ffi-libfuse 0.0.1.rctest12 → 0.3.3

data/lib/ffi/libfuse/fuse_conn_info.rb

@@ -2,62 +2,60 @@
 
 require_relative 'fuse_version'
 require_relative '../accessors'
+require_relative '../boolean_int'
 
 module FFI
   # Ruby FFI Binding for [libfuse](https://github.com/libfuse/libfuse)
   module Libfuse
-    # These are constants in fuse_common.h but defined like bitmask
-    #
-    #  FUSE_CAP_ASYNC_READ: filesystem supports asynchronous read requests
-    #  FUSE_CAP_POSIX_LOCKS: filesystem supports "remote" locking
-    #  FUSE_CAP_ATOMIC_O_TRUNC: filesystem handles the O_TRUNC open flag
-    #  FUSE_CAP_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
-    #  FUSE_CAP_BIG_WRITES: filesystem can handle write size larger than 4kB
-    #  FUSE_CAP_DONT_MASK: don't apply umask to file mode on create operations
-    #  FUSE_CAP_SPLICE_WRITE: ability to use splice() to write to the fuse device
-    #  FUSE_CAP_SPLICE_MOVE: ability to move data to the fuse device with splice()
-    #  FUSE_CAP_SPLICE_READ: ability to use splice() to read from the fuse device
-    #  FUSE_CAP_FLOCK_LOCKS: ?
-    #  FUSE_CAP_IOCTL_DIR: ioctl support on directories
-
-    #  FUSE_IOCTL_COMPAT: 32bit compat ioctl on 64bit machine
-    #  FUSE_IOCTL_UNRESTRICTED: not restricted to well-formed ioctls, retry allowed
-    #  FUSE_IOCTL_RETRY: retry with new iovecs
-    #  FUSE_IOCTL_DIR: is a directory
-    bitmask :fuse_ioctl, %i[compat unrestricted retry dir]
-
-    # #define FUSE_CAP_ASYNC_READ	(1 << 0)
-    # #define FUSE_CAP_POSIX_LOCKS	(1 << 1)
-    # #define FUSE_CAP_ATOMIC_O_TRUNC	(1 << 3)
-    # #define FUSE_CAP_EXPORT_SUPPORT	(1 << 4)
-    # #define FUSE_CAP_BIG_WRITES	(1 << 5)
-    # #define FUSE_CAP_DONT_MASK	(1 << 6)
-    # #define FUSE_CAP_SPLICE_WRITE	(1 << 7)
-    # #define FUSE_CAP_SPLICE_MOVE	(1 << 8)
-    # #define FUSE_CAP_SPLICE_READ	(1 << 9)
-    # #define FUSE_CAP_FLOCK_LOCKS	(1 << 10)
-    # #define FUSE_CAP_IOCTL_DIR	(1 << 11)
-
-    if FUSE_MAJOR_VERSION >= 3
-      bitmask :fuse_cap, %i[
-        async_read posix_locks atomic_o_trunc export_support
-        big_writes dont_mask splice_write splice_move splice_read
-        flock_locks ioctl_dir
-      ]
-    else
-      bitmask :fuse_cap, %i[
-        async_read posix_locks atomic_o_trunc export_support
-        dont_mask splice_write splice_move splice_read flock_locks ioctl_dir
-        auto_inval_data readdirplus readdirplus_auto async_dio writeback_cache no_open_support
-        parallel_dirops posix_acl handle_killpriv explicit_inval_data
-      ]
-    end
+    capabilities =
+      if FUSE_MAJOR_VERSION >= 3
+        %i[
+          async_read
+          posix_locks
+          atomic_o_trunc
+          export_support
+          dont_mask
+          splice_write
+          splice_move
+          splice_read
+          flock_locks
+          ioctl_dir
+          auto_inval_data
+          readdirplus
+          readdirplus_auto
+          async_dio
+          writeback_cache
+          no_open_support
+          parallel_dirops
+          posix_acl
+          handle_killpriv
+          cache_symlinks
+          no_opendir_support
+          explicit_inval_data
+        ]
+      else
+        %i[
+          async_readcap
+          posix_locks
+          atomic_o_trunc
+          export_support
+          big_writes
+          dont_mask
+          splice_write
+          splice_move
+          splice_read
+          flock_locks
+          ioctl_dir
+        ]
+      end
+
+    bitmask :fuse_cap, capabilities
+
     #
     # Connection information
     #
-    # Some of the elements are read-write, these can be changed to
-    # indicate the value requested by the filesystem.  The requested
-    # value must usually be smaller than the indicated value.
+    # Some of the elements are read-write, these can be changed to indicate the value requested by the filesystem.  The
+    # requested value must usually be smaller than the indicated value.
     #
     # @see FuseOperations#init
     class FuseConnInfo < FFI::Struct
@@ -69,81 +67,18 @@ module FFI
             max_write: :uint,
             max_read: :uint,
             max_readahead: :uint,
-            #
-            # Capability flags that the kernel supports (read-only)
-            #
             capable: :fuse_cap,
-            #
-            # Capability flags that the filesystem wants to enable.
-            #
-            # libfuse attempts to initialize this field with
-            # reasonable default values before calling the init() handler.
-            #
             want: :fuse_cap,
-            #
-            # Maximum number of pending "background" requests. A
-            # background request is any type of request for which the
-            # total number is not limited by other means. As of kernel
-            # 4.8, only two types of requests fall into this category:
-            #
-            #   1. Read-ahead requests
-            #   2. Asynchronous direct I/O requests
-            #
-            # Read-ahead requests are generated (if max_readahead is
-            # non-zero) by the kernel to preemptively fill its caches
-            # when it anticipates that userspace will soon read more
-            # data.
-            #
-            # Asynchronous direct I/O requests are generated if
-            # FUSE_CAP_ASYNC_DIO is enabled and userspace submits a large
-            # direct I/O request. In this case the kernel will internally
-            # split it up into multiple smaller requests and submit them
-            # to the filesystem concurrently.
-            #
-            # Note that the following requests are *not* background
-            # requests: writeback requests (limited by the kernel's
-            # flusher algorithm), regular (i.e., synchronous and
-            # buffered) userspace read/write requests (limited to one per
-            # thread), asynchronous read requests (Linux's io_submit(2)
-            # call actually blocks, so these are also limited to one per
-            # thread).
-            #
             max_background: :uint,
-            #
-            # Kernel congestion threshold parameter. If the number of pending
-            # background requests exceeds this number, the FUSE kernel module will
-            # mark the filesystem as "congested". This instructs the kernel to
-            # expect that queued requests will take some time to complete, and to
-            # adjust its algorithms accordingly (e.g. by putting a waiting thread
-            # to sleep instead of using a busy-loop).
-            #
             congestion_threshold: :uint,
-            #
-            # When FUSE_CAP_WRITEBACK_CACHE is enabled, the kernel is responsible
-            # for updating mtime and ctime when write requests are received. The
-            # updated values are passed to the filesystem with setattr() requests.
-            # However, if the filesystem does not support the full resolution of
-            # the kernel timestamps (nanoseconds), the mtime and ctime values used
-            # by kernel and filesystem will differ (and result in an apparent
-            # change of times after a cache flush).
-            #
-            # To prevent this problem, this variable can be used to inform the
-            # kernel about the timestamp granularity supported by the file-system.
-            # The value should be power of 10.  The default is 1, i.e. full
-            # nano-second resolution. Filesystems supporting only second resolution
-            # should set this to 1000000000.
-            #
             time_gran: :uint,
-            #
-            # For future use.
-            #
-            reserved: [:uint, 22]
+            reserved: [:uint, 22] # for future use
           }
         else
           {
             proto_major: :uint,
             proto_minor: :uint,
-            async_read: :uint, # This slot is max_read in Fuse 3
+            async_read: :bool_int, # long deprecated
             max_write: :uint,
             max_readahead: :uint,
             capable: :fuse_cap,
@@ -159,25 +94,23 @@ module FFI
       layout fuse_layout
 
