fragrant 0.0.4 → 0.0.5

data/vendor/bundle/ruby/1.9.1/gems/vagrant-1.0.5/templates/locales/en.yml

@@ -0,0 +1,747 @@
+en:
+  vagrant:
+    general:
+      moving_home_dir: "Moving old Vagrant home directory to new location: %{directory}"
+      home_dir_migration_failed: |-
+        Both an old and new Vagrant home directory exist. Only the new one will
+        be used. Please merge the old directory into the new directory if you'd
+        like to use the old data as well.
+
+        Old: %{old}
+        New: %{new}
+
+#-------------------------------------------------------------------------------
+# Translations for exception classes
+#-------------------------------------------------------------------------------
+    errors:
+      base_vm_not_found: The base VM with the name '%{name}' was not found.
+      box_not_found: Box '%{name}' could not be found.
+      cli_invalid_options: |-
+        An invalid option was specified. The help for this command
+        is available below.
+
+        %{help}
+      cli_invalid_usage: |-
+        This command was not invoked properly. The help for this command is
+        available below.
+
+        %{help}
+      config_validation: |-
+        There was a problem with the configuration of Vagrant. The error message(s)
+        are printed below:
+
+        %{messages}
+      deprecation: |-
+        You are using a feature that has been removed in this version. Explanation:
+
+        %{message}
+        Note that this error message will not appear in the next version of Vagrant.
+      destroy_requires_force: |-
+        Destroy doesn't have a TTY to ask for confirmation. Please pass the
+        `--force` flag to force a destroy, otherwise attach a TTY so that
+        the destroy can be confirmed.
+      dotfile_is_directory: |-
+        The local file Vagrant uses to store data ".vagrant" already exists
+        and is a directory! If you are in your home directory, then please run
+        this command in another directory. If you aren't in a home directory,
+        then please rename ".vagrant" to something else, or configure Vagrant
+        to use another filename by modifying `config.vagrant.dotfile_name`.
+      environment_locked: |-
+        An instance of Vagrant is already running. Only one instance of Vagrant
+        may run at any given time to avoid problems with VirtualBox inconsistencies
+        occurring. Please wait for the other instance of Vagrant to end and then
+        try again.
+      gem_command_in_bundler: |-
+        You cannot run the `vagrant gem` command while in a bundler environment.
+        Bundler messes around quite a bit with the RubyGem load paths and gems
+        installed via `vagrant gem` are excluded by Bundler.
+
+        Instead, please include your Vagrant plugins in your Gemfile itself.
+      guest:
+        invalid_class: |-
+          The specified guest class does not inherit from `Vagrant::Guest::Base`.
+          The specified guest class must inherit from this class.
+
+          The specified guest class was: %{guest}
+        unknown_type: |-
+          The specified guest type is unknown: %{guest}. Please change this
+          to a proper value.
+        unspecified: |-
+          A VM guest type must be specified! This is done via the `config.vm.guest`
+          configuration value. Please read the documentation online for more information.
+      home_dir_not_accessible: |-
+        The home directory you specified is not accessible. The home
+        directory that Vagrant uses must be both readable and writable.
+
+        You specified: %{home_path}
+      interrupted: |-
+        Vagrant exited after cleanup due to external interrupt.
+      multi_vm_required: |-
+        A multi-vm environment is required for name specification to this command.
+      multi_vm_target_required: |-
+        This command requires a specific VM name to target in a multi-VM environment.
+      no_env: |-
+        A Vagrant environment is required to run this command. Run `vagrant init`
+        to set one up.
+      port_collision_resume: |-
+        This VM cannot be resumed, because the forwarded ports would collide with
+        another running virtual machine. Normally, Vagrant will attempt to fix this
+        for you but VirtualBox only allows forwarded ports to change if the VM is
+        powered off. Therefore, please reload your VM or halt the other running
+        VMs to continue.
+      scp_unavailable: |-
+        SSH server on the guest doesn't support SCP. Please install the necessary
+        software to enable SCP on your guest operating system.
