ffi 1.0.9-x86-mingw32 → 1.0.12.pre-x86-mingw32

data/ext/ffi_c/libffi/configure.ac

@@ -2,7 +2,7 @@ dnl Process this with autoconf to create configure
 
 AC_PREREQ(2.63)
 
-AC_INIT([libffi], [3.0.9], [http://gcc.gnu.org/bugs.html])
+AC_INIT([libffi], [3.0.10], [http://sourceware.org/libffi.html])
 AC_CONFIG_HEADERS([fficonfig.h])
 
 AC_CANONICAL_SYSTEM
@@ -10,16 +10,22 @@ target_alias=${target_alias-$host_alias}
 
 . ${srcdir}/configure.host
 
+AX_ENABLE_BUILDDIR
+
 AM_INIT_AUTOMAKE
 
 # The same as in boehm-gc and libstdc++. Have to borrow it from there.
 # We must force CC to /not/ be precious variables; otherwise
 # the wrong, non-multilib-adjusted value will be used in multilibs.
 # As a side effect, we have to subst CFLAGS ourselves.
+# Also save and restore CFLAGS, since AC_PROG_CC will come up with
+# defaults of its own if none are provided.
 
 m4_rename([_AC_ARG_VAR_PRECIOUS],[real_PRECIOUS])
 m4_define([_AC_ARG_VAR_PRECIOUS],[])
+save_CFLAGS=$CFLAGS
 AC_PROG_CC
+CFLAGS=$save_CFLAGS
 m4_undefine([_AC_ARG_VAR_PRECIOUS])
 m4_rename([real_PRECIOUS],[_AC_ARG_VAR_PRECIOUS])
 
@@ -30,6 +36,12 @@ AM_PROG_CC_C_O
 AC_PROG_LIBTOOL
 AC_CONFIG_MACRO_DIR([m4])
 
+AX_CC_MAXOPT
+AX_CFLAGS_WARN_ALL
+if test "x$GCC" = "xyes"; then
+  CFLAGS="$CFLAGS -fexceptions"
+fi
+
 AM_MAINTAINER_MODE
 
 AC_CHECK_HEADERS(sys/mman.h)
@@ -43,7 +55,7 @@ TARGETDIR="unknown"
 case "$host" in
   alpha*-*-*)
 	TARGET=ALPHA; TARGETDIR=alpha;
-	# Support 128-bit long double, changable via command-line switch.
+	# Support 128-bit long double, changeable via command-line switch.
 	HAVE_LONG_DOUBLE='defined(__LONG_DOUBLE_128__)'
 	;;
 
@@ -55,6 +67,10 @@ case "$host" in
 	TARGET=X86_64; TARGETDIR=x86
   	;;
 
+  amd64-*-freebsd*)
+	TARGET=X86_64; TARGETDIR=x86
+	;;
+
   avr32*-*-*)
 	TARGET=AVR32; TARGETDIR=avr32
 	;;
@@ -67,7 +83,7 @@ case "$host" in
 	TARGET=FRV; TARGETDIR=frv
 	;;
 
-  hppa*-*-linux* | parisc*-*-linux*)
+  hppa*-*-linux* | parisc*-*-linux* | hppa*-*-openbsd*)
 	TARGET=PA_LINUX; TARGETDIR=pa
 	;;
   hppa*64-*-hpux*)
@@ -80,10 +96,17 @@ case "$host" in
   i?86-*-freebsd* | i?86-*-openbsd*)
 	TARGET=X86_FREEBSD; TARGETDIR=x86
 	;;
-  i?86-win32* | i?86-*-cygwin* | i?86-*-mingw*)
+  i?86-win32* | i?86-*-cygwin* | i?86-*-mingw* | i?86-*-os2* | i?86-*-interix*)
 	TARGET=X86_WIN32; TARGETDIR=x86
-	# All mingw/cygwin/win32 builds require this for sharedlib
-	AM_LTLDFLAGS="-no-undefined"
+	# All mingw/cygwin/win32 builds require -no-undefined for sharedlib.
+	# We must also check with_cross_host to decide if this is a native
+	# or cross-build and select where to install dlls appropriately.
+	if test -n "$with_cross_host" &&
+	   test x"$with_cross_host" != x"no"; then
+	  AM_LTLDFLAGS='-no-undefined -bindir "$(toolexeclibdir)"';
+	else
+	  AM_LTLDFLAGS='-no-undefined -bindir "$(bindir)"';
+	fi
 	;;
   i?86-*-darwin*)
 	TARGET=X86_DARWIN; TARGETDIR=x86
@@ -107,10 +130,10 @@ case "$host" in
 	TARGET=M68K; TARGETDIR=m68k
 	;;
 
