firewatir 1.6.2 → 1.6.5

data/unittests/textfields_xpath_test.rb

@@ -1,113 +1,113 @@
-# feature tests for Text Fields
-# revision: $Revision: 1.0 $
-
-$LOAD_PATH.unshift File.join(File.dirname(__FILE__), '..') unless $SETUP_LOADED
-require 'unittests/setup'
-
-class TC_Fields_XPath < Test::Unit::TestCase
-    
-
-    def setup()
-        goto_page("textfields1.html")
-    end
-
-    def test_text_field_exists
-       assert(browser.text_field(:xpath , "//input[@name='text1']").exists?)   
-       assert_false(browser.text_field(:xpath , "//input[@name='missing']").exists?)   
-
-       assert(browser.text_field(:xpath , "//input[@id='text2']").exists?)   
-       assert_false(browser.text_field(:xpath , "//input[@id='alsomissing']").exists?)   
-
-       #assert(browser.text_field(:xpath , "//input[@beforeText='This Text After']").exists? )
-       #assert(browser.text_field(:xpath , "//input[@afterText='This Text Before']").exists? )
-    end
-
-    # Not supported by Mozilla
-    #def test_text_field_dragContentsTo
-    #    browser.text_field(:xpath , "//input[@name='text1']").dragContentsTo(:xpath , "//input[@id='text2']/")
-    #    assert_equal(browser.text_field(:xpath , "//input[@name='text1']").value, "" ) 
-    #    assert_equal(browser.text_field(:xpath , "//input[@id='text2']").value, "goodbye allHello World" ) 
-    #end
-
-    def test_text_field_VerifyContents
-       assert(browser.text_field(:xpath , "//input[@name='text1']").verify_contains("Hello World") )  
-       assert(browser.text_field(:xpath , "//input[@name='text1']").verify_contains(/Hello\sW/ ) )  
-       assert_false(browser.text_field(:xpath , "//input[@name='text1']").verify_contains("Ruby") )  
-       assert_false(browser.text_field(:xpath , "//input[@name='text1']").verify_contains(/R/) )  
-       assert_raises(UnknownObjectException) {   browser.text_field(:xpath , "//input[@name='NoName']").verify_contains("No field to get a value of") }  
-
-       assert(browser.text_field(:xpath , "//input[@id='text2']").verify_contains("goodbye all") )  
-       assert_raises(UnknownObjectException) {   browser.text_field(:xpath , "//input[@id='noID']").verify_contains("No field to get a value of") }  
-    end
-
-    def test_text_field_enabled
-       assert_false(browser.text_field(:xpath , "//input[@name='disabled']").enabled? )  
-       assert(browser.text_field(:xpath , "//input[@name='text1']").enabled? )  
-       assert(browser.text_field(:xpath , "//input[@id='text2']").enabled? )  
-    end
-
-    def test_text_field_readOnly
-       assert_false(browser.text_field(:xpath , "//input[@name='disabled']").readonly? )  
-       assert(browser.text_field(:xpath , "//input[@name='readOnly']").readonly? )  
-       assert(browser.text_field(:xpath , "//input[@id='readOnly2']").readonly? )  
-    end
-
-    def test_text_field_value()
-         assert_raises(UnknownObjectException  , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@name='missing_field']").append("Some Text") }  
-         assert_equal(  "Hello World" , browser.text_field(:xpath , "//input[@name='text1']").value )  
-    end
-
-    def build_to_s_regex(lhs, rhs)
-        Regexp.new("^#{lhs}: +#{rhs}$")
-    end
-
-    def test_text_field_Append
-         assert_raises(ObjectReadOnlyException  , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@id='readOnly2']").append("Some Text") }  
-         assert_raises(ObjectDisabledException   , "ObjectDisabledException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@name='disabled']").append("Some Text") }  
-         assert_raises(UnknownObjectException  , "UnknownObjectException  was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@name='missing_field']").append("Some Text") }  
-
-         browser.text_field(:xpath , "//input[@name='text1']").append(" Some Text")
-         assert_equal(  "Hello World Some Text" , browser.text_field(:xpath , "//input[@name='text1']").value )  
-    end
-
-
-    def test_text_field_Clear
-         assert_raises(ObjectReadOnlyException  , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@id='readOnly2']").append("Some Text") }  
-         assert_raises(ObjectDisabledException   , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@name='disabled']").append("Some Text") }  
-         assert_raises(UnknownObjectException  , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@name='missing_field']").append("Some Text") }  
-
-         browser.text_field(:xpath , "//input[@name='text1']").clear()
-         assert_equal(  "" , browser.text_field(:xpath , "//input[@name='text1']").value )  
-    end
-
-    def test_text_field_Set
-         assert_raises(ObjectReadOnlyException  , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@id='readOnly2']").append("Some Text") }  
-         assert_raises(ObjectDisabledException   , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@name='disabled']").append("Some Text") }  
-         assert_raises(UnknownObjectException  , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@name='missing_field']").append("Some Text") }  
-
-         browser.text_field(:xpath , "//input[@name='text1']").set("FireWatir Firefox Controller")
-         assert_equal(  "FireWatir Firefox Controller" , browser.text_field(:xpath , "//input[@name='text1']").value )  
-    end
-
-    tag_method :test_JS_Events, :fails_on_ie
-    def test_JS_Events
-        browser.text_field(:xpath , "//input[@name='events_tester']").set('p')
-
-        # the following line has an extra keypress at the begining, as we mimic the delete key being pressed
-        assert_equal( "keypresskeydownkeypresskeyup" , browser.text_field(:xpath , "//textarea[@name='events_text']").value.gsub("\n" , "")  )
-        browser.button(:xpath , "//input[@value = 'Clear Events Box']").click
-        browser.text_field(:xpath , "//input[@name='events_tester']").set('ab')
-
-        # the following line has an extra keypress at the begining, as we mimic the delete key being pressed
-        assert_equal( "keypresskeydownkeypresskeyupkeydownkeypresskeyup" , browser.text_field(:xpath , "//textarea[@name='events_text']").value.gsub("\n" , "") )
-    end
-
-    def test_password
-        browser.text_field(:xpath , "//input[@name='password1']").set("secret")
-        assert( 'secret' , browser.text_field(:xpath , "//input[@name='password1']").value )
-
-        browser.text_field(:xpath , "//input[@id='password1']").set("top_secret")
-        assert( 'top_secret' , browser.text_field(:xpath , "//input[@id='password1']").value )
-    end
-
-end
+# feature tests for Text Fields
+# revision: $Revision: 1.0 $
+
+$LOAD_PATH.unshift File.join(File.dirname(__FILE__), '..') unless $SETUP_LOADED
+require 'unittests/setup'
+
+class TC_Fields_XPath < Test::Unit::TestCase
+    
+
+    def setup()
+        goto_page("textfields1.html")
+    end
+
+    def test_text_field_exists
+       assert(browser.text_field(:xpath , "//input[@name='text1']").exists?)   
+       assert_false(browser.text_field(:xpath , "//input[@name='missing']").exists?)   
+
+       assert(browser.text_field(:xpath , "//input[@id='text2']").exists?)   
+       assert_false(browser.text_field(:xpath , "//input[@id='alsomissing']").exists?)   