+      shared_folder_create_failed: |-
+        Failed to create the following shared folder on the host system. This is
+        usually because Vagrant does not have sufficient permissions to create
+        the folder.
+
+        %{path}
+
+        Please create the folder manually or specify another path to share.
+      ssh_authentication_failed: |-
+        SSH authentication failed! This is typically caused by the public/private
+        keypair for the SSH user not being properly set on the guest VM. Please
+        verify that the guest VM is setup with the proper public key, and that
+        the private key path for Vagrant is setup properly as well.
+      ssh_bad_exit_status: |-
+        The following SSH command responded with a non-zero exit status.
+        Vagrant assumes that this means the command failed!
+
+        %{command}
+      ssh_connection_refused: |-
+        SSH connection was refused! This usually happens if the VM failed to
+        boot properly. Some steps to try to fix this: First, try reloading your
+        VM with `vagrant reload`, since a simple restart sometimes fixes things.
+        If that doesn't work, destroy your VM and recreate it with a `vagrant destroy`
+        followed by a `vagrant up`. If that doesn't work, contact a Vagrant
+        maintainer (support channels listed on the website) for more assistance.
+      ssh_key_bad_permissions: |-
+        The private key to connect to this box via SSH has invalid permissions
+        set on it. The permissions of the private key should be set to 0600, otherwise SSH will
+        ignore the key. Vagrant tried to do this automatically for you but failed. Please set the
+        permissions on the following file to 0600 and then try running this command again:
+
+        %{key_path}
+      ssh_key_type_not_supported: |-
+        The private key you're attempting to use with this Vagrant box uses
+        an unsupported encryption type. The SSH library Vagrant uses does not support
+        this key type. Please use `ssh-rsa` or `ssh-dss` instead.
+      ssh_port_not_detected: |-
+        Vagrant couldn't determine the SSH port for your VM! Vagrant attempts to
+        automatically find a forwarded port that matches your `config.ssh.guest_port`
+        (default: 22) value and uses this for SSH. Alternatively, if `config.ssh.port`
+        is set, it will use this.
+
+        However, in this case Vagrant was unable to find a forwarded port that matches
+        the guest port and `config.ssh.port` is not set!
+
+        Please make sure that you have a forwarded port that goes to the configured
+        guest port value, or specify an explicit SSH port with `config.ssh.port`.
+      ssh_unavailable: "`ssh` binary could not be found. Is an SSH client installed?"
+      ssh_unavailable_windows: |-
+        `vagrant ssh` isn't available on the Windows platform. You are still able
+        to SSH into the virtual machine if you get a Windows SSH client (such as
+        PuTTY). The authentication information is shown below:
+
+        Host: %{host}
+        Port: %{port}
+        Username: %{username}
+        Private key: %{key_path}
+      ui_expects_tty: |-
+        Vagrant is attempting to interface with the UI in a way that requires
+        a TTY. Most actions in Vagrant that require a TTY have configuration
+        switches to disable this requirement. Please do that or run Vagrant
+        with TTY.
+      vagrantfile_exists: |-
+        `Vagrantfile` already exists in this directory. Remove it before
+        running `vagrant init`.
+      vagrantfile_syntax_error: |-
+        There is a syntax error in the following Vagrantfile. The syntax error
+        message is reproduced below for convenience:
+
+        %{file}
+      vboxmanage_error: |-
+        There was an error executing the following command with VBoxManage:
+
+        %{command}
+
+        For more information on the failure, enable detailed logging with
+        VAGRANT_LOG.
+      virtualbox_invalid_version: |-
+        Vagrant has detected that you have a version of VirtualBox installed
+        that is not supported. Please install one of the supported versions
+        listed below to use Vagrant:
+
+        %{supported_versions}
+      virtualbox_kernel_module_not_loaded: |-
+        VirtualBox is complaining that the kernel module is not loaded. Please
+        run `VBoxManage --version` to see the error message which should contain
+        instructions on how to fix this error.
