fairchild-poolparty 1.1.5 → 1.2.12

data/lib/poolparty/templates/apache2/debian.conf.erb

@@ -0,0 +1,675 @@
+# 000-debian.conf -- this reproduces the default debian configuration
+
+#
+# Based upon the NCSA server configuration files originally by Rob McCool.
+#
+# This is the main Apache server configuration file.  It contains the
+# configuration directives that give the server its instructions.
+# See <URL:http://httpd.apache.org/docs-2.1/> for detailed information about
+# the directives.
+#
+# Do NOT simply read the instructions in here without understanding
+# what they do.  They're here only as hints or reminders.  If you are unsure
+# consult the online docs. You have been warned.  
+#
+# The configuration directives are grouped into three basic sections:
+#  1. Directives that control the operation of the Apache server process as a
+#     whole (the 'global environment').
+#  2. Directives that define the parameters of the 'main' or 'default' server,
+#     which responds to requests that aren't handled by a virtual host.
+#     These directives also provide default values for the settings
+#     of all virtual hosts.
+#  3. Settings for virtual hosts, which allow Web requests to be sent to
+#     different IP addresses or hostnames and have them handled by the
+#     same Apache server process.
+#
+# Configuration and logfile names: If the filenames you specify for many
+# of the server's control files begin with "/" (or "drive:/" for Win32), the
+# server will use that explicit path.  If the filenames do *not* begin
+# with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log"
+# with ServerRoot set to "" will be interpreted by the
+# server as "//var/log/apache2/foo.log".
+#
+
+### Section 1: Global Environment
+#
+# The directives in this section affect the overall operation of Apache,
+# such as the number of concurrent requests it can handle or where it
+# can find its configuration files.
+#
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# NOTE!  If you intend to place this on an NFS (or otherwise network)
+# mounted filesystem then please read the LockFile documentation (available
+# at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>);
+# you will save yourself a lot of trouble.
+#
+# Do NOT add a slash at the end of the directory path.
+#
+ServerRoot "/etc/apache2"
+
+#
+# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
+#
+#<IfModule !mpm_winnt.c>
+#<IfModule !mpm_netware.c>
+LockFile /var/lock/apache2/accept.lock
+#</IfModule>
+#</IfModule>
+
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+#
+PidFile /var/run/apache2.pid
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout 300
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive On
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests 100
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout 15
+
+##
+## Server-Pool Size Regulation (MPM specific)
+## 
+
+# prefork MPM
+# StartServers: number of server processes to start
+# MinSpareServers: minimum number of server processes which are kept spare
+# MaxSpareServers: maximum number of server processes which are kept spare
+# MaxClients: maximum number of server processes allowed to start
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_prefork_module>
+    StartServers          5
+    MinSpareServers       5
+    MaxSpareServers      10
+    MaxClients          150
+    MaxRequestsPerChild   0
+</IfModule>
+
+# worker MPM
+# StartServers: initial number of server processes to start
+# MaxClients: maximum number of simultaneous client connections
+# MinSpareThreads: minimum number of worker threads which are kept spare
+# MaxSpareThreads: maximum number of worker threads which are kept spare
+# ThreadsPerChild: constant number of worker threads in each server process
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule mpm_worker_module>
+    StartServers          2
+    MaxClients          150
+    MinSpareThreads      25
+    MaxSpareThreads      75 
+    ThreadsPerChild      25
+    MaxRequestsPerChild   0
+</IfModule>
+
+User www-data
+Group www-data
+
+#
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives.  See also the AllowOverride
+# directive.
+#
+
+AccessFileName .htaccess
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being 
+# viewed by Web clients. 
+#
+<Files ~ "^\.ht">
+    Order allow,deny
+    Deny from all
+</Files>
+
+TypesConfig /etc/mime.types
+
+#
+# DefaultType is the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value.  If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+DefaultType text/plain
+
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
+
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here.  If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog /var/log/apache2/error.log
+
+#
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+# the apache2 puppet config already does this stuff:
+## Include module configuration:
+#Include /etc/apache2/mods-enabled/*.load
+#Include /etc/apache2/mods-enabled/*.conf
+#
+## Include all the user configurations:
+#Include /etc/apache2/httpd.conf
+#
+## Include ports listing
+#Include /etc/apache2/ports.conf
+#
+## Include generic snippets of statements
+#Include /etc/apache2/conf.d/
+
+# the apache2 puppet config removes ports.conf, which would have been 
+# included above, and which contains (by default) the following line:
+
+#
+# The following directives define some format nicknames for use with
+# a CustomLog directive (see below).
