ffi 1.9.18-x86-mingw32 → 1.9.21-x86-mingw32

data/ext/ffi_c/libffi/src/s390/ffitarget.h

@@ -1,5 +1,6 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (c) 1996-2003  Red Hat, Inc.
    Target configuration macros for S390.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -27,6 +28,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 #if defined (__s390x__)
 #ifndef S390X
 #define S390X
@@ -47,10 +52,13 @@ typedef enum ffi_abi {
 } ffi_abi;
 #endif
 
+#define FFI_TARGET_SPECIFIC_STACK_SPACE_ALLOCATION
+#define FFI_TARGET_HAS_COMPLEX_TYPE
 
 /* ---- Definitions for closures ----------------------------------------- */
 
 #define FFI_CLOSURES 1
+#define FFI_GO_CLOSURES 1
 #ifdef S390X
 #define FFI_TRAMPOLINE_SIZE 32
 #else

data/ext/ffi_c/libffi/src/s390/internal.h

@@ -0,0 +1,11 @@
+/* If these values change, sysv.S must be adapted!  */
+#define FFI390_RET_DOUBLE	0
+#define FFI390_RET_FLOAT	1
+#define FFI390_RET_INT64	2
+#define FFI390_RET_INT32	3
+#define FFI390_RET_VOID		4
+
+#define FFI360_RET_MASK		7
+#define FFI390_RET_IN_MEM	8
+
+#define FFI390_RET_STRUCT	(FFI390_RET_VOID | FFI390_RET_IN_MEM)

data/ext/ffi_c/libffi/src/s390/sysv.S

@@ -1,9 +1,9 @@
 /* -----------------------------------------------------------------------
    sysv.S - Copyright (c) 2000 Software AG
             Copyright (c) 2008 Red Hat, Inc.
- 
+
    S390 Foreign Function Interface
- 
+
    Permission is hereby granted, free of charge, to any person obtaining
    a copy of this software and associated documentation files (the
    ``Software''), to deal in the Software without restriction, including
@@ -11,10 +11,10 @@
    distribute, sublicense, and/or sell copies of the Software, and to
    permit persons to whom the Software is furnished to do so, subject to
    the following conditions:
- 
+
    The above copyright notice and this permission notice shall be included
    in all copies or substantial portions of the Software.
- 
+
    THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
    EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
@@ -29,405 +29,296 @@
 #include <fficonfig.h>
 #include <ffi.h>
 