+
+       #assert(browser.text_field(:xpath , "//input[@beforeText='This Text After']").exists? )
+       #assert(browser.text_field(:xpath , "//input[@afterText='This Text Before']").exists? )
+    end
+
+    # Not supported by Mozilla
+    #def test_text_field_dragContentsTo
+    #    browser.text_field(:xpath , "//input[@name='text1']").dragContentsTo(:xpath , "//input[@id='text2']/")
+    #    assert_equal(browser.text_field(:xpath , "//input[@name='text1']").value, "" ) 
+    #    assert_equal(browser.text_field(:xpath , "//input[@id='text2']").value, "goodbye allHello World" ) 
+    #end
+
+    def test_text_field_VerifyContents
+       assert(browser.text_field(:xpath , "//input[@name='text1']").verify_contains("Hello World") )  
+       assert(browser.text_field(:xpath , "//input[@name='text1']").verify_contains(/Hello\sW/ ) )  
+       assert_false(browser.text_field(:xpath , "//input[@name='text1']").verify_contains("Ruby") )  
+       assert_false(browser.text_field(:xpath , "//input[@name='text1']").verify_contains(/R/) )  
+       assert_raises(UnknownObjectException) {   browser.text_field(:xpath , "//input[@name='NoName']").verify_contains("No field to get a value of") }  
+
+       assert(browser.text_field(:xpath , "//input[@id='text2']").verify_contains("goodbye all") )  
+       assert_raises(UnknownObjectException) {   browser.text_field(:xpath , "//input[@id='noID']").verify_contains("No field to get a value of") }  
+    end
+
+    def test_text_field_enabled
+       assert_false(browser.text_field(:xpath , "//input[@name='disabled']").enabled? )  
+       assert(browser.text_field(:xpath , "//input[@name='text1']").enabled? )  
+       assert(browser.text_field(:xpath , "//input[@id='text2']").enabled? )  
+    end
+
+    def test_text_field_readOnly
+       assert_false(browser.text_field(:xpath , "//input[@name='disabled']").readonly? )  
+       assert(browser.text_field(:xpath , "//input[@name='readOnly']").readonly? )  
+       assert(browser.text_field(:xpath , "//input[@id='readOnly2']").readonly? )  
+    end
+
+    def test_text_field_value()
+         assert_raises(UnknownObjectException  , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@name='missing_field']").append("Some Text") }  
+         assert_equal(  "Hello World" , browser.text_field(:xpath , "//input[@name='text1']").value )  
+    end
+
+    def build_to_s_regex(lhs, rhs)
+        Regexp.new("^#{lhs}: +#{rhs}$")
+    end
+
+    def test_text_field_Append
+         assert_raises(ObjectReadOnlyException  , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@id='readOnly2']").append("Some Text") }  
+         assert_raises(ObjectDisabledException   , "ObjectDisabledException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@name='disabled']").append("Some Text") }  
+         assert_raises(UnknownObjectException  , "UnknownObjectException  was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@name='missing_field']").append("Some Text") }  
+
+         browser.text_field(:xpath , "//input[@name='text1']").append(" Some Text")
+         assert_equal(  "Hello World Some Text" , browser.text_field(:xpath , "//input[@name='text1']").value )  
+    end
+
+
+    def test_text_field_Clear
+         assert_raises(ObjectReadOnlyException  , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@id='readOnly2']").append("Some Text") }  
+         assert_raises(ObjectDisabledException   , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@name='disabled']").append("Some Text") }  
+         assert_raises(UnknownObjectException  , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@name='missing_field']").append("Some Text") }  
+
+         browser.text_field(:xpath , "//input[@name='text1']").clear()
+         assert_equal(  "" , browser.text_field(:xpath , "//input[@name='text1']").value )  
+    end
+
+    def test_text_field_Set
+         assert_raises(ObjectReadOnlyException  , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@id='readOnly2']").append("Some Text") }  
+         assert_raises(ObjectDisabledException   , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@name='disabled']").append("Some Text") }  
+         assert_raises(UnknownObjectException  , "ObjectReadOnlyException   was supposed to be thrown" ) {   browser.text_field(:xpath , "//input[@name='missing_field']").append("Some Text") }  
+
+         browser.text_field(:xpath , "//input[@name='text1']").set("FireWatir Firefox Controller")
+         assert_equal(  "FireWatir Firefox Controller" , browser.text_field(:xpath , "//input[@name='text1']").value )  
+    end
+
+    tag_method :test_JS_Events, :fails_on_ie
+    def test_JS_Events
+        browser.text_field(:xpath , "//input[@name='events_tester']").set('p')
+
+        # the following line has an extra keypress at the begining, as we mimic the delete key being pressed
+        assert_equal( "keypresskeydownkeypresskeyup" , browser.text_field(:xpath , "//textarea[@name='events_text']").value.gsub("\n" , "")  )
+        browser.button(:xpath , "//input[@value = 'Clear Events Box']").click
+        browser.text_field(:xpath , "//input[@name='events_tester']").set('ab')
+
+        # the following line has an extra keypress at the begining, as we mimic the delete key being pressed
+        assert_equal( "keypresskeydownkeypresskeyupkeydownkeypresskeyup" , browser.text_field(:xpath , "//textarea[@name='events_text']").value.gsub("\n" , "") )
+    end
+
+    def test_password
+        browser.text_field(:xpath , "//input[@name='password1']").set("secret")
+        assert( 'secret' , browser.text_field(:xpath , "//input[@name='password1']").value )
+
+        browser.text_field(:xpath , "//input[@id='password1']").set("top_secret")
+        assert( 'top_secret' , browser.text_field(:xpath , "//input[@id='password1']").value )
+    end
+
+end

metadata

@@ -1,7 +1,7 @@
 --- !ruby/object:Gem::Specification 
 name: firewatir
 version: !ruby/object:Gem::Version 
-  version: 1.6.2
+  version: 1.6.5
 platform: ruby
 authors: 
 - Angrez Singh
@@ -9,7 +9,7 @@ autorequire:
 bindir: bin
 cert_chain: []
 
-date: 2008-11-06 00:00:00 +00:00
+date: 2009-11-10 00:00:00 -07:00
 default_executable: 
 dependencies: 
 - !ruby/object:Gem::Dependency 
@@ -20,7 +20,7 @@ dependencies:
     requirements: 
     - - "="
       - !ruby/object:Gem::Version 
-        version: 1.6.2
+        version: 1.6.5
     version: 
 - !ruby/object:Gem::Dependency 
   name: activesupport
@@ -32,7 +32,7 @@ dependencies:
       - !ruby/object:Gem::Version 
         version: "0"
     version: 
-description: FireWatir stands for "Web Application Testing in Ruby for Firefox". FireWatir (pronounced firewater) is a free,  open-source functional testing tool for automating browser-based tests of web applications.  It works with applications written in any language. FireWatir drives the Firefox browser the same way an end user would.  It clicks links, fills in forms, presses buttons.  FireWatir also checks results, such as whether expected text appears on the page, or whether a control is enabled. FireWatir is a Ruby library that works with Firefox on Windows. It also works on Linux, Mac but without support for JavaScript popups (currently support will be there shortly).
+description: "    FireWatir stands for \"Web Application Testing in Ruby for Firefox\". FireWatir (pronounced firewater) is a free, \n    open-source functional testing tool for automating browser-based tests of web applications. \n    It works with applications written in any language.\n    FireWatir drives the Firefox browser the same way an end user would. \n    It clicks links, fills in forms, presses buttons. \n    FireWatir also checks results, such as whether expected text appears on the page, or whether a control is enabled.\n    FireWatir is a Ruby library that works with Firefox on Windows. It also works on Linux, Mac but without support for\n    JavaScript popups (currently support will be there shortly).\n"
 email: watir-general@googlegroups.com
 executables: []
 
@@ -43,13 +43,33 @@ extra_rdoc_files: []
 files: 
 - lib/firewatir.rb
 - lib/firewatir/container.rb
+- lib/firewatir/document.rb
+- lib/firewatir/element.rb
+- lib/firewatir/element_collections.rb
 - lib/firewatir/exceptions.rb
 - lib/firewatir/firefox.rb
-- lib/firewatir/htmlelements.rb
-- lib/firewatir/MozillaBaseElement.rb
+- lib/firewatir/jssh_socket.rb
 - lib/firewatir/version.rb
 - lib/firewatir/winClicker.rb
 - lib/firewatir/x11.rb
+- lib/firewatir/elements/button.rb
+- lib/firewatir/elements/file_field.rb
+- lib/firewatir/elements/form.rb
+- lib/firewatir/elements/frame.rb
+- lib/firewatir/elements/hidden.rb
+- lib/firewatir/elements/image.rb
+- lib/firewatir/elements/input_element.rb
+- lib/firewatir/elements/link.rb
+- lib/firewatir/elements/non_control_element.rb
+- lib/firewatir/elements/non_control_elements.rb
+- lib/firewatir/elements/not_used.rb
+- lib/firewatir/elements/option.rb
+- lib/firewatir/elements/radio_check_common.rb
+- lib/firewatir/elements/select_list.rb
+- lib/firewatir/elements/table.rb
+- lib/firewatir/elements/table_cell.rb
+- lib/firewatir/elements/table_row.rb
+- lib/firewatir/elements/text_field.rb
 - unittests/attach_to_new_window_test.rb
 - unittests/bug_fixes_test.rb
 - unittests/buttons_xpath_test.rb
@@ -64,8 +84,6 @@ files:
 - unittests/hidden_xpath_test.rb
 - unittests/images_test.rb
 - unittests/images_xpath_test.rb
-- unittests/iostring.rb
-- unittests/iostring_test.rb
 - unittests/javascript_test.rb
 - unittests/links_test.rb
 - unittests/links_xpath_test.rb
@@ -109,6 +127,7 @@ files:
 - unittests/html/modal_dialog_launcher.html
 - unittests/html/nestedFrames.html
 - unittests/html/new_browser.html
+- unittests/html/new_browser_popup.html
 - unittests/html/pass.html
 - unittests/html/popups1.html
 - unittests/html/pre.html
@@ -137,8 +156,11 @@ files:
 - unittests/html/images/plus.gif
 - unittests/html/images/square.jpg
 - unittests/html/images/triangle.jpg
+- LICENSE
 has_rdoc: true
-homepage: http://wtr.rubyforge.org
+homepage: http://www.watir.com
+licenses: []
+
 post_install_message: 
 rdoc_options: 
 - --title
@@ -164,9 +186,9 @@ required_rubygems_version: !ruby/object:Gem::Requirement
 requirements: 
 - Mozilla Firefox browser 1.5 or later.
 rubyforge_project: Watir
-rubygems_version: 1.2.0
+rubygems_version: 1.3.5
 signing_key: 
-specification_version: 2
+specification_version: 3
 summary: Automated testing tool for web applications using Firefox browser.
 test_files: []
 

data/lib/firewatir/MozillaBaseElement.rb

@@ -1,1863 +0,0 @@
-require 'active_support'
-
-=begin
-  license
-  ---------------------------------------------------------------------------
-  Copyright (c) 2006-2007, Angrez Singh
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions are met:
-
-  1. Redistributions of source code must retain the above copyright notice,
-  this list of conditions and the following disclaimer.
-
-  2. Redistributions in binary form must reproduce the above copyright
-  notice, this list of conditions and the following disclaimer in the
-  documentation and/or other materials provided with the distribution.
-
-  3. Neither the names Angrez Singh nor the names of contributors to
-  this software may be used to endorse or promote products derived from this
-  software without specific prior written permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS
-  IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-  THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-  PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
-  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-  EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  --------------------------------------------------------------------------
-  (based on BSD Open Source License)
-=end
-
-# Base class for html elements.
-# This is not a class that users would normally access.
-class Element
-  include FireWatir::Container
-  # Number of spaces that separate the property from the value in the to_s method
-  TO_S_SIZE = 14
-  
-  # How to get the nodes using XPath in mozilla.
-  ORDERED_NODE_ITERATOR_TYPE = 5
-  # To get the number of nodes returned by the xpath expression
-  NUMBER_TYPE = 1
-  # To get single node value
-  FIRST_ORDERED_NODE_TYPE = 9
-  # This stores the level to which we have gone finding element inside another element.
-  # This is just to make sure that every element has unique name in JSSH.
-  @@current_level = 0
-  # This stores the name of the element that is about to trigger an Javascript pop up.
-  #@@current_js_object = nil
-  
-  attr_accessor :element_name
-  #
-  # Description:
-  #    Creates new instance of element. If argument is not nil and is of type string this
-  #    sets the element_name and element_type property of the object. These properties can
-  #    be accessed using element_object and element_type methods respectively.
-  #
-  #    Used internally by Firewatir.
