foreman_remote_execution 11.0.0 → 11.1.1

data/locale/fr/foreman_remote_execution.po

@@ -131,6 +131,9 @@ msgstr "À"
 msgid "At minute"
 msgstr "À la minute"
 
+msgid "Back"
+msgstr ""
+
 msgid "Back to Job"
 msgstr "Retour aux job"
 
@@ -140,6 +143,9 @@ msgstr "Signet"
 msgid "Can't find Job Invocation for an id %s"
 msgstr "Impossible de trouver l’invocation de job ayant pour id %s"
 
+msgid "Cancel"
+msgstr ""
+
 msgid "Cancel Job"
 msgstr "Annuler la tâche"
 
@@ -164,6 +170,9 @@ msgstr "La liste de catégories a échoué avec :"
 msgid "Category and template"
 msgstr ""
 
+msgid "Check for long running tasks"
+msgstr ""
+
 msgid "Choose a job template that is pre-selected in job invocation form"
 msgstr "Choisissez un modèle qui soit présélectionné dans le formulaire de requête du job"
 
@@ -242,8 +251,11 @@ msgstr "Aucun rapport pour ce job"
 msgid "Cron line"
 msgstr "Ligne Cron"
 
-msgid "Cron line format 'a b c d e', where:"
-msgstr "Format de ligne cron 'a b c d' avec :"
+msgid "Cron line (extended)"
+msgstr ""
+
+msgid "Cron line format '1 2 3 4 5', where:"
+msgstr ""
 
 msgid "Cronline"
 msgstr "Cronline"
@@ -293,6 +305,9 @@ msgstr "Supprimer un jeu de données en entrée externe"
 msgid "Delete a job template"
 msgstr "Supprimer un modèle de job"
 
+msgid "Deliver notifications about long running tasks"
+msgstr ""
+
 msgid "Description"
 msgstr "Description"
 
@@ -308,12 +323,6 @@ msgstr "Désignation d’un objectif spécial"
 msgid "Display advanced fields"
 msgstr "Afficher les champs avancés"
 
-msgid "Distribute execution over N seconds. If this is set and proxy batch triggering is enabled, then tasks are triggered on the smart proxy in batches of size 1."
-msgstr "Répartir l'exécution sur N secondes. Si ce paramètre est défini et que le déclenchement par lot du proxy est activé, les tâches sont alors déclenchées sur le proxy intelligent par lots de taille 1."
-
-msgid "Distribute tasks over N seconds"
-msgstr "Distribue les tâches sur N secondes"
-
 msgid "Does not repeat"
 msgstr "Pas de répétition"
 
@@ -440,6 +449,12 @@ msgstr "Repli sur n'importe quel proxy"
 msgid "Feature input %{input_name} not defined in template %{template_name}"
 msgstr "Entrée de la caractéristique %{input_name}non définie dans le modèle %{template_name}"
 
+msgid "Fill all required fields in all the steps"
+msgstr ""
+
+msgid "Fill all required fields in all the steps to start the job"
+msgstr ""
+
 msgid "Filter by host collections"
 msgstr "Filtrer les collections d'hôtes"
 
@@ -563,6 +578,9 @@ msgstr "Le sélecteur de proxy interne ne peut être utilisé que si Katello est
 msgid "Interval in seconds, if the job is not picked up by a client within this interval it will be cancelled."
 msgstr ""
 
+msgid "Interval in seconds, if the job is not picked up by a client within this interval it will be cancelled. Applies only to pull-mqtt based jobs"
+msgstr ""
+
 msgid "Invalid date"
 msgstr "Chemin invalide"
 
@@ -662,6 +680,9 @@ msgstr "Derniers jobs"
 msgid "Learn more about this in the documentation."
 msgstr "Approfondissez ce sujet dans la documentation."
 