+      virtualbox_not_detected: |-
+        Vagrant could not detect VirtualBox! Make sure VirtualBox is properly installed.
+        Vagrant uses the `VBoxManage` binary that ships with VirtualBox, and requires
+        this to be available on the PATH. If VirtualBox is installed, please find the
+        `VBoxManage` binary and add it to the PATH environmental variable.
+      vm_creation_required: |-
+        VM must be created before running this command. Run `vagrant up` first.
+      vm_inaccessible: |-
+        Your VM has become "inaccessible." Unfortunately, this is a critical error
+        with VirtualBox that Vagrant can not cleanly recover from. Please open VirtualBox
+        and clear out your inaccessible virtual machines or find a way to fix
+        them.
+      vm_no_match: |-
+        No virtual machines matched the regular expression given.
+      vm_not_found: |-
+        A VM by the name of %{name} was not found.
+      vm_not_running: |-
+        VM must be running to open SSH connection. Run `vagrant up`
+        to start the virtual machine.
+
+#-------------------------------------------------------------------------------
+# Translations for config validation errors
+#-------------------------------------------------------------------------------
+    config:
+      common:
+        error_empty: "`%{field}` must be filled in."
+      chef:
+        cookbooks_path_empty: "Must specify a cookbooks path for chef solo."
+        run_list_empty: "Run list must not be empty."
+        server_url_empty: "Chef server URL must be populated."
+        vagrant_as_json_key: |-
+          `vagrant` cannot be a JSON key, because it is used by Vagrant already.
+        validation_key_path: "Validation key path must be valid path to your chef server validation key."
+      ssh:
+        private_key_missing: "`private_key_path` file must exist: %{path}"
+      vm:
+        base_mac_invalid: "Base MAC address for eth0/NAT must be set. Contact box maintainer for more information."
+        boot_mode_invalid: "Boot mode must be one of: headless or gui"
+        box_missing: "A box must be specified."
+        box_not_found: "The box '%{name}' could not be found."
+        network_invalid: |-
+          The network type '%{type}' is not valid. Please use
+          'hostonly' or 'bridged'.
+        network_ip_required: |-
+          Host only networks require an IP as an argument.
+        network_ip_invalid: |-
+          The host only network IP '%{ip}' is invalid.
+        network_ip_ends_one: |-
+          The host only network IP '%{ip}' must not end in a 1, as this
+          is reserved for the host machine.
+        shared_folder_hostpath_missing: "Shared folder host path for '%{name}' doesn't exist: %{path}"
+        shared_folder_nfs_owner_group: |-
+          Shared folder '%{name}': NFS does not support the owner/group settings.
+        provisioner_not_found: "The provisioner '%{shortcut}' doesn't exist."
+        provisioner_invalid_class: "The provisioner '%{shortcut}' must inherit from `Vagrant::Provisioners::Base`."
+
+#-------------------------------------------------------------------------------
+# Translations for commands. e.g. `vagrant x`
+#-------------------------------------------------------------------------------
+    commands:
+      common:
+        vm_not_created: "VM not created. Moving on..."
+        vm_not_running: "VM is not currently running. Please bring it up to run this command."
+      box:
+        no_installed_boxes: "There are no installed boxes! Use `vagrant box add` to add some."
+      destroy:
+        confirmation: "Are you sure you want to destroy the '%{name}' VM? [Y/N] "
+        will_not_destroy: |-
+          The VM '%{name}' will not be destroyed, since the confirmation
+          was declined.
+      gem:
+        help_preamble: |-
+          `vagrant gem` is used to install Vagrant plugins via the RubyGems
+          system. In fact, `vagrant gem` is just a frontend to the actual `gem`
+          interface, with the difference being that Vagrant sets up a custom
+          directory where gems are installed so that they are isolated from your
+          system gems.
+      init:
+        success: |-
+          A `Vagrantfile` has been placed in this directory. You are now
+          ready to `vagrant up` your first virtual environment! Please read
+          the comments in the Vagrantfile as well as documentation on
+          `vagrantup.com` for more information on using Vagrant.
+      status:
+        aborted: |-
+          The VM is in an aborted state. This means that it was abruptly
+          stopped without properly closing the session. Run `vagrant up`
+          to resume this virtual machine. If any problems persist, you may
+          have to destroy and restart the virtual machine.
+        gurumeditation: |-
+          The VM is in the "guru meditation" state. This is a rare case which means
+          that an internal error in VitualBox caused the VM to fail. This is always
+          the sign of a bug in VirtualBox. You can try to bring your VM back online
+          with a `vagrant up`.
+        inaccessible: |-
+          The VM is inaccessible! This is a rare case which means that VirtualBox
+          can't find your VM configuration. This usually happens when upgrading
+          VirtualBox, moving to a new computer, etc. Please consult VirtualBox
+          for how to handle this issue.
+        output: |-
+          Current VM states:
+
+          %{states}
+
+          %{message}
+        not_created: |-
+          The environment has not yet been created. Run `vagrant up` to
+          create the environment.
+        paused: |-
+          The VM is paused. This VM may have been paused via the VirtualBox
+          GUI or the VBoxManage command line interface. To unpause, please
+          use the VirtualBox GUI and/or VBoxManage command line interface so
+          that vagrant would be able to control the VM again.
+        poweroff: |-
+          The VM is powered off. To restart the VM, simply run `vagrant up`
+        running: |-
+          The VM is running. To stop this VM, you can run `vagrant halt` to
+          shut it down forcefully, or you can run `vagrant suspend` to simply
+          suspend the virtual machine. In either case, to restart it again,
+          simply run `vagrant up`.
+        saving: |-
+          The VM is currently saving its state. In a few moments this state
+          should transition to "saved." Please run `vagrant status` again
+          in a few seconds.
+        saved: |-
+          To resume this VM, simply run `vagrant up`.
+        stuck: |-
+          The VM is "stuck!" This is a very rare state which means that
+          VirtualBox is unable to recover the current state of the VM.
+          The only known solution to this problem is to restart your
+          machine, sorry.
+        listing: |-
+          This environment represents multiple VMs. The VMs are all listed
+          above with their current state. For more information about a specific
+          VM, run `vagrant status NAME`.
+      up:
+        vm_created: "VM already created. Booting if it's not already running..."
+      version:
+        output: "Vagrant version %{version}"
+
+#-------------------------------------------------------------------------------
+# Translations for Vagrant middleware acions
+#-------------------------------------------------------------------------------
+    actions:
+      runner:
+        waiting_cleanup: "Waiting for cleanup before exiting..."
+        exit_immediately: "Exiting immediately, without cleanup!"
+      vm:
+        boot:
+          booting: Booting VM...
+          waiting: Waiting for VM to boot. This can take a few minutes.
+          ready: VM booted and ready for use!
+          failed: Failed to connect to VM!
+          failed_to_boot: |-
+            Failed to connect to VM via SSH. Please verify the VM successfully booted
+            by looking at the VirtualBox GUI.
+          failed_to_run: |-
+            The VM failed to remain in the "running" state while attempting to boot.
+            This is normally caused by a misconfiguration or host system incompatibilities.
+            Please open the VirtualBox GUI and attempt to boot the virtual machine
+            manually to get a more informative error message.
+        bridged_networking:
+          available: |-
+            Available bridged network interfaces:
+          bridging: |-
+            Bridging adapter #%{adapter} to '%{bridge}'
+          enabling: |-
+            Enabling bridged network...
+          preparing: |-
+            Preparing bridged networking...
+          specific_not_found: |-
+            Specific bridge '%{bridge}' not found. You may be asked to specify
+            which network to bridge to.
+        check_box:
+          not_found: Box %{name} was not found. Fetching box from specified URL...
+          not_specified: |-
+            No base box was specified! A base box is required as a staring point
+            for every vagrant virtual machine. Please specify one in your Vagrantfile
+            using `config.vm.box`
+          does_not_exist: |-
+            Specified box `%{name}` does not exist!
