falkorlib 0.8.9 → 0.9.0

data/templates/latex/article-ieee/main.tex.erb

@@ -1,9 +1,9 @@
 % =============================================================================
 % File:  <%= config[:name] %>.tex --
 % Author(s): <%= config[:author] %> (<%= config[:mail] %>)
-% Time-stamp: <Thu 2016-11-10 00:34 svarrette>
+% Time-stamp: <Wed 2022-08-17 10:38 svarrette>
 %
-% Copyright (c) <%= Time.now.year %> <%= config[:author] %><Sebastien.Varrette@uni.lu>
+% Copyright (c) <%= Time.now.year %> <%= config[:author] %> 
 %
 % For more information:
 % - LaTeX: http://www.latex-project.org/
@@ -11,388 +11,56 @@
 % - LaTeX symbol list:
 % http://www.ctan.org/tex-archive/info/symbols/comprehensive/symbols-a4.pdf
 % =============================================================================
-% /!\ WARNING: inspired from bare_conf_compsoc.tex
 % See http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran
-%
-% =============================================================================
-%% V1.4b
-%% 2015/08/26
-%% by Michael Shell
-%% See:
-%% http://www.michaelshell.org/
-%% for current contact information.
-%%
-%% This is a skeleton file demonstrating the use of IEEEtran.cls
-%% (requires IEEEtran.cls version 1.8b or later) with an IEEE Computer
-%% Society conference paper.
-%%
-%% Support sites:
-%% http://www.michaelshell.org/tex/ieeetran/
-%% http://www.ctan.org/pkg/ieeetran
-%% and
-%% http://www.ieee.org/
-
-%%*************************************************************************
-%% Legal Notice:
-%% This code is offered as-is without any warranty either expressed or
-%% implied; without even the implied warranty of MERCHANTABILITY or
-%% FITNESS FOR A PARTICULAR PURPOSE!
-%% User assumes all risk.
-%% In no event shall the IEEE or any contributor to this code be liable for
-%% any damages or losses, including, but not limited to, incidental,
-%% consequential, or any other damages, resulting from the use or misuse
-%% of any information contained here.
-%%
-%% All comments are the opinions of their respective authors and are not
-%% necessarily endorsed by the IEEE.
-%%
-%% This work is distributed under the LaTeX Project Public License (LPPL)
-%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used,
-%% distributed and modified. A copy of the LPPL, version 1.3, is included
-%% in the base LaTeX documentation of all distributions of LaTeX released
-%% 2003/12/01 or later.
-%% Retain all contribution notices and credits.
-%% ** Modified files should be clearly indicated as such, including  **
-%% ** renaming them and changing author support contact information. **
-%%*************************************************************************
-
+% See also https://github.com/latextemplates/IEEE
 
-% *** Authors should verify (and, if needed, correct) their LaTeX system  ***
-% *** with the testflow diagnostic prior to trusting their LaTeX platform ***
-% *** with production work. The IEEE's font choices and paper sizes can   ***
-% *** trigger bugs that do not appear when using other class files.       ***                          ***
-% The testflow support page is at:
-% http://www.michaelshell.org/tex/testflow/
-
-
-
-\documentclass[conference,compsoc]{IEEEtran}
-% Some/most Computer Society conferences require the compsoc mode option,
-% but others may want the standard conference format.
-%
-% If IEEEtran.cls has not been installed into the LaTeX system files,
-% manually specify the path to it like:
-% \documentclass[conference,compsoc]{../sty/IEEEtran}
+\documentclass[conference,a4paper]{IEEEtran}
+\IEEEoverridecommandlockouts
 