       # @!attribute [r] proto_major
-      #  @return [Integer] Major version of the protocol (read-only)
+      # @return [Integer] Major version of the protocol (read-only)
 
       # @!attribute [r] proto_minor
-      #  @return [Integer] Minor version of the protocol (read-only)
+      # @return [Integer] Minor version of the protocol (read-only)
 
       ffi_attr_reader :proto_major, :proto_minor
 
-      #  Is asynchronous read supported (read-write)
-      ffi_attr_accessor :async_read if FUSE_MAJOR_VERSION < 3
-
       # @!attribute [rw] max_read
-      #  @return [Integer] Maximum size of read requests.
+      # @return [Integer] Maximum size of read requests.
       #
-      #   A value of zero indicates no limit. However, even if the filesystem does not specify a limit, the maximum size
-      #   of read requests will still be limited by the kernel.
+      # A value of zero indicates no limit. However, even if the filesystem does not specify a limit, the maximum size
+      # of read requests will still be limited by the kernel.
       #
-      #  @note For the time being, the maximum size of read requests must be set both here *and* passed to
-      #  using the ``-o max_read=<n>`` mount option. At some point in the future, specifying the mount
-      #  option will no longer be necessary.
+      # @note For the time being, the maximum size of read requests must be set both here *and* passed to
+      # using the ``-o max_read=<n>`` mount option. At some point in the future, specifying the mount
+      # option will no longer be necessary.
+      # @since Fuse3
       ffi_attr_accessor :max_read if FUSE_MAJOR_VERSION >= 3
 