+msgid "List available remote execution features for a host"
+msgstr ""
+
 msgid "List foreign input sets"
 msgstr "Afficher les jeux de données en entrée externes"
 
@@ -713,6 +734,9 @@ msgstr "Jamais"
 msgid "New Job Template"
 msgstr "Nouveau modèle de job"
 
+msgid "Next"
+msgstr ""
+
 msgid "No (override)"
 msgstr "Non (remplacement)"
 
@@ -959,6 +983,9 @@ msgstr "Effectuer au maximum N tâches à la fois. Si ce paramètre est défini
 msgid "Run job"
 msgstr "Lancer le job"
 
+msgid "Run on selected hosts"
+msgstr ""
+
 msgid "Running"
 msgstr "Exécution en cours"
 
@@ -1058,9 +1085,6 @@ msgstr ""
 msgid "Set password for effective user (using sudo-like mechanisms)"
 msgstr "Définir le mot de passe pour l'utilisateur effectif (en utilisant des mécanismes similaires à ceux de Sudo)"
 
-msgid "Set to distribute over"
-msgstr "Défini pour distribuer sur"
-
 msgid "Setup remote execution pull mode. If set to `Yes`, pull provider client will be deployed on the registered host. The inherited value is based on the `host_registration_remote_execution_pull` parameter. It can be inherited e.g. from host group, operating system, organization. When overridden, the selected value will be stored on host parameter level."
 msgstr ""
 
@@ -1088,12 +1112,21 @@ msgstr "Voir les détails d'un modèle de job"
 msgid "Show remote execution feature"
 msgstr "Affiche la capacité d'exécution distante"
 
+msgid "Skip to review"
+msgstr ""
+
+msgid "Skip to review step"
+msgstr ""
+
 msgid "Snippet"
 msgstr "Snippet"
 
 msgid "Start"
 msgstr "Démarrer"
 
+msgid "Start job"
+msgstr ""
+
 msgid "Started"
 msgstr "Démarré"
 
@@ -1121,6 +1154,9 @@ msgstr "Requête statique"
 msgid "Status"
 msgstr "Statut"
 
+msgid "Submit"
+msgstr ""
+
 msgid "Subscribe to all my jobs"
 msgstr "Souscrire à tous mes jobs"
 
@@ -1178,6 +1214,9 @@ msgstr "Le modèle avec l'ID '%%{id} ' n'a pas été trouvé"
 msgid "Templates list failed with:"
 msgstr "La liste des modèles a échoué avec :"
 
+msgid "The cron line supports extended cron line syntax. For details please refer to the "
+msgstr ""
+
 msgid "The dynamic query '%{query}' was not resolved yet. The list of hosts to which it would resolve now can be seen %{here}."
 msgstr "La requête dynamique '%{query}' n'a pas encore été résolue. La liste des hôtes actuelle avec lesquels ils pourraient être résolus peut être vue ici %{here}."
 
@@ -1232,12 +1271,9 @@ msgstr "Ce modèle est utilisé pour générer la description. <br/>Les valeurs
 msgid "Time in seconds from the start on the remote host after which the job should be killed."
 msgstr "Durée en secondes depuis le démarrage sur l'hôte distant après laquelle le job doit être supprimé."
 
-msgid "Time in seconds within which the host has to pick up a job. If the job is not picked up within this limit, the job will be cancelled. Defaults to 1 day."
+msgid "Time in seconds within which the host has to pick up a job. If the job is not picked up within this limit, the job will be cancelled. Defaults to 1 day. Applies only to pull-mqtt based jobs."
 msgstr ""
 
-msgid "Time span"
-msgstr "Durée"
-
 msgid "Time to pickup"
 msgstr ""
 
@@ -1430,6 +1466,9 @@ msgstr "annulé"
 msgid "default_capsule method missing from SmartProxy"
 msgstr "méthode default_capsule manquante dans SmartProxy"
 
+msgid "documentation"
+msgstr ""
+
 msgid "effective user"
 msgstr "utilisateur effectif"
 

data/locale/ja/foreman_remote_execution.po

@@ -128,6 +128,9 @@ msgstr "場所"
 msgid "At minute"
 msgstr "分"
 
+msgid "Back"
+msgstr ""
+
 msgid "Back to Job"
 msgstr "ジョブに戻る"
 
@@ -137,6 +140,9 @@ msgstr "ブックマーク"
 msgid "Can't find Job Invocation for an id %s"
 msgstr "ID %s のジョブ呼び出しが見つかりません"
 
+msgid "Cancel"
+msgstr ""
+
 msgid "Cancel Job"
 msgstr "ジョブのキャンセル"
 
@@ -161,6 +167,9 @@ msgstr "カテゴリー一覧が以下により失敗:"
 msgid "Category and template"
 msgstr ""
 
