form_translation 0.0.1

data/test/dummy/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the Rails application.
+require File.expand_path('../application', __FILE__)
+
+# Initialize the Rails application.
+Dummy::Application.initialize!

data/test/dummy/config/environments/development.rb

@@ -0,0 +1,31 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  config.action_controller.action_on_unpermitted_parameters = :raise
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations
+  config.active_record.migration_error = :page_load
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+end

data/test/dummy/config/environments/production.rb

@@ -0,0 +1,80 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both thread web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Enable Rack::Cache to put a simple HTTP cache in front of your application
+  # Add `rack-cache` to your Gemfile before enabling this.
+  # For large-scale production use, consider using a caching reverse proxy like nginx, varnish or squid.
+  # config.action_dispatch.rack_cache = true
+
+  # Disable Rails's static asset server (Apache or nginx will already do this).
+  config.serve_static_assets = false
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # Generate digests for assets URLs.
+  config.assets.digest = true
+
+  # Version of your assets, change this if you want to expire all your assets.
+  config.assets.version = '1.0'
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for nginx
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Set to :debug to see everything in the log.
+  config.log_level = :info
+
+  # Prepend all log lines with the following tags.
+  # config.log_tags = [ :subdomain, :uuid ]
+
+  # Use a different logger for distributed setups.
+  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = "http://assets.example.com"
+
+  # Precompile additional assets.
+  # application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
+  # config.assets.precompile += %w( search.js )
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation can not be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Disable automatic flushing of the log to improve performance.
+  # config.autoflush_log = false
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+end

data/test/dummy/config/environments/test.rb

@@ -0,0 +1,36 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure static asset server for tests with Cache-Control for performance.
+  config.serve_static_assets  = true
+  config.static_cache_control = "public, max-age=3600"
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+end

data/test/dummy/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/test/dummy/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

data/test/dummy/config/initializers/form_translation.rb

@@ -0,0 +1,5 @@
+FormTranslation.config do |ft|
+  ft.default_language = :en
+  ft.foreign_languages = [:de]
+  ft.translation_column = :translation
+end

data/test/dummy/config/initializers/inflections.rb

@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym 'RESTful'
+# end

data/test/dummy/config/initializers/mime_types.rb

@@ -0,0 +1,5 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf
+# Mime::Type.register_alias "text/html", :iphone

data/test/dummy/config/initializers/secret_token.rb

@@ -0,0 +1,12 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key is used for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+# You can use `rake secret` to generate a secure secret key.
+
+# Make sure your secret_key_base is kept private
+# if you're sharing your code publicly.
+Dummy::Application.config.secret_key_base = 'd03f9f428df39cb00284be61b7fb27841f7d4d9583ca00acf0bc3188c9edfeb720f5f202059ee1cfb9b06c917b8a25c2e4468938645607fe4fc91a51342e31b7'

data/test/dummy/config/initializers/session_store.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Dummy::Application.config.session_store :cookie_store, key: '_dummy_session'