+	.text
+
 #ifndef __s390x__
- 
-.text
-
-	# r2:	cif->bytes
-	# r3:	&ecif
-	# r4:	ffi_prep_args
-	# r5:	ret_type
-	# r6:	ecif.rvalue
-	# ov:	fn 
- 
+
+	# r2:	frame
+	# r3:	ret_type
+	# r4:	ret_addr
+	# r5:	fun
+	# r6:	closure
+
 	# This assumes we are using gas.
+	.balign	8
 	.globl	ffi_call_SYSV
+	FFI_HIDDEN(ffi_call_SYSV)
 	.type	ffi_call_SYSV,%function
 ffi_call_SYSV:
-.LFB1:
-	stm	%r6,%r15,24(%r15)		# Save registers
-.LCFI0:
-	basr	%r13,0				# Set up base register
-.Lbase:
-	lr	%r11,%r15			# Set up frame pointer
-.LCFI1:
-	sr	%r15,%r2
-	ahi	%r15,-96-48			# Allocate stack
-	lr	%r8,%r6				# Save ecif.rvalue
-	sr	%r9,%r9
-	ic	%r9,.Ltable-.Lbase(%r13,%r5)	# Load epilog address
-	l	%r7,96(%r11)			# Load function address
-	st	%r11,0(%r15)			# Set up back chain
-	ahi	%r11,-48			# Register save area
-.LCFI2:
-
-	la	%r2,96(%r15)			# Save area
-						# r3 already holds &ecif
-	basr	%r14,%r4			# Call ffi_prep_args
-
-	lm	%r2,%r6,0(%r11)			# Load arguments
-	ld	%f0,32(%r11)
-	ld	%f2,40(%r11)
-	la	%r14,0(%r13,%r9)		# Set return address
-	br	%r7				# ... and call function
-
-.LretNone:					# Return void
-	l	%r4,48+56(%r11)
-	lm	%r6,%r15,48+24(%r11)
-	br	%r4
-
-.LretFloat:
-	l	%r4,48+56(%r11)
-	ste	%f0,0(%r8)			# Return float
-	lm	%r6,%r15,48+24(%r11)
-	br	%r4
- 
-.LretDouble:
-	l	%r4,48+56(%r11)
-	std	%f0,0(%r8)			# Return double
-	lm	%r6,%r15,48+24(%r11)
-	br	%r4
-
-.LretInt32:
-	l	%r4,48+56(%r11)
-	st	%r2,0(%r8)			# Return int
-	lm	%r6,%r15,48+24(%r11)
-	br	%r4
- 
-.LretInt64:
-	l	%r4,48+56(%r11)
-	stm	%r2,%r3,0(%r8)			# Return long long
-	lm	%r6,%r15,48+24(%r11)
-	br	%r4
- 
+	.cfi_startproc
+	st	%r6,44(%r2)			# Save registers
+	stm	%r12,%r14,48(%r2)
+	lr	%r13,%r2			# Install frame pointer
+	.cfi_rel_offset r6, 44
+	.cfi_rel_offset r12, 48
+	.cfi_rel_offset r13, 52
+	.cfi_rel_offset r14, 56
+	.cfi_def_cfa_register r13
+	st	%r2,0(%r15)			# Set up back chain
+	sla	%r3,3				# ret_type *= 8
+	lr	%r12,%r4			# Save ret_addr
+	lr	%r1,%r5				# Save fun
+	lr	%r0,%r6				# Install static chain
+
+	# Set return address, so that there is only one indirect jump.
+#ifdef HAVE_AS_S390_ZARCH
+	larl	%r14,.Ltable
+	ar	%r14,%r3
+#else
+	basr	%r14,0
+0:	la	%r14,.Ltable-0b(%r14,%r3)
+#endif
+
+	lm	%r2,%r6,8(%r13)			# Load arguments
+	ld	%f0,64(%r13)
+	ld	%f2,72(%r13)
+	br	%r1				# ... and call function
+
+	.balign	8
 .Ltable:
-	.byte	.LretNone-.Lbase		# FFI390_RET_VOID
-	.byte	.LretNone-.Lbase		# FFI390_RET_STRUCT
-	.byte	.LretFloat-.Lbase		# FFI390_RET_FLOAT
-	.byte	.LretDouble-.Lbase		# FFI390_RET_DOUBLE
-	.byte	.LretInt32-.Lbase		# FFI390_RET_INT32
-	.byte	.LretInt64-.Lbase		# FFI390_RET_INT64
+# FFI390_RET_DOUBLE
+	std	%f0,0(%r12)
+	j	.Ldone
+
+	.balign	8
+# FFI390_RET_FLOAT
+	ste	%f0,0(%r12)
+	j	.Ldone
+
+	.balign	8
+# FFI390_RET_INT64
+	st	%r3,4(%r12)
+	nop
+	# fallthru
+
+	.balign	8
+# FFI390_RET_INT32
+	st	%r2,0(%r12)
+	nop
+	# fallthru
+
+	.balign	8
+# FFI390_RET_VOID
+.Ldone:
+	l	%r14,56(%r13)
+	l	%r12,48(%r13)
+	l	%r6,44(%r13)
+	l	%r13,52(%r13)
+	.cfi_restore 14
+	.cfi_restore 13
+	.cfi_restore 12
+	.cfi_restore 6
+	.cfi_def_cfa r15, 96
+	br	%r14
+	.cfi_endproc
+	.size	 ffi_call_SYSV,.-ffi_call_SYSV
 
-.LFE1: 
-.ffi_call_SYSV_end:
-	.size	 ffi_call_SYSV,.ffi_call_SYSV_end-ffi_call_SYSV
 
+	.balign	8
+	.globl	ffi_go_closure_SYSV
+	FFI_HIDDEN(ffi_go_closure_SYSV)
+	.type	ffi_go_closure_SYSV,%function
+ffi_go_closure_SYSV:
+	.cfi_startproc
+	stm	%r2,%r6,8(%r15)			# Save arguments
+	lr	%r4,%r0				# Load closure -> user_data
+	l	%r2,4(%r4)			#   ->cif
+	l	%r3,8(%r4)			#   ->fun
+	j	.Ldoclosure
+	.cfi_endproc
 