+msgid "Check for long running tasks"
+msgstr ""
+
 msgid "Choose a job template that is pre-selected in job invocation form"
 msgstr "ジョブ呼び出しフォームで事前に選択されているジョブテンプレートを選択してください"
 
@@ -239,8 +248,11 @@ msgstr "このジョブのレポートを作成"
 msgid "Cron line"
 msgstr "cron 行"
 
-msgid "Cron line format 'a b c d e', where:"
-msgstr "cron 行の形式は「a b c d e」です。ここで、"
+msgid "Cron line (extended)"
+msgstr ""
+
+msgid "Cron line format '1 2 3 4 5', where:"
+msgstr ""
 
 msgid "Cronline"
 msgstr "cron 行"
@@ -290,6 +302,9 @@ msgstr "外部入力セットを削除"
 msgid "Delete a job template"
 msgstr "ジョブテンプレートの削除"
 
+msgid "Deliver notifications about long running tasks"
+msgstr ""
+
 msgid "Description"
 msgstr "説明"
 
@@ -305,12 +320,6 @@ msgstr "特別な目的の指定"
 msgid "Display advanced fields"
 msgstr "詳細フィールドを表示"
 
-msgid "Distribute execution over N seconds. If this is set and proxy batch triggering is enabled, then tasks are triggered on the smart proxy in batches of size 1."
-msgstr "N 秒間にわたって実行を分散します。この値が設定されていて、プロキシーバッチのトリガーが有効な場合には、タスクはサイズ 1 の単位で一括して、Smart Proxy でトリガーされます。"
-
-msgid "Distribute tasks over N seconds"
-msgstr "N 秒間にわたってタスクを分散"
-
 msgid "Does not repeat"
 msgstr "繰り返さない"
 
@@ -437,6 +446,12 @@ msgstr "プロキシーへのフォールバック"
 msgid "Feature input %{input_name} not defined in template %{template_name}"
 msgstr "テンプレート %{template_name} に機能入力 %{input_name} が定義されていません"
 
+msgid "Fill all required fields in all the steps"
+msgstr ""
+
+msgid "Fill all required fields in all the steps to start the job"
+msgstr ""
+
 msgid "Filter by host collections"
 msgstr "ホストコレクションでフィルター"
 
@@ -560,6 +575,9 @@ msgstr "内部プロキシーセレクターは、Katello が有効になって
 msgid "Interval in seconds, if the job is not picked up by a client within this interval it will be cancelled."
 msgstr ""
 
+msgid "Interval in seconds, if the job is not picked up by a client within this interval it will be cancelled. Applies only to pull-mqtt based jobs"
+msgstr ""
+
 msgid "Invalid date"
 msgstr "無効な日付"
 
@@ -659,6 +677,9 @@ msgstr "最新のジョブ"
 msgid "Learn more about this in the documentation."
 msgstr "詳細についてはドキュメントを参照してください。"
 
+msgid "List available remote execution features for a host"
+msgstr ""
+
 msgid "List foreign input sets"
 msgstr "外部入力セットを一覧表示"
 
@@ -710,6 +731,9 @@ msgstr "なし"
 msgid "New Job Template"
 msgstr "新規ジョブテンプレート"
 
+msgid "Next"
+msgstr ""
+
 msgid "No (override)"
 msgstr "No (上書き)"
 
@@ -956,6 +980,9 @@ msgstr "1 回に最大 N 個のタスクを実行します。この値が設定
 msgid "Run job"
 msgstr "ジョブを実行"
 
+msgid "Run on selected hosts"
+msgstr ""
+
 msgid "Running"
 msgstr "実行中"
 
@@ -1055,9 +1082,6 @@ msgstr ""
 msgid "Set password for effective user (using sudo-like mechanisms)"
 msgstr "実行ユーザーのパスワードを設定 (sudo と同様のメカニズムを使用)"
 
-msgid "Set to distribute over"
-msgstr "分散を設定:"
-
 msgid "Setup remote execution pull mode. If set to `Yes`, pull provider client will be deployed on the registered host. The inherited value is based on the `host_registration_remote_execution_pull` parameter. It can be inherited e.g. from host group, operating system, organization. When overridden, the selected value will be stored on host parameter level."
 msgstr ""
 
@@ -1085,12 +1109,21 @@ msgstr "ジョブテンプレートの詳細を表示"
 msgid "Show remote execution feature"
 msgstr "リモート実行機能の表示"
 