 \usepackage{_style}
-
-% Some very useful LaTeX packages include:
-% (uncomment the ones you want to load)
-
-
-% *** MISC UTILITY PACKAGES ***
-%
-%\usepackage{ifpdf}
-% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional
-% compilation based on whether the output is pdf or dvi.
-% usage:
-% \ifpdf
-%   % pdf code
-% \else
-%   % dvi code
-% \fi
-% The latest version of ifpdf.sty can be obtained from:
-% http://www.ctan.org/pkg/ifpdf
-% Also, note that IEEEtran.cls V1.7 and later provides a builtin
-% \ifCLASSINFOpdf conditional that works the same way.
-% When switching from latex to pdflatex and vice-versa, the compiler may
-% have to be run twice to clear warning/error messages.
-
-
-
-
-
-
-% *** CITATION PACKAGES ***
-%
-\ifCLASSOPTIONcompsoc
-  % IEEE Computer Society needs nocompress option
-  % requires cite.sty v4.0 or later (November 2003)
-  \usepackage[nocompress]{cite}
-\else
-  % normal IEEE
-  \usepackage{cite}
-\fi
-% cite.sty was written by Donald Arseneau
-% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package
-% \cite{} output to follow that of the IEEE. Loading the cite package will
-% result in citation numbers being automatically sorted and properly
-% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using
-% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's
-% \cite will automatically add leading space, if needed. Use cite.sty's
-% noadjust option (cite.sty V3.8 and later) if you want to turn this off
-% such as if a citation ever needs to be enclosed in parenthesis.
-% cite.sty is already installed on most LaTeX systems. Be sure and use
-% version 5.0 (2009-03-20) and later if using hyperref.sty.
-% The latest version can be obtained at:
-% http://www.ctan.org/pkg/cite
-% The documentation is contained in the cite.sty file itself.
-%
-% Note that some packages require special options to format as the Computer
-% Society requires. In particular, Computer Society  papers do not use
-% compressed citation ranges as is done in typical IEEE papers
-% (e.g., [1]-[4]). Instead, they list every citation separately in order
-% (e.g., [1], [2], [3], [4]). To get the latter we need to load the cite
-% package with the nocompress option which is supported by cite.sty v4.0
-% and later.
-
-
-
-
-
-% *** GRAPHICS RELATED PACKAGES ***
-%
-\ifCLASSINFOpdf
-  % \usepackage[pdftex]{graphicx}
-  % declare the path(s) where your graphic files are
-  % \graphicspath{{../pdf/}{../jpeg/}}
-  % and their extensions so you won't have to specify these with
-  % every instance of \includegraphics
-  % \DeclareGraphicsExtensions{.pdf,.jpeg,.png}
-\else
-  % or other class option (dvipsone, dvipdf, if not using dvips). graphicx
-  % will default to the driver specified in the system graphics.cfg if no
-  % driver is specified.
-  % \usepackage[dvips]{graphicx}
-  % declare the path(s) where your graphic files are
-  % \graphicspath{{../eps/}}
-  % and their extensions so you won't have to specify these with
-  % every instance of \includegraphics
-  % \DeclareGraphicsExtensions{.eps}
-\fi
-% graphicx was written by David Carlisle and Sebastian Rahtz. It is
-% required if you want graphics, photos, etc. graphicx.sty is already
-% installed on most LaTeX systems. The latest version and documentation
-% can be obtained at:
-% http://www.ctan.org/pkg/graphicx
-% Another good source of documentation is "Using Imported Graphics in
-% LaTeX2e" by Keith Reckdahl which can be found at:
-% http://www.ctan.org/pkg/epslatex
-%
-% latex, and pdflatex in dvi mode, support graphics in encapsulated
-% postscript (.eps) format. pdflatex in pdf mode supports graphics
-% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure
-% that all non-photo figures use a vector format (.eps, .pdf, .mps) and
-% not a bitmapped formats (.jpeg, .png). The IEEE frowns on bitmapped formats
-% which can result in "jaggedy"/blurry rendering of lines and letters as
-% well as large increases in file sizes.
-%
-% You can find documentation about the pdfTeX application at:
-% http://www.tug.org/applications/pdftex
-
-
-
-
-
-% *** MATH PACKAGES ***
-%
-%\usepackage{amsmath}
-% A popular package from the American Mathematical Society that provides
-% many useful and powerful commands for dealing with mathematics.
-%
-% Note that the amsmath package sets \interdisplaylinepenalty to 10000
-% thus preventing page breaks from occurring within multiline equations. Use:
-%\interdisplaylinepenalty=2500
-% after loading amsmath to restore such page breaks as IEEEtran.cls normally
-% does. amsmath.sty is already installed on most LaTeX systems. The latest
-% version and documentation can be obtained at:
-% http://www.ctan.org/pkg/amsmath
-
-
-
-
-
-% *** SPECIALIZED LIST PACKAGES ***
-%
-%\usepackage{algorithmic}
-% algorithmic.sty was written by Peter Williams and Rogerio Brito.
-% This package provides an algorithmic environment fo describing algorithms.
-% You can use the algorithmic environment in-text or within a figure
-% environment to provide for a floating algorithm. Do NOT use the algorithm
-% floating environment provided by algorithm.sty (by the same authors) or
-% algorithm2e.sty (by Christophe Fiorio) as the IEEE does not use dedicated
-% algorithm float types and packages that provide these will not provide
-% correct IEEE style captions. The latest version and documentation of
-% algorithmic.sty can be obtained at:
-% http://www.ctan.org/pkg/algorithms
-% Also of interest may be the (relatively newer and more customizable)
-% algorithmicx.sty package by Szasz Janos:
-% http://www.ctan.org/pkg/algorithmicx
-
-
-
-
-% *** ALIGNMENT PACKAGES ***
-%
-%\usepackage{array}
-% Frank Mittelbach's and David Carlisle's array.sty patches and improves
-% the standard LaTeX2e array and tabular environments to provide better
-% appearance and additional user controls. As the default LaTeX2e table
-% generation code is lacking to the point of almost being broken with
-% respect to the quality of the end results, all users are strongly
-% advised to use an enhanced (at the very least that provided by array.sty)
-% set of table tools. array.sty is already installed on most systems. The
-% latest version and documentation can be obtained at:
-% http://www.ctan.org/pkg/array
-
-
-% IEEEtran contains the IEEEeqnarray family of commands that can be used to
-% generate multiline equations as well as matrices, tables, etc., of high
-% quality.
-
-
-
-
-% *** SUBFIGURE PACKAGES ***
-%\ifCLASSOPTIONcompsoc
-%  \usepackage[caption=false,font=footnotesize,labelfont=sf,textfont=sf]{subfig}
-%\else
-%  \usepackage[caption=false,font=footnotesize]{subfig}
-%\fi
-% subfig.sty, written by Steven Douglas Cochran, is the modern replacement
-% for subfigure.sty, the latter of which is no longer maintained and is
-% incompatible with some LaTeX packages including fixltx2e. However,
-% subfig.sty requires and automatically loads Axel Sommerfeldt's caption.sty
-% which will override IEEEtran.cls' handling of captions and this will result
-% in non-IEEE style figure/table captions. To prevent this problem, be sure
-% and invoke subfig.sty's "caption=false" package option (available since
-% subfig.sty version 1.3, 2005/06/28) as this is will preserve IEEEtran.cls
-% handling of captions.
-% Note that the Computer Society format requires a sans serif font rather
-% than the serif font used in traditional IEEE formatting and thus the need
-% to invoke different subfig.sty package options depending on whether
-% compsoc mode has been enabled.
-%
-% The latest version and documentation of subfig.sty can be obtained at:
-% http://www.ctan.org/pkg/subfig
-
-
-
-
-% *** FLOAT PACKAGES ***
-%
-%\usepackage{fixltx2e}
-% fixltx2e, the successor to the earlier fix2col.sty, was written by
-% Frank Mittelbach and David Carlisle. This package corrects a few problems
-% in the LaTeX2e kernel, the most notable of which is that in current
-% LaTeX2e releases, the ordering of single and double column floats is not
-% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a
-% single column figure to be placed prior to an earlier double column
-% figure.
-% Be aware that LaTeX2e kernels dated 2015 and later have fixltx2e.sty's
-% corrections already built into the system in which case a warning will
-% be issued if an attempt is made to load fixltx2e.sty as it is no longer
-% needed.
-% The latest version and documentation can be found at:
-% http://www.ctan.org/pkg/fixltx2e
-
-
-%\usepackage{stfloats}
-% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e
-% the ability to do double column floats at the bottom of the page as well
-% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in
-% LaTeX2e). It also provides a command:
-%\fnbelowfloat
-% to enable the placement of footnotes below bottom floats (the standard
-% LaTeX2e kernel puts them above bottom floats). This is an invasive package
-% which rewrites many portions of the LaTeX2e float routines. It may not work
-% with other packages that modify the LaTeX2e float routines. The latest
-% version and documentation can be obtained at:
-% http://www.ctan.org/pkg/stfloats
-% Do not use the stfloats baselinefloat ability as the IEEE does not allow
-% \baselineskip to stretch. Authors submitting work to the IEEE should note
-% that the IEEE rarely uses double column equations and that authors should try
-% to avoid such use. Do not be tempted to use the cuted.sty or midfloat.sty
-% packages (also by Sigitas Tolusis) as the IEEE does not format its papers in
-% such ways.
-% Do not attempt to use stfloats with fixltx2e as they are incompatible.
-% Instead, use Morten Hogholm'a dblfloatfix which combines the features
-% of both fixltx2e and stfloats:
-%
-% \usepackage{dblfloatfix}
-% The latest version can be found at:
-% http://www.ctan.org/pkg/dblfloatfix
-
-
-
-
-% *** PDF, URL AND HYPERLINK PACKAGES ***
-%
-%\usepackage{url}
-% url.sty was written by Donald Arseneau. It provides better support for
-% handling and breaking URLs. url.sty is already installed on most LaTeX
-% systems. The latest version and documentation can be obtained at:
-% http://www.ctan.org/pkg/url
-% Basically, \url{my_url_here}.
-
-
-
-
-% *** Do not adjust lengths that control margins, column widths, etc. ***
-% *** Do not use packages that alter fonts (such as pslatex).         ***
-% There should be no need to do such things with IEEEtran.cls V1.6 and later.
-% (Unless specifically asked to do so by the journal or conference you plan
-% to submit to, of course. )
-
+%\usepackage{orcidlink}
+\usepackage{balance}
+\hypersetup{
+  colorlinks=true,
+  citecolor=blue,
+  linkcolor=blue,
+  filecolor=blue,
+  urlcolor=blue,
+}
 
