flyboy 0.0.1

data/spec/controllers/flyboy/tasks_controller_spec.rb

@@ -0,0 +1,180 @@
+require "spec_helper"
+
+describe Flyboy::TasksController, type: :controller do
+  routes { Flyboy::Engine.routes }
+
+  let!(:task) {
+    FactoryGirl.create(:flyboy_task, done: false)
+  }
+
+  let!(:task2) {
+    FactoryGirl.create(:flyboy_task, goal: task.goal, done: true)
+  }
+
+  let(:valid_attributes) {
+    { title: "New Task" , goal_id: task.goal.id, reminder: Date.today, term: Date.today}
+  }
+
+  describe "#complete" do
+    before(:each) do
+      request.env["HTTP_REFERER"] = "where_i_came_from"
+    end
+
+    it "should mark the task as done" do
+      patch :complete, {id: task.id}
+      task.reload.done.should be true
+    end
+
+    it "should set progress to 100" do
+      patch :complete, {id: task.id}
+      task.reload.progress.should eq(100)
+    end
+
+    it "should add a task_comment" do
+      count = task.comments.count
+      patch :complete, {id: task.id}
+      task.reload.comments.count.should eq(count+1)
+      task.comments.last.progress.should eq(100)
+    end
+
+    it "should redirect to the referer page" do
+      patch :complete, {id: task.id}
+      response.should redirect_to "where_i_came_from"
+    end
+  end
+
+  describe "GET index" do
+    it "assigns all tasks as @tasks" do
+      get :index, {}
+      expect(assigns(:tasks)).to eq Flyboy::Task.all
+    end
+
+    context "when applying filter" do
+      before do
+        Flyboy::Task.destroy_all
+        @task1 = FactoryGirl.create(:flyboy_task, done: true)
+        @task2 = FactoryGirl.create(:flyboy_task, done: false)
+      end
+
+      it 'should display both when not filtered' do
+        get :index
+        assigns(:tasks).should eq [@task1, @task2]
+      end
+
+      it 'should filter by status closed' do
+        Flyboy::SmallData::FilterForTasks.new(request.cookies).store({'status' => "closed"})
+        get :index
+        assigns(:tasks).should eq [@task1]
+      end
+
+      it 'should filter by status opened' do
+        Flyboy::SmallData::FilterForTasks.new(request.cookies).store({'status' => "opened"})
+        get :index
+        assigns(:tasks).should eq [@task2]
+      end
+    end
+  end
+
+  describe "GET show" do
+    it "assigns the requested task as @task" do
+      get :show, {:id => task.to_param}
+      assigns(:task).should eq(task)
+    end
+  end
+
+  describe "GET new" do
+    it "assigns a new task as @task" do
+      get :new, {:goal_id => task.goal.id}
+      assigns(:task).should be_a_new(Flyboy::Task)
+    end
+  end
+
+  describe "GET edit" do
+    it "assigns the requested task as @task" do
+      get :edit, {:id => task.to_param}
+      assigns(:task).should eq(task)
+    end
+  end
+
+  describe "POST create" do
+    describe "with valid params" do
+      it "creates a new Task" do
+        expect {
+          post :create, {:task => valid_attributes}
+        }.to change(Flyboy::Task, :count).by(1)
+      end
+
+      it "assigns a newly created task as @task" do
+        post :create, {:task => valid_attributes}
+        assigns(:task).should be_a(Flyboy::Task)
+        assigns(:task).should be_persisted
+      end
+
+      it "redirects to the created task" do
+        post :create, {:task => valid_attributes}
+        response.should redirect_to Flyboy::Task.order("id ASC").last
+      end
+    end
+
+    describe "with invalid params" do
+      it "assigns a newly created but unsaved task as @task" do
+        post :create, task: {title: nil, goal_id: task.goal.id}
+        assigns(:task).should be_a_new(Flyboy::Task)
+      end
+    end
+
+  end
+
+  describe "PUT update" do
+    describe "with valid params" do
+      it "assigns the requested task as @task" do
+        task = Flyboy::Task.create! valid_attributes
+        patch :update, {:id => task.to_param, :task => valid_attributes}
+        assigns(:task).should eq(task)
+      end
+
+      it "redirects to the task" do
+        task = Flyboy::Task.create! valid_attributes
+        patch :update, {:id => task.to_param, :task => valid_attributes}
+        response.should redirect_to(task)
+      end
+    end
+
+    describe "with invalid params" do
+      it "assigns the task as @task" do
+        task = Flyboy::Task.create! valid_attributes
+
+        patch :update, {
+          :id   => task.to_param,
+          :task => {:title => nil}
+        }
+
+        assigns(:task).should eq(task)
+      end
+    end
+  end
+
+  describe "DELETE destroy" do
+    it "destroys the requested task" do
+      task = Flyboy::Task.create! valid_attributes
+      expect {
+        delete :destroy, {:id => task.to_param}
+      }.to change(Flyboy::Task, :count).by(-1)
+    end
+
+    it "redirects to the tasks list" do
+      task = Flyboy::Task.create! valid_attributes
+      delete :destroy, {:id => task.to_param}
+      response.should redirect_to(tasks_url)
+    end
+  end
+
+  describe "snooze" do
+    it "should redirect to the task list to refresh it" do
+      task = Flyboy::Task.create! valid_attributes
+      patch :snooze, {:id => task.to_param}
+      response.should redirect_to(tasks_url)
+    end
+  end
+
+end