-  #
-  # Input:
-  #   element - Name of the variable with which the element is referenced in JSSh.
-  #
-  def initialize(element, container=nil)
-    @container = container
-    @element_name = element
-    @element_type = element_type
-    #puts "in initialize "
-    #puts caller(0)
-    #if(element != nil && element.class == String)
-    #@element_name = element
-    #elsif(element != nil && element.class == Element)
-    #    @o = element
-    #end
-    
-    #puts "@element_name is #{@element_name}"
-    #puts "@element_type is #{@element_type}"
-  end
-  
-  private
-  def self.def_wrap(ruby_method_name, ole_method_name = nil)
-    ole_method_name = ruby_method_name unless ole_method_name
-    class_eval "def #{ruby_method_name}
-                        assert_exists
-                        # Every element has its name starting from element. If yes then
-                        # use element_name to send the command to jssh. Else its a number
-                        # and we are still searching for element, in this case use doc.all
-                        # array with element_name as index to send command to jssh
-                        #puts element_object.to_s
-                        #if(@element_type == 'HTMLDivElement')
-                        #    ole_method_name = 'innerHTML'
-                        #end
-                        jssh_socket.send('typeof(' + element_object + '.#{ole_method_name});\n', 0)
-                        return_type = read_socket()
-
-                        return_value = get_attribute_value(\"#{ole_method_name}\")
-
-                        #if(return_value == '' || return_value == \"null\")
-                        #    return_value = \"\"
-                        #end
-
-                        if(return_type == \"boolean\")
-                            return_value = false if return_value == \"false\"
-                            return_value = true if return_value == \"true\"
-                        end
-                        #puts return_value
-                        @@current_level = 0
-                        return return_value
-                    end"
-  end
-  
-  def get_attribute_value(attribute_name)
-    #if the attribut name is columnLength get number of cells in first row if rows exist.
-    case attribute_name
-    when "columnLength"
-      rowsLength = js_eval_method "columns"
-      if (rowsLength != 0 || rowsLength != "")
-        return js_eval_method("rows[0].cells.length")
-      end
-    when "text"
-      return text
-    when "url", "href", "src", "action", "name"
-      return_value = js_eval_method("getAttribute(\"#{attribute_name}\")")
-    else
-      jssh_command = "var attribute = '';
-        if(#{element_object}.#{attribute_name} != undefined)
-            attribute = #{element_object}.#{attribute_name};
-        else
-            attribute = #{element_object}.getAttribute(\"#{attribute_name}\");
-        attribute;"
-      return_value = js_eval(jssh_command)
-    end
-    if attribute_name == "value"
-      tagName = js_eval_method("tagName").downcase
-      type = js_eval_method("type").downcase
-      
-      if tagName == "button" || ["image", "submit", "reset", "button"].include?(type)
-        if return_value == "" || return_value == "null"
-          return_value = js_eval_method "innerHTML"
-        end
-      end
-    end
-
-    if return_value == "null" || return_value =~ /\[object\s.*\]/
-      return_value = ""
-    end
-    return return_value
-  end
-  private:get_attribute_value
-  
-  
-  #
-  # Description:
-  #   Returns an array of the properties of an element, in a format to be used by the to_s method.
-  #   additional attributes are returned based on the supplied atributes hash.
-  #   name, type, id, value and disabled attributes are common to all the elements.
-  #   This method is used internally by to_s method.
-  #
-  # Output:
-  #   Array with values of the following properties:
-  #   name, type, id, value disabled and the supplied attribues list.
-  #
-  def string_creator(attributes = nil)
-    n = []
-    n << "name:".ljust(TO_S_SIZE) + get_attribute_value("name")
-    n << "type:".ljust(TO_S_SIZE) + get_attribute_value("type")
-    n << "id:".ljust(TO_S_SIZE) + get_attribute_value("id")
-    n << "value:".ljust(TO_S_SIZE) + get_attribute_value("value")
-    n << "disabled:".ljust(TO_S_SIZE) + get_attribute_value("disabled")
-    #n << "style:".ljust(TO_S_SIZE) + get_attribute_value("style")
-    #n << "class:".ljust(TO_S_SIZE) + get_attribute_value("className")
-    
-    if(attributes != nil)
-      attributes.each do |key,value|
-        n << "#{key}:".ljust(TO_S_SIZE) + get_attribute_value(value)
-      end
-    end
-    return n
-  end
-  
-  #
-  # Description:
-  #   Sets and clears the colored highlighting on the currently active element.
-  #
-  # Input:
-  #   set_or_clear - this can have following two values
-  #   :set - To set the color of the element.
-  #   :clear - To clear the color of the element.
-  #
-  def highlight(set_or_clear)
-    if set_or_clear == :set
-      #puts "element_name is : #{element_object}"
-      jssh_command = " var original_color = #{element_object}.style.background;"
-      jssh_command += " #{element_object}.style.background = \"#{DEFAULT_HIGHLIGHT_COLOR}\"; original_color;"
-      
-      # TODO: Need to change this so that it would work if user sets any other color.
-      #puts "color is : #{DEFAULT_HIGHLIGHT_COLOR}"
-      jssh_socket.send("#{jssh_command}\n", 0)
-      @original_color = read_socket()
-      
-    else # BUG: assumes is :clear, but could actually be anything
-      begin
-        jssh_socket.send("#{element_object}.style.background = \"#{@original_color}\";\n", 0)
-        read_socket()
-      rescue
-        # we could be here for a number of reasons...
-        # e.g. page may have reloaded and the reference is no longer valid
-      ensure
-        @original_color = nil
-      end
-    end
-  end
-  protected :highlight
-  
-  #
-  # Description:
-  #   Returns array of rows for a given table. Returns nil if calling element is not of table type.
-  #
-  # Output:
-  #   Array of row elements in an table or nil
-  #
-  def get_rows()
-    #puts "#{element_object} and #{element_type}"
-    if(element_type == "HTMLTableElement")
-      jssh_socket.send("#{element_object}.rows.length;\n", 0)
-      length = read_socket().to_i
-      #puts "The number of rows in the table are : #{no_of_rows}"
-      return_array = Array.new(length)
-      for i in 0..length - 1 do
-        return_array[i] = "#{element_object}.rows[#{i}]"
-      end
-      return return_array
-    else
-      puts "Trying to access rows for Element of type #{element_type}. Element must be of table type to execute this function."
-      return nil
-    end
-  end
-  private :get_rows
-  
-  def set_specifier(how, what)    
-    if how.class == Hash and what.nil?
-      specifiers = how
-    else
-      specifiers = {how => what}
-    end
-    
-    @specifiers = {:index => 1} # default if not specified
-    
-    specifiers.each do |how, what|  
-      what = what.to_i if how == :index
-      how = :href if how == :url
-      how = :value if how == :caption
-      how = :class if how == :class_name
-      
-      @specifiers[how] = what
-    end
-  end
-  
-  #
-  # Description:
-  #   Locates the element on the page depending upon the parameters passed. Logic for locating the element is written
-  #   in JavaScript and then send to JSSh; so that we don't make small round-trips via socket to JSSh. This is done to
-  #   improve the performance for locating the element.
-  #
-  # Input:
-  #   tag - Tag name of the element to be located like "input", "a" etc. This is case insensitive.
-  #   how - The attribute by which you want to locate the element like id, name etc. You can use any attribute-value pair
-  #         that uniquely identifies that element on the page. If there are more that one element that have identical
-  #         attribute-value pair then first element that is found while traversing the DOM will be returned.
-  #   what - The value of the attribute specified by how.
-  #   types - Used if that HTML element to be located has different type like input can be of type image, button etc.
-  #           Default value is nil
-  #   value - This is used only in case of radio buttons where they have same name but different value.
-  #
-  # Output:
-  #   Returns nil if unable to locate the element, else return the element.
-  #
-  def locate_tagged_element(tag, how, what, types = nil, value = nil)
-    #puts caller(0)
-    #             how = :value if how == :caption
-    #             how = :href if how == :url
-    set_specifier(how, what)
-    #puts "(locate_tagged_element)current element is : #{@container.class} and tag is #{tag}"
-    # If there is no current element i.e. element in current context we are searching the whole DOM tree.
-    # So get all the elements.
-    
-    if(types != nil and types.include?("button"))
-      jssh_command = "var isButtonElement = true;"
-    else
-      jssh_command = "var isButtonElement = false;"
-    end
-    
-    # Because in both the below cases we need to get element with respect to document.