+
+            The box must be added through the `vagrant box add` command. Please view
+            the documentation associated with the command for more information.
+        check_guest_additions:
+          not_detected: |-
+            No guest additions were detected on the base box for this VM! Guest
+            additions are required for forwarded ports, shared folders, host only
+            networking, and more. If SSH fails on this machine, please install
+            the guest additions and repackage the box to continue.
+
+            This is not an error message; everything may continue to work properly,
+            in which case you may ignore this message.
+          version_mismatch: |-
+            The guest additions on this VM do not match the install version of
+            VirtualBox! This may cause things such as forwarded ports, shared
+            folders, and more to not work properly. If any of those things fail on
+            this machine, please update the guest additions and repackage the
+            box.
+
+            Guest Additions Version: %{guest_version}
+            VirtualBox Version: %{virtualbox_version}
+        clear_forward_ports:
+          deleting: Clearing any previously set forwarded ports...
+        clear_network_interfaces:
+          deleting: Clearing any previously set network interfaces...
+        clear_shared_folders:
+          deleting: Cleaning previously set shared folders...
+        customize:
+          failure: |-
+            A customization command failed:
+
+            %{command}
+
+            The following error was experienced:
+
+            %{error}
+
+            Please fix this customization and try again.
+          running: Running any VM customizations...
+        destroy:
+          destroying: Destroying VM and associated drives...
+        destroy_network:
+          destroying: Destroying unused networking interface...
+        disable_networks:
+          disabling: Disabling host only networks...
+        discard_state:
+          discarding: Discarding saved state of VM...
+        export:
+          create_dir: Creating temporary directory for export...
+          exporting: Exporting VM...
+          power_off: "The Vagrant virtual environment you are trying to package must be powered off."
+        forward_ports:
+          auto_empty: |-
+            Vagrant found a port collision for the specified port and virtual machine.
+            While this port was marked to be auto-corrected, the ports in the
+            auto-correction range are all also used.
+
+            VM: %{vm_name}
+            Forwarded port: %{guest_port} => %{host_port}
+          collision_error: |-
+            Vagrant cannot forward the specified ports on this VM, since they
+            would collide with another VirtualBox virtual machine's forwarded
+            ports! The forwarded port to %{host_port} is already in use on the host
+            machine.
+
+            To fix this, modify your current projects Vagrantfile to use another
+            port. Example, where '1234' would be replaced by a unique host port:
+
+              config.vm.forward_port %{guest_port}, 1234
+
+          fixed_collision: |-
+            Fixed port collision for %{guest_port} => %{host_port}. Now on port %{new_port}.
+          forwarding: Forwarding ports...
+          forwarding_entry: |-
+            -- %{guest_port} => %{host_port} (adapter %{adapter})
+          non_nat: |-
+            VirtualBox adapter #%{adapter} not configured as "NAT". Skipping port
+            forwards on this adapter.
+          privileged_ports: |-
+            You are trying to forward to privileged ports (ports <= 1024). Most
+            operating systems restrict this to only privileged process (typically
+            processes running as an administrative user). This is a warning in case
+            the port forwarding doesn't work. If any problems occur, please try a
+            port higher than 1024.
+        halt:
+          force: |-
+            Forcing shutdown of VM...
+          graceful: |-
+            Attempting graceful shutdown of VM...
+        host_name:
+          setting: "Setting host name..."
+        import:
+          importing: Importing base box '%{name}'...
+          failure: |-
+            The VM import failed! Try running `VBoxManage import` on the box file
+            manually for more verbose error output.
+        match_mac:
+          matching: Matching MAC address for NAT networking...
+          no_base_mac: |-
+            No base MAC address was specified. This is required for the NAT networking
+            to work properly (and hence port forwarding, SSH, etc.). Specifying this
+            MAC address is typically up to the box and box maintiner. Please contact
+            the relevant person to solve this issue.