 % correct bad hyphenation here
-\hyphenation{}
+% \hyphenation{}
 
 
-% =============================================================================
-\begin{document}
-% =============================================================================
-%
-% paper title
-% Titles are generally capitalized except for words such as a, an, and, as,
-% at, but, by, for, in, nor, of, on, or, the, to and up, which are usually
-% not capitalized unless they are the first or last word of the title.
-% Linebreaks \\ can be used within to get better formatting as desired.
-% Do not put math or special symbols in the title.
 \title{<%= config[:title] %> -- <%= config[:subtitle] %>}
 
 
 % author names and affiliations
 % use a multiple column layout for up to three different
 % affiliations
-\author{\IEEEauthorblockN{<%= config[:author] %>$^{\ast}$,
-    Name2$^{\dagger}$, Name3$^{\ddagger}$ and Pascal Bouvry$^{\ast}$}
-  \IEEEauthorblockA{
-    $^{\ast}$Computer Science and Communications (CSC) Research Unit\\
+\author{
+  \IEEEauthorblockN{%
+    Sebastien Varrette$^{\ast}$, %\,\orcidlink{0000-0001-9011-851X},
+    <%= config[:author] %>,     
+    FirstName2 LastName2$^{\ddagger}$, %\,\orcidlink{XXXX},
+    and
+    FirstName3 LastName3$^{\dagger}$ %\,\orcidlink{YYYY}
+  }
+  \IEEEauthorblockA{%
+    $^{\ast}$Faculty of Science, Technology and Medicine (FSTM)\\
     $^{\dagger}$Interdisciplinary Centre for Security Reliability and Trust\\
     $^{\ddagger}$Research Unit in Engineering Science\\
     2, avenue de l'Universit\'e, L-4365 Esch-sur-Alzette, Luxembourg\\
-    \texttt{Firstname.Name@uni.lu}}
+    \texttt{Firstname.Name@uni.lu}
+  }
 }
 