-    # when we locate a frame document is automatically adjusted to point to HTML inside the frame
-    if(@container.class == FireWatir::Firefox || @container.class == Frame)
-      #end
-      #if(@@current_element_object == "")
-      jssh_command += "var elements_#{tag} = null; elements_#{tag} = #{DOCUMENT_VAR}.getElementsByTagName(\"#{tag}\");"
-      if(types != nil and (types.include?("textarea") or types.include?("button")) )
-        jssh_command += "elements_#{tag} = #{DOCUMENT_VAR}.body.getElementsByTagName(\"*\");"
-      end
-      #    @@has_changed = true
-    else
-      #puts "container name is: " + @container.element_name
-      #locate if defined? locate
-      #@container.locate
-      jssh_command += "var elements_#{@@current_level}_#{tag} = #{@container.element_name}.getElementsByTagName(\"#{tag}\");"
-      if(types != nil and (types.include?("textarea") or types.include?("button") ) )
-        jssh_command += "elements_#{@@current_level}_#{tag} = #{@container.element_name}.getElementsByTagName(\"*\");"
-      end
-      #    @@has_changed = false
-    end
-    
-    
-    if(types != nil)
-      jssh_command += "var types = new Array("
-      count = 0
-      types.each do |type|
-        if count == 0
-          jssh_command += "\"#{type}\""
-          count += 1
-        else
-          jssh_command += ",\"#{type}\""
-        end
-      end
-      jssh_command += ");"
-    else
-      jssh_command += "var types = null;"
-    end
-    #jssh_command += "var elements = #{element_object}.getElementsByTagName('*');"
-    jssh_command += "var object_index = 1; var o = null; var element_name = \"\";"
-    
-    if(value == nil)
-      jssh_command += "var value = null;"
-    else
-      jssh_command += "var value = \"#{value}\";"
-    end
-    
-    
-    #add hash arrays
-    sKey = "var hashKeys = new Array("
-    sVal = "var hashValues = new Array("
-    @specifiers.each do |k,v|
-      sKey += "\"#{k}\","
-      if v.class == Regexp
-        oldRegExp = v.to_s
-        newRegExp = v.inspect
-        flags = oldRegExp.slice(2, oldRegExp.index(':') - 2)
-        
-        for i in 0..flags.length do
-          flag = flags[i, 1]
-          if(flag == '-')
-            break;
-          else
-            newRegExp << flag
-          end
-        end
-        sVal += "#{newRegExp},"
-      else
-        sVal += "\"#{v}\","
-      end
-    end
-    sKey = sKey[0..sKey.length-2]
-    sVal = sVal[0..sVal.length-2]
-    jssh_command += sKey + ");"
-    jssh_command += sVal + ");"
-    
-    #index
-    jssh_command += "var target_index = 1;
-                             for(var k=0; k<hashKeys.length; k++)
-                             {
-                               if(hashKeys[k] == \"index\")
-                               {
-                                 target_index = parseInt(hashValues[k]);
-                                 break;
-                               }
-                             }"
-    
-    #jssh_command += "elements.length;"
-    if(@container.class == FireWatir::Firefox || @container.class == Frame)
-      
-      jssh_command += "for(var i=0; i<elements_#{tag}.length; i++)
-                                 {
-                                    if(element_name != \"\") break;
-                                    var element = elements_#{tag}[i];"
-    else
-      jssh_command += "for(var i=0; i<elements_#{@@current_level}_#{tag}.length; i++)
-                                 {
-                                    if(element_name != \"\") break;
-                                    var element = elements_#{@@current_level}_#{tag}[i];"
-    end
-    
-    # Because in IE for button the value of "value" attribute also corresponds to the innerHTML if value attribute
-    # is not supplied. For e.g.: <button>Sign In</button>, in this case value of "value" attribute is "Sign In"
-    # though value attribute is not supplied. But for Firefox value of "value" attribute is null. So to make sure
-    # script runs on both IE and Watir we are also considering innerHTML if element is of button type.
-    jssh_command += "   var attribute = \"\";
-                                var same_type = false;
-                                if(types)
-                                {
-                                    for(var j=0; j<types.length; j++)
-                                    {
-                                        if(types[j] == element.type || types[j] == element.tagName)
-                                        {
-                                            same_type = true;
-                                            break;
-                                        }
-                                    }
-                                }
-                                else
-                                {
-                                    same_type = true;
-                                }
-                                if(same_type == true)
-                                {
-                                    var how = \"\";
-                                    var what = null;
-                                    attribute = \"\";
-                                    for(var k=0; k<hashKeys.length; k++)
-                                    {
-                                       how = hashKeys[k];
-                                       what = hashValues[k];
-                                       
-                                       if(how == \"index\")
-                                       {
-                                          attribute = parseInt(what);
-                                          what = parseInt(what);
-                                       }
-                                       else
-                                       {
-                                          if(how == \"text\")
-                                          {
-                                             attribute = element.textContent.replace(/\\xA0/g,' ').replace(/^\\s+|\\s+$/g, '').replace(/\\s+/g, ' ')
-                                          }
-                                          else
-                                          {
-                                             if(how == \"href\" || how == \"src\" || how == \"action\" || how == \"name\")
-                                             {
-                                                attribute = element.getAttribute(how);
-                                             }
-                                             else
-                                             {
-                                                if(eval(\"element.\"+how) != undefined)
-                                                    attribute = eval(\"element.\"+how);
-                                                else
-                                                    attribute = element.getAttribute(how);
-                                             }
-                                          }
-                                          if(\"value\" == how && isButtonElement && (attribute == null || attribute == \"\"))
-                                          {
-                                             attribute = element.innerHTML;
-                                          }
-                                       }
-                                       if(attribute == \"\") o = 'NoMethodError';
-                                       var found = false;
-                                       if (typeof what == \"object\" || typeof what == \"function\") 
-			                           {
-                                          var regExp = new RegExp(what);
-                                          found = regExp.test(attribute);
-                                       }
-                                       else
-                                       {
-                                          found = (attribute == what);
-                                       }"
-    
-    #             if(what.class == Regexp)
-    #                 # Construct the regular expression because we can't use it directly by converting it to string.
-    #                 # If reg ex is /Google/i then its string conversion will be (?i-mx:Google) so we can't use it.
-    #                 # Construct the regular expression again from the string conversion.
-    #                 oldRegExp = what.to_s
-    #                 newRegExp = what.inspect
-    #                 flags = oldRegExp.slice(2, oldRegExp.index(':') - 2)
-    
-    #                 for i in 0..flags.length do
-    #                     flag = flags[i, 1]
-    #                     if(flag == '-')
-    #                         break;
-    #                     else
-    #                         newRegExp << flag
-    #                     end
-    #                 end
-    #                 #puts "old reg ex is #{what} new reg ex is #{newRegExp}"
-    #                 jssh_command += "   var regExp = new RegExp(#{newRegExp});
-    #                                     found = regExp.test(attribute);"
-    #             elsif(how == :index)
-    #                 jssh_command += "   found = (attribute == #{what});"
-    #             else
-    #                 jssh_command += "   found = (attribute == \"#{what}\");"
-    #             end
-    
-    
-    #jssh_command += "    found;"
-    if(@container.class == FireWatir::Firefox || @container.class == Frame)
-      jssh_command += "   if(found)
-                                    {
-                                        if(value)
-                                        {
-                                            if(element.value == \"#{value}\")
-                                            {
-                                                o = element;
-                                                element_name = \"elements_#{tag}[\" + i + \"]\";
-                                            }
-                                            else
-                                              break;
-                                        }
-                                        else
-                                        {
-                                            o = element;
-                                            element_name = \"elements_#{tag}[\" + i + \"]\";
-                                        }
-                                    }"
-    else
-      jssh_command += "   if(found)
-                                    {
-                                        if(value)
-                                        {
-                                            if(element.value == \"#{value}\")
-                                            {
-                                                o = element;
-                                                element_name = \"elements_#{@@current_level}_#{tag}[\" + i + \"]\";
-                                            }
-                                            else
-                                              break;
-                                        }
-                                        else
-                                        {
-                                            o = element;
-                                            element_name = \"elements_#{@@current_level}_#{tag}[\" + i + \"]\";
-                                        }
-                                    }"
-    end
-    
-    jssh_command += "
-                                    else {
-                                        o = null;
-                                        element_name = \"\";
-                                        break;
-                                    }
-                                 }
-                                 if(element_name != \"\")
-                                 {
-                                   if(target_index == object_index)
-                                   {
-                                     break;
-                                   }
-                                   else if(target_index < object_index)
-                                   {
-                                     element_name = \"\";
-                                     o = null;
-                                     break;
-                                   }
-                                   else
-                                   {
-                                     object_index += 1;
-                                     element_name = \"\";
-                                     o = null;
-                                   }
-                                 }
-                               }
-                             }
-                            element_name;"
-    
-    # Remove \n that are there in the string as a result of pressing enter while formatting.
-    jssh_command.gsub!(/\n/, "")
-    #puts jssh_command
-    #out = File.new("c:\\result.log", "w")
-    #out << jssh_command
-    #out.close
-    jssh_socket.send("#{jssh_command};\n", 0)
-    element_name = read_socket();
-    #puts "element name in find control is : #{element_name}"
-    @@current_level = @@current_level + 1
-    #puts @container
-    #puts element_name
-    if(element_name != "")
-      return element_name #Element.new(element_name, @container)
-    else
-      return nil
-    end
-  end
-  
-  #
-  # Description:
-  #   Locates frame element. Logic for locating the frame is written in JavaScript so that we don't make small
-  #   round trips to JSSh using socket. This is done to improve the performance for locating the element.
-  #
-  # Input:
-  #   how - The attribute for locating the frame. You can use any attribute-value pair that uniquely identifies
-  #         the frame on the page. If there are more than one frames that have identical attribute-value pair
-  #         then first frame that is found while traversing the DOM will be returned.
-  #   what - Value of the attribute specified by how
-  #
-  # Output:
-  #   Nil if unable to locate frame, else return the Frame element.
-  #
-  def locate_frame(how, what)
-    # Get all the frames the are there on the page.
-    #puts "how is #{how} and what is #{what}"
-    jssh_command = ""
-    if(@container.class == FireWatir::Firefox)
-      # In firefox 3 if you write Frame Name then it will not show anything. So we add .toString function to every element.