+        network:
+          adapter_collision: |-
+            More than one network have been assigned to the same adapter. Please
+            make sure your networks you've configured in your Vagrantfile do not
+            overlap.
+          configuring: |-
+            Configuring and enabling network interfaces...
+          dhcp_already_attached: |-
+            A host only network interface you're attempting to configure via DHCP
+            already has a conflicting host only adapter with DHCP enabled. The
+            DHCP on this adapter is incompatible with the DHCP settings. Two
+            host only network interfaces are not allowed to overlap, and each
+            host only network interface can have only one DHCP server. Please
+            reconfigure your host only network or remove the virtual machine
+            using the other host only network.
+          no_adapters: |-
+            No available adapters on the virtual machine were found to accomodate
+            for all configured networks. VirtualBox virtual machines have 8
+            network interfaces available usually, so please lower the number of
+            networks to below 8.
+          preparing: |-
+            Preparing network interfaces based on configuration...
+        host_only_network:
+          collides: |-
+            The specified host network collides with a non-hostonly network!
+            This will cause your specified IP to be inaccessible. Please change
+            the IP or name of your host only network to not match that of
+            a bridged or non-hostonly network.
+          creating: "Creating new host only network for environment..."
+          enabling: "Enabling host only network..."
+          not_found: |-
+            The specified host network could not be found: '%{name}.'
+            If the name specification is removed, Vagrant will create a new
+            host only network for you. Alternatively, please create the
+            specified network manually.
+          preparing: "Preparing host only network..."
+        nfs:
+          host_required: |-
+            A host class is required for NFS shared folders. By default, these
+            are auto-detected, but can be overridden with `config.vagrant.host`.
+            There is currently no host class loaded.
+          no_host_network: |-
+            NFS shared folders requires that host only networking is enabled
+            with a static IP. Please enable host only network and assign a
+            static IP via `config.vm.network`.
+          not_supported: |-
+            The host class is reporting that NFS is not supported by this host,
+            or `nfsd` may not be installed. Please verify that `nfsd` is installed
+            on your machine, and retry.
+          exporting: Exporting NFS shared folders...
+          mounting: Mounting NFS shared folders...
+        persist:
+          dotfile_error: |-
+            The dotfile which Vagrant uses to store the UUID of the project's
+            virtual machine already exists and is not a file! The dotfile is
+            currently configured to be '%{dotfile_path}'
+
+            To change this value, please see `config.vagrant.dotfile_name`
+
+            Are you trying to use Vagrant from your home directory? This is the
+            leading cause of this error message. To resolve this, simply use a
+            different directory. Or, if you really want to run Vagrant from your
+            home directory, modify the `config.vagrant.dotfile_name` configuration
+            key.
+          persisting: "Persisting the VM UUID (%{uuid})..."
+        provision:
+          beginning: "Running provisioner: %{provisioner}..."
+        resume:
+          resuming: Resuming suspended VM...
+        share_folders:
+          creating: Creating shared folders metadata...
+          mounting: Mounting shared folders...
+          mounting_entry: "-- %{name}: %{guest_path}"
+          nomount_entry: "-- %{name}: Automounting disabled."
+        suspend:
+          suspending: Saving VM state and suspending execution...
+
+      box:
+        destroy:
+          destroying: "Deleting box '%{name}'..."
+        download:
+          with: "Downloading with %{class}..."
+          cleaning: "Cleaning up downloaded box..."
+          unknown_type: "Unknown or unsupported URI type given for box download."
+        unpackage:
+          extracting: "Extracting box..."
+          already_exists: |-
+            A box already exists under the name of '%{name}'. This may or may
+            not be the same box you are trying to add. Please use another name
+            or remove the previous box then try to add it again.
+          untar_failure: |-
+            Failed to untar the box file. This is usually because you're
+            attempting to add a box that isn't a valid box file. Please
+            double check that the box file is properly packaged.
+        verify:
+          verifying: "Verifying box..."
+          failed: |-
+            The box file you're attempting to add is invalid. This can be
+            commonly attributed to typos in the path given to the box add
+            command. Another common case of this is invalid packaging of the
+            box itself.