+#
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %b" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+
+#
+# ServerTokens
+# This directive configures what you return as the Server HTTP response
+# Header. The default is 'Full' which sends information about the OS-Type
+# and compiled in modules.
+# Set to one of:  Full | OS | Minor | Minimal | Major | Prod
+# where Full conveys the most information, and Prod the least.
+#
+ServerTokens Full
+
+#
+# Optionally add a line containing the server version and virtual host
+# name to server-generated pages (internal error documents, FTP directory 
+# listings, mod_status and mod_info output etc., but not CGI generated 
+# documents or custom error documents).
+# Set to "EMail" to also include a mailto: link to the ServerAdmin.
+# Set to one of:  On | Off | EMail
+#
+ServerSignature On
+
+<IfModule alias_module>
+    #
+    # Aliases: Add here as many aliases as you need (with no limit). The format is 
+    # Alias fakename realname
+    #
+    # Note that if you include a trailing / on fakename then the server will
+    # require it to be present in the URL.  So "/icons" isn't aliased in this
+    # example, only "/icons/".  If the fakename is slash-terminated, then the 
+    # realname must also be slash terminated, and if the fakename omits the 
+    # trailing slash, the realname must also omit it.
+    #
+    # We include the /icons/ alias for FancyIndexed directory listings.  If
+    # you do not use FancyIndexing, you may comment this out.
+    #
+    Alias /icons/ "/usr/share/apache2/icons/"
+
+    <Directory "/usr/share/apache2/icons">
+        Options Indexes MultiViews
+        AllowOverride None
+        Order allow,deny
+        Allow from all
+    </Directory>
+
+</IfModule>
+
+#
+# Directives controlling the display of server-generated directory listings.
+#
+<IfModule mod_autoindex.c>
+
+    #
+    # IndexOptions: Controls the appearance of server-generated directory
+    # listings.
+    #
+    IndexOptions FancyIndexing VersionSort HTMLTable NameWidth=*
+
+    #
+    # AddIcon* directives tell the server which icon to show for different
+    # files or filename extensions.  These are only displayed for
+    # FancyIndexed directories.
+    #
+    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+    AddIconByType (TXT,/icons/text.gif) text/*
+    AddIconByType (IMG,/icons/image2.gif) image/*
+    AddIconByType (SND,/icons/sound2.gif) audio/*
+    AddIconByType (VID,/icons/movie.gif) video/*
+
+    AddIcon /icons/binary.gif .bin .exe
+    AddIcon /icons/binhex.gif .hqx
+    AddIcon /icons/tar.gif .tar
+    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+    AddIcon /icons/a.gif .ps .ai .eps
+    AddIcon /icons/layout.gif .html .shtml .htm .pdf
+    AddIcon /icons/text.gif .txt
+    AddIcon /icons/c.gif .c
+    AddIcon /icons/p.gif .pl .py
+    AddIcon /icons/f.gif .for
+    AddIcon /icons/dvi.gif .dvi
+    AddIcon /icons/uuencoded.gif .uu
+    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+    AddIcon /icons/tex.gif .tex
+    AddIcon /icons/bomb.gif core
+
+    AddIcon /icons/back.gif ..
+    AddIcon /icons/hand.right.gif README
+    AddIcon /icons/folder.gif ^^DIRECTORY^^
+    AddIcon /icons/blank.gif ^^BLANKICON^^
+
+    #
+    # DefaultIcon is which icon to show for files which do not have an icon
+    # explicitly set.
+    #
+    DefaultIcon /icons/unknown.gif
+
+    #
+    # AddDescription allows you to place a short description after a file in
+    # server-generated indexes.  These are only displayed for FancyIndexed
+    # directories.
+    # Format: AddDescription "description" filename
+    #
+    #AddDescription "GZIP compressed document" .gz
+    #AddDescription "tar archive" .tar
+    #AddDescription "GZIP compressed tar archive" .tgz
+
+    #
+    # ReadmeName is the name of the README file the server will look for by
+    # default, and append to directory listings.
+    #
+    # HeaderName is the name of a file which should be prepended to
+    # directory indexes. 