+	.balign	8
 	.globl	ffi_closure_SYSV
+	FFI_HIDDEN(ffi_closure_SYSV)
 	.type	ffi_closure_SYSV,%function
 ffi_closure_SYSV:
-.LFB2:
+	.cfi_startproc
+	stm	%r2,%r6,8(%r15)			# Save arguments
+	lr	%r4,%r0				# Closure
+	l	%r2,16(%r4)			#   ->cif
+	l	%r3,20(%r4)			#   ->fun
+	l	%r4,24(%r4)			#   ->user_data
+.Ldoclosure:
 	stm	%r12,%r15,48(%r15)		# Save registers
-.LCFI10:
+	lr	%r12,%r15
+	.cfi_def_cfa_register r12
+	.cfi_rel_offset r6, 24
+	.cfi_rel_offset r12, 48
+	.cfi_rel_offset r13, 52
+	.cfi_rel_offset r14, 56
+	.cfi_rel_offset r15, 60
+#ifndef HAVE_AS_S390_ZARCH
 	basr	%r13,0				# Set up base register
 .Lcbase:
-	stm	%r2,%r6,8(%r15)			# Save arguments
-	std	%f0,64(%r15)
-	std	%f2,72(%r15)
-	lr	%r1,%r15			# Set up stack frame
-	ahi	%r15,-96
-.LCFI11:
-	l	%r12,.Lchelper-.Lcbase(%r13)	# Get helper function
-	lr	%r2,%r0				# Closure
-	la	%r3,8(%r1)			# GPRs
-	la	%r4,64(%r1)			# FPRs
-	la	%r5,96(%r1)			# Overflow
-	st	%r1,0(%r15)			# Set up back chain
-
-	bas	%r14,0(%r12,%r13)		# Call helper
-
-	l	%r4,96+56(%r15)
-	ld	%f0,96+64(%r15)			# Load return registers
-	lm	%r2,%r3,96+8(%r15)
-	lm	%r12,%r15,96+48(%r15)
-	br	%r4
+	l	%r1,.Lchelper-.Lcbase(%r13)	# Get helper function
+#endif
+	ahi	%r15,-96-8			# Set up stack frame
+	st	%r12,0(%r15)			# Set up back chain
+
+	std	%f0,64(%r12)			# Save fp arguments
+	std	%f2,72(%r12)
+
+	la	%r5,96(%r12)			# Overflow
+	st	%r5,96(%r15)
+	la	%r6,64(%r12)			# FPRs
+	la	%r5,8(%r12)			# GPRs
+#ifdef HAVE_AS_S390_ZARCH
+	brasl	%r14,ffi_closure_helper_SYSV
+#else
+	bas	%r14,0(%r1,%r13)		# Call helper
+#endif
 
+	lr	%r15,%r12
+	.cfi_def_cfa_register r15
+	lm	%r12,%r14,48(%r12)		# Restore saved registers
+	l	%r6,24(%r15)
+	ld	%f0,64(%r15)			# Load return registers
+	lm	%r2,%r3,8(%r15)
+	br	%r14
+	.cfi_endproc
+
+#ifndef HAVE_AS_S390_ZARCH
 	.align 4
 .Lchelper:
 	.long	ffi_closure_helper_SYSV-.Lcbase
+#endif
 
-.LFE2: 
-
-.ffi_closure_SYSV_end:
-	.size	 ffi_closure_SYSV,.ffi_closure_SYSV_end-ffi_closure_SYSV
-
-
-	.section	.eh_frame,EH_FRAME_FLAGS,@progbits
-.Lframe1:
-	.4byte	.LECIE1-.LSCIE1	# Length of Common Information Entry
-.LSCIE1:
-	.4byte	0x0	# CIE Identifier Tag
-	.byte	0x1	# CIE Version
-	.ascii "zR\0"	# CIE Augmentation
-	.uleb128 0x1	# CIE Code Alignment Factor
-	.sleb128 -4	# CIE Data Alignment Factor
-	.byte	0xe	# CIE RA Column
-	.uleb128 0x1	# Augmentation size
-	.byte	0x1b	# FDE Encoding (pcrel sdata4)
-	.byte	0xc	# DW_CFA_def_cfa
-	.uleb128 0xf
-	.uleb128 0x60
-	.align	4
-.LECIE1:
-.LSFDE1:
-	.4byte	.LEFDE1-.LASFDE1	# FDE Length
-.LASFDE1:
-	.4byte	.LASFDE1-.Lframe1	# FDE CIE offset
-	.4byte	.LFB1-.	# FDE initial location
-	.4byte	.LFE1-.LFB1	# FDE address range
-	.uleb128 0x0	# Augmentation size
-	.byte	0x4	# DW_CFA_advance_loc4
-	.4byte	.LCFI0-.LFB1
-	.byte	0x8f	# DW_CFA_offset, column 0xf
-	.uleb128 0x9
-	.byte	0x8e	# DW_CFA_offset, column 0xe
-	.uleb128 0xa
-	.byte	0x8d	# DW_CFA_offset, column 0xd
-	.uleb128 0xb
-	.byte	0x8c	# DW_CFA_offset, column 0xc
-	.uleb128 0xc
-	.byte	0x8b	# DW_CFA_offset, column 0xb
-	.uleb128 0xd
-	.byte	0x8a	# DW_CFA_offset, column 0xa
-	.uleb128 0xe
-	.byte	0x89	# DW_CFA_offset, column 0x9
-	.uleb128 0xf
-	.byte	0x88	# DW_CFA_offset, column 0x8
-	.uleb128 0x10
-	.byte	0x87	# DW_CFA_offset, column 0x7
-	.uleb128 0x11
-	.byte	0x86	# DW_CFA_offset, column 0x6
-	.uleb128 0x12
-	.byte	0x4	# DW_CFA_advance_loc4
-	.4byte	.LCFI1-.LCFI0
-	.byte	0xd	# DW_CFA_def_cfa_register
-	.uleb128 0xb
-	.byte	0x4	# DW_CFA_advance_loc4
-	.4byte	.LCFI2-.LCFI1
-	.byte	0xe	# DW_CFA_def_cfa_offset
-	.uleb128 0x90
-	.align	4
-.LEFDE1:
-.LSFDE2:
-	.4byte	.LEFDE2-.LASFDE2	# FDE Length
-.LASFDE2:
-	.4byte	.LASFDE2-.Lframe1	# FDE CIE offset
-	.4byte	.LFB2-.	# FDE initial location
-	.4byte	.LFE2-.LFB2	# FDE address range
-	.uleb128 0x0	# Augmentation size
-	.byte	0x4	# DW_CFA_advance_loc4
-	.4byte	.LCFI10-.LFB2
-	.byte	0x8f	# DW_CFA_offset, column 0xf
-	.uleb128 0x9
-	.byte	0x8e	# DW_CFA_offset, column 0xe
-	.uleb128 0xa
-	.byte	0x8d	# DW_CFA_offset, column 0xd
-	.uleb128 0xb
-	.byte	0x8c	# DW_CFA_offset, column 0xc
-	.uleb128 0xc
-	.byte	0x4	# DW_CFA_advance_loc4
-	.4byte	.LCFI11-.LCFI10
-	.byte	0xe	# DW_CFA_def_cfa_offset
-	.uleb128 0xc0
-	.align	4
-.LEFDE2:
+	.size	 ffi_closure_SYSV,.-ffi_closure_SYSV
 
 #else
- 
-.text
- 
-	# r2:	cif->bytes
-	# r3:	&ecif
-	# r4:	ffi_prep_args
-	# r5:	ret_type
-	# r6:	ecif.rvalue
-	# ov:	fn 
- 
+
+	# r2:	frame
+	# r3:	ret_type
+	# r4:	ret_addr
+	# r5:	fun
+	# r6:	closure
+
 	# This assumes we are using gas.
+	.balign	8
 	.globl	ffi_call_SYSV
+	FFI_HIDDEN(ffi_call_SYSV)
 	.type	ffi_call_SYSV,%function
 ffi_call_SYSV:
-.LFB1:
-	stmg	%r6,%r15,48(%r15)		# Save registers
-.LCFI0:
-	larl	%r13,.Lbase			# Set up base register
-	lgr	%r11,%r15			# Set up frame pointer
-.LCFI1:
-	sgr	%r15,%r2
-	aghi	%r15,-160-80			# Allocate stack
-	lgr	%r8,%r6				# Save ecif.rvalue
-	llgc	%r9,.Ltable-.Lbase(%r13,%r5)	# Load epilog address
-	lg	%r7,160(%r11)			# Load function address
-	stg	%r11,0(%r15)			# Set up back chain
-	aghi	%r11,-80			# Register save area
-.LCFI2:
-
-	la	%r2,160(%r15)			# Save area
-						# r3 already holds &ecif
-	basr	%r14,%r4			# Call ffi_prep_args
-
-	lmg	%r2,%r6,0(%r11)			# Load arguments
-	ld	%f0,48(%r11)
-	ld	%f2,56(%r11)
-	ld	%f4,64(%r11)
-	ld	%f6,72(%r11)
-	la	%r14,0(%r13,%r9)		# Set return address
-	br	%r7				# ... and call function
-
-.Lbase:
-.LretNone:					# Return void
-	lg	%r4,80+112(%r11)
-	lmg	%r6,%r15,80+48(%r11)
-	br	%r4
-
-.LretFloat:
-	lg	%r4,80+112(%r11)
-	ste	%f0,0(%r8)			# Return float
-	lmg	%r6,%r15,80+48(%r11)
-	br	%r4
- 
-.LretDouble:
-	lg	%r4,80+112(%r11)
-	std	%f0,0(%r8)			# Return double
-	lmg	%r6,%r15,80+48(%r11)
-	br	%r4
-
-.LretInt32:
-	lg	%r4,80+112(%r11)
-	st	%r2,0(%r8)			# Return int
-	lmg	%r6,%r15,80+48(%r11)
-	br	%r4
- 
-.LretInt64:
-	lg	%r4,80+112(%r11)
-	stg	%r2,0(%r8)			# Return long
-	lmg	%r6,%r15,80+48(%r11)
-	br	%r4
- 
+	.cfi_startproc
+	stg	%r6,88(%r2)			# Save registers
+	stmg	%r12,%r14,96(%r2)
+	lgr	%r13,%r2			# Install frame pointer
+	.cfi_rel_offset r6, 88
+	.cfi_rel_offset r12, 96
+	.cfi_rel_offset r13, 104
+	.cfi_rel_offset r14, 112
+	.cfi_def_cfa_register r13
+	stg	%r2,0(%r15)			# Set up back chain
+	larl	%r14,.Ltable			# Set up return address
+	slag	%r3,%r3,3			# ret_type *= 8
+	lgr	%r12,%r4			# Save ret_addr
+	lgr	%r1,%r5				# Save fun
+	lgr	%r0,%r6				# Install static chain
+	agr	%r14,%r3
+	lmg	%r2,%r6,16(%r13)		# Load arguments
+	ld	%f0,128(%r13)
+	ld	%f2,136(%r13)
+	ld	%f4,144(%r13)
+	ld	%f6,152(%r13)
+	br	%r1				# ... and call function
+
+	.balign	8
 .Ltable:
-	.byte	.LretNone-.Lbase		# FFI390_RET_VOID
-	.byte	.LretNone-.Lbase		# FFI390_RET_STRUCT
-	.byte	.LretFloat-.Lbase		# FFI390_RET_FLOAT
-	.byte	.LretDouble-.Lbase		# FFI390_RET_DOUBLE
-	.byte	.LretInt32-.Lbase		# FFI390_RET_INT32
-	.byte	.LretInt64-.Lbase		# FFI390_RET_INT64
+# FFI390_RET_DOUBLE
+	std	%f0,0(%r12)
+	j	.Ldone
+
+	.balign	8
+# FFI390_RET_DOUBLE
+	ste	%f0,0(%r12)
+	j	.Ldone
+
+	.balign	8
+# FFI390_RET_INT64
+	stg	%r2,0(%r12)
+
+	.balign	8
+# FFI390_RET_INT32
+	# Never used, as we always store type ffi_arg.
+	# But the stg above is 6 bytes and we cannot
+	# jump around this case, so fall through.
+	nop
+	nop
+
+	.balign	8
+# FFI390_RET_VOID
+.Ldone:
+	lg	%r14,112(%r13)
+	lg	%r12,96(%r13)
+	lg	%r6,88(%r13)
+	lg	%r13,104(%r13)
+	.cfi_restore r14
+	.cfi_restore r13
+	.cfi_restore r12
+	.cfi_restore r6
+	.cfi_def_cfa r15, 160
+	br	%r14
+	.cfi_endproc
+	.size	 ffi_call_SYSV,.-ffi_call_SYSV
 
-.LFE1: 
-.ffi_call_SYSV_end:
-	.size	 ffi_call_SYSV,.ffi_call_SYSV_end-ffi_call_SYSV
+
+	.balign	8
+	.globl	ffi_go_closure_SYSV
+	FFI_HIDDEN(ffi_go_closure_SYSV)
+	.type	ffi_go_closure_SYSV,%function
+ffi_go_closure_SYSV:
+	.cfi_startproc
+	stmg	%r2,%r6,16(%r15)		# Save arguments
+	lgr	%r4,%r0				# Load closure -> user_data
+	lg	%r2,8(%r4)			#   ->cif
+	lg	%r3,16(%r4)			#   ->fun
+	j	.Ldoclosure
+	.cfi_endproc
+	.size	 ffi_go_closure_SYSV,.-ffi_go_closure_SYSV
 
 
+	.balign	8
 	.globl	ffi_closure_SYSV
+	FFI_HIDDEN(ffi_closure_SYSV)
 	.type	ffi_closure_SYSV,%function
 ffi_closure_SYSV:
-.LFB2:
-	stmg	%r14,%r15,112(%r15)		# Save registers
-.LCFI10:
+	.cfi_startproc
 	stmg	%r2,%r6,16(%r15)		# Save arguments
-	std	%f0,128(%r15)
-	std	%f2,136(%r15)
-	std	%f4,144(%r15)
-	std	%f6,152(%r15)
-	lgr	%r1,%r15			# Set up stack frame
-	aghi	%r15,-160
-.LCFI11:
-	lgr	%r2,%r0				# Closure
-	la	%r3,16(%r1)			# GPRs
-	la	%r4,128(%r1)			# FPRs
-	la	%r5,160(%r1)			# Overflow
-	stg	%r1,0(%r15)			# Set up back chain
-
+	lgr	%r4,%r0				# Load closure
+	lg	%r2,32(%r4)			#   ->cif
+	lg	%r3,40(%r4)			#   ->fun
+	lg	%r4,48(%r4)			#   ->user_data
+.Ldoclosure:
+	stmg	%r13,%r15,104(%r15)		# Save registers
+	lgr	%r13,%r15
+	.cfi_def_cfa_register r13
+	.cfi_rel_offset r6, 48
+	.cfi_rel_offset r13, 104
+	.cfi_rel_offset r14, 112
+	.cfi_rel_offset r15, 120
+	aghi	%r15,-160-16			# Set up stack frame
+	stg	%r13,0(%r15)			# Set up back chain
+
+	std	%f0,128(%r13)			# Save fp arguments
+	std	%f2,136(%r13)
+	std	%f4,144(%r13)
+	std	%f6,152(%r13)
+	la	%r5,160(%r13)			# Overflow
+	stg	%r5,160(%r15)
+	la	%r6,128(%r13)			# FPRs
+	la	%r5,16(%r13)			# GPRs
 	brasl	%r14,ffi_closure_helper_SYSV	# Call helper
 