-  mips-sgi-irix5.* | mips-sgi-irix6.*)
+  mips-sgi-irix5.* | mips-sgi-irix6.* | mips*-*-rtems*)
 	TARGET=MIPS; TARGETDIR=mips
 	;;
-  mips*-*-linux*)
+  mips*-*-linux* | mips*-*-openbsd*)
 	# Support 128-bit long double for NewABI.
 	HAVE_LONG_DOUBLE='defined(__mips64)'
 	TARGET=MIPS; TARGETDIR=mips
@@ -122,15 +145,18 @@ case "$host" in
   powerpc-*-beos*)
 	TARGET=POWERPC; TARGETDIR=powerpc
 	;;
-  powerpc-*-darwin*)
+  powerpc-*-darwin* | powerpc64-*-darwin*)
 	TARGET=POWERPC_DARWIN; TARGETDIR=powerpc
 	;;
   powerpc-*-aix* | rs6000-*-aix*)
 	TARGET=POWERPC_AIX; TARGETDIR=powerpc
 	;;
-  powerpc-*-freebsd*)
+  powerpc-*-freebsd* | powerpc-*-openbsd*)
 	TARGET=POWERPC_FREEBSD; TARGETDIR=powerpc
 	;;
+  powerpc64-*-freebsd*)
+	TARGET=POWERPC; TARGETDIR=powerpc
+	;;
   powerpc*-*-rtems*)
 	TARGET=POWERPC; TARGETDIR=powerpc
 	;;
@@ -181,6 +207,7 @@ AM_CONDITIONAL(ALPHA, test x$TARGET = xALPHA)
 AM_CONDITIONAL(IA64, test x$TARGET = xIA64)
 AM_CONDITIONAL(M32R, test x$TARGET = xM32R)
 AM_CONDITIONAL(M68K, test x$TARGET = xM68K)
+AM_CONDITIONAL(MOXIE, test x$TARGET = xMOXIE)
 AM_CONDITIONAL(POWERPC, test x$TARGET = xPOWERPC)
 AM_CONDITIONAL(POWERPC_AIX, test x$TARGET = xPOWERPC_AIX)
 AM_CONDITIONAL(POWERPC_DARWIN, test x$TARGET = xPOWERPC_DARWIN)
@@ -264,64 +291,124 @@ fi
 if test x$TARGET = xX86 || test x$TARGET = xX86_WIN32 || test x$TARGET = xX86_64; then
     AC_CACHE_CHECK([assembler supports pc related relocs],
 	libffi_cv_as_x86_pcrel, [
-	libffi_cv_as_x86_pcrel=yes
+	libffi_cv_as_x86_pcrel=no
 	echo '.text; foo: nop; .data; .long foo-.; .text' > conftest.s
-	if $CC $CFLAGS -c conftest.s 2>&1 | grep -i warning > /dev/null; then
-	    libffi_cv_as_x86_pcrel=no
+	if $CC $CFLAGS -c conftest.s > /dev/null; then
+	   libffi_cv_as_x86_pcrel=yes
 	fi
 	])
     if test "x$libffi_cv_as_x86_pcrel" = xyes; then
 	AC_DEFINE(HAVE_AS_X86_PCREL, 1,
 		  [Define if your assembler supports PC relative relocs.])
     fi
+
+    AC_CACHE_CHECK([assembler .ascii pseudo-op support],
+       libffi_cv_as_ascii_pseudo_op, [
+       libffi_cv_as_ascii_pseudo_op=unknown
+       # Check if we have .ascii
+       AC_TRY_COMPILE([asm (".ascii \\"string\\"");],,
+		       [libffi_cv_as_ascii_pseudo_op=yes],
+		       [libffi_cv_as_ascii_pseudo_op=no])
+    ])
+    if test "x$libffi_cv_as_ascii_pseudo_op" = xyes; then
+       AC_DEFINE(HAVE_AS_ASCII_PSEUDO_OP, 1,
+	       [Define if your assembler supports .ascii.])
+    fi
+
+    AC_CACHE_CHECK([assembler .string pseudo-op support],
+       libffi_cv_as_string_pseudo_op, [
+       libffi_cv_as_string_pseudo_op=unknown
+       # Check if we have .string
+       AC_TRY_COMPILE([asm (".string \\"string\\"");],,
+		       [libffi_cv_as_string_pseudo_op=yes],
+		       [libffi_cv_as_string_pseudo_op=no])
+    ])
+    if test "x$libffi_cv_as_string_pseudo_op" = xyes; then
+       AC_DEFINE(HAVE_AS_STRING_PSEUDO_OP, 1,
+	       [Define if your assembler supports .string.])
+    fi
+fi
+
+if test x$TARGET = xX86_WIN64; then
+    LT_SYS_SYMBOL_USCORE
+    if test "x$sys_symbol_underscore" = xyes; then
+        AC_DEFINE(SYMBOL_UNDERSCORE, 1, [Define if symbols are underscored.])
+    fi
 fi
 