+
+      general:
+        package:
+          packaging: "Packaging additional file: %{file}"
+          compressing: "Compressing package to: %{tar_path}"
+          output_exists: |-
+            The specified file to save the package as already exists. Please
+            remove this file or specify a different file name for outputting.
+          output_is_directory: |-
+            The specified output is a directory. Please specify a path including
+            a filename.
+          requires_directory: |-
+            A directory was not specified to package. This should never happen
+            and is a result of an internal inconsistency.
+          include_file_missing: |-
+            Package include file doesn't exist: %{file}
+
+    downloaders:
+      file:
+        download: "Copying box to temporary location..."
+        file_missing: "The specified path to a file doesn't exist."
+      http:
+        download: "Downloading box: %{url}"
+        socket_error: |-
+          An error occurred while trying to download the specified box. This most
+          often happens if there is no internet connection or the address is
+          invalid.
+        status_error: |-
+          Bad status code: %{status}
+
+          Please verify that the box exists and is accessible. Also verify that
+          this computer is properly connected to the internet.
+
+    hosts:
+      bsd:
+        nfs_export: |-
+          Preparing to edit /etc/exports. Administrator privileges will be required...
+        nfs_prune: |-
+          Pruning invalid NFS exports. Administrator privileges will be required...
+      linux:
+        nfs_export: |-
+          Preparing to edit /etc/exports. Administrator privileges will be required...
+        nfs_prune: |-
+          Pruning invalid NFS exports. Administrator privileges will be required...
+      arch:
+        nfs_export:
+          prepare: "Preparing to edit /etc/exports. Administrator privileges will be required..."
+      freebsd:
+        nfs_whitespace: |-
+          FreeBSD hosts do not support sharing directories with whitespace in
+          their path. Please adjust your path accordingly.
+
+    provisioners:
+      chef:
+        chef_not_detected: |-
+          The chef binary (either `chef-solo` or `chef-client`) was not found on
+          the VM and is required for chef provisioning. Please verify that chef
+          is installed and that the binary is available on the PATH.
+        json: "Generating chef JSON and uploading..."
+        client_key_folder: "Creating folder to hold client key..."
+        upload_validation_key: "Uploading chef client validation key..."
+        upload_encrypted_data_bag_secret_key: "Uploading chef encrypted data bag secret key..."
+        running_client: "Running chef-client..."
+        running_client_again: "Running chef-client again (failed to converge)..."
+        running_solo: "Running chef-solo..."
+        running_solo_again: "Running chef-solo again (failed to converge)..."
+        invalid_provisioner: |-
+          Vagrant::Provisioners::Chef is not a valid provisioner! Use
+          ChefSolo or ChefClient instead.
+        missing_shared_folders: |-
+          Shared folders that Chef requires are missing on the virtual machine.
+          This is usually due to configuration changing after already booting the
+          machine. The fix is to run a `vagrant reload` so that the proper shared
+          folders will prepared and mounted on the VM.
+        no_convergence: |-
+          Chef never successfully completed! Any errors should be visible in the
+          output above. Please fix your recipes so that they properly complete.
+        not_detected: |-
+          The `%{binary}` binary appears to not be in the PATH of the guest. This
+          could be because the PATH is not properly setup or perhaps chef is not
+          installed on this guest. Chef provisioning can not continue without
+          chef properly installed.
+        server_url_required: |-
+          Chef server provisioning requires that the `config.chef.chef_server_url` be set to the
+          URL of your chef server. Examples include "http://12.12.12.12:4000" and
+          "http://myserver.com:4000" (the port of course can be different, but 4000 is the default)
+        server_validation_key_required: |-
+          Chef server provisioning requires that the `config.chef.validation_key_path` configuration
+          be set to a path on your local machine of the validation key used to register the
+          VM with the chef server.
+        server_validation_key_doesnt_exist: |-
+          The validation key set for `config.chef.validation_key_path` does not exist! This
+          file needs to exist so it can be uploaded to the virtual machine.