-      jssh_command = "var frameset = #{WINDOW_VAR}.frames;
-                                var elements_frames = new Array();
-                                for(var i = 0; i < frameset.length; i++)
-                                {
-                                    var frames = frameset[i].frames;
-                                    for(var j = 0; j < frames.length; j++)
-                                    {
-                                        frames[j].frameElement.toString = function() { return '[object HTMLFrameElement]'; };
-                                        elements_frames.push(frames[j].frameElement);
-
-                                    }
-                                }"
-    else
-      jssh_command = "var frames = #{@container.element_name}.contentWindow.frames;
-                                var elements_frames_#{@@current_level} = new Array();
-                                for(var i = 0; i < frames.length; i++)
-                                {
-                                    elements_frames_#{@@current_level}.push(frames[i].frameElement);
-                                }"
-    end
-    
-    jssh_command +="    var element_name = ''; var object_index = 1;var attribute = '';
-                                var element = '';"
-    if(@container.class == FireWatir::Firefox)
-      jssh_command += "for(var i = 0; i < elements_frames.length; i++)
-                                 {
-                                    element = elements_frames[i];"
-    else
-      jssh_command += "for(var i = 0; i < elements_frames_#{@@current_level}.length; i++)
-                                 {
-                                    element = elements_frames_#{@@current_level}[i];"
-    end
-    jssh_command += "       if(\"index\" == \"#{how}\")
-                                    {
-                                        attribute = object_index; object_index += 1;
-                                    }
-                                    else
-                                    {
-                                        attribute = element.getAttribute(\"#{how}\");
-                                        if(attribute == \"\" || attribute == null)
-                                        {
-                                            attribute = element.#{how};
-                                        }
-                                    }
-                                    var found = false;"
-    if(what.class == Regexp)
-      oldRegExp = what.to_s
-      newRegExp = "/" + what.source + "/"
-      flags = oldRegExp.slice(2, oldRegExp.index(':') - 2)
-      
-      for i in 0..flags.length do
-        flag = flags[i, 1]
-        if(flag == '-')
-          break;
-        else
-          newRegExp << flag
-        end
-      end
-      #puts "old reg ex is #{what} new reg ex is #{newRegExp}"
-      jssh_command += "   var regExp = new RegExp(#{newRegExp});
-                                    found = regExp.test(attribute);"
-    elsif(how == :index)
-      jssh_command += "   found = (attribute == #{what});"
-    else
-      jssh_command += "   found = (attribute == \"#{what}\");"
-    end
-    
-    jssh_command +=     "   if(found)
-                                    {"
-    if(@container.class == FireWatir::Firefox)
-      jssh_command += "       element_name = \"elements_frames[\" + i + \"]\";
-                                        #{DOCUMENT_VAR} = elements_frames[i].contentDocument;
-                                        #{BODY_VAR} = #{DOCUMENT_VAR}.body;"
-    else
-      jssh_command += "       element_name = \"elements_frames_#{@@current_level}[\" + i + \"]\";
-                                        #{DOCUMENT_VAR} = elements_frames_#{@@current_level}[i].contentDocument;
-                                        #{BODY_VAR} = #{DOCUMENT_VAR}.body;"
-    end
-    jssh_command += "           break;
-                                    }
-                                }
-                                element_name;"
-    
-    jssh_command.gsub!("\n", "")
-    #puts "jssh_command for finding frame is : #{jssh_command}"
-    
-    jssh_socket.send("#{jssh_command};\n", 0)
-    element_name = read_socket()
-    @@current_level = @@current_level + 1
-    #puts "element_name for frame is : #{element_name}"
-    
-    if(element_name != "")
-      return element_name
-    else
-      return nil
-    end
-  end
-  
-  def get_frame_html
-    jssh_socket.send("var htmlelem = #{DOCUMENT_VAR}.getElementsByTagName('html')[0]; htmlelem.innerHTML;\n", 0)
-    #jssh_socket.send("#{BODY_VAR}.innerHTML;\n", 0)
-    result = read_socket()
-    return "<html>" + result + "</html>"
-  end
-  
-  def submit_form
-    #puts "form name is : #{element_object}"
-    jssh_socket.send("#{element_object}.submit();\n" , 0)
-    read_socket()
-  end
-  
-  public
-  
-  #
-  #
-  # Description:
-  #   Matches the given text with the current text shown in the browser for that particular element.
-  #
-  # Input:
-  #   target - Text to match. Can be a string or regex
-  #
-  # Output:
-  #   Returns the index if the specified text was found.
-  #   Returns matchdata object if the specified regexp was found.
-  #
-  def contains_text(target)
-    #puts "Text to match is : #{match_text}"
-    #puts "Html is : #{self.text}"
-    if target.kind_of? Regexp
-      self.text.match(target)
-    elsif target.kind_of? String
-      self.text.index(target)
-    else
-      raise ArgumentError, "Argument #{target} should be a string or regexp."
-    end
-  end
-  #
-  # Description:
-  #   Method for inspecting the object. Defined here because IRB was not able to locate the object.
-  #   TODO: Need to find out why IRB is unable to find object though both (this and IRB) are executing same statements
-  #
-  def inspect
-    assert_exists
-    puts self.to_s
-  end
-  
-  #
-  # Description:
-  #   Returns array of elements that matches a given XPath query.
-  #   Mozilla browser directly supports XPath query on its DOM. So no need to create the DOM tree as WATiR does for IE.
-  #   Refer: http://developer.mozilla.org/en/docs/DOM:document.evaluate
-  #   Used internally by Firewatir use ff.elements_by_xpath instead.
-  #
-  # Input:
-  #   xpath - The xpath expression or query.
-  #
-  # Output:
-  #   Array of elements that matched the xpath expression provided as parameter.
-  #
-  def elements_by_xpath(container, xpath)
-    rand_no = rand(1000)
-    #jssh_command = "var xpathResult = #{DOCUMENT_VAR}.evaluate(\"count(#{xpath})\", #{DOCUMENT_VAR}, null, #{NUMBER_TYPE}, null); xpathResult.numberValue;"
-    #jssh_socket.send("#{jssh_command}\n", 0);
-    #node_count = read_socket()
-    
-    jssh_command = "var element_xpath_#{rand_no} = new Array();"
-    
-    jssh_command += "var result = #{DOCUMENT_VAR}.evaluate(\"#{xpath}\", #{DOCUMENT_VAR}, null, #{ORDERED_NODE_ITERATOR_TYPE}, null);
-                             var iterate = result.iterateNext();
-                             while(iterate)
-                             {
-                                element_xpath_#{rand_no}.push(iterate);
-                                iterate = result.iterateNext();
-                             }
-                             element_xpath_#{rand_no}.length;
-                             "
-    
-    # Remove \n that are there in the string as a result of pressing enter while formatting.
-    jssh_command.gsub!(/\n/, "")
-    #puts jssh_command
-    jssh_socket.send("#{jssh_command};\n", 0)             
-    node_count = read_socket()
-    #puts "value of count is : #{node_count}"
-    
-    elements = Array.new(node_count.to_i)
-    
-    for i in 0..elements.length - 1 do
-      elements[i] = "element_xpath_#{rand_no}[#{i}]"
-    end
-    
-    return elements;
-  end
-  
-  #
-  # Description:
-  #   Returns first element found while traversing the DOM; that matches an given XPath query.
-  #   Mozilla browser directly supports XPath query on its DOM. So no need to create the DOM tree as WATiR does for IE.
-  #   Refer: http://developer.mozilla.org/en/docs/DOM:document.evaluate
-  #   Used internally by Firewatir use ff.element_by_xpath instead.
-  #
-  # Input:
-  #   xpath - The xpath expression or query.
-  #
-  # Output:
-  #   First element in DOM that matched the XPath expression or query.
-  #
-  def element_by_xpath(container, xpath)
-    #puts "here locating element by xpath"
-    rand_no = rand(1000)
-    jssh_command = "var element_xpath_#{rand_no} = null; element_xpath_#{rand_no} = #{DOCUMENT_VAR}.evaluate(\"#{xpath}\", #{DOCUMENT_VAR}, null, #{FIRST_ORDERED_NODE_TYPE}, null).singleNodeValue; element_xpath_#{rand_no};"
-    
-    jssh_socket.send("#{jssh_command}\n", 0)             
-    result = read_socket()
-    #puts "command send to jssh is : #{jssh_command}"
-    #puts "result is : #{result}"
-    if(result == "null" || result == "" || result.include?("exception"))
-      @@current_level = 0
-      return nil
-    else
-      @@current_level += 1
-      return "element_xpath_#{rand_no}"
-    end
-  end
-  
-  #
-  # Description:
-  #   Returns the name of the element with which we can access it in JSSh.
-  #   Used internally by Firewatir to execute methods, set properties or return property value for the element.
-  #
-  # Output:
-  #   Name of the variable with which element is referenced in JSSh
-  #
-  def element_object
-    #puts caller.join("\n")
-    #puts "In element_object element name is : #{@element_name}"
-    #puts "in element_object : #{@container.class}"
-    #if(@container.class == FireWatir::Firefox)
-    return @element_name #if @element_name != nil
-    #else
-    #    return @container.element_name
-    #end
-    #return @o.element_name if @o != nil
-  end
-  private :element_object
-  
-  #
-  # Description:
-  #   Returns the type of element. For e.g.: HTMLAnchorElement. used internally by Firewatir
-  #
-  # Output:
-  #   Type of the element.
-  #
-  def element_type
-    #puts "in element_type object is : #{element_object}"
-    # Get the type of the element.
-    jssh_socket.send("#{element_object};\n", 0)
-    temp = read_socket()
-    
-    if temp == ""
-      return nil
-    end
-    
-    #puts "#{element_object} and type is #{temp}"
-    temp =~ /\[object\s(.*)\]/
-    if $1
-      return $1
-    else
-      # This is done because in JSSh if you write element name of anchor type
-      # then it displays the link to which it navigates instead of displaying
-      # object type. So above regex match will return nil
-      return "HTMLAnchorElement"
-    end
-  end
-  #private :element_type
-  
-  #
-  # Description:
-  #   Fires the provided event for an element and by default waits for the action to get completed.
-  #
-  # Input:
-  #   event - Event to be fired like "onclick", "onchange" etc.
-  #   wait - Whether to wait for the action to get completed or not. By default its true.
-  #
-  # TODO: Provide ability to specify event parameters like keycode for key events, and click screen
-  #       coordinates for mouse events.
-  def fire_event(event, wait = true)
-    assert_exists()
-    event = event.to_s # in case event was given as a symbol
-    
-    event = event.downcase
-    
-    event =~ /on(.*)/i
-    event = $1 if $1
-    
-    # check if we've got an old-school on-event
-    #jssh_socket.send("typeof(#{element_object}.#{event});\n", 0)
-    #is_defined = read_socket()
-    
-    # info about event types harvested from:
-    #   http://www.howtocreate.co.uk/tutorials/javascript/domevents
-    case event
-      when 'abort', 'blur', 'change', 'error', 'focus', 'load', 'reset', 'resize',
-                    'scroll', 'select', 'submit', 'unload'
-      dom_event_type = 'HTMLEvents'
-      dom_event_init = "initEvent(\"#{event}\", true, true)"
-      when 'keydown', 'keypress', 'keyup'
-      dom_event_type = 'KeyEvents'
-      # Firefox has a proprietary initializer for keydown/keypress/keyup.