+    ReadmeName README.html
+    HeaderName HEADER.html
+
+    #
+    # IndexIgnore is a set of filenames which directory indexing should ignore
+    # and not include in the listing.  Shell-style wildcarding is permitted.
+    #
+    IndexIgnore .??* *~ *# RCS CVS *,v *,t 
+</IfModule>
+
+<IfModule mod_mime.c>
+
+    #
+    # AddType allows you to add to or override the MIME configuration
+    # file mime.types for specific file types.
+    #
+    #AddType application/x-gzip .tgz
+    #
+    # AddEncoding allows you to have certain browsers uncompress
+    # information on the fly. Note: Not all browsers support this.
+    # Despite the name similarity, the following Add* directives have
+    # nothing to do with the FancyIndexing customization directives above.
+    #
+    #AddEncoding x-compress .Z
+    #AddEncoding x-gzip .gz .tgz
+    #
+    # If the AddEncoding directives above are commented-out, then you
+    # probably should define those extensions to indicate media types:
+    #
+    AddType application/x-compress .Z
+    AddType application/x-gzip .gz .tgz
+
+    #
+    # DefaultLanguage and AddLanguage allows you to specify the language of 
+    # a document. You can then use content negotiation to give a browser a 
+    # file in a language the user can understand.
+    #
+    # Specify a default language. This means that all data
+    # going out without a specific language tag (see below) will 
+    # be marked with this one. You probably do NOT want to set
+    # this unless you are sure it is correct for all cases.
+    #
+    # * It is generally better to not mark a page as 
+    # * being a certain language than marking it with the wrong
+    # * language!
+    #
+    # DefaultLanguage nl
+    #
+    # Note 1: The suffix does not have to be the same as the language
+    # keyword --- those with documents in Polish (whose net-standard
+    # language code is pl) may wish to use "AddLanguage pl .po" to
+    # avoid the ambiguity with the common suffix for perl scripts.
+    #
+    # Note 2: The example entries below illustrate that in some cases 
+    # the two character 'Language' abbreviation is not identical to 
+    # the two character 'Country' code for its country,
+    # E.g. 'Danmark/dk' versus 'Danish/da'.
+    #
+    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
+    # specifier. There is 'work in progress' to fix this and get
+    # the reference data for rfc1766 cleaned up.
+    #
+    # Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
+    # English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
+    # Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
+    # Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
+    # Norwegian (no) - Polish (pl) - Portugese (pt)
+    # Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
+    # Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
+    #
+    AddLanguage ca .ca
+    AddLanguage cs .cz .cs
+    AddLanguage da .dk
+    AddLanguage de .de
+    AddLanguage el .el
+    AddLanguage en .en
+    AddLanguage eo .eo
+    AddLanguage es .es
+    AddLanguage et .et
+    AddLanguage fr .fr
+    AddLanguage he .he
+    AddLanguage hr .hr
+    AddLanguage it .it
+    AddLanguage ja .ja
+    AddLanguage ko .ko
+    AddLanguage ltz .ltz
+    AddLanguage nl .nl
+    AddLanguage nn .nn
+    AddLanguage no .no
+    AddLanguage pl .po
+    AddLanguage pt .pt
+    AddLanguage pt-BR .pt-br
+    AddLanguage ru .ru
+    AddLanguage sv .sv
+    AddLanguage zh-CN .zh-cn
+    AddLanguage zh-TW .zh-tw
+</IfModule>
+
+<IfModule mod_negotiation.c>
+    #
+    # LanguagePriority allows you to give precedence to some languages
+    # in case of a tie during content negotiation.
+    #
+    # Just list the languages in decreasing order of preference. We have
+    # more or less alphabetized them here. You probably want to change this.
+    #
+    LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
+
+    #
+    # ForceLanguagePriority allows you to serve a result page rather than
+    # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
+    # [in case no accepted languages matched the available variants]
+    #
+    ForceLanguagePriority Prefer Fallback
+
+</IfModule>
+
+<IfModule mod_mime.c>
+    #
+    # Specify a default charset for all pages sent out. This is
+    # always a good idea and opens the door for future internationalisation
+    # of your web site, should you ever want it. Specifying it as
+    # a default does little harm; as the standard dictates that a page
+    # is in iso-8859-1 (latin1) unless specified otherwise i.e. you
+    # are merely stating the obvious. There are also some security
+    # reasons in browsers, related to javascript and URL parsing
+    # which encourage you to always set a default char set.
+    #
+    #AddDefaultCharset ISO-8859-1
+
+    #
+    # Commonly used filename extensions to character sets. You probably
+    # want to avoid clashes with the language extensions, unless you
+    # are good at carefully testing your setup after each change.
+    # See http://www.iana.org/assignments/character-sets for the
+    # official list of charset names and their respective RFCs.
+    #
+    AddCharset us-ascii    .ascii .us-ascii
+    AddCharset ISO-8859-1  .iso8859-1  .latin1
+    AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
+    AddCharset ISO-8859-3  .iso8859-3  .latin3
+    AddCharset ISO-8859-4  .iso8859-4  .latin4
+    AddCharset ISO-8859-5  .iso8859-5  .cyr .iso-ru
+    AddCharset ISO-8859-6  .iso8859-6  .arb .arabic
+    AddCharset ISO-8859-7  .iso8859-7  .grk .greek
+    AddCharset ISO-8859-8  .iso8859-8  .heb .hebrew
+    AddCharset ISO-8859-9  .iso8859-9  .latin5 .trk
+    AddCharset ISO-8859-10  .iso8859-10  .latin6
+    AddCharset ISO-8859-13  .iso8859-13
+    AddCharset ISO-8859-14  .iso8859-14  .latin8
+    AddCharset ISO-8859-15  .iso8859-15  .latin9
+    AddCharset ISO-8859-16  .iso8859-16  .latin10
+    AddCharset ISO-2022-JP .iso2022-jp .jis
+    AddCharset ISO-2022-KR .iso2022-kr .kis
+    AddCharset ISO-2022-CN .iso2022-cn .cis
+    AddCharset Big5        .Big5       .big5 .b5
+    AddCharset cn-Big5     .cn-big5
+    # For russian, more than one charset is used (depends on client, mostly):
+    AddCharset WINDOWS-1251 .cp-1251   .win-1251
+    AddCharset CP866       .cp866
+    AddCharset KOI8      .koi8
+    AddCharset KOI8-E      .koi8-e
+    AddCharset KOI8-r      .koi8-r .koi8-ru
+    AddCharset KOI8-U      .koi8-u
+    AddCharset KOI8-ru     .koi8-uk .ua
+    AddCharset ISO-10646-UCS-2 .ucs2
+    AddCharset ISO-10646-UCS-4 .ucs4
+    AddCharset UTF-7       .utf7
+    AddCharset UTF-8       .utf8
+    AddCharset UTF-16      .utf16
+    AddCharset UTF-16BE    .utf16be
+    AddCharset UTF-16LE    .utf16le
+    AddCharset UTF-32      .utf32
+    AddCharset UTF-32BE    .utf32be
+    AddCharset UTF-32LE    .utf32le
+    AddCharset euc-cn      .euc-cn
+    AddCharset euc-gb      .euc-gb
+    AddCharset euc-jp      .euc-jp
+    AddCharset euc-kr      .euc-kr
+    #Not sure how euc-tw got in - IANA doesn't list it???
+    AddCharset EUC-TW      .euc-tw
+    AddCharset gb2312      .gb2312 .gb
+    AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
+    AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
+    AddCharset shift_jis   .shift_jis .sjis
+
+    #
+    # AddHandler allows you to map certain file extensions to "handlers":
+    # actions unrelated to filetype. These can be either built into the server
+    # or added with the Action directive (see below)
+    #
+    # To use CGI scripts outside of ScriptAliased directories:
+    # (You will also need to add "ExecCGI" to the "Options" directive.)
+    #
+    #AddHandler cgi-script .cgi
+
+    #
+    # For files that include their own HTTP headers:
+    #
+    #AddHandler send-as-is asis
+
+    #
+    # For server-parsed imagemap files:
+    #
+    #AddHandler imap-file map
+
+    #
+    # For type maps (negotiated resources):
+    # (This is enabled by default to allow the Apache "It Worked" page
+    #  to be distributed in multiple languages.)
+    #
+    AddHandler type-map var
+
+    #
+    # Filters allow you to process content before it is sent to the client.
+    #
+    # To parse .shtml files for server-side includes (SSI):
+    # (You will also need to add "Includes" to the "Options" directive.)