+
+FFI_EXEC_TRAMPOLINE_TABLE=0
 case "$target" in
+     *arm*-apple-darwin*)
+       FFI_EXEC_TRAMPOLINE_TABLE=1
+       AC_DEFINE(FFI_EXEC_TRAMPOLINE_TABLE, 1,
+                 [Cannot use PROT_EXEC on this target, so, we revert to
+                   alternative means])
+     ;;
      *-apple-darwin10* | *-*-freebsd* | *-*-openbsd* | *-pc-solaris*)
        AC_DEFINE(FFI_MMAP_EXEC_WRIT, 1,
                  [Cannot use malloc on this target, so, we revert to
                    alternative means])
      ;;
 esac
-
-AC_CACHE_CHECK([whether .eh_frame section should be read-only],
-    libffi_cv_ro_eh_frame, [
-	libffi_cv_ro_eh_frame=no
-	echo 'extern void foo (void); void bar (void) { foo (); foo (); }' > conftest.c
-	if $CC $CFLAGS -S -fpic -fexceptions -o conftest.s conftest.c > /dev/null 2>&1; then
-	    if grep '.section.*eh_frame.*"a"' conftest.s > /dev/null; then
-		libffi_cv_ro_eh_frame=yes
-	    elif grep '.section.*eh_frame.*#alloc' conftest.c \
-		 | grep -v '#write' > /dev/null; then
-		libffi_cv_ro_eh_frame=yes
-	    fi
+AM_CONDITIONAL(FFI_EXEC_TRAMPOLINE_TABLE, test x$FFI_EXEC_TRAMPOLINE_TABLE = x1)
+AC_SUBST(FFI_EXEC_TRAMPOLINE_TABLE)
+
+if test x$TARGET = xX86_64; then
+    AC_CACHE_CHECK([assembler supports unwind section type],
+	libffi_cv_as_x86_64_unwind_section_type, [
+	libffi_cv_as_x86_64_unwind_section_type=yes
+	echo '.section .eh_frame,"a",@unwind' > conftest.s
+	if $CC $CFLAGS -c conftest.s 2>&1 | grep -i warning > /dev/null; then
+	    libffi_cv_as_x86_64_unwind_section_type=no
 	fi
-	rm -f conftest.*
-    ])
-if test "x$libffi_cv_ro_eh_frame" = xyes; then
-    AC_DEFINE(HAVE_RO_EH_FRAME, 1,
-	      [Define if .eh_frame sections should be read-only.])
-    AC_DEFINE(EH_FRAME_FLAGS, "a",
-	      [Define to the flags needed for the .section .eh_frame directive.])
-else
-    AC_DEFINE(EH_FRAME_FLAGS, "aw",
-	      [Define to the flags needed for the .section .eh_frame directive.])
+	])
+    if test "x$libffi_cv_as_x86_64_unwind_section_type" = xyes; then
+	AC_DEFINE(HAVE_AS_X86_64_UNWIND_SECTION_TYPE, 1,
+		  [Define if your assembler supports unwind section type.])
+    fi
 fi
 