-      # Args are as follows:
-      #   'type', bubbles, cancelable, windowObject, ctrlKey, altKey, shiftKey, metaKey, keyCode, charCode
-      dom_event_init = "initKeyEvent(\"#{event}\", true, true, #{WINDOW_VAR}, false, false, false, false, 0, 0)"
-      when 'click', 'dblclick', 'mousedown', 'mousemove', 'mouseout', 'mouseover',
-                    'mouseup'
-      dom_event_type = 'MouseEvents'
-      # Args are as follows:
-      #   'type', bubbles, cancelable, windowObject, detail, screenX, screenY, clientX, clientY, ctrlKey, altKey, shiftKey, metaKey, button, relatedTarget
-      dom_event_init = "initMouseEvent(\"#{event}\", true, true, #{WINDOW_VAR}, 1, 0, 0, 0, 0, false, false, false, false, 0, null)"
-    else
-      dom_event_type = 'HTMLEvents'
-      dom_event_init = "initEvents(\"#{event}\", true, true)"
-    end
-    
-    if(element_type == "HTMLSelectElement")
-      dom_event_type = 'HTMLEvents'
-      dom_event_init = "initEvent(\"#{event}\", true, true)"
-    end
-    
-    
-    jssh_command  = "var event = #{DOCUMENT_VAR}.createEvent(\"#{dom_event_type}\"); "
-    jssh_command << "event.#{dom_event_init}; "
-    jssh_command << "#{element_object}.dispatchEvent(event);"
-    
-    #puts "JSSH COMMAND:\n#{jssh_command}\n"
-    
-    jssh_socket.send("#{jssh_command}\n", 0)
-    read_socket() if wait
-    wait() if wait
-    
-    @@current_level = 0
-  end
-  alias fireEvent fire_event
-  
-  #
-  # Description:
-  #   Returns the value of the specified attribute of an element.
-  #
-  def attribute_value(attribute_name)
-    #puts attribute_name
-    assert_exists()
-    return_value = get_attribute_value(attribute_name)
-    @@current_level = 0
-    return return_value
-  end
-  
-  #
-  # Description:
-  #   Checks if element exists or not. Raises UnknownObjectException if element doesn't exists.
-  #
-  def assert_exists
-    unless exists?
-      raise UnknownObjectException.new(
-                                       Watir::Exception.message_for_unable_to_locate(@how, @what))
-    end
-  end
-  
-  #
-  # Description:
-  #   Checks if element is enabled or not. Raises ObjectDisabledException if object is disabled and
-  #   you are trying to use the object.
-  #
-  def assert_enabled
-    unless enabled?
-      raise ObjectDisabledException, "object #{@how} and #{@what} is disabled"
-    end
-  end
-  
-  #
-  # Description:
-  #   First checks if element exists or not. Then checks if element is enabled or not.
-  #
-  # Output:
-  #   Returns true if element exists and is enabled, else returns false.
-  #
-  def enabled?
-    assert_exists
-    value = js_eval_method "disabled"
-    @@current_level = 0
-    return true if(value == "false")
-    return false if(value == "true")
-    return value
-  end
-  
-  #
-  # Description:
-  #   Checks if element exists or not. If element is not located yet then first locates the element.
-  #
-  # Output:
-  #   True if element exists, false otherwise.
-  #
-  def exists?
-    #puts "element is : #{element_object}"
-    #puts caller(0)
-    # If elements array has changed locate the element again. So that the element name points to correct element.
-    if(element_object == nil || element_object == "")
-      @@current_level = 0
-      #puts "locating element"
-      locate if defined?(locate)
-      if(@element_name == nil || @element_name == "")
-        return false
-      else
-        #puts caller(0)
-        #puts "element name is : #{@element_name}"
-        return true
-      end
-    else
-      #puts "not locating the element again"
-      return true
-    end
-    #@@current_level = 0
-    #if(element_object == nil || element_object == "")
-    #    return false
-    #else
-    #    return true
-    #end
-  end
-  alias exist? exists?
-  
-  #
-  # Description:
-  #   Returns the text of the element.
-  #
-  # Output:
-  #   Text of the element.
-  #
-  def text()
-    assert_exists
-    element = (element_type == "HTMLFrameElement") ? BODY_VAR : element_object
-    return_value = js_eval("#{element}.textContent.replace(/\\xA0/g, ' ').replace(/\\s+/g, ' ')").strip
-    @@current_level = 0
-    return return_value
-  end
-  alias innerText text
-  
-  # Returns the name of the element (as defined in html)
-  def_wrap :name
-  # Returns the id of the element
-  def_wrap :id
-  # Returns whether the element is disabled
-  def disabled
-    ! enabled?
-  end
-  alias disabled? disabled
-  # Returns the state of the element
-  def_wrap :checked
-  # Returns the value of the element
-  def_wrap :value
-  # Returns the title of the element
-  def_wrap :title
-  # Returns the value of 'alt' attribute in case of Image element.
-  def_wrap :alt
-  # Returns the value of 'href' attribute in case of Anchor element.
-  def_wrap :src
-  # Returns the type of the element. Use in case of Input element only.
-  def_wrap :type
-  # Returns the url the Anchor element points to.
-  def_wrap :href
-  # Return the ID of the control that this label is associated with
-  def_wrap :for, :htmlFor
-  # Returns the class name of the element
-  def_wrap :class_name, :className
-  # Return the html of the object
-  def_wrap :html, :innerHTML
-  # Return the action of form
-  def_wrap :action
-  
-  #
-  # Description:
-  #   Display basic details about the object. Sample output for a button is shown.
-  #   Raises UnknownObjectException if the object is not found.
-  #      name      b4
-  #      type      button
-  #      id         b5
-  #      value      Disabled Button
-  #      disabled   true
-  #
-  # Output:
-  #   Array with value of properties shown above.
-  #
-  def to_s(attributes=nil)
-    #puts "here in to_s"
-    #puts caller(0)
-    assert_exists
-    if(element_type == "HTMLTableCellElement")
-      return text()
-    else
-      result = string_creator(attributes) #.join("\n")
-      @@current_level = 0
-      return result
-    end
-  end
-  
-  #
-  # Description:
-  #   Function to fire click event on elements.
-  #
-  def click
-    assert_exists
-    assert_enabled
-    
-    highlight(:set)
-    #puts "#{element_object} and #{element_type}"
-    case element_type
-      
-      when "HTMLAnchorElement", "HTMLImageElement"
-      # Special check for link or anchor tag. Because click() doesn't work on links.
-      # More info: http://www.w3.org/TR/DOM-Level-2-HTML/html.html#ID-48250443
-      # https://bugzilla.mozilla.org/show_bug.cgi?id=148585
-      
-      jssh_command = "var event = #{DOCUMENT_VAR}.createEvent(\"MouseEvents\");"
-      
-      # Info about initMouseEvent at: http://www.xulplanet.com/references/objref/MouseEvent.html
-      jssh_command += "event.initMouseEvent('click',true,true,null,1,0,0,0,0,false,false,false,false,0,null);"
-      jssh_command += "#{element_object}.dispatchEvent(event);\n"
-      
-      #puts "jssh_command is: #{jssh_command}"
-      jssh_socket.send("#{jssh_command}", 0)
-      read_socket()
-    else
-      jssh_socket.send("typeof(#{element_object}.click);\n", 0)
-      isDefined = read_socket()
-      if(isDefined == "undefined")
-        fire_event("onclick")
-      else
-        jssh_socket.send("#{element_object}.click();\n" , 0)
-        read_socket()
-      end
-    end
-    highlight(:clear)
-    # Wait for firefox to reload.
-    wait()
-  end
-  
-  #
-  # Description:
-  #   Wait for the browser to get loaded, after the event is being fired.
-  #
-  def wait
-    #ff = FireWatir::Firefox.new
-    #ff.wait()
-    #puts @container
-    @container.wait()
-    @@current_level = 0
-  end
-  
-  #
-  # Description:
-  #   Function is used for click events that generates javascript pop up.
-  #   Doesn't fire the click event immediately instead, it stores the state of the object. User then tells which button
-  #   is to be clicked in case a javascript pop up comes after clicking the element. Depending upon the button to be clicked
-  #   the functions 'alert' and 'confirm' are re-defined in JavaScript to return appropriate values either true or false. Then the
-  #   re-defined functions are send to jssh which then fires the click event of the element using the state
-  #   stored above. So the click event is fired in the second statement. Therefore, if you are using this function you
-  #   need to call 'click_js_popup_button()' function in the next statement to actually trigger the click event.
-  #
-  #   Typical Usage:
-  #       ff.button(:id, "button").click_no_wait()
-  #       ff.click_js_popup_button("OK")
-  #
-  #def click_no_wait
-  #    assert_exists
-  #    assert_enabled
-  #
-  #    highlight(:set)
-  #    @@current_js_object = Element.new("#{element_object}", @container)
-  #end
-  
-  #
-  # Description:
-  #   Function to click specified button on the javascript pop up. Currently you can only click
-  #   either OK or Cancel button.
-  #   Functions alert and confirm are redefined so that it doesn't causes the JSSH to get blocked. Also this
-  #   will make Firewatir cross platform.
-  #
-  # Input:
-  #   button to be clicked
-  #
-  #def click_js_popup(button = "OK")
-  #    jssh_command = "var win = #{BROWSER_VAR}.contentWindow;"
-  #    if(button =~ /ok/i)
-  #        jssh_command += "var popuptext = '';win.alert = function(param) {popuptext = param; return true; };
-  #                         win.confirm = function(param) {popuptext = param; return true; };"
-  #    elsif(button =~ /cancel/i)
-  #        jssh_command += "var popuptext = '';win.alert = function(param) {popuptext = param; return false; };
-  #                         win.confirm = function(param) {popuptext = param; return false; };"
-  #    end
-  #    jssh_command.gsub!(/\n/, "")
-  #    jssh_socket.send("#{jssh_command}\n", 0)
-  #    read_socket()
-  #    click_js_popup_creator_button()
-  #    #jssh_socket.send("popuptext_alert;\n", 0)
-  #    #read_socket()
-  #    jssh_socket.send("\n", 0)
-  #    read_socket()
-  #end
-  
-  #
-  # Description:
-  #   Clicks on button or link or any element that triggers a javascript pop up.
