #       end
+      #
+      #       it "does something" do
+      #         # here you can access @thing
+      #       end
+      #     end
+      #
+      # @example before(:all) declared in an {ExampleGroup}
+      #
+      #     describe Parser do
+      #       before(:all) do
+      #         File.open(file_to_parse, 'w') do |f|
+      #           f.write <<-CONTENT
+      #             stuff in the file
+      #           CONTENT
+      #         end
+      #       end
+      #
+      #       it "parses the file" do
+      #         Parser.parse(file_to_parse)
+      #       end
+      #
+      #       after(:all) do
+      #         File.delete(file_to_parse)
+      #       end
+      #     end
+      def before(*args, &block)
+        register_hook :append, :before, *args, &block
+      end
+
+      alias_method :append_before, :before
+
+      # Adds `block` to the front of the list of `before` blocks in the same
+      # scope (`:each`, `:all`, or `:suite`).
+      #
+      # See #before for scoping semantics.
+      def prepend_before(*args, &block)
+        register_hook :prepend, :before, *args, &block
+      end
+
+      # @api public
+      # @overload after(&block)
+      # @overload after(scope, &block)
+      # @overload after(scope, conditions, &block)
+      # @overload after(conditions, &block)
+      #
+      # @param [Symbol] scope `:each`, `:all`, or `:suite` (defaults to `:each`)
+      # @param [Hash] conditions
+      #   constrains this hook to examples matching these conditions e.g.
+      #   `after(:each, :ui => true) { ... }` will only run with examples or
+      #   groups declared with `:ui => true`.
+      #
+      # @see #before
+      # @see #around
+      # @see ExampleGroup
+      # @see SharedContext
+      # @see SharedExampleGroup
+      # @see Configuration
+      #
+      # Declare a block of code to be run after each example (using `:each`) or
+      # once after all examples (using `:all`). See
+      # [#before](Hooks#before-instance_method) for more information about
+      # ordering.
+      #
+      # ### Exceptions
+      #
+      # `after` hooks are guaranteed to run even when there are exceptions in
+      # `before` hooks or examples.  When an exception is raised in an after
+      # block, the exception is captured for later reporting, and subsequent
+      # `after` blocks are run.
+      #
+      # ### Order
+      #
+      # `after` hooks are stored in three scopes, which are run in order:
+      # `:each`, `:all`, and `:suite`. They can also be declared in several
+      # different places: `RSpec.configure`, a parent group, the current group.
+      # They are run in the following order:
+      #
+      #     after(:each) # declared in the current group
+      #     after(:each) # declared in a parent group
+      #     after(:each) # declared in RSpec.configure
+      #     after(:all)  # declared in the current group
+      #     after(:all)  # declared in a parent group
+      #     after(:all)  # declared in RSpec.configure
+      #
+      # This is the reverse of the order in which `before` hooks are run.
+      # Similarly, if more than one `after` is declared within any one scope,
+      # they are run in reverse order of that in which they are declared.
+      def after(*args, &block)
+        register_hook :prepend, :after, *args, &block
+      end
+
+      alias_method :prepend_after, :after
+
+      # Adds `block` to the back of the list of `after` blocks in the same
+      # scope (`:each`, `:all`, or `:suite`).
+      #
+      # See #after for scoping semantics.
+      def append_after(*args, &block)
+        register_hook :append, :after, *args, &block
+      end
+
+      # @api public
+      # @overload around(&block)
+      # @overload around(scope, &block)
+      # @overload around(scope, conditions, &block)
+      # @overload around(conditions, &block)
+      #
+      # @param [Symbol] scope `:each` (defaults to `:each`)
+      #   present for syntax parity with `before` and `after`, but `:each` is
+      #   the only supported value.
+      #
+      # @param [Hash] conditions
+      #   constrains this hook to examples matching these conditions e.g.
+      #   `around(:each, :ui => true) { ... }` will only run with examples or
+      #   groups declared with `:ui => true`.