+msgid "Skip to review"
+msgstr ""
+
+msgid "Skip to review step"
+msgstr ""
+
 msgid "Snippet"
 msgstr "スニペット"
 
 msgid "Start"
 msgstr "開始"
 
+msgid "Start job"
+msgstr ""
+
 msgid "Started"
 msgstr "開始済み"
 
@@ -1118,6 +1151,9 @@ msgstr "静的クエリー"
 msgid "Status"
 msgstr "状態"
 
+msgid "Submit"
+msgstr ""
+
 msgid "Subscribe to all my jobs"
 msgstr "すべての自分のジョブにサブスクライブする"
 
@@ -1175,6 +1211,9 @@ msgstr "id '%{id}' のテンプレートが見つかりませんでした"
 msgid "Templates list failed with:"
 msgstr "テンプレート一覧が以下により失敗:"
 
+msgid "The cron line supports extended cron line syntax. For details please refer to the "
+msgstr ""
+
 msgid "The dynamic query '%{query}' was not resolved yet. The list of hosts to which it would resolve now can be seen %{here}."
 msgstr "動的クエリー '%{query}' が解決されませんでした。解決するホストの一覧は %{here} に表示されます。"
 
@@ -1227,12 +1266,9 @@ msgstr "このテンプレートは記述の生成に使用します。<br/>入
 msgid "Time in seconds from the start on the remote host after which the job should be killed."
 msgstr "リモートホストで開始してからジョブを強制終了するまでの時間 (秒単位)"
 
-msgid "Time in seconds within which the host has to pick up a job. If the job is not picked up within this limit, the job will be cancelled. Defaults to 1 day."
+msgid "Time in seconds within which the host has to pick up a job. If the job is not picked up within this limit, the job will be cancelled. Defaults to 1 day. Applies only to pull-mqtt based jobs."
 msgstr ""
 
-msgid "Time span"
-msgstr "タイムスパン"
-
 msgid "Time to pickup"
 msgstr ""
 
@@ -1425,6 +1461,9 @@ msgstr "キャンセル済み"
 msgid "default_capsule method missing from SmartProxy"
 msgstr "SmartProxy に default_capsule メソッドがありません"
 
+msgid "documentation"
+msgstr ""
+
 msgid "effective user"
 msgstr "実効ユーザー"
 

data/locale/ko/foreman_remote_execution.po

@@ -126,6 +126,9 @@ msgstr "시간"
 msgid "At minute"
 msgstr ""
 
+msgid "Back"
+msgstr ""
+
 msgid "Back to Job"
 msgstr "작업으로 돌아가기"
 
@@ -135,6 +138,9 @@ msgstr "북마크 "
 msgid "Can't find Job Invocation for an id %s"
 msgstr ""
 
+msgid "Cancel"
+msgstr ""
+
 msgid "Cancel Job"
 msgstr "작업 취소 "
 
@@ -159,6 +165,9 @@ msgstr ""
 msgid "Category and template"
 msgstr ""
 
+msgid "Check for long running tasks"
+msgstr ""
+
 msgid "Choose a job template that is pre-selected in job invocation form"
 msgstr ""
 
@@ -237,7 +246,10 @@ msgstr ""
 msgid "Cron line"
 msgstr "Cron 줄"
 
-msgid "Cron line format 'a b c d e', where:"
+msgid "Cron line (extended)"
+msgstr ""
+
+msgid "Cron line format '1 2 3 4 5', where:"
 msgstr ""
 
 msgid "Cronline"
@@ -288,6 +300,9 @@ msgstr "외부 입력 세트 삭제"
 msgid "Delete a job template"
 msgstr "작업 템플릿 삭제"
 
+msgid "Deliver notifications about long running tasks"
+msgstr ""
+
 msgid "Description"
 msgstr "설명"
 
@@ -303,12 +318,6 @@ msgstr ""
 msgid "Display advanced fields"
 msgstr "고급 필드 표시"
 
-msgid "Distribute execution over N seconds. If this is set and proxy batch triggering is enabled, then tasks are triggered on the smart proxy in batches of size 1."
-msgstr ""
-
-msgid "Distribute tasks over N seconds"
-msgstr "N초에 걸쳐 태스크 배분"
-
 msgid "Does not repeat"
 msgstr ""
 
@@ -435,6 +444,12 @@ msgstr ""
 msgid "Feature input %{input_name} not defined in template %{template_name}"
 msgstr "%{template_name} 템플릿에 대한 기능 입력 %{input_name}이(가) 정의되지 않았습니다."
 