       # @!attribute [rw] max_write
@@ -188,23 +121,266 @@ module FFI
 
       ffi_attr_accessor :max_write, :max_readahead
 
-      # Capability flags that kernel supports
+      # @!attribute [r] capable
+      # Capability flags supported by kernel fuse module
+      #
+      #  * `:async_read` Indicates that the filesystem supports asynchronous read requests.
+      #
+      #  If this capability is not requested/available, the kernel will ensure that there is at most one pending read
+      #  request per file-handle at any time, and will attempt to order read requests by increasing offset.
+      #
+      #  This feature is enabled by default when supported by the kernel.
+      #
+      #  * `:posix_locks`  Indicates that the filesystem supports "remote" locking.
+      #
+      #  This feature is enabled by default when supported by the kernel,
+      #  and if getlk() and setlk() handlers are implemented.
+      #
+      #  * `:atomic_o_trunc` Indicates that the filesystem supports the O_TRUNC open flag.
+      #
+      #  If disabled, and an application specifies O_TRUNC, fuse first calls truncate() and then open() with O_TRUNC
+      #  filtered out.
+      #
+      #  This feature is enabled by default when supported by the kernel.
+      #
+      #  * `:export_support` Indicates that the filesystem supports lookups of "." and "..".
+      #
+      #  This feature is disabled by default.
+      #
+      #  * `:big_writes` Indicates the filesystem can handle write size larger than 4kB.
+      #
+      #   Removed in Fuse3 where is now always active. Filesystems that want to limit the size of write requests should
+      #   use the {#max_write} option instead.
+      #
+      #  * `:dont_mask` Indicates that the kernel should not apply the umask to the file mode on create operations.
+      #
+      #  This feature is disabled by default.
+      #
+      #  * `:splice_write` Indicates that libfuse should try to use splice() when writing to the fuse device.
+      #
+      #  This may improve performance. This feature is disabled by default.
+      #
+      #  * `:splice_move` Indicates that libfuse should try to move pages instead of copying when writing to / reading
+      #    from the fuse device.
+      #
+      #  This may improve performance. This feature is disabled by default.
+      #
+      #  * `:splice_read` Indicates that libfuse should try to use splice() when reading from the fuse device.
+      #
+      #  This may improve performance. This feature is enabled by default when supported by the kernel and
+      #  if the filesystem implements a write_buf() handler.
+      #
+      #  * `:flock_locks` If set, the calls to flock(2) will be emulated using POSIX locks and must then be handled by
+      #  the filesystem's :flock handler.
+      #
+      #  If not set, flock(2) calls will be handled by the FUSE kernel module internally (so any access that does not go
+      #  through the kernel cannot be taken into account).
+      #
+      #  This feature is enabled by default when supported by the kernel and if the filesystem implements a flock()
+      #  handler.
+      #
+      #  * `:ioctl_dir` Indicates that the filesystem supports ioctl's on directories.
+      #
+      #  This feature is enabled by default when supported by the kernel.
+      #
+      # * :`auto_inval_data`
+      #
+      #  Traditionally, while a file is open the FUSE kernel module only asks the filesystem for an update of the file's
+      #  attributes when a client attempts to read beyond EOF. This is unsuitable for e.g. network filesystems, where
+      #  the file contents may change without the kernel knowing about it.
+      #
+      #  If this flag is set, FUSE will check the validity of the attributes on every read. If the attributes are no
+      #  longer valid (i.e., if the *attr_timeout* passed to fuse_reply_attr() or set in `struct fuse_entry_param` has
+      #  passed), it will first issue a `getattr` request. If the new mtime differs from the previous value, any cached
+      #  file *contents* will be invalidated as well.
+      #
+      #  This flag should always be set when available. If all file changes go through the kernel, *attr_timeout* should
+      #  be set to a very large number to avoid unnecessary getattr() calls.
+      #
+      #  This feature is enabled by default when supported by the kernel.
+      #
+      #  * `:readdirplus` Indicates that the filesystem supports readdirplus.
+      #
+      #  This feature is enabled by default when supported by the kernel and if the filesystem implements the
+      #  readdirplus() handler
+      #
+      #  * `:readdirplus_auto` Indicates that the filesystem supports adaptive readdirplus.
+      #
+      #  If :readdirplus is not set, this flag has no effect.
+      #
+      #  If :readdirplus is set and this flag is not set, the kernel will always issue readdirplus() requests to
+      #  retrieve directory contents.
+      #
+      #  If :readdirplus is set and this flag is set, the kernel will issue both readdir() and readdirplus() requests,
+      #  depending on how much information is expected to be required.
+      #
+      #  As of Linux 4.20, the algorithm is as follows: when userspace starts to read directory entries, issue a