-AC_CACHE_CHECK([for __attribute__((visibility("hidden")))],
-    libffi_cv_hidden_visibility_attribute, [
-	echo 'int __attribute__ ((visibility ("hidden"))) foo (void) { return 1; }' > conftest.c
-	libffi_cv_hidden_visibility_attribute=no
-	if AC_TRY_COMMAND(${CC-cc} -Werror -S conftest.c -o conftest.s 1>&AS_MESSAGE_LOG_FD); then
-	    if grep '\.hidden.*foo' conftest.s >/dev/null; then
-		libffi_cv_hidden_visibility_attribute=yes
-	    fi
-	fi
-	rm -f conftest.*
-    ])
-if test $libffi_cv_hidden_visibility_attribute = yes; then
-    AC_DEFINE(HAVE_HIDDEN_VISIBILITY_ATTRIBUTE, 1,
-	      [Define if __attribute__((visibility("hidden"))) is supported.])
+if test "x$GCC" = "xyes"; then
+  AC_CACHE_CHECK([whether .eh_frame section should be read-only],
+      libffi_cv_ro_eh_frame, [
+  	libffi_cv_ro_eh_frame=no
+  	echo 'extern void foo (void); void bar (void) { foo (); foo (); }' > conftest.c
+  	if $CC $CFLAGS -S -fpic -fexceptions -o conftest.s conftest.c > /dev/null 2>&1; then
+  	    if grep '.section.*eh_frame.*"a"' conftest.s > /dev/null; then
+  		libffi_cv_ro_eh_frame=yes
+  	    elif grep '.section.*eh_frame.*#alloc' conftest.c \
+  		 | grep -v '#write' > /dev/null; then
+  		libffi_cv_ro_eh_frame=yes
+  	    fi
+  	fi
+  	rm -f conftest.*
+      ])
+  if test "x$libffi_cv_ro_eh_frame" = xyes; then
+      AC_DEFINE(HAVE_RO_EH_FRAME, 1,
+  	      [Define if .eh_frame sections should be read-only.])
+      AC_DEFINE(EH_FRAME_FLAGS, "a",
+  	      [Define to the flags needed for the .section .eh_frame directive.  ])
+  else
+      AC_DEFINE(EH_FRAME_FLAGS, "aw",
+  	      [Define to the flags needed for the .section .eh_frame directive.  ])
+  fi
+
+  AC_CACHE_CHECK([for __attribute__((visibility("hidden")))],
+      libffi_cv_hidden_visibility_attribute, [
+  	echo 'int __attribute__ ((visibility ("hidden"))) foo (void) { return 1  ; }' > conftest.c
+  	libffi_cv_hidden_visibility_attribute=no
+  	if AC_TRY_COMMAND(${CC-cc} -Werror -S conftest.c -o conftest.s 1>&AS_MESSAGE_LOG_FD); then
+  	    if grep '\.hidden.*foo' conftest.s >/dev/null; then
+  		libffi_cv_hidden_visibility_attribute=yes
+  	    fi
+  	fi
+  	rm -f conftest.*
+      ])
+  if test $libffi_cv_hidden_visibility_attribute = yes; then
+      AC_DEFINE(HAVE_HIDDEN_VISIBILITY_ATTRIBUTE, 1,
+  	      [Define if __attribute__((visibility("hidden"))) is supported.])
+  fi
 fi
 
 AH_BOTTOM([
@@ -350,6 +437,7 @@ AC_ARG_ENABLE(debug,
   if test "$enable_debug" = "yes"; then
     AC_DEFINE(FFI_DEBUG, 1, [Define this if you want extra debugging.])
   fi)
+AM_CONDITIONAL(FFI_DEBUG, test "$enable_debug" = "yes")
 
 AC_ARG_ENABLE(structs,
 [  --disable-structs       omit code for struct support],
@@ -369,21 +457,25 @@ AC_ARG_ENABLE(purify-safety,
     AC_DEFINE(USING_PURIFY, 1, [Define this if you are using Purify and want to suppress spurious messages.])
   fi)
 
