extface 0.1.7 → 0.1.8

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA1:
-  metadata.gz: 7d419941d1c2d3dd9cb911afa7e835e059b230dd
-  data.tar.gz: 6021598855e22bda8cd379b566ed93dc81b48449
+  metadata.gz: 900544046448abb9c9c713e46a328fb7024a6d7b
+  data.tar.gz: bb25d5f73e3cc268ee61178863c9a40768afa006
 SHA512:
-  metadata.gz: c28049ac7e43208bb04894aade5f02bbfff1b3049cbcc3812ea47d8248bfbcc60d269c60f7a541939dd00ea372abf98d61002096afd9f4ad64e75d103117c488
-  data.tar.gz: 25698e9e60feddf64ae16e36421c119574d439e810cca672c762f6bfd55506988686f83af887cc3c768a67f45a25cd09e4b84dfe4f6815f33952cf86b75e4f4f
+  metadata.gz: f8e3ab792ef789a4a5ae4999ce42837b53b1c898a8f588306f660bf8f59a9707427177b962932800ead930d957f30df9ad0ed1c628cddc40ce16b82cab1d95b1
+  data.tar.gz: 77251dc8768f3ad7645a46d740a8d0b89cbc5082e97129116a59fa47f62de4822f7a51228fd6612ccd838577ab339dfe10c655f0a445bb76b1700d393d7f4857

data/app/controllers/extface/devices_controller.rb

@@ -54,6 +54,20 @@ module Extface
       @job = @device.driver.print_test_page if params[:test_page]
       render action: :show
     end
+    
+    def fiscal
+      set_device
+      if @device.fiscal?
+        @job = case
+          when params[:non_fiscal_test].present? then @device.driver.non_fiscal_test
+          when params[:fiscal_test].present? then @device.driver.fiscal_test
+          when params[:x_report].present? then @device.driver.x_report_session
+          when params[:z_report].present? then @device.driver.z_report_session
+          when params[:cancel_fiscal_doc].present? then @device.driver.cancel_doc_session
+        end
+      end
+      render action: :show
+    end
 
     private
       # Use callbacks to share common setup or constraints between actions.

data/app/controllers/extface/handler_controller.rb

@@ -33,7 +33,7 @@ module Extface
           r.append device.uuid, request.body.read
           @full_buffer = r.get device.uuid
         end
-        if bytes_porcessed = device.driver.handle(@full_buffer)
+        if bytes_porcessed = device.driver.handle(@full_buffer.b)
           Extface.redis_block do |r|
             r.set device.uuid, r.get(device.uuid)[bytes_porcessed]
           end

data/app/models/extface/driver/daisy/commands_fx1200.rb

@@ -1,5 +1,14 @@
 module Extface
   module Driver::Daisy::CommandsFx1200
+  
+    STX = 0x01
+    PA1 = 0x05
+    PA2 = 0x04
+    ETX = 0x03
+    
+    NAK = 0x15
+    SYN = 0x16
+    
     module Init
       DATE_TIME           = 0x3d
       PRINT_OPTIONS       = 0x2b
@@ -81,8 +90,8 @@ module Extface
     end
     
     module Printer
-      CUT   = 0x2c
-      MOVE  = 0x2d
+      MOVE   = 0x2c
+      CUT  = 0x2d
     end
     
     module Other

data/app/models/extface/driver/daisy_fx1200.rb

@@ -21,32 +21,278 @@ module Extface
     RAW = true  #responds to #push(data) and #pull
     PRINT = false #POS, slip printers
     FISCAL = true #cash registers, fiscal printers
-    REPORT = false #only transmit data that must be parsed by handler, CDR, report devices    
+    REPORT = false #only transmit data that must be parsed by handler, CDR, report devices  
+    
+    RESPONSE_TIMEOUT = 6  #seconds
+    INVALID_FRAME_RETRIES = 6  #seconds
+    
+    TAX_GROUPS_MAP = {
+      1 => "\xc0",
+      2 => "\xc1",
+      3 => "\xc2",
+      4 => "\xc3",
+      5 => "\xc4",
+      6 => "\xc5",
+      7 => "\xc6",
+      8 => "\xc7"
+    }
     
     has_serial_config
+    
+    include Extface::Driver::Daisy::CommandsFx1200
 
-    def handle(buffer)
-      rpush buffer
-      return buffer.length # return number of bytes processed
+    def handle(buffer) #buffer is filled with multiple pushes, wait for full frame (ACKs)STX..PA2..PA1..ETX
+      if buffer[/^\x16+$/] # skip if only ACKs
+        return buffer.length 
+      else
+        if frame_len = buffer.index("\x03") || buffer.index("\x15")
+          rpush buffer[0..frame_len]
+          return frame_len+1 # return number of bytes processed
+        else
+          #TODO check buffer.length
+          return 0 #no bytes processed
+        end
+      end
+      return buffer.length 
+    end
+    
+    def autocut(partial = true) # return "P" - success, "F" - failed
+      resp = fsend(Printer::CUT)
+      resp == "P"
+    end
+     
+    def non_fiscal_test
+      device.session("Non Fiscal Text") do |s|
+        s.notify "Printing Non Fiscal Text"
+        s.fsend Sales::START_NON_FISCAL_DOC
+        s.fsend Sales::PRINT_NON_FISCAL_TEXT, "********************************"
+        s.fsend Sales::PRINT_NON_FISCAL_TEXT, "Extface Print Test".center(32)
+        s.fsend Sales::PRINT_NON_FISCAL_TEXT, "********************************"
+        s.fsend Printer::MOVE, "1"
+        s.fsend Sales::PRINT_NON_FISCAL_TEXT, "Driver: " + "#{self.class::NAME}".truncate(24)
+        s.fsend(Sales::END_NON_FISCAL_DOC)
+        s.notify "Printing finished"
+      end
+    end
+    
+    def fiscal_test
+      sale_and_pay_items_session([
+        { price: 0.01, text1: "Extface Test" }
+      ])
+    end
+    
+    def build_sale_data(price, text1 = nil, text2 = nil, tax_group = 2, qty = nil, percent = nil, neto = nil)
+      "".tap() do |data|
+        data << text1 unless text1.blank?
+        data << "\x0a#{text2}" unless text2.blank?
+        data << "\t"
+        data << TAX_GROUPS_MAP[tax_group || 2]
+        data << price.to_s
+        data << "*#{qty.to_s}" unless qty.blank?
+        data << ",#{percent}" unless percent.blank?
+        data << "$#{neto}" unless neto.blank?
+      end
+    end
+    
+    def sale_and_pay_items_session(items = [], operator = "1", password = "1")
+      device.session("Fiscal Doc") do |s|
+        s.notify "Fiscal Doc Start"
+        s.fsend Sales::START_FISCAL_DOC, "#{operator},#{password},00001"
+        items.each do |item|
+          s.fsend Sales::SALE_AND_SHOW, build_sale_data(item[:price], item[:text1], item[:text2], item[:tax_group], item[:qty], item[:percent], item[:neto])
+        end
+        s.fsend(Sales::TOTAL, "\t")
+        s.fsend(Sales::END_FISCAL_DOC)
+        s.notify "Fiscal Doc End"
+      end
+    end
+    
+    def z_report_session
+      device.session("Z Report") do |s|
+        s.notify "Z Report Start"
+        s.fsend Closure::DAY_FIN_REPORT, "0"
+        s.notify "Z Report End"
+      end
+    end
+    
+    def x_report_session
+      device.session("X Report") do |s|
+        s.notify "X Report Start"
+        s.fsend Closure::DAY_FIN_REPORT, "2"
+        s.notify "X Report End"
+      end
+    end
+    
+    def cancel_doc_session
+      device.session("Doc cancel") do |s|
+        s.notify "Doc Cancel Start"
+        s.fsend Sales::CANCEL_DOC
+        s.notify "Doc Cancel End"
+      end
     end
     
-    def autocut(partial = true)
-      # <ESC> “d” “0” - Full-cut command
-      # <ESC> “d” “1” - Partial-cut command
-      #push build_packet(CMD)
-      #push partial ? "\x1B\x64\x31" : "\x1B\x64\x30"
+    def check_status
+      flush
+      fsend(Info::STATUS) # return 6 byte status
+      errors.empty?
     end
     
-    private
-      def build_packet(cmd, data)
+    def build_packet(cmd, data = "")
+      String.new.tap() do |packet|
+        packet << STX
+        packet << 0x20 + 4 + data.length
+        packet << sequence_number
+        packet << cmd
+        packet << data
+        packet << PA1
+        packet << bcc(packet[1..-1])
+        packet << ETX
+      end
+    end
+    
+    def fsend!(cmd, data = "") # return data or raise
+      push build_packet(cmd, data) # return 6 byte status
+      if resp = frecv(RESPONSE_TIMEOUT)
+        return resp.data if resp.valid?
+      else
+        raise errors.full_messages.join(', ')
+      end
+    end
+    
+    def fsend(cmd, data = "") #return data or nil
+      packet_data = build_packet(cmd, data)
+      result = false
+      INVALID_FRAME_RETRIES.times do |retries|
+        errors.clear
+        push packet_data
+        if resp = frecv(RESPONSE_TIMEOUT)
+          if resp.valid?
+            result = resp.data
+            break
+          end
+        end
+        errors.add :base, "#{INVALID_FRAME_RETRIES} Broken Packets Received. Abort!"
+      end
+      return result
+    end
+    
+    def frecv(timeout) # return RespFrame or nil
+      if frame_bytes = pull(timeout)
+        return RespFrame.new(frame_bytes.b)
+      else
+        errors.add :base, "No data received from device"
+        return nil
+      end
+    end
+   
+    #private 
+      def bcc(buffer)
+        sum = 0
+        buffer.each_byte do |byte|
+          sum += byte
+        end
+        "".tap() do |bcc|
+          4.times do |halfbyte|
+            bcc.insert 0, (0x30 + ((sum >> (halfbyte*4)) & 0x0f)).chr
+          end
+        end
+      end
+      
+      def sequence_number(increment = true)
+        @seq ||= 0x1f
+        @seq += 1 if increment
+        @seq = 0x1f if @seq == 0x7f
+        @seq
+      end
+      
+      def human_status_errors(status) #6 bytes status
+        errors.add :base, "Fiscal Device General Error" unless (status[0].ord & 0x20).zero?
+        errors.add :base, "Invalid Command" unless (status[0].ord & 0x02).zero?
+        errors.add :base, "Date & Time Not Set" unless (status[0].ord & 0x04).zero?
+        errors.add :base, "Syntax Error" unless (status[0].ord & 0x02).zero?
+        
+        errors.add :base, "Wrong Password" unless (status[1].ord & 0x40).zero?
+        errors.add :base, "Cutter Error" unless (status[1].ord & 0x20).zero?
+        errors.add :base, "Unpermitted Command In This Mode" unless (status[1].ord & 0x02).zero?
+        errors.add :base, "Field Overflow" unless (status[1].ord & 0x01).zero?
+        
+        #errors.add :base, "Print Doc Allowed" unless (status[2].ord & 0x40).zero?
+        #errors.add :base, "Non Fiscal Doc Open" unless (status[2].ord & 0x20).zero?
+        errors.add :base, "Less Paper (Control)" unless (status[2].ord & 0x20).zero?
+        #errors.add :base, "Fiscal Doc Open" unless (status[2].ord & 0x08).zero?
+        errors.add :base, "No Paper (Control)" unless (status[2].ord & 0x04).zero?
+        errors.add :base, "Less Paper" unless (status[2].ord & 0x02).zero?
+        errors.add :base, "No Paper" unless (status[2].ord & 0x01).zero?
         
+        case (status[3] & 0x7f)
+          when 1 then errors.add :base, "Operation will result in the overflow"
+          when 3 then errors.add :base, "No more sales for this doc"
+          when 4 then errors.add :base, "No more payments for this doc"
+          when 5 then errors.add :base, "Null transaction attempt"
+          when 6 then errors.add :base, "Sale not allowed"
+          when 7 then errors.add :base, "No rights for this operation"
+          when 8 then errors.add :base, "Tax group forbidden"
+          when 11 then errors.add :base, "Multiple decimal points"
+          when 12 then errors.add :base, "Multiple sign symbols"
+          when 13 then errors.add :base, "Sign not at first position"
+          when 14 then errors.add :base, "Wrong symbol"
+          when 15 then errors.add :base, "Too many symbols after decimal point"
+          when 16 then errors.add :base, "Too many symbols"
+          when 20 then errors.add :base, "Service not allowed"
+          when 21 then errors.add :base, "Wrong Value"
+          when 22 then errors.add :base, "Disabled operation"
+          when 23 then errors.add :base, "Deep void after discount"
+          when 24 then errors.add :base, "Deep void for not existing record"
+          when 24 then errors.add :base, "Payment without sale"
+        end
+        
+        errors.add :base, "General Fiscal Memory Error" unless (status[4].ord & 0x20).zero?
+        errors.add :base, "Fiscal Memory Full" unless (status[4].ord & 0x10).zero?
+        errors.add :base, "Less Than 50 Fiscal Records" unless (status[4].ord & 0x08).zero?
+        errors.add :base, "Invalid Fiscal Records" unless (status[4].ord & 0x04).zero?
+        errors.add :base, "Fiscal Write Error" unless (status[4].ord & 0x01).zero?
+        
+        #errors.add :base, "Fiscal Memory Ready" unless (status[5].ord & 0x40).zero?
+        #errors.add :base, "Fiscal ID Set" unless (status[5].ord & 0x20).zero?
+        #errors.add :base, "Fiscal Tax set" unless (status[5].ord & 0x10).zero?
+        #errors.add :base, "Real Sales Mode" unless (status[5].ord & 0x80).zero?
+        errors.add :base, "Fiscal Memory Full" unless (status[5].ord & 0x01).zero?
       end
       
-      def bcc(data)
-        bcc = 0
-        data.each_byte do |byte|
-          bcc += byte
+      class RespFrame
+        include ActiveModel::Validations
+        attr_reader :frame, :len, :seq, :cmd, :data, :status, :bcc
+        
+        validates_presence_of :frame
+        #validate :bcc_validation
+        #validate :len_validation
+        
+        def initialize(buffer)
+          # test Extface::Driver::DaisyFx1200::RespFrame.new("\x16\x16\x01\x2c\x20\x2dP\x04SSSSSS\x05\BBBB\x03")
+          #                              LEN   SEQ   CMD DATA    STATUS      BCC
+          if match = buffer.match(/\x01(.{1})(.{1})(.{1})(.*)\x04(.{6})\x05(.{4})\x03/n)
+            @frame = match.string[match.pre_match.length..-1]
+            @len, @seq, @cmd, @data, @status, @bcc = match.captures
+          end
         end
+        
+        private
+          def bcc_validation
+            sum = 0
+            frame[1..-6].each_byte do |byte|
+              sum += byte
+            end
+            calc_bcc = "".tap() do |tbcc|
+              4.times do |halfbyte|
+                tbcc.insert 0, (0x30 + ((sum >> (halfbyte*4)) & 0x0f)).chr
+              end
+            end
+            errors.add(:bcc, I18n.t('errors.messages.invalid')) if bcc != calc_bcc
+          end
+          
+          def len_validation
+            errors.add(:len, I18n.t('errors.messages.invalid')) if len.ord != (frame[1..-6].length + 0x20)
+          end
       end
   end
 end