+      #  :reaadirplus request to the filesystem. If any entry attributes have been looked up by the time userspace
+      #  requests the next batch of entries continue with :reaadirplus, otherwise switch to plain :readdir.  This will
+      #  result in eg plain "ls" triggering :reaadirplus first then :readdir after that because it doesn't do lookups.
+      #  "ls -l" should result in all :reaadirplus, except if dentries are already cached.
+      #
+      #  This feature is enabled by default when supported by the kernel and if the filesystem implements both a
+      #  readdirplus() and a readdir() handler.
+      #
+      #  **Note** The high-level operations mix :readdir and :readdirplus into one operation
+      #  with flags to indicate behaviour. As such for the purposes of above :readdirplus is always implemented!
+      #
+      #  * `:async_dio` Indicates that the filesystem supports asynchronous direct I/O submission.
+      #
+      #   If this capability is not requested/available, the kernel will ensure that there is at most one pending read
+      #   and one pending write request per direct I/O file-handle at any time.
+      #
+      #   This feature is enabled by default when supported by the kernel.
+      #
+      #  * `:writeback_cache` Indicates that writeback caching should be enabled.
+      #
+      #   This means that individual write request may be buffered and merged in the kernel before they are send to the
+      #   filesystem.
+      #
+      #   This feature is disabled by default.
+      #
+      #  * `:no_open_support` Indicates support for zero-message opens.
+      #
+      #   If this flag is set in the `capable` field of the `fuse_conn_info` structure, then the filesystem may return
+      #  `ENOSYS` from the open() handler to indicate success. Further attempts to open files will be handled in the
+      #   kernel. (If this flag is not set, returning ENOSYS will be treated as an error and signaled to the caller).
+      #
+      #   Setting (or unsetting) this flag in the `want` field has *no effect*.
+      #
+      #  * `:parallel_dirops` Indicates support for parallel directory operations.
+      #
+      #  If this flag is unset, the FUSE kernel module will ensure that lookup() and readdir() requests are never issued
+      #  concurrently for the same directory.
+      #
+      #  This feature is enabled by default when supported by the kernel.
+      #
+      #  * `:posix_acl` Indicates support for POSIX ACLs.
+      #
+      #  If this feature is enabled, the kernel will cache and have responsibility for enforcing ACLs. ACL will be
+      #  stored as xattrs and passed to userspace, which is responsible for updating the ACLs in the filesystem, keeping
+      #  the file mode in sync with the ACL, and ensuring inheritance of default ACLs when new filesystem nodes are
+      #  created. Note that this requires that the file system is able to parse and interpret the xattr representation
+      #  of ACLs.
+      #
+      #  Enabling this feature implicitly turns on the ``default_permissions`` mount option (even if it was not passed
+      #  to mount(2)).
+      #
+      #  This feature is disabled by default.
+      #
+      #  * `:handle_killpriv` Indicates that the filesystem is responsible for unsetting setuid and setgid bits when a
+      #  file is written, truncated, or its owner is changed.
+      #
+      #  This feature is enabled by default when supported by the kernel.
+      #
+      #  * `:cache_symlinks` Indicates that the kernel supports caching symlinks in its page cache.
+      #
+      #  When this feature is enabled, symlink targets are saved in the page cache. You can invalidate a cached link by
+      #  calling: `fuse_lowlevel_notify_inval_inode(se, ino, 0, 0);`
+      #
+      #  This feature is disabled by default.
+      #
+      #  * `:no_opendir_support` Indicates support for zero-message opendirs.
+      #
+      #  If this flag is set then the filesystem may return `ENOSYS` from the opendir() handler to indicate success.
+      #  Further opendir and releasedir messages will be handled in the kernel. (If this flag is not set, returning
+      #  ENOSYS will be treated as an error and signalled to the caller.)
+      #
+      #  Setting (or unsetting) this flag in the `want` field has *no effect*.
+      #
+      #  * `:explicit_inval_data` Indicates support for invalidating cached pages only on explicit request.
+      #
+      #  If this flag is set in the `capable` field of the `fuse_conn_info` structure, then the FUSE kernel module
+      #  supports invalidating cached pages only on explicit request by the filesystem through
+      #  fuse_lowlevel_notify_inval_inode() or fuse_invalidate_path().
+      #
+      #  By setting this flag in the `want` field of the `fuse_conn_info` structure, the filesystem is responsible for
+      #  invalidating cached pages through explicit requests to the kernel.
+      #
+      #  Note that setting this flag does not prevent the cached pages from being flushed by OS itself and/or through
+      #  user actions.
+      #
+      #  Note that if both :explicit_inval_data and :auto_inval_data are set then :auto_inval_data takes precedence.
+      #
+      #  This feature is disabled by default.
+      # @return [Array<Symbol>]
       ffi_attr_reader :capable
 
-      # Is capable of all of these FUSE_CAPs
-      def capable?(*of)
-        of.all? { |c| self[:capable].include?(c) }
+      # @param [Array<Symbol>] capabilities
+      # @return [Boolean] true if {#capable} of all capabilities
+      def capable?(*capabilities)
+        capabilities.all? { |c| self[:capable].include?(c) }
+      end
+
+      # @attribute [rw] want
+      # @overload want()
+      #  Capability flags that the filesystem wants to enable.
+      #
+      #  libfuse attempts to initialize this field with reasonable default values before calling the :init handler.
+      #
+      # @overload want(*capabiities)
+      #  Add to the capabilities wanted by the filesystem
+      #  @param [Array<Symbol>] capabilities list to add
+      # @overload want(**capabilities)
+      #  @param [Hash<Symbol,Boolean>] capabilities map of capability names to whether they are explicitly wanted
+      #   or unwanted
+      # @return [Array<Symbol>]
+      # @see capable
+      ffi_attr_reader(:want, simple: false) do |*caps, **h|
+        next self[:want] if caps.empty? && h.empty?
+
+        h.merge!(caps.pop) if caps.last.is_a?(Hash)
+        add, del = h.keys.partition { |c| h[c] }
+        self[:want] = (self[:want] - del + add + caps)
       end
 
-      # Capability flags that the filesystem wants
-      ffi_attr_accessor :want
+      # @param [Array<Symbol>] capabilities
+      # @return [Boolean] true if all capabilities are wanted
+      def wanted?(*capabilities)
+        capabilities.all? { |c| self[:want].include?(c) }
+      end
 
-      # Maximum number of backgrounded requests
+      # @!attribute [rw] max_background
+      # @return [Integer] Maximum number of pending "background" requests.
+      #
+      # A background request is any type of request for which the total number is not limited by other means. As of
+      # kernel 4.8, only two types of requests fall into this category:
+      #
+      #   1. Read-ahead requests
+      #   2. Asynchronous direct I/O requests
+      #
+      # Read-ahead requests are generated (if max_readahead is non-zero) by the kernel to preemptively fill its
+      # caches when it anticipates that userspace will soon read more data.
+      #
+      # Asynchronous direct I/O requests are generated if :async_dio is enabled and userspace submits a large
+      # direct I/O request. In this case the kernel will internally split it up into multiple smaller requests and
+      # submit them to the filesystem concurrently.
+      #
+      # Note that the following requests are *not* background requests: writeback requests (limited by the kernel's
+      # flusher algorithm), regular (i.e., synchronous and buffered) userspace read/write requests (limited to one per
+      # thread), asynchronous read requests (Linux's io_submit(2) call actually blocks, so these are also limited to one
+      # per thread).
       ffi_attr_accessor :max_background
 