-if test -n "$with_cross_host" &&
-   test x"$with_cross_host" != x"no"; then
-  toolexecdir='$(exec_prefix)/$(target_alias)'
-  toolexeclibdir='$(toolexecdir)/lib'
-else
-  toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
-  toolexeclibdir='$(libdir)'
+# These variables are only ever used when we cross-build to X86_WIN32.
+# And we only support this with GCC, so...
+if test x"$GCC" != x"no"; then
+  if test -n "$with_cross_host" &&
+     test x"$with_cross_host" != x"no"; then
+    toolexecdir='$(exec_prefix)/$(target_alias)'
+    toolexeclibdir='$(toolexecdir)/lib'
+  else
+    toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+    toolexeclibdir='$(libdir)'
+  fi
+  multi_os_directory=`$CC -print-multi-os-directory`
+  case $multi_os_directory in
+    .) ;; # Avoid trailing /.
+    *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
+  esac
+  AC_SUBST(toolexecdir)
+  AC_SUBST(toolexeclibdir)
 fi
-multi_os_directory=`$CC -print-multi-os-directory`
-case $multi_os_directory in
-  .) ;; # Avoid trailing /.
-  *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
-esac
-AC_SUBST(toolexecdir)
-AC_SUBST(toolexeclibdir)
 
 if test "${multilib}" = "yes"; then
   multilib_arg="--enable-multilib"

data/ext/ffi_c/libffi/depcomp

@@ -1,10 +1,10 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2006-10-15.18
+scriptversion=2009-04-28.21; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
-# Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -17,9 +17,7 @@ scriptversion=2006-10-15.18
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -87,6 +85,15 @@ if test "$depmode" = dashXmstdout; then
    depmode=dashmstdout
 fi
 
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+   # This is just like msvisualcpp but w/o cygpath translation.
+   # Just convert the backslash-escaped backslashes to single forward
+   # slashes to satisfy depend.m4
+   cygpath_u="sed s,\\\\\\\\,/,g"
+   depmode=msvisualcpp
+fi
+
 case "$depmode" in
 gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
@@ -192,14 +199,14 @@ sgi)
 ' < "$tmpdepfile" \
     | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
     tr '
-' ' ' >> $depfile
-    echo >> $depfile
+' ' ' >> "$depfile"
+    echo >> "$depfile"
 
     # The second pass generates a dummy entry for each header file.
     tr ' ' '
 ' < "$tmpdepfile" \
    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
+   >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -215,34 +222,39 @@ aix)
   # current directory.  Also, the AIX compiler puts `$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
     "$@" -Wc,-M
   else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
     "$@" -M
   fi
   stat=$?
 
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
   if test $stat -eq 0; then :
   else
-    rm -f "$tmpdepfile"
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
 
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
   if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
     # Each line is of the form `foo.o: dependent.h'.
     # Do two passes, one to just change these to
     # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -323,7 +335,12 @@ hp2)
   if test -f "$tmpdepfile"; then
     sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
     # Add `dependent.h:' lines.
-    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+    sed -ne '2,${
+	       s/^ *//
+	       s/ \\*$//
+	       s/$/:/
+	       p
+	     }' "$tmpdepfile" >> "$depfile"
   else
     echo "#dummy" > "$depfile"
   fi
@@ -399,7 +416,7 @@ dashmstdout)
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
@@ -450,32 +467,39 @@ makedepend)
   "$@" || exit $?
   # Remove any Libtool call
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
   fi
   # X makedepend
   shift
-  cleared=no
-  for arg in "$@"; do
+  cleared=no eat=no
+  for arg
+  do
     case $cleared in
     no)
       set ""; shift
       cleared=yes ;;
     esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
     case "$arg" in
     -D*|-I*)
       set fnord "$@" "$arg"; shift ;;
     # Strip any option that makedepend may not understand.  Remove
     # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
     -*|$object)
       ;;
     *)
       set fnord "$@" "$arg"; shift ;;
     esac
   done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
   touch "$tmpdepfile"
   ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
   rm -f "$depfile"
@@ -495,7 +519,7 @@ cpp)
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
@@ -533,13 +557,27 @@ cpp)
 
 msvisualcpp)
   # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
+  # always write the preprocessed file to stdout.
   "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
   IFS=" "
   for arg
   do
     case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
     "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
 	set fnord "$@"
 	shift
@@ -552,16 +590,23 @@ msvisualcpp)
 	;;
     esac
   done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
   echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
 none)
   exec "$@"
   ;;
@@ -580,5 +625,6 @@ exit 0
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End: