fxruby 1.6.19-x86-mingw32

data/rdoc-sources/FXIconSource.rb

@@ -0,0 +1,100 @@
+module Fox
+  #
+  # An icon source is an object that loads an icon of any type.
+  # It exists purely for convenience, to make loading icons
+  # simpler by concentrating the knowledge of the supported
+  # icon formats in a single place.
+  # Needless to say, this class is subclassable, allowing users
+  # to add additional icon types and make them available to
+  # all widgets which deal with icons.
+  # Note, the icons are loaded, but _not_ created (realized) yet;
+  # this allows users to manipulate the pixel data prior to
+  # realizing the icons.
+  #
+  class FXIconSource < FXObject
+    #
+    # Construct an icon source, given a reference to the application object.
+    #
+    def initialize(app) # :yields: theIconSource
+    end
+    
+    #
+    # Load an icon from the file _filename_. By default, the file extension is
+    # stripped and used as the icon _type_; if an explicit icon type is forced,
+    # then that type is used and the extension is ignored.
+    # For example, loadIcon("icon", "gif") will try to load a CompuServe GIF
+    # file, since the filename does not give any clue as to the type of the
+    # icon.
+    # Returns a reference to the icon.
+    #
+    def loadIconFile(filename, type=nil); end
+
+    #
+    # Load an icon of a given type (e.g. "gif") from reswrapped data.
+    # Returns +nil+ if there's some error loading the icon. (The optional
+    # _type_ parameter is actually mandatory at the time of this writing; future
+    # versions will attempt to inspect the first few bytes of the stream
+    # to divine the icon format if the parameter is omitted).
+    # Returns a reference to the icon.
+    #
+    def loadIconData(pixels, type=nil); end
+
+    #
+    # Load an icon of a given type (e.g. "gif") from an already open stream.
+    # Returns +nil+ if there's some error loading the icon. (The optional
+    # _type_ parameter is actually mandatory at the time of this writing; future
+    # versions will attempt to inspect the first few bytes of the stream
+    # to divine the icon format if the parameter is omitted).
+    # Returns a reference to the icon.
+    #
+    def loadIconStream(store, type=nil); end
+
+    #
+    # Load an image from the file filename. By default, the file extension is
+    # stripped and used as the image type; if an explicit image type is forced,
+    # then that type is used and the extension is ignored.
+    # For example, loadImage("image","gif") will try to load a CompuServe GIF
+    # file, since the filename does not give any clue as to the type of the
+    # image.
+    #
+    def loadImageFile(filename, type=nil); end
+
+    #
+    # Load an image of a given type (e.g. "gif") from reswrapped data.
+    # Returns +nil+ if there's some error loading the icon. (The optional
+    # parameter is actually mandatory at the time of this writing; future
+    # versions will attempt to inspect the first few bytes of the stream
+    # to divine the icon format if the parameter is omitted).
+    #
+    def loadImageData(pixels, type=nil); end
+  
+    #
+    # Load an image of a given type (e.g. "gif") from an already open stream.
+    # Returns +nil+ if there's some error loading the image. (The optional
+    # parameter is actually mandatory at the time of this writing; future
+    # versions will attempt to inspect the first few bytes of the stream
+    # to divine the image format if the parameter is omitted).
+    #
+    def loadImageStream(store, type=nil); end
+
+    # Load icon and scale it such that its dimensions do not exceed given size
+    def loadScaledIconFile(filename, size=32, qual=0, type=nil); end
+
+    # Load icon and scale it such that its dimensions do not exceed given size
+    def loadScaledIconData(pixels, size=32, qual=0, type=nil); end
+
+    # Load icon and scale it such that its dimensions do not exceed given size
+    def loadScaledIconStream(store, size=32, qual=0, type=nil); end
+
+    # Load image and scale it such that its dimensions do not exceed given size
+    def loadScaledImageFile(filename, size=32, qual=0, type=nil); end
+
+    # Load image and scale it such that its dimensions do not exceed given size
+    def loadScaledImageData(pixels, size=32, qual=0, type=nil); end
+
+    # Load image and scale it such that its dimensions do not exceed given size
+    def loadScaledImageStream(store, size=32, qual=0, type=nil); end
+  end
+end
+
+

data/rdoc-sources/FXId.rb

@@ -0,0 +1,34 @@
+module Fox
+  #
+  # Encapsulates a server side resource.
+  #
+  class FXId < FXObject
+
+    # Application [FXApp]
+    attr_reader :app
+
+    # User data [Object]  
+    attr_accessor :userData
+
+    # XID handle for the server-side resource [Integer]
+    attr_reader :xid
+
+    #
+    # Create resource.
+    #
+    def create(); end
+
+    # Returns true if this resource has been created.
+    def created?; end
+
+    #
+    # Detach resource.
+    #
+    def detach(); end
+
+    #
+    # Destroy resource.
+    #
+    def destroy(); end
+  end
+end

data/rdoc-sources/FXImage.rb

@@ -0,0 +1,292 @@
+module Fox
+  #
+  # An Image is a rectangular array of pixels.  It supports two representations
+  # of these pixels: a client-side pixel buffer which is stored as an array of
+  # FXColor, and a server-side pixmap which is stored in an organization directly
+  # compatible with the screen, for fast drawing onto the device.
+  # The server-side representation is not directly accessible from the current
+  # process as it lives in the process of the X Server or GDI.
+  #
+  # === Image rendering hints
+  #
+  # +IMAGE_KEEP+::
+  #   Keep pixel data in client. By default, FOX discards of the client-side
+  #   pixel data for an image after you call create() for that image. When the
+  #   +IMAGE_KEEP+ option is set for FXImage (or one of its subclasses), the
+  #   client-side buffer is maintained. You will typically want to set this option
+  #   if you intend to do repeated re-rendering of the image after it has been
+  #   created.
+  # +IMAGE_OWNED+::
+  #   If the +IMAGE_OWNED+ option is set, the FXImage object assumes ownership
+  #   of its client-side pixel data (if any).
+  # +IMAGE_DITHER+::
+  #   Dither image to look better
+  # +IMAGE_NEAREST+::
+  #   Turn off dithering and map to nearest color
+  # +IMAGE_OPAQUE+::
+  #   Force opaque background
+  # +IMAGE_ALPHACOLOR+::
+  #   By default, FOX will use the transparency color obtained from the image
+  #   file as the transparency (alpha) color. If you pass the +IMAGE_ALPHACOLOR+
+  #   flag, the user-specified transparency color will be used instead.
+  # +IMAGE_SHMI+::
+  #   Using shared memory image
+  # +IMAGE_SHMP+::
+  #   Using shared memory pixmap
+  # +IMAGE_ALPHAGUESS+::
+  #   Guess transparency color from corners
+  #
+
+  class FXImage < FXDrawable
+
+    # Pixel data [FXMemoryBuffer]
+    attr_reader	:data
+    
+    # Option flags [Integer]
+    attr_accessor :options
+    
+    #
+    # Create an image.  If a client-side pixel buffer has been specified,
+    # the image does not own the pixel buffer unless the +IMAGE_OWNED+ flag is
+    # set.  If the +IMAGE_OWNED+ flag is set but a +nil+ pixel buffer is
+    # passed, a pixel buffer will be automatically created and will be owned
+    # by the image. The flags +IMAGE_SHMI+ and +IMAGE_SHMP+ may be specified for
+    # large images to instruct #render to use shared memory to communicate
+    # with the server.
+    #
+    # ==== Parameters:
+    #
+    # +a+::		an application instance [FXApp]
+    # +pixels+::	pixels [Array of FXColor values]
+    # +opts+::		image options [Integer]
+    # +width+::		image width [Integer]
+    # +height+::		image height [Integer]
+    #
+    def initialize(a, pixels=nil, opts=0, width=1, height=1) # :yields: theImage
+    end
+
+    #
+    # Return the color of the pixel at (_x_, _y_).
+    #
+    # ==== Parameters:
+    #
+    # +x+::	x-coordinate of the pixel of interest [Integer]
+    # +y+::	y-coordinate of the pixel of interest [Integer]
+    #
+    def getPixel(x, y) ; end
+
+    #
+    # Set pixel at (_x_, _y_) to _clr_.
+    #
+    # ==== Parameters:
+    #
+    # +x+::	x-coordinate of the pixel of interest [Integer]
+    # +y+::	y-coordinate of the pixel of interest [Integer]
+    # +clr+::	new color value for this pixel [FXColor]
+    #
+    def setPixel(x, y, clr) ; end
+    
+    # Scan the image and return +false+ if it's fully opaque.
+    def hasAlpha?; end
+
+    #
+    # Restore client-side pixel buffer from image.
+    # This operation overwrites any current values for the client-side
+    # pixel buffer with values corresponding to the server-side image.
+    # If the image data is +nil+ at the time #restore is called, the
+    # image will first allocate an (owned) pixel buffer to use for this
+    # operation.
+    #
+    def restore() ; end
+
+    #
+    # Render the image from client-side pixel buffer, if there is data
+    # and if the image width and height are greater than zero.
+    #
+    def render() ; end
+  
+    #
+    # Release the client-side pixels buffer, free it if it was owned
+    # (i.e. if the +IMAGE_OWNED+ option is set)..
+    # If it is not owned, the image just forgets about the buffer.
+    #
+    def release(); end
+
+    #
+    # Rescale pixels image to the specified width and height and then
+    # re-render the server-side image from the client-side pixel buffer. Note that this
+    # serves a slightly different purpose than the base class resize() method,
+    # which simply resizes the client-side pixel data buffer but doesn't
+    # transform the image.
+    #
+    # The optional third argument specifies the _quality_ of the scaling algorithm
+    # used. By default, #scale uses a fast (but low quality) nearest-neighbor algorithm
+    # for scaling the image to its new size. To use the higher-quality scaling algorithm
+    # from FOX 1.0, you should pass in a value of 1 as the third argument to #scale.
+    #
+    # ==== Parameters:
+    #
+    # +width+::		new image width, in pixels [Integer]
+    # +height+::		new image height, in pixels [Integer]
+    # +quality+::	scaling algorithm quality, either 0 or 1 (see above) [Integer]
+    #
+    def scale(w, h, quality=0) ; end
+  
+    #
+    # Mirror image horizontally and/or vertically and then re-render the
+    # server-side image from the client-side pixel buffer.
+    #
+    # ==== Parameters:
+    #
+    # +horizontal+::	if +true+, the image will be flipped from left to right [Boolean]
+    # +vertical+::	if +true+, the image will be flipped from top to bottom [Boolean]
+    #
+    def mirror(horizontal, vertical) ; end
+  
+    #
+    # Rotate image counter-clockwise by some number of degrees and then
+    # re-render the server-side image from the client-side pixel buffer.
+    #
+    # ==== Parameters:
+    #
+    # +degrees+::	number of degrees by which to rotate the image [Integer]
+    #
+    def rotate(degrees) ; end
+  
+    #
+    # Crop image to given rectangle and then re-render the server-side image
+    # from the client-side pixel buffer. This method calls resize() to adjust the client
+    # and server side representations.  The new image may be smaller or larger
+    # than the old one; blank areas are filled with color. There must be at
+    # least one pixel of overlap between the old and the new image.
+    #
+    # ==== Parameters:
+    #
+    # +x+::	x-coordinate for top left corner of the clip rectangle [Integer]
+    # +y+::	y-coordinate for top left corner of the clip rectangle [Integer]
+    # +width+::	width of the clip rectangle [Integer]
+    # +height+::	height of the clip rectangle [Integer]
+    # +color+::	fill color for blank areas after crop [FXColor]
+    #
+    def crop(x, y, w, h, color=0) ; end
+    
+    # Fill image with uniform color.
+    def fill(color); end
+    
+    #
+    # Fade an image to a certain color by a certain factor. The _factor_ is
+    # some integer value between 0 and 255 inclusive, where a factor of 255 indicates no fading and a factor
+    # of zero indicates that the image is completely faded to the fade _color_.
+    #
+    # ==== Parameters:
+    #
+    # +color+::   the fade color [FXColor]
+    # +factor+::	fading factor [Integer]
+    #
+    def fade(color, factor=255); end
+
+    #
+    # Shear image horizontally and then re-render the server-side image
+    # from the client-side pixel buffer. The number of pixels is equal to the
+    # _shear_ parameter times 256. The area outside the image is filled
+    # with transparent black, unless another _color_ is specified.
+    #
+    # ==== Parameters:
+    #
+    # +shear+::   how far to shear [Integer]
+    # +color+::	  fill color for areas outside the sheared image [FXColor]
+    #
+    def xshear(shear, color=0); end
+
+    #
+    # Shear image verticallyand then re-render the server-side image
+    # from the client-side pixel buffer. The number of pixels is equal to the
+    # _shear_ parameter times 256. The area outside the image is filled
+    # with transparent black, unless another _color_ is specified.
+    #
+    # ==== Parameters:
+    #
+    # +shear+::   how far to shear [Integer]
+    # +color+::	  fill color for areas outside the sheared image [FXColor]
+    #
+    def yshear(shear, color=0); end
+
+    #
+    # Fill image using a horizontal gradient.
+    #
+    # ==== Parameters:
+    #
+    # +left+::   starting color, for leftmost pixels [FXColor]
+    # +right+::  ending color, for rightmost pixels [FXColor]
+    #
+    def hgradient(left, right); end
+
+    #
+    # Fill image using a vertical gradient.
+    #
+    # ==== Parameters:
+    #
+    # +top+::      starting color, for topmost pixels [FXColor]
+    # +bottom+::	 ending color, for bottommost pixels [FXColor]
+    #
+    def vgradient(top, bottom); end
+
+    #
+    # Fill image using a bilinear gradient.
+    #
+    # ==== Parameters:
+    #
+    # +topleft+::      pixel color for top-left corner [FXColor]
+    # +topright+::	   pixel color for top-right corner [FXColor]
+    # +bottomleft+::   pixel color for bottom-left corner [FXColor]
+    # +bottomright+::  pixel color for bottom-right corner [FXColor]
+    #
+    def gradient(topleft, topright, bottomleft, bottomright); end
+
+    #
+    # Blend image over uniform color.
+    #
+    # ==== Parameters:
+    #
+    # +color+::	  the blended color [FXColor]
+    #
+    def blend(color); end
+  
+    #
+    # Save pixel data to a stream.
+    #
+    # Note that the base class version of
+    # #savePixels saves the pixel data as-is, without any image format
+    # specific information. For example, if you have a 1024x768 image
+    # without an alpha channel (and thus only the red, green and blue
+    # channels) the total number of bytes written to the stream will be
+    # 1024*768*3*8. The behavior of #savePixels is different for subclasses
+    # such as FXPNGImage, where #savePixels will instead save the image
+    # data in a specific image file format (i.e. the PNG file format).
+    #
+    # ==== Parameters:
+    #
+    # +store+::	opened stream to which to save the pixel data [FXStream]
+    #
+    def savePixels(store) ; end
+  
+    #
+    # Load pixel data from a stream.
+    #
+    # Note that the base class version of
+    # #loadPixels expects to read the the pixel data in a neutral format
+    # (i.e. without any image format specific information). For example, if
+    # you have a 1024x768 image without an alpha channel (and thus only the
+    # red, green and blue channels), #loadPixels will attempt to read a total
+    # of 1024*768*3*8 bytes from the stream. The behavior of #loadPixels is
+    # different for subclasses such as FXPNGImage, where #loadPixels will instead
+    # expects to read the image data in a specific image file format (i.e. the
+    # PNG file format).
+    #
+    # ==== Parameters:
+    #
+    # +store+::	opened stream from which to read the pixel data [FXStream]
+    #
+    def loadPixels(store) ; end
+  end
+end

data/rdoc-sources/FXImageFrame.rb

@@ -0,0 +1,36 @@
+module Fox
+  #
+  # An FXImageFrame is a simple frame widget that displays an FXImage image.
+  #
+  class FXImageFrame < FXFrame
+  
+    # The current image being displayed [FXImage]
+    attr_accessor :image
+    
+    #
+    # The current justification mode, some combination of the flags
+    # +JUSTIFY_LEFT+, +JUSTIFY_RIGHT+, +JUSTIFY_TOP+ and +JUSTIFY_BOTTOM+ [Integer]
+    #
+    attr_accessor :justify
+    
+    #
+    # Return an initialized FXImageFrame instance.
+    #
+    # ==== Parameters:
+    #
+    # +p+::         the parent window for this image frame [FXComposite]
+    # +img+::       the image to display [FXImage]
+    # +opts+::	    frame options [Integer]
+    # +x+::	        initial x-position [Integer]
+    # +y+::	        initial y-position [Integer]
+    # +width+::	    initial width [Integer]
+    # +height+::	  initial height [Integer]
+    # +padLeft+::	  internal padding on the left side, in pixels [Integer]
+    # +padRight+::	internal padding on the right side, in pixels [Integer]
+    # +padTop+::	  internal padding on the top side, in pixels [Integer]
+    # +padBottom+::	internal padding on the bottom side, in pixels [Integer]
+    #
+    def initialize(p, img, opts=FRAME_SUNKEN|FRAME_THICK, x=0, y=0, width=0, height=0, padLeft=0, padRight=0, padTop=0, padBottom=0) # :yields: theImageFrame
+    end
+  end
+end