-      # Kernel congestion threshold parameter
-      ffi_attr_reader :congestion_threshold
+      # @!attribute [rw] congestion_threshold
+      # @return [Integer] Kernel congestion threshold parameter
+      #
+      # f the number of pending background requests exceeds this number, the FUSE kernel module will mark the filesystem
+      # as "congested". This instructs the kernel to expect that queued requests will take some time to complete, and to
+      # adjust its algorithms accordingly (e.g. by putting a waiting thread to sleep instead of using a busy-loop).
+      ffi_attr_accessor :congestion_threshold
 
+      # @!attribute [rw] time_gran
+      # @return [Integer] timestamp granularity supported by the file-system
+      #
+      # When :writeback_cache is enabled, the kernel is responsible for updating mtime and ctime when write requests are
+      # received. The updated values are passed to the filesystem with setattr() requests. However, if the filesystem
+      # does not support the full resolution of the kernel timestamps (nanoseconds), the mtime and ctime values used by
+      # kernel and filesystem will differ (and result in an apparent change of times after a cache flush).
+      #
+      # To prevent this problem, this variable can be used to inform the kernel about the timestamp granularity
+      # supported by the file-system. The value should be power of 10.  The default is 1, i.e. full nano-second
+      # resolution. Filesystems supporting only second resolution should set this to 1000000000.
       ffi_attr_accessor :time_gran if FUSE_MAJOR_VERSION >= 3
     end
   end

data/lib/ffi/libfuse/fuse_context.rb

@@ -15,9 +15,20 @@ module FFI
       base[:umask] = :mode_t if FUSE_VERSION >= 28
       layout base
 
-      ffi_attr_reader(:uid, :gid, :pid, :mode, :private_data)
+      ffi_attr_reader(*members, simple: false) do
+        m = __method__
 
-      ffi_attr_reader(:umask) if FUSE_VERSION >= 28
+        # Use overrides if they are available, or the default context if the underlying memory is invalid
+        FuseContext.overrides[m] || (null? ? DEFAULT_CONTEXT[m] : self[m])
+      end
+
+      if FUSE_VERSION < 28
+        attr_writer :umask
+
+        def umask
+          @umask ||= File.umask
+        end
+      end
 
       # @!attribute [r] uid
       #   @return [Integer] user id of the calling process
@@ -32,7 +43,9 @@ module FFI
       #  @return [Object] private filesystem data
       #  @see FuseOperations#init
 
-      # @!attribute [r] umask
+      # @!attribute [rw] umask
+      #
+      #  Writable only for Fuse version < 28
       #  @return [Integer] umask of the calling process
 
       # @return [Boolean]
@@ -48,8 +61,37 @@ module FFI
         Libfuse.raise_interrupt
       end
 
+      # @param [Integer] perms
+      # @return perms adjusted by {#umask}
+      def mask(perms)
+        perms & ~umask
+      end
+
+      DEFAULT_CONTEXT = { uid: Process.uid, gid: Process.gid, umask: File.umask }.freeze
+
       class << self
+        # @overload overrides(hash)
+        #  @param[Hash<Symbol,Object|nil] hash a list of override values that will apply to this context
+        #
+        #    If not set uid, gid, umask will be overridden from the current process, which is useful if
+        #    {FuseContext} is referenced from outside of a fuse callback
+        #  @yield [] executes block with the given hash overriding FuseContext values
+        #  @return [Object] the result of the block
+        # @overload overrides()
+        #   @return [Hash] current thread local overrides for FuseContext
+        def overrides(hash = nil)
+          return Thread.current[:fuse_context_overrides] ||= {} unless block_given?
+
+          begin
+            Thread.current[:fuse_context_overrides] = hash || DEFAULT_CONTEXT
+            yield
+          ensure
+            Thread.current[:fuse_context_overrides] = nil
+          end
+        end
+
         # @return [FuseContext] the context for the current filesystem operation
+        # @note if called outside a fuse callback the native {FuseContext} will have invalid values. See {overrides}
         def fuse_get_context
           Libfuse.fuse_get_context
         end