-% conference papers do not typically use \thanks and this command
-% is locked out in conference mode. If really needed, such as for
-% the acknowledgment of grants, issue a \IEEEoverridecommandlockouts
-% after \documentclass
-
-% for over three affiliations, or if they all won't fit within the width
-% of the page (and note that there is less available width in this regard for
-% compsoc conferences compared to traditional conferences), use this
-% alternative format:
-%
-%\author{\IEEEauthorblockN{Michael Shell\IEEEauthorrefmark{1},
-%Homer Simpson\IEEEauthorrefmark{2},
-%James Kirk\IEEEauthorrefmark{3},
-%Montgomery Scott\IEEEauthorrefmark{3} and
-%Eldon Tyrell\IEEEauthorrefmark{4}}
-%\IEEEauthorblockA{\IEEEauthorrefmark{1}School of Electrical and Computer Engineering\\
-%Georgia Institute of Technology,
-%Atlanta, Georgia 30332--0250\\ Email: see http://www.michaelshell.org/contact.html}
-%\IEEEauthorblockA{\IEEEauthorrefmark{2}Twentieth Century Fox, Springfield, USA\\
-%Email: homer@thesimpsons.com}
-%\IEEEauthorblockA{\IEEEauthorrefmark{3}Starfleet Academy, San Francisco, California 96678-2391\\
-%Telephone: (800) 555--1212, Fax: (888) 555--1212}
-%\IEEEauthorblockA{\IEEEauthorrefmark{4}Tyrell Inc., 123 Replicant Street, Los Angeles, California 90210--4321}}
-
-
 % use for special paper notices
 %\IEEEspecialpapernotice{(Invited Paper)}
 
+% =============================================================================
+\begin{document}
+% =============================================================================
 
 % make the title area
 \maketitle
@@ -406,20 +74,11 @@
 
 \acresetall
 
-% no keywords
-
-
-
-
-% For peer review papers, you can put extra information on the cover
-% page as needed:
-% \ifCLASSOPTIONpeerreview
-% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
-% \fi
-%
-% For peerreview papers, this IEEEtran command inserts a page break and
-% creates the second title. It will be ignored for other modes.
-\IEEEpeerreviewmaketitle
+\begin{IEEEkeywords}
+  High Performance Computing, % \and
+  Fault Tolerance, % \and
+  Security
+\end{IEEEkeywords}
 
 
 % ===================================
@@ -452,44 +111,17 @@
 \label{sec:conclusion}
 \input{_conclusion}
 
-
-
-
-
-% conference papers do not normally have an appendix
-
-
-
-% use section* for acknowledgment
-\ifCLASSOPTIONcompsoc
-  % The Computer Society usually uses the plural form
-  \section*{Acknowledgments}
-\else
-  % regular IEEE prefers the singular form
-  \section*{Acknowledgment}
-\fi
-the experiments presented in this paper were carried out
-using the HPC facilities of the University of Luxembourg~\cite{VBCG_HPCS14}
-{\small -- see \url{http://hpc.uni.lu}}.
-
-
-
-
-
-% trigger a \newpage just before the given reference
-% number - used to balance the columns on the last page
-% adjust value as needed - may need to be readjusted if
-% the document is modified later
-%\IEEEtriggeratref{8}
-% The "triggered" command can be changed if desired:
-%\IEEEtriggercmd{\enlargethispage{-5in}}
-
-% references section
+~\\
+{\noindent \textbf{Acknowledgments:}}
+The experiments presented in this paper were carried out
+using the HPC facilities of the University of Luxembourg~\cite{VCPKVO_HPCCT22}
+{\small -- see \url{https://hpc.uni.lu}}.
 