data/app/models/extface/driver/epson/fiscal.rb

@@ -1,4 +1,76 @@
 module Extface
   module Driver::Epson::Fiscal
+    STX = 0x02
+    ETX = 0x03
+    SEP = 0x1c
+    DC2 = 0x12
+    DC4 = 0x14
+    NAK = 0x15
+    
+    module Control
+      STATUS_IF             = 0x38
+      X_Z_REPORTS           = 0x39
+      FISC_MEM_REPORT_DATE  = 0x3a
+      FISC_MEM_REPORT       = 0x3b
+    end
+    module Vouchers
+      OPEN_FISCAL_VOUCHER   = 0x40
+      PRINT_FISCAL_TEXT     = 0x41
+      PRINT_FISCAL_ARTICLE  = 0x42
+      SUBTOTAL_FISCAL       = 0x43
+      FISCAL_VOUCHER        = 0x44  # pay / cancel / discount in
+      CLOSE_FISCAL_VOUCHER  = 0x45
+    end
+    module NonFiscal
+      OPEN_NON_FISCAL_DOC   = 0x48
+      PRINT_NON_FISCAL_TEXT = 0x49
+      CLOSE_NON_FISCAL_DOC  = 0x4a
+    end
+    module Printer
+      CUT_PAPER         = 0x4b
+      ADVANCE_PAPER     = 0x50
+      ACTIVATE_SLIP     = 0xa0 #TMU950, TMU675
+      DISABLE_SLIP      = 0xa1
+      FORMAT_CHECKS     = 0xaa
+      FORMAT_ENDOSEMENT = 0xab
+    end
+    module General
+      SET_DATE_HOUR   = 0x58
+      GET_DATE_HOUR   = 0x59
+      HEADED          = 0x5d
+      FOOT_OF_PAGE    = 0x5e
+      OPEN_DRAWER_1   = 0x7b
+      OPEN_DRAWER_2   = 0x7c
+    end
+
+    def build_packet(cmd, fields = [])
+      String.new.tap() do |frame|
+        frame << STX
+        frame << sequence_number
+        frame << cmd
+        fields.each do |field|
+          frame << SEP
+          frame << field
+        end
+        frame << ETX
+        frame << bcc(frame)
+      end
+    end
+    
+    private
+      def bcc(buffer)
+        sum = 0
+        buffer.each_byte do |b|
+          sum += b
+        end
+        sum.to_s(16).rjust(4, '0')
+      end
+      
+      def sequence_number(increment = true)
+        @seq ||= 0x20
+        @seq += 1 if increment
+        @seq = 0x20 if @seq == 0x7f
+        @seq
+      end 
   end
 end

data/app/views/extface/devices/show.html.erb

@@ -69,6 +69,13 @@
 <% if @device.print? %>
   <%= button_to 'Print Test Page', test_page_device_path(@device), remote: true, name: :test_page, value: true, class: 'btn btn-warning' %>
 <% end %>
+<% if @device.fiscal? %>
+  <%= button_to 'Non Fiscal Test', fiscal_device_path(@device), remote: true, name: :non_fiscal_test, value: true, class: 'btn btn-warning' %>
+  <%= button_to 'Fiscal Test', fiscal_device_path(@device), remote: true, name: :fiscal_test, value: true, class: 'btn btn-warning' %>
+  <%= button_to 'X Report', fiscal_device_path(@device), remote: true, name: :x_report, value: true, class: 'btn btn-warning' %>
+  <%= button_to 'Z Report', fiscal_device_path(@device), remote: true, name: :z_report, value: true, class: 'btn btn-warning' %>
+  <%= button_to 'Cancel Fiscal Doc', fiscal_device_path(@device), remote: true, name: :cancel_fiscal_doc, value: true, class: 'btn btn-warning' %>
+<% end %>
 
 <br />Simulate push data from device
 

data/config/routes.rb

@@ -4,6 +4,7 @@ Extface::Engine.routes.draw do
   resources :devices do
     resources :jobs, only: [:show]
     post :test_page, on: :member
+    post :fiscal, on: :member
   end
   
   get ':device_uuid' => 'handler#pull', as: :pull

data/lib/extface/version.rb

@@ -1,3 +1,3 @@
 module Extface
-  VERSION = "0.1.7"
+  VERSION = "0.1.8"
 end

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: extface
 version: !ruby/object:Gem::Version
-  version: 0.1.7
+  version: 0.1.8
 platform: ruby
 authors:
 - Alex Vangelov
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2014-05-13 00:00:00.000000000 Z
+date: 2014-05-17 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: rails