-	lg	%r14,160+112(%r15)
-	ld	%f0,160+128(%r15)		# Load return registers
-	lg	%r2,160+16(%r15)
-	la	%r15,160(%r15)
+	lgr	%r15,%r13
+	.cfi_def_cfa_register r15
+	lmg	%r13,%r14,104(%r13)		# Restore saved registers
+	lg	%r6,48(%r15)
+	ld	%f0,128(%r15)			# Load return registers
+	lg	%r2,16(%r15)
 	br	%r14
-.LFE2: 
-
-.ffi_closure_SYSV_end:
-	.size	 ffi_closure_SYSV,.ffi_closure_SYSV_end-ffi_closure_SYSV
-
-
-
-	.section	.eh_frame,EH_FRAME_FLAGS,@progbits
-.Lframe1:
-	.4byte	.LECIE1-.LSCIE1	# Length of Common Information Entry
-.LSCIE1:
-	.4byte	0x0	# CIE Identifier Tag
-	.byte	0x1	# CIE Version
-	.ascii "zR\0"	# CIE Augmentation
-	.uleb128 0x1	# CIE Code Alignment Factor
-	.sleb128 -8	# CIE Data Alignment Factor
-	.byte	0xe	# CIE RA Column
-	.uleb128 0x1	# Augmentation size
-	.byte	0x1b	# FDE Encoding (pcrel sdata4)
-	.byte	0xc	# DW_CFA_def_cfa
-	.uleb128 0xf
-	.uleb128 0xa0
-	.align	8
-.LECIE1:
-.LSFDE1:
-	.4byte	.LEFDE1-.LASFDE1	# FDE Length
-.LASFDE1:
-	.4byte	.LASFDE1-.Lframe1	# FDE CIE offset
-	.4byte	.LFB1-.	# FDE initial location
-	.4byte	.LFE1-.LFB1	# FDE address range
-	.uleb128 0x0	# Augmentation size
-	.byte	0x4	# DW_CFA_advance_loc4
-	.4byte	.LCFI0-.LFB1
-	.byte	0x8f	# DW_CFA_offset, column 0xf
-	.uleb128 0x5
-	.byte	0x8e	# DW_CFA_offset, column 0xe
-	.uleb128 0x6
-	.byte	0x8d	# DW_CFA_offset, column 0xd
-	.uleb128 0x7
-	.byte	0x8c	# DW_CFA_offset, column 0xc
-	.uleb128 0x8
-	.byte	0x8b	# DW_CFA_offset, column 0xb
-	.uleb128 0x9
-	.byte	0x8a	# DW_CFA_offset, column 0xa
-	.uleb128 0xa
-	.byte	0x89	# DW_CFA_offset, column 0x9
-	.uleb128 0xb
-	.byte	0x88	# DW_CFA_offset, column 0x8
-	.uleb128 0xc
-	.byte	0x87	# DW_CFA_offset, column 0x7
-	.uleb128 0xd
-	.byte	0x86	# DW_CFA_offset, column 0x6
-	.uleb128 0xe
-	.byte	0x4	# DW_CFA_advance_loc4
-	.4byte	.LCFI1-.LCFI0
-	.byte	0xd	# DW_CFA_def_cfa_register
-	.uleb128 0xb
-	.byte	0x4	# DW_CFA_advance_loc4
-	.4byte	.LCFI2-.LCFI1
-	.byte	0xe	# DW_CFA_def_cfa_offset
-	.uleb128 0xf0
-	.align	8
-.LEFDE1:
-.LSFDE2:
-	.4byte	.LEFDE2-.LASFDE2	# FDE Length
-.LASFDE2:
-	.4byte	.LASFDE2-.Lframe1	# FDE CIE offset
-	.4byte	.LFB2-.	# FDE initial location
-	.4byte	.LFE2-.LFB2	# FDE address range
-	.uleb128 0x0	# Augmentation size
-	.byte	0x4	# DW_CFA_advance_loc4
-	.4byte	.LCFI10-.LFB2
-	.byte	0x8f	# DW_CFA_offset, column 0xf
-	.uleb128 0x5
-	.byte	0x8e	# DW_CFA_offset, column 0xe
-	.uleb128 0x6
-	.byte	0x4	# DW_CFA_advance_loc4
-	.4byte	.LCFI11-.LCFI10
-	.byte	0xe	# DW_CFA_def_cfa_offset
-	.uleb128 0x140
-	.align	8
-.LEFDE2:
-
-#endif
+	.cfi_endproc
+	.size	 ffi_closure_SYSV,.-ffi_closure_SYSV
+#endif /* !s390x */
 
 #if defined __ELF__ && defined __linux__
 	.section	.note.GNU-stack,"",@progbits