 \bibliographystyle{IEEEtran}
+\balance
 \bibliography{biblio}
 
-\appendix
+% \appendix
 
 % \section{Acronyms used}
 \input{_acronyms}

data/templates/latex/article-llncs/main.tex.erb

@@ -1,9 +1,9 @@
 % =============================================================================
 % File:  <%= config[:name] %>.tex --
 % Author(s): <%= config[:author] %> (<%= config[:mail] %>)
-% Time-stamp: <Mon 2017-01-16 16:09 svarrette>
+% Time-stamp: <Wed 2022-08-17 10:49 svarrette>
 %
-% Copyright (c) <%= Time.now.year %> <%= config[:author] %><Sebastien.Varrette@uni.lu>
+% Copyright (c) <%= Time.now.year %> <%= config[:author] %> (Sebastien.Varrette@uni.lu)
 %
 % For more information:
 % - LaTeX: http://www.latex-project.org/
@@ -12,17 +12,23 @@
 % http://www.ctan.org/tex-archive/info/symbols/comprehensive/symbols-a4.pdf
 % =============================================================================
 % /!\ WARNING: inspired from llncs.dem demonstration file of the LaTeX macro
-% package from Springer-Verlag for Lecture Notes in Computer Science, version 2.4
-% for LaTeX2e as of 16. April 2010
 % See http://www.springer.com/gp/computer-science/lncs/conference-proceedings-guidelines
+% See also https://latextemplates.github.io/LNCS/
 
-\documentclass[conference]{llncs}
+\documentclass[runningheads]{llncs}
 %\documentclass[conference,runningheads]{llncs}
 
 %\newcommand{\blind}[1]{\textit{\textcolor{blue}{[removed for blind review purposes]}}}
 \newcommand{\blind}[1]{#1}
 
 \usepackage{_style}
+\hypersetup{
+  colorlinks=true,
+  citecolor=blue,
+  linkcolor=blue,
+  filecolor=blue,
+  urlcolor=blue,
+}
 
 % correct bad hyphenation here
 \hyphenation{}
@@ -36,22 +42,26 @@
 % author names and affiliations
 \author{\blind{%
     <%= config[:author] %>$^{\ast}$,
-    Name2$^{\dagger}$, Name3$^{\ddagger}$ and Pascal Bouvry$^{\ast}$
+    \orcidID{0000-0001-9011-851X}
+    \and
+    FirstName2 LastName2$^{\ddagger}$
+    \orcidID{XXXX}
+    \and
+    FirstName3 LastName3$^{\dagger}$
+    \orcidID{YYYY}
   }
 }
 \institute{\blind{%
-    \email{Firstname.Lastname@uni.lu}\\
     $^{\ast}$Computer Science and Communications (CSC) Research Unit\\
     $^{\dagger}$Interdisciplinary Centre for Security Reliability and Trust\\
     $^{\ddagger}$Research Unit in Engineering Science\\
     University of Luxembourg\\
-    6, rue Richard Coudenhove-Kalergi\\
-    L-1359 Luxembourg, Luxembourg\\
+    2, avenue de l'Universit\'e, L-4365 Esch-sur-Alzette, Luxembourg\\
+    \email{\{firtname.lastname\}@uni.lu}
   }
 }
-
-%\authorrunning{ <%= config[:author] %>, Name2, Name3 and Pascal Bouvry}
-%\titlerunning{<%= config[:title] %>\ldots}
+\authorrunning{<%= config[:author] %> et al.}
+% \titlerunning{<%= config[:title] %>\ldots}
 % =============================================================================
 
 \begin{document}
@@ -62,6 +72,11 @@
 %_______________
 \begin{abstract}
   \input{_abstract}
+  \keywords{%
+    High Performance Computing \and
+    Fault Tolerance \and
+    Security
+  }
 \end{abstract}
 
 \acresetall
@@ -103,16 +118,13 @@
 \label{sec:conclusion}
 \input{_conclusion}
 
-
-
 ~\\
 {\noindent \textbf{Acknowledgments:}}
-% \\
 The experiments presented in this paper were carried out
-using the HPC facilities of the University of Luxembourg~\cite{VBCG_HPCS14}
-{\small -- see \url{http://hpc.uni.lu}}.
+using the HPC facilities of the University of Luxembourg~\cite{VCPKVO_HPCCT22}
+{\small -- see \url{https://hpc.uni.lu}}.
 