-  #   Used internally by function click_js_popup.
-  #
-  #def click_js_popup_creator_button
-  #    #puts @@current_js_object.element_name
-  #    jssh_socket.send("#{@@current_js_object.element_name}\n;", 0)
-  #    temp = read_socket()
-  #    temp =~ /\[object\s(.*)\]/
-  #    if $1
-  #        type = $1
-  #    else
-  #        # This is done because in JSSh if you write element name of anchor type
-  #        # then it displays the link to which it navigates instead of displaying
-  #        # object type. So above regex match will return nil
-  #        type = "HTMLAnchorElement"
-  #    end
-  #    #puts type
-  #    case type
-  #        when "HTMLAnchorElement", "HTMLImageElement"
-  #            jssh_command = "var event = #{DOCUMENT_VAR}.createEvent(\"MouseEvents\");"
-  #            # Info about initMouseEvent at: http://www.xulplanet.com/references/objref/MouseEvent.html
-  #            jssh_command += "event.initMouseEvent('click',true,true,null,1,0,0,0,0,false,false,false,false,0,null);"
-  #            jssh_command += "#{@@current_js_object.element_name}.dispatchEvent(event);\n"
-  #
-  #            jssh_socket.send("#{jssh_command}", 0)
-  #            read_socket()
-  #        when "HTMLDivElement", "HTMLSpanElement"
-  #             jssh_socket.send("typeof(#{element_object}.#{event.downcase});\n", 0)
-  #             isDefined = read_socket()
-  #             #puts "is method there : #{isDefined}"
-  #             if(isDefined != "undefined")
-  #                 if(element_type == "HTMLSelectElement")
-  #                     jssh_command = "var event = #{DOCUMENT_VAR}.createEvent(\"HTMLEvents\");
-  #                                     event.initEvent(\"click\", true, true);
-  #                                     #{element_object}.dispatchEvent(event);"
-  #                     jssh_command.gsub!(/\n/, "")
-  #                     jssh_socket.send("#{jssh_command}\n", 0)
-  #                     read_socket()
-  #                 else
-  #                     jssh_socket.send("#{element_object}.#{event.downcase}();\n", 0)
-  #                     read_socket()
-  #                 end
-  #             end
-  #        else
-  #            jssh_command = "#{@@current_js_object.element_name}.click();\n";
-  #            jssh_socket.send("#{jssh_command}", 0)
-  #            read_socket()
-  #    end
-  #    @@current_level = 0
-  #    @@current_js_object = nil
-  #end
-  #private :click_js_popup_creator_button
-  
-  #
-  # Description:
-  #   Gets all the options of the select list element.
-  #
-  # Output:
-  #   Array of option elements.
-  #
-  def options
-    jssh_socket.send("#{element_object}.options.length;\n", 0)
-    length = read_socket().to_i
-    #puts "options length is : #{length}"
-    arr_options = Array.new(length)
-    for i in 0..length - 1
-      arr_options[i] = "#{element_object}.options[#{i}]"
-    end
-    return arr_options
-  end
-  private :options
-  
-  #
-  # Description:
-  #   Used to get class name for option element. Used internally by Firewatir use ff.select_list(...).option(..).class
-  #
-  # Output:
-  #   Class name of option element.
-  #
-  def option_class_name
-    jssh_socket.send("#{element_object}.className;\n", 0)
-    return read_socket()
-  end
-  private :option_class_name
-  
-  #
-  # Description:
-  #   Used to get text for option element. Used internally by Firewatir use ff.select_list(...).option(..).text
-  #
-  # Output:
-  #   Text of option element.
-  #
-  def option_text
-    jssh_socket.send("#{element_object}.text;\n", 0)
-    return read_socket()
-  end
-  private :option_text
-  
-  #
-  # Description:
-  #   Used to get value for option element. Used internally by Firewatir use ff.select_list(...).option(..).value
-  #
-  # Output:
-  #   Value of option element.
-  #
-  def option_value
-    jssh_socket.send("#{element_object}.value;\n", 0)
-    return read_socket()
-  end
-  private :option_value
-  
-  #
-  # Description:
-  #   Used to check if option is selected or not. Used internally by Firewatir use ff.select_list(...).option(..).selected
-  #
-  # Output:
-  #   True if option is selected, false otherwise.
-  #
-  def option_selected
-    jssh_socket.send("#{element_object}.selected;\n", 0)
-    value = read_socket()
-    return true if value == "true"
-    return false if value == "false"
-  end
-  private :option_selected
-  
-  #
-  # Description:
-  #   Gets all the cells of the row of a table.
-  #
-  # Output:
-  #   Array of table cell elements.
-  #
-  def get_cells
-    assert_exists
-    #puts "element name in cells is : #{element_object}"
-    if(element_type == "HTMLTableRowElement")
-      jssh_socket.send("#{element_object}.cells.length;\n", 0)
-      length = read_socket.to_i
-      return_array = Array.new(length)
-      for i in 0..length - 1 do
-        return_array[i] = "#{element_object}.cells[#{i}]"
-      end
-      return return_array
-    else
-      puts "The element must be of table row type to execute this function."
-      return nil
-    end
-  end
-  private :get_cells
-  
-  #
-  # Description:
-  #   Sets the value of file in HTMLInput file field control.
-  #
-  # Input:
-  #   setPath - location of the file to be uploaded. '|' should not be part of filename.
-  #
-  def setFileFieldValue(setPath)
-    # As ruby converts \\ to \ and while sending name to jssh \ is ignored.
-    # So replace \ with \\. Now this is even trickier you can't replace \ with \\
-    # directly like this string.gsub!("\\", "\\\\") this doesn't work.
-    # Work around is replace '\' with two special character and then replace
-    # special character with \.
-    setPath.gsub!("\\", "||")
-    setPath.gsub!("|", "\\")
-    
-    #jssh_command = "var textBox = #{DOCUMENT_VAR}.getBoxObjectFor(#{element_object}).firstChild;"
-    #jssh_command += "textBox.value = \"#{setPath}\";\n";
-    
-    #puts jssh_command
-    jssh_socket.send("#{element_object}.value = \"#{setPath}\";\n", 0)
-    read_socket()
-    @@current_level = 0
-  end
-  private :setFileFieldValue
-  
-  #
-  # Description:
-  #   Traps all the function calls for an element that is not defined and fires them again
-  #   as it is to the jssh. This can be used in case the element supports properties or methods
-  #   that are not defined in the corresponding element class or in the base class(Element).
-  #
-  # Input:
-  #   methodId - Id of the method that is called.
-  #   *args - arguments sent to the methods.
-  #
-  def method_missing(methId, *args)
-    methodName = methId.id2name
-    #puts "method name is : #{methodName}"
-    assert_exists
-    #assert_enabled
-    methodName = "colSpan" if methodName == "colspan"
-    if(methodName =~ /invoke/)
-      jssh_command = "#{element_object}."
-      for i in args do
-        jssh_command += i;
-      end
-      #puts "#{jssh_command}"
-      jssh_socket.send("#{jssh_command};\n", 0)
-      return_value = read_socket()
-      #puts "return value is : #{return_value}"
-      return return_value
-    else
-      #assert_exists
-      #puts "element name is #{element_object}"
-      
-      # We get method name with trailing '=' when we try to assign a value to a
-      # property. So just remove the '=' to get the type
-      temp = ""
-      assigning_value = false
-      if(methodName =~ /(.*)=$/)
-        temp  = "#{element_object}.#{$1}"
-        assigning_value = true
-      else
-        temp = "#{element_object}.#{methodName}"
-      end
-      #puts "temp is : #{temp}"
-      
-      jssh_socket.send("typeof(#{temp});\n", 0)
-      method_type = read_socket()
-      #puts "method_type is : #{method_type}"
-      
-      if(assigning_value)
-        if(method_type != "boolean" && args[0].class != Fixnum)
-          args[0].gsub!("\\", "\\"*4)
-          args[0].gsub!("\"", "\\\"")
-          args[0].gsub!("\n","\\n")
-          jssh_command = "#{element_object}.#{methodName}\"#{args[0]}\""
-        else
-          jssh_command = "#{element_object}.#{methodName}#{args[0]}"
-        end
-        #puts "jssh_command is : #{jssh_command}"
-        jssh_socket.send("#{jssh_command};\n", 0)
-        read_socket()
-        return
-      end
-      
-      methodName = "#{element_object}.#{methodName}"
-      if(args.length == 0)
-        #puts "In if loop #{methodName}"
-        if(method_type == "function")
-          jssh_command =  "#{methodName}();\n"
-        else
-          jssh_command =  "#{methodName};\n"
-        end
-      else
-        #puts "In else loop : #{methodName}"
-        jssh_command =  "#{methodName}("
-        
-        count = 0
-        if args != nil
-          for i in args
-            jssh_command += "," if count != 0
-            if i.kind_of? Numeric
-              jssh_command += i.to_s
-            else
-              jssh_command += "\"#{i.to_s.gsub(/"/,"\\\"")}\""
-          end
-          count = count + 1
-        end
-      end
-      
-      jssh_command += ");\n"
-    end
-    
-    if(method_type == "boolean")
-      jssh_command = jssh_command.gsub("\"false\"", "false")
-      jssh_command = jssh_command.gsub("\"true\"", "true")
-    end
-    #puts "jssh_command is #{jssh_command}"
-    jssh_socket.send("#{jssh_command}", 0)
-    returnValue = read_socket()
-    #puts "return value is : #{returnValue}"
-    
-    @@current_level = 0
-    
-    if(method_type == "boolean")
-      return false if(returnValue == "false")
-      return true if(returnValue == "true")
-    elsif(method_type == "number")
-      return returnValue.to_i
-    else
-      return returnValue
-    end
-  end
-end
-end
-
-#
-# Description:
-#   Class for returning the document element.