data/test/dummy/config/initializers/simple_form.rb

@@ -0,0 +1,161 @@
+# Use this setup block to configure all options available in SimpleForm.
+SimpleForm.setup do |config|
+  # Wrappers are used by the form builder to generate a
+  # complete input. You can remove any component from the
+  # wrapper, change the order or even add your own to the
+  # stack. The options given below are used to wrap the
+  # whole input.
+  config.wrappers :default, class: :input,
+    hint_class: :field_with_hint, error_class: :field_with_errors do |b|
+    ## Extensions enabled by default
+    # Any of these extensions can be disabled for a
+    # given input by passing: `f.input EXTENSION_NAME => false`.
+    # You can make any of these extensions optional by
+    # renaming `b.use` to `b.optional`.
+
+    # Determines whether to use HTML5 (:email, :url, ...)
+    # and required attributes
+    b.use :html5
+
+    # Calculates placeholders automatically from I18n
+    # You can also pass a string as f.input placeholder: "Placeholder"
+    b.use :placeholder
+
+    ## Optional extensions
+    # They are disabled unless you pass `f.input EXTENSION_NAME => :lookup`
+    # to the input. If so, they will retrieve the values from the model
+    # if any exists. If you want to enable the lookup for any of those
+    # extensions by default, you can change `b.optional` to `b.use`.
+
+    # Calculates maxlength from length validations for string inputs
+    b.optional :maxlength
+
+    # Calculates pattern from format validations for string inputs
+    b.optional :pattern
+
+    # Calculates min and max from length validations for numeric inputs
+    b.optional :min_max
+
+    # Calculates readonly automatically from readonly attributes
+    b.optional :readonly
+
+    ## Inputs
+    b.use :label_input
+    b.use :hint,  wrap_with: { tag: :span, class: :hint }
+    b.use :error, wrap_with: { tag: :span, class: :error }
+
+    ## full_messages_for
+    # If you want to display the full error message for the attribute, you can
+    # use the component :full_error, like:
+    #
+    # b.use :full_error, wrap_with: { tag: :span, class: :error }
+  end
+
+  # The default wrapper to be used by the FormBuilder.
+  config.default_wrapper = :default
+
+  # Define the way to render check boxes / radio buttons with labels.
+  # Defaults to :nested for bootstrap config.
+  #   inline: input + label
+  #   nested: label > input
+  config.boolean_style = :nested
+
+  # Default class for buttons
+  config.button_class = 'btn'
+
+  # Method used to tidy up errors. Specify any Rails Array method.
+  # :first lists the first message for each field.
+  # Use :to_sentence to list all errors for each field.
+  # config.error_method = :first
+
+  # Default tag used for error notification helper.
+  config.error_notification_tag = :div
+
+  # CSS class to add for error notification helper.
+  config.error_notification_class = 'error_notification'
+
+  # ID to add for error notification helper.
+  # config.error_notification_id = nil
+
+  # Series of attempts to detect a default label method for collection.
+  # config.collection_label_methods = [ :to_label, :name, :title, :to_s ]
+
+  # Series of attempts to detect a default value method for collection.
+  # config.collection_value_methods = [ :id, :to_s ]
+
+  # You can wrap a collection of radio/check boxes in a pre-defined tag, defaulting to none.
+  # config.collection_wrapper_tag = nil
+
+  # You can define the class to use on all collection wrappers. Defaulting to none.
+  # config.collection_wrapper_class = nil
+
+  # You can wrap each item in a collection of radio/check boxes with a tag,
+  # defaulting to :span. Please note that when using :boolean_style = :nested,
+  # SimpleForm will force this option to be a label.
+  # config.item_wrapper_tag = :span
+
+  # You can define a class to use in all item wrappers. Defaulting to none.
+  # config.item_wrapper_class = nil
+
+  # How the label text should be generated altogether with the required text.
+  # config.label_text = lambda { |label, required, explicit_label| "#{required} #{label}" }
+
+  # You can define the class to use on all labels. Default is nil.
+  # config.label_class = nil
+
+  # You can define the class to use on all forms. Default is simple_form.
+  # config.form_class = :simple_form
+
+  # You can define which elements should obtain additional classes
+  # config.generate_additional_classes_for = [:wrapper, :label, :input]
+
+  # Whether attributes are required by default (or not). Default is true.
+  # config.required_by_default = true
+
+  # Tell browsers whether to use the native HTML5 validations (novalidate form option).
+  # These validations are enabled in SimpleForm's internal config but disabled by default
+  # in this configuration, which is recommended due to some quirks from different browsers.
+  # To stop SimpleForm from generating the novalidate option, enabling the HTML5 validations,
+  # change this configuration to true.
+  config.browser_validations = false
+
+  # Collection of methods to detect if a file type was given.
+  # config.file_methods = [ :mounted_as, :file?, :public_filename ]
+
+  # Custom mappings for input types. This should be a hash containing a regexp
+  # to match as key, and the input type that will be used when the field name
+  # matches the regexp as value.
+  # config.input_mappings = { /count/ => :integer }
+
+  # Custom wrappers for input types. This should be a hash containing an input
+  # type as key and the wrapper that will be used for all inputs with specified type.
+  # config.wrapper_mappings = { string: :prepend }
+
+  # Default priority for time_zone inputs.
+  # config.time_zone_priority = nil
+
+  # Default priority for country inputs.
+  # config.country_priority = nil
+
+  # When false, do not use translations for labels.
+  # config.translate_labels = true
+
+  # Automatically discover new inputs in Rails' autoload path.
+  # config.inputs_discovery = true
+
+  # Cache SimpleForm inputs discovery
+  # config.cache_discovery = !Rails.env.development?
+
+  # Default class for inputs
+  # config.input_class = nil
+
+  # Define the default class of the input wrapper of the boolean input.
+  config.boolean_label_class = 'checkbox'
+
+  # Defines if the default input wrapper class should be included in radio
+  # collection wrappers.
+  # config.include_default_input_wrapper_class = true
+
+  # Defines which i18n scope will be used in Simple Form.
+  # config.i18n_scope = 'simple_form'
+end

data/test/dummy/config/initializers/wrap_parameters.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
+end
+
+# To enable root element in JSON for ActiveRecord objects.
+# ActiveSupport.on_load(:active_record) do
+#  self.include_root_in_json = true
+# end

data/test/dummy/config/locales/en.yml

@@ -0,0 +1,23 @@
+# Files in the config/locales directory are used for internationalization
+# and are automatically loaded by Rails. If you want to use locales other
+# than English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t 'hello'
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t('hello') %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# To learn more, please read the Rails Internationalization guide
+# available at http://guides.rubyonrails.org/i18n.html.
+
+en:
+  hello: "Hello world"

data/test/dummy/config/locales/simple_form.en.yml

@@ -0,0 +1,31 @@
+en:
+  simple_form:
+    "yes": 'Yes'
+    "no": 'No'
+    required:
+      text: 'required'
+      mark: '*'
+      # You can uncomment the line below if you need to overwrite the whole required html.
+      # When using html, text and mark won't be used.
+      # html: '<abbr title="required">*</abbr>'
+    error_notification:
+      default_message: "Please review the problems below:"
+    # Examples
+    # labels:
+    #   defaults:
+    #     password: 'Password'
+    #   user:
+    #     new:
+    #       email: 'E-mail to sign in.'
+    #     edit:
+    #       email: 'E-mail.'
+    # hints:
+    #   defaults:
+    #     username: 'User name to sign in.'
+    #     password: 'No special characters, please.'
+    # include_blanks:
+    #   defaults:
+    #     age: 'Rather not say'
+    # prompts:
+    #   defaults:
+    #     age: 'Select your age'