data/spec/dummy/README.rdoc

@@ -0,0 +1,28 @@
+== README
+
+This README would normally document whatever steps are necessary to get the
+application up and running.
+
+Things you may want to cover:
+
+* Ruby version
+
+* System dependencies
+
+* Configuration
+
+* Database creation
+
+* Database initialization
+
+* How to run the test suite
+
+* Services (job queues, cache servers, search engines, etc.)
+
+* Deployment instructions
+
+* ...
+
+
+Please feel free to use a different markup language if you do not plan to run
+<tt>rake doc:app</tt>.

data/spec/dummy/Rakefile

@@ -0,0 +1,6 @@
+# Add your own tasks in files placed in lib/tasks ending in .rake,
+# for example lib/tasks/capistrano.rake, and they will automatically be available to Rake.
+
+require File.expand_path('../config/application', __FILE__)
+
+Rails.application.load_tasks

data/spec/dummy/app/assets/javascripts/application.js

@@ -0,0 +1,2 @@
+//= require jquery
+//= require jquery_ujs

data/spec/dummy/app/assets/stylesheets/application.sass

@@ -0,0 +1,5 @@
+@import dorsale/all
+@import flyboy/application
+
+body
+  margin: 15px 0

data/spec/dummy/app/controllers/application_controller.rb

@@ -0,0 +1,5 @@
+class ApplicationController < ActionController::Base
+  # Prevent CSRF attacks by raising an exception.
+  # For APIs, you may want to use :null_session instead.
+  protect_from_forgery with: :exception
+end

data/spec/dummy/app/helpers/application_helper.rb

@@ -0,0 +1,2 @@
+module ApplicationHelper
+end

data/spec/dummy/app/views/layouts/application.html.erb

@@ -0,0 +1,16 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>Dummy</title>
+  <%= stylesheet_link_tag    'application', media: 'all', 'data-turbolinks-track' => true %>
+  <%= javascript_include_tag 'application', 'data-turbolinks-track' => true %>
+  <%= csrf_meta_tags %>
+</head>
+<body>
+
+<div class="container">
+  <%= yield %>
+</div>
+
+</body>
+</html>

data/spec/dummy/bin/bundle

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../Gemfile', __FILE__)
+load Gem.bin_path('bundler', 'bundle')

data/spec/dummy/bin/rails

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+APP_PATH = File.expand_path('../../config/application', __FILE__)
+require_relative '../config/boot'
+require 'rails/commands'

data/spec/dummy/bin/rake

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+require_relative '../config/boot'
+require 'rake'
+Rake.application.run

data/spec/dummy/bin/setup

@@ -0,0 +1,29 @@
+#!/usr/bin/env ruby
+require 'pathname'
+
+# path to your application root.
+APP_ROOT = Pathname.new File.expand_path('../../',  __FILE__)
+
+Dir.chdir APP_ROOT do
+  # This script is a starting point to setup your application.
+  # Add necessary setup steps to this file:
+
+  puts "== Installing dependencies =="
+  system "gem install bundler --conservative"
+  system "bundle check || bundle install"
+
+  # puts "\n== Copying sample files =="
+  # unless File.exist?("config/database.yml")
+  #   system "cp config/database.yml.sample config/database.yml"
+  # end
+
+  puts "\n== Preparing database =="
+  system "bin/rake db:setup"
+
+  puts "\n== Removing old logs and tempfiles =="
+  system "rm -f log/*"
+  system "rm -rf tmp/cache"
+
+  puts "\n== Restarting application server =="
+  system "touch tmp/restart.txt"
+end

data/spec/dummy/config/application.rb

@@ -0,0 +1,26 @@
+require File.expand_path('../boot', __FILE__)
+
+require 'rails/all'
+
+Bundler.require(*Rails.groups)
+require "flyboy"
+
+module Dummy
+  class Application < Rails::Application
+    # Settings in config/environments/* take precedence over those specified here.
+    # Application configuration should go into files in config/initializers
+    # -- all .rb files in that directory are automatically loaded.
+
+    # Set Time.zone default to the specified zone and make Active Record auto-convert to this zone.
+    # Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC.
+    # config.time_zone = 'Central Time (US & Canada)'
+
+    # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
+    # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s]
+    config.i18n.default_locale = :fr
+
+    # Do not swallow errors in after_commit/after_rollback callbacks.
+    config.active_record.raise_in_transactional_callbacks = true
+  end
+end
+

data/spec/dummy/config/boot.rb

@@ -0,0 +1,5 @@
+# Set up gems listed in the Gemfile.
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../../../Gemfile', __FILE__)
+
+require 'bundler/setup' if File.exist?(ENV['BUNDLE_GEMFILE'])
+$LOAD_PATH.unshift File.expand_path('../../../../lib', __FILE__)

data/spec/dummy/config/database.yml

@@ -0,0 +1,25 @@
+# SQLite version 3.x
+#   gem install sqlite3
+#
+#   Ensure the SQLite 3 gem is defined in your Gemfile
+#   gem 'sqlite3'
+#
+default: &default
+  adapter: sqlite3
+  pool: 5
+  timeout: 5000
+
+development:
+  <<: *default
+  database: db/development.sqlite3
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+test:
+  <<: *default
+  database: db/test.sqlite3
+
+production:
+  <<: *default
+  database: db/production.sqlite3

data/spec/dummy/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the Rails application.
+require File.expand_path('../application', __FILE__)
+
+# Initialize the Rails application.
+Rails.application.initialize!

data/spec/dummy/config/environments/development.rb

@@ -0,0 +1,41 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+
+  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
+  # yet still be able to expire them through the digest params.
+  config.assets.digest = true
+
+  # Adds additional error checking when serving assets at runtime.
+  # Checks for improperly declared sprockets dependencies.
+  # Raises helpful error messages.
+  config.assets.raise_runtime_errors = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/spec/dummy/config/environments/production.rb

@@ -0,0 +1,79 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Enable Rack::Cache to put a simple HTTP cache in front of your application
+  # Add `rack-cache` to your Gemfile before enabling this.
+  # For large-scale production use, consider using a caching reverse proxy like
+  # NGINX, varnish or squid.
+  # config.action_dispatch.rack_cache = true
+
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.serve_static_files = ENV['RAILS_SERVE_STATIC_FILES'].present?
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
+  # yet still be able to expire them through the digest params.
+  config.assets.digest = true
+
+  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Use the lowest log level to ensure availability of diagnostic information
+  # when problems arise.
+  config.log_level = :debug
+
+  # Prepend all log lines with the following tags.
+  # config.log_tags = [ :subdomain, :uuid ]
+
+  # Use a different logger for distributed setups.
+  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = 'http://assets.example.com'
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+end

data/spec/dummy/config/environments/test.rb

@@ -0,0 +1,42 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure static file server for tests with Cache-Control for performance.
+  config.serve_static_files   = true
+  config.static_cache_control = 'public, max-age=3600'
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Randomize the order test cases are executed.
+  config.active_support.test_order = :random
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/spec/dummy/config/initializers/assets.rb

@@ -0,0 +1,11 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Add additional assets to the asset load path
+# Rails.application.config.assets.paths << Emoji.images_path
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
+# Rails.application.config.assets.precompile += %w( search.js )

data/spec/dummy/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/spec/dummy/config/initializers/cookies_serializer.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.action_dispatch.cookies_serializer = :json

data/spec/dummy/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

data/spec/dummy/config/initializers/inflections.rb

@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym 'RESTful'
+# end

data/spec/dummy/config/initializers/mime_types.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf

data/spec/dummy/config/initializers/session_store.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.session_store :cookie_store, key: '_dummy_session'

data/spec/dummy/config/initializers/wrap_parameters.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
+end
+
+# To enable root element in JSON for ActiveRecord objects.
+# ActiveSupport.on_load(:active_record) do
+#  self.include_root_in_json = true
+# end

data/spec/dummy/config/routes.rb

@@ -0,0 +1,4 @@
+Rails.application.routes.draw do
+
+  mount Flyboy::Engine => "/flyboy"
+end

data/spec/dummy/config/secrets.yml

@@ -0,0 +1,22 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key is used for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+# You can use `rake secret` to generate a secure secret key.
+
+# Make sure the secrets in this file are kept private
+# if you're sharing your code publicly.
+
+development:
+  secret_key_base: 1bdf13c1566aaeaa866ffc9b1f6d3173a5add0d52f7e9ebdee9f58e20012e7d75ae7a8904021d8ee8501a15c7406b8d07ee7c509d748e2d46e9b4a0c7bbd60bb
+
+test:
+  secret_key_base: 4e1577f73c4cc473e7565e3fe1f99591163a6f72acd39a366b52d6c64a1f4313cc504152e840843e96c5235da5108675d5f8cd716a559cd1bfcc3cc3c5728c06
+
+# Do not keep production secrets in the repository,
+# instead read values from the environment.
+production:
+  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>

data/spec/dummy/config.ru

@@ -0,0 +1,4 @@
+# This file is used by Rack-based servers to start the application.
+
+require ::File.expand_path('../config/environment', __FILE__)
+run Rails.application