+msgid "Fill all required fields in all the steps"
+msgstr ""
+
+msgid "Fill all required fields in all the steps to start the job"
+msgstr ""
+
 msgid "Filter by host collections"
 msgstr ""
 
@@ -558,6 +573,9 @@ msgstr ""
 msgid "Interval in seconds, if the job is not picked up by a client within this interval it will be cancelled."
 msgstr ""
 
+msgid "Interval in seconds, if the job is not picked up by a client within this interval it will be cancelled. Applies only to pull-mqtt based jobs"
+msgstr ""
+
 msgid "Invalid date"
 msgstr ""
 
@@ -657,6 +675,9 @@ msgstr ""
 msgid "Learn more about this in the documentation."
 msgstr "설명서에서 자세한 내용을 참조하십시오."
 
+msgid "List available remote execution features for a host"
+msgstr ""
+
 msgid "List foreign input sets"
 msgstr "외부 입력 세트 나열"
 
@@ -708,6 +729,9 @@ msgstr "사용 안 함"
 msgid "New Job Template"
 msgstr "새 작업 템플릿"
 
+msgid "Next"
+msgstr ""
+
 msgid "No (override)"
 msgstr ""
 
@@ -954,6 +978,9 @@ msgstr ""
 msgid "Run job"
 msgstr ""
 
+msgid "Run on selected hosts"
+msgstr ""
+
 msgid "Running"
 msgstr "실행 중 "
 
@@ -1053,9 +1080,6 @@ msgstr ""
 msgid "Set password for effective user (using sudo-like mechanisms)"
 msgstr ""
 
-msgid "Set to distribute over"
-msgstr ""
-
 msgid "Setup remote execution pull mode. If set to `Yes`, pull provider client will be deployed on the registered host. The inherited value is based on the `host_registration_remote_execution_pull` parameter. It can be inherited e.g. from host group, operating system, organization. When overridden, the selected value will be stored on host parameter level."
 msgstr ""
 
@@ -1083,12 +1107,21 @@ msgstr "작업 템플릿 정보 표시"
 msgid "Show remote execution feature"
 msgstr "원격 실행 기능 표시"
 
+msgid "Skip to review"
+msgstr ""
+
+msgid "Skip to review step"
+msgstr ""
+
 msgid "Snippet"
 msgstr "조각 모음 "
 
 msgid "Start"
 msgstr "시작"
 
+msgid "Start job"
+msgstr ""
+
 msgid "Started"
 msgstr ""
 
@@ -1116,6 +1149,9 @@ msgstr ""
 msgid "Status"
 msgstr "상태"
 
+msgid "Submit"
+msgstr ""
+
 msgid "Subscribe to all my jobs"
 msgstr ""
 
@@ -1173,6 +1209,9 @@ msgstr "ID가 '%{id}'인 템플릿을 찾을 수 없습니다."
 msgid "Templates list failed with:"
 msgstr ""
 
+msgid "The cron line supports extended cron line syntax. For details please refer to the "
+msgstr ""
+
 msgid "The dynamic query '%{query}' was not resolved yet. The list of hosts to which it would resolve now can be seen %{here}."
 msgstr "동적 쿼리 '%{query}'이(가) 아직 확인되지 않았습니다. 확인할 대상 호스트의 목록을 %{here}에서 볼 수 있습니다."
 
@@ -1225,12 +1264,9 @@ msgstr ""
 msgid "Time in seconds from the start on the remote host after which the job should be killed."
 msgstr ""
 
-msgid "Time in seconds within which the host has to pick up a job. If the job is not picked up within this limit, the job will be cancelled. Defaults to 1 day."
+msgid "Time in seconds within which the host has to pick up a job. If the job is not picked up within this limit, the job will be cancelled. Defaults to 1 day. Applies only to pull-mqtt based jobs."
 msgstr ""
 
-msgid "Time span"
-msgstr "기간"
-
 msgid "Time to pickup"
 msgstr ""
 
@@ -1423,6 +1459,9 @@ msgstr "취소함"
 msgid "default_capsule method missing from SmartProxy"
 msgstr ""
 
+msgid "documentation"
+msgstr ""
+
 msgid "effective user"
 msgstr ""