+      #
+      # @yield [Example] the example to run
+      #
+      # @note the syntax of `around` is similar to that of `before` and `after`
+      #   but the semantics are quite different. `before` and `after` hooks are
+      #   run in the context of of the examples with which they are associated,
+      #   whereas `around` hooks are actually responsible for running the
+      #   examples. Consequently, `around` hooks do not have direct access to
+      #   resources that are made available within the examples and their
+      #   associated `before` and `after` hooks.
+      #
+      # @note `:each` is the only supported scope.
+      #
+      # Declare a block of code, parts of which will be run before and parts
+      # after the example. It is your responsibility to run the example:
+      #
+      #     around(:each) do |ex|
+      #       # do some stuff before
+      #       ex.run
+      #       # do some stuff after
+      #     end
+      #
+      # The yielded example aliases `run` with `call`, which lets you treat it
+      # like a `Proc`.  This is especially handy when working with libaries
+      # that manage their own setup and teardown using a block or proc syntax,
+      # e.g.
+      #
+      #     around(:each) {|ex| Database.transaction(&ex)}
+      #     around(:each) {|ex| FakeFS(&ex)}
+      #
+      def around(*args, &block)
+        register_hook :prepend, :around, *args, &block
+      end
+
+      # @private
+      #
+      # Runs all of the blocks stored with the hook in the context of the
+      # example. If no example is provided, just calls the hook directly.
+      def run_hook(hook, scope, example_or_group=ExampleGroup.new, initial_procsy=nil)
+        find_hook(hook, scope, example_or_group, initial_procsy).run
+      end
+
+      # @private
+      def around_each_hooks_for(example, initial_procsy=nil)
+        AroundHookCollection.new(ancestors.map {|a| a.hooks[:around][:each]}.flatten).for(example, initial_procsy)
+      end
+
+    private
+
+      SCOPES = [:each, :all, :suite]
+
+      EXTENSIONS = {
+        :before => BeforeHookExtension,
+        :after  => AfterHookExtension,
+        :around => AroundHookExtension
+      }
+
+      def before_all_hooks_for(group)
+        GroupHookCollection.new(hooks[:before][:all]).for(group)
+      end
+
+      def after_all_hooks_for(group)
+        GroupHookCollection.new(hooks[:after][:all]).for(group)
+      end
+
+      def before_each_hooks_for(example)
+        HookCollection.new(ancestors.reverse.map {|a| a.hooks[:before][:each]}.flatten).for(example)
+      end
+
+      def after_each_hooks_for(example)
+        HookCollection.new(ancestors.map {|a| a.hooks[:after][:each]}.flatten).for(example)
+      end
+
+      def register_hook prepend_or_append, hook, *args, &block
+        scope, options = scope_and_options_from(*args)
+        hooks[hook][scope].send(prepend_or_append, block.extend(EXTENSIONS[hook]).with(options))
+      end
+
+      def find_hook(hook, scope, example_or_group, initial_procsy)
+        case [hook, scope]
+        when [:before, :all]
+          before_all_hooks_for(example_or_group)
+        when [:after, :all]
+          after_all_hooks_for(example_or_group)
+        when [:around, :each]
+          around_each_hooks_for(example_or_group, initial_procsy)
+        when [:before, :each]
+          before_each_hooks_for(example_or_group)
+        when [:after, :each]
+          after_each_hooks_for(example_or_group)
+        when [:before, :suite], [:after, :suite]
+          hooks[hook][:suite].with(example_or_group)
+        end
+      end
+
+      def scope_and_options_from(*args)
+        return extract_scope_from(args), build_metadata_hash_from(args)
+      end
+
+      def extract_scope_from(args)
+        if SCOPES.include?(args.first)
+          args.shift
+        elsif args.any? { |a| a.is_a?(Symbol) }
+          raise ArgumentError.new("You must explicitly give a scope (:each, :all, or :suite) when using symbols as metadata for a hook.")
+        else
+          :each
+        end
+      end
+    end
+  end
+end