+    #
+    AddType text/html .shtml
+    AddOutputFilter INCLUDES .shtml
+</IfModule>
+
+#
+# Action lets you define media types that will execute a script whenever
+# a matching file is called. This eliminates the need for repeated URL
+# pathnames for oft-used CGI file processors.
+# Format: Action media/type /cgi-script/location
+# Format: Action handler-name /cgi-script/location
+#
+
+#
+# Customizable error responses come in three flavors:
+# 1) plain text 2) local redirects 3) external redirects
+#
+# Some examples:
+#ErrorDocument 500 "The server made a boo boo."
+#ErrorDocument 404 /missing.html
+#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
+#ErrorDocument 402 http://www.example.com/subscription_info.html
+#
+
+#
+# Putting this all together, we can internationalize error responses.
+#
+# We use Alias to redirect any /error/HTTP_<error>.html.var response to
+# our collection of by-error message multi-language collections.  We use 
+# includes to substitute the appropriate text.
+#
+# You can modify the messages' appearance without changing any of the
+# default HTTP_<error>.html.var files by adding the line:
+#
+#   Alias /error/include/ "/your/include/path/"
+#
+# which allows you to create your own set of files by starting with the
+# /usr/share/apache2/error/include/ files and copying them to /your/include/path/, 
+# even on a per-VirtualHost basis.  The default include files will display
+# your Apache version number and your ServerAdmin email address regardless
+# of the setting of ServerSignature.
+#
+# The internationalized error documents require mod_alias, mod_include
+# and mod_negotiation.  To activate them, uncomment the following 30 lines.
+
+#    Alias /error/ "/usr/share/apache2/error/"
+#
+#    <Directory "/usr/share/apache2/error">
+#        AllowOverride None
+#        Options IncludesNoExec
+#        AddOutputFilter Includes html
+#        AddHandler type-map var
+#        Order allow,deny
+#        Allow from all
+#        LanguagePriority en cs de es fr it nl sv pt-br ro
+#        ForceLanguagePriority Prefer Fallback
+#    </Directory>
+#
+#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
+#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
+#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
+#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
+#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
+#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
+#    ErrorDocument 410 /error/HTTP_GONE.html.var
+#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
+#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
+#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
+#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
+#    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
+#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
+#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
+#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
+#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
+#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
+
+<IfModule mod_setenvif.c>
+    #
+    # The following directives modify normal HTTP response behavior to
+    # handle known problems with browser implementations.
+    #
+    BrowserMatch "Mozilla/2" nokeepalive
+    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
+    BrowserMatch "RealPlayer 4\.0" force-response-1.0
+    BrowserMatch "Java/1\.0" force-response-1.0
+    BrowserMatch "JDK/1\.0" force-response-1.0
+
+    #
+    # The following directive disables redirects on non-GET requests for
+    # a directory that does not include the trailing slash.  This fixes a 
+    # problem with Microsoft WebFolders which does not appropriately handle 
+    # redirects for folders with DAV methods.
+    # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
+    #
+    BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
+    BrowserMatch "MS FrontPage" redirect-carefully
+    BrowserMatch "^WebDrive" redirect-carefully
+    BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
+    BrowserMatch "^gnome-vfs/1.0" redirect-carefully
+    BrowserMatch "^XML Spy" redirect-carefully
+    BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
+</IfModule>
+
+#<IfModule mod_status.c>
+    #
+    # Allow server status reports generated by mod_status,
+    # with the URL of http://servername/server-status
+    # Change the ".example.com" to match your domain to enable.
+    #
+    #<Location /server-status>
+    #    SetHandler server-status
+    #    Order deny,allow
+    #    Deny from all
+    #    Allow from .example.com
+    #</Location>
+#</IfModule>
+
+#<IfModule mod_info.c>
+    #
+    # Allow remote server configuration reports, with the URL of
+    #  http://servername/server-info (requires that mod_info.c be loaded).
+    # Change the ".example.com" to match your domain to enable.
+    #
+    #<Location /server-info>
+    #    SetHandler server-info
+    #    Order deny,allow
+    #    Deny from all
+    #    Allow from .example.com
+    #</Location>
+#</IfModule>
+
+# the puppet apache2 module does this already:
+## Include the virtual host configurations:
+#Include /etc/apache2/sites-enabled/