-\bibliographystyle{splncs03}
+\bibliographystyle{splncs04}
 % comma separated list of bibtex files, **without** .bib extension
 \bibliography{biblio}
 

data/templates/latex/beamer/.Makefile.local

@@ -0,0 +1 @@
+BIBTEX = biber

data/templates/latex/beamer/_content.md.erb

@@ -155,7 +155,7 @@ The classical markdown syntax `![](<path/to/image>)` does not allow any control
 
 So you probaby wish to do it in \LaTeX\ directly
 
-\centerline{\includegraphics[width=4em]{logo_ULHPC.pdf}}
+\centerline{\includegraphics[width=4em]{logo_ANSSI.png}}
 
 A normal (left aligned) text afterward
 

data/templates/latex/beamer/main.tex.erb

@@ -1,9 +1,9 @@
+% Time-stamp: <Thu 2023-11-23 17:53 svarrette>
 % =============================================================================
 % File:  <%= config[:name] %>.tex --
 % Author(s): <%= config[:author] %> (<%= config[:mail] %>)
-% Time-stamp: <Thu 2017-08-17 22:22 svarrette>
 %
-% Copyright (c) <%= Time.now.year %> <%= config[:author] %><Sebastien.Varrette@uni.lu>
+% Copyright (c) <%= Time.now.year %> <%= config[:author] %>
 %
 % For more information:
 % - LaTeX: http://www.latex-project.org/
@@ -12,9 +12,19 @@
 % http://www.ctan.org/tex-archive/info/symbols/comprehensive/symbols-a4.pdf
 % =============================================================================
 
-\documentclass{beamer}
+\documentclass[aspectratio=169]{beamer}
 % \documentclass[draft]{beamer}
 \usepackage{_style}
+\usepackage[
+  backend=biber,
+  maxnames=999,
+  giveninits=true,
+  style=verbose,
+]{biblatex}
+% \addbibresource{biblio.bib}
+\setbeamerfont{footnote}{size=\tiny}
+% Usage in slides: \footfullcite{<bibentry>}
+
 
 % The key part to use my theme -- if you precise nothing, the image that
 % illustrate the slides is assumed to be images/slides_image.jpg
@@ -31,6 +41,8 @@
 
 \graphicspath{{images/}} % Add this directory to the searched paths for graphics
 
+% \usetikzlibrary{arrows,shapes,positioning,shadows,trees,intersections,backgrounds,calc,fit}
+
 
 %%%%%%%%%% Header %%%%%%%%%%%%
 \title{<%= config[:title] %>}
@@ -39,9 +51,11 @@
 \author[<%= config[:author] %> \& al.]{
   \underline{<%= config[:author] %>}
 }
-\institute[PCOG Research unit]{
-  Parallel Computing and Optimization Group (\href{http://pcog.uni.lu}{PCOG}),
-  University of Luxembourg (\href{http://www.uni.lu}{UL}), Luxembourg
+\institute[ANSSI/SDE/DST/LAM]{
+  ANSSI/SDE/DST/LAM
+  Agence nationale de la sécurité des systèmes d'information / French National Cybersecurity Agency
+  Laboratoire Architectures Matérielles et logicielles (LAM)
+  \myurl{<%= config[:url] %>}
 }
 
 % Mandatory to **declare** a logo to be placed on the bottom right -- normally the
@@ -79,11 +93,10 @@
     \column{0.5\textwidth}
     % \emph{Contact}\\
     {\tiny
-      \emph{<%= config[:author] %>}\\
-      ~~~~ \structure{University of Luxembourg, Belval Campus}:\\
-      ~~~~ Maison du Nombre, 4th floor\\
-      ~~~~ 2, avenue de l'Universit\'e\\
-      ~~~~ L-4365 Esch-sur-Alzette\\
+      \emph{ANSSI/SDE/DST/LAM}\\
+      ~~~~ \structure{Laboratoire Architectures Matérielles et logicielles}\\
+      \emph{Contacts:}\\
+      ~~~~\emph{<%= config[:author] %>}\\
       ~~~~ \textit{mail:} \href{mailto:<%= config[:mail] %>}{<%= config[:mail] %>}\\
     }
     \column{0.5\textwidth}