-#
-class Document
-include FireWatir::Container
-@@current_level = 0
-
-#
-# Description:
-#   Creates new instance of Document class.
-#
-def initialize(container)
-  @length = 0
-  @elements = nil
-  @arr_elements = ""
-  @container = container
-end
-
-#
-# Description:
-#   Find all the elements in the document by querying DOM.
-#   Set the class variables like length and the variable name of array storing the elements in JSSH.
-#
-# Output:
-#   Array of elements.
-#
-def all
-  @arr_elements = "arr_coll_#{@@current_level}"
-  jssh_command = "var arr_coll_#{@@current_level}=new Array(); "
-  
-  if(@container.class == FireWatir::Firefox || @container.class == Frame)
-    jssh_command +="var element_collection = null; element_collection = #{DOCUMENT_VAR}.getElementsByTagName(\"*\");
-                            if(element_collection != null && typeof(element_collection) != 'undefined')
-                            {
-                                for (var i = 0; i < element_collection.length; i++)
-                                {
-                                    if((element_collection[i].tagName != 'BR') && (element_collection[i].tagName != 'HR') && (element_collection[i].tagName != 'DOCTYPE') && (element_collection[i].tagName != 'META') && (typeof(element_collection[i].tagName) != 'undefined'))
-                                        arr_coll_#{@@current_level}.push(element_collection[i]);
-                                }
-                            }
-                            arr_coll_#{@@current_level}.length;"
-  else
-    jssh_command +="var element_collection = null; element_collection = #{@container.element_name}.getElementsByTagName(\"*\");
-                                if(element_collection!= null && typeof(element_collection) != 'undefined')
-                                {
-                                    for (var i = 0; i < element_collection.length; i++)
-                                    {
-                                        if((element_collection[i].tagName != 'BR') && (element_collection[i].tagName != 'HR') && (element_collection[i].tagName != 'DOCTYPE') && (element_collection[i].tagName != 'META') && (typeof(element_collection[i].tagName) != 'undefined'))
-                                        arr_coll_#{@@current_level}.push(element_collection[i]);
-                                    }
-                                }
-                                arr_coll_#{@@current_level}.length;"
-  end
-  
-  # Remove \n that are there in the string as a result of pressing enter while formatting.
-  jssh_command.gsub!(/\n/, "")
-  #puts  jssh_command
-  jssh_socket.send("#{jssh_command};\n", 0)
-  @length = read_socket().to_i;
-  #puts "elements length is in locate_tagged_elements is : #{@length}"
-  
-  elements = nil
-  elements = Array.new(@length)
-  for i in 0..@length - 1 do
-    temp = Element.new("arr_coll_#{@@current_level}[#{i}]", @container)
-    elements[i] = temp
-  end
-  @@current_level += 1
-  return elements
-  
-end
-
-#
-# Description:
-#   Returns the count of elements in the document.
-#
-# Output:
-#   Count of elements found in the document.
-#
-def length
-  return @length
-end
-
-#
-# Description:
-#   Iterates over elements in the document.
-#
-def each
-  for i in 0..@length - 1
-    yield Element.new("#{@arr_elements}[#{i}]", @container)
-  end
-end
-
-#
-# Description:
-#   Gets the element at the nth index in the array of the elements.
-#
-# Input:
-#   n - Index of element you want to access. Index is 1 based.
-#
-# Output:
-#   Element at the nth index.
-#
-def [](n)
-  return Element.new("#{@arr_elements}[#{n-1}]", @container)
-end
-
-#
-# Description:
-#   Get all forms available on the page.
-#   Used internally by Firewatir use ff.show_forms instead.
-#
-# Output:
-#   Array containing Form elements
-#
-def get_forms()
-  jssh_socket.send("var element_forms = #{DOCUMENT_VAR}.forms; element_forms.length;\n", 0)
-  length = read_socket().to_i
-  forms = Array.new(length)
-  
-  for i in 0..length - 1 do
-    forms[i] = Form.new(@container, :jssh_name, "element_forms[#{i}]")
-  end
-  return forms
-end
-
-#
-# Description:
-#   Get all images available on the page.
-#   Used internally by Firewatir use ff.show_images instead.
-#
-# Output:
-#   Array containing Image elements
-#
-def get_images
-  return Images.new(@container)
-end
-
-#
-# Description:
-#   Get all links available on the page.
-#   Used internally by Firewatir use ff.show_links instead.
-#
-# Output:
-#   Array containing Link elements
-#
-def get_links
-  return Links.new(@container)
-end
-
-#
-# Description:
-#   Get all divs available on the page.
-#   Used internally by Firewatir use ff.show_divs instead.
-#
-# Output:
-#   Array containing Div elements
-#
-def get_divs
-  return Divs.new(@container)
-end
-
-#
-# Description:
-#   Get all tables available on the page.
-#   Used internally by Firewatir use ff.show_tables instead.
-#
-# Output:
-#   Array containing Table elements
-#
-def get_tables
-  return Tables.new(@container)
-end
-
-#
-# Description:
-#   Get all pres available on the page.
-#   Used internally by Firewatir use ff.show_pres instead.
-#
-# Output:
-#   Array containing Pre elements
-#
-def get_pres
-  return Pres.new(@container)
-end
-
-#
-# Description:
-#   Get all spans available on the page.
-#   Used internally by Firewatir use ff.show_spans instead.
-#
-# Output:
-#   Array containing Span elements
-#
-def get_spans
-  return Spans.new(@container)
-end
-
-#
-# Description:
-#   Get all labels available on the page.
-#   Used internally by Firewatir use ff.show_labels instead.
-#
-# Output:
-#   Array containing Label elements
-#
-def get_labels
-  return Labels.new(@container)
-end
-end
-
-#
-# Description:
-#   Class for iterating over elements of common type like links, images, divs etc.
-#
-class ElementCollections
-def self.inherited subclass
-  class_name = subclass.to_s.demodulize
-  method_name = class_name.underscore
-  element_class_name = class_name.singularize
-  
-  FireWatir::Container.module_eval "def #{method_name}
-          locate if defined?(locate)
-          return #{class_name}.new(self); end"
-  
-  subclass.class_eval "def element_class; #{element_class_name}; end"
-end
-
-include FireWatir::Container # XXX not sure if this is right
-@@current_level = 0
-
-def initialize(container)
-  @container = container
-  elements = locate_elements
-  length = elements.length
-  #puts "length is : #{length}"
-  @element_objects = Array.new(length)
-  for i in 0..length - 1 do
-    @element_objects[i] = element_class.new(container, :jssh_name, elements[i])
-  end
-end
-
-# default implementation. overridden by some subclasses.
-def locate_elements
-  locate_tagged_elements(element_class::TAG)
-end
-
-
-# Return all the elements of give tag and type inside the container.
-#
-# Input:
-#   tag - tag name of the elements
-#   types - array of element type names. used in case where same 
-#   element tag has different types like input has type image, button etc.
-#
-def locate_tagged_elements(tag, types = [])
-
-  # generate array to hold results
-  result_name = "arr_coll_#{tag}_#{@@current_level}"
-  jssh_command = "var #{result_name}=new Array();"
-
-  # generate array of elements matching the tag
-  case @container
-    when FireWatir::Firefox, FireWatir::Frame
-      elements_tag = "elements_#{tag}"
-      container_name = DOCUMENT_VAR
-    else
-      elements_tag = "elements_#{@@current_level}_#{tag}"
-      container_name = @container.element_name
-    end
-  if types.include?("textarea") || types.include?("button")
-    search_tag = '*'
-  else
-    search_tag = tag
-  end
-  jssh_command += "var #{elements_tag} = null; "
-  jssh_command += "#{elements_tag} = #{container_name}.getElementsByTagName(\"#{search_tag}\");"
-
-    
-  # generate array containing results
-  if types.empty?
-    jssh_command += "#{result_name} = #{elements_tag};"
-  else
-    # generate types array
-    jssh_command += "var types = new Array("
-    types.each_with_index do |type, count|
-      jssh_command += "," unless count == 0
-      jssh_command += "\"#{type}\""
-    end
-    jssh_command += ");"
-
-    # check the type of each element
-    jssh_command += "for(var i=0; i<#{elements_tag}.length; i++)
-                       {
-                          var element = #{elements_tag}[i];
-                          var same_type = false;
-    
-                          for(var j=0; j<types.length; j++)
-                          {
-                              if(types[j] == element.type || types[j] == element.tagName)
-                              {
-                                  same_type = true;
-                                  break;
-                              }
-                          }
-  
-                          if(same_type)
-                          {
-                              #{result_name}.push(element);
-                          }
-                      };"
-  end
-  jssh_command += "#{result_name}.length;"
-  
-  # Remove \n that are there in the string as a result of pressing enter while formatting.
-  jssh_command.gsub!(/\n/, "")
-  #puts jssh_command
-  jssh_socket.send("#{jssh_command};\n", 0)
-  length = read_socket().to_i;
-  #puts "elements length is in locate_tagged_elements is : #{length}"
-  
-  elements = (0...length).collect {|i| "#{result_name}[#{i}]"}
-
-  @@current_level = @@current_level + 1
-  return elements
-end
-private :locate_tagged_elements
-
-#
-# Description:
-#   Gets the length of elements of same tag and type found on the page.
-#
-# Ouput:
-#   Count of elements found on the page.
-#
-def length
-  return @element_objects.length
-end
-
-#
-# Description:
-#   Iterate over the elements of same tag and type found on the page.
-#
-def each
-  for i in 0..@element_objects.length - 1
-    yield @element_objects[i]
-  end
-end
-
-#
-# Description:
-#   Accesses nth element of same tag and type found on the page.
-#
-# Input:
-#   n - index of element (1 based)
-#
-def [](n)
-  return @element_objects[n-1]
-end
-
-end