+
+      puppet:
+        not_detected: |-
+          The `%{binary}` binary appears to not be in the PATH of the guest. This
+          could be because the PATH is not properly setup or perhaps Puppet is not
+          installed on this guest. Puppet provisioning can not continue without
+          Puppet properly installed.
+        running_puppet: "Running Puppet with %{manifest}..."
+        manifest_missing: |-
+          The configured Puppet manifest is missing. Please specify a path to an
+          existing manifest:
+
+          %{manifest}
+        manifests_path_missing: "The manifests path specified for Puppet does not exist: %{path}"
+        missing_shared_folders: |-
+          Shared folders that Puppet requires are missing on the virtual machine.
+          This is usually due to configuration changing after already booting the
+          machine. The fix is to run a `vagrant reload` so that the proper shared
+          folders will prepared and mounted on the VM.
+        module_path_missing: "The configured module path doesn't exist: %{path}"
+
+      puppet_server:
+        not_detected: |-
+          The `%{binary}` binary appears to not be in the PATH of the guest. This
+          could be because the PATH is not properly setup or perhaps Puppet is not
+          installed on this guest. Puppet provisioning can not continue without
+          Puppet properly installed.
+        running_puppetd: "Running Puppet agent..."
+
+      shell:
+        args_not_string: "Shell provisioner `args` must be a string."
+        path_and_inline_set: "Only one of `path` or `inline` may be set."
+        no_path_or_inline: "One of `path` or `inline` must be set."
+        path_invalid: "`path` for shell provisioner does not exist on the host system: %{path}"
+        upload_path_not_set: "`upload_path` must be set for the shell provisioner."
+
+    guest:
+      base:
+        unsupported_configure_networks: |-
+          Networking features require support that is dependent on the operating
+          system running within the guest virtual machine. Vagrant has built-in support
+          for many operating systems: Debian, Ubuntu, Gentoo, and RedHat. The distro
+          of your VM couldn't be detected or doesn't support networking features.
+
+          Most of the time this is simply due to the fact that no one has contributed
+          back the logic necessary to set this up. Please report a bug as well as the
+          box you're using.
+        unsupported_host_name: |-
+          Setting host name is currently only supported on Debian, Ubuntu and RedHat.
+          If you'd like your guest OS to be supported, please open a ticket on the
+          project.
+        unsupported_nfs: |-
+          Vagrant doesn't support mounting NFS shared folders for your specific
+          guest operating system yet, or possibly couldn't properly detect the
+          operating system on the VM.
+
+          Most of the time this is simply due to the fact that no one has contributed
+          back the logic necessary to set this up. Please report a bug as well as the
+          box you're using.
+        unsupported_halt: |-
+          Vagrant doesn't support graceful shutdowns for your specific
+          guest operating system yet, or possibly couldn't properly detect the
+          operating system on the VM.
+
+          Most of the time this is simply due to the fact that no one has contributed
+          back the logic necessary to set this up. Please report a bug as well as the
+          box you're using.
+        unsupported_shared_folder: |-
+          Vagrant doesn't support mounting shared folders for your specific
+          guest operating system yet, or possibly couldn't properly detect the
+          operating system on the VM.
+
+          Most of the time this is simply due to the fact that no one has contributed
+          back the logic necessary to set this up. Please report a bug as well as the
+          box you're using.
+      linux:
+        guestpath_expand_fail: |-
+          Vagrant failed to determine the shell expansion of the guest path
+          for one of your shared folders. This is an extremely rare error case
+          and most likely indicates an unusual configuration of the guest system.
+          Please report a bug with your Vagrantfile.
+        mount_fail: "Failed to mount shared folders. `vboxsf` was not available."
+        mount_nfs_fail: |-
+          Mounting NFS shared folders failed. This is most often caused by the NFS
+          client software not being installed on the guest machine. Please verify
+          that the NFS client software is properly installed, and consult any resources
+          specific to the linux distro you're using for